90e8eafc93
Updated commands fwt_add and fwt_list, bt_list. New commands: bt_get_invert, bt_set_invert, to invert the blinding table, i.e., receive only frames from nodes listed in the BT. This patch needs/is needed for firmware 5.220.9.p11. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
341 lines
12 KiB
C
341 lines
12 KiB
C
/**
|
|
* This file contains definitions of WLAN commands.
|
|
*/
|
|
|
|
#ifndef _HOST_H_
|
|
#define _HOST_H_
|
|
|
|
/** PUBLIC DEFINITIONS */
|
|
#define DEFAULT_AD_HOC_CHANNEL 6
|
|
#define DEFAULT_AD_HOC_CHANNEL_A 36
|
|
|
|
/** IEEE 802.11 oids */
|
|
#define OID_802_11_SSID 0x00008002
|
|
#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008
|
|
#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009
|
|
#define OID_802_11_RTS_THRESHOLD 0x0000800A
|
|
#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D
|
|
#define OID_802_11_SUPPORTED_RATES 0x0000800E
|
|
#define OID_802_11_STATISTICS 0x00008012
|
|
#define OID_802_11_TX_RETRYCOUNT 0x0000801D
|
|
#define OID_802_11D_ENABLE 0x00008020
|
|
|
|
#define cmd_option_waitforrsp 0x0002
|
|
|
|
/** Host command ID */
|
|
#define cmd_code_dnld 0x0002
|
|
#define cmd_get_hw_spec 0x0003
|
|
#define cmd_eeprom_update 0x0004
|
|
#define cmd_802_11_reset 0x0005
|
|
#define cmd_802_11_scan 0x0006
|
|
#define cmd_802_11_get_log 0x000b
|
|
#define cmd_mac_multicast_adr 0x0010
|
|
#define cmd_802_11_authenticate 0x0011
|
|
#define cmd_802_11_eeprom_access 0x0059
|
|
#define cmd_802_11_associate 0x0050
|
|
#define cmd_802_11_set_wep 0x0013
|
|
#define cmd_802_11_get_stat 0x0014
|
|
#define cmd_802_3_get_stat 0x0015
|
|
#define cmd_802_11_snmp_mib 0x0016
|
|
#define cmd_mac_reg_map 0x0017
|
|
#define cmd_bbp_reg_map 0x0018
|
|
#define cmd_mac_reg_access 0x0019
|
|
#define cmd_bbp_reg_access 0x001a
|
|
#define cmd_rf_reg_access 0x001b
|
|
#define cmd_802_11_radio_control 0x001c
|
|
#define cmd_802_11_rf_channel 0x001d
|
|
#define cmd_802_11_rf_tx_power 0x001e
|
|
#define cmd_802_11_rssi 0x001f
|
|
#define cmd_802_11_rf_antenna 0x0020
|
|
|
|
#define cmd_802_11_ps_mode 0x0021
|
|
|
|
#define cmd_802_11_data_rate 0x0022
|
|
#define cmd_rf_reg_map 0x0023
|
|
#define cmd_802_11_deauthenticate 0x0024
|
|
#define cmd_802_11_reassociate 0x0025
|
|
#define cmd_802_11_disassociate 0x0026
|
|
#define cmd_mac_control 0x0028
|
|
#define cmd_802_11_ad_hoc_start 0x002b
|
|
#define cmd_802_11_ad_hoc_join 0x002c
|
|
|
|
#define cmd_802_11_query_tkip_reply_cntrs 0x002e
|
|
#define cmd_802_11_enable_rsn 0x002f
|
|
#define cmd_802_11_pairwise_tsc 0x0036
|
|
#define cmd_802_11_group_tsc 0x0037
|
|
#define cmd_802_11_key_material 0x005e
|
|
|
|
#define cmd_802_11_set_afc 0x003c
|
|
#define cmd_802_11_get_afc 0x003d
|
|
|
|
#define cmd_802_11_ad_hoc_stop 0x0040
|
|
|
|
#define cmd_802_11_beacon_stop 0x0049
|
|
|
|
#define cmd_802_11_mac_address 0x004D
|
|
#define cmd_802_11_eeprom_access 0x0059
|
|
|
|
#define cmd_802_11_band_config 0x0058
|
|
|
|
#define cmd_802_11d_domain_info 0x005b
|
|
|
|
#define cmd_802_11_sleep_params 0x0066
|
|
|
|
#define cmd_802_11_inactivity_timeout 0x0067
|
|
|
|
#define cmd_802_11_tpc_cfg 0x0072
|
|
#define cmd_802_11_pwr_cfg 0x0073
|
|
|
|
#define cmd_802_11_led_gpio_ctrl 0x004e
|
|
|
|
#define cmd_802_11_subscribe_event 0x0075
|
|
|
|
#define cmd_802_11_rate_adapt_rateset 0x0076
|
|
|
|
#define cmd_802_11_tx_rate_query 0x007f
|
|
|
|
#define cmd_get_tsf 0x0080
|
|
|
|
#define cmd_bt_access 0x0087
|
|
#define cmd_ret_bt_access 0x8087
|
|
|
|
#define cmd_fwt_access 0x0095
|
|
#define cmd_ret_fwt_access 0x8095
|
|
|
|
#define cmd_mesh_access 0x009b
|
|
#define cmd_ret_mesh_access 0x809b
|
|
|
|
/* For the IEEE Power Save */
|
|
#define cmd_subcmd_enter_ps 0x0030
|
|
#define cmd_subcmd_exit_ps 0x0031
|
|
#define cmd_subcmd_sleep_confirmed 0x0034
|
|
#define cmd_subcmd_full_powerdown 0x0035
|
|
#define cmd_subcmd_full_powerup 0x0036
|
|
|
|
/* command RET code, MSB is set to 1 */
|
|
#define cmd_ret_hw_spec_info 0x8003
|
|
#define cmd_ret_eeprom_update 0x8004
|
|
#define cmd_ret_802_11_reset 0x8005
|
|
#define cmd_ret_802_11_scan 0x8006
|
|
#define cmd_ret_802_11_get_log 0x800b
|
|
#define cmd_ret_mac_control 0x8028
|
|
#define cmd_ret_mac_multicast_adr 0x8010
|
|
#define cmd_ret_802_11_authenticate 0x8011
|
|
#define cmd_ret_802_11_deauthenticate 0x8024
|
|
#define cmd_ret_802_11_associate 0x8012
|
|
#define cmd_ret_802_11_reassociate 0x8025
|
|
#define cmd_ret_802_11_disassociate 0x8026
|
|
#define cmd_ret_802_11_set_wep 0x8013
|
|
#define cmd_ret_802_11_stat 0x8014
|
|
#define cmd_ret_802_3_stat 0x8015
|
|
#define cmd_ret_802_11_snmp_mib 0x8016
|
|
#define cmd_ret_mac_reg_map 0x8017
|
|
#define cmd_ret_bbp_reg_map 0x8018
|
|
#define cmd_ret_rf_reg_map 0x8023
|
|
#define cmd_ret_mac_reg_access 0x8019
|
|
#define cmd_ret_bbp_reg_access 0x801a
|
|
#define cmd_ret_rf_reg_access 0x801b
|
|
#define cmd_ret_802_11_radio_control 0x801c
|
|
#define cmd_ret_802_11_rf_channel 0x801d
|
|
#define cmd_ret_802_11_rssi 0x801f
|
|
#define cmd_ret_802_11_rf_tx_power 0x801e
|
|
#define cmd_ret_802_11_rf_antenna 0x8020
|
|
#define cmd_ret_802_11_ps_mode 0x8021
|
|
#define cmd_ret_802_11_data_rate 0x8022
|
|
|
|
#define cmd_ret_802_11_ad_hoc_start 0x802B
|
|
#define cmd_ret_802_11_ad_hoc_join 0x802C
|
|
|
|
#define cmd_ret_802_11_query_tkip_reply_cntrs 0x802e
|
|
#define cmd_ret_802_11_enable_rsn 0x802f
|
|
#define cmd_ret_802_11_pairwise_tsc 0x8036
|
|
#define cmd_ret_802_11_group_tsc 0x8037
|
|
#define cmd_ret_802_11_key_material 0x805e
|
|
|
|
#define cmd_enable_rsn 0x0001
|
|
#define cmd_disable_rsn 0x0000
|
|
|
|
#define cmd_act_set 0x0001
|
|
#define cmd_act_get 0x0000
|
|
|
|
#define cmd_act_get_AES (cmd_act_get + 2)
|
|
#define cmd_act_set_AES (cmd_act_set + 2)
|
|
#define cmd_act_remove_aes (cmd_act_set + 3)
|
|
|
|
#define cmd_ret_802_11_set_afc 0x803c
|
|
#define cmd_ret_802_11_get_afc 0x803d
|
|
|
|
#define cmd_ret_802_11_ad_hoc_stop 0x8040
|
|
|
|
#define cmd_ret_802_11_beacon_stop 0x8049
|
|
|
|
#define cmd_ret_802_11_mac_address 0x804D
|
|
#define cmd_ret_802_11_eeprom_access 0x8059
|
|
|
|
#define cmd_ret_802_11_band_config 0x8058
|
|
|
|
#define cmd_ret_802_11_sleep_params 0x8066
|
|
|
|
#define cmd_ret_802_11_inactivity_timeout 0x8067
|
|
|
|
#define cmd_ret_802_11d_domain_info (0x8000 | \
|
|
cmd_802_11d_domain_info)
|
|
|
|
#define cmd_ret_802_11_tpc_cfg (cmd_802_11_tpc_cfg | 0x8000)
|
|
#define cmd_ret_802_11_pwr_cfg (cmd_802_11_pwr_cfg | 0x8000)
|
|
|
|
#define cmd_ret_802_11_led_gpio_ctrl 0x804e
|
|
|
|
#define cmd_ret_802_11_subscribe_event (cmd_802_11_subscribe_event | 0x8000)
|
|
|
|
#define cmd_ret_802_11_rate_adapt_rateset (cmd_802_11_rate_adapt_rateset | 0x8000)
|
|
|
|
#define cmd_rte_802_11_tx_rate_query (cmd_802_11_tx_rate_query | 0x8000)
|
|
|
|
#define cmd_ret_get_tsf 0x8080
|
|
|
|
/* Define action or option for cmd_802_11_set_wep */
|
|
#define cmd_act_add 0x0002
|
|
#define cmd_act_remove 0x0004
|
|
#define cmd_act_use_default 0x0008
|
|
|
|
#define cmd_type_wep_40_bit 0x0001
|
|
#define cmd_type_wep_104_bit 0x0002
|
|
|
|
#define cmd_NUM_OF_WEP_KEYS 4
|
|
|
|
#define cmd_WEP_KEY_INDEX_MASK 0x3fff
|
|
|
|
/* Define action or option for cmd_802_11_reset */
|
|
#define cmd_act_halt 0x0003
|
|
|
|
/* Define action or option for cmd_802_11_scan */
|
|
#define cmd_bss_type_bss 0x0001
|
|
#define cmd_bss_type_ibss 0x0002
|
|
#define cmd_bss_type_any 0x0003
|
|
|
|
/* Define action or option for cmd_802_11_scan */
|
|
#define cmd_scan_type_active 0x0000
|
|
#define cmd_scan_type_passive 0x0001
|
|
|
|
#define cmd_scan_radio_type_bg 0
|
|
|
|
#define cmd_scan_probe_delay_time 0
|
|
|
|
/* Define action or option for cmd_mac_control */
|
|
#define cmd_act_mac_rx_on 0x0001
|
|
#define cmd_act_mac_tx_on 0x0002
|
|
#define cmd_act_mac_loopback_on 0x0004
|
|
#define cmd_act_mac_wep_enable 0x0008
|
|
#define cmd_act_mac_int_enable 0x0010
|
|
#define cmd_act_mac_multicast_enable 0x0020
|
|
#define cmd_act_mac_broadcast_enable 0x0040
|
|
#define cmd_act_mac_promiscuous_enable 0x0080
|
|
#define cmd_act_mac_all_multicast_enable 0x0100
|
|
#define cmd_act_mac_strict_protection_enable 0x0400
|
|
|
|
/* Define action or option for cmd_802_11_radio_control */
|
|
#define cmd_type_auto_preamble 0x0001
|
|
#define cmd_type_short_preamble 0x0002
|
|
#define cmd_type_long_preamble 0x0003
|
|
|
|
#define TURN_ON_RF 0x01
|
|
#define RADIO_ON 0x01
|
|
#define RADIO_OFF 0x00
|
|
|
|
#define SET_AUTO_PREAMBLE 0x05
|
|
#define SET_SHORT_PREAMBLE 0x03
|
|
#define SET_LONG_PREAMBLE 0x01
|
|
|
|
/* Define action or option for CMD_802_11_RF_CHANNEL */
|
|
#define cmd_opt_802_11_rf_channel_get 0x00
|
|
#define cmd_opt_802_11_rf_channel_set 0x01
|
|
|
|
/* Define action or option for cmd_802_11_rf_tx_power */
|
|
#define cmd_act_tx_power_opt_get 0x0000
|
|
#define cmd_act_tx_power_opt_set_high 0x8007
|
|
#define cmd_act_tx_power_opt_set_mid 0x8004
|
|
#define cmd_act_tx_power_opt_set_low 0x8000
|
|
|
|
#define cmd_act_tx_power_index_high 0x0007
|
|
#define cmd_act_tx_power_index_mid 0x0004
|
|
#define cmd_act_tx_power_index_low 0x0000
|
|
|
|
/* Define action or option for cmd_802_11_data_rate */
|
|
#define cmd_act_set_tx_auto 0x0000
|
|
#define cmd_act_set_tx_fix_rate 0x0001
|
|
#define cmd_act_get_tx_rate 0x0002
|
|
|
|
#define cmd_act_set_rx 0x0001
|
|
#define cmd_act_set_tx 0x0002
|
|
#define cmd_act_set_both 0x0003
|
|
#define cmd_act_get_rx 0x0004
|
|
#define cmd_act_get_tx 0x0008
|
|
#define cmd_act_get_both 0x000c
|
|
|
|
/* Define action or option for cmd_802_11_ps_mode */
|
|
#define cmd_type_cam 0x0000
|
|
#define cmd_type_max_psp 0x0001
|
|
#define cmd_type_fast_psp 0x0002
|
|
|
|
/* Define action or option for cmd_bt_access */
|
|
enum cmd_bt_access_opts {
|
|
/* The bt commands start at 5 instead of 1 because the old dft commands
|
|
* are mapped to 1-4. These old commands are no longer maintained and
|
|
* should not be called.
|
|
*/
|
|
cmd_act_bt_access_add = 5,
|
|
cmd_act_bt_access_del,
|
|
cmd_act_bt_access_list,
|
|
cmd_act_bt_access_reset,
|
|
cmd_act_bt_access_set_invert,
|
|
cmd_act_bt_access_get_invert
|
|
};
|
|
|
|
/* Define action or option for cmd_fwt_access */
|
|
enum cmd_fwt_access_opts {
|
|
cmd_act_fwt_access_add = 1,
|
|
cmd_act_fwt_access_del,
|
|
cmd_act_fwt_access_lookup,
|
|
cmd_act_fwt_access_list,
|
|
cmd_act_fwt_access_list_route,
|
|
cmd_act_fwt_access_list_neighbor,
|
|
cmd_act_fwt_access_reset,
|
|
cmd_act_fwt_access_cleanup,
|
|
cmd_act_fwt_access_time,
|
|
};
|
|
|
|
/* Define action or option for cmd_mesh_access */
|
|
enum cmd_mesh_access_opts {
|
|
cmd_act_mesh_get_ttl = 1,
|
|
cmd_act_mesh_set_ttl,
|
|
cmd_act_mesh_get_stats,
|
|
cmd_act_mesh_get_mpp,
|
|
cmd_act_mesh_set_mpp,
|
|
};
|
|
|
|
/** Card Event definition */
|
|
#define MACREG_INT_CODE_TX_PPA_FREE 0x00000000
|
|
#define MACREG_INT_CODE_TX_DMA_DONE 0x00000001
|
|
#define MACREG_INT_CODE_LINK_LOSE_W_SCAN 0x00000002
|
|
#define MACREG_INT_CODE_LINK_LOSE_NO_SCAN 0x00000003
|
|
#define MACREG_INT_CODE_LINK_SENSED 0x00000004
|
|
#define MACREG_INT_CODE_CMD_FINISHED 0x00000005
|
|
#define MACREG_INT_CODE_MIB_CHANGED 0x00000006
|
|
#define MACREG_INT_CODE_INIT_DONE 0x00000007
|
|
#define MACREG_INT_CODE_DEAUTHENTICATED 0x00000008
|
|
#define MACREG_INT_CODE_DISASSOCIATED 0x00000009
|
|
#define MACREG_INT_CODE_PS_AWAKE 0x0000000a
|
|
#define MACREG_INT_CODE_PS_SLEEP 0x0000000b
|
|
#define MACREG_INT_CODE_MIC_ERR_MULTICAST 0x0000000d
|
|
#define MACREG_INT_CODE_MIC_ERR_UNICAST 0x0000000e
|
|
#define MACREG_INT_CODE_WM_AWAKE 0x0000000f
|
|
#define MACREG_INT_CODE_ADHOC_BCN_LOST 0x00000011
|
|
#define MACREG_INT_CODE_RSSI_LOW 0x00000019
|
|
#define MACREG_INT_CODE_SNR_LOW 0x0000001a
|
|
#define MACREG_INT_CODE_MAX_FAIL 0x0000001b
|
|
#define MACREG_INT_CODE_RSSI_HIGH 0x0000001c
|
|
#define MACREG_INT_CODE_SNR_HIGH 0x0000001d
|
|
|
|
#endif /* _HOST_H_ */
|