71bd7877d4
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 38 ++++++++------------------------------ netxen_nic_ethtool.c | 5 ++--- netxen_nic_hw.c | 12 +++++------- netxen_nic_main.c | 8 +++----- 4 files changed, 18 insertions(+), 45 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
1162 lines
32 KiB
C
1162 lines
32 KiB
C
/*
|
|
* Copyright (C) 2003 - 2006 NetXen, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston,
|
|
* MA 02111-1307, USA.
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* info@netxen.com
|
|
* NetXen,
|
|
* 3965 Freedom Circle, Fourth floor,
|
|
* Santa Clara, CA 95054
|
|
*
|
|
*
|
|
* Main source file for NetXen NIC Driver on Linux
|
|
*
|
|
*/
|
|
|
|
#include <linux/vmalloc.h>
|
|
#include "netxen_nic_hw.h"
|
|
|
|
#include "netxen_nic.h"
|
|
#define DEFINE_GLOBAL_RECV_CRB
|
|
#include "netxen_nic_phan_reg.h"
|
|
#include "netxen_nic_ioctl.h"
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#define PHAN_VENDOR_ID 0x4040
|
|
|
|
MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID);
|
|
|
|
char netxen_nic_driver_name[] = "netxen";
|
|
static char netxen_nic_driver_string[] = "NetXen Network Driver version "
|
|
NETXEN_NIC_LINUX_VERSIONID;
|
|
|
|
#define NETXEN_NETDEV_WEIGHT 120
|
|
#define NETXEN_ADAPTER_UP_MAGIC 777
|
|
#define NETXEN_NIC_PEG_TUNE 0
|
|
|
|
/* Local functions to NetXen NIC driver */
|
|
static int __devinit netxen_nic_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent);
|
|
static void __devexit netxen_nic_remove(struct pci_dev *pdev);
|
|
static int netxen_nic_open(struct net_device *netdev);
|
|
static int netxen_nic_close(struct net_device *netdev);
|
|
static int netxen_nic_xmit_frame(struct sk_buff *, struct net_device *);
|
|
static void netxen_tx_timeout(struct net_device *netdev);
|
|
static void netxen_tx_timeout_task(struct net_device *netdev);
|
|
static void netxen_watchdog(unsigned long);
|
|
static int netxen_handle_int(struct netxen_adapter *, struct net_device *);
|
|
static int netxen_nic_ioctl(struct net_device *netdev,
|
|
struct ifreq *ifr, int cmd);
|
|
static int netxen_nic_poll(struct net_device *dev, int *budget);
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void netxen_nic_poll_controller(struct net_device *netdev);
|
|
#endif
|
|
static irqreturn_t netxen_intr(int irq, void *data);
|
|
|
|
/* PCI Device ID Table */
|
|
static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
|
|
{PCI_DEVICE(0x4040, 0x0001)},
|
|
{PCI_DEVICE(0x4040, 0x0002)},
|
|
{PCI_DEVICE(0x4040, 0x0003)},
|
|
{PCI_DEVICE(0x4040, 0x0004)},
|
|
{PCI_DEVICE(0x4040, 0x0005)},
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, netxen_pci_tbl);
|
|
|
|
/*
|
|
* netxen_nic_probe()
|
|
*
|
|
* The Linux system will invoke this after identifying the vendor ID and
|
|
* device Id in the pci_tbl supported by this module.
|
|
*
|
|
* A quad port card has one operational PCI config space, (function 0),
|
|
* which is used to access all four ports.
|
|
*
|
|
* This routine will initialize the adapter, and setup the global parameters
|
|
* along with the port's specific structure.
|
|
*/
|
|
static int __devinit
|
|
netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *netdev = NULL;
|
|
struct netxen_adapter *adapter = NULL;
|
|
struct netxen_port *port = NULL;
|
|
u8 *mem_ptr0 = NULL;
|
|
u8 *mem_ptr1 = NULL;
|
|
u8 *mem_ptr2 = NULL;
|
|
|
|
unsigned long mem_base, mem_len;
|
|
int pci_using_dac, i, err;
|
|
int ring;
|
|
struct netxen_recv_context *recv_ctx = NULL;
|
|
struct netxen_rcv_desc_ctx *rcv_desc = NULL;
|
|
struct netxen_cmd_buffer *cmd_buf_arr = NULL;
|
|
u64 mac_addr[FLASH_NUM_PORTS + 1];
|
|
int valid_mac;
|
|
|
|
printk(KERN_INFO "%s \n", netxen_nic_driver_string);
|
|
if ((err = pci_enable_device(pdev)))
|
|
return err;
|
|
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
|
|
err = -ENODEV;
|
|
goto err_out_disable_pdev;
|
|
}
|
|
|
|
if ((err = pci_request_regions(pdev, netxen_nic_driver_name)))
|
|
goto err_out_disable_pdev;
|
|
|
|
pci_set_master(pdev);
|
|
if ((pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) &&
|
|
(pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) == 0))
|
|
pci_using_dac = 1;
|
|
else {
|
|
if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) ||
|
|
(err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)))
|
|
goto err_out_free_res;
|
|
|
|
pci_using_dac = 0;
|
|
}
|
|
|
|
/* remap phys address */
|
|
mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */
|
|
mem_len = pci_resource_len(pdev, 0);
|
|
|
|
/* 128 Meg of memory */
|
|
mem_ptr0 = ioremap(mem_base, FIRST_PAGE_GROUP_SIZE);
|
|
mem_ptr1 =
|
|
ioremap(mem_base + SECOND_PAGE_GROUP_START, SECOND_PAGE_GROUP_SIZE);
|
|
mem_ptr2 =
|
|
ioremap(mem_base + THIRD_PAGE_GROUP_START, THIRD_PAGE_GROUP_SIZE);
|
|
|
|
if ((mem_ptr0 == 0UL) || (mem_ptr1 == 0UL) || (mem_ptr2 == 0UL)) {
|
|
DPRINTK(1, ERR,
|
|
"Cannot remap adapter memory aborting.:"
|
|
"0 -> %p, 1 -> %p, 2 -> %p\n",
|
|
mem_ptr0, mem_ptr1, mem_ptr2);
|
|
|
|
err = -EIO;
|
|
if (mem_ptr0)
|
|
iounmap(mem_ptr0);
|
|
if (mem_ptr1)
|
|
iounmap(mem_ptr1);
|
|
if (mem_ptr2)
|
|
iounmap(mem_ptr2);
|
|
|
|
goto err_out_free_res;
|
|
}
|
|
|
|
/*
|
|
* Allocate a adapter structure which will manage all the initialization
|
|
* as well as the common resources for all ports...
|
|
* all the ports will have pointer to this adapter as well as Adapter
|
|
* will have pointers of all the ports structures.
|
|
*/
|
|
|
|
/* One adapter structure for all 4 ports.... */
|
|
adapter = kzalloc(sizeof(struct netxen_adapter), GFP_KERNEL);
|
|
if (adapter == NULL) {
|
|
printk(KERN_ERR "%s: Could not allocate adapter memory:%d\n",
|
|
netxen_nic_driver_name,
|
|
(int)sizeof(struct netxen_adapter));
|
|
err = -ENOMEM;
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
adapter->max_tx_desc_count = MAX_CMD_DESCRIPTORS;
|
|
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS;
|
|
adapter->max_jumbo_rx_desc_count = MAX_JUMBO_RCV_DESCRIPTORS;
|
|
|
|
pci_set_drvdata(pdev, adapter);
|
|
|
|
cmd_buf_arr = (struct netxen_cmd_buffer *)vmalloc(TX_RINGSIZE);
|
|
if (cmd_buf_arr == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_out_free_adapter;
|
|
}
|
|
memset(cmd_buf_arr, 0, TX_RINGSIZE);
|
|
|
|
for (i = 0; i < MAX_RCV_CTX; ++i) {
|
|
recv_ctx = &adapter->recv_ctx[i];
|
|
for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
|
|
rcv_desc = &recv_ctx->rcv_desc[ring];
|
|
switch (RCV_DESC_TYPE(ring)) {
|
|
case RCV_DESC_NORMAL:
|
|
rcv_desc->max_rx_desc_count =
|
|
adapter->max_rx_desc_count;
|
|
rcv_desc->flags = RCV_DESC_NORMAL;
|
|
rcv_desc->dma_size = RX_DMA_MAP_LEN;
|
|
rcv_desc->skb_size = MAX_RX_BUFFER_LENGTH;
|
|
break;
|
|
|
|
case RCV_DESC_JUMBO:
|
|
rcv_desc->max_rx_desc_count =
|
|
adapter->max_jumbo_rx_desc_count;
|
|
rcv_desc->flags = RCV_DESC_JUMBO;
|
|
rcv_desc->dma_size = RX_JUMBO_DMA_MAP_LEN;
|
|
rcv_desc->skb_size = MAX_RX_JUMBO_BUFFER_LENGTH;
|
|
break;
|
|
|
|
}
|
|
rcv_desc->rx_buf_arr = (struct netxen_rx_buffer *)
|
|
vmalloc(RCV_BUFFSIZE);
|
|
|
|
if (rcv_desc->rx_buf_arr == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_out_free_rx_buffer;
|
|
}
|
|
memset(rcv_desc->rx_buf_arr, 0, RCV_BUFFSIZE);
|
|
}
|
|
|
|
}
|
|
|
|
adapter->ops = kzalloc(sizeof(struct netxen_drvops), GFP_KERNEL);
|
|
if (adapter->ops == NULL) {
|
|
printk(KERN_ERR
|
|
"%s: Could not allocate memory for adapter->ops:%d\n",
|
|
netxen_nic_driver_name,
|
|
(int)sizeof(struct netxen_adapter));
|
|
err = -ENOMEM;
|
|
goto err_out_free_rx_buffer;
|
|
}
|
|
|
|
adapter->cmd_buf_arr = cmd_buf_arr;
|
|
adapter->ahw.pci_base0 = mem_ptr0;
|
|
adapter->ahw.pci_base1 = mem_ptr1;
|
|
adapter->ahw.pci_base2 = mem_ptr2;
|
|
spin_lock_init(&adapter->tx_lock);
|
|
spin_lock_init(&adapter->lock);
|
|
#ifdef CONFIG_IA64
|
|
netxen_pinit_from_rom(adapter, 0);
|
|
udelay(500);
|
|
netxen_load_firmware(adapter);
|
|
#endif
|
|
|
|
/* initialize the buffers in adapter */
|
|
netxen_initialize_adapter_sw(adapter);
|
|
/*
|
|
* Set the CRB window to invalid. If any register in window 0 is
|
|
* accessed it should set the window to 0 and then reset it to 1.
|
|
*/
|
|
adapter->curr_window = 255;
|
|
/*
|
|
* Adapter in our case is quad port so initialize it before
|
|
* initializing the ports
|
|
*/
|
|
netxen_initialize_adapter_hw(adapter); /* initialize the adapter */
|
|
|
|
netxen_initialize_adapter_ops(adapter);
|
|
|
|
init_timer(&adapter->watchdog_timer);
|
|
adapter->ahw.xg_linkup = 0;
|
|
adapter->watchdog_timer.function = &netxen_watchdog;
|
|
adapter->watchdog_timer.data = (unsigned long)adapter;
|
|
INIT_WORK(&adapter->watchdog_task,
|
|
(void (*)(void *))netxen_watchdog_task, adapter);
|
|
adapter->ahw.pdev = pdev;
|
|
adapter->proc_cmd_buf_counter = 0;
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &adapter->ahw.revision_id);
|
|
|
|
if (pci_enable_msi(pdev)) {
|
|
adapter->flags &= ~NETXEN_NIC_MSI_ENABLED;
|
|
printk(KERN_WARNING "%s: unable to allocate MSI interrupt"
|
|
" error\n", netxen_nic_driver_name);
|
|
} else
|
|
adapter->flags |= NETXEN_NIC_MSI_ENABLED;
|
|
|
|
if (netxen_is_flash_supported(adapter) == 0 &&
|
|
netxen_get_flash_mac_addr(adapter, mac_addr) == 0)
|
|
valid_mac = 1;
|
|
else
|
|
valid_mac = 0;
|
|
|
|
/*
|
|
* Initialize all the CRB registers here.
|
|
*/
|
|
writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_PRODUCER_OFFSET));
|
|
writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_CONSUMER_OFFSET));
|
|
writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_CMD_ADDR_LO));
|
|
|
|
/* Unlock the HW, prompting the boot sequence */
|
|
writel(1,
|
|
NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE));
|
|
|
|
/* Handshake with the card before we register the devices. */
|
|
netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
|
|
|
|
/* initialize the all the ports */
|
|
|
|
for (i = 0; i < adapter->ahw.max_ports; i++) {
|
|
netdev = alloc_etherdev(sizeof(struct netxen_port));
|
|
if (!netdev) {
|
|
printk(KERN_ERR "%s: could not allocate netdev for port"
|
|
" %d\n", netxen_nic_driver_name, i + 1);
|
|
goto err_out_free_dev;
|
|
}
|
|
|
|
SET_MODULE_OWNER(netdev);
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
port = netdev_priv(netdev);
|
|
port->netdev = netdev;
|
|
port->pdev = pdev;
|
|
port->adapter = adapter;
|
|
port->portnum = i; /* Gigabit port number from 0-3 */
|
|
|
|
netdev->open = netxen_nic_open;
|
|
netdev->stop = netxen_nic_close;
|
|
netdev->hard_start_xmit = netxen_nic_xmit_frame;
|
|
netdev->get_stats = netxen_nic_get_stats;
|
|
netdev->set_multicast_list = netxen_nic_set_multi;
|
|
netdev->set_mac_address = netxen_nic_set_mac;
|
|
netdev->change_mtu = netxen_nic_change_mtu;
|
|
netdev->do_ioctl = netxen_nic_ioctl;
|
|
netdev->tx_timeout = netxen_tx_timeout;
|
|
netdev->watchdog_timeo = HZ;
|
|
|
|
SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
|
|
netdev->poll = netxen_nic_poll;
|
|
netdev->weight = NETXEN_NETDEV_WEIGHT;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
netdev->poll_controller = netxen_nic_poll_controller;
|
|
#endif
|
|
/* ScatterGather support */
|
|
netdev->features = NETIF_F_SG;
|
|
netdev->features |= NETIF_F_IP_CSUM;
|
|
netdev->features |= NETIF_F_TSO;
|
|
|
|
if (pci_using_dac)
|
|
netdev->features |= NETIF_F_HIGHDMA;
|
|
|
|
if (valid_mac) {
|
|
unsigned char *p = (unsigned char *)&mac_addr[i];
|
|
netdev->dev_addr[0] = *(p + 5);
|
|
netdev->dev_addr[1] = *(p + 4);
|
|
netdev->dev_addr[2] = *(p + 3);
|
|
netdev->dev_addr[3] = *(p + 2);
|
|
netdev->dev_addr[4] = *(p + 1);
|
|
netdev->dev_addr[5] = *(p + 0);
|
|
|
|
memcpy(netdev->perm_addr, netdev->dev_addr,
|
|
netdev->addr_len);
|
|
if (!is_valid_ether_addr(netdev->perm_addr)) {
|
|
printk(KERN_ERR "%s: Bad MAC address "
|
|
"%02x:%02x:%02x:%02x:%02x:%02x.\n",
|
|
netxen_nic_driver_name,
|
|
netdev->dev_addr[0],
|
|
netdev->dev_addr[1],
|
|
netdev->dev_addr[2],
|
|
netdev->dev_addr[3],
|
|
netdev->dev_addr[4],
|
|
netdev->dev_addr[5]);
|
|
} else {
|
|
if (adapter->ops->macaddr_set)
|
|
adapter->ops->macaddr_set(port,
|
|
netdev->
|
|
dev_addr);
|
|
}
|
|
}
|
|
INIT_WORK(&adapter->tx_timeout_task,
|
|
(void (*)(void *))netxen_tx_timeout_task, netdev);
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
|
|
if ((err = register_netdev(netdev))) {
|
|
printk(KERN_ERR "%s: register_netdev failed port #%d"
|
|
" aborting\n", netxen_nic_driver_name, i + 1);
|
|
err = -EIO;
|
|
free_netdev(netdev);
|
|
goto err_out_free_dev;
|
|
}
|
|
adapter->port_count++;
|
|
adapter->active_ports = 0;
|
|
adapter->port[i] = port;
|
|
}
|
|
|
|
/*
|
|
* delay a while to ensure that the Pegs are up & running.
|
|
* Otherwise, we might see some flaky behaviour.
|
|
*/
|
|
udelay(100);
|
|
|
|
switch (adapter->ahw.board_type) {
|
|
case NETXEN_NIC_GBE:
|
|
printk("%s: QUAD GbE board initialized\n",
|
|
netxen_nic_driver_name);
|
|
break;
|
|
|
|
case NETXEN_NIC_XGBE:
|
|
printk("%s: XGbE board initialized\n", netxen_nic_driver_name);
|
|
break;
|
|
}
|
|
|
|
adapter->driver_mismatch = 0;
|
|
|
|
return 0;
|
|
|
|
err_out_free_dev:
|
|
if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
|
|
pci_disable_msi(pdev);
|
|
for (i = 0; i < adapter->port_count; i++) {
|
|
port = adapter->port[i];
|
|
if ((port) && (port->netdev)) {
|
|
unregister_netdev(port->netdev);
|
|
free_netdev(port->netdev);
|
|
}
|
|
}
|
|
kfree(adapter->ops);
|
|
|
|
err_out_free_rx_buffer:
|
|
for (i = 0; i < MAX_RCV_CTX; ++i) {
|
|
recv_ctx = &adapter->recv_ctx[i];
|
|
for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
|
|
rcv_desc = &recv_ctx->rcv_desc[ring];
|
|
if (rcv_desc->rx_buf_arr != NULL) {
|
|
vfree(rcv_desc->rx_buf_arr);
|
|
rcv_desc->rx_buf_arr = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
vfree(cmd_buf_arr);
|
|
|
|
kfree(adapter->port);
|
|
|
|
err_out_free_adapter:
|
|
pci_set_drvdata(pdev, NULL);
|
|
kfree(adapter);
|
|
|
|
err_out_iounmap:
|
|
iounmap(mem_ptr0);
|
|
iounmap(mem_ptr1);
|
|
iounmap(mem_ptr2);
|
|
|
|
err_out_free_res:
|
|
pci_release_regions(pdev);
|
|
err_out_disable_pdev:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
|
|
static void __devexit netxen_nic_remove(struct pci_dev *pdev)
|
|
{
|
|
struct netxen_adapter *adapter;
|
|
struct netxen_port *port;
|
|
struct netxen_rx_buffer *buffer;
|
|
struct netxen_recv_context *recv_ctx;
|
|
struct netxen_rcv_desc_ctx *rcv_desc;
|
|
int i;
|
|
int ctxid, ring;
|
|
|
|
adapter = pci_get_drvdata(pdev);
|
|
if (adapter == NULL)
|
|
return;
|
|
|
|
netxen_nic_stop_all_ports(adapter);
|
|
/* leave the hw in the same state as reboot */
|
|
netxen_pinit_from_rom(adapter, 0);
|
|
udelay(500);
|
|
netxen_load_firmware(adapter);
|
|
|
|
if ((adapter->flags & NETXEN_NIC_MSI_ENABLED))
|
|
netxen_nic_disable_int(adapter);
|
|
|
|
udelay(500); /* Delay for a while to drain the DMA engines */
|
|
for (i = 0; i < adapter->port_count; i++) {
|
|
port = adapter->port[i];
|
|
if ((port) && (port->netdev)) {
|
|
unregister_netdev(port->netdev);
|
|
free_netdev(port->netdev);
|
|
}
|
|
}
|
|
|
|
if ((adapter->flags & NETXEN_NIC_MSI_ENABLED))
|
|
pci_disable_msi(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC)
|
|
netxen_free_hw_resources(adapter);
|
|
|
|
iounmap(adapter->ahw.pci_base0);
|
|
iounmap(adapter->ahw.pci_base1);
|
|
iounmap(adapter->ahw.pci_base2);
|
|
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) {
|
|
recv_ctx = &adapter->recv_ctx[ctxid];
|
|
for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
|
|
rcv_desc = &recv_ctx->rcv_desc[ring];
|
|
for (i = 0; i < rcv_desc->max_rx_desc_count; ++i) {
|
|
buffer = &(rcv_desc->rx_buf_arr[i]);
|
|
if (buffer->state == NETXEN_BUFFER_FREE)
|
|
continue;
|
|
pci_unmap_single(pdev, buffer->dma,
|
|
rcv_desc->dma_size,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (buffer->skb != NULL)
|
|
dev_kfree_skb_any(buffer->skb);
|
|
}
|
|
vfree(rcv_desc->rx_buf_arr);
|
|
}
|
|
}
|
|
|
|
vfree(adapter->cmd_buf_arr);
|
|
kfree(adapter->ops);
|
|
kfree(adapter);
|
|
}
|
|
|
|
/*
|
|
* Called when a network interface is made active
|
|
* @returns 0 on success, negative value on failure
|
|
*/
|
|
static int netxen_nic_open(struct net_device *netdev)
|
|
{
|
|
struct netxen_port *port = netdev_priv(netdev);
|
|
struct netxen_adapter *adapter = port->adapter;
|
|
int err = 0;
|
|
int ctx, ring;
|
|
|
|
if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
|
|
err = netxen_init_firmware(adapter);
|
|
if (err != 0) {
|
|
printk(KERN_ERR "Failed to init firmware\n");
|
|
return -EIO;
|
|
}
|
|
netxen_nic_flash_print(adapter);
|
|
|
|
/* setup all the resources for the Phantom... */
|
|
/* this include the descriptors for rcv, tx, and status */
|
|
netxen_nic_clear_stats(adapter);
|
|
err = netxen_nic_hw_resources(adapter);
|
|
if (err) {
|
|
printk(KERN_ERR "Error in setting hw resources:%d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
if (adapter->ops->init_port
|
|
&& adapter->ops->init_port(adapter, port->portnum) != 0) {
|
|
printk(KERN_ERR "%s: Failed to initialize port %d\n",
|
|
netxen_nic_driver_name, port->portnum);
|
|
netxen_free_hw_resources(adapter);
|
|
return -EIO;
|
|
}
|
|
if (adapter->ops->init_niu)
|
|
adapter->ops->init_niu(adapter);
|
|
for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
|
|
for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++)
|
|
netxen_post_rx_buffers(adapter, ctx, ring);
|
|
}
|
|
adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
|
|
}
|
|
adapter->active_ports++;
|
|
if (adapter->active_ports == 1) {
|
|
err = request_irq(adapter->ahw.pdev->irq, &netxen_intr,
|
|
SA_SHIRQ | SA_SAMPLE_RANDOM, netdev->name,
|
|
adapter);
|
|
if (err) {
|
|
printk(KERN_ERR "request_irq failed with: %d\n", err);
|
|
adapter->active_ports--;
|
|
return err;
|
|
}
|
|
adapter->irq = adapter->ahw.pdev->irq;
|
|
if (!adapter->driver_mismatch)
|
|
mod_timer(&adapter->watchdog_timer, jiffies);
|
|
|
|
netxen_nic_enable_int(adapter);
|
|
}
|
|
|
|
/* Done here again so that even if phantom sw overwrote it,
|
|
* we set it */
|
|
if (adapter->ops->macaddr_set)
|
|
adapter->ops->macaddr_set(port, netdev->dev_addr);
|
|
netxen_nic_set_link_parameters(port);
|
|
|
|
netxen_nic_set_multi(netdev);
|
|
if (!adapter->driver_mismatch)
|
|
netif_start_queue(netdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* netxen_nic_close - Disables a network interface entry point
|
|
*/
|
|
static int netxen_nic_close(struct net_device *netdev)
|
|
{
|
|
struct netxen_port *port = netdev_priv(netdev);
|
|
struct netxen_adapter *adapter = port->adapter;
|
|
int i, j;
|
|
struct netxen_cmd_buffer *cmd_buff;
|
|
struct netxen_skb_frag *buffrag;
|
|
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
|
|
adapter->active_ports--;
|
|
|
|
if (!adapter->active_ports) {
|
|
netxen_nic_disable_int(adapter);
|
|
if (adapter->irq)
|
|
free_irq(adapter->irq, adapter);
|
|
cmd_buff = adapter->cmd_buf_arr;
|
|
for (i = 0; i < adapter->max_tx_desc_count; i++) {
|
|
buffrag = cmd_buff->frag_array;
|
|
if (buffrag->dma) {
|
|
pci_unmap_single(port->pdev, buffrag->dma,
|
|
buffrag->length,
|
|
PCI_DMA_TODEVICE);
|
|
buffrag->dma = (u64) NULL;
|
|
}
|
|
for (j = 0; j < cmd_buff->frag_count; j++) {
|
|
buffrag++;
|
|
if (buffrag->dma) {
|
|
pci_unmap_page(port->pdev,
|
|
buffrag->dma,
|
|
buffrag->length,
|
|
PCI_DMA_TODEVICE);
|
|
buffrag->dma = (u64) NULL;
|
|
}
|
|
}
|
|
/* Free the skb we received in netxen_nic_xmit_frame */
|
|
if (cmd_buff->skb) {
|
|
dev_kfree_skb_any(cmd_buff->skb);
|
|
cmd_buff->skb = NULL;
|
|
}
|
|
cmd_buff++;
|
|
}
|
|
del_timer_sync(&adapter->watchdog_timer);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
|
|
{
|
|
struct netxen_port *port = netdev_priv(netdev);
|
|
struct netxen_adapter *adapter = port->adapter;
|
|
struct netxen_hardware_context *hw = &adapter->ahw;
|
|
unsigned int first_seg_len = skb->len - skb->data_len;
|
|
struct netxen_skb_frag *buffrag;
|
|
unsigned int i;
|
|
|
|
u32 producer = 0;
|
|
u32 saved_producer = 0;
|
|
struct cmd_desc_type0 *hwdesc;
|
|
int k;
|
|
struct netxen_cmd_buffer *pbuf = NULL;
|
|
unsigned int tries = 0;
|
|
static int dropped_packet = 0;
|
|
int frag_count;
|
|
u32 local_producer = 0;
|
|
u32 max_tx_desc_count = 0;
|
|
u32 last_cmd_consumer = 0;
|
|
int no_of_desc;
|
|
|
|
port->stats.xmitcalled++;
|
|
frag_count = skb_shinfo(skb)->nr_frags + 1;
|
|
|
|
if (unlikely(skb->len <= 0)) {
|
|
dev_kfree_skb_any(skb);
|
|
port->stats.badskblen++;
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
if (frag_count > MAX_BUFFERS_PER_CMD) {
|
|
printk("%s: %s netxen_nic_xmit_frame: frag_count (%d)"
|
|
"too large, can handle only %d frags\n",
|
|
netxen_nic_driver_name, netdev->name,
|
|
frag_count, MAX_BUFFERS_PER_CMD);
|
|
port->stats.txdropped++;
|
|
if ((++dropped_packet & 0xff) == 0xff)
|
|
printk("%s: %s droppped packets = %d\n",
|
|
netxen_nic_driver_name, netdev->name,
|
|
dropped_packet);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*
|
|
* Everything is set up. Now, we just need to transmit it out.
|
|
* Note that we have to copy the contents of buffer over to
|
|
* right place. Later on, this can be optimized out by de-coupling the
|
|
* producer index from the buffer index.
|
|
*/
|
|
retry_getting_window:
|
|
spin_lock_bh(&adapter->tx_lock);
|
|
if (adapter->total_threads == MAX_XMIT_PRODUCERS) {
|
|
spin_unlock_bh(&adapter->tx_lock);
|
|
/*
|
|
* Yield CPU
|
|
*/
|
|
if (!in_atomic())
|
|
schedule();
|
|
else {
|
|
for (i = 0; i < 20; i++)
|
|
cpu_relax(); /*This a nop instr on i386 */
|
|
}
|
|
goto retry_getting_window;
|
|
}
|
|
local_producer = adapter->cmd_producer;
|
|
/* There 4 fragments per descriptor */
|
|
no_of_desc = (frag_count + 3) >> 2;
|
|
if (netdev->features & NETIF_F_TSO) {
|
|
if (skb_shinfo(skb)->gso_size > 0) {
|
|
|
|
no_of_desc++;
|
|
if (((skb->nh.iph)->ihl * sizeof(u32)) +
|
|
((skb->h.th)->doff * sizeof(u32)) +
|
|
sizeof(struct ethhdr) >
|
|
(sizeof(struct cmd_desc_type0) - NET_IP_ALIGN)) {
|
|
no_of_desc++;
|
|
}
|
|
}
|
|
}
|
|
k = adapter->cmd_producer;
|
|
max_tx_desc_count = adapter->max_tx_desc_count;
|
|
last_cmd_consumer = adapter->last_cmd_consumer;
|
|
if ((k + no_of_desc) >=
|
|
((last_cmd_consumer <= k) ? last_cmd_consumer + max_tx_desc_count :
|
|
last_cmd_consumer)) {
|
|
spin_unlock_bh(&adapter->tx_lock);
|
|
if (tries == 0) {
|
|
local_bh_disable();
|
|
netxen_process_cmd_ring((unsigned long)adapter);
|
|
local_bh_enable();
|
|
++tries;
|
|
goto retry_getting_window;
|
|
} else {
|
|
port->stats.nocmddescriptor++;
|
|
DPRINTK(ERR, "No command descriptors available,"
|
|
" producer = %d, consumer = %d count=%llu,"
|
|
" dropping packet\n", producer,
|
|
adapter->last_cmd_consumer,
|
|
port->stats.nocmddescriptor);
|
|
|
|
spin_lock_bh(&adapter->tx_lock);
|
|
netif_stop_queue(netdev);
|
|
port->flags |= NETXEN_NETDEV_STATUS;
|
|
spin_unlock_bh(&adapter->tx_lock);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
}
|
|
k = get_index_range(k, max_tx_desc_count, no_of_desc);
|
|
adapter->cmd_producer = k;
|
|
adapter->total_threads++;
|
|
adapter->num_threads++;
|
|
|
|
spin_unlock_bh(&adapter->tx_lock);
|
|
/* Copy the descriptors into the hardware */
|
|
producer = local_producer;
|
|
saved_producer = producer;
|
|
hwdesc = &hw->cmd_desc_head[producer];
|
|
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
|
|
/* Take skb->data itself */
|
|
pbuf = &adapter->cmd_buf_arr[producer];
|
|
if ((netdev->features & NETIF_F_TSO) && skb_shinfo(skb)->gso_size > 0) {
|
|
pbuf->mss = skb_shinfo(skb)->gso_size;
|
|
hwdesc->mss = skb_shinfo(skb)->gso_size;
|
|
} else {
|
|
pbuf->mss = 0;
|
|
hwdesc->mss = 0;
|
|
}
|
|
pbuf->no_of_descriptors = no_of_desc;
|
|
pbuf->total_length = skb->len;
|
|
pbuf->skb = skb;
|
|
pbuf->cmd = TX_ETHER_PKT;
|
|
pbuf->frag_count = frag_count;
|
|
pbuf->port = port->portnum;
|
|
buffrag = &pbuf->frag_array[0];
|
|
buffrag->dma = pci_map_single(port->pdev, skb->data, first_seg_len,
|
|
PCI_DMA_TODEVICE);
|
|
buffrag->length = first_seg_len;
|
|
CMD_DESC_TOTAL_LENGTH_WRT(hwdesc, skb->len);
|
|
hwdesc->num_of_buffers = frag_count;
|
|
hwdesc->opcode = TX_ETHER_PKT;
|
|
|
|
CMD_DESC_PORT_WRT(hwdesc, port->portnum);
|
|
hwdesc->buffer1_length = cpu_to_le16(first_seg_len);
|
|
hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
|
|
|
|
for (i = 1, k = 1; i < frag_count; i++, k++) {
|
|
struct skb_frag_struct *frag;
|
|
int len, temp_len;
|
|
unsigned long offset;
|
|
dma_addr_t temp_dma;
|
|
|
|
/* move to next desc. if there is a need */
|
|
if ((i & 0x3) == 0) {
|
|
k = 0;
|
|
producer = get_next_index(producer,
|
|
adapter->max_tx_desc_count);
|
|
hwdesc = &hw->cmd_desc_head[producer];
|
|
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
|
|
}
|
|
frag = &skb_shinfo(skb)->frags[i - 1];
|
|
len = frag->size;
|
|
offset = frag->page_offset;
|
|
|
|
temp_len = len;
|
|
temp_dma = pci_map_page(port->pdev, frag->page, offset,
|
|
len, PCI_DMA_TODEVICE);
|
|
|
|
buffrag++;
|
|
buffrag->dma = temp_dma;
|
|
buffrag->length = temp_len;
|
|
|
|
DPRINTK(INFO, "for loop. i=%d k=%d\n", i, k);
|
|
switch (k) {
|
|
case 0:
|
|
hwdesc->buffer1_length = cpu_to_le16(temp_len);
|
|
hwdesc->addr_buffer1 = cpu_to_le64(temp_dma);
|
|
break;
|
|
case 1:
|
|
hwdesc->buffer2_length = cpu_to_le16(temp_len);
|
|
hwdesc->addr_buffer2 = cpu_to_le64(temp_dma);
|
|
break;
|
|
case 2:
|
|
hwdesc->buffer3_length = cpu_to_le16(temp_len);
|
|
hwdesc->addr_buffer3 = cpu_to_le64(temp_dma);
|
|
break;
|
|
case 3:
|
|
hwdesc->buffer4_length = temp_len;
|
|
hwdesc->addr_buffer4 = cpu_to_le64(temp_dma);
|
|
break;
|
|
}
|
|
frag++;
|
|
}
|
|
producer = get_next_index(producer, adapter->max_tx_desc_count);
|
|
|
|
/* might change opcode to TX_TCP_LSO */
|
|
netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
|
|
|
|
/* For LSO, we need to copy the MAC/IP/TCP headers into
|
|
* the descriptor ring
|
|
*/
|
|
if (hw->cmd_desc_head[saved_producer].opcode == TX_TCP_LSO) {
|
|
int hdr_len, first_hdr_len, more_hdr;
|
|
hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length;
|
|
if (hdr_len > (sizeof(struct cmd_desc_type0) - NET_IP_ALIGN)) {
|
|
first_hdr_len =
|
|
sizeof(struct cmd_desc_type0) - NET_IP_ALIGN;
|
|
more_hdr = 1;
|
|
} else {
|
|
first_hdr_len = hdr_len;
|
|
more_hdr = 0;
|
|
}
|
|
/* copy the MAC/IP/TCP headers to the cmd descriptor list */
|
|
hwdesc = &hw->cmd_desc_head[producer];
|
|
|
|
/* copy the first 64 bytes */
|
|
memcpy(((void *)hwdesc) + NET_IP_ALIGN,
|
|
(void *)(skb->data), first_hdr_len);
|
|
producer = get_next_index(producer, max_tx_desc_count);
|
|
|
|
if (more_hdr) {
|
|
hwdesc = &hw->cmd_desc_head[producer];
|
|
/* copy the next 64 bytes - should be enough except
|
|
* for pathological case
|
|
*/
|
|
memcpy((void *)hwdesc, (void *)(skb->data) +
|
|
first_hdr_len, hdr_len - first_hdr_len);
|
|
producer = get_next_index(producer, max_tx_desc_count);
|
|
}
|
|
}
|
|
spin_lock_bh(&adapter->tx_lock);
|
|
port->stats.txbytes +=
|
|
CMD_DESC_TOTAL_LENGTH(&hw->cmd_desc_head[saved_producer]);
|
|
/* Code to update the adapter considering how many producer threads
|
|
are currently working */
|
|
if ((--adapter->num_threads) == 0) {
|
|
/* This is the last thread */
|
|
u32 crb_producer = adapter->cmd_producer;
|
|
writel(crb_producer,
|
|
NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_PRODUCER_OFFSET));
|
|
wmb();
|
|
adapter->total_threads = 0;
|
|
} else {
|
|
u32 crb_producer = 0;
|
|
crb_producer =
|
|
readl(NETXEN_CRB_NORMALIZE
|
|
(adapter, CRB_CMD_PRODUCER_OFFSET));
|
|
if (crb_producer == local_producer) {
|
|
crb_producer = get_index_range(crb_producer,
|
|
max_tx_desc_count,
|
|
no_of_desc);
|
|
writel(crb_producer,
|
|
NETXEN_CRB_NORMALIZE(adapter,
|
|
CRB_CMD_PRODUCER_OFFSET));
|
|
wmb();
|
|
}
|
|
}
|
|
|
|
port->stats.xmitfinished++;
|
|
spin_unlock_bh(&adapter->tx_lock);
|
|
|
|
netdev->trans_start = jiffies;
|
|
|
|
DPRINTK(INFO, "wrote CMD producer %x to phantom\n", producer);
|
|
|
|
DPRINTK(INFO, "Done. Send\n");
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void netxen_watchdog(unsigned long v)
|
|
{
|
|
struct netxen_adapter *adapter = (struct netxen_adapter *)v;
|
|
schedule_work(&adapter->watchdog_task);
|
|
}
|
|
|
|
static void netxen_tx_timeout(struct net_device *netdev)
|
|
{
|
|
struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev);
|
|
struct netxen_adapter *adapter = port->adapter;
|
|
|
|
schedule_work(&adapter->tx_timeout_task);
|
|
}
|
|
|
|
static void netxen_tx_timeout_task(struct net_device *netdev)
|
|
{
|
|
struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev);
|
|
unsigned long flags;
|
|
|
|
printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
|
|
netxen_nic_driver_name, netdev->name);
|
|
|
|
spin_lock_irqsave(&port->adapter->lock, flags);
|
|
netxen_nic_close(netdev);
|
|
netxen_nic_open(netdev);
|
|
spin_unlock_irqrestore(&port->adapter->lock, flags);
|
|
netdev->trans_start = jiffies;
|
|
netif_wake_queue(netdev);
|
|
}
|
|
|
|
static int
|
|
netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev)
|
|
{
|
|
u32 ret = 0;
|
|
|
|
DPRINTK(INFO, "Entered handle ISR\n");
|
|
|
|
adapter->stats.ints++;
|
|
|
|
if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
|
|
int count = 0;
|
|
u32 mask;
|
|
netxen_nic_disable_int(adapter);
|
|
/* Window = 0 or 1 */
|
|
do {
|
|
writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter,
|
|
ISR_INT_TARGET_STATUS));
|
|
mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR));
|
|
} while (((mask & 0x80) != 0) && (++count < 32));
|
|
if ((mask & 0x80) != 0)
|
|
printk("Could not disable interrupt completely\n");
|
|
|
|
}
|
|
adapter->stats.hostints++;
|
|
|
|
if (netxen_nic_rx_has_work(adapter) || netxen_nic_tx_has_work(adapter)) {
|
|
if (netif_rx_schedule_prep(netdev)) {
|
|
/*
|
|
* Interrupts are already disabled.
|
|
*/
|
|
__netif_rx_schedule(netdev);
|
|
} else {
|
|
static unsigned int intcount = 0;
|
|
if ((++intcount & 0xfff) == 0xfff)
|
|
printk(KERN_ERR
|
|
"%s: %s interrupt %d while in poll\n",
|
|
netxen_nic_driver_name, netdev->name,
|
|
intcount);
|
|
}
|
|
ret = 1;
|
|
}
|
|
|
|
if (ret == 0) {
|
|
netxen_nic_enable_int(adapter);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* netxen_intr - Interrupt Handler
|
|
* @irq: interrupt number
|
|
* data points to adapter stucture (which may be handling more than 1 port
|
|
*/
|
|
irqreturn_t netxen_intr(int irq, void *data)
|
|
{
|
|
struct netxen_adapter *adapter;
|
|
struct netxen_port *port;
|
|
struct net_device *netdev;
|
|
int i;
|
|
|
|
if (unlikely(!irq)) {
|
|
return IRQ_NONE; /* Not our interrupt */
|
|
}
|
|
|
|
adapter = (struct netxen_adapter *)data;
|
|
for (i = 0; i < adapter->ahw.max_ports; i++) {
|
|
port = adapter->port[i];
|
|
netdev = port->netdev;
|
|
|
|
/* process our status queue (for all 4 ports) */
|
|
netxen_handle_int(adapter, netdev);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int netxen_nic_poll(struct net_device *netdev, int *budget)
|
|
{
|
|
struct netxen_port *port = (struct netxen_port *)netdev_priv(netdev);
|
|
struct netxen_adapter *adapter = port->adapter;
|
|
int work_to_do = min(*budget, netdev->quota);
|
|
int done = 1;
|
|
int ctx;
|
|
int this_work_done;
|
|
|
|
DPRINTK(INFO, "polling for %d descriptors\n", *budget);
|
|
port->stats.polled++;
|
|
|
|
adapter->work_done = 0;
|
|
for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
|
|
/*
|
|
* Fairness issue. This will give undue weight to the
|
|
* receive context 0.
|
|
*/
|
|
|
|
/*
|
|
* To avoid starvation, we give each of our receivers,
|
|
* a fraction of the quota. Sometimes, it might happen that we
|
|
* have enough quota to process every packet, but since all the
|
|
* packets are on one context, it gets only half of the quota,
|
|
* and ends up not processing it.
|
|
*/
|
|
this_work_done = netxen_process_rcv_ring(adapter, ctx,
|
|
work_to_do /
|
|
MAX_RCV_CTX);
|
|
adapter->work_done += this_work_done;
|
|
}
|
|
|
|
netdev->quota -= adapter->work_done;
|
|
*budget -= adapter->work_done;
|
|
|
|
if (adapter->work_done >= work_to_do
|
|
&& netxen_nic_rx_has_work(adapter) != 0)
|
|
done = 0;
|
|
|
|
netxen_process_cmd_ring((unsigned long)adapter);
|
|
|
|
DPRINTK(INFO, "new work_done: %d work_to_do: %d\n",
|
|
adapter->work_done, work_to_do);
|
|
if (done) {
|
|
netif_rx_complete(netdev);
|
|
netxen_nic_enable_int(adapter);
|
|
}
|
|
|
|
return !done;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void netxen_nic_poll_controller(struct net_device *netdev)
|
|
{
|
|
struct netxen_port *port = netdev_priv(netdev);
|
|
struct netxen_adapter *adapter = port->adapter;
|
|
disable_irq(adapter->irq);
|
|
netxen_intr(adapter->irq, adapter);
|
|
enable_irq(adapter->irq);
|
|
}
|
|
#endif
|
|
/*
|
|
* netxen_nic_ioctl () We provide the tcl/phanmon support through these
|
|
* ioctls.
|
|
*/
|
|
static int
|
|
netxen_nic_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
|
{
|
|
int err = 0;
|
|
unsigned long nr_bytes = 0;
|
|
struct netxen_port *port = netdev_priv(netdev);
|
|
struct netxen_adapter *adapter = port->adapter;
|
|
char dev_name[NETXEN_NIC_NAME_LEN];
|
|
|
|
DPRINTK(INFO, "doing ioctl for %s\n", netdev->name);
|
|
switch (cmd) {
|
|
case NETXEN_NIC_CMD:
|
|
err = netxen_nic_do_ioctl(adapter, (void *)ifr->ifr_data, port);
|
|
break;
|
|
|
|
case NETXEN_NIC_NAME:
|
|
DPRINTK(INFO, "ioctl cmd for NetXen\n");
|
|
if (ifr->ifr_data) {
|
|
sprintf(dev_name, "%s-%d", NETXEN_NIC_NAME_RSP,
|
|
port->portnum);
|
|
nr_bytes = copy_to_user((char *)ifr->ifr_data, dev_name,
|
|
NETXEN_NIC_NAME_LEN);
|
|
if (nr_bytes)
|
|
err = -EIO;
|
|
|
|
}
|
|
break;
|
|
|
|
default:
|
|
DPRINTK(INFO, "ioctl cmd %x not supported\n", cmd);
|
|
err = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static struct pci_driver netxen_driver = {
|
|
.name = netxen_nic_driver_name,
|
|
.id_table = netxen_pci_tbl,
|
|
.probe = netxen_nic_probe,
|
|
.remove = __devexit_p(netxen_nic_remove)
|
|
};
|
|
|
|
/* Driver Registration on NetXen card */
|
|
|
|
static int __init netxen_init_module(void)
|
|
{
|
|
return pci_module_init(&netxen_driver);
|
|
}
|
|
|
|
module_init(netxen_init_module);
|
|
|
|
static void __exit netxen_exit_module(void)
|
|
{
|
|
/*
|
|
* Wait for some time to allow the dma to drain, if any.
|
|
*/
|
|
mdelay(5);
|
|
pci_unregister_driver(&netxen_driver);
|
|
}
|
|
|
|
module_exit(netxen_exit_module);
|