384912ed19
The Ethernet framing is used for a lot of devices these days. Most prominent are WiFi and WiMAX based devices. However for userspace application it is important to classify these devices correctly and not only see them as Ethernet devices. The daemons like HAL, DeviceKit or even NetworkManager with udev support tries to do the classification in userspace with a lot trickery and extra system calls. This is not good and actually reaches its limitations. Especially since the kernel does know the type of the Ethernet device it is pretty stupid. To solve this problem the underlying device type needs to be set and then the value will be exported as DEVTYPE via uevents and available within udev. # cat /sys/class/net/wlan0/uevent DEVTYPE=wlan INTERFACE=wlan0 IFINDEX=5 This is similar to subsystems like USB and SCSI that distinguish between hosts, devices, disks, partitions etc. The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual device type. All device types are free form, but for convenience the same strings as used with RFKILL are choosen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
3358 lines
85 KiB
C
3358 lines
85 KiB
C
/******************************************************************************
|
|
*
|
|
* Driver for Option High Speed Mobile Devices.
|
|
*
|
|
* Copyright (C) 2008 Option International
|
|
* Filip Aben <f.aben@option.com>
|
|
* Denis Joseph Barrow <d.barow@option.com>
|
|
* Jan Dumon <j.dumon@option.com>
|
|
* Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
|
|
* <ajb@spheresystems.co.uk>
|
|
* Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
|
|
* Copyright (C) 2008 Novell, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
|
|
* USA
|
|
*
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/******************************************************************************
|
|
*
|
|
* Description of the device:
|
|
*
|
|
* Interface 0: Contains the IP network interface on the bulk end points.
|
|
* The multiplexed serial ports are using the interrupt and
|
|
* control endpoints.
|
|
* Interrupt contains a bitmap telling which multiplexed
|
|
* serialport needs servicing.
|
|
*
|
|
* Interface 1: Diagnostics port, uses bulk only, do not submit urbs until the
|
|
* port is opened, as this have a huge impact on the network port
|
|
* throughput.
|
|
*
|
|
* Interface 2: Standard modem interface - circuit switched interface, this
|
|
* can be used to make a standard ppp connection however it
|
|
* should not be used in conjunction with the IP network interface
|
|
* enabled for USB performance reasons i.e. if using this set
|
|
* ideally disable_net=1.
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_driver.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/rfkill.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/usb/cdc.h>
|
|
#include <net/arp.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
|
|
|
|
#define DRIVER_VERSION "1.2"
|
|
#define MOD_AUTHOR "Option Wireless"
|
|
#define MOD_DESCRIPTION "USB High Speed Option driver"
|
|
#define MOD_LICENSE "GPL"
|
|
|
|
#define HSO_MAX_NET_DEVICES 10
|
|
#define HSO__MAX_MTU 2048
|
|
#define DEFAULT_MTU 1500
|
|
#define DEFAULT_MRU 1500
|
|
|
|
#define CTRL_URB_RX_SIZE 1024
|
|
#define CTRL_URB_TX_SIZE 64
|
|
|
|
#define BULK_URB_RX_SIZE 4096
|
|
#define BULK_URB_TX_SIZE 8192
|
|
|
|
#define MUX_BULK_RX_BUF_SIZE HSO__MAX_MTU
|
|
#define MUX_BULK_TX_BUF_SIZE HSO__MAX_MTU
|
|
#define MUX_BULK_RX_BUF_COUNT 4
|
|
#define USB_TYPE_OPTION_VENDOR 0x20
|
|
|
|
/* These definitions are used with the struct hso_net flags element */
|
|
/* - use *_bit operations on it. (bit indices not values.) */
|
|
#define HSO_NET_RUNNING 0
|
|
|
|
#define HSO_NET_TX_TIMEOUT (HZ*10)
|
|
|
|
#define HSO_SERIAL_MAGIC 0x48534f31
|
|
|
|
/* Number of ttys to handle */
|
|
#define HSO_SERIAL_TTY_MINORS 256
|
|
|
|
#define MAX_RX_URBS 2
|
|
|
|
static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
|
|
{
|
|
if (tty)
|
|
return tty->driver_data;
|
|
return NULL;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* Debugging functions */
|
|
/*****************************************************************************/
|
|
#define D__(lvl_, fmt, arg...) \
|
|
do { \
|
|
printk(lvl_ "[%d:%s]: " fmt "\n", \
|
|
__LINE__, __func__, ## arg); \
|
|
} while (0)
|
|
|
|
#define D_(lvl, args...) \
|
|
do { \
|
|
if (lvl & debug) \
|
|
D__(KERN_INFO, args); \
|
|
} while (0)
|
|
|
|
#define D1(args...) D_(0x01, ##args)
|
|
#define D2(args...) D_(0x02, ##args)
|
|
#define D3(args...) D_(0x04, ##args)
|
|
#define D4(args...) D_(0x08, ##args)
|
|
#define D5(args...) D_(0x10, ##args)
|
|
|
|
/*****************************************************************************/
|
|
/* Enumerators */
|
|
/*****************************************************************************/
|
|
enum pkt_parse_state {
|
|
WAIT_IP,
|
|
WAIT_DATA,
|
|
WAIT_SYNC
|
|
};
|
|
|
|
/*****************************************************************************/
|
|
/* Structs */
|
|
/*****************************************************************************/
|
|
|
|
struct hso_shared_int {
|
|
struct usb_endpoint_descriptor *intr_endp;
|
|
void *shared_intr_buf;
|
|
struct urb *shared_intr_urb;
|
|
struct usb_device *usb;
|
|
int use_count;
|
|
int ref_count;
|
|
struct mutex shared_int_lock;
|
|
};
|
|
|
|
struct hso_net {
|
|
struct hso_device *parent;
|
|
struct net_device *net;
|
|
struct rfkill *rfkill;
|
|
|
|
struct usb_endpoint_descriptor *in_endp;
|
|
struct usb_endpoint_descriptor *out_endp;
|
|
|
|
struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
|
|
struct urb *mux_bulk_tx_urb;
|
|
void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
|
|
void *mux_bulk_tx_buf;
|
|
|
|
struct sk_buff *skb_rx_buf;
|
|
struct sk_buff *skb_tx_buf;
|
|
|
|
enum pkt_parse_state rx_parse_state;
|
|
spinlock_t net_lock;
|
|
|
|
unsigned short rx_buf_size;
|
|
unsigned short rx_buf_missing;
|
|
struct iphdr rx_ip_hdr;
|
|
|
|
unsigned long flags;
|
|
};
|
|
|
|
enum rx_ctrl_state{
|
|
RX_IDLE,
|
|
RX_SENT,
|
|
RX_PENDING
|
|
};
|
|
|
|
#define BM_REQUEST_TYPE (0xa1)
|
|
#define B_NOTIFICATION (0x20)
|
|
#define W_VALUE (0x0)
|
|
#define W_INDEX (0x2)
|
|
#define W_LENGTH (0x2)
|
|
|
|
#define B_OVERRUN (0x1<<6)
|
|
#define B_PARITY (0x1<<5)
|
|
#define B_FRAMING (0x1<<4)
|
|
#define B_RING_SIGNAL (0x1<<3)
|
|
#define B_BREAK (0x1<<2)
|
|
#define B_TX_CARRIER (0x1<<1)
|
|
#define B_RX_CARRIER (0x1<<0)
|
|
|
|
struct hso_serial_state_notification {
|
|
u8 bmRequestType;
|
|
u8 bNotification;
|
|
u16 wValue;
|
|
u16 wIndex;
|
|
u16 wLength;
|
|
u16 UART_state_bitmap;
|
|
} __attribute__((packed));
|
|
|
|
struct hso_tiocmget {
|
|
struct mutex mutex;
|
|
wait_queue_head_t waitq;
|
|
int intr_completed;
|
|
struct usb_endpoint_descriptor *endp;
|
|
struct urb *urb;
|
|
struct hso_serial_state_notification serial_state_notification;
|
|
u16 prev_UART_state_bitmap;
|
|
struct uart_icount icount;
|
|
};
|
|
|
|
|
|
struct hso_serial {
|
|
struct hso_device *parent;
|
|
int magic;
|
|
u8 minor;
|
|
|
|
struct hso_shared_int *shared_int;
|
|
|
|
/* rx/tx urb could be either a bulk urb or a control urb depending
|
|
on which serial port it is used on. */
|
|
struct urb *rx_urb[MAX_RX_URBS];
|
|
u8 num_rx_urbs;
|
|
u8 *rx_data[MAX_RX_URBS];
|
|
u16 rx_data_length; /* should contain allocated length */
|
|
|
|
struct urb *tx_urb;
|
|
u8 *tx_data;
|
|
u8 *tx_buffer;
|
|
u16 tx_data_length; /* should contain allocated length */
|
|
u16 tx_data_count;
|
|
u16 tx_buffer_count;
|
|
struct usb_ctrlrequest ctrl_req_tx;
|
|
struct usb_ctrlrequest ctrl_req_rx;
|
|
|
|
struct usb_endpoint_descriptor *in_endp;
|
|
struct usb_endpoint_descriptor *out_endp;
|
|
|
|
enum rx_ctrl_state rx_state;
|
|
u8 rts_state;
|
|
u8 dtr_state;
|
|
unsigned tx_urb_used:1;
|
|
|
|
/* from usb_serial_port */
|
|
struct tty_struct *tty;
|
|
int open_count;
|
|
spinlock_t serial_lock;
|
|
|
|
int (*write_data) (struct hso_serial *serial);
|
|
struct hso_tiocmget *tiocmget;
|
|
/* Hacks required to get flow control
|
|
* working on the serial receive buffers
|
|
* so as not to drop characters on the floor.
|
|
*/
|
|
int curr_rx_urb_idx;
|
|
u16 curr_rx_urb_offset;
|
|
u8 rx_urb_filled[MAX_RX_URBS];
|
|
struct tasklet_struct unthrottle_tasklet;
|
|
struct work_struct retry_unthrottle_workqueue;
|
|
};
|
|
|
|
struct hso_device {
|
|
union {
|
|
struct hso_serial *dev_serial;
|
|
struct hso_net *dev_net;
|
|
} port_data;
|
|
|
|
u32 port_spec;
|
|
|
|
u8 is_active;
|
|
u8 usb_gone;
|
|
struct work_struct async_get_intf;
|
|
struct work_struct async_put_intf;
|
|
|
|
struct usb_device *usb;
|
|
struct usb_interface *interface;
|
|
|
|
struct device *dev;
|
|
struct kref ref;
|
|
struct mutex mutex;
|
|
};
|
|
|
|
/* Type of interface */
|
|
#define HSO_INTF_MASK 0xFF00
|
|
#define HSO_INTF_MUX 0x0100
|
|
#define HSO_INTF_BULK 0x0200
|
|
|
|
/* Type of port */
|
|
#define HSO_PORT_MASK 0xFF
|
|
#define HSO_PORT_NO_PORT 0x0
|
|
#define HSO_PORT_CONTROL 0x1
|
|
#define HSO_PORT_APP 0x2
|
|
#define HSO_PORT_GPS 0x3
|
|
#define HSO_PORT_PCSC 0x4
|
|
#define HSO_PORT_APP2 0x5
|
|
#define HSO_PORT_GPS_CONTROL 0x6
|
|
#define HSO_PORT_MSD 0x7
|
|
#define HSO_PORT_VOICE 0x8
|
|
#define HSO_PORT_DIAG2 0x9
|
|
#define HSO_PORT_DIAG 0x10
|
|
#define HSO_PORT_MODEM 0x11
|
|
#define HSO_PORT_NETWORK 0x12
|
|
|
|
/* Additional device info */
|
|
#define HSO_INFO_MASK 0xFF000000
|
|
#define HSO_INFO_CRC_BUG 0x01000000
|
|
|
|
/*****************************************************************************/
|
|
/* Prototypes */
|
|
/*****************************************************************************/
|
|
/* Serial driver functions */
|
|
static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear);
|
|
static void ctrl_callback(struct urb *urb);
|
|
static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
|
|
static void hso_kick_transmit(struct hso_serial *serial);
|
|
/* Helper functions */
|
|
static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
|
|
struct usb_device *usb, gfp_t gfp);
|
|
static void log_usb_status(int status, const char *function);
|
|
static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
|
|
int type, int dir);
|
|
static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
|
|
static void hso_free_interface(struct usb_interface *intf);
|
|
static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
|
|
static int hso_stop_serial_device(struct hso_device *hso_dev);
|
|
static int hso_start_net_device(struct hso_device *hso_dev);
|
|
static void hso_free_shared_int(struct hso_shared_int *shared_int);
|
|
static int hso_stop_net_device(struct hso_device *hso_dev);
|
|
static void hso_serial_ref_free(struct kref *ref);
|
|
static void hso_std_serial_read_bulk_callback(struct urb *urb);
|
|
static int hso_mux_serial_read(struct hso_serial *serial);
|
|
static void async_get_intf(struct work_struct *data);
|
|
static void async_put_intf(struct work_struct *data);
|
|
static int hso_put_activity(struct hso_device *hso_dev);
|
|
static int hso_get_activity(struct hso_device *hso_dev);
|
|
static void tiocmget_intr_callback(struct urb *urb);
|
|
/*****************************************************************************/
|
|
/* Helping functions */
|
|
/*****************************************************************************/
|
|
|
|
/* #define DEBUG */
|
|
|
|
static inline struct hso_net *dev2net(struct hso_device *hso_dev)
|
|
{
|
|
return hso_dev->port_data.dev_net;
|
|
}
|
|
|
|
static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
|
|
{
|
|
return hso_dev->port_data.dev_serial;
|
|
}
|
|
|
|
/* Debugging functions */
|
|
#ifdef DEBUG
|
|
static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
|
|
unsigned int len)
|
|
{
|
|
static char name[255];
|
|
|
|
sprintf(name, "hso[%d:%s]", line_count, func_name);
|
|
print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
|
|
}
|
|
|
|
#define DUMP(buf_, len_) \
|
|
dbg_dump(__LINE__, __func__, buf_, len_)
|
|
|
|
#define DUMP1(buf_, len_) \
|
|
do { \
|
|
if (0x01 & debug) \
|
|
DUMP(buf_, len_); \
|
|
} while (0)
|
|
#else
|
|
#define DUMP(buf_, len_)
|
|
#define DUMP1(buf_, len_)
|
|
#endif
|
|
|
|
/* module parameters */
|
|
static int debug;
|
|
static int tty_major;
|
|
static int disable_net;
|
|
|
|
/* driver info */
|
|
static const char driver_name[] = "hso";
|
|
static const char tty_filename[] = "ttyHS";
|
|
static const char *version = __FILE__ ": " DRIVER_VERSION " " MOD_AUTHOR;
|
|
/* the usb driver itself (registered in hso_init) */
|
|
static struct usb_driver hso_driver;
|
|
/* serial structures */
|
|
static struct tty_driver *tty_drv;
|
|
static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
|
|
static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
|
|
static spinlock_t serial_table_lock;
|
|
|
|
static const s32 default_port_spec[] = {
|
|
HSO_INTF_MUX | HSO_PORT_NETWORK,
|
|
HSO_INTF_BULK | HSO_PORT_DIAG,
|
|
HSO_INTF_BULK | HSO_PORT_MODEM,
|
|
0
|
|
};
|
|
|
|
static const s32 icon321_port_spec[] = {
|
|
HSO_INTF_MUX | HSO_PORT_NETWORK,
|
|
HSO_INTF_BULK | HSO_PORT_DIAG2,
|
|
HSO_INTF_BULK | HSO_PORT_MODEM,
|
|
HSO_INTF_BULK | HSO_PORT_DIAG,
|
|
0
|
|
};
|
|
|
|
#define default_port_device(vendor, product) \
|
|
USB_DEVICE(vendor, product), \
|
|
.driver_info = (kernel_ulong_t)default_port_spec
|
|
|
|
#define icon321_port_device(vendor, product) \
|
|
USB_DEVICE(vendor, product), \
|
|
.driver_info = (kernel_ulong_t)icon321_port_spec
|
|
|
|
/* list of devices we support */
|
|
static const struct usb_device_id hso_ids[] = {
|
|
{default_port_device(0x0af0, 0x6711)},
|
|
{default_port_device(0x0af0, 0x6731)},
|
|
{default_port_device(0x0af0, 0x6751)},
|
|
{default_port_device(0x0af0, 0x6771)},
|
|
{default_port_device(0x0af0, 0x6791)},
|
|
{default_port_device(0x0af0, 0x6811)},
|
|
{default_port_device(0x0af0, 0x6911)},
|
|
{default_port_device(0x0af0, 0x6951)},
|
|
{default_port_device(0x0af0, 0x6971)},
|
|
{default_port_device(0x0af0, 0x7011)},
|
|
{default_port_device(0x0af0, 0x7031)},
|
|
{default_port_device(0x0af0, 0x7051)},
|
|
{default_port_device(0x0af0, 0x7071)},
|
|
{default_port_device(0x0af0, 0x7111)},
|
|
{default_port_device(0x0af0, 0x7211)},
|
|
{default_port_device(0x0af0, 0x7251)},
|
|
{default_port_device(0x0af0, 0x7271)},
|
|
{default_port_device(0x0af0, 0x7311)},
|
|
{default_port_device(0x0af0, 0xc031)}, /* Icon-Edge */
|
|
{icon321_port_device(0x0af0, 0xd013)}, /* Module HSxPA */
|
|
{icon321_port_device(0x0af0, 0xd031)}, /* Icon-321 */
|
|
{icon321_port_device(0x0af0, 0xd033)}, /* Icon-322 */
|
|
{USB_DEVICE(0x0af0, 0x7301)}, /* GE40x */
|
|
{USB_DEVICE(0x0af0, 0x7361)}, /* GE40x */
|
|
{USB_DEVICE(0x0af0, 0x7381)}, /* GE40x */
|
|
{USB_DEVICE(0x0af0, 0x7401)}, /* GI 0401 */
|
|
{USB_DEVICE(0x0af0, 0x7501)}, /* GTM 382 */
|
|
{USB_DEVICE(0x0af0, 0x7601)}, /* GE40x */
|
|
{USB_DEVICE(0x0af0, 0x7701)},
|
|
{USB_DEVICE(0x0af0, 0x7801)},
|
|
{USB_DEVICE(0x0af0, 0x7901)},
|
|
{USB_DEVICE(0x0af0, 0x8200)},
|
|
{USB_DEVICE(0x0af0, 0x8201)},
|
|
{USB_DEVICE(0x0af0, 0xd035)},
|
|
{USB_DEVICE(0x0af0, 0xd055)},
|
|
{USB_DEVICE(0x0af0, 0xd155)},
|
|
{USB_DEVICE(0x0af0, 0xd255)},
|
|
{USB_DEVICE(0x0af0, 0xd057)},
|
|
{USB_DEVICE(0x0af0, 0xd157)},
|
|
{USB_DEVICE(0x0af0, 0xd257)},
|
|
{USB_DEVICE(0x0af0, 0xd357)},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, hso_ids);
|
|
|
|
/* Sysfs attribute */
|
|
static ssize_t hso_sysfs_show_porttype(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct hso_device *hso_dev = dev_get_drvdata(dev);
|
|
char *port_name;
|
|
|
|
if (!hso_dev)
|
|
return 0;
|
|
|
|
switch (hso_dev->port_spec & HSO_PORT_MASK) {
|
|
case HSO_PORT_CONTROL:
|
|
port_name = "Control";
|
|
break;
|
|
case HSO_PORT_APP:
|
|
port_name = "Application";
|
|
break;
|
|
case HSO_PORT_APP2:
|
|
port_name = "Application2";
|
|
break;
|
|
case HSO_PORT_GPS:
|
|
port_name = "GPS";
|
|
break;
|
|
case HSO_PORT_GPS_CONTROL:
|
|
port_name = "GPS Control";
|
|
break;
|
|
case HSO_PORT_PCSC:
|
|
port_name = "PCSC";
|
|
break;
|
|
case HSO_PORT_DIAG:
|
|
port_name = "Diagnostic";
|
|
break;
|
|
case HSO_PORT_DIAG2:
|
|
port_name = "Diagnostic2";
|
|
break;
|
|
case HSO_PORT_MODEM:
|
|
port_name = "Modem";
|
|
break;
|
|
case HSO_PORT_NETWORK:
|
|
port_name = "Network";
|
|
break;
|
|
default:
|
|
port_name = "Unknown";
|
|
break;
|
|
}
|
|
|
|
return sprintf(buf, "%s\n", port_name);
|
|
}
|
|
static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
|
|
|
|
static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
|
|
{
|
|
int idx;
|
|
|
|
for (idx = 0; idx < serial->num_rx_urbs; idx++)
|
|
if (serial->rx_urb[idx] == urb)
|
|
return idx;
|
|
dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
|
|
return -1;
|
|
}
|
|
|
|
/* converts mux value to a port spec value */
|
|
static u32 hso_mux_to_port(int mux)
|
|
{
|
|
u32 result;
|
|
|
|
switch (mux) {
|
|
case 0x1:
|
|
result = HSO_PORT_CONTROL;
|
|
break;
|
|
case 0x2:
|
|
result = HSO_PORT_APP;
|
|
break;
|
|
case 0x4:
|
|
result = HSO_PORT_PCSC;
|
|
break;
|
|
case 0x8:
|
|
result = HSO_PORT_GPS;
|
|
break;
|
|
case 0x10:
|
|
result = HSO_PORT_APP2;
|
|
break;
|
|
default:
|
|
result = HSO_PORT_NO_PORT;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/* converts port spec value to a mux value */
|
|
static u32 hso_port_to_mux(int port)
|
|
{
|
|
u32 result;
|
|
|
|
switch (port & HSO_PORT_MASK) {
|
|
case HSO_PORT_CONTROL:
|
|
result = 0x0;
|
|
break;
|
|
case HSO_PORT_APP:
|
|
result = 0x1;
|
|
break;
|
|
case HSO_PORT_PCSC:
|
|
result = 0x2;
|
|
break;
|
|
case HSO_PORT_GPS:
|
|
result = 0x3;
|
|
break;
|
|
case HSO_PORT_APP2:
|
|
result = 0x4;
|
|
break;
|
|
default:
|
|
result = 0x0;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
static struct hso_serial *get_serial_by_shared_int_and_type(
|
|
struct hso_shared_int *shared_int,
|
|
int mux)
|
|
{
|
|
int i, port;
|
|
|
|
port = hso_mux_to_port(mux);
|
|
|
|
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
|
|
if (serial_table[i]
|
|
&& (dev2ser(serial_table[i])->shared_int == shared_int)
|
|
&& ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
|
|
return dev2ser(serial_table[i]);
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct hso_serial *get_serial_by_index(unsigned index)
|
|
{
|
|
struct hso_serial *serial = NULL;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&serial_table_lock, flags);
|
|
if (serial_table[index])
|
|
serial = dev2ser(serial_table[index]);
|
|
spin_unlock_irqrestore(&serial_table_lock, flags);
|
|
|
|
return serial;
|
|
}
|
|
|
|
static int get_free_serial_index(void)
|
|
{
|
|
int index;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&serial_table_lock, flags);
|
|
for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
|
|
if (serial_table[index] == NULL) {
|
|
spin_unlock_irqrestore(&serial_table_lock, flags);
|
|
return index;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&serial_table_lock, flags);
|
|
|
|
printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
static void set_serial_by_index(unsigned index, struct hso_serial *serial)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&serial_table_lock, flags);
|
|
if (serial)
|
|
serial_table[index] = serial->parent;
|
|
else
|
|
serial_table[index] = NULL;
|
|
spin_unlock_irqrestore(&serial_table_lock, flags);
|
|
}
|
|
|
|
/* log a meaningful explanation of an USB status */
|
|
static void log_usb_status(int status, const char *function)
|
|
{
|
|
char *explanation;
|
|
|
|
switch (status) {
|
|
case -ENODEV:
|
|
explanation = "no device";
|
|
break;
|
|
case -ENOENT:
|
|
explanation = "endpoint not enabled";
|
|
break;
|
|
case -EPIPE:
|
|
explanation = "endpoint stalled";
|
|
break;
|
|
case -ENOSPC:
|
|
explanation = "not enough bandwidth";
|
|
break;
|
|
case -ESHUTDOWN:
|
|
explanation = "device disabled";
|
|
break;
|
|
case -EHOSTUNREACH:
|
|
explanation = "device suspended";
|
|
break;
|
|
case -EINVAL:
|
|
case -EAGAIN:
|
|
case -EFBIG:
|
|
case -EMSGSIZE:
|
|
explanation = "internal error";
|
|
break;
|
|
default:
|
|
explanation = "unknown status";
|
|
break;
|
|
}
|
|
D1("%s: received USB status - %s (%d)", function, explanation, status);
|
|
}
|
|
|
|
/* Network interface functions */
|
|
|
|
/* called when net interface is brought up by ifconfig */
|
|
static int hso_net_open(struct net_device *net)
|
|
{
|
|
struct hso_net *odev = netdev_priv(net);
|
|
unsigned long flags = 0;
|
|
|
|
if (!odev) {
|
|
dev_err(&net->dev, "No net device !\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
odev->skb_tx_buf = NULL;
|
|
|
|
/* setup environment */
|
|
spin_lock_irqsave(&odev->net_lock, flags);
|
|
odev->rx_parse_state = WAIT_IP;
|
|
odev->rx_buf_size = 0;
|
|
odev->rx_buf_missing = sizeof(struct iphdr);
|
|
spin_unlock_irqrestore(&odev->net_lock, flags);
|
|
|
|
/* We are up and running. */
|
|
set_bit(HSO_NET_RUNNING, &odev->flags);
|
|
hso_start_net_device(odev->parent);
|
|
|
|
/* Tell the kernel we are ready to start receiving from it */
|
|
netif_start_queue(net);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called when interface is brought down by ifconfig */
|
|
static int hso_net_close(struct net_device *net)
|
|
{
|
|
struct hso_net *odev = netdev_priv(net);
|
|
|
|
/* we don't need the queue anymore */
|
|
netif_stop_queue(net);
|
|
/* no longer running */
|
|
clear_bit(HSO_NET_RUNNING, &odev->flags);
|
|
|
|
hso_stop_net_device(odev->parent);
|
|
|
|
/* done */
|
|
return 0;
|
|
}
|
|
|
|
/* USB tells is xmit done, we should start the netqueue again */
|
|
static void write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct hso_net *odev = urb->context;
|
|
int status = urb->status;
|
|
|
|
/* Sanity check */
|
|
if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
|
|
dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
|
|
return;
|
|
}
|
|
|
|
/* Do we still have a valid kernel network device? */
|
|
if (!netif_device_present(odev->net)) {
|
|
dev_err(&urb->dev->dev, "%s: net device not present\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
/* log status, but don't act on it, we don't need to resubmit anything
|
|
* anyhow */
|
|
if (status)
|
|
log_usb_status(status, __func__);
|
|
|
|
hso_put_activity(odev->parent);
|
|
|
|
/* Tell the network interface we are ready for another frame */
|
|
netif_wake_queue(odev->net);
|
|
}
|
|
|
|
/* called by kernel when we need to transmit a packet */
|
|
static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
|
|
struct net_device *net)
|
|
{
|
|
struct hso_net *odev = netdev_priv(net);
|
|
int result;
|
|
|
|
/* Tell the kernel, "No more frames 'til we are done with this one." */
|
|
netif_stop_queue(net);
|
|
if (hso_get_activity(odev->parent) == -EAGAIN) {
|
|
odev->skb_tx_buf = skb;
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* log if asked */
|
|
DUMP1(skb->data, skb->len);
|
|
/* Copy it from kernel memory to OUR memory */
|
|
memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
|
|
D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
|
|
|
|
/* Fill in the URB for shipping it out. */
|
|
usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
|
|
odev->parent->usb,
|
|
usb_sndbulkpipe(odev->parent->usb,
|
|
odev->out_endp->
|
|
bEndpointAddress & 0x7F),
|
|
odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
|
|
odev);
|
|
|
|
/* Deal with the Zero Length packet problem, I hope */
|
|
odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
|
|
|
|
/* Send the URB on its merry way. */
|
|
result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
|
|
if (result) {
|
|
dev_warn(&odev->parent->interface->dev,
|
|
"failed mux_bulk_tx_urb %d", result);
|
|
net->stats.tx_errors++;
|
|
netif_start_queue(net);
|
|
} else {
|
|
net->stats.tx_packets++;
|
|
net->stats.tx_bytes += skb->len;
|
|
/* And tell the kernel when the last transmit started. */
|
|
net->trans_start = jiffies;
|
|
}
|
|
dev_kfree_skb(skb);
|
|
/* we're done */
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void hso_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
|
|
{
|
|
struct hso_net *odev = netdev_priv(net);
|
|
|
|
strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
|
|
strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
|
|
usb_make_path(odev->parent->usb, info->bus_info, sizeof info->bus_info);
|
|
}
|
|
|
|
static const struct ethtool_ops ops = {
|
|
.get_drvinfo = hso_get_drvinfo,
|
|
.get_link = ethtool_op_get_link
|
|
};
|
|
|
|
/* called when a packet did not ack after watchdogtimeout */
|
|
static void hso_net_tx_timeout(struct net_device *net)
|
|
{
|
|
struct hso_net *odev = netdev_priv(net);
|
|
|
|
if (!odev)
|
|
return;
|
|
|
|
/* Tell syslog we are hosed. */
|
|
dev_warn(&net->dev, "Tx timed out.\n");
|
|
|
|
/* Tear the waiting frame off the list */
|
|
if (odev->mux_bulk_tx_urb
|
|
&& (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
|
|
usb_unlink_urb(odev->mux_bulk_tx_urb);
|
|
|
|
/* Update statistics */
|
|
net->stats.tx_errors++;
|
|
}
|
|
|
|
/* make a real packet from the received USB buffer */
|
|
static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
|
|
unsigned int count, unsigned char is_eop)
|
|
{
|
|
unsigned short temp_bytes;
|
|
unsigned short buffer_offset = 0;
|
|
unsigned short frame_len;
|
|
unsigned char *tmp_rx_buf;
|
|
|
|
/* log if needed */
|
|
D1("Rx %d bytes", count);
|
|
DUMP(ip_pkt, min(128, (int)count));
|
|
|
|
while (count) {
|
|
switch (odev->rx_parse_state) {
|
|
case WAIT_IP:
|
|
/* waiting for IP header. */
|
|
/* wanted bytes - size of ip header */
|
|
temp_bytes =
|
|
(count <
|
|
odev->rx_buf_missing) ? count : odev->
|
|
rx_buf_missing;
|
|
|
|
memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
|
|
odev->rx_buf_size, ip_pkt + buffer_offset,
|
|
temp_bytes);
|
|
|
|
odev->rx_buf_size += temp_bytes;
|
|
buffer_offset += temp_bytes;
|
|
odev->rx_buf_missing -= temp_bytes;
|
|
count -= temp_bytes;
|
|
|
|
if (!odev->rx_buf_missing) {
|
|
/* header is complete allocate an sk_buffer and
|
|
* continue to WAIT_DATA */
|
|
frame_len = ntohs(odev->rx_ip_hdr.tot_len);
|
|
|
|
if ((frame_len > DEFAULT_MRU) ||
|
|
(frame_len < sizeof(struct iphdr))) {
|
|
dev_err(&odev->net->dev,
|
|
"Invalid frame (%d) length\n",
|
|
frame_len);
|
|
odev->rx_parse_state = WAIT_SYNC;
|
|
continue;
|
|
}
|
|
/* Allocate an sk_buff */
|
|
odev->skb_rx_buf = netdev_alloc_skb(odev->net,
|
|
frame_len);
|
|
if (!odev->skb_rx_buf) {
|
|
/* We got no receive buffer. */
|
|
D1("could not allocate memory");
|
|
odev->rx_parse_state = WAIT_SYNC;
|
|
return;
|
|
}
|
|
|
|
/* Copy what we got so far. make room for iphdr
|
|
* after tail. */
|
|
tmp_rx_buf =
|
|
skb_put(odev->skb_rx_buf,
|
|
sizeof(struct iphdr));
|
|
memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
|
|
sizeof(struct iphdr));
|
|
|
|
/* ETH_HLEN */
|
|
odev->rx_buf_size = sizeof(struct iphdr);
|
|
|
|
/* Filip actually use .tot_len */
|
|
odev->rx_buf_missing =
|
|
frame_len - sizeof(struct iphdr);
|
|
odev->rx_parse_state = WAIT_DATA;
|
|
}
|
|
break;
|
|
|
|
case WAIT_DATA:
|
|
temp_bytes = (count < odev->rx_buf_missing)
|
|
? count : odev->rx_buf_missing;
|
|
|
|
/* Copy the rest of the bytes that are left in the
|
|
* buffer into the waiting sk_buf. */
|
|
/* Make room for temp_bytes after tail. */
|
|
tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
|
|
memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
|
|
|
|
odev->rx_buf_missing -= temp_bytes;
|
|
count -= temp_bytes;
|
|
buffer_offset += temp_bytes;
|
|
odev->rx_buf_size += temp_bytes;
|
|
if (!odev->rx_buf_missing) {
|
|
/* Packet is complete. Inject into stack. */
|
|
/* We have IP packet here */
|
|
odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
|
|
/* don't check it */
|
|
odev->skb_rx_buf->ip_summed =
|
|
CHECKSUM_UNNECESSARY;
|
|
|
|
skb_reset_mac_header(odev->skb_rx_buf);
|
|
|
|
/* Ship it off to the kernel */
|
|
netif_rx(odev->skb_rx_buf);
|
|
/* No longer our buffer. */
|
|
odev->skb_rx_buf = NULL;
|
|
|
|
/* update out statistics */
|
|
odev->net->stats.rx_packets++;
|
|
|
|
odev->net->stats.rx_bytes += odev->rx_buf_size;
|
|
|
|
odev->rx_buf_size = 0;
|
|
odev->rx_buf_missing = sizeof(struct iphdr);
|
|
odev->rx_parse_state = WAIT_IP;
|
|
}
|
|
break;
|
|
|
|
case WAIT_SYNC:
|
|
D1(" W_S");
|
|
count = 0;
|
|
break;
|
|
default:
|
|
D1(" ");
|
|
count--;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Recovery mechanism for WAIT_SYNC state. */
|
|
if (is_eop) {
|
|
if (odev->rx_parse_state == WAIT_SYNC) {
|
|
odev->rx_parse_state = WAIT_IP;
|
|
odev->rx_buf_size = 0;
|
|
odev->rx_buf_missing = sizeof(struct iphdr);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Moving data from usb to kernel (in interrupt state) */
|
|
static void read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct hso_net *odev = urb->context;
|
|
struct net_device *net;
|
|
int result;
|
|
int status = urb->status;
|
|
|
|
/* is al ok? (Filip: Who's Al ?) */
|
|
if (status) {
|
|
log_usb_status(status, __func__);
|
|
return;
|
|
}
|
|
|
|
/* Sanity check */
|
|
if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
|
|
D1("BULK IN callback but driver is not active!");
|
|
return;
|
|
}
|
|
usb_mark_last_busy(urb->dev);
|
|
|
|
net = odev->net;
|
|
|
|
if (!netif_device_present(net)) {
|
|
/* Somebody killed our network interface... */
|
|
return;
|
|
}
|
|
|
|
if (odev->parent->port_spec & HSO_INFO_CRC_BUG) {
|
|
u32 rest;
|
|
u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
|
|
rest = urb->actual_length % odev->in_endp->wMaxPacketSize;
|
|
if (((rest == 5) || (rest == 6))
|
|
&& !memcmp(((u8 *) urb->transfer_buffer) +
|
|
urb->actual_length - 4, crc_check, 4)) {
|
|
urb->actual_length -= 4;
|
|
}
|
|
}
|
|
|
|
/* do we even have a packet? */
|
|
if (urb->actual_length) {
|
|
/* Handle the IP stream, add header and push it onto network
|
|
* stack if the packet is complete. */
|
|
spin_lock(&odev->net_lock);
|
|
packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
|
|
(urb->transfer_buffer_length >
|
|
urb->actual_length) ? 1 : 0);
|
|
spin_unlock(&odev->net_lock);
|
|
}
|
|
|
|
/* We are done with this URB, resubmit it. Prep the USB to wait for
|
|
* another frame. Reuse same as received. */
|
|
usb_fill_bulk_urb(urb,
|
|
odev->parent->usb,
|
|
usb_rcvbulkpipe(odev->parent->usb,
|
|
odev->in_endp->
|
|
bEndpointAddress & 0x7F),
|
|
urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
|
|
read_bulk_callback, odev);
|
|
|
|
/* Give this to the USB subsystem so it can tell us when more data
|
|
* arrives. */
|
|
result = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (result)
|
|
dev_warn(&odev->parent->interface->dev,
|
|
"%s failed submit mux_bulk_rx_urb %d", __func__,
|
|
result);
|
|
}
|
|
|
|
/* Serial driver functions */
|
|
|
|
static void hso_init_termios(struct ktermios *termios)
|
|
{
|
|
/*
|
|
* The default requirements for this device are:
|
|
*/
|
|
termios->c_iflag &=
|
|
~(IGNBRK /* disable ignore break */
|
|
| BRKINT /* disable break causes interrupt */
|
|
| PARMRK /* disable mark parity errors */
|
|
| ISTRIP /* disable clear high bit of input characters */
|
|
| INLCR /* disable translate NL to CR */
|
|
| IGNCR /* disable ignore CR */
|
|
| ICRNL /* disable translate CR to NL */
|
|
| IXON); /* disable enable XON/XOFF flow control */
|
|
|
|
/* disable postprocess output characters */
|
|
termios->c_oflag &= ~OPOST;
|
|
|
|
termios->c_lflag &=
|
|
~(ECHO /* disable echo input characters */
|
|
| ECHONL /* disable echo new line */
|
|
| ICANON /* disable erase, kill, werase, and rprnt
|
|
special characters */
|
|
| ISIG /* disable interrupt, quit, and suspend special
|
|
characters */
|
|
| IEXTEN); /* disable non-POSIX special characters */
|
|
|
|
termios->c_cflag &=
|
|
~(CSIZE /* no size */
|
|
| PARENB /* disable parity bit */
|
|
| CBAUD /* clear current baud rate */
|
|
| CBAUDEX); /* clear current buad rate */
|
|
|
|
termios->c_cflag |= CS8; /* character size 8 bits */
|
|
|
|
/* baud rate 115200 */
|
|
tty_termios_encode_baud_rate(termios, 115200, 115200);
|
|
}
|
|
|
|
static void _hso_serial_set_termios(struct tty_struct *tty,
|
|
struct ktermios *old)
|
|
{
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
struct ktermios *termios;
|
|
|
|
if (!serial) {
|
|
printk(KERN_ERR "%s: no tty structures", __func__);
|
|
return;
|
|
}
|
|
|
|
D4("port %d", serial->minor);
|
|
|
|
/*
|
|
* Fix up unsupported bits
|
|
*/
|
|
termios = tty->termios;
|
|
termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
|
|
|
|
termios->c_cflag &=
|
|
~(CSIZE /* no size */
|
|
| PARENB /* disable parity bit */
|
|
| CBAUD /* clear current baud rate */
|
|
| CBAUDEX); /* clear current buad rate */
|
|
|
|
termios->c_cflag |= CS8; /* character size 8 bits */
|
|
|
|
/* baud rate 115200 */
|
|
tty_encode_baud_rate(tty, 115200, 115200);
|
|
}
|
|
|
|
static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
|
|
{
|
|
int result;
|
|
#ifdef CONFIG_HSO_AUTOPM
|
|
usb_mark_last_busy(urb->dev);
|
|
#endif
|
|
/* We are done with this URB, resubmit it. Prep the USB to wait for
|
|
* another frame */
|
|
usb_fill_bulk_urb(urb, serial->parent->usb,
|
|
usb_rcvbulkpipe(serial->parent->usb,
|
|
serial->in_endp->
|
|
bEndpointAddress & 0x7F),
|
|
urb->transfer_buffer, serial->rx_data_length,
|
|
hso_std_serial_read_bulk_callback, serial);
|
|
/* Give this to the USB subsystem so it can tell us when more data
|
|
* arrives. */
|
|
result = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (result) {
|
|
dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
|
|
__func__, result);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
|
|
{
|
|
int count;
|
|
struct urb *curr_urb;
|
|
|
|
while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
|
|
curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
|
|
count = put_rxbuf_data(curr_urb, serial);
|
|
if (count == -1)
|
|
return;
|
|
if (count == 0) {
|
|
serial->curr_rx_urb_idx++;
|
|
if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
|
|
serial->curr_rx_urb_idx = 0;
|
|
hso_resubmit_rx_bulk_urb(serial, curr_urb);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
|
|
{
|
|
int count = 0;
|
|
struct urb *urb;
|
|
|
|
urb = serial->rx_urb[0];
|
|
if (serial->open_count > 0) {
|
|
count = put_rxbuf_data(urb, serial);
|
|
if (count == -1)
|
|
return;
|
|
}
|
|
/* Re issue a read as long as we receive data. */
|
|
|
|
if (count == 0 && ((urb->actual_length != 0) ||
|
|
(serial->rx_state == RX_PENDING))) {
|
|
serial->rx_state = RX_SENT;
|
|
hso_mux_serial_read(serial);
|
|
} else
|
|
serial->rx_state = RX_IDLE;
|
|
}
|
|
|
|
|
|
/* read callback for Diag and CS port */
|
|
static void hso_std_serial_read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct hso_serial *serial = urb->context;
|
|
int status = urb->status;
|
|
|
|
/* sanity check */
|
|
if (!serial) {
|
|
D1("serial == NULL");
|
|
return;
|
|
} else if (status) {
|
|
log_usb_status(status, __func__);
|
|
return;
|
|
}
|
|
|
|
D4("\n--- Got serial_read_bulk callback %02x ---", status);
|
|
D1("Actual length = %d\n", urb->actual_length);
|
|
DUMP1(urb->transfer_buffer, urb->actual_length);
|
|
|
|
/* Anyone listening? */
|
|
if (serial->open_count == 0)
|
|
return;
|
|
|
|
if (status == 0) {
|
|
if (serial->parent->port_spec & HSO_INFO_CRC_BUG) {
|
|
u32 rest;
|
|
u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
|
|
rest =
|
|
urb->actual_length %
|
|
serial->in_endp->wMaxPacketSize;
|
|
if (((rest == 5) || (rest == 6))
|
|
&& !memcmp(((u8 *) urb->transfer_buffer) +
|
|
urb->actual_length - 4, crc_check, 4)) {
|
|
urb->actual_length -= 4;
|
|
}
|
|
}
|
|
/* Valid data, handle RX data */
|
|
spin_lock(&serial->serial_lock);
|
|
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
|
|
put_rxbuf_data_and_resubmit_bulk_urb(serial);
|
|
spin_unlock(&serial->serial_lock);
|
|
} else if (status == -ENOENT || status == -ECONNRESET) {
|
|
/* Unlinked - check for throttled port. */
|
|
D2("Port %d, successfully unlinked urb", serial->minor);
|
|
spin_lock(&serial->serial_lock);
|
|
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
|
|
hso_resubmit_rx_bulk_urb(serial, urb);
|
|
spin_unlock(&serial->serial_lock);
|
|
} else {
|
|
D2("Port %d, status = %d for read urb", serial->minor, status);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This needs to be a tasklet otherwise we will
|
|
* end up recursively calling this function.
|
|
*/
|
|
static void hso_unthrottle_tasklet(struct hso_serial *serial)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&serial->serial_lock, flags);
|
|
if ((serial->parent->port_spec & HSO_INTF_MUX))
|
|
put_rxbuf_data_and_resubmit_ctrl_urb(serial);
|
|
else
|
|
put_rxbuf_data_and_resubmit_bulk_urb(serial);
|
|
spin_unlock_irqrestore(&serial->serial_lock, flags);
|
|
}
|
|
|
|
static void hso_unthrottle(struct tty_struct *tty)
|
|
{
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
|
|
tasklet_hi_schedule(&serial->unthrottle_tasklet);
|
|
}
|
|
|
|
static void hso_unthrottle_workfunc(struct work_struct *work)
|
|
{
|
|
struct hso_serial *serial =
|
|
container_of(work, struct hso_serial,
|
|
retry_unthrottle_workqueue);
|
|
hso_unthrottle_tasklet(serial);
|
|
}
|
|
|
|
/* open the requested serial port */
|
|
static int hso_serial_open(struct tty_struct *tty, struct file *filp)
|
|
{
|
|
struct hso_serial *serial = get_serial_by_index(tty->index);
|
|
int result;
|
|
|
|
/* sanity check */
|
|
if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
|
|
WARN_ON(1);
|
|
tty->driver_data = NULL;
|
|
D1("Failed to open port");
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&serial->parent->mutex);
|
|
result = usb_autopm_get_interface(serial->parent->interface);
|
|
if (result < 0)
|
|
goto err_out;
|
|
|
|
D1("Opening %d", serial->minor);
|
|
kref_get(&serial->parent->ref);
|
|
|
|
/* setup */
|
|
spin_lock_irq(&serial->serial_lock);
|
|
tty->driver_data = serial;
|
|
tty_kref_put(serial->tty);
|
|
serial->tty = tty_kref_get(tty);
|
|
spin_unlock_irq(&serial->serial_lock);
|
|
|
|
/* check for port already opened, if not set the termios */
|
|
serial->open_count++;
|
|
if (serial->open_count == 1) {
|
|
tty->low_latency = 1;
|
|
serial->rx_state = RX_IDLE;
|
|
/* Force default termio settings */
|
|
_hso_serial_set_termios(tty, NULL);
|
|
tasklet_init(&serial->unthrottle_tasklet,
|
|
(void (*)(unsigned long))hso_unthrottle_tasklet,
|
|
(unsigned long)serial);
|
|
INIT_WORK(&serial->retry_unthrottle_workqueue,
|
|
hso_unthrottle_workfunc);
|
|
result = hso_start_serial_device(serial->parent, GFP_KERNEL);
|
|
if (result) {
|
|
hso_stop_serial_device(serial->parent);
|
|
serial->open_count--;
|
|
kref_put(&serial->parent->ref, hso_serial_ref_free);
|
|
}
|
|
} else {
|
|
D1("Port was already open");
|
|
}
|
|
|
|
usb_autopm_put_interface(serial->parent->interface);
|
|
|
|
/* done */
|
|
if (result)
|
|
hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0);
|
|
err_out:
|
|
mutex_unlock(&serial->parent->mutex);
|
|
return result;
|
|
}
|
|
|
|
/* close the requested serial port */
|
|
static void hso_serial_close(struct tty_struct *tty, struct file *filp)
|
|
{
|
|
struct hso_serial *serial = tty->driver_data;
|
|
u8 usb_gone;
|
|
|
|
D1("Closing serial port");
|
|
|
|
/* Open failed, no close cleanup required */
|
|
if (serial == NULL)
|
|
return;
|
|
|
|
mutex_lock(&serial->parent->mutex);
|
|
usb_gone = serial->parent->usb_gone;
|
|
|
|
if (!usb_gone)
|
|
usb_autopm_get_interface(serial->parent->interface);
|
|
|
|
/* reset the rts and dtr */
|
|
/* do the actual close */
|
|
serial->open_count--;
|
|
kref_put(&serial->parent->ref, hso_serial_ref_free);
|
|
if (serial->open_count <= 0) {
|
|
serial->open_count = 0;
|
|
spin_lock_irq(&serial->serial_lock);
|
|
if (serial->tty == tty) {
|
|
serial->tty->driver_data = NULL;
|
|
serial->tty = NULL;
|
|
tty_kref_put(tty);
|
|
}
|
|
spin_unlock_irq(&serial->serial_lock);
|
|
if (!usb_gone)
|
|
hso_stop_serial_device(serial->parent);
|
|
tasklet_kill(&serial->unthrottle_tasklet);
|
|
cancel_work_sync(&serial->retry_unthrottle_workqueue);
|
|
}
|
|
|
|
if (!usb_gone)
|
|
usb_autopm_put_interface(serial->parent->interface);
|
|
|
|
mutex_unlock(&serial->parent->mutex);
|
|
}
|
|
|
|
/* close the requested serial port */
|
|
static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
|
|
int count)
|
|
{
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
int space, tx_bytes;
|
|
unsigned long flags;
|
|
|
|
/* sanity check */
|
|
if (serial == NULL) {
|
|
printk(KERN_ERR "%s: serial is NULL\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
spin_lock_irqsave(&serial->serial_lock, flags);
|
|
|
|
space = serial->tx_data_length - serial->tx_buffer_count;
|
|
tx_bytes = (count < space) ? count : space;
|
|
|
|
if (!tx_bytes)
|
|
goto out;
|
|
|
|
memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
|
|
serial->tx_buffer_count += tx_bytes;
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&serial->serial_lock, flags);
|
|
|
|
hso_kick_transmit(serial);
|
|
/* done */
|
|
return tx_bytes;
|
|
}
|
|
|
|
/* how much room is there for writing */
|
|
static int hso_serial_write_room(struct tty_struct *tty)
|
|
{
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
int room;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&serial->serial_lock, flags);
|
|
room = serial->tx_data_length - serial->tx_buffer_count;
|
|
spin_unlock_irqrestore(&serial->serial_lock, flags);
|
|
|
|
/* return free room */
|
|
return room;
|
|
}
|
|
|
|
/* setup the term */
|
|
static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
|
|
{
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
unsigned long flags;
|
|
|
|
if (old)
|
|
D5("Termios called with: cflags new[%d] - old[%d]",
|
|
tty->termios->c_cflag, old->c_cflag);
|
|
|
|
/* the actual setup */
|
|
spin_lock_irqsave(&serial->serial_lock, flags);
|
|
if (serial->open_count)
|
|
_hso_serial_set_termios(tty, old);
|
|
else
|
|
tty->termios = old;
|
|
spin_unlock_irqrestore(&serial->serial_lock, flags);
|
|
|
|
/* done */
|
|
return;
|
|
}
|
|
|
|
/* how many characters in the buffer */
|
|
static int hso_serial_chars_in_buffer(struct tty_struct *tty)
|
|
{
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
int chars;
|
|
unsigned long flags;
|
|
|
|
/* sanity check */
|
|
if (serial == NULL)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&serial->serial_lock, flags);
|
|
chars = serial->tx_buffer_count;
|
|
spin_unlock_irqrestore(&serial->serial_lock, flags);
|
|
|
|
return chars;
|
|
}
|
|
static int tiocmget_submit_urb(struct hso_serial *serial,
|
|
struct hso_tiocmget *tiocmget,
|
|
struct usb_device *usb)
|
|
{
|
|
int result;
|
|
|
|
if (serial->parent->usb_gone)
|
|
return -ENODEV;
|
|
usb_fill_int_urb(tiocmget->urb, usb,
|
|
usb_rcvintpipe(usb,
|
|
tiocmget->endp->
|
|
bEndpointAddress & 0x7F),
|
|
&tiocmget->serial_state_notification,
|
|
sizeof(struct hso_serial_state_notification),
|
|
tiocmget_intr_callback, serial,
|
|
tiocmget->endp->bInterval);
|
|
result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
|
|
if (result) {
|
|
dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
|
|
result);
|
|
}
|
|
return result;
|
|
|
|
}
|
|
|
|
static void tiocmget_intr_callback(struct urb *urb)
|
|
{
|
|
struct hso_serial *serial = urb->context;
|
|
struct hso_tiocmget *tiocmget;
|
|
int status = urb->status;
|
|
u16 UART_state_bitmap, prev_UART_state_bitmap;
|
|
struct uart_icount *icount;
|
|
struct hso_serial_state_notification *serial_state_notification;
|
|
struct usb_device *usb;
|
|
|
|
/* Sanity checks */
|
|
if (!serial)
|
|
return;
|
|
if (status) {
|
|
log_usb_status(status, __func__);
|
|
return;
|
|
}
|
|
tiocmget = serial->tiocmget;
|
|
if (!tiocmget)
|
|
return;
|
|
usb = serial->parent->usb;
|
|
serial_state_notification = &tiocmget->serial_state_notification;
|
|
if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
|
|
serial_state_notification->bNotification != B_NOTIFICATION ||
|
|
le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
|
|
le16_to_cpu(serial_state_notification->wIndex) != W_INDEX ||
|
|
le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
|
|
dev_warn(&usb->dev,
|
|
"hso received invalid serial state notification\n");
|
|
DUMP(serial_state_notification,
|
|
sizeof(hso_serial_state_notifation))
|
|
} else {
|
|
|
|
UART_state_bitmap = le16_to_cpu(serial_state_notification->
|
|
UART_state_bitmap);
|
|
prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
|
|
icount = &tiocmget->icount;
|
|
spin_lock(&serial->serial_lock);
|
|
if ((UART_state_bitmap & B_OVERRUN) !=
|
|
(prev_UART_state_bitmap & B_OVERRUN))
|
|
icount->parity++;
|
|
if ((UART_state_bitmap & B_PARITY) !=
|
|
(prev_UART_state_bitmap & B_PARITY))
|
|
icount->parity++;
|
|
if ((UART_state_bitmap & B_FRAMING) !=
|
|
(prev_UART_state_bitmap & B_FRAMING))
|
|
icount->frame++;
|
|
if ((UART_state_bitmap & B_RING_SIGNAL) &&
|
|
!(prev_UART_state_bitmap & B_RING_SIGNAL))
|
|
icount->rng++;
|
|
if ((UART_state_bitmap & B_BREAK) !=
|
|
(prev_UART_state_bitmap & B_BREAK))
|
|
icount->brk++;
|
|
if ((UART_state_bitmap & B_TX_CARRIER) !=
|
|
(prev_UART_state_bitmap & B_TX_CARRIER))
|
|
icount->dsr++;
|
|
if ((UART_state_bitmap & B_RX_CARRIER) !=
|
|
(prev_UART_state_bitmap & B_RX_CARRIER))
|
|
icount->dcd++;
|
|
tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
|
|
spin_unlock(&serial->serial_lock);
|
|
tiocmget->intr_completed = 1;
|
|
wake_up_interruptible(&tiocmget->waitq);
|
|
}
|
|
memset(serial_state_notification, 0,
|
|
sizeof(struct hso_serial_state_notification));
|
|
tiocmget_submit_urb(serial,
|
|
tiocmget,
|
|
serial->parent->usb);
|
|
}
|
|
|
|
/*
|
|
* next few functions largely stolen from drivers/serial/serial_core.c
|
|
*/
|
|
/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
|
|
* - mask passed in arg for lines of interest
|
|
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
|
|
* Caller should use TIOCGICOUNT to see which one it was
|
|
*/
|
|
static int
|
|
hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
struct uart_icount cprev, cnow;
|
|
struct hso_tiocmget *tiocmget;
|
|
int ret;
|
|
|
|
tiocmget = serial->tiocmget;
|
|
if (!tiocmget)
|
|
return -ENOENT;
|
|
/*
|
|
* note the counters on entry
|
|
*/
|
|
spin_lock_irq(&serial->serial_lock);
|
|
memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
|
|
spin_unlock_irq(&serial->serial_lock);
|
|
add_wait_queue(&tiocmget->waitq, &wait);
|
|
for (;;) {
|
|
spin_lock_irq(&serial->serial_lock);
|
|
memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
|
|
spin_unlock_irq(&serial->serial_lock);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
|
|
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
|
|
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd))) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
schedule();
|
|
/* see if a signal did it */
|
|
if (signal_pending(current)) {
|
|
ret = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
cprev = cnow;
|
|
}
|
|
current->state = TASK_RUNNING;
|
|
remove_wait_queue(&tiocmget->waitq, &wait);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
|
|
* Return: write counters to the user passed counter struct
|
|
* NB: both 1->0 and 0->1 transitions are counted except for
|
|
* RI where only 0->1 is counted.
|
|
*/
|
|
static int hso_get_count(struct hso_serial *serial,
|
|
struct serial_icounter_struct __user *icnt)
|
|
{
|
|
struct serial_icounter_struct icount;
|
|
struct uart_icount cnow;
|
|
struct hso_tiocmget *tiocmget = serial->tiocmget;
|
|
|
|
if (!tiocmget)
|
|
return -ENOENT;
|
|
spin_lock_irq(&serial->serial_lock);
|
|
memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
|
|
spin_unlock_irq(&serial->serial_lock);
|
|
|
|
icount.cts = cnow.cts;
|
|
icount.dsr = cnow.dsr;
|
|
icount.rng = cnow.rng;
|
|
icount.dcd = cnow.dcd;
|
|
icount.rx = cnow.rx;
|
|
icount.tx = cnow.tx;
|
|
icount.frame = cnow.frame;
|
|
icount.overrun = cnow.overrun;
|
|
icount.parity = cnow.parity;
|
|
icount.brk = cnow.brk;
|
|
icount.buf_overrun = cnow.buf_overrun;
|
|
|
|
return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
|
|
}
|
|
|
|
|
|
static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
|
|
{
|
|
int retval;
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
struct hso_tiocmget *tiocmget;
|
|
u16 UART_state_bitmap;
|
|
|
|
/* sanity check */
|
|
if (!serial) {
|
|
D1("no tty structures");
|
|
return -EINVAL;
|
|
}
|
|
spin_lock_irq(&serial->serial_lock);
|
|
retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
|
|
((serial->dtr_state) ? TIOCM_DTR : 0);
|
|
tiocmget = serial->tiocmget;
|
|
if (tiocmget) {
|
|
|
|
UART_state_bitmap = le16_to_cpu(
|
|
tiocmget->prev_UART_state_bitmap);
|
|
if (UART_state_bitmap & B_RING_SIGNAL)
|
|
retval |= TIOCM_RNG;
|
|
if (UART_state_bitmap & B_RX_CARRIER)
|
|
retval |= TIOCM_CD;
|
|
if (UART_state_bitmap & B_TX_CARRIER)
|
|
retval |= TIOCM_DSR;
|
|
}
|
|
spin_unlock_irq(&serial->serial_lock);
|
|
return retval;
|
|
}
|
|
|
|
static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
int val = 0;
|
|
unsigned long flags;
|
|
int if_num;
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
|
|
/* sanity check */
|
|
if (!serial) {
|
|
D1("no tty structures");
|
|
return -EINVAL;
|
|
}
|
|
if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
|
|
|
|
spin_lock_irqsave(&serial->serial_lock, flags);
|
|
if (set & TIOCM_RTS)
|
|
serial->rts_state = 1;
|
|
if (set & TIOCM_DTR)
|
|
serial->dtr_state = 1;
|
|
|
|
if (clear & TIOCM_RTS)
|
|
serial->rts_state = 0;
|
|
if (clear & TIOCM_DTR)
|
|
serial->dtr_state = 0;
|
|
|
|
if (serial->dtr_state)
|
|
val |= 0x01;
|
|
if (serial->rts_state)
|
|
val |= 0x02;
|
|
|
|
spin_unlock_irqrestore(&serial->serial_lock, flags);
|
|
|
|
return usb_control_msg(serial->parent->usb,
|
|
usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
|
|
0x21, val, if_num, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
}
|
|
|
|
static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct hso_serial *serial = get_serial_by_tty(tty);
|
|
void __user *uarg = (void __user *)arg;
|
|
int ret = 0;
|
|
D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
|
|
|
|
if (!serial)
|
|
return -ENODEV;
|
|
switch (cmd) {
|
|
case TIOCMIWAIT:
|
|
ret = hso_wait_modem_status(serial, arg);
|
|
break;
|
|
|
|
case TIOCGICOUNT:
|
|
ret = hso_get_count(serial, uarg);
|
|
break;
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* starts a transmit */
|
|
static void hso_kick_transmit(struct hso_serial *serial)
|
|
{
|
|
u8 *temp;
|
|
unsigned long flags;
|
|
int res;
|
|
|
|
spin_lock_irqsave(&serial->serial_lock, flags);
|
|
if (!serial->tx_buffer_count)
|
|
goto out;
|
|
|
|
if (serial->tx_urb_used)
|
|
goto out;
|
|
|
|
/* Wakeup USB interface if necessary */
|
|
if (hso_get_activity(serial->parent) == -EAGAIN)
|
|
goto out;
|
|
|
|
/* Switch pointers around to avoid memcpy */
|
|
temp = serial->tx_buffer;
|
|
serial->tx_buffer = serial->tx_data;
|
|
serial->tx_data = temp;
|
|
serial->tx_data_count = serial->tx_buffer_count;
|
|
serial->tx_buffer_count = 0;
|
|
|
|
/* If temp is set, it means we switched buffers */
|
|
if (temp && serial->write_data) {
|
|
res = serial->write_data(serial);
|
|
if (res >= 0)
|
|
serial->tx_urb_used = 1;
|
|
}
|
|
out:
|
|
spin_unlock_irqrestore(&serial->serial_lock, flags);
|
|
}
|
|
|
|
/* make a request (for reading and writing data to muxed serial port) */
|
|
static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
|
|
struct urb *ctrl_urb,
|
|
struct usb_ctrlrequest *ctrl_req,
|
|
u8 *ctrl_urb_data, u32 size)
|
|
{
|
|
int result;
|
|
int pipe;
|
|
|
|
/* Sanity check */
|
|
if (!serial || !ctrl_urb || !ctrl_req) {
|
|
printk(KERN_ERR "%s: Wrong arguments\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* initialize */
|
|
ctrl_req->wValue = 0;
|
|
ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
|
|
ctrl_req->wLength = cpu_to_le16(size);
|
|
|
|
if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
|
|
/* Reading command */
|
|
ctrl_req->bRequestType = USB_DIR_IN |
|
|
USB_TYPE_OPTION_VENDOR |
|
|
USB_RECIP_INTERFACE;
|
|
ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
|
|
pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
|
|
} else {
|
|
/* Writing command */
|
|
ctrl_req->bRequestType = USB_DIR_OUT |
|
|
USB_TYPE_OPTION_VENDOR |
|
|
USB_RECIP_INTERFACE;
|
|
ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
|
|
pipe = usb_sndctrlpipe(serial->parent->usb, 0);
|
|
}
|
|
/* syslog */
|
|
D2("%s command (%02x) len: %d, port: %d",
|
|
type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
|
|
ctrl_req->bRequestType, ctrl_req->wLength, port);
|
|
|
|
/* Load ctrl urb */
|
|
ctrl_urb->transfer_flags = 0;
|
|
usb_fill_control_urb(ctrl_urb,
|
|
serial->parent->usb,
|
|
pipe,
|
|
(u8 *) ctrl_req,
|
|
ctrl_urb_data, size, ctrl_callback, serial);
|
|
/* Send it on merry way */
|
|
result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
|
|
if (result) {
|
|
dev_err(&ctrl_urb->dev->dev,
|
|
"%s failed submit ctrl_urb %d type %d", __func__,
|
|
result, type);
|
|
return result;
|
|
}
|
|
|
|
/* done */
|
|
return size;
|
|
}
|
|
|
|
/* called by intr_callback when read occurs */
|
|
static int hso_mux_serial_read(struct hso_serial *serial)
|
|
{
|
|
if (!serial)
|
|
return -EINVAL;
|
|
|
|
/* clean data */
|
|
memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
|
|
/* make the request */
|
|
|
|
if (serial->num_rx_urbs != 1) {
|
|
dev_err(&serial->parent->interface->dev,
|
|
"ERROR: mux'd reads with multiple buffers "
|
|
"not possible\n");
|
|
return 0;
|
|
}
|
|
return mux_device_request(serial,
|
|
USB_CDC_GET_ENCAPSULATED_RESPONSE,
|
|
serial->parent->port_spec & HSO_PORT_MASK,
|
|
serial->rx_urb[0],
|
|
&serial->ctrl_req_rx,
|
|
serial->rx_data[0], serial->rx_data_length);
|
|
}
|
|
|
|
/* used for muxed serial port callback (muxed serial read) */
|
|
static void intr_callback(struct urb *urb)
|
|
{
|
|
struct hso_shared_int *shared_int = urb->context;
|
|
struct hso_serial *serial;
|
|
unsigned char *port_req;
|
|
int status = urb->status;
|
|
int i;
|
|
|
|
usb_mark_last_busy(urb->dev);
|
|
|
|
/* sanity check */
|
|
if (!shared_int)
|
|
return;
|
|
|
|
/* status check */
|
|
if (status) {
|
|
log_usb_status(status, __func__);
|
|
return;
|
|
}
|
|
D4("\n--- Got intr callback 0x%02X ---", status);
|
|
|
|
/* what request? */
|
|
port_req = urb->transfer_buffer;
|
|
D4(" port_req = 0x%.2X\n", *port_req);
|
|
/* loop over all muxed ports to find the one sending this */
|
|
for (i = 0; i < 8; i++) {
|
|
/* max 8 channels on MUX */
|
|
if (*port_req & (1 << i)) {
|
|
serial = get_serial_by_shared_int_and_type(shared_int,
|
|
(1 << i));
|
|
if (serial != NULL) {
|
|
D1("Pending read interrupt on port %d\n", i);
|
|
spin_lock(&serial->serial_lock);
|
|
if (serial->rx_state == RX_IDLE) {
|
|
/* Setup and send a ctrl req read on
|
|
* port i */
|
|
if (!serial->rx_urb_filled[0]) {
|
|
serial->rx_state = RX_SENT;
|
|
hso_mux_serial_read(serial);
|
|
} else
|
|
serial->rx_state = RX_PENDING;
|
|
|
|
} else {
|
|
D1("Already pending a read on "
|
|
"port %d\n", i);
|
|
}
|
|
spin_unlock(&serial->serial_lock);
|
|
}
|
|
}
|
|
}
|
|
/* Resubmit interrupt urb */
|
|
hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
|
|
}
|
|
|
|
/* called for writing to muxed serial port */
|
|
static int hso_mux_serial_write_data(struct hso_serial *serial)
|
|
{
|
|
if (NULL == serial)
|
|
return -EINVAL;
|
|
|
|
return mux_device_request(serial,
|
|
USB_CDC_SEND_ENCAPSULATED_COMMAND,
|
|
serial->parent->port_spec & HSO_PORT_MASK,
|
|
serial->tx_urb,
|
|
&serial->ctrl_req_tx,
|
|
serial->tx_data, serial->tx_data_count);
|
|
}
|
|
|
|
/* write callback for Diag and CS port */
|
|
static void hso_std_serial_write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct hso_serial *serial = urb->context;
|
|
int status = urb->status;
|
|
struct tty_struct *tty;
|
|
|
|
/* sanity check */
|
|
if (!serial) {
|
|
D1("serial == NULL");
|
|
return;
|
|
}
|
|
|
|
spin_lock(&serial->serial_lock);
|
|
serial->tx_urb_used = 0;
|
|
tty = tty_kref_get(serial->tty);
|
|
spin_unlock(&serial->serial_lock);
|
|
if (status) {
|
|
log_usb_status(status, __func__);
|
|
tty_kref_put(tty);
|
|
return;
|
|
}
|
|
hso_put_activity(serial->parent);
|
|
if (tty) {
|
|
tty_wakeup(tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
hso_kick_transmit(serial);
|
|
|
|
D1(" ");
|
|
return;
|
|
}
|
|
|
|
/* called for writing diag or CS serial port */
|
|
static int hso_std_serial_write_data(struct hso_serial *serial)
|
|
{
|
|
int count = serial->tx_data_count;
|
|
int result;
|
|
|
|
usb_fill_bulk_urb(serial->tx_urb,
|
|
serial->parent->usb,
|
|
usb_sndbulkpipe(serial->parent->usb,
|
|
serial->out_endp->
|
|
bEndpointAddress & 0x7F),
|
|
serial->tx_data, serial->tx_data_count,
|
|
hso_std_serial_write_bulk_callback, serial);
|
|
|
|
result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
|
|
if (result) {
|
|
dev_warn(&serial->parent->usb->dev,
|
|
"Failed to submit urb - res %d\n", result);
|
|
return result;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
/* callback after read or write on muxed serial port */
|
|
static void ctrl_callback(struct urb *urb)
|
|
{
|
|
struct hso_serial *serial = urb->context;
|
|
struct usb_ctrlrequest *req;
|
|
int status = urb->status;
|
|
struct tty_struct *tty;
|
|
|
|
/* sanity check */
|
|
if (!serial)
|
|
return;
|
|
|
|
spin_lock(&serial->serial_lock);
|
|
serial->tx_urb_used = 0;
|
|
tty = tty_kref_get(serial->tty);
|
|
spin_unlock(&serial->serial_lock);
|
|
if (status) {
|
|
log_usb_status(status, __func__);
|
|
tty_kref_put(tty);
|
|
return;
|
|
}
|
|
|
|
/* what request? */
|
|
req = (struct usb_ctrlrequest *)(urb->setup_packet);
|
|
D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
|
|
D4("Actual length of urb = %d\n", urb->actual_length);
|
|
DUMP1(urb->transfer_buffer, urb->actual_length);
|
|
|
|
if (req->bRequestType ==
|
|
(USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
|
|
/* response to a read command */
|
|
serial->rx_urb_filled[0] = 1;
|
|
spin_lock(&serial->serial_lock);
|
|
put_rxbuf_data_and_resubmit_ctrl_urb(serial);
|
|
spin_unlock(&serial->serial_lock);
|
|
} else {
|
|
hso_put_activity(serial->parent);
|
|
if (tty)
|
|
tty_wakeup(tty);
|
|
/* response to a write command */
|
|
hso_kick_transmit(serial);
|
|
}
|
|
tty_kref_put(tty);
|
|
}
|
|
|
|
/* handle RX data for serial port */
|
|
static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
|
|
{
|
|
struct tty_struct *tty;
|
|
int write_length_remaining = 0;
|
|
int curr_write_len;
|
|
|
|
/* Sanity check */
|
|
if (urb == NULL || serial == NULL) {
|
|
D1("serial = NULL");
|
|
return -2;
|
|
}
|
|
|
|
/* All callers to put_rxbuf_data hold serial_lock */
|
|
tty = tty_kref_get(serial->tty);
|
|
|
|
/* Push data to tty */
|
|
if (tty) {
|
|
write_length_remaining = urb->actual_length -
|
|
serial->curr_rx_urb_offset;
|
|
D1("data to push to tty");
|
|
while (write_length_remaining) {
|
|
if (test_bit(TTY_THROTTLED, &tty->flags)) {
|
|
tty_kref_put(tty);
|
|
return -1;
|
|
}
|
|
curr_write_len = tty_insert_flip_string
|
|
(tty, urb->transfer_buffer +
|
|
serial->curr_rx_urb_offset,
|
|
write_length_remaining);
|
|
serial->curr_rx_urb_offset += curr_write_len;
|
|
write_length_remaining -= curr_write_len;
|
|
tty_flip_buffer_push(tty);
|
|
}
|
|
}
|
|
if (write_length_remaining == 0) {
|
|
serial->curr_rx_urb_offset = 0;
|
|
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
|
|
}
|
|
tty_kref_put(tty);
|
|
return write_length_remaining;
|
|
}
|
|
|
|
|
|
/* Base driver functions */
|
|
|
|
static void hso_log_port(struct hso_device *hso_dev)
|
|
{
|
|
char *port_type;
|
|
char port_dev[20];
|
|
|
|
switch (hso_dev->port_spec & HSO_PORT_MASK) {
|
|
case HSO_PORT_CONTROL:
|
|
port_type = "Control";
|
|
break;
|
|
case HSO_PORT_APP:
|
|
port_type = "Application";
|
|
break;
|
|
case HSO_PORT_GPS:
|
|
port_type = "GPS";
|
|
break;
|
|
case HSO_PORT_GPS_CONTROL:
|
|
port_type = "GPS control";
|
|
break;
|
|
case HSO_PORT_APP2:
|
|
port_type = "Application2";
|
|
break;
|
|
case HSO_PORT_PCSC:
|
|
port_type = "PCSC";
|
|
break;
|
|
case HSO_PORT_DIAG:
|
|
port_type = "Diagnostic";
|
|
break;
|
|
case HSO_PORT_DIAG2:
|
|
port_type = "Diagnostic2";
|
|
break;
|
|
case HSO_PORT_MODEM:
|
|
port_type = "Modem";
|
|
break;
|
|
case HSO_PORT_NETWORK:
|
|
port_type = "Network";
|
|
break;
|
|
default:
|
|
port_type = "Unknown";
|
|
break;
|
|
}
|
|
if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
|
|
sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
|
|
} else
|
|
sprintf(port_dev, "/dev/%s%d", tty_filename,
|
|
dev2ser(hso_dev)->minor);
|
|
|
|
dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
|
|
port_type, port_dev);
|
|
}
|
|
|
|
static int hso_start_net_device(struct hso_device *hso_dev)
|
|
{
|
|
int i, result = 0;
|
|
struct hso_net *hso_net = dev2net(hso_dev);
|
|
|
|
if (!hso_net)
|
|
return -ENODEV;
|
|
|
|
/* send URBs for all read buffers */
|
|
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
|
|
|
|
/* Prep a receive URB */
|
|
usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
|
|
hso_dev->usb,
|
|
usb_rcvbulkpipe(hso_dev->usb,
|
|
hso_net->in_endp->
|
|
bEndpointAddress & 0x7F),
|
|
hso_net->mux_bulk_rx_buf_pool[i],
|
|
MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
|
|
hso_net);
|
|
|
|
/* Put it out there so the device can send us stuff */
|
|
result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
|
|
GFP_NOIO);
|
|
if (result)
|
|
dev_warn(&hso_dev->usb->dev,
|
|
"%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
|
|
i, result);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int hso_stop_net_device(struct hso_device *hso_dev)
|
|
{
|
|
int i;
|
|
struct hso_net *hso_net = dev2net(hso_dev);
|
|
|
|
if (!hso_net)
|
|
return -ENODEV;
|
|
|
|
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
|
|
if (hso_net->mux_bulk_rx_urb_pool[i])
|
|
usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
|
|
|
|
}
|
|
if (hso_net->mux_bulk_tx_urb)
|
|
usb_kill_urb(hso_net->mux_bulk_tx_urb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
|
|
{
|
|
int i, result = 0;
|
|
struct hso_serial *serial = dev2ser(hso_dev);
|
|
|
|
if (!serial)
|
|
return -ENODEV;
|
|
|
|
/* If it is not the MUX port fill in and submit a bulk urb (already
|
|
* allocated in hso_serial_start) */
|
|
if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
|
|
for (i = 0; i < serial->num_rx_urbs; i++) {
|
|
usb_fill_bulk_urb(serial->rx_urb[i],
|
|
serial->parent->usb,
|
|
usb_rcvbulkpipe(serial->parent->usb,
|
|
serial->in_endp->
|
|
bEndpointAddress &
|
|
0x7F),
|
|
serial->rx_data[i],
|
|
serial->rx_data_length,
|
|
hso_std_serial_read_bulk_callback,
|
|
serial);
|
|
result = usb_submit_urb(serial->rx_urb[i], flags);
|
|
if (result) {
|
|
dev_warn(&serial->parent->usb->dev,
|
|
"Failed to submit urb - res %d\n",
|
|
result);
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
mutex_lock(&serial->shared_int->shared_int_lock);
|
|
if (!serial->shared_int->use_count) {
|
|
result =
|
|
hso_mux_submit_intr_urb(serial->shared_int,
|
|
hso_dev->usb, flags);
|
|
}
|
|
serial->shared_int->use_count++;
|
|
mutex_unlock(&serial->shared_int->shared_int_lock);
|
|
}
|
|
if (serial->tiocmget)
|
|
tiocmget_submit_urb(serial,
|
|
serial->tiocmget,
|
|
serial->parent->usb);
|
|
return result;
|
|
}
|
|
|
|
static int hso_stop_serial_device(struct hso_device *hso_dev)
|
|
{
|
|
int i;
|
|
struct hso_serial *serial = dev2ser(hso_dev);
|
|
struct hso_tiocmget *tiocmget;
|
|
|
|
if (!serial)
|
|
return -ENODEV;
|
|
|
|
for (i = 0; i < serial->num_rx_urbs; i++) {
|
|
if (serial->rx_urb[i]) {
|
|
usb_kill_urb(serial->rx_urb[i]);
|
|
serial->rx_urb_filled[i] = 0;
|
|
}
|
|
}
|
|
serial->curr_rx_urb_idx = 0;
|
|
serial->curr_rx_urb_offset = 0;
|
|
|
|
if (serial->tx_urb)
|
|
usb_kill_urb(serial->tx_urb);
|
|
|
|
if (serial->shared_int) {
|
|
mutex_lock(&serial->shared_int->shared_int_lock);
|
|
if (serial->shared_int->use_count &&
|
|
(--serial->shared_int->use_count == 0)) {
|
|
struct urb *urb;
|
|
|
|
urb = serial->shared_int->shared_intr_urb;
|
|
if (urb)
|
|
usb_kill_urb(urb);
|
|
}
|
|
mutex_unlock(&serial->shared_int->shared_int_lock);
|
|
}
|
|
tiocmget = serial->tiocmget;
|
|
if (tiocmget) {
|
|
wake_up_interruptible(&tiocmget->waitq);
|
|
usb_kill_urb(tiocmget->urb);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hso_serial_common_free(struct hso_serial *serial)
|
|
{
|
|
int i;
|
|
|
|
if (serial->parent->dev)
|
|
device_remove_file(serial->parent->dev, &dev_attr_hsotype);
|
|
|
|
tty_unregister_device(tty_drv, serial->minor);
|
|
|
|
for (i = 0; i < serial->num_rx_urbs; i++) {
|
|
/* unlink and free RX URB */
|
|
usb_free_urb(serial->rx_urb[i]);
|
|
/* free the RX buffer */
|
|
kfree(serial->rx_data[i]);
|
|
}
|
|
|
|
/* unlink and free TX URB */
|
|
usb_free_urb(serial->tx_urb);
|
|
kfree(serial->tx_data);
|
|
}
|
|
|
|
static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
|
|
int rx_size, int tx_size)
|
|
{
|
|
struct device *dev;
|
|
int minor;
|
|
int i;
|
|
|
|
minor = get_free_serial_index();
|
|
if (minor < 0)
|
|
goto exit;
|
|
|
|
/* register our minor number */
|
|
serial->parent->dev = tty_register_device(tty_drv, minor,
|
|
&serial->parent->interface->dev);
|
|
dev = serial->parent->dev;
|
|
dev_set_drvdata(dev, serial->parent);
|
|
i = device_create_file(dev, &dev_attr_hsotype);
|
|
|
|
/* fill in specific data for later use */
|
|
serial->minor = minor;
|
|
serial->magic = HSO_SERIAL_MAGIC;
|
|
spin_lock_init(&serial->serial_lock);
|
|
serial->num_rx_urbs = num_urbs;
|
|
|
|
/* RX, allocate urb and initialize */
|
|
|
|
/* prepare our RX buffer */
|
|
serial->rx_data_length = rx_size;
|
|
for (i = 0; i < serial->num_rx_urbs; i++) {
|
|
serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!serial->rx_urb[i]) {
|
|
dev_err(dev, "Could not allocate urb?\n");
|
|
goto exit;
|
|
}
|
|
serial->rx_urb[i]->transfer_buffer = NULL;
|
|
serial->rx_urb[i]->transfer_buffer_length = 0;
|
|
serial->rx_data[i] = kzalloc(serial->rx_data_length,
|
|
GFP_KERNEL);
|
|
if (!serial->rx_data[i]) {
|
|
dev_err(dev, "%s - Out of memory\n", __func__);
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
/* TX, allocate urb and initialize */
|
|
serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!serial->tx_urb) {
|
|
dev_err(dev, "Could not allocate urb?\n");
|
|
goto exit;
|
|
}
|
|
serial->tx_urb->transfer_buffer = NULL;
|
|
serial->tx_urb->transfer_buffer_length = 0;
|
|
/* prepare our TX buffer */
|
|
serial->tx_data_count = 0;
|
|
serial->tx_buffer_count = 0;
|
|
serial->tx_data_length = tx_size;
|
|
serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
|
|
if (!serial->tx_data) {
|
|
dev_err(dev, "%s - Out of memory", __func__);
|
|
goto exit;
|
|
}
|
|
serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
|
|
if (!serial->tx_buffer) {
|
|
dev_err(dev, "%s - Out of memory", __func__);
|
|
goto exit;
|
|
}
|
|
|
|
return 0;
|
|
exit:
|
|
hso_serial_common_free(serial);
|
|
return -1;
|
|
}
|
|
|
|
/* Creates a general hso device */
|
|
static struct hso_device *hso_create_device(struct usb_interface *intf,
|
|
int port_spec)
|
|
{
|
|
struct hso_device *hso_dev;
|
|
|
|
hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
|
|
if (!hso_dev)
|
|
return NULL;
|
|
|
|
hso_dev->port_spec = port_spec;
|
|
hso_dev->usb = interface_to_usbdev(intf);
|
|
hso_dev->interface = intf;
|
|
kref_init(&hso_dev->ref);
|
|
mutex_init(&hso_dev->mutex);
|
|
|
|
INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
|
|
INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
|
|
|
|
return hso_dev;
|
|
}
|
|
|
|
/* Removes a network device in the network device table */
|
|
static int remove_net_device(struct hso_device *hso_dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
|
|
if (network_table[i] == hso_dev) {
|
|
network_table[i] = NULL;
|
|
break;
|
|
}
|
|
}
|
|
if (i == HSO_MAX_NET_DEVICES)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
/* Frees our network device */
|
|
static void hso_free_net_device(struct hso_device *hso_dev)
|
|
{
|
|
int i;
|
|
struct hso_net *hso_net = dev2net(hso_dev);
|
|
|
|
if (!hso_net)
|
|
return;
|
|
|
|
remove_net_device(hso_net->parent);
|
|
|
|
if (hso_net->net) {
|
|
unregister_netdev(hso_net->net);
|
|
free_netdev(hso_net->net);
|
|
}
|
|
|
|
/* start freeing */
|
|
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
|
|
usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
|
|
kfree(hso_net->mux_bulk_rx_buf_pool[i]);
|
|
hso_net->mux_bulk_rx_buf_pool[i] = NULL;
|
|
}
|
|
usb_free_urb(hso_net->mux_bulk_tx_urb);
|
|
kfree(hso_net->mux_bulk_tx_buf);
|
|
hso_net->mux_bulk_tx_buf = NULL;
|
|
|
|
kfree(hso_dev);
|
|
}
|
|
|
|
static const struct net_device_ops hso_netdev_ops = {
|
|
.ndo_open = hso_net_open,
|
|
.ndo_stop = hso_net_close,
|
|
.ndo_start_xmit = hso_net_start_xmit,
|
|
.ndo_tx_timeout = hso_net_tx_timeout,
|
|
};
|
|
|
|
/* initialize the network interface */
|
|
static void hso_net_init(struct net_device *net)
|
|
{
|
|
struct hso_net *hso_net = netdev_priv(net);
|
|
|
|
D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
|
|
|
|
/* fill in the other fields */
|
|
net->netdev_ops = &hso_netdev_ops;
|
|
net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
|
|
net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
|
|
net->type = ARPHRD_NONE;
|
|
net->mtu = DEFAULT_MTU - 14;
|
|
net->tx_queue_len = 10;
|
|
SET_ETHTOOL_OPS(net, &ops);
|
|
|
|
/* and initialize the semaphore */
|
|
spin_lock_init(&hso_net->net_lock);
|
|
}
|
|
|
|
/* Adds a network device in the network device table */
|
|
static int add_net_device(struct hso_device *hso_dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
|
|
if (network_table[i] == NULL) {
|
|
network_table[i] = hso_dev;
|
|
break;
|
|
}
|
|
}
|
|
if (i == HSO_MAX_NET_DEVICES)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int hso_rfkill_set_block(void *data, bool blocked)
|
|
{
|
|
struct hso_device *hso_dev = data;
|
|
int enabled = !blocked;
|
|
int rv;
|
|
|
|
mutex_lock(&hso_dev->mutex);
|
|
if (hso_dev->usb_gone)
|
|
rv = 0;
|
|
else
|
|
rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
|
|
enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
mutex_unlock(&hso_dev->mutex);
|
|
return rv;
|
|
}
|
|
|
|
static const struct rfkill_ops hso_rfkill_ops = {
|
|
.set_block = hso_rfkill_set_block,
|
|
};
|
|
|
|
/* Creates and sets up everything for rfkill */
|
|
static void hso_create_rfkill(struct hso_device *hso_dev,
|
|
struct usb_interface *interface)
|
|
{
|
|
struct hso_net *hso_net = dev2net(hso_dev);
|
|
struct device *dev = &hso_net->net->dev;
|
|
char *rfkn;
|
|
|
|
rfkn = kzalloc(20, GFP_KERNEL);
|
|
if (!rfkn)
|
|
dev_err(dev, "%s - Out of memory\n", __func__);
|
|
|
|
snprintf(rfkn, 20, "hso-%d",
|
|
interface->altsetting->desc.bInterfaceNumber);
|
|
|
|
hso_net->rfkill = rfkill_alloc(rfkn,
|
|
&interface_to_usbdev(interface)->dev,
|
|
RFKILL_TYPE_WWAN,
|
|
&hso_rfkill_ops, hso_dev);
|
|
if (!hso_net->rfkill) {
|
|
dev_err(dev, "%s - Out of memory\n", __func__);
|
|
kfree(rfkn);
|
|
return;
|
|
}
|
|
if (rfkill_register(hso_net->rfkill) < 0) {
|
|
rfkill_destroy(hso_net->rfkill);
|
|
kfree(rfkn);
|
|
hso_net->rfkill = NULL;
|
|
dev_err(dev, "%s - Failed to register rfkill\n", __func__);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static struct device_type hso_type = {
|
|
.name = "wwan",
|
|
};
|
|
|
|
/* Creates our network device */
|
|
static struct hso_device *hso_create_net_device(struct usb_interface *interface,
|
|
int port_spec)
|
|
{
|
|
int result, i;
|
|
struct net_device *net;
|
|
struct hso_net *hso_net;
|
|
struct hso_device *hso_dev;
|
|
|
|
hso_dev = hso_create_device(interface, port_spec);
|
|
if (!hso_dev)
|
|
return NULL;
|
|
|
|
/* allocate our network device, then we can put in our private data */
|
|
/* call hso_net_init to do the basic initialization */
|
|
net = alloc_netdev(sizeof(struct hso_net), "hso%d", hso_net_init);
|
|
if (!net) {
|
|
dev_err(&interface->dev, "Unable to create ethernet device\n");
|
|
goto exit;
|
|
}
|
|
|
|
hso_net = netdev_priv(net);
|
|
|
|
hso_dev->port_data.dev_net = hso_net;
|
|
hso_net->net = net;
|
|
hso_net->parent = hso_dev;
|
|
|
|
hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
|
|
USB_DIR_IN);
|
|
if (!hso_net->in_endp) {
|
|
dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
|
|
goto exit;
|
|
}
|
|
hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
|
|
USB_DIR_OUT);
|
|
if (!hso_net->out_endp) {
|
|
dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
|
|
goto exit;
|
|
}
|
|
SET_NETDEV_DEV(net, &interface->dev);
|
|
SET_NETDEV_DEVTYPE(net, &hso_type);
|
|
|
|
/* registering our net device */
|
|
result = register_netdev(net);
|
|
if (result) {
|
|
dev_err(&interface->dev, "Failed to register device\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* start allocating */
|
|
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
|
|
hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!hso_net->mux_bulk_rx_urb_pool[i]) {
|
|
dev_err(&interface->dev, "Could not allocate rx urb\n");
|
|
goto exit;
|
|
}
|
|
hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
|
|
GFP_KERNEL);
|
|
if (!hso_net->mux_bulk_rx_buf_pool[i]) {
|
|
dev_err(&interface->dev, "Could not allocate rx buf\n");
|
|
goto exit;
|
|
}
|
|
}
|
|
hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!hso_net->mux_bulk_tx_urb) {
|
|
dev_err(&interface->dev, "Could not allocate tx urb\n");
|
|
goto exit;
|
|
}
|
|
hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
|
|
if (!hso_net->mux_bulk_tx_buf) {
|
|
dev_err(&interface->dev, "Could not allocate tx buf\n");
|
|
goto exit;
|
|
}
|
|
|
|
add_net_device(hso_dev);
|
|
|
|
hso_log_port(hso_dev);
|
|
|
|
hso_create_rfkill(hso_dev, interface);
|
|
|
|
return hso_dev;
|
|
exit:
|
|
hso_free_net_device(hso_dev);
|
|
return NULL;
|
|
}
|
|
|
|
static void hso_free_tiomget(struct hso_serial *serial)
|
|
{
|
|
struct hso_tiocmget *tiocmget = serial->tiocmget;
|
|
if (tiocmget) {
|
|
if (tiocmget->urb) {
|
|
usb_free_urb(tiocmget->urb);
|
|
tiocmget->urb = NULL;
|
|
}
|
|
serial->tiocmget = NULL;
|
|
kfree(tiocmget);
|
|
|
|
}
|
|
}
|
|
|
|
/* Frees an AT channel ( goes for both mux and non-mux ) */
|
|
static void hso_free_serial_device(struct hso_device *hso_dev)
|
|
{
|
|
struct hso_serial *serial = dev2ser(hso_dev);
|
|
|
|
if (!serial)
|
|
return;
|
|
set_serial_by_index(serial->minor, NULL);
|
|
|
|
hso_serial_common_free(serial);
|
|
|
|
if (serial->shared_int) {
|
|
mutex_lock(&serial->shared_int->shared_int_lock);
|
|
if (--serial->shared_int->ref_count == 0)
|
|
hso_free_shared_int(serial->shared_int);
|
|
else
|
|
mutex_unlock(&serial->shared_int->shared_int_lock);
|
|
}
|
|
hso_free_tiomget(serial);
|
|
kfree(serial);
|
|
kfree(hso_dev);
|
|
}
|
|
|
|
/* Creates a bulk AT channel */
|
|
static struct hso_device *hso_create_bulk_serial_device(
|
|
struct usb_interface *interface, int port)
|
|
{
|
|
struct hso_device *hso_dev;
|
|
struct hso_serial *serial;
|
|
int num_urbs;
|
|
struct hso_tiocmget *tiocmget;
|
|
|
|
hso_dev = hso_create_device(interface, port);
|
|
if (!hso_dev)
|
|
return NULL;
|
|
|
|
serial = kzalloc(sizeof(*serial), GFP_KERNEL);
|
|
if (!serial)
|
|
goto exit;
|
|
|
|
serial->parent = hso_dev;
|
|
hso_dev->port_data.dev_serial = serial;
|
|
|
|
if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
|
|
num_urbs = 2;
|
|
serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
|
|
GFP_KERNEL);
|
|
/* it isn't going to break our heart if serial->tiocmget
|
|
* allocation fails don't bother checking this.
|
|
*/
|
|
if (serial->tiocmget) {
|
|
tiocmget = serial->tiocmget;
|
|
tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (tiocmget->urb) {
|
|
mutex_init(&tiocmget->mutex);
|
|
init_waitqueue_head(&tiocmget->waitq);
|
|
tiocmget->endp = hso_get_ep(
|
|
interface,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_DIR_IN);
|
|
} else
|
|
hso_free_tiomget(serial);
|
|
}
|
|
}
|
|
else
|
|
num_urbs = 1;
|
|
|
|
if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
|
|
BULK_URB_TX_SIZE))
|
|
goto exit;
|
|
|
|
serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
|
|
USB_DIR_IN);
|
|
if (!serial->in_endp) {
|
|
dev_err(&interface->dev, "Failed to find BULK IN ep\n");
|
|
goto exit2;
|
|
}
|
|
|
|
if (!
|
|
(serial->out_endp =
|
|
hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
|
|
dev_err(&interface->dev, "Failed to find BULK IN ep\n");
|
|
goto exit2;
|
|
}
|
|
|
|
serial->write_data = hso_std_serial_write_data;
|
|
|
|
/* and record this serial */
|
|
set_serial_by_index(serial->minor, serial);
|
|
|
|
/* setup the proc dirs and files if needed */
|
|
hso_log_port(hso_dev);
|
|
|
|
/* done, return it */
|
|
return hso_dev;
|
|
|
|
exit2:
|
|
hso_serial_common_free(serial);
|
|
exit:
|
|
hso_free_tiomget(serial);
|
|
kfree(serial);
|
|
kfree(hso_dev);
|
|
return NULL;
|
|
}
|
|
|
|
/* Creates a multiplexed AT channel */
|
|
static
|
|
struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
|
|
int port,
|
|
struct hso_shared_int *mux)
|
|
{
|
|
struct hso_device *hso_dev;
|
|
struct hso_serial *serial;
|
|
int port_spec;
|
|
|
|
port_spec = HSO_INTF_MUX;
|
|
port_spec &= ~HSO_PORT_MASK;
|
|
|
|
port_spec |= hso_mux_to_port(port);
|
|
if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
|
|
return NULL;
|
|
|
|
hso_dev = hso_create_device(interface, port_spec);
|
|
if (!hso_dev)
|
|
return NULL;
|
|
|
|
serial = kzalloc(sizeof(*serial), GFP_KERNEL);
|
|
if (!serial)
|
|
goto exit;
|
|
|
|
hso_dev->port_data.dev_serial = serial;
|
|
serial->parent = hso_dev;
|
|
|
|
if (hso_serial_common_create
|
|
(serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
|
|
goto exit;
|
|
|
|
serial->tx_data_length--;
|
|
serial->write_data = hso_mux_serial_write_data;
|
|
|
|
serial->shared_int = mux;
|
|
mutex_lock(&serial->shared_int->shared_int_lock);
|
|
serial->shared_int->ref_count++;
|
|
mutex_unlock(&serial->shared_int->shared_int_lock);
|
|
|
|
/* and record this serial */
|
|
set_serial_by_index(serial->minor, serial);
|
|
|
|
/* setup the proc dirs and files if needed */
|
|
hso_log_port(hso_dev);
|
|
|
|
/* done, return it */
|
|
return hso_dev;
|
|
|
|
exit:
|
|
if (serial) {
|
|
tty_unregister_device(tty_drv, serial->minor);
|
|
kfree(serial);
|
|
}
|
|
if (hso_dev)
|
|
kfree(hso_dev);
|
|
return NULL;
|
|
|
|
}
|
|
|
|
static void hso_free_shared_int(struct hso_shared_int *mux)
|
|
{
|
|
usb_free_urb(mux->shared_intr_urb);
|
|
kfree(mux->shared_intr_buf);
|
|
mutex_unlock(&mux->shared_int_lock);
|
|
kfree(mux);
|
|
}
|
|
|
|
static
|
|
struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
|
|
{
|
|
struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
|
|
|
|
if (!mux)
|
|
return NULL;
|
|
|
|
mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
|
|
USB_DIR_IN);
|
|
if (!mux->intr_endp) {
|
|
dev_err(&interface->dev, "Can't find INT IN endpoint\n");
|
|
goto exit;
|
|
}
|
|
|
|
mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!mux->shared_intr_urb) {
|
|
dev_err(&interface->dev, "Could not allocate intr urb?");
|
|
goto exit;
|
|
}
|
|
mux->shared_intr_buf = kzalloc(mux->intr_endp->wMaxPacketSize,
|
|
GFP_KERNEL);
|
|
if (!mux->shared_intr_buf) {
|
|
dev_err(&interface->dev, "Could not allocate intr buf?");
|
|
goto exit;
|
|
}
|
|
|
|
mutex_init(&mux->shared_int_lock);
|
|
|
|
return mux;
|
|
|
|
exit:
|
|
kfree(mux->shared_intr_buf);
|
|
usb_free_urb(mux->shared_intr_urb);
|
|
kfree(mux);
|
|
return NULL;
|
|
}
|
|
|
|
/* Gets the port spec for a certain interface */
|
|
static int hso_get_config_data(struct usb_interface *interface)
|
|
{
|
|
struct usb_device *usbdev = interface_to_usbdev(interface);
|
|
u8 config_data[17];
|
|
u32 if_num = interface->altsetting->desc.bInterfaceNumber;
|
|
s32 result;
|
|
|
|
if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
|
|
0x86, 0xC0, 0, 0, config_data, 17,
|
|
USB_CTRL_SET_TIMEOUT) != 0x11) {
|
|
return -EIO;
|
|
}
|
|
|
|
switch (config_data[if_num]) {
|
|
case 0x0:
|
|
result = 0;
|
|
break;
|
|
case 0x1:
|
|
result = HSO_PORT_DIAG;
|
|
break;
|
|
case 0x2:
|
|
result = HSO_PORT_GPS;
|
|
break;
|
|
case 0x3:
|
|
result = HSO_PORT_GPS_CONTROL;
|
|
break;
|
|
case 0x4:
|
|
result = HSO_PORT_APP;
|
|
break;
|
|
case 0x5:
|
|
result = HSO_PORT_APP2;
|
|
break;
|
|
case 0x6:
|
|
result = HSO_PORT_CONTROL;
|
|
break;
|
|
case 0x7:
|
|
result = HSO_PORT_NETWORK;
|
|
break;
|
|
case 0x8:
|
|
result = HSO_PORT_MODEM;
|
|
break;
|
|
case 0x9:
|
|
result = HSO_PORT_MSD;
|
|
break;
|
|
case 0xa:
|
|
result = HSO_PORT_PCSC;
|
|
break;
|
|
case 0xb:
|
|
result = HSO_PORT_VOICE;
|
|
break;
|
|
default:
|
|
result = 0;
|
|
}
|
|
|
|
if (result)
|
|
result |= HSO_INTF_BULK;
|
|
|
|
if (config_data[16] & 0x1)
|
|
result |= HSO_INFO_CRC_BUG;
|
|
|
|
return result;
|
|
}
|
|
|
|
/* called once for each interface upon device insertion */
|
|
static int hso_probe(struct usb_interface *interface,
|
|
const struct usb_device_id *id)
|
|
{
|
|
int mux, i, if_num, port_spec;
|
|
unsigned char port_mask;
|
|
struct hso_device *hso_dev = NULL;
|
|
struct hso_shared_int *shared_int;
|
|
struct hso_device *tmp_dev = NULL;
|
|
|
|
if_num = interface->altsetting->desc.bInterfaceNumber;
|
|
|
|
/* Get the interface/port specification from either driver_info or from
|
|
* the device itself */
|
|
if (id->driver_info)
|
|
port_spec = ((u32 *)(id->driver_info))[if_num];
|
|
else
|
|
port_spec = hso_get_config_data(interface);
|
|
|
|
if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
|
|
dev_err(&interface->dev, "Not our interface\n");
|
|
return -ENODEV;
|
|
}
|
|
/* Check if we need to switch to alt interfaces prior to port
|
|
* configuration */
|
|
if (interface->num_altsetting > 1)
|
|
usb_set_interface(interface_to_usbdev(interface), if_num, 1);
|
|
interface->needs_remote_wakeup = 1;
|
|
|
|
/* Allocate new hso device(s) */
|
|
switch (port_spec & HSO_INTF_MASK) {
|
|
case HSO_INTF_MUX:
|
|
if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
|
|
/* Create the network device */
|
|
if (!disable_net) {
|
|
hso_dev = hso_create_net_device(interface,
|
|
port_spec);
|
|
if (!hso_dev)
|
|
goto exit;
|
|
tmp_dev = hso_dev;
|
|
}
|
|
}
|
|
|
|
if (hso_get_mux_ports(interface, &port_mask))
|
|
/* TODO: de-allocate everything */
|
|
goto exit;
|
|
|
|
shared_int = hso_create_shared_int(interface);
|
|
if (!shared_int)
|
|
goto exit;
|
|
|
|
for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
|
|
if (port_mask & i) {
|
|
hso_dev = hso_create_mux_serial_device(
|
|
interface, i, shared_int);
|
|
if (!hso_dev)
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
if (tmp_dev)
|
|
hso_dev = tmp_dev;
|
|
break;
|
|
|
|
case HSO_INTF_BULK:
|
|
/* It's a regular bulk interface */
|
|
if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK)
|
|
&& !disable_net)
|
|
hso_dev = hso_create_net_device(interface, port_spec);
|
|
else
|
|
hso_dev =
|
|
hso_create_bulk_serial_device(interface, port_spec);
|
|
if (!hso_dev)
|
|
goto exit;
|
|
break;
|
|
default:
|
|
goto exit;
|
|
}
|
|
|
|
/* save our data pointer in this device */
|
|
usb_set_intfdata(interface, hso_dev);
|
|
|
|
/* done */
|
|
return 0;
|
|
exit:
|
|
hso_free_interface(interface);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* device removed, cleaning up */
|
|
static void hso_disconnect(struct usb_interface *interface)
|
|
{
|
|
hso_free_interface(interface);
|
|
|
|
/* remove reference of our private data */
|
|
usb_set_intfdata(interface, NULL);
|
|
}
|
|
|
|
static void async_get_intf(struct work_struct *data)
|
|
{
|
|
struct hso_device *hso_dev =
|
|
container_of(data, struct hso_device, async_get_intf);
|
|
usb_autopm_get_interface(hso_dev->interface);
|
|
}
|
|
|
|
static void async_put_intf(struct work_struct *data)
|
|
{
|
|
struct hso_device *hso_dev =
|
|
container_of(data, struct hso_device, async_put_intf);
|
|
usb_autopm_put_interface(hso_dev->interface);
|
|
}
|
|
|
|
static int hso_get_activity(struct hso_device *hso_dev)
|
|
{
|
|
if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
|
|
if (!hso_dev->is_active) {
|
|
hso_dev->is_active = 1;
|
|
schedule_work(&hso_dev->async_get_intf);
|
|
}
|
|
}
|
|
|
|
if (hso_dev->usb->state != USB_STATE_CONFIGURED)
|
|
return -EAGAIN;
|
|
|
|
usb_mark_last_busy(hso_dev->usb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hso_put_activity(struct hso_device *hso_dev)
|
|
{
|
|
if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
|
|
if (hso_dev->is_active) {
|
|
hso_dev->is_active = 0;
|
|
schedule_work(&hso_dev->async_put_intf);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
hso_dev->is_active = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* called by kernel when we need to suspend device */
|
|
static int hso_suspend(struct usb_interface *iface, pm_message_t message)
|
|
{
|
|
int i, result;
|
|
|
|
/* Stop all serial ports */
|
|
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
|
|
if (serial_table[i] && (serial_table[i]->interface == iface)) {
|
|
result = hso_stop_serial_device(serial_table[i]);
|
|
if (result)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Stop all network ports */
|
|
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
|
|
if (network_table[i] &&
|
|
(network_table[i]->interface == iface)) {
|
|
result = hso_stop_net_device(network_table[i]);
|
|
if (result)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
/* called by kernel when we need to resume device */
|
|
static int hso_resume(struct usb_interface *iface)
|
|
{
|
|
int i, result = 0;
|
|
struct hso_net *hso_net;
|
|
|
|
/* Start all serial ports */
|
|
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
|
|
if (serial_table[i] && (serial_table[i]->interface == iface)) {
|
|
if (dev2ser(serial_table[i])->open_count) {
|
|
result =
|
|
hso_start_serial_device(serial_table[i], GFP_NOIO);
|
|
hso_kick_transmit(dev2ser(serial_table[i]));
|
|
if (result)
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Start all network ports */
|
|
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
|
|
if (network_table[i] &&
|
|
(network_table[i]->interface == iface)) {
|
|
hso_net = dev2net(network_table[i]);
|
|
if (hso_net->flags & IFF_UP) {
|
|
/* First transmit any lingering data,
|
|
then restart the device. */
|
|
if (hso_net->skb_tx_buf) {
|
|
dev_dbg(&iface->dev,
|
|
"Transmitting"
|
|
" lingering data\n");
|
|
hso_net_start_xmit(hso_net->skb_tx_buf,
|
|
hso_net->net);
|
|
hso_net->skb_tx_buf = NULL;
|
|
}
|
|
result = hso_start_net_device(network_table[i]);
|
|
if (result)
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
static void hso_serial_ref_free(struct kref *ref)
|
|
{
|
|
struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
|
|
|
|
hso_free_serial_device(hso_dev);
|
|
}
|
|
|
|
static void hso_free_interface(struct usb_interface *interface)
|
|
{
|
|
struct hso_serial *hso_dev;
|
|
struct tty_struct *tty;
|
|
int i;
|
|
|
|
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
|
|
if (serial_table[i]
|
|
&& (serial_table[i]->interface == interface)) {
|
|
hso_dev = dev2ser(serial_table[i]);
|
|
spin_lock_irq(&hso_dev->serial_lock);
|
|
tty = tty_kref_get(hso_dev->tty);
|
|
spin_unlock_irq(&hso_dev->serial_lock);
|
|
if (tty)
|
|
tty_hangup(tty);
|
|
mutex_lock(&hso_dev->parent->mutex);
|
|
tty_kref_put(tty);
|
|
hso_dev->parent->usb_gone = 1;
|
|
mutex_unlock(&hso_dev->parent->mutex);
|
|
kref_put(&serial_table[i]->ref, hso_serial_ref_free);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
|
|
if (network_table[i]
|
|
&& (network_table[i]->interface == interface)) {
|
|
struct rfkill *rfk = dev2net(network_table[i])->rfkill;
|
|
/* hso_stop_net_device doesn't stop the net queue since
|
|
* traffic needs to start it again when suspended */
|
|
netif_stop_queue(dev2net(network_table[i])->net);
|
|
hso_stop_net_device(network_table[i]);
|
|
cancel_work_sync(&network_table[i]->async_put_intf);
|
|
cancel_work_sync(&network_table[i]->async_get_intf);
|
|
if (rfk) {
|
|
rfkill_unregister(rfk);
|
|
rfkill_destroy(rfk);
|
|
}
|
|
hso_free_net_device(network_table[i]);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Helper functions */
|
|
|
|
/* Get the endpoint ! */
|
|
static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
|
|
int type, int dir)
|
|
{
|
|
int i;
|
|
struct usb_host_interface *iface = intf->cur_altsetting;
|
|
struct usb_endpoint_descriptor *endp;
|
|
|
|
for (i = 0; i < iface->desc.bNumEndpoints; i++) {
|
|
endp = &iface->endpoint[i].desc;
|
|
if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
|
|
(usb_endpoint_type(endp) == type))
|
|
return endp;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* Get the byte that describes which ports are enabled */
|
|
static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
|
|
{
|
|
int i;
|
|
struct usb_host_interface *iface = intf->cur_altsetting;
|
|
|
|
if (iface->extralen == 3) {
|
|
*ports = iface->extra[2];
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < iface->desc.bNumEndpoints; i++) {
|
|
if (iface->endpoint[i].extralen == 3) {
|
|
*ports = iface->endpoint[i].extra[2];
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/* interrupt urb needs to be submitted, used for serial read of muxed port */
|
|
static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
|
|
struct usb_device *usb, gfp_t gfp)
|
|
{
|
|
int result;
|
|
|
|
usb_fill_int_urb(shared_int->shared_intr_urb, usb,
|
|
usb_rcvintpipe(usb,
|
|
shared_int->intr_endp->bEndpointAddress & 0x7F),
|
|
shared_int->shared_intr_buf,
|
|
shared_int->intr_endp->wMaxPacketSize,
|
|
intr_callback, shared_int,
|
|
shared_int->intr_endp->bInterval);
|
|
|
|
result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
|
|
if (result)
|
|
dev_warn(&usb->dev, "%s failed mux_intr_urb %d", __func__,
|
|
result);
|
|
|
|
return result;
|
|
}
|
|
|
|
/* operations setup of the serial interface */
|
|
static const struct tty_operations hso_serial_ops = {
|
|
.open = hso_serial_open,
|
|
.close = hso_serial_close,
|
|
.write = hso_serial_write,
|
|
.write_room = hso_serial_write_room,
|
|
.ioctl = hso_serial_ioctl,
|
|
.set_termios = hso_serial_set_termios,
|
|
.chars_in_buffer = hso_serial_chars_in_buffer,
|
|
.tiocmget = hso_serial_tiocmget,
|
|
.tiocmset = hso_serial_tiocmset,
|
|
.unthrottle = hso_unthrottle
|
|
};
|
|
|
|
static struct usb_driver hso_driver = {
|
|
.name = driver_name,
|
|
.probe = hso_probe,
|
|
.disconnect = hso_disconnect,
|
|
.id_table = hso_ids,
|
|
.suspend = hso_suspend,
|
|
.resume = hso_resume,
|
|
.reset_resume = hso_resume,
|
|
.supports_autosuspend = 1,
|
|
};
|
|
|
|
static int __init hso_init(void)
|
|
{
|
|
int i;
|
|
int result;
|
|
|
|
/* put it in the log */
|
|
printk(KERN_INFO "hso: %s\n", version);
|
|
|
|
/* Initialise the serial table semaphore and table */
|
|
spin_lock_init(&serial_table_lock);
|
|
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
|
|
serial_table[i] = NULL;
|
|
|
|
/* allocate our driver using the proper amount of supported minors */
|
|
tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
|
|
if (!tty_drv)
|
|
return -ENOMEM;
|
|
|
|
/* fill in all needed values */
|
|
tty_drv->magic = TTY_DRIVER_MAGIC;
|
|
tty_drv->owner = THIS_MODULE;
|
|
tty_drv->driver_name = driver_name;
|
|
tty_drv->name = tty_filename;
|
|
|
|
/* if major number is provided as parameter, use that one */
|
|
if (tty_major)
|
|
tty_drv->major = tty_major;
|
|
|
|
tty_drv->minor_start = 0;
|
|
tty_drv->num = HSO_SERIAL_TTY_MINORS;
|
|
tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
|
|
tty_drv->subtype = SERIAL_TYPE_NORMAL;
|
|
tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
|
|
tty_drv->init_termios = tty_std_termios;
|
|
hso_init_termios(&tty_drv->init_termios);
|
|
tty_set_operations(tty_drv, &hso_serial_ops);
|
|
|
|
/* register the tty driver */
|
|
result = tty_register_driver(tty_drv);
|
|
if (result) {
|
|
printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
|
|
__func__, result);
|
|
return result;
|
|
}
|
|
|
|
/* register this module as an usb driver */
|
|
result = usb_register(&hso_driver);
|
|
if (result) {
|
|
printk(KERN_ERR "Could not register hso driver? error: %d\n",
|
|
result);
|
|
/* cleanup serial interface */
|
|
tty_unregister_driver(tty_drv);
|
|
return result;
|
|
}
|
|
|
|
/* done */
|
|
return 0;
|
|
}
|
|
|
|
static void __exit hso_exit(void)
|
|
{
|
|
printk(KERN_INFO "hso: unloaded\n");
|
|
|
|
tty_unregister_driver(tty_drv);
|
|
/* deregister the usb driver */
|
|
usb_deregister(&hso_driver);
|
|
}
|
|
|
|
/* Module definitions */
|
|
module_init(hso_init);
|
|
module_exit(hso_exit);
|
|
|
|
MODULE_AUTHOR(MOD_AUTHOR);
|
|
MODULE_DESCRIPTION(MOD_DESCRIPTION);
|
|
MODULE_LICENSE(MOD_LICENSE);
|
|
MODULE_INFO(Version, DRIVER_VERSION);
|
|
|
|
/* change the debug level (eg: insmod hso.ko debug=0x04) */
|
|
MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
|
|
module_param(debug, int, S_IRUGO | S_IWUSR);
|
|
|
|
/* set the major tty number (eg: insmod hso.ko tty_major=245) */
|
|
MODULE_PARM_DESC(tty_major, "Set the major tty number");
|
|
module_param(tty_major, int, S_IRUGO | S_IWUSR);
|
|
|
|
/* disable network interface (eg: insmod hso.ko disable_net=1) */
|
|
MODULE_PARM_DESC(disable_net, "Disable the network interface");
|
|
module_param(disable_net, int, S_IRUGO | S_IWUSR);
|