2142babac9
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail davinci: DM644x: NAND: update partitioning davinci: update DM644x support in preparation for more SoCs davinci: DM644x: rename board file davinci: update pin-multiplexing support davinci: serial: generalize for more SoCs davinci: DM355 IRQ Definitions davinci: DM646x: add interrupt number and priorities davinci: PSC: Clear bits in MDCTL reg before setting new bits davinci: gpio bugfixes davinci: add EDMA driver davinci: timers: use clk_get_rate() [ARM] pxa/littleton: add missing da9034 touchscreen support [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol ...
293 lines
7.0 KiB
ArmAsm
293 lines
7.0 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/proc-v7.S
|
|
*
|
|
* Copyright (C) 2001 Deep Blue Solutions Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This is the "shell" of the ARMv7 processor support.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
#define TTB_C (1 << 0)
|
|
#define TTB_S (1 << 1)
|
|
#define TTB_RGN_NC (0 << 3)
|
|
#define TTB_RGN_OC_WBWA (1 << 3)
|
|
#define TTB_RGN_OC_WT (2 << 3)
|
|
#define TTB_RGN_OC_WB (3 << 3)
|
|
|
|
#ifndef CONFIG_SMP
|
|
#define TTB_FLAGS TTB_C|TTB_RGN_OC_WB @ mark PTWs cacheable, outer WB
|
|
#else
|
|
#define TTB_FLAGS TTB_C|TTB_S|TTB_RGN_OC_WBWA @ mark PTWs cacheable and shared, outer WBWA
|
|
#endif
|
|
|
|
ENTRY(cpu_v7_proc_init)
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_proc_init)
|
|
|
|
ENTRY(cpu_v7_proc_fin)
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_proc_fin)
|
|
|
|
/*
|
|
* cpu_v7_reset(loc)
|
|
*
|
|
* Perform a soft reset of the system. Put the CPU into the
|
|
* same state as it would be if it had been reset, and branch
|
|
* to what would be the reset vector.
|
|
*
|
|
* - loc - location to jump to for soft reset
|
|
*
|
|
* It is assumed that:
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_v7_reset)
|
|
mov pc, r0
|
|
ENDPROC(cpu_v7_reset)
|
|
|
|
/*
|
|
* cpu_v7_do_idle()
|
|
*
|
|
* Idle the processor (eg, wait for interrupt).
|
|
*
|
|
* IRQs are already disabled.
|
|
*/
|
|
ENTRY(cpu_v7_do_idle)
|
|
dsb @ WFI may enter a low-power mode
|
|
wfi
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_do_idle)
|
|
|
|
ENTRY(cpu_v7_dcache_clean_area)
|
|
#ifndef TLB_CAN_READ_FROM_L1_CACHE
|
|
dcache_line_size r2, r3
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, r2
|
|
subs r1, r1, r2
|
|
bhi 1b
|
|
dsb
|
|
#endif
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_dcache_clean_area)
|
|
|
|
/*
|
|
* cpu_v7_switch_mm(pgd_phys, tsk)
|
|
*
|
|
* Set the translation table base pointer to be pgd_phys
|
|
*
|
|
* - pgd_phys - physical address of new TTB
|
|
*
|
|
* It is assumed that:
|
|
* - we are not using split page tables
|
|
*/
|
|
ENTRY(cpu_v7_switch_mm)
|
|
#ifdef CONFIG_MMU
|
|
mov r2, #0
|
|
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
|
|
orr r0, r0, #TTB_FLAGS
|
|
#ifdef CONFIG_ARM_ERRATA_430973
|
|
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
|
|
#endif
|
|
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
|
|
isb
|
|
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
|
|
isb
|
|
mcr p15, 0, r1, c13, c0, 1 @ set context ID
|
|
isb
|
|
#endif
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_switch_mm)
|
|
|
|
/*
|
|
* cpu_v7_set_pte_ext(ptep, pte)
|
|
*
|
|
* Set a level 2 translation table entry.
|
|
*
|
|
* - ptep - pointer to level 2 translation table entry
|
|
* (hardware version is stored at -1024 bytes)
|
|
* - pte - PTE value to store
|
|
* - ext - value for extended PTE bits
|
|
*/
|
|
ENTRY(cpu_v7_set_pte_ext)
|
|
#ifdef CONFIG_MMU
|
|
str r1, [r0], #-2048 @ linux version
|
|
|
|
bic r3, r1, #0x000003f0
|
|
bic r3, r3, #PTE_TYPE_MASK
|
|
orr r3, r3, r2
|
|
orr r3, r3, #PTE_EXT_AP0 | 2
|
|
|
|
tst r1, #1 << 4
|
|
orrne r3, r3, #PTE_EXT_TEX(1)
|
|
|
|
tst r1, #L_PTE_WRITE
|
|
tstne r1, #L_PTE_DIRTY
|
|
orreq r3, r3, #PTE_EXT_APX
|
|
|
|
tst r1, #L_PTE_USER
|
|
orrne r3, r3, #PTE_EXT_AP1
|
|
tstne r3, #PTE_EXT_APX
|
|
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
|
|
|
|
tst r1, #L_PTE_EXEC
|
|
orreq r3, r3, #PTE_EXT_XN
|
|
|
|
tst r1, #L_PTE_YOUNG
|
|
tstne r1, #L_PTE_PRESENT
|
|
moveq r3, #0
|
|
|
|
str r3, [r0]
|
|
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
|
|
#endif
|
|
mov pc, lr
|
|
ENDPROC(cpu_v7_set_pte_ext)
|
|
|
|
cpu_v7_name:
|
|
.ascii "ARMv7 Processor"
|
|
.align
|
|
|
|
__INIT
|
|
|
|
/*
|
|
* __v7_setup
|
|
*
|
|
* Initialise TLB, Caches, and MMU state ready to switch the MMU
|
|
* on. Return in r0 the new CP15 C1 control register setting.
|
|
*
|
|
* We automatically detect if we have a Harvard cache, and use the
|
|
* Harvard cache control instructions insead of the unified cache
|
|
* control instructions.
|
|
*
|
|
* This should be able to cover all ARMv7 cores.
|
|
*
|
|
* It is assumed that:
|
|
* - cache type register is implemented
|
|
*/
|
|
__v7_setup:
|
|
#ifdef CONFIG_SMP
|
|
mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode
|
|
orr r0, r0, #(0x1 << 6)
|
|
mcr p15, 0, r0, c1, c0, 1
|
|
#endif
|
|
adr r12, __v7_setup_stack @ the local stack
|
|
stmia r12, {r0-r5, r7, r9, r11, lr}
|
|
bl v7_flush_dcache_all
|
|
ldmia r12, {r0-r5, r7, r9, r11, lr}
|
|
#ifdef CONFIG_ARM_ERRATA_430973
|
|
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
|
|
orr r10, r10, #(1 << 6) @ set IBE to 1
|
|
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
|
|
#endif
|
|
#ifdef CONFIG_ARM_ERRATA_458693
|
|
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
|
|
orr r10, r10, #(1 << 5) @ set L1NEON to 1
|
|
orr r10, r10, #(1 << 9) @ set PLDNOP to 1
|
|
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
|
|
#endif
|
|
#ifdef CONFIG_ARM_ERRATA_460075
|
|
mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
|
|
orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
|
|
mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
|
|
#endif
|
|
mov r10, #0
|
|
#ifdef HARVARD_CACHE
|
|
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
|
|
#endif
|
|
dsb
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
|
|
mcr p15, 0, r10, c2, c0, 2 @ TTB control register
|
|
orr r4, r4, #TTB_FLAGS
|
|
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
|
|
mov r10, #0x1f @ domains 0, 1 = manager
|
|
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
|
|
#endif
|
|
ldr r5, =0xff0aa1a8
|
|
ldr r6, =0x40e040e0
|
|
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
|
|
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
|
|
adr r5, v7_crval
|
|
ldmia r5, {r5, r6}
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control register
|
|
bic r0, r0, r5 @ clear bits them
|
|
orr r0, r0, r6 @ set them
|
|
mov pc, lr @ return to head.S:__ret
|
|
ENDPROC(__v7_setup)
|
|
|
|
/* AT
|
|
* TFR EV X F I D LR
|
|
* .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
|
|
* rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
|
|
* 1 0 110 0011 1.00 .111 1101 < we want
|
|
*/
|
|
.type v7_crval, #object
|
|
v7_crval:
|
|
crval clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
|
|
|
|
__v7_setup_stack:
|
|
.space 4 * 11 @ 11 registers
|
|
|
|
.type v7_processor_functions, #object
|
|
ENTRY(v7_processor_functions)
|
|
.word v7_early_abort
|
|
.word pabort_ifar
|
|
.word cpu_v7_proc_init
|
|
.word cpu_v7_proc_fin
|
|
.word cpu_v7_reset
|
|
.word cpu_v7_do_idle
|
|
.word cpu_v7_dcache_clean_area
|
|
.word cpu_v7_switch_mm
|
|
.word cpu_v7_set_pte_ext
|
|
.size v7_processor_functions, . - v7_processor_functions
|
|
|
|
.type cpu_arch_name, #object
|
|
cpu_arch_name:
|
|
.asciz "armv7"
|
|
.size cpu_arch_name, . - cpu_arch_name
|
|
|
|
.type cpu_elf_name, #object
|
|
cpu_elf_name:
|
|
.asciz "v7"
|
|
.size cpu_elf_name, . - cpu_elf_name
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
|
|
/*
|
|
* Match any ARMv7 processor core.
|
|
*/
|
|
.type __v7_proc_info, #object
|
|
__v7_proc_info:
|
|
.long 0x000f0000 @ Required ID value
|
|
.long 0x000f0000 @ Mask for ID
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_BUFFERABLE | \
|
|
PMD_SECT_CACHEABLE | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_XN | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
b __v7_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
|
|
.long cpu_v7_name
|
|
.long v7_processor_functions
|
|
.long v7wbi_tlb_fns
|
|
.long v6_user_fns
|
|
.long v7_cache_fns
|
|
.size __v7_proc_info, . - __v7_proc_info
|