android_kernel_xiaomi_sm8350/include/asm-mips/cobalt/cobalt.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

91 lines
2.8 KiB
C

/*
* Lowlevel hardware stuff for the MIPS based Cobalt microservers.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1997 Cobalt Microserver
* Copyright (C) 1997, 2003 Ralf Baechle
* Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
*/
#ifndef __ASM_COBALT_H
#define __ASM_COBALT_H
/*
* i8259 legacy interrupts used on Cobalt:
*
* 8 - RTC
* 9 - PCI
* 14 - IDE0
* 15 - IDE1
*
* CPU IRQs are 16 ... 23
*/
#define COBALT_TIMER_IRQ 18
#define COBALT_SCC_IRQ 19 /* pre-production has 85C30 */
#define COBALT_RAQ_SCSI_IRQ 19
#define COBALT_ETH0_IRQ 19
#define COBALT_ETH1_IRQ 20
#define COBALT_SERIAL_IRQ 21
#define COBALT_SCSI_IRQ 21
#define COBALT_VIA_IRQ 22 /* Chained to VIA ISA bridge */
#define COBALT_QUBE_SLOT_IRQ 23
/*
* PCI configuration space manifest constants. These are wired into
* the board layout according to the PCI spec to enable the software
* to probe the hardware configuration space in a well defined manner.
*
* The PCI_DEVSHFT() macro transforms these values into numbers
* suitable for passing as the dev parameter to the various
* pcibios_read/write_config routines.
*/
#define COBALT_PCICONF_CPU 0x06
#define COBALT_PCICONF_ETH0 0x07
#define COBALT_PCICONF_RAQSCSI 0x08
#define COBALT_PCICONF_VIA 0x09
#define COBALT_PCICONF_PCISLOT 0x0A
#define COBALT_PCICONF_ETH1 0x0C
/*
* The Cobalt board id information. The boards have an ID number wired
* into the VIA that is available in the high nibble of register 94.
* This register is available in the VIA configuration space through the
* interface routines qube_pcibios_read/write_config. See cobalt/pci.c
*/
#define VIA_COBALT_BRD_ID_REG 0x94
#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4)
#define COBALT_BRD_ID_QUBE1 0x3
#define COBALT_BRD_ID_RAQ1 0x4
#define COBALT_BRD_ID_QUBE2 0x5
#define COBALT_BRD_ID_RAQ2 0x6
/*
* Galileo chipset access macros for the Cobalt. The base address for
* the GT64111 chip is 0x14000000
*
* Most of this really should go into a separate GT64111 header file.
*/
#define GT64111_IO_BASE 0x10000000UL
#define GT64111_BASE 0x14000000UL
#define GALILEO_REG(ofs) (KSEG0 + GT64111_BASE + (unsigned long)(ofs))
#define GALILEO_INL(port) (*(volatile unsigned int *) GALILEO_REG(port))
#define GALILEO_OUTL(val, port) \
do { \
*(volatile unsigned int *) GALILEO_REG(port) = (port); \
} while (0)
#define GALILEO_T0EXP 0x0100
#define GALILEO_ENTC0 0x01
#define GALILEO_SELTC0 0x02
#define PCI_CFG_SET(devfn,where) \
GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) | \
(PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS)
#endif /* __ASM_COBALT_H */