lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
51bbc9c3e8
android_kernel_xiaomi_sm8350/drivers/usb/gadget/goku_udc.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2 
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

1985 lines
49 KiB
C
Raw Blame History

/*
* Toshiba TC86C001 ("Goku-S") USB Device Controller driver
*
* Copyright (C) 2000-2002 Lineo
* by Stuart Lynne, Tom Rushworth, and Bruce Balden
* Copyright (C) 2002 Toshiba Corporation
* Copyright (C) 2003 MontaVista Software (source@mvista.com)
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* This device has ep0 and three semi-configurable bulk/interrupt endpoints.
*
* - Endpoint numbering is fixed: ep{1,2,3}-bulk
* - Gadget drivers can choose ep maxpacket (8/16/32/64)
* - Gadget drivers can choose direction (IN, OUT)
* - DMA works with ep1 (OUT transfers) and ep2 (IN transfers).
*/
#undef DEBUG
// #define VERBOSE /* extra debug messages (success too) */
// #define USB_TRACE /* packet-level success messages */
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
#include <linux/usb_ch9.h>
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
#include "goku_udc.h"
#define DRIVER_DESC "TC86C001 USB Device Controller"
#define DRIVER_VERSION "30-Oct 2003"
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
static const char driver_name [] = "goku_udc";
static const char driver_desc [] = DRIVER_DESC;
MODULE_AUTHOR("source@mvista.com");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* IN dma behaves ok under testing, though the IN-dma abort paths don't
* seem to behave quite as expected. Used by default.
*
* OUT dma documents design problems handling the common "short packet"
* transfer termination policy; it couldn't enabled by default, even
* if the OUT-dma abort problems had a resolution.
*/
static unsigned use_dma = 1;
#if 0
//#include <linux/moduleparam.h>
/* "modprobe goku_udc use_dma=1" etc
* 0 to disable dma
* 1 to use IN dma only (normal operation)
* 2 to use IN and OUT dma
*/
module_param(use_dma, uint, S_IRUGO);
#endif
/*-------------------------------------------------------------------------*/
static void nuke(struct goku_ep *, int status);
static inline void
command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum)
{
writel(COMMAND_EP(epnum) | command, &regs->Command);
udelay(300);
}
static int
goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
{
struct goku_udc *dev;
struct goku_ep *ep;
u32 mode;
u16 max;
unsigned long flags;
ep = container_of(_ep, struct goku_ep, ep);
if (!_ep || !desc || ep->desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
dev = ep->dev;
if (ep == &dev->ep[0])
return -EINVAL;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
if (ep->num != (desc->bEndpointAddress & 0x0f))
return -EINVAL;
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
break;
default:
return -EINVAL;
}
if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK)
!= EPxSTATUS_EP_INVALID)
return -EBUSY;
/* enabling the no-toggle interrupt mode would need an api hook */
mode = 0;
max = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
switch (max) {
case 64: mode++;
case 32: mode++;
case 16: mode++;
case 8: mode <<= 3;
break;
default:
return -EINVAL;
}
mode |= 2 << 1; /* bulk, or intr-with-toggle */
/* ep1/ep2 dma direction is chosen early; it works in the other
* direction, with pio. be cautious with out-dma.
*/
ep->is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0;
if (ep->is_in) {
mode |= 1;
ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
} else {
ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT);
if (ep->dma)
DBG(dev, "%s out-dma hides short packets\n",
ep->ep.name);
}
spin_lock_irqsave(&ep->dev->lock, flags);
/* ep1 and ep2 can do double buffering and/or dma */
if (ep->num < 3) {
struct goku_udc_regs __iomem *regs = ep->dev->regs;
u32 tmp;
/* double buffer except (for now) with pio in */
tmp = ((ep->dma || !ep->is_in)
? 0x10 /* double buffered */
: 0x11 /* single buffer */
) << ep->num;
tmp |= readl(&regs->EPxSingle);
writel(tmp, &regs->EPxSingle);
tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num;
tmp |= readl(&regs->EPxBCS);
writel(tmp, &regs->EPxBCS);
}
writel(mode, ep->reg_mode);
command(ep->dev->regs, COMMAND_RESET, ep->num);
ep->ep.maxpacket = max;
ep->stopped = 0;
ep->desc = desc;
spin_unlock_irqrestore(&ep->dev->lock, flags);
DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name,
ep->is_in ? "IN" : "OUT",
ep->dma ? "dma" : "pio",
max);
return 0;
}
static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
{
struct goku_udc *dev = ep->dev;
if (regs) {
command(regs, COMMAND_INVALID, ep->num);
if (ep->num) {
if (ep->num == UDC_MSTWR_ENDPOINT)
dev->int_enable &= ~(INT_MSTWREND
|INT_MSTWRTMOUT);
else if (ep->num == UDC_MSTRD_ENDPOINT)
dev->int_enable &= ~INT_MSTRDEND;
dev->int_enable &= ~INT_EPxDATASET (ep->num);
} else
dev->int_enable &= ~INT_EP0;
writel(dev->int_enable, &regs->int_enable);
readl(&regs->int_enable);
if (ep->num < 3) {
struct goku_udc_regs __iomem *r = ep->dev->regs;
u32 tmp;
tmp = readl(&r->EPxSingle);
tmp &= ~(0x11 << ep->num);
writel(tmp, &r->EPxSingle);
tmp = readl(&r->EPxBCS);
tmp &= ~(0x11 << ep->num);
writel(tmp, &r->EPxBCS);
}
/* reset dma in case we're still using it */
if (ep->dma) {
u32 master;
master = readl(&regs->dma_master) & MST_RW_BITS;
if (ep->num == UDC_MSTWR_ENDPOINT) {
master &= ~MST_W_BITS;
master |= MST_WR_RESET;
} else {
master &= ~MST_R_BITS;
master |= MST_RD_RESET;
}
writel(master, &regs->dma_master);
}
}
ep->ep.maxpacket = MAX_FIFO_SIZE;
ep->desc = NULL;
ep->stopped = 1;
ep->irqs = 0;
ep->dma = 0;
}
static int goku_ep_disable(struct usb_ep *_ep)
{
struct goku_ep *ep;
struct goku_udc *dev;
unsigned long flags;
ep = container_of(_ep, struct goku_ep, ep);
if (!_ep || !ep->desc)
return -ENODEV;
dev = ep->dev;
if (dev->ep0state == EP0_SUSPEND)
return -EBUSY;
VDBG(dev, "disable %s\n", _ep->name);
spin_lock_irqsave(&dev->lock, flags);
nuke(ep, -ESHUTDOWN);
ep_reset(dev->regs, ep);
spin_unlock_irqrestore(&dev->lock, flags);
return 0;
}
/*-------------------------------------------------------------------------*/
static struct usb_request *
goku_alloc_request(struct usb_ep *_ep, int gfp_flags)
{
struct goku_request *req;
if (!_ep)
return NULL;
req = kmalloc(sizeof *req, gfp_flags);
if (!req)
return NULL;
memset(req, 0, sizeof *req);
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD(&req->queue);
return &req->req;
}
static void
goku_free_request(struct usb_ep *_ep, struct usb_request *_req)
{
struct goku_request *req;
if (!_ep || !_req)
return;
req = container_of(_req, struct goku_request, req);
WARN_ON(!list_empty(&req->queue));
kfree(req);
}
/*-------------------------------------------------------------------------*/
#undef USE_KMALLOC
/* many common platforms have dma-coherent caches, which means that it's
* safe to use kmalloc() memory for all i/o buffers without using any
* cache flushing calls. (unless you're trying to share cache lines
* between dma and non-dma activities, which is a slow idea in any case.)
*
* other platforms need more care, with 2.6 having a moderately general
* solution except for the common "buffer is smaller than a page" case.
*/
#if defined(CONFIG_X86)
#define USE_KMALLOC
#elif defined(CONFIG_MIPS) && !defined(CONFIG_NONCOHERENT_IO)
#define USE_KMALLOC
#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
#define USE_KMALLOC
#endif
/* allocating buffers this way eliminates dma mapping overhead, which
* on some platforms will mean eliminating a per-io buffer copy. with
* some kinds of system caches, further tweaks may still be needed.
*/
static void *
goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
dma_addr_t *dma, int gfp_flags)
{
void *retval;
struct goku_ep *ep;
ep = container_of(_ep, struct goku_ep, ep);
if (!_ep)
return NULL;
*dma = DMA_ADDR_INVALID;
#if defined(USE_KMALLOC)
retval = kmalloc(bytes, gfp_flags);
if (retval)
*dma = virt_to_phys(retval);
#else
if (ep->dma) {
/* the main problem with this call is that it wastes memory
* on typical 1/N page allocations: it allocates 1-N pages.
*/
#warning Using dma_alloc_coherent even with buffers smaller than a page.
retval = dma_alloc_coherent(&ep->dev->pdev->dev,
bytes, dma, gfp_flags);
} else
retval = kmalloc(bytes, gfp_flags);
#endif
return retval;
}
static void
goku_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes)
{
/* free memory into the right allocator */
#ifndef USE_KMALLOC
if (dma != DMA_ADDR_INVALID) {
struct goku_ep *ep;
ep = container_of(_ep, struct goku_ep, ep);
if (!_ep)
return;
dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
} else
#endif
kfree (buf);
}
/*-------------------------------------------------------------------------*/
static void
done(struct goku_ep *ep, struct goku_request *req, int status)
{
struct goku_udc *dev;
unsigned stopped = ep->stopped;
list_del_init(&req->queue);
if (likely(req->req.status == -EINPROGRESS))
req->req.status = status;
else
status = req->req.status;
dev = ep->dev;
if (req->mapped) {
pci_unmap_single(dev->pdev, req->req.dma, req->req.length,
ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
req->req.dma = DMA_ADDR_INVALID;
req->mapped = 0;
}
#ifndef USB_TRACE
if (status && status != -ESHUTDOWN)
#endif
VDBG(dev, "complete %s req %p stat %d len %u/%u\n",
ep->ep.name, &req->req, status,
req->req.actual, req->req.length);
/* don't modify queue heads during completion callback */
ep->stopped = 1;
spin_unlock(&dev->lock);
req->req.complete(&ep->ep, &req->req);
spin_lock(&dev->lock);
ep->stopped = stopped;
}
/*-------------------------------------------------------------------------*/
static inline int
write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max)
{
unsigned length, count;
length = min(req->req.length - req->req.actual, max);
req->req.actual += length;
count = length;
while (likely(count--))
writel(*buf++, fifo);
return length;
}
// return: 0 = still running, 1 = completed, negative = errno
static int write_fifo(struct goku_ep *ep, struct goku_request *req)
{
struct goku_udc *dev = ep->dev;
u32 tmp;
u8 *buf;
unsigned count;
int is_last;
tmp = readl(&dev->regs->DataSet);
buf = req->req.buf + req->req.actual;
prefetch(buf);
dev = ep->dev;
if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN))
return -EL2HLT;
/* NOTE: just single-buffered PIO-IN for now. */
if (unlikely((tmp & DATASET_A(ep->num)) != 0))
return 0;
/* clear our "packet available" irq */
if (ep->num != 0)
writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status);
count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket);
/* last packet often short (sometimes a zlp, especially on ep0) */
if (unlikely(count != ep->ep.maxpacket)) {
writel(~(1<<ep->num), &dev->regs->EOP);
if (ep->num == 0) {
dev->ep[0].stopped = 1;
dev->ep0state = EP0_STATUS;
}
is_last = 1;
} else {
if (likely(req->req.length != req->req.actual)
|| req->req.zero)
is_last = 0;
else
is_last = 1;
}
#if 0 /* printk seemed to trash is_last...*/
//#ifdef USB_TRACE
VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n",
ep->ep.name, count, is_last ? "/last" : "",
req->req.length - req->req.actual, req);
#endif
/* requests complete when all IN data is in the FIFO,
* or sometimes later, if a zlp was needed.
*/
if (is_last) {
done(ep, req, 0);
return 1;
}
return 0;
}
static int read_fifo(struct goku_ep *ep, struct goku_request *req)
{
struct goku_udc_regs __iomem *regs;
u32 size, set;
u8 *buf;
unsigned bufferspace, is_short, dbuff;
regs = ep->dev->regs;
top:
buf = req->req.buf + req->req.actual;
prefetchw(buf);
if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT))
return -EL2HLT;
dbuff = (ep->num == 1 || ep->num == 2);
do {
/* ack dataset irq matching the status we'll handle */
if (ep->num != 0)
writel(~INT_EPxDATASET(ep->num), &regs->int_status);
set = readl(&regs->DataSet) & DATASET_AB(ep->num);
size = readl(&regs->EPxSizeLA[ep->num]);
bufferspace = req->req.length - req->req.actual;
/* usually do nothing without an OUT packet */
if (likely(ep->num != 0 || bufferspace != 0)) {
if (unlikely(set == 0))
break;
/* use ep1/ep2 double-buffering for OUT */
if (!(size & PACKET_ACTIVE))
size = readl(&regs->EPxSizeLB[ep->num]);
if (!(size & PACKET_ACTIVE)) // "can't happen"
break;
size &= DATASIZE; /* EPxSizeH == 0 */
/* ep0out no-out-data case for set_config, etc */
} else
size = 0;
/* read all bytes from this packet */
req->req.actual += size;
is_short = (size < ep->ep.maxpacket);
#ifdef USB_TRACE
VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n",
ep->ep.name, size, is_short ? "/S" : "",
req, req->req.actual, req->req.length);
#endif
while (likely(size-- != 0)) {
u8 byte = (u8) readl(ep->reg_fifo);
if (unlikely(bufferspace == 0)) {
/* this happens when the driver's buffer
* is smaller than what the host sent.
* discard the extra data in this packet.
*/
if (req->req.status != -EOVERFLOW)
DBG(ep->dev, "%s overflow %u\n",
ep->ep.name, size);
req->req.status = -EOVERFLOW;
} else {
*buf++ = byte;
bufferspace--;
}
}
/* completion */
if (unlikely(is_short || req->req.actual == req->req.length)) {
if (unlikely(ep->num == 0)) {
/* non-control endpoints now usable? */
if (ep->dev->req_config)
writel(ep->dev->configured
? USBSTATE_CONFIGURED
: 0,
&regs->UsbState);
/* ep0out status stage */
writel(~(1<<0), &regs->EOP);
ep->stopped = 1;
ep->dev->ep0state = EP0_STATUS;
}
done(ep, req, 0);
/* empty the second buffer asap */
if (dbuff && !list_empty(&ep->queue)) {
req = list_entry(ep->queue.next,
struct goku_request, queue);
goto top;
}
return 1;
}
} while (dbuff);
return 0;
}
static inline void
pio_irq_enable(struct goku_udc *dev,
struct goku_udc_regs __iomem *regs, int epnum)
{
dev->int_enable |= INT_EPxDATASET (epnum);
writel(dev->int_enable, &regs->int_enable);
/* write may still be posted */
}
static inline void
pio_irq_disable(struct goku_udc *dev,
struct goku_udc_regs __iomem *regs, int epnum)
{
dev->int_enable &= ~INT_EPxDATASET (epnum);
writel(dev->int_enable, &regs->int_enable);
/* write may still be posted */
}
static inline void
pio_advance(struct goku_ep *ep)
{
struct goku_request *req;
if (unlikely(list_empty (&ep->queue)))
return;
req = list_entry(ep->queue.next, struct goku_request, queue);
(ep->is_in ? write_fifo : read_fifo)(ep, req);
}
/*-------------------------------------------------------------------------*/
// return: 0 = q running, 1 = q stopped, negative = errno
static int start_dma(struct goku_ep *ep, struct goku_request *req)
{
struct goku_udc_regs __iomem *regs = ep->dev->regs;
u32 master;
u32 start = req->req.dma;
u32 end = start + req->req.length - 1;
master = readl(&regs->dma_master) & MST_RW_BITS;
/* re-init the bits affecting IN dma; careful with zlps */
if (likely(ep->is_in)) {
if (unlikely(master & MST_RD_ENA)) {
DBG (ep->dev, "start, IN active dma %03x!!\n",
master);
// return -EL2HLT;
}
writel(end, &regs->in_dma_end);
writel(start, &regs->in_dma_start);
master &= ~MST_R_BITS;
if (unlikely(req->req.length == 0))
master = MST_RD_ENA | MST_RD_EOPB;
else if ((req->req.length % ep->ep.maxpacket) != 0
|| req->req.zero)
master = MST_RD_ENA | MST_EOPB_ENA;
else
master = MST_RD_ENA | MST_EOPB_DIS;
ep->dev->int_enable |= INT_MSTRDEND;
/* Goku DMA-OUT merges short packets, which plays poorly with
* protocols where short packets mark the transfer boundaries.
* The chip supports a nonstandard policy with INT_MSTWRTMOUT,
* ending transfers after 3 SOFs; we don't turn it on.
*/
} else {
if (unlikely(master & MST_WR_ENA)) {
DBG (ep->dev, "start, OUT active dma %03x!!\n",
master);
// return -EL2HLT;
}
writel(end, &regs->out_dma_end);
writel(start, &regs->out_dma_start);
master &= ~MST_W_BITS;
master |= MST_WR_ENA | MST_TIMEOUT_DIS;
ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT;
}
writel(master, &regs->dma_master);
writel(ep->dev->int_enable, &regs->int_enable);
return 0;
}
static void dma_advance(struct goku_udc *dev, struct goku_ep *ep)
{
struct goku_request *req;
struct goku_udc_regs __iomem *regs = ep->dev->regs;
u32 master;
master = readl(&regs->dma_master);
if (unlikely(list_empty(&ep->queue))) {
stop:
if (ep->is_in)
dev->int_enable &= ~INT_MSTRDEND;
else
dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT);
writel(dev->int_enable, &regs->int_enable);
return;
}
req = list_entry(ep->queue.next, struct goku_request, queue);
/* normal hw dma completion (not abort) */
if (likely(ep->is_in)) {
if (unlikely(master & MST_RD_ENA))
return;
req->req.actual = readl(&regs->in_dma_current);
} else {
if (unlikely(master & MST_WR_ENA))
return;
/* hardware merges short packets, and also hides packet
* overruns. a partial packet MAY be in the fifo here.
*/
req->req.actual = readl(&regs->out_dma_current);
}
req->req.actual -= req->req.dma;
req->req.actual++;
#ifdef USB_TRACE
VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n",
ep->ep.name, ep->is_in ? "IN" : "OUT",
req->req.actual, req->req.length, req);
#endif
done(ep, req, 0);
if (list_empty(&ep->queue))
goto stop;
req = list_entry(ep->queue.next, struct goku_request, queue);
(void) start_dma(ep, req);
}
static void abort_dma(struct goku_ep *ep, int status)
{
struct goku_udc_regs __iomem *regs = ep->dev->regs;
struct goku_request *req;
u32 curr, master;
/* NAK future host requests, hoping the implicit delay lets the
* dma engine finish reading (or writing) its latest packet and
* empty the dma buffer (up to 16 bytes).
*
* This avoids needing to clean up a partial packet in the fifo;
* we can't do that for IN without side effects to HALT and TOGGLE.
*/
command(regs, COMMAND_FIFO_DISABLE, ep->num);
req = list_entry(ep->queue.next, struct goku_request, queue);
master = readl(&regs->dma_master) & MST_RW_BITS;
/* FIXME using these resets isn't usably documented. this may
* not work unless it's followed by disabling the endpoint.
*
* FIXME the OUT reset path doesn't even behave consistently.
*/
if (ep->is_in) {
if (unlikely((readl(&regs->dma_master) & MST_RD_ENA) == 0))
goto finished;
curr = readl(&regs->in_dma_current);
writel(curr, &regs->in_dma_end);
writel(curr, &regs->in_dma_start);
master &= ~MST_R_BITS;
master |= MST_RD_RESET;
writel(master, &regs->dma_master);
if (readl(&regs->dma_master) & MST_RD_ENA)
DBG(ep->dev, "IN dma active after reset!\n");
} else {
if (unlikely((readl(&regs->dma_master) & MST_WR_ENA) == 0))
goto finished;
curr = readl(&regs->out_dma_current);
writel(curr, &regs->out_dma_end);
writel(curr, &regs->out_dma_start);
master &= ~MST_W_BITS;
master |= MST_WR_RESET;
writel(master, &regs->dma_master);
if (readl(&regs->dma_master) & MST_WR_ENA)
DBG(ep->dev, "OUT dma active after reset!\n");
}
req->req.actual = (curr - req->req.dma) + 1;
req->req.status = status;
VDBG(ep->dev, "%s %s %s %d/%d\n", __FUNCTION__, ep->ep.name,
ep->is_in ? "IN" : "OUT",
req->req.actual, req->req.length);
command(regs, COMMAND_FIFO_ENABLE, ep->num);
return;
finished:
/* dma already completed; no abort needed */
command(regs, COMMAND_FIFO_ENABLE, ep->num);
req->req.actual = req->req.length;
req->req.status = 0;
}
/*-------------------------------------------------------------------------*/
static int
goku_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
{
struct goku_request *req;
struct goku_ep *ep;
struct goku_udc *dev;
unsigned long flags;
int status;
/* always require a cpu-view buffer so pio works */
req = container_of(_req, struct goku_request, req);
if (unlikely(!_req || !_req->complete
|| !_req->buf || !list_empty(&req->queue)))
return -EINVAL;
ep = container_of(_ep, struct goku_ep, ep);
if (unlikely(!_ep || (!ep->desc && ep->num != 0)))
return -EINVAL;
dev = ep->dev;
if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
return -ESHUTDOWN;
/* can't touch registers when suspended */
if (dev->ep0state == EP0_SUSPEND)
return -EBUSY;
/* set up dma mapping in case the caller didn't */
if (ep->dma && _req->dma == DMA_ADDR_INVALID) {
_req->dma = pci_map_single(dev->pdev, _req->buf, _req->length,
ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
req->mapped = 1;
}
#ifdef USB_TRACE
VDBG(dev, "%s queue req %p, len %u buf %p\n",
_ep->name, _req, _req->length, _req->buf);
#endif
spin_lock_irqsave(&dev->lock, flags);
_req->status = -EINPROGRESS;
_req->actual = 0;
/* for ep0 IN without premature status, zlp is required and
* writing EOP starts the status stage (OUT).
*/
if (unlikely(ep->num == 0 && ep->is_in))
_req->zero = 1;
/* kickstart this i/o queue? */
status = 0;
if (list_empty(&ep->queue) && likely(!ep->stopped)) {
/* dma: done after dma completion IRQ (or error)
* pio: done after last fifo operation
*/
if (ep->dma)
status = start_dma(ep, req);
else
status = (ep->is_in ? write_fifo : read_fifo)(ep, req);
if (unlikely(status != 0)) {
if (status > 0)
status = 0;
req = NULL;
}
} /* else pio or dma irq handler advances the queue. */
if (likely(req != 0))
list_add_tail(&req->queue, &ep->queue);
if (likely(!list_empty(&ep->queue))
&& likely(ep->num != 0)
&& !ep->dma
&& !(dev->int_enable & INT_EPxDATASET (ep->num)))
pio_irq_enable(dev, dev->regs, ep->num);
spin_unlock_irqrestore(&dev->lock, flags);
/* pci writes may still be posted */
return status;
}
/* dequeue ALL requests */
static void nuke(struct goku_ep *ep, int status)
{
struct goku_request *req;
ep->stopped = 1;
if (list_empty(&ep->queue))
return;
if (ep->dma)
abort_dma(ep, status);
while (!list_empty(&ep->queue)) {
req = list_entry(ep->queue.next, struct goku_request, queue);
done(ep, req, status);
}
}
/* dequeue JUST ONE request */
static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
struct goku_request *req;
struct goku_ep *ep;
struct goku_udc *dev;
unsigned long flags;
ep = container_of(_ep, struct goku_ep, ep);
if (!_ep || !_req || (!ep->desc && ep->num != 0))
return -EINVAL;
dev = ep->dev;
if (!dev->driver)
return -ESHUTDOWN;
/* we can't touch (dma) registers when suspended */
if (dev->ep0state == EP0_SUSPEND)
return -EBUSY;
VDBG(dev, "%s %s %s %s %p\n", __FUNCTION__, _ep->name,
ep->is_in ? "IN" : "OUT",
ep->dma ? "dma" : "pio",
_req);
spin_lock_irqsave(&dev->lock, flags);
/* make sure it's actually queued on this endpoint */
list_for_each_entry (req, &ep->queue, queue) {
if (&req->req == _req)
break;
}
if (&req->req != _req) {
spin_unlock_irqrestore (&dev->lock, flags);
return -EINVAL;
}
if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) {
abort_dma(ep, -ECONNRESET);
done(ep, req, -ECONNRESET);
dma_advance(dev, ep);
} else if (!list_empty(&req->queue))
done(ep, req, -ECONNRESET);
else
req = NULL;
spin_unlock_irqrestore(&dev->lock, flags);
return req ? 0 : -EOPNOTSUPP;
}
/*-------------------------------------------------------------------------*/
static void goku_clear_halt(struct goku_ep *ep)
{
// assert (ep->num !=0)
VDBG(ep->dev, "%s clear halt\n", ep->ep.name);
command(ep->dev->regs, COMMAND_SETDATA0, ep->num);
command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num);
if (ep->stopped) {
ep->stopped = 0;
if (ep->dma) {
struct goku_request *req;
if (list_empty(&ep->queue))
return;
req = list_entry(ep->queue.next, struct goku_request,
queue);
(void) start_dma(ep, req);
} else
pio_advance(ep);
}
}
static int goku_set_halt(struct usb_ep *_ep, int value)
{
struct goku_ep *ep;
unsigned long flags;
int retval = 0;
if (!_ep)
return -ENODEV;
ep = container_of (_ep, struct goku_ep, ep);
if (ep->num == 0) {
if (value) {
ep->dev->ep0state = EP0_STALL;
ep->dev->ep[0].stopped = 1;
} else
return -EINVAL;
/* don't change EPxSTATUS_EP_INVALID to READY */
} else if (!ep->desc) {
DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
return -EINVAL;
}
spin_lock_irqsave(&ep->dev->lock, flags);
if (!list_empty(&ep->queue))
retval = -EAGAIN;
else if (ep->is_in && value
/* data in (either) packet buffer? */
&& (readl(&ep->dev->regs->DataSet)
& DATASET_AB(ep->num)))
retval = -EAGAIN;
else if (!value)
goku_clear_halt(ep);
else {
ep->stopped = 1;
VDBG(ep->dev, "%s set halt\n", ep->ep.name);
command(ep->dev->regs, COMMAND_STALL, ep->num);
readl(ep->reg_status);
}
spin_unlock_irqrestore(&ep->dev->lock, flags);
return retval;
}
static int goku_fifo_status(struct usb_ep *_ep)
{
struct goku_ep *ep;
struct goku_udc_regs __iomem *regs;
u32 size;
if (!_ep)
return -ENODEV;
ep = container_of(_ep, struct goku_ep, ep);
/* size is only reported sanely for OUT */
if (ep->is_in)
return -EOPNOTSUPP;
/* ignores 16-byte dma buffer; SizeH == 0 */
regs = ep->dev->regs;
size = readl(&regs->EPxSizeLA[ep->num]) & DATASIZE;
size += readl(&regs->EPxSizeLB[ep->num]) & DATASIZE;
VDBG(ep->dev, "%s %s %u\n", __FUNCTION__, ep->ep.name, size);
return size;
}
static void goku_fifo_flush(struct usb_ep *_ep)
{
struct goku_ep *ep;
struct goku_udc_regs __iomem *regs;
u32 size;
if (!_ep)
return;
ep = container_of(_ep, struct goku_ep, ep);
VDBG(ep->dev, "%s %s\n", __FUNCTION__, ep->ep.name);
/* don't change EPxSTATUS_EP_INVALID to READY */
if (!ep->desc && ep->num != 0) {
DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
return;
}
regs = ep->dev->regs;
size = readl(&regs->EPxSizeLA[ep->num]);
size &= DATASIZE;
/* Non-desirable behavior: FIFO_CLEAR also clears the
* endpoint halt feature. For OUT, we _could_ just read
* the bytes out (PIO, if !ep->dma); for in, no choice.
*/
if (size)
command(regs, COMMAND_FIFO_CLEAR, ep->num);
}
static struct usb_ep_ops goku_ep_ops = {
.enable = goku_ep_enable,
.disable = goku_ep_disable,
.alloc_request = goku_alloc_request,
.free_request = goku_free_request,
.alloc_buffer = goku_alloc_buffer,
.free_buffer = goku_free_buffer,
.queue = goku_queue,
.dequeue = goku_dequeue,
.set_halt = goku_set_halt,
.fifo_status = goku_fifo_status,
.fifo_flush = goku_fifo_flush,
};
/*-------------------------------------------------------------------------*/
static int goku_get_frame(struct usb_gadget *_gadget)
{
return -EOPNOTSUPP;
}
static const struct usb_gadget_ops goku_ops = {
.get_frame = goku_get_frame,
// no remote wakeup
// not selfpowered
};
/*-------------------------------------------------------------------------*/
static inline char *dmastr(void)
{
if (use_dma == 0)
return "(dma disabled)";
else if (use_dma == 2)
return "(dma IN and OUT)";
else
return "(dma IN)";
}
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
static const char proc_node_name [] = "driver/udc";
#define FOURBITS "%s%s%s%s"
#define EIGHTBITS FOURBITS FOURBITS
static void
dump_intmask(const char *label, u32 mask, char **next, unsigned *size)
{
int t;
/* int_status is the same format ... */
t = scnprintf(*next, *size,
"%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
label, mask,
(mask & INT_PWRDETECT) ? " power" : "",
(mask & INT_SYSERROR) ? " sys" : "",
(mask & INT_MSTRDEND) ? " in-dma" : "",
(mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
(mask & INT_MSTWREND) ? " out-dma" : "",
(mask & INT_MSTWRSET) ? " wrset" : "",
(mask & INT_ERR) ? " err" : "",
(mask & INT_SOF) ? " sof" : "",
(mask & INT_EP3NAK) ? " ep3nak" : "",
(mask & INT_EP2NAK) ? " ep2nak" : "",
(mask & INT_EP1NAK) ? " ep1nak" : "",
(mask & INT_EP3DATASET) ? " ep3" : "",
(mask & INT_EP2DATASET) ? " ep2" : "",
(mask & INT_EP1DATASET) ? " ep1" : "",
(mask & INT_STATUSNAK) ? " ep0snak" : "",
(mask & INT_STATUS) ? " ep0status" : "",
(mask & INT_SETUP) ? " setup" : "",
(mask & INT_ENDPOINT0) ? " ep0" : "",
(mask & INT_USBRESET) ? " reset" : "",
(mask & INT_SUSPEND) ? " suspend" : "");
*size -= t;
*next += t;
}
static int
udc_proc_read(char *buffer, char **start, off_t off, int count,
int *eof, void *_dev)
{
char *buf = buffer;
struct goku_udc *dev = _dev;
struct goku_udc_regs __iomem *regs = dev->regs;
char *next = buf;
unsigned size = count;
unsigned long flags;
int i, t, is_usb_connected;
u32 tmp;
if (off != 0)
return 0;
local_irq_save(flags);
/* basic device status */
tmp = readl(&regs->power_detect);
is_usb_connected = tmp & PW_DETECT;
t = scnprintf(next, size,
"%s - %s\n"
"%s version: %s %s\n"
"Gadget driver: %s\n"
"Host %s, %s\n"
"\n",
pci_name(dev->pdev), driver_desc,
driver_name, DRIVER_VERSION, dmastr(),
dev->driver ? dev->driver->driver.name : "(none)",
is_usb_connected
? ((tmp & PW_PULLUP) ? "full speed" : "powered")
: "disconnected",
({char *tmp;
switch(dev->ep0state){
case EP0_DISCONNECT: tmp = "ep0_disconnect"; break;
case EP0_IDLE: tmp = "ep0_idle"; break;
case EP0_IN: tmp = "ep0_in"; break;
case EP0_OUT: tmp = "ep0_out"; break;
case EP0_STATUS: tmp = "ep0_status"; break;
case EP0_STALL: tmp = "ep0_stall"; break;
case EP0_SUSPEND: tmp = "ep0_suspend"; break;
default: tmp = "ep0_?"; break;
} tmp; })
);
size -= t;
next += t;
dump_intmask("int_status", readl(&regs->int_status), &next, &size);
dump_intmask("int_enable", readl(&regs->int_enable), &next, &size);
if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0)
goto done;
/* registers for (active) device and ep0 */
t = scnprintf(next, size, "\nirqs %lu\ndataset %02x "
"single.bcs %02x.%02x state %x addr %u\n",
dev->irqs, readl(&regs->DataSet),
readl(&regs->EPxSingle), readl(&regs->EPxBCS),
readl(&regs->UsbState),
readl(&regs->address));
size -= t;
next += t;
tmp = readl(&regs->dma_master);
t = scnprintf(next, size,
"dma %03X =" EIGHTBITS "%s %s\n", tmp,
(tmp & MST_EOPB_DIS) ? " eopb-" : "",
(tmp & MST_EOPB_ENA) ? " eopb+" : "",
(tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
(tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
(tmp & MST_RD_EOPB) ? " eopb" : "",
(tmp & MST_RD_RESET) ? " in_reset" : "",
(tmp & MST_WR_RESET) ? " out_reset" : "",
(tmp & MST_RD_ENA) ? " IN" : "",
(tmp & MST_WR_ENA) ? " OUT" : "",
(tmp & MST_CONNECTION)
? "ep1in/ep2out"
: "ep1out/ep2in");
size -= t;
next += t;
/* dump endpoint queues */
for (i = 0; i < 4; i++) {
struct goku_ep *ep = &dev->ep [i];
struct goku_request *req;
int t;
if (i && !ep->desc)
continue;
tmp = readl(ep->reg_status);
t = scnprintf(next, size,
"%s %s max %u %s, irqs %lu, "
"status %02x (%s) " FOURBITS "\n",
ep->ep.name,
ep->is_in ? "in" : "out",
ep->ep.maxpacket,
ep->dma ? "dma" : "pio",
ep->irqs,
tmp, ({ char *s;
switch (tmp & EPxSTATUS_EP_MASK) {
case EPxSTATUS_EP_READY:
s = "ready"; break;
case EPxSTATUS_EP_DATAIN:
s = "packet"; break;
case EPxSTATUS_EP_FULL:
s = "full"; break;
case EPxSTATUS_EP_TX_ERR: // host will retry
s = "tx_err"; break;
case EPxSTATUS_EP_RX_ERR:
s = "rx_err"; break;
case EPxSTATUS_EP_BUSY: /* ep0 only */
s = "busy"; break;
case EPxSTATUS_EP_STALL:
s = "stall"; break;
case EPxSTATUS_EP_INVALID: // these "can't happen"
s = "invalid"; break;
default:
s = "?"; break;
}; s; }),
(tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
(tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
(tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
(tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""
);
if (t <= 0 || t > size)
goto done;
size -= t;
next += t;
if (list_empty(&ep->queue)) {
t = scnprintf(next, size, "\t(nothing queued)\n");
if (t <= 0 || t > size)
goto done;
size -= t;
next += t;
continue;
}
list_for_each_entry(req, &ep->queue, queue) {
if (ep->dma && req->queue.prev == &ep->queue) {
if (i == UDC_MSTRD_ENDPOINT)
tmp = readl(&regs->in_dma_current);
else
tmp = readl(&regs->out_dma_current);
tmp -= req->req.dma;
tmp++;
} else
tmp = req->req.actual;
t = scnprintf(next, size,
"\treq %p len %u/%u buf %p\n",
&req->req, tmp, req->req.length,
req->req.buf);
if (t <= 0 || t > size)
goto done;
size -= t;
next += t;
}
}
done:
local_irq_restore(flags);
*eof = 1;
return count - size;
}
#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
/*-------------------------------------------------------------------------*/
static void udc_reinit (struct goku_udc *dev)
{
static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" };
unsigned i;
INIT_LIST_HEAD (&dev->gadget.ep_list);
dev->gadget.ep0 = &dev->ep [0].ep;
dev->gadget.speed = USB_SPEED_UNKNOWN;
dev->ep0state = EP0_DISCONNECT;
dev->irqs = 0;
for (i = 0; i < 4; i++) {
struct goku_ep *ep = &dev->ep[i];
ep->num = i;
ep->ep.name = names[i];
ep->reg_fifo = &dev->regs->ep_fifo [i];
ep->reg_status = &dev->regs->ep_status [i];
ep->reg_mode = &dev->regs->ep_mode[i];
ep->ep.ops = &goku_ep_ops;
list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
ep->dev = dev;
INIT_LIST_HEAD (&ep->queue);
ep_reset(NULL, ep);
}
dev->ep[0].reg_mode = NULL;
dev->ep[0].ep.maxpacket = MAX_EP0_SIZE;
list_del_init (&dev->ep[0].ep.ep_list);
}
static void udc_reset(struct goku_udc *dev)
{
struct goku_udc_regs __iomem *regs = dev->regs;
writel(0, &regs->power_detect);
writel(0, &regs->int_enable);
readl(&regs->int_enable);
dev->int_enable = 0;
/* deassert reset, leave USB D+ at hi-Z (no pullup)
* don't let INT_PWRDETECT sequence begin
*/
udelay(250);
writel(PW_RESETB, &regs->power_detect);
readl(&regs->int_enable);
}
static void ep0_start(struct goku_udc *dev)
{
struct goku_udc_regs __iomem *regs = dev->regs;
unsigned i;
VDBG(dev, "%s\n", __FUNCTION__);
udc_reset(dev);
udc_reinit (dev);
//writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, &regs->dma_master);
/* hw handles set_address, set_feature, get_status; maybe more */
writel( G_REQMODE_SET_INTF | G_REQMODE_GET_INTF
| G_REQMODE_SET_CONF | G_REQMODE_GET_CONF
| G_REQMODE_GET_DESC
| G_REQMODE_CLEAR_FEAT
, &regs->reqmode);
for (i = 0; i < 4; i++)
dev->ep[i].irqs = 0;
/* can't modify descriptors after writing UsbReady */
for (i = 0; i < DESC_LEN; i++)
writel(0, &regs->descriptors[i]);
writel(0, &regs->UsbReady);
/* expect ep0 requests when the host drops reset */
writel(PW_RESETB | PW_PULLUP, &regs->power_detect);
dev->int_enable = INT_DEVWIDE | INT_EP0;
writel(dev->int_enable, &dev->regs->int_enable);
readl(&regs->int_enable);
dev->gadget.speed = USB_SPEED_FULL;
dev->ep0state = EP0_IDLE;
}
static void udc_enable(struct goku_udc *dev)
{
/* start enumeration now, or after power detect irq */
if (readl(&dev->regs->power_detect) & PW_DETECT)
ep0_start(dev);
else {
DBG(dev, "%s\n", __FUNCTION__);
dev->int_enable = INT_PWRDETECT;
writel(dev->int_enable, &dev->regs->int_enable);
}
}
/*-------------------------------------------------------------------------*/
/* keeping it simple:
* - one bus driver, initted first;
* - one function driver, initted second
*/
static struct goku_udc *the_controller;
/* when a driver is successfully registered, it will receive
* control requests including set_configuration(), which enables
* non-control requests. then usb traffic follows until a
* disconnect is reported. then a host may connect again, or
* the driver might get unbound.
*/
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
{
struct goku_udc *dev = the_controller;
int retval;
if (!driver
|| driver->speed != USB_SPEED_FULL
|| !driver->bind
|| !driver->unbind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
if (!dev)
return -ENODEV;
if (dev->driver)
return -EBUSY;
/* hook up the driver */
driver->driver.bus = NULL;
dev->driver = driver;
dev->gadget.dev.driver = &driver->driver;
retval = driver->bind(&dev->gadget);
if (retval) {
DBG(dev, "bind to driver %s --> error %d\n",
driver->driver.name, retval);
dev->driver = NULL;
dev->gadget.dev.driver = NULL;
return retval;
}
/* then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
udc_enable(dev);
DBG(dev, "registered gadget driver '%s'\n", driver->driver.name);
return 0;
}
EXPORT_SYMBOL(usb_gadget_register_driver);
static void
stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver)
{
unsigned i;
DBG (dev, "%s\n", __FUNCTION__);
if (dev->gadget.speed == USB_SPEED_UNKNOWN)
driver = NULL;
/* disconnect gadget driver after quiesceing hw and the driver */
udc_reset (dev);
for (i = 0; i < 4; i++)
nuke(&dev->ep [i], -ESHUTDOWN);
if (driver) {
spin_unlock(&dev->lock);
driver->disconnect(&dev->gadget);
spin_lock(&dev->lock);
}
if (dev->driver)
udc_enable(dev);
}
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
struct goku_udc *dev = the_controller;
unsigned long flags;
if (!dev)
return -ENODEV;
if (!driver || driver != dev->driver)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
dev->driver = NULL;
stop_activity(dev, driver);
spin_unlock_irqrestore(&dev->lock, flags);
driver->unbind(&dev->gadget);
DBG(dev, "unregistered driver '%s'\n", driver->driver.name);
return 0;
}
EXPORT_SYMBOL(usb_gadget_unregister_driver);
/*-------------------------------------------------------------------------*/
static void ep0_setup(struct goku_udc *dev)
{
struct goku_udc_regs __iomem *regs = dev->regs;
struct usb_ctrlrequest ctrl;
int tmp;
/* read SETUP packet and enter DATA stage */
ctrl.bRequestType = readl(&regs->bRequestType);
ctrl.bRequest = readl(&regs->bRequest);
ctrl.wValue = (readl(&regs->wValueH) << 8) | readl(&regs->wValueL);
ctrl.wIndex = (readl(&regs->wIndexH) << 8) | readl(&regs->wIndexL);
ctrl.wLength = (readl(&regs->wLengthH) << 8) | readl(&regs->wLengthL);
writel(0, &regs->SetupRecv);
nuke(&dev->ep[0], 0);
dev->ep[0].stopped = 0;
if (likely(ctrl.bRequestType & USB_DIR_IN)) {
dev->ep[0].is_in = 1;
dev->ep0state = EP0_IN;
/* detect early status stages */
writel(ICONTROL_STATUSNAK, &dev->regs->IntControl);
} else {
dev->ep[0].is_in = 0;
dev->ep0state = EP0_OUT;
/* NOTE: CLEAR_FEATURE is done in software so that we can
* synchronize transfer restarts after bulk IN stalls. data
* won't even enter the fifo until the halt is cleared.
*/
switch (ctrl.bRequest) {
case USB_REQ_CLEAR_FEATURE:
switch (ctrl.bRequestType) {
case USB_RECIP_ENDPOINT:
tmp = ctrl.wIndex & 0x0f;
/* active endpoint */
if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0))
goto stall;
if (ctrl.wIndex & USB_DIR_IN) {
if (!dev->ep[tmp].is_in)
goto stall;
} else {
if (dev->ep[tmp].is_in)
goto stall;
}
if (ctrl.wValue != USB_ENDPOINT_HALT)
goto stall;
if (tmp)
goku_clear_halt(&dev->ep[tmp]);
succeed:
/* start ep0out status stage */
writel(~(1<<0), &regs->EOP);
dev->ep[0].stopped = 1;
dev->ep0state = EP0_STATUS;
return;
case USB_RECIP_DEVICE:
/* device remote wakeup: always clear */
if (ctrl.wValue != 1)
goto stall;
VDBG(dev, "clear dev remote wakeup\n");
goto succeed;
case USB_RECIP_INTERFACE:
goto stall;
default: /* pass to gadget driver */
break;
}
break;
default:
break;
}
}
#ifdef USB_TRACE
VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
ctrl.bRequestType, ctrl.bRequest,
ctrl.wValue, ctrl.wIndex, ctrl.wLength);
#endif
/* hw wants to know when we're configured (or not) */
dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION
&& ctrl.bRequestType == USB_RECIP_DEVICE);
if (unlikely(dev->req_config))
dev->configured = (ctrl.wValue != 0);
/* delegate everything to the gadget driver.
* it may respond after this irq handler returns.
*/
spin_unlock (&dev->lock);
tmp = dev->driver->setup(&dev->gadget, &ctrl);
spin_lock (&dev->lock);
if (unlikely(tmp < 0)) {
stall:
#ifdef USB_TRACE
VDBG(dev, "req %02x.%02x protocol STALL; err %d\n",
ctrl.bRequestType, ctrl.bRequest, tmp);
#endif
command(regs, COMMAND_STALL, 0);
dev->ep[0].stopped = 1;
dev->ep0state = EP0_STALL;
}
/* expect at least one data or status stage irq */
}
#define ACK(irqbit) { \
stat &= ~irqbit; \
writel(~irqbit, &regs->int_status); \
handled = 1; \
}
static irqreturn_t goku_irq(int irq, void *_dev, struct pt_regs *r)
{
struct goku_udc *dev = _dev;
struct goku_udc_regs __iomem *regs = dev->regs;
struct goku_ep *ep;
u32 stat, handled = 0;
unsigned i, rescans = 5;
spin_lock(&dev->lock);
rescan:
stat = readl(&regs->int_status) & dev->int_enable;
if (!stat)
goto done;
dev->irqs++;
/* device-wide irqs */
if (unlikely(stat & INT_DEVWIDE)) {
if (stat & INT_SYSERROR) {
ERROR(dev, "system error\n");
stop_activity(dev, dev->driver);
stat = 0;
handled = 1;
// FIXME have a neater way to prevent re-enumeration
dev->driver = NULL;
goto done;
}
if (stat & INT_PWRDETECT) {
writel(~stat, &regs->int_status);
if (readl(&dev->regs->power_detect) & PW_DETECT) {
VDBG(dev, "connect\n");
ep0_start(dev);
} else {
DBG(dev, "disconnect\n");
if (dev->gadget.speed == USB_SPEED_FULL)
stop_activity(dev, dev->driver);
dev->ep0state = EP0_DISCONNECT;
dev->int_enable = INT_DEVWIDE;
writel(dev->int_enable, &dev->regs->int_enable);
}
stat = 0;
handled = 1;
goto done;
}
if (stat & INT_SUSPEND) {
ACK(INT_SUSPEND);
if (readl(&regs->ep_status[0]) & EPxSTATUS_SUSPEND) {
switch (dev->ep0state) {
case EP0_DISCONNECT:
case EP0_SUSPEND:
goto pm_next;
default:
break;
}
DBG(dev, "USB suspend\n");
dev->ep0state = EP0_SUSPEND;
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->suspend) {
spin_unlock(&dev->lock);
dev->driver->suspend(&dev->gadget);
spin_lock(&dev->lock);
}
} else {
if (dev->ep0state != EP0_SUSPEND) {
DBG(dev, "bogus USB resume %d\n",
dev->ep0state);
goto pm_next;
}
DBG(dev, "USB resume\n");
dev->ep0state = EP0_IDLE;
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->resume) {
spin_unlock(&dev->lock);
dev->driver->resume(&dev->gadget);
spin_lock(&dev->lock);
}
}
}
pm_next:
if (stat & INT_USBRESET) { /* hub reset done */
ACK(INT_USBRESET);
INFO(dev, "USB reset done, gadget %s\n",
dev->driver->driver.name);
}
// and INT_ERR on some endpoint's crc/bitstuff/... problem
}
/* progress ep0 setup, data, or status stages.
* no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs
*/
if (stat & INT_SETUP) {
ACK(INT_SETUP);
dev->ep[0].irqs++;
ep0_setup(dev);
}
if (stat & INT_STATUSNAK) {
ACK(INT_STATUSNAK|INT_ENDPOINT0);
if (dev->ep0state == EP0_IN) {
ep = &dev->ep[0];
ep->irqs++;
nuke(ep, 0);
writel(~(1<<0), &regs->EOP);
dev->ep0state = EP0_STATUS;
}
}
if (stat & INT_ENDPOINT0) {
ACK(INT_ENDPOINT0);
ep = &dev->ep[0];
ep->irqs++;
pio_advance(ep);
}
/* dma completion */
if (stat & INT_MSTRDEND) { /* IN */
ACK(INT_MSTRDEND);
ep = &dev->ep[UDC_MSTRD_ENDPOINT];
ep->irqs++;
dma_advance(dev, ep);
}
if (stat & INT_MSTWREND) { /* OUT */
ACK(INT_MSTWREND);
ep = &dev->ep[UDC_MSTWR_ENDPOINT];
ep->irqs++;
dma_advance(dev, ep);
}
if (stat & INT_MSTWRTMOUT) { /* OUT */
ACK(INT_MSTWRTMOUT);
ep = &dev->ep[UDC_MSTWR_ENDPOINT];
ep->irqs++;
ERROR(dev, "%s write timeout ?\n", ep->ep.name);
// reset dma? then dma_advance()
}
/* pio */
for (i = 1; i < 4; i++) {
u32 tmp = INT_EPxDATASET(i);
if (!(stat & tmp))
continue;
ep = &dev->ep[i];
pio_advance(ep);
if (list_empty (&ep->queue))
pio_irq_disable(dev, regs, i);
stat &= ~tmp;
handled = 1;
ep->irqs++;
}
if (rescans--)
goto rescan;
done:
(void)readl(&regs->int_enable);
spin_unlock(&dev->lock);
if (stat)
DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat,
readl(&regs->int_status), dev->int_enable);
return IRQ_RETVAL(handled);
}
#undef ACK
/*-------------------------------------------------------------------------*/
static void gadget_release(struct device *_dev)
{
struct goku_udc *dev = dev_get_drvdata(_dev);
kfree(dev);
}
/* tear down the binding between this driver and the pci device */
static void goku_remove(struct pci_dev *pdev)
{
struct goku_udc *dev = pci_get_drvdata(pdev);
DBG(dev, "%s\n", __FUNCTION__);
/* start with the driver above us */
if (dev->driver) {
/* should have been done already by driver model core */
WARN(dev, "pci remove, driver '%s' is still registered\n",
dev->driver->driver.name);
usb_gadget_unregister_driver(dev->driver);
}
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
remove_proc_entry(proc_node_name, NULL);
#endif
if (dev->regs)
udc_reset(dev);
if (dev->got_irq)
free_irq(pdev->irq, dev);
if (dev->regs)
iounmap(dev->regs);
if (dev->got_region)
release_mem_region(pci_resource_start (pdev, 0),
pci_resource_len (pdev, 0));
if (dev->enabled)
pci_disable_device(pdev);
device_unregister(&dev->gadget.dev);
pci_set_drvdata(pdev, NULL);
dev->regs = NULL;
the_controller = NULL;
INFO(dev, "unbind\n");
}
/* wrap this driver around the specified pci device, but
* don't respond over USB until a gadget driver binds to us.
*/
static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct goku_udc *dev = NULL;
unsigned long resource, len;
void __iomem *base = NULL;
int retval;
char buf [8], *bufp;
/* if you want to support more than one controller in a system,
* usb_gadget_driver_{register,unregister}() must change.
*/
if (the_controller) {
WARN(dev, "ignoring %s\n", pci_name(pdev));
return -EBUSY;
}
if (!pdev->irq) {
printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
retval = -ENODEV;
goto done;
}
/* alloc, and start init */
dev = kmalloc (sizeof *dev, SLAB_KERNEL);
if (dev == NULL){
pr_debug("enomem %s\n", pci_name(pdev));
retval = -ENOMEM;
goto done;
}
memset(dev, 0, sizeof *dev);
spin_lock_init(&dev->lock);
dev->pdev = pdev;
dev->gadget.ops = &goku_ops;
/* the "gadget" abstracts/virtualizes the controller */
strcpy(dev->gadget.dev.bus_id, "gadget");
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
dev->gadget.dev.release = gadget_release;
dev->gadget.name = driver_name;
/* now all the pci goodies ... */
retval = pci_enable_device(pdev);
if (retval < 0) {
DBG(dev, "can't enable, %d\n", retval);
goto done;
}
dev->enabled = 1;
resource = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
if (!request_mem_region(resource, len, driver_name)) {
DBG(dev, "controller already in use\n");
retval = -EBUSY;
goto done;
}
dev->got_region = 1;
base = ioremap_nocache(resource, len);
if (base == NULL) {
DBG(dev, "can't map memory\n");
retval = -EFAULT;
goto done;
}
dev->regs = (struct goku_udc_regs __iomem *) base;
pci_set_drvdata(pdev, dev);
INFO(dev, "%s\n", driver_desc);
INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
#ifndef __sparc__
scnprintf(buf, sizeof buf, "%d", pdev->irq);
bufp = buf;
#else
bufp = __irq_itoa(pdev->irq);
#endif
INFO(dev, "irq %s, pci mem %p\n", bufp, base);
/* init to known state, then setup irqs */
udc_reset(dev);
udc_reinit (dev);
if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/,
driver_name, dev) != 0) {
DBG(dev, "request interrupt %s failed\n", bufp);
retval = -EBUSY;
goto done;
}
dev->got_irq = 1;
if (use_dma)
pci_set_master(pdev);
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev);
#endif
/* done */
the_controller = dev;
device_register(&dev->gadget.dev);
return 0;
done:
if (dev)
goku_remove (pdev);
return retval;
}
/*-------------------------------------------------------------------------*/
static struct pci_device_id pci_ids [] = { {
.class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
.class_mask = ~0,
.vendor = 0x102f, /* Toshiba */
.device = 0x0107, /* this UDC */
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);
static struct pci_driver goku_pci_driver = {
.name = (char *) driver_name,
.id_table = pci_ids,
.probe = goku_probe,
.remove = goku_remove,
/* FIXME add power management support */
};
static int __init init (void)
{
return pci_register_driver (&goku_pci_driver);
}
module_init (init);
static void __exit cleanup (void)
{
pci_unregister_driver (&goku_pci_driver);
}
module_exit (cleanup);
Reference in New Issue View Git Blame Copy Permalink