lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
4f615d575c
android_kernel_xiaomi_sm8350/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
Magnus Damm 657bf0bd06 sh: LCDC start_transfer() for the KFR2R09 board 
This patch adds a ->start_transfer() callback to the
KFR2R09 lcd handling code. The callback is used to
notify the lcd controller that a new frame of data
is about to be transferred. The callback is only used
in combination with deferred io, but the code has
been tested both with and without deferred io enabled.

Without this patch the display data on the KFR2R09
lcd panel becomes corrupted over time.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09 12:40:45 +09:00

339 lines
7.9 KiB
C
Raw Blame History

/*
* KFR2R09 LCD panel support
*
* Copyright (C) 2009 Magnus Damm
*
* Register settings based on the out-of-tree t33fb.c driver
* Copyright (C) 2008 Lineo Solutions, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <video/sh_mobile_lcdc.h>
#include <mach/kfr2r09.h>
#include <cpu/sh7724.h>
/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
* up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
* communicating with the main port of the LCDC using an 18-bit SYS interface.
*
* The device code for this LCD module is 0x01221517.
*/
static const unsigned char data_frame_if[] = {
0x02, /* WEMODE: 1=cont, 0=one-shot */
0x00, 0x00,
0x00, /* EPF, DFM */
0x02, /* RIM[1] : 1 (18bpp) */
};
static const unsigned char data_panel[] = {
0x0b,
0x63, /* 400 lines */
0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
};
static const unsigned char data_timing[] = {
0x00, 0x00, 0x13, 0x08, 0x08,
};
static const unsigned char data_timing_src[] = {
0x11, 0x01, 0x00, 0x01,
};
static const unsigned char data_gamma[] = {
0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00,
0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
};
static const unsigned char data_power[] = {
0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a,
};
static unsigned long read_reg(void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
{
return so->read_data(sohandle);
}
static void write_reg(void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so,
int i, unsigned long v)
{
if (i)
so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
else
so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
}
static void write_data(void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so,
unsigned char const *data, int no_data)
{
int i;
for (i = 0; i < no_data; i++)
write_reg(sohandle, so, 1, data[i]);
}
static unsigned long read_device_code(void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
{
unsigned long device_code;
/* access protect OFF */
write_reg(sohandle, so, 0, 0xb0);
write_reg(sohandle, so, 1, 0x00);
/* deep standby OFF */
write_reg(sohandle, so, 0, 0xb1);
write_reg(sohandle, so, 1, 0x00);
/* device code command */
write_reg(sohandle, so, 0, 0xbf);
mdelay(50);
/* dummy read */
read_reg(sohandle, so);
/* read device code */
device_code = ((read_reg(sohandle, so) & 0xff) << 24);
device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
device_code |= (read_reg(sohandle, so) & 0xff);
return device_code;
}
static void write_memory_start(void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
{
write_reg(sohandle, so, 0, 0x2c);
}
static void clear_memory(void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
{
int i;
/* write start */
write_memory_start(sohandle, so);
/* paint it black */
for (i = 0; i < (240 * 400); i++)
write_reg(sohandle, so, 1, 0x00);
}
static void display_on(void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
{
/* access protect off */
write_reg(sohandle, so, 0, 0xb0);
write_reg(sohandle, so, 1, 0x00);
/* exit deep standby mode */
write_reg(sohandle, so, 0, 0xb1);
write_reg(sohandle, so, 1, 0x00);
/* frame memory I/F */
write_reg(sohandle, so, 0, 0xb3);
write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
/* display mode and frame memory write mode */
write_reg(sohandle, so, 0, 0xb4);
write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
/* panel */
write_reg(sohandle, so, 0, 0xc0);
write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
/* timing (normal) */
write_reg(sohandle, so, 0, 0xc1);
write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
/* timing (partial) */
write_reg(sohandle, so, 0, 0xc2);
write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
/* timing (idle) */
write_reg(sohandle, so, 0, 0xc3);
write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
/* timing (source/VCOM/gate driving) */
write_reg(sohandle, so, 0, 0xc4);
write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
/* gamma (red) */
write_reg(sohandle, so, 0, 0xc8);
write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
/* gamma (green) */
write_reg(sohandle, so, 0, 0xc9);
write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
/* gamma (blue) */
write_reg(sohandle, so, 0, 0xca);
write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
/* power (common) */
write_reg(sohandle, so, 0, 0xd0);
write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
/* VCOM */
write_reg(sohandle, so, 0, 0xd1);
write_reg(sohandle, so, 1, 0x00);
write_reg(sohandle, so, 1, 0x0f);
write_reg(sohandle, so, 1, 0x02);
/* power (normal) */
write_reg(sohandle, so, 0, 0xd2);
write_reg(sohandle, so, 1, 0x63);
write_reg(sohandle, so, 1, 0x24);
/* power (partial) */
write_reg(sohandle, so, 0, 0xd3);
write_reg(sohandle, so, 1, 0x63);
write_reg(sohandle, so, 1, 0x24);
/* power (idle) */
write_reg(sohandle, so, 0, 0xd4);
write_reg(sohandle, so, 1, 0x63);
write_reg(sohandle, so, 1, 0x24);
write_reg(sohandle, so, 0, 0xd8);
write_reg(sohandle, so, 1, 0x77);
write_reg(sohandle, so, 1, 0x77);
/* TE signal */
write_reg(sohandle, so, 0, 0x35);
write_reg(sohandle, so, 1, 0x00);
/* TE signal line */
write_reg(sohandle, so, 0, 0x44);
write_reg(sohandle, so, 1, 0x00);
write_reg(sohandle, so, 1, 0x00);
/* column address */
write_reg(sohandle, so, 0, 0x2a);
write_reg(sohandle, so, 1, 0x00);
write_reg(sohandle, so, 1, 0x00);
write_reg(sohandle, so, 1, 0x00);
write_reg(sohandle, so, 1, 0xef);
/* page address */
write_reg(sohandle, so, 0, 0x2b);
write_reg(sohandle, so, 1, 0x00);
write_reg(sohandle, so, 1, 0x00);
write_reg(sohandle, so, 1, 0x01);
write_reg(sohandle, so, 1, 0x8f);
/* exit sleep mode */
write_reg(sohandle, so, 0, 0x11);
mdelay(120);
/* clear vram */
clear_memory(sohandle, so);
/* display ON */
write_reg(sohandle, so, 0, 0x29);
mdelay(1);
write_memory_start(sohandle, so);
}
int kfr2r09_lcd_setup(void *board_data, void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
{
/* power on */
gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
gpio_set_value(GPIO_PTE4, 0); /* LCD_RST/ -> L */
gpio_set_value(GPIO_PTF4, 1); /* PROTECT/ -> H */
udelay(1100);
gpio_set_value(GPIO_PTE4, 1); /* LCD_RST/ -> H */
udelay(10);
gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
mdelay(20);
if (read_device_code(sohandle, so) != 0x01221517)
return -ENODEV;
pr_info("KFR2R09 WQVGA LCD Module detected.\n");
display_on(sohandle, so);
return 0;
}
void kfr2r09_lcd_start(void *board_data, void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
{
write_memory_start(sohandle, so);
}
#define CTRL_CKSW 0x10
#define CTRL_C10 0x20
#define CTRL_CPSW 0x80
#define MAIN_MLED4 0x40
#define MAIN_MSW 0x80
static int kfr2r09_lcd_backlight(int on)
{
struct i2c_adapter *a;
struct i2c_msg msg;
unsigned char buf[2];
int ret;
a = i2c_get_adapter(0);
if (!a)
return -ENODEV;
buf[0] = 0x00;
if (on)
buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
else
buf[1] = 0;
msg.addr = 0x75;
msg.buf = buf;
msg.len = 2;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
if (ret != 1)
return -ENODEV;
buf[0] = 0x01;
if (on)
buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
else
buf[1] = 0;
msg.addr = 0x75;
msg.buf = buf;
msg.len = 2;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
if (ret != 1)
return -ENODEV;
return 0;
}
void kfr2r09_lcd_on(void *board_data)
{
kfr2r09_lcd_backlight(1);
}
void kfr2r09_lcd_off(void *board_data)
{
kfr2r09_lcd_backlight(0);
}
Reference in New Issue View Git Blame Copy Permalink