81b34fbecb
In preparation for multi-OMAP2 kernels, split mach-omap2/clock2xxx_data.c into mach-omap2/clock2420_data.c and mach-omap2/clock2430_data.c. 2430 uses a different device space physical memory layout than past or future OMAPs, and we use a different virtual memory layout as well, which causes trouble for architecture-level code/data that tries to support both. We tried using offsets from the virtual base last year, but those patches never made it upstream; so after some discussion with Tony about the best all-around approach, we'll just grit our teeth and duplicate the structures. The maintenance advantages of a single kernel config that can compile and boot on OMAP2, 3, and 4 platforms are simply too compelling. This approach does have some nice benefits beyond multi-OMAP 2 kernel support. The runtime size of OMAP2420-specific and OMAP2430-specific kernels is smaller, since unused clocks for the other OMAP2 chip will no longer be compiled in. (At some point we will mark the clock data __initdata and allocate it during registration, which will eliminate the runtime memory advantage.) It also makes the clock trees slightly easier to read, since 2420-specific and 2430-specific clocks are no longer mixed together. This patch also splits 2430-specific clock code into its own file, mach-omap2/clock2430.c, which is only compiled in for 2430 builds - mostly for organizational clarity. While here, fix a bug in the OMAP2430 clock tree: "emul_ck" was incorrectly marked as being 2420-only, when actually it is present on both OMAP2420 and OMAP2430. Thanks to Tony for some good discussions about how to approach this problem. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
123 lines
2.6 KiB
C
123 lines
2.6 KiB
C
/*
|
|
* OMAP2xxx APLL clock control functions
|
|
*
|
|
* Copyright (C) 2005-2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2004-2010 Nokia Corporation
|
|
*
|
|
* Contacts:
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Paul Walmsley
|
|
*
|
|
* Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
|
|
* Gordon McNutt and RidgeRun, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <plat/clock.h>
|
|
#include <plat/prcm.h>
|
|
|
|
#include "clock.h"
|
|
#include "clock2xxx.h"
|
|
#include "cm.h"
|
|
#include "cm-regbits-24xx.h"
|
|
|
|
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
|
|
#define EN_APLL_STOPPED 0
|
|
#define EN_APLL_LOCKED 3
|
|
|
|
/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
|
|
#define APLLS_CLKIN_19_2MHZ 0
|
|
#define APLLS_CLKIN_13MHZ 2
|
|
#define APLLS_CLKIN_12MHZ 3
|
|
|
|
void __iomem *cm_idlest_pll;
|
|
|
|
/* Private functions */
|
|
|
|
/* Enable an APLL if off */
|
|
static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
|
|
{
|
|
u32 cval, apll_mask;
|
|
|
|
apll_mask = EN_APLL_LOCKED << clk->enable_bit;
|
|
|
|
cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
|
|
|
|
if ((cval & apll_mask) == apll_mask)
|
|
return 0; /* apll already enabled */
|
|
|
|
cval &= ~apll_mask;
|
|
cval |= apll_mask;
|
|
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
|
|
|
|
omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
|
|
OMAP24XX_CM_IDLEST_VAL, clk->name);
|
|
|
|
/*
|
|
* REVISIT: Should we return an error code if omap2_wait_clock_ready()
|
|
* fails?
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static int omap2_clk_apll96_enable(struct clk *clk)
|
|
{
|
|
return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
|
|
}
|
|
|
|
static int omap2_clk_apll54_enable(struct clk *clk)
|
|
{
|
|
return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
|
|
}
|
|
|
|
/* Stop APLL */
|
|
static void omap2_clk_apll_disable(struct clk *clk)
|
|
{
|
|
u32 cval;
|
|
|
|
cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
|
|
cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
|
|
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
|
|
}
|
|
|
|
/* Public data */
|
|
|
|
const struct clkops clkops_apll96 = {
|
|
.enable = omap2_clk_apll96_enable,
|
|
.disable = omap2_clk_apll_disable,
|
|
};
|
|
|
|
const struct clkops clkops_apll54 = {
|
|
.enable = omap2_clk_apll54_enable,
|
|
.disable = omap2_clk_apll_disable,
|
|
};
|
|
|
|
/* Public functions */
|
|
|
|
u32 omap2xxx_get_apll_clkin(void)
|
|
{
|
|
u32 aplls, srate = 0;
|
|
|
|
aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
|
|
aplls &= OMAP24XX_APLLS_CLKIN_MASK;
|
|
aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
|
|
|
|
if (aplls == APLLS_CLKIN_19_2MHZ)
|
|
srate = 19200000;
|
|
else if (aplls == APLLS_CLKIN_13MHZ)
|
|
srate = 13000000;
|
|
else if (aplls == APLLS_CLKIN_12MHZ)
|
|
srate = 12000000;
|
|
|
|
return srate;
|
|
}
|
|
|