548264375b
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
369 lines
10 KiB
C
369 lines
10 KiB
C
/*
|
|
* STV0680 USB Camera Driver
|
|
*
|
|
* Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* This module is adapted from the in kernel v4l1 stv680 driver:
|
|
*
|
|
* STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net)
|
|
*
|
|
* Thanks to STMicroelectronics for information on the usb commands, and
|
|
* to Steve Miller at STM for his help and encouragement while I was
|
|
* writing this driver.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#define MODULE_NAME "stv0680"
|
|
|
|
#include "gspca.h"
|
|
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("STV0680 USB Camera Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* specific webcam descriptor */
|
|
struct sd {
|
|
struct gspca_dev gspca_dev; /* !! must be the first item */
|
|
struct v4l2_pix_format mode;
|
|
u8 orig_mode;
|
|
u8 video_mode;
|
|
u8 current_mode;
|
|
};
|
|
|
|
/* V4L2 controls supported by the driver */
|
|
static const struct ctrl sd_ctrls[] = {
|
|
};
|
|
|
|
static int stv_sndctrl(struct gspca_dev *gspca_dev, int set, u8 req, u16 val,
|
|
int size)
|
|
{
|
|
int ret = -1;
|
|
u8 req_type = 0;
|
|
unsigned int pipe = 0;
|
|
|
|
switch (set) {
|
|
case 0: /* 0xc1 */
|
|
req_type = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
|
|
pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
|
|
break;
|
|
case 1: /* 0x41 */
|
|
req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
|
|
pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
|
|
break;
|
|
case 2: /* 0x80 */
|
|
req_type = USB_DIR_IN | USB_RECIP_DEVICE;
|
|
pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
|
|
break;
|
|
case 3: /* 0x40 */
|
|
req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
|
|
pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
|
|
break;
|
|
}
|
|
|
|
ret = usb_control_msg(gspca_dev->dev, pipe,
|
|
req, req_type,
|
|
val, 0, gspca_dev->usb_buf, size, 500);
|
|
|
|
if ((ret < 0) && (req != 0x0a))
|
|
PDEBUG(D_ERR,
|
|
"usb_control_msg error %i, request = 0x%x, error = %i",
|
|
set, req, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stv0680_handle_error(struct gspca_dev *gspca_dev, int ret)
|
|
{
|
|
stv_sndctrl(gspca_dev, 0, 0x80, 0, 0x02); /* Get Last Error */
|
|
PDEBUG(D_ERR, "last error: %i, command = 0x%x",
|
|
gspca_dev->usb_buf[0], gspca_dev->usb_buf[1]);
|
|
return ret;
|
|
}
|
|
|
|
static int stv0680_get_video_mode(struct gspca_dev *gspca_dev)
|
|
{
|
|
/* Note not sure if this init of usb_buf is really necessary */
|
|
memset(gspca_dev->usb_buf, 0, 8);
|
|
gspca_dev->usb_buf[0] = 0x0f;
|
|
|
|
if (stv_sndctrl(gspca_dev, 0, 0x87, 0, 0x08) != 0x08) {
|
|
PDEBUG(D_ERR, "Get_Camera_Mode failed");
|
|
return stv0680_handle_error(gspca_dev, -EIO);
|
|
}
|
|
|
|
return gspca_dev->usb_buf[0]; /* 01 = VGA, 03 = QVGA, 00 = CIF */
|
|
}
|
|
|
|
static int stv0680_set_video_mode(struct gspca_dev *gspca_dev, u8 mode)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
if (sd->current_mode == mode)
|
|
return 0;
|
|
|
|
memset(gspca_dev->usb_buf, 0, 8);
|
|
gspca_dev->usb_buf[0] = mode;
|
|
|
|
if (stv_sndctrl(gspca_dev, 3, 0x07, 0x0100, 0x08) != 0x08) {
|
|
PDEBUG(D_ERR, "Set_Camera_Mode failed");
|
|
return stv0680_handle_error(gspca_dev, -EIO);
|
|
}
|
|
|
|
/* Verify we got what we've asked for */
|
|
if (stv0680_get_video_mode(gspca_dev) != mode) {
|
|
PDEBUG(D_ERR, "Error setting camera video mode!");
|
|
return -EIO;
|
|
}
|
|
|
|
sd->current_mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* this function is called at probe time */
|
|
static int sd_config(struct gspca_dev *gspca_dev,
|
|
const struct usb_device_id *id)
|
|
{
|
|
int ret;
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
struct cam *cam = &gspca_dev->cam;
|
|
|
|
/* Give the camera some time to settle, otherwise initalization will
|
|
fail on hotplug, and yes it really needs a full second. */
|
|
msleep(1000);
|
|
|
|
/* ping camera to be sure STV0680 is present */
|
|
if (stv_sndctrl(gspca_dev, 0, 0x88, 0x5678, 0x02) != 0x02 ||
|
|
gspca_dev->usb_buf[0] != 0x56 || gspca_dev->usb_buf[1] != 0x78) {
|
|
PDEBUG(D_ERR, "STV(e): camera ping failed!!");
|
|
return stv0680_handle_error(gspca_dev, -ENODEV);
|
|
}
|
|
|
|
/* get camera descriptor */
|
|
if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0200, 0x09) != 0x09)
|
|
return stv0680_handle_error(gspca_dev, -ENODEV);
|
|
|
|
if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0200, 0x22) != 0x22 ||
|
|
gspca_dev->usb_buf[7] != 0xa0 || gspca_dev->usb_buf[8] != 0x23) {
|
|
PDEBUG(D_ERR, "Could not get descriptor 0200.");
|
|
return stv0680_handle_error(gspca_dev, -ENODEV);
|
|
}
|
|
if (stv_sndctrl(gspca_dev, 0, 0x8a, 0, 0x02) != 0x02)
|
|
return stv0680_handle_error(gspca_dev, -ENODEV);
|
|
if (stv_sndctrl(gspca_dev, 0, 0x8b, 0, 0x24) != 0x24)
|
|
return stv0680_handle_error(gspca_dev, -ENODEV);
|
|
if (stv_sndctrl(gspca_dev, 0, 0x85, 0, 0x10) != 0x10)
|
|
return stv0680_handle_error(gspca_dev, -ENODEV);
|
|
|
|
if (!(gspca_dev->usb_buf[7] & 0x09)) {
|
|
PDEBUG(D_ERR, "Camera supports neither CIF nor QVGA mode");
|
|
return -ENODEV;
|
|
}
|
|
if (gspca_dev->usb_buf[7] & 0x01)
|
|
PDEBUG(D_PROBE, "Camera supports CIF mode");
|
|
if (gspca_dev->usb_buf[7] & 0x02)
|
|
PDEBUG(D_PROBE, "Camera supports VGA mode");
|
|
if (gspca_dev->usb_buf[7] & 0x04)
|
|
PDEBUG(D_PROBE, "Camera supports QCIF mode");
|
|
if (gspca_dev->usb_buf[7] & 0x08)
|
|
PDEBUG(D_PROBE, "Camera supports QVGA mode");
|
|
|
|
if (gspca_dev->usb_buf[7] & 0x01)
|
|
sd->video_mode = 0x00; /* CIF */
|
|
else
|
|
sd->video_mode = 0x03; /* QVGA */
|
|
|
|
/* FW rev, ASIC rev, sensor ID */
|
|
PDEBUG(D_PROBE, "Firmware rev is %i.%i",
|
|
gspca_dev->usb_buf[0], gspca_dev->usb_buf[1]);
|
|
PDEBUG(D_PROBE, "ASIC rev is %i.%i",
|
|
gspca_dev->usb_buf[2], gspca_dev->usb_buf[3]);
|
|
PDEBUG(D_PROBE, "Sensor ID is %i",
|
|
(gspca_dev->usb_buf[4]*16) + (gspca_dev->usb_buf[5]>>4));
|
|
|
|
|
|
ret = stv0680_get_video_mode(gspca_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
sd->current_mode = sd->orig_mode = ret;
|
|
|
|
ret = stv0680_set_video_mode(gspca_dev, sd->video_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Get mode details */
|
|
if (stv_sndctrl(gspca_dev, 0, 0x8f, 0, 0x10) != 0x10)
|
|
return stv0680_handle_error(gspca_dev, -EIO);
|
|
|
|
cam->bulk = 1;
|
|
cam->bulk_nurbs = 1; /* The cam cannot handle more */
|
|
cam->bulk_size = (gspca_dev->usb_buf[0] << 24) |
|
|
(gspca_dev->usb_buf[1] << 16) |
|
|
(gspca_dev->usb_buf[2] << 8) |
|
|
(gspca_dev->usb_buf[3]);
|
|
sd->mode.width = (gspca_dev->usb_buf[4] << 8) |
|
|
(gspca_dev->usb_buf[5]); /* 322, 356, 644 */
|
|
sd->mode.height = (gspca_dev->usb_buf[6] << 8) |
|
|
(gspca_dev->usb_buf[7]); /* 242, 292, 484 */
|
|
sd->mode.pixelformat = V4L2_PIX_FMT_STV0680;
|
|
sd->mode.field = V4L2_FIELD_NONE;
|
|
sd->mode.bytesperline = sd->mode.width;
|
|
sd->mode.sizeimage = cam->bulk_size;
|
|
sd->mode.colorspace = V4L2_COLORSPACE_SRGB;
|
|
|
|
/* origGain = gspca_dev->usb_buf[12]; */
|
|
|
|
cam->cam_mode = &sd->mode;
|
|
cam->nmodes = 1;
|
|
|
|
|
|
ret = stv0680_set_video_mode(gspca_dev, sd->orig_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0100, 0x12) != 0x12 ||
|
|
gspca_dev->usb_buf[8] != 0x53 || gspca_dev->usb_buf[9] != 0x05) {
|
|
PDEBUG(D_ERR, "Could not get descriptor 0100.");
|
|
return stv0680_handle_error(gspca_dev, -EIO);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* this function is called at probe and resume time */
|
|
static int sd_init(struct gspca_dev *gspca_dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* -- start the camera -- */
|
|
static int sd_start(struct gspca_dev *gspca_dev)
|
|
{
|
|
int ret;
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
ret = stv0680_set_video_mode(gspca_dev, sd->video_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (stv_sndctrl(gspca_dev, 0, 0x85, 0, 0x10) != 0x10)
|
|
return stv0680_handle_error(gspca_dev, -EIO);
|
|
|
|
/* Start stream at:
|
|
0x0000 = CIF (352x288)
|
|
0x0100 = VGA (640x480)
|
|
0x0300 = QVGA (320x240) */
|
|
if (stv_sndctrl(gspca_dev, 1, 0x09, sd->video_mode << 8, 0x0) != 0x0)
|
|
return stv0680_handle_error(gspca_dev, -EIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sd_stopN(struct gspca_dev *gspca_dev)
|
|
{
|
|
/* This is a high priority command; it stops all lower order cmds */
|
|
if (stv_sndctrl(gspca_dev, 1, 0x04, 0x0000, 0x0) != 0x0)
|
|
stv0680_handle_error(gspca_dev, -EIO);
|
|
}
|
|
|
|
static void sd_stop0(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
if (!sd->gspca_dev.present)
|
|
return;
|
|
|
|
stv0680_set_video_mode(gspca_dev, sd->orig_mode);
|
|
}
|
|
|
|
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
|
|
u8 *data,
|
|
int len)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
/* Every now and then the camera sends a 16 byte packet, no idea
|
|
what it contains, but it is not image data, when this
|
|
happens the frame received before this packet is corrupt,
|
|
so discard it. */
|
|
if (len != sd->mode.sizeimage) {
|
|
gspca_dev->last_packet_type = DISCARD_PACKET;
|
|
return;
|
|
}
|
|
|
|
/* Finish the previous frame, we do this upon reception of the next
|
|
packet, even though it is already complete so that the strange 16
|
|
byte packets send after a corrupt frame can discard it. */
|
|
gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
|
|
|
|
/* Store the just received frame */
|
|
gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
|
|
}
|
|
|
|
/* sub-driver description */
|
|
static const struct sd_desc sd_desc = {
|
|
.name = MODULE_NAME,
|
|
.ctrls = sd_ctrls,
|
|
.nctrls = ARRAY_SIZE(sd_ctrls),
|
|
.config = sd_config,
|
|
.init = sd_init,
|
|
.start = sd_start,
|
|
.stopN = sd_stopN,
|
|
.stop0 = sd_stop0,
|
|
.pkt_scan = sd_pkt_scan,
|
|
};
|
|
|
|
/* -- module initialisation -- */
|
|
static const __devinitdata struct usb_device_id device_table[] = {
|
|
{USB_DEVICE(0x0553, 0x0202)},
|
|
{USB_DEVICE(0x041e, 0x4007)},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, device_table);
|
|
|
|
/* -- device connect -- */
|
|
static int sd_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
|
|
THIS_MODULE);
|
|
}
|
|
|
|
static struct usb_driver sd_driver = {
|
|
.name = MODULE_NAME,
|
|
.id_table = device_table,
|
|
.probe = sd_probe,
|
|
.disconnect = gspca_disconnect,
|
|
#ifdef CONFIG_PM
|
|
.suspend = gspca_suspend,
|
|
.resume = gspca_resume,
|
|
#endif
|
|
};
|
|
|
|
/* -- module insert / remove -- */
|
|
static int __init sd_mod_init(void)
|
|
{
|
|
return usb_register(&sd_driver);
|
|
}
|
|
static void __exit sd_mod_exit(void)
|
|
{
|
|
usb_deregister(&sd_driver);
|
|
}
|
|
|
|
module_init(sd_mod_init);
|
|
module_exit(sd_mod_exit);
|