552d920518
The _board_ driver needs to be mtd->owner, and it in turn pins the nand.ko module. Fix them all to actually do that, and fix nand.ko not to overwrite it -- and also to check that the caller sets it, if the caller is a module. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
419 lines
12 KiB
C
419 lines
12 KiB
C
/*
|
|
* drivers/mtd/nand/ppchameleonevb.c
|
|
*
|
|
* Copyright (C) 2003 DAVE Srl (info@wawnet.biz)
|
|
*
|
|
* Derived from drivers/mtd/nand/edb7312.c
|
|
*
|
|
*
|
|
* $Id: ppchameleonevb.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Overview:
|
|
* This is a device driver for the NAND flash devices found on the
|
|
* PPChameleon/PPChameleonEVB system.
|
|
* PPChameleon options (autodetected):
|
|
* - BA model: no NAND
|
|
* - ME model: 32MB (Samsung K9F5608U0B)
|
|
* - HI model: 128MB (Samsung K9F1G08UOM)
|
|
* PPChameleonEVB options:
|
|
* - 32MB (Samsung K9F5608U0B)
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <asm/io.h>
|
|
#include <platforms/PPChameleonEVB.h>
|
|
|
|
#undef USE_READY_BUSY_PIN
|
|
#define USE_READY_BUSY_PIN
|
|
/* see datasheets (tR) */
|
|
#define NAND_BIG_DELAY_US 25
|
|
#define NAND_SMALL_DELAY_US 10
|
|
|
|
/* handy sizes */
|
|
#define SZ_4M 0x00400000
|
|
#define NAND_SMALL_SIZE 0x02000000
|
|
#define NAND_MTD_NAME "ppchameleon-nand"
|
|
#define NAND_EVB_MTD_NAME "ppchameleonevb-nand"
|
|
|
|
/* GPIO pins used to drive NAND chip mounted on processor module */
|
|
#define NAND_nCE_GPIO_PIN (0x80000000 >> 1)
|
|
#define NAND_CLE_GPIO_PIN (0x80000000 >> 2)
|
|
#define NAND_ALE_GPIO_PIN (0x80000000 >> 3)
|
|
#define NAND_RB_GPIO_PIN (0x80000000 >> 4)
|
|
/* GPIO pins used to drive NAND chip mounted on EVB */
|
|
#define NAND_EVB_nCE_GPIO_PIN (0x80000000 >> 14)
|
|
#define NAND_EVB_CLE_GPIO_PIN (0x80000000 >> 15)
|
|
#define NAND_EVB_ALE_GPIO_PIN (0x80000000 >> 16)
|
|
#define NAND_EVB_RB_GPIO_PIN (0x80000000 >> 31)
|
|
|
|
/*
|
|
* MTD structure for PPChameleonEVB board
|
|
*/
|
|
static struct mtd_info *ppchameleon_mtd = NULL;
|
|
static struct mtd_info *ppchameleonevb_mtd = NULL;
|
|
|
|
/*
|
|
* Module stuff
|
|
*/
|
|
static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR;
|
|
static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
|
|
|
|
#ifdef MODULE
|
|
module_param(ppchameleon_fio_pbase, ulong, 0);
|
|
module_param(ppchameleonevb_fio_pbase, ulong, 0);
|
|
#else
|
|
__setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase);
|
|
__setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase);
|
|
#endif
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
/*
|
|
* Define static partitions for flash devices
|
|
*/
|
|
static struct mtd_partition partition_info_hi[] = {
|
|
{ .name = "PPChameleon HI Nand Flash",
|
|
offset = 0,
|
|
.size = 128 * 1024 * 1024
|
|
}
|
|
};
|
|
|
|
static struct mtd_partition partition_info_me[] = {
|
|
{ .name = "PPChameleon ME Nand Flash",
|
|
.offset = 0,
|
|
.size = 32 * 1024 * 1024
|
|
}
|
|
};
|
|
|
|
static struct mtd_partition partition_info_evb[] = {
|
|
{ .name = "PPChameleonEVB Nand Flash",
|
|
.offset = 0,
|
|
.size = 32 * 1024 * 1024
|
|
}
|
|
};
|
|
|
|
#define NUM_PARTITIONS 1
|
|
|
|
extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
|
|
#endif
|
|
|
|
/*
|
|
* hardware specific access to control-lines
|
|
*/
|
|
static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
|
|
case NAND_CTL_SETCLE:
|
|
MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
|
|
break;
|
|
case NAND_CTL_CLRCLE:
|
|
MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
|
|
break;
|
|
case NAND_CTL_SETALE:
|
|
MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
|
|
break;
|
|
case NAND_CTL_CLRALE:
|
|
MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
|
|
break;
|
|
case NAND_CTL_SETNCE:
|
|
MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
|
|
break;
|
|
case NAND_CTL_CLRNCE:
|
|
MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
|
|
case NAND_CTL_SETCLE:
|
|
MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
|
|
break;
|
|
case NAND_CTL_CLRCLE:
|
|
MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
|
|
break;
|
|
case NAND_CTL_SETALE:
|
|
MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
|
|
break;
|
|
case NAND_CTL_CLRALE:
|
|
MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
|
|
break;
|
|
case NAND_CTL_SETNCE:
|
|
MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
|
|
break;
|
|
case NAND_CTL_CLRNCE:
|
|
MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef USE_READY_BUSY_PIN
|
|
/*
|
|
* read device ready pin
|
|
*/
|
|
static int ppchameleon_device_ready(struct mtd_info *minfo)
|
|
{
|
|
if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static int ppchameleonevb_device_ready(struct mtd_info *minfo)
|
|
{
|
|
if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
const char *part_probes[] = { "cmdlinepart", NULL };
|
|
const char *part_probes_evb[] = { "cmdlinepart", NULL };
|
|
#endif
|
|
|
|
/*
|
|
* Main initialization routine
|
|
*/
|
|
static int __init ppchameleonevb_init(void)
|
|
{
|
|
struct nand_chip *this;
|
|
const char *part_type = 0;
|
|
int mtd_parts_nb = 0;
|
|
struct mtd_partition *mtd_parts = 0;
|
|
void __iomem *ppchameleon_fio_base;
|
|
void __iomem *ppchameleonevb_fio_base;
|
|
|
|
/*********************************
|
|
* Processor module NAND (if any) *
|
|
*********************************/
|
|
/* Allocate memory for MTD device structure and private data */
|
|
ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
|
|
if (!ppchameleon_mtd) {
|
|
printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* map physical address */
|
|
ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
|
|
if (!ppchameleon_fio_base) {
|
|
printk("ioremap PPChameleon NAND flash failed\n");
|
|
kfree(ppchameleon_mtd);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Get pointer to private data */
|
|
this = (struct nand_chip *)(&ppchameleon_mtd[1]);
|
|
|
|
/* Initialize structures */
|
|
memset(ppchameleon_mtd, 0, sizeof(struct mtd_info));
|
|
memset(this, 0, sizeof(struct nand_chip));
|
|
|
|
/* Link the private data with the MTD structure */
|
|
ppchameleon_mtd->priv = this;
|
|
ppchameleon_mtd->owner = THIS_MODULE;
|
|
|
|
/* Initialize GPIOs */
|
|
/* Pin mapping for NAND chip */
|
|
/*
|
|
CE GPIO_01
|
|
CLE GPIO_02
|
|
ALE GPIO_03
|
|
R/B GPIO_04
|
|
*/
|
|
/* output select */
|
|
out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF);
|
|
/* three-state select */
|
|
out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF);
|
|
/* enable output driver */
|
|
out_be32((volatile unsigned *)GPIO0_TCR,
|
|
in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
|
|
#ifdef USE_READY_BUSY_PIN
|
|
/* three-state select */
|
|
out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF);
|
|
/* high-impedecence */
|
|
out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
|
|
/* input select */
|
|
out_be32((volatile unsigned *)GPIO0_ISR1H,
|
|
(in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
|
|
#endif
|
|
|
|
/* insert callbacks */
|
|
this->IO_ADDR_R = ppchameleon_fio_base;
|
|
this->IO_ADDR_W = ppchameleon_fio_base;
|
|
this->hwcontrol = ppchameleon_hwcontrol;
|
|
#ifdef USE_READY_BUSY_PIN
|
|
this->dev_ready = ppchameleon_device_ready;
|
|
#endif
|
|
this->chip_delay = NAND_BIG_DELAY_US;
|
|
/* ECC mode */
|
|
this->eccmode = NAND_ECC_SOFT;
|
|
|
|
/* Scan to find existence of the device (it could not be mounted) */
|
|
if (nand_scan(ppchameleon_mtd, 1)) {
|
|
iounmap((void *)ppchameleon_fio_base);
|
|
kfree(ppchameleon_mtd);
|
|
goto nand_evb_init;
|
|
}
|
|
#ifndef USE_READY_BUSY_PIN
|
|
/* Adjust delay if necessary */
|
|
if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
|
|
this->chip_delay = NAND_SMALL_DELAY_US;
|
|
#endif
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
ppchameleon_mtd->name = "ppchameleon-nand";
|
|
mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
|
|
if (mtd_parts_nb > 0)
|
|
part_type = "command line";
|
|
else
|
|
mtd_parts_nb = 0;
|
|
#endif
|
|
if (mtd_parts_nb == 0) {
|
|
if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
|
|
mtd_parts = partition_info_me;
|
|
else
|
|
mtd_parts = partition_info_hi;
|
|
mtd_parts_nb = NUM_PARTITIONS;
|
|
part_type = "static";
|
|
}
|
|
|
|
/* Register the partitions */
|
|
printk(KERN_NOTICE "Using %s partition definition\n", part_type);
|
|
add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
|
|
|
|
nand_evb_init:
|
|
/****************************
|
|
* EVB NAND (always present) *
|
|
****************************/
|
|
/* Allocate memory for MTD device structure and private data */
|
|
ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
|
|
if (!ppchameleonevb_mtd) {
|
|
printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* map physical address */
|
|
ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
|
|
if (!ppchameleonevb_fio_base) {
|
|
printk("ioremap PPChameleonEVB NAND flash failed\n");
|
|
kfree(ppchameleonevb_mtd);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Get pointer to private data */
|
|
this = (struct nand_chip *)(&ppchameleonevb_mtd[1]);
|
|
|
|
/* Initialize structures */
|
|
memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
|
|
memset(this, 0, sizeof(struct nand_chip));
|
|
|
|
/* Link the private data with the MTD structure */
|
|
ppchameleonevb_mtd->priv = this;
|
|
|
|
/* Initialize GPIOs */
|
|
/* Pin mapping for NAND chip */
|
|
/*
|
|
CE GPIO_14
|
|
CLE GPIO_15
|
|
ALE GPIO_16
|
|
R/B GPIO_31
|
|
*/
|
|
/* output select */
|
|
out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0);
|
|
out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF);
|
|
/* three-state select */
|
|
out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0);
|
|
out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF);
|
|
/* enable output driver */
|
|
out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN |
|
|
NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
|
|
#ifdef USE_READY_BUSY_PIN
|
|
/* three-state select */
|
|
out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC);
|
|
/* high-impedecence */
|
|
out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
|
|
/* input select */
|
|
out_be32((volatile unsigned *)GPIO0_ISR1L,
|
|
(in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
|
|
#endif
|
|
|
|
/* insert callbacks */
|
|
this->IO_ADDR_R = ppchameleonevb_fio_base;
|
|
this->IO_ADDR_W = ppchameleonevb_fio_base;
|
|
this->hwcontrol = ppchameleonevb_hwcontrol;
|
|
#ifdef USE_READY_BUSY_PIN
|
|
this->dev_ready = ppchameleonevb_device_ready;
|
|
#endif
|
|
this->chip_delay = NAND_SMALL_DELAY_US;
|
|
|
|
/* ECC mode */
|
|
this->eccmode = NAND_ECC_SOFT;
|
|
|
|
/* Scan to find existence of the device */
|
|
if (nand_scan(ppchameleonevb_mtd, 1)) {
|
|
iounmap((void *)ppchameleonevb_fio_base);
|
|
kfree(ppchameleonevb_mtd);
|
|
return -ENXIO;
|
|
}
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
|
|
mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
|
|
if (mtd_parts_nb > 0)
|
|
part_type = "command line";
|
|
else
|
|
mtd_parts_nb = 0;
|
|
#endif
|
|
if (mtd_parts_nb == 0) {
|
|
mtd_parts = partition_info_evb;
|
|
mtd_parts_nb = NUM_PARTITIONS;
|
|
part_type = "static";
|
|
}
|
|
|
|
/* Register the partitions */
|
|
printk(KERN_NOTICE "Using %s partition definition\n", part_type);
|
|
add_mtd_partitions(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
|
|
|
|
/* Return happy */
|
|
return 0;
|
|
}
|
|
|
|
module_init(ppchameleonevb_init);
|
|
|
|
/*
|
|
* Clean up routine
|
|
*/
|
|
static void __exit ppchameleonevb_cleanup(void)
|
|
{
|
|
struct nand_chip *this;
|
|
|
|
/* Release resources, unregister device(s) */
|
|
nand_release(ppchameleon_mtd);
|
|
nand_release(ppchameleonevb_mtd);
|
|
|
|
/* Release iomaps */
|
|
this = (struct nand_chip *) &ppchameleon_mtd[1];
|
|
iounmap((void *) this->IO_ADDR_R;
|
|
this = (struct nand_chip *) &ppchameleonevb_mtd[1];
|
|
iounmap((void *) this->IO_ADDR_R;
|
|
|
|
/* Free the MTD device structure */
|
|
kfree (ppchameleon_mtd);
|
|
kfree (ppchameleonevb_mtd);
|
|
}
|
|
module_exit(ppchameleonevb_cleanup);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>");
|
|
MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");
|