lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
55c0d1005a
android_kernel_xiaomi_sm8350/include/asm-mips/sibyte/bcm1480_regs.h
Maciej W. Rozycki b45d527974 sb1250-duart.c: SB1250 DUART serial support 
This is a driver for the SB1250 DUART, a dual serial port implementation
included in the Broadcom family of SOCs descending from the SiByte SB1250
MIPS64 chip multiprocessor.  It is a new implementation replacing the
old-fashioned driver currently present in the linux-mips.org tree.  It
supports all the usual features one would expect from a(n asynchronous)
serial driver, including modem line control (as far as hardware supports it
-- there is edge detection logic missing from the DCD and RI lines and the
driver does not implement polling of these lines at the moment), the serial
console, BREAK transmission and reception, including the magic SysRq.  The
receive FIFO threshold is not maintained though.

The driver was tested with a SWARM board which uses a BCM1250 SOC (which is
dual MIPS64 CMP) and has both ports of the single DUART implemented wired
externally.  Both were tested.  Testing included using the ports as
terminal lines at 1200bps (which is the ports minimum), 115200bps and a
couple of random speeds inbetween.  The modem lines were verified to
operate correctly.  No testing was performed with a use as a network
interface, like with SLIP or PPP.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00

898 lines
41 KiB
C
Raw Blame History

/* *********************************************************************
* BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
*
* Register Definitions File: bcm1480_regs.h
*
* This module contains the addresses of the on-chip peripherals
* on the BCM1280 and BCM1480.
*
* BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
*
*********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
#ifndef _BCM1480_REGS_H
#define _BCM1480_REGS_H
#include "sb1250_defs.h"
/* *********************************************************************
* Pull in the BCM1250's registers since a great deal of the 1480's
* functions are the same as the BCM1250.
********************************************************************* */
#include "sb1250_regs.h"
/* *********************************************************************
* Some general notes:
*
* Register addresses are grouped by function and follow the order
* of the User Manual.
*
* For the most part, when there is more than one peripheral
* of the same type on the SOC, the constants below will be
* offsets from the base of each peripheral. For example,
* the MAC registers are described as offsets from the first
* MAC register, and there will be a MAC_REGISTER() macro
* to calculate the base address of a given MAC.
*
* The information in this file is based on the BCM1X55/BCM1X80
* User Manual, Document 1X55_1X80-UM100-R, 22/12/03.
*
* This file is basically a "what's new" header file. Since the
* BCM1250 and the new BCM1480 (and derivatives) share many common
* features, this file contains only what's new or changed from
* the 1250. (above, you can see that we include the 1250 symbols
* to get the base functionality).
*
* In software, be sure to use the correct symbols, particularly
* for blocks that are different between the two chip families.
* All BCM1480-specific symbols have _BCM1480_ in their names,
* and all BCM1250-specific and "base" functions that are common in
* both chips have no special names (this is for compatibility with
* older include files). Therefore, if you're working with the
* SCD, which is very different on each chip, A_SCD_xxx implies
* the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
* version.
********************************************************************* */
/* *********************************************************************
* Memory Controller Registers (Section 6)
********************************************************************* */
#define A_BCM1480_MC_BASE_0 0x0010050000
#define A_BCM1480_MC_BASE_1 0x0010051000
#define A_BCM1480_MC_BASE_2 0x0010052000
#define A_BCM1480_MC_BASE_3 0x0010053000
#define BCM1480_MC_REGISTER_SPACING 0x1000
#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
#define A_BCM1480_MC_REGISTER(ctlid,reg) (A_BCM1480_MC_BASE(ctlid)+(reg))
#define R_BCM1480_MC_CONFIG 0x0000000100
#define R_BCM1480_MC_CS_START 0x0000000120
#define R_BCM1480_MC_CS_END 0x0000000140
#define S_BCM1480_MC_CS_STARTEND 24
#define R_BCM1480_MC_CS01_ROW0 0x0000000180
#define R_BCM1480_MC_CS01_ROW1 0x00000001A0
#define R_BCM1480_MC_CS23_ROW0 0x0000000200
#define R_BCM1480_MC_CS23_ROW1 0x0000000220
#define R_BCM1480_MC_CS01_COL0 0x0000000280
#define R_BCM1480_MC_CS01_COL1 0x00000002A0
#define R_BCM1480_MC_CS23_COL0 0x0000000300
#define R_BCM1480_MC_CS23_COL1 0x0000000320
#define R_BCM1480_MC_CSX_BASE 0x0000000180
#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */
#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */
#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */
#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */
#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */
#define R_BCM1480_MC_CS01_BA 0x0000000380
#define R_BCM1480_MC_CS23_BA 0x00000003A0
#define R_BCM1480_MC_DRAMCMD 0x0000000400
#define R_BCM1480_MC_DRAMMODE 0x0000000420
#define R_BCM1480_MC_CLOCK_CFG 0x0000000440
#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG
#define R_BCM1480_MC_TEST_DATA 0x0000000480
#define R_BCM1480_MC_TEST_ECC 0x00000004A0
#define R_BCM1480_MC_TIMING1 0x00000004C0
#define R_BCM1480_MC_TIMING2 0x00000004E0
#define R_BCM1480_MC_DLL_CFG 0x0000000500
#define R_BCM1480_MC_DRIVE_CFG 0x0000000520
#if SIBYTE_HDR_FEATURE(1480, PASS2)
#define R_BCM1480_MC_ODT 0x0000000460
#define R_BCM1480_MC_ECC_STATUS 0x0000000540
#endif
/* Global registers (single instance) */
#define A_BCM1480_MC_GLB_CONFIG 0x0010054100
#define A_BCM1480_MC_GLB_INTLV 0x0010054120
#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140
#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160
#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180
#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0
/* *********************************************************************
* L2 Cache Control Registers (Section 5)
********************************************************************* */
#define A_BCM1480_L2_BASE 0x0010040000
#define A_BCM1480_L2_READ_TAG 0x0010040018
#define A_BCM1480_L2_ECC_TAG 0x0010040038
#define A_BCM1480_L2_MISC0_VALUE 0x0010040058
#define A_BCM1480_L2_MISC1_VALUE 0x0010040078
#define A_BCM1480_L2_MISC2_VALUE 0x0010040098
#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */
#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */
#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */
#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */
#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */
#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */
#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */
#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */
#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */
#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */
#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8))
#define A_BCM1480_L2_BANK_BASE 0x00D0300000
#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000
/* *********************************************************************
* PCI-X Interface Registers (Section 7)
********************************************************************* */
#define A_BCM1480_PCI_BASE 0x0010061400
#define A_BCM1480_PCI_RESET 0x0010061400
#define A_BCM1480_PCI_DLL 0x0010061500
#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000
/* *********************************************************************
* Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
********************************************************************* */
/* No register changes with Rev.C BCM1250, but one additional MAC */
#define A_BCM1480_MAC_BASE_2 0x0010066000
#ifndef A_MAC_BASE_2
#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2
#endif
#define A_BCM1480_MAC_BASE_3 0x0010067000
#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3
#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038
#ifndef R_MAC_DMA_OODPKTLOST
#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST
#endif
/* *********************************************************************
* DUART Registers (Section 14)
********************************************************************* */
/* No significant differences from BCM1250, two DUARTs */
/* Conventions, per user manual:
* DUART generic, channels A,B,C,D
* DUART0 implementing channels A,B
* DUART1 inplementing channels C,D
*/
#define BCM1480_DUART_NUM_PORTS 4
#define A_BCM1480_DUART0 0x0010060000
#define A_BCM1480_DUART1 0x0010060400
#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
#define BCM1480_DUART_CHANREG_SPACING 0x100
#define A_BCM1480_DUART_CHANREG(chan, reg) \
(A_BCM1480_DUART(chan) + \
BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg))
#define A_BCM1480_DUART_CTRLREG(chan, reg) \
(A_BCM1480_DUART(chan) + \
BCM1480_DUART_CHANREG_SPACING * 3 + (reg))
#define R_BCM1480_DUART_IMRREG(chan) \
(R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
#define R_BCM1480_DUART_ISRREG(chan) \
(R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
#define A_BCM1480_DUART_IMRREG(chan) \
(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan)))
#define A_BCM1480_DUART_ISRREG(chan) \
(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan)))
#define A_BCM1480_DUART_IN_PORT(chan) \
(A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT))
/*
* These constants are the absolute addresses.
*/
#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400
#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410
#define A_BCM1480_DUART_STATUS_C 0x0010060420
#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430
#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440
#define A_BCM1480_DUART_CMD_C 0x0010060450
#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460
#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470
#define A_BCM1480_DUART_OPCR_C 0x0010060480
#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490
#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500
#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510
#define A_BCM1480_DUART_STATUS_D 0x0010060520
#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530
#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540
#define A_BCM1480_DUART_CMD_D 0x0010060550
#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560
#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570
#define A_BCM1480_DUART_OPCR_D 0x0010060580
#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590
#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600
#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610
#define A_BCM1480_DUART_ISR_C 0x0010060620
#define A_BCM1480_DUART_IMR_C 0x0010060630
#define A_BCM1480_DUART_ISR_D 0x0010060640
#define A_BCM1480_DUART_IMR_D 0x0010060650
#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660
#define A_BCM1480_DUART_OPCR_CD 0x0010060670
#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680
#define A_BCM1480_DUART_ISR_CD 0x0010060690
#define A_BCM1480_DUART_IMR_CD 0x00100606A0
#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0
#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0
#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0
#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0
/* *********************************************************************
* Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16)
********************************************************************* */
#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58
#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68
/* *********************************************************************
* GPIO Registers (Section 17)
********************************************************************* */
/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78
#define R_BCM1480_GPIO_INT_ADD_TYPE (-8)
#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE
#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE
/* *********************************************************************
* SMBus Registers (Section 18)
********************************************************************* */
/* No changes from BCM1250 */
/* *********************************************************************
* Timer Registers (Sections 4.6)
********************************************************************* */
/* BCM1480 has two additional watchdogs */
/* Watchdog timers */
#define A_BCM1480_SCD_WDOG_2 0x0010022050
#define A_BCM1480_SCD_WDOG_3 0x0010022150
#define BCM1480_SCD_NUM_WDOGS 4
#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
#define A_BCM1480_SCD_WDOG_REGISTER(w,r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050
#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058
#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060
#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150
#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158
#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160
/* BCM1480 has two additional compare registers */
#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18
/* *********************************************************************
* System Control Registers (Section 4.2)
********************************************************************* */
/* Scratch register in different place */
#define A_BCM1480_SCD_SCRATCH 0x100200A0
/* *********************************************************************
* System Address Trap Registers (Section 4.9)
********************************************************************* */
/* No changes from BCM1250 */
/* *********************************************************************
* System Interrupt Mapper Registers (Sections 4.3-4.5)
********************************************************************* */
#define A_BCM1480_IMR_CPU0_BASE 0x0010020000
#define A_BCM1480_IMR_CPU1_BASE 0x0010022000
#define A_BCM1480_IMR_CPU2_BASE 0x0010024000
#define A_BCM1480_IMR_CPU3_BASE 0x0010026000
#define BCM1480_IMR_REGISTER_SPACING 0x2000
#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13
#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
#define A_BCM1480_IMR_REGISTER(cpu,reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
/* Most IMR registers are 128 bits, implemented as non-contiguous
64-bit registers high (_H) and low (_L) */
#define BCM1480_IMR_HL_SPACING 0x1000
#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010
#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018
#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020
#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028
#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038
#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048
#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0
#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8
#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0
#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0
#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8
#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0
#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100
#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8
#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200
#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64
#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010
#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018
#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020
#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028
#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038
#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100
#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200
#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000
#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100
#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200
#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300
#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100
#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
(cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu,reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */
#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */
/*
* these macros work together to build the address of a mailbox
* register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
* for mbox_0_set_cpu2 returns 0x00100240C8
*/
#define R_BCM1480_IMR_MAILBOX_CPU 0x00
#define R_BCM1480_IMR_MAILBOX_SET 0x08
#define R_BCM1480_IMR_MAILBOX_CLR 0x10
#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
#define A_BCM1480_MAILBOX_REGISTER(num,reg,cpu) \
(A_BCM1480_IMR_CPU0_BASE + \
(num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
(cpu * BCM1480_IMR_REGISTER_SPACING) + \
(R_BCM1480_IMR_MAILBOX_0_CPU + reg))
/* *********************************************************************
* System Performance Counter Registers (Section 4.7)
********************************************************************* */
/* BCM1480 has four more performance counter registers, and two control
registers. */
#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0
#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0
#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0
#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8
#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1
#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0
#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1
#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2
#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3
#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0
#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8
#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500
#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508
#define BCM1480_SCD_NUM_PERF_CNT 8
#define BCM1480_SCD_PERF_CNT_SPACING 8
#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
/* *********************************************************************
* System Bus Watcher Registers (Section 4.8)
********************************************************************* */
/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8
/* *********************************************************************
* System Debug Controller Registers (Section 19)
********************************************************************* */
/* Same as 1250 */
/* *********************************************************************
* System Trace Unit Registers (Sections 4.10)
********************************************************************* */
/* Same as 1250 */
/* *********************************************************************
* Data Mover DMA Registers (Section 10.7)
********************************************************************* */
/* Same as 1250 */
/* *********************************************************************
* HyperTransport Interface Registers (Section 8)
********************************************************************* */
#define BCM1480_HT_NUM_PORTS 3
#define BCM1480_HT_PORT_SPACING 0x800
#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000
#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800
#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000
#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000
/* *********************************************************************
* Node Controller Registers (Section 9)
********************************************************************* */
#define A_BCM1480_NC_BASE 0x00DFBD0000
#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000
#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020
#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040
#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060
#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080
#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0
#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0
#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0
#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100
#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120
#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140
#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200
#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220
#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240
#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260
#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280
#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0
#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0
#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0
#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300
#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320
#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000
#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020
#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040
#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060
#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
/* *********************************************************************
* H&R Block Configuration Registers (Section 12.4)
********************************************************************* */
#define A_BCM1480_HR_BASE_0 0x00DF820000
#define A_BCM1480_HR_BASE_1 0x00DF8A0000
#define A_BCM1480_HR_BASE_2 0x00DF920000
#define BCM1480_HR_REGISTER_SPACING 0x80000
#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
#define A_BCM1480_HR_REGISTER(idx,reg) (A_BCM1480_HR_BASE(idx) + (reg))
#define R_BCM1480_HR_CFG 0x0000000000
#define R_BCM1480_HR_MAPPING 0x0000010010
#define BCM1480_HR_RULE_SPACING 0x0000000010
#define BCM1480_HR_NUM_RULES 16
#define BCM1480_HR_OP_OFFSET 0x0000000100
#define BCM1480_HR_TYPE_OFFSET 0x0000000108
#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
#define BCM1480_HR_LEAF_SPACING 0x0000000010
#define BCM1480_HR_NUM_LEAVES 10
#define BCM1480_HR_LEAF_OFFSET 0x0000000300
#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
#define R_BCM1480_HR_EX_LEAF0 0x00000003A0
#define BCM1480_HR_PATH_SPACING 0x0000000010
#define BCM1480_HR_NUM_PATHS 16
#define BCM1480_HR_PATH_OFFSET 0x0000000600
#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700
#define BCM1480_HR_ROUTE_SPACING 8
#define BCM1480_HR_NUM_ROUTES 512
#define BCM1480_HR_ROUTE_OFFSET 0x0000001000
#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
/* checked to here - ehs */
/* *********************************************************************
* Packet Manager DMA Registers (Section 12.5)
********************************************************************* */
#define A_BCM1480_PM_BASE 0x0010056000
#define A_BCM1480_PMI_LCL_0 0x0010058000
#define A_BCM1480_PMO_LCL_0 0x001005C000
#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
#define BCM1480_PM_LCL_REGISTER_SPACING 0x100
#define BCM1480_PM_NUM_CHANNELS 32
#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
#define A_BCM1480_PMI_LCL_REGISTER(idx,reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
#define A_BCM1480_PMO_LCL_REGISTER(idx,reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
#define BCM1480_PM_INT_PACKING 8
#define BCM1480_PM_INT_FUNCTION_SPACING 0x40
#define BCM1480_PM_INT_NUM_FUNCTIONS 3
/*
* DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
*/
#define R_BCM1480_PM_BASE_SIZE 0x0000000000
#define R_BCM1480_PM_CNT 0x0000000008
#define R_BCM1480_PM_PFCNT 0x0000000010
#define R_BCM1480_PM_LAST 0x0000000018
#define R_BCM1480_PM_PFINDX 0x0000000020
#define R_BCM1480_PM_INT_WMK 0x0000000028
#define R_BCM1480_PM_CONFIG0 0x0000000030
#define R_BCM1480_PM_LOCALDEBUG 0x0000000078
#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */
#define R_BCM1480_PM_INT_CNFG 0x0000000088
#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090
#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */
#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */
/*
* Global Registers (Not Channelized)
*/
#define A_BCM1480_PMI_GLB_0 0x0010056000
#define A_BCM1480_PMO_GLB_0 0x0010057000
/*
* PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
*/
#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */
#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
/*
* Interrupt mapping registers
*/
#define A_BCM1480_PMI_INT_0 0x0010056800
#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
#define A_BCM1480_PMO_INT_0 0x0010057800
#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
/*
* Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
*/
#define R_BCM1480_PM_INT_ST 0x0000000000
#define R_BCM1480_PM_INT_MSK 0x0000000040
#define R_BCM1480_PM_INT_CLR 0x0000000080
#define R_BCM1480_PM_MRGD_INT 0x00000000C0
/*
* Debug registers (global)
*/
#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000
#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8
#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8
#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000
#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8
#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8
/* *********************************************************************
* Switch performance counters
********************************************************************* */
#define A_BCM1480_SWPERF_CFG 0xdfb91800
#define A_BCM1480_SWPERF_CNT0 0xdfb91880
#define A_BCM1480_SWPERF_CNT1 0xdfb91888
#define A_BCM1480_SWPERF_CNT2 0xdfb91890
#define A_BCM1480_SWPERF_CNT3 0xdfb91898
/* *********************************************************************
* Switch Trace Unit
********************************************************************* */
#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000
#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100
#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108
#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200
#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208
#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300
#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400
#define A_BCM1480_SWTRC_CFG 0xDFB91500
#define A_BCM1480_SWTRC_READ 0xDFB91508
#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000
#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8))
#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8))
#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8))
#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16))
#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16))
#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16))
#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16))
/* *********************************************************************
* High-Speed Port Registers (Section 13)
********************************************************************* */
#define A_BCM1480_HSP_BASE_0 0x00DF810000
#define A_BCM1480_HSP_BASE_1 0x00DF890000
#define A_BCM1480_HSP_BASE_2 0x00DF910000
#define BCM1480_HSP_REGISTER_SPACING 0x80000
#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
#define A_BCM1480_HSP_REGISTER(idx,reg) (A_BCM1480_HSP_BASE(idx) + (reg))
#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000
#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008
#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020
#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028
#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200
#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208
#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800
#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808
#define R_BCM1480_HSP_RX_TEST 0x0000000810
#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818
#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820
#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828
#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830
#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838
#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058
#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
/* XXX Following registers were shuffled. Renamed/renumbered per errata. */
#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078
#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080
#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088
#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090
#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098
#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8
#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8
#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8
#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8
#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0
#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8
#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100
#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108
#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110
#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118
#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120
#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000
#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008
#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058
#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078
#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080
#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088
#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090
#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098
#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0
#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100
#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108
#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200
#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208
#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800
#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808
#define R_BCM1480_HSP_TX_TEST 0x0000040810
#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840
#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848
#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850
#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860
#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868
#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870
#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878
#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888
#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
/* *********************************************************************
* Physical Address Map (Table 10 and Figure 7)
********************************************************************* */
#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000)
#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000)
#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000)
#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000)
#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000)
#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000)
#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000)
#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000)
#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000)
#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000)
#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000)
#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000)
#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000)
#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000)
#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000)
#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000)
#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000)
#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000)
#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000)
#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000)
#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000)
#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000)
#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000)
#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000)
#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000)
#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000)
#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000)
#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000)
#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000)
#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024))
#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000)
#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000)
#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000)
#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000)
#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000)
/* *********************************************************************
* L2 Cache as RAM (Table 54)
********************************************************************* */
#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000)
#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8
#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000)
#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000)
#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000)
#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000)
#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000)
#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000)
#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000)
#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000)
#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000)
#endif /* _BCM1480_REGS_H */
Reference in New Issue View Git Blame Copy Permalink