51c997d80e
Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the same as the Fintek F71805F/FG as far as hardware monitoring is concerned, with two additional internal voltages monitored (VSB and battery), and 6 VID inputs (not yet supported.) To make things a bit more confusing, two of the voltage input pins (in4 and in8) can be used for other functions. The driver reads the pin configuration from the Super-I/O configuration space to decide whether it must create interface files for these inputs or not. Many thanks to Nikolay Derkach for testing the early iterations of this code and reporting bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
561 lines
17 KiB
Plaintext
561 lines
17 KiB
Plaintext
#
|
|
# Hardware monitoring chip drivers configuration
|
|
#
|
|
|
|
menu "Hardware Monitoring support"
|
|
|
|
config HWMON
|
|
tristate "Hardware Monitoring support"
|
|
default y
|
|
help
|
|
Hardware monitoring devices let you monitor the hardware health
|
|
of a system. Most modern motherboards include such a device. It
|
|
can include temperature sensors, voltage sensors, fan speed
|
|
sensors and various additional features such as the ability to
|
|
control the speed of the fans. If you want this support you
|
|
should say Y here and also to the specific driver(s) for your
|
|
sensors chip(s) below.
|
|
|
|
To find out which specific driver(s) you need, use the
|
|
sensors-detect script from the lm_sensors package. Read
|
|
<file:Documentation/hwmon/userspace-tools> for details.
|
|
|
|
This support can also be built as a module. If so, the module
|
|
will be called hwmon.
|
|
|
|
config HWMON_VID
|
|
tristate
|
|
default n
|
|
|
|
config SENSORS_ABITUGURU
|
|
tristate "Abit uGuru"
|
|
depends on HWMON && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Abit uGuru chips
|
|
sensor part. The voltage and frequency control parts of the Abit
|
|
uGuru are not supported. The Abit uGuru chip can be found on Abit
|
|
uGuru featuring motherboards (most modern Abit motherboards).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru.
|
|
|
|
config SENSORS_ADM1021
|
|
tristate "Analog Devices ADM1021 and compatibles"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1021
|
|
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
|
|
Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
|
|
and the XEON processor built-in sensor.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1021.
|
|
|
|
config SENSORS_ADM1025
|
|
tristate "Analog Devices ADM1025 and compatibles"
|
|
depends on HWMON && I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1025
|
|
and Philips NE1619 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1025.
|
|
|
|
config SENSORS_ADM1026
|
|
tristate "Analog Devices ADM1026 and compatibles"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1026
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1026.
|
|
|
|
config SENSORS_ADM1031
|
|
tristate "Analog Devices ADM1031 and compatibles"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1031
|
|
and ADM1030 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1031.
|
|
|
|
config SENSORS_ADM9240
|
|
tristate "Analog Devices ADM9240 and compatibles"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM9240,
|
|
Dallas DS1780, National Semiconductor LM81 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm9240.
|
|
|
|
config SENSORS_K8TEMP
|
|
tristate "AMD Athlon64/FX or Opteron temperature sensor"
|
|
depends on HWMON && X86 && PCI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor(s) inside your CPU. Supported is whole AMD K8
|
|
microarchitecture. Please note that you will need at least
|
|
lm-sensors 2.10.1 for proper userspace support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called k8temp.
|
|
|
|
config SENSORS_ASB100
|
|
tristate "Asus ASB100 Bach"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the ASB100 Bach sensor
|
|
chip found on some Asus mainboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asb100.
|
|
|
|
config SENSORS_ATXP1
|
|
tristate "Attansic ATXP1 VID controller"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Attansic ATXP1 VID
|
|
controller.
|
|
|
|
If your board have such a chip, you are able to control your CPU
|
|
core and other voltages.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called atxp1.
|
|
|
|
config SENSORS_DS1621
|
|
tristate "Dallas Semiconductor DS1621 and DS1625"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for Dallas Semiconductor
|
|
DS1621 and DS1625 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ds1621.
|
|
|
|
config SENSORS_F71805F
|
|
tristate "Fintek F71805F/FG and F71872F/FG"
|
|
depends on HWMON && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F71805F/FG and F71872F/FG Super-I/O
|
|
chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71805f.
|
|
|
|
config SENSORS_FSCHER
|
|
tristate "FSC Hermes"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for Fujitsu Siemens
|
|
Computers Hermes sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fscher.
|
|
|
|
config SENSORS_FSCPOS
|
|
tristate "FSC Poseidon"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for Fujitsu Siemens
|
|
Computers Poseidon sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fscpos.
|
|
|
|
config SENSORS_GL518SM
|
|
tristate "Genesys Logic GL518SM"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL518SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl518sm.
|
|
|
|
config SENSORS_GL520SM
|
|
tristate "Genesys Logic GL520SM"
|
|
depends on HWMON && I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL520SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl520sm.
|
|
|
|
config SENSORS_IT87
|
|
tristate "ITE IT87xx and compatibles"
|
|
depends on HWMON && I2C
|
|
select I2C_ISA
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for ITE IT8705F, IT8712F,
|
|
IT8716F and IT8718F sensor chips, and the SiS960 clone.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called it87.
|
|
|
|
config SENSORS_LM63
|
|
tristate "National Semiconductor LM63"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
LM63 remote diode digital temperature sensor with integrated fan
|
|
control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
|
|
motherboard, among others.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm63.
|
|
|
|
config SENSORS_LM70
|
|
tristate "National Semiconductor LM70"
|
|
depends on HWMON && SPI_MASTER && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
LM70 digital temperature sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm70.
|
|
|
|
config SENSORS_LM75
|
|
tristate "National Semiconductor LM75 and compatibles"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM75
|
|
sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
|
|
9-bit precision mode), and TelCom (now Microchip) TCN75.
|
|
|
|
The DS75 and DS1775 in 10- to 12-bit precision modes will require
|
|
a force module parameter. The driver will not handle the extra
|
|
precision anyhow.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm75.
|
|
|
|
config SENSORS_LM77
|
|
tristate "National Semiconductor LM77"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM77
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm77.
|
|
|
|
config SENSORS_LM78
|
|
tristate "National Semiconductor LM78 and compatibles"
|
|
depends on HWMON && I2C
|
|
select I2C_ISA
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM78,
|
|
LM78-J and LM79.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm78.
|
|
|
|
config SENSORS_LM80
|
|
tristate "National Semiconductor LM80"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM80 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm80.
|
|
|
|
config SENSORS_LM83
|
|
tristate "National Semiconductor LM83 and compatibles"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM82 and LM83 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm83.
|
|
|
|
config SENSORS_LM85
|
|
tristate "National Semiconductor LM85 and compatibles"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM85
|
|
sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm85.
|
|
|
|
config SENSORS_LM87
|
|
tristate "National Semiconductor LM87"
|
|
depends on HWMON && I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM87
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm87.
|
|
|
|
config SENSORS_LM90
|
|
tristate "National Semiconductor LM90 and compatibles"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM90,
|
|
LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
|
|
MAX6658 sensor chips.
|
|
|
|
The Analog Devices ADT7461 sensor chip is also supported, but only
|
|
if found in ADM1032 compatibility mode.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm90.
|
|
|
|
config SENSORS_LM92
|
|
tristate "National Semiconductor LM92 and compatibles"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM92
|
|
and Maxim MAX6635 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm92.
|
|
|
|
config SENSORS_MAX1619
|
|
tristate "Maxim MAX1619 sensor chip"
|
|
depends on HWMON && I2C
|
|
help
|
|
If you say yes here you get support for MAX1619 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1619.
|
|
|
|
config SENSORS_PC87360
|
|
tristate "National Semiconductor PC87360 family"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select I2C_ISA
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC8736x Super-I/O chips.
|
|
The PC87360, PC87363 and PC87364 only have fan monitoring and
|
|
control. The PC87365 and PC87366 additionally have voltage and
|
|
temperature monitoring.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87360.
|
|
|
|
config SENSORS_PC87427
|
|
tristate "National Semiconductor PC87427"
|
|
depends on HWMON && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC87427 Super-I/O chip.
|
|
The chip has two distinct logical devices, one for fan speed
|
|
monitoring and control, and one for voltage and temperature
|
|
monitoring. Only fan speed monitoring is supported right now.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87427.
|
|
|
|
config SENSORS_SIS5595
|
|
tristate "Silicon Integrated Systems Corp. SiS5595"
|
|
depends on HWMON && I2C && PCI && EXPERIMENTAL
|
|
select I2C_ISA
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
SiS5595 South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sis5595.
|
|
|
|
config SENSORS_SMSC47M1
|
|
tristate "SMSC LPC47M10x and compatibles"
|
|
depends on HWMON && I2C
|
|
select I2C_ISA
|
|
help
|
|
If you say yes here you get support for the integrated fan
|
|
monitoring and control capabilities of the SMSC LPC47B27x,
|
|
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
|
|
LPC47M192 and LPC47M997 chips.
|
|
|
|
The temperature and voltage sensor features of the LPC47M192
|
|
and LPC47M997 are supported by another driver, select also
|
|
"SMSC LPC47M192 and compatibles" below for those.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m1.
|
|
|
|
config SENSORS_SMSC47M192
|
|
tristate "SMSC LPC47M192 and compatibles"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
voltage sensors of the SMSC LPC47M192 and LPC47M997 chips.
|
|
|
|
The fan monitoring and control capabilities of these chips
|
|
are supported by another driver, select
|
|
"SMSC LPC47M10x and compatibles" above. You need both drivers
|
|
if you want fan control and voltage/temperature sensor support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m192.
|
|
|
|
config SENSORS_SMSC47B397
|
|
tristate "SMSC LPC47B397-NC"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select I2C_ISA
|
|
help
|
|
If you say yes here you get support for the SMSC LPC47B397-NC
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47b397.
|
|
|
|
config SENSORS_VIA686A
|
|
tristate "VIA686A"
|
|
depends on HWMON && I2C && PCI
|
|
select I2C_ISA
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
Via 686A/B South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called via686a.
|
|
|
|
config SENSORS_VT1211
|
|
tristate "VIA VT1211"
|
|
depends on HWMON && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for hardware monitoring
|
|
features of the VIA VT1211 Super-I/O chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt1211.
|
|
|
|
config SENSORS_VT8231
|
|
tristate "VIA VT8231"
|
|
depends on HWMON && I2C && PCI && EXPERIMENTAL
|
|
select HWMON_VID
|
|
select I2C_ISA
|
|
help
|
|
If you say yes here then you get support for the integrated sensors
|
|
in the VIA VT8231 device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt8231.
|
|
|
|
config SENSORS_W83781D
|
|
tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
|
|
depends on HWMON && I2C
|
|
select I2C_ISA
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W8378x series
|
|
of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
|
|
and the similar Asus AS99127F.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83781d.
|
|
|
|
config SENSORS_W83791D
|
|
tristate "Winbond W83791D"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83791D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83791d.
|
|
|
|
config SENSORS_W83792D
|
|
tristate "Winbond W83792D"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Winbond W83792D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83792d.
|
|
|
|
config SENSORS_W83L785TS
|
|
tristate "Winbond W83L785TS-S"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Winbond W83L785TS-S
|
|
sensor chip, which is used on the Asus A7N8X, among other
|
|
motherboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l785ts.
|
|
|
|
config SENSORS_W83627HF
|
|
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
|
|
depends on HWMON && I2C
|
|
select I2C_ISA
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W836X7 series
|
|
of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
|
|
W83697HF.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627hf.
|
|
|
|
config SENSORS_W83627EHF
|
|
tristate "Winbond W83627EHF"
|
|
depends on HWMON && I2C && EXPERIMENTAL
|
|
select I2C_ISA
|
|
help
|
|
If you say yes here you get preliminary support for the hardware
|
|
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
|
|
Only fan and temperature inputs are supported at the moment, while
|
|
the chip does much more than that.
|
|
|
|
This driver also supports the W83627EHG, which is the lead-free
|
|
version of the W83627EHF.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627ehf.
|
|
|
|
config SENSORS_HDAPS
|
|
tristate "IBM Hard Drive Active Protection System (hdaps)"
|
|
depends on HWMON && INPUT && X86
|
|
default n
|
|
help
|
|
This driver provides support for the IBM Hard Drive Active Protection
|
|
System (hdaps), which provides an accelerometer and other misc. data.
|
|
ThinkPads starting with the R50, T41, and X40 are supported. The
|
|
accelerometer data is readable via sysfs.
|
|
|
|
This driver also provides an absolute input class device, allowing
|
|
the laptop to act as a pinball machine-esque joystick.
|
|
|
|
If your ThinkPad is not recognized by the driver, please update to latest
|
|
BIOS. This is especially the case for some R52 ThinkPads.
|
|
|
|
Say Y here if you have an applicable laptop and want to experience
|
|
the awesome power of hdaps.
|
|
|
|
config HWMON_DEBUG_CHIP
|
|
bool "Hardware Monitoring Chip debugging messages"
|
|
depends on HWMON
|
|
default n
|
|
help
|
|
Say Y here if you want the I2C chip drivers to produce a bunch of
|
|
debug messages to the system log. Select this if you are having
|
|
a problem with I2C support and want to see more of what is going
|
|
on.
|
|
|
|
endmenu
|