e903fbd41e
The intention behind the original patch: "iwlwifi: fix possible read attempt on ucode that is not available" was to exit before any state is changed. Due to its submission directly to 2.6.24 it was not clear how this relates to the latest iwlwifi work. This patch does exactly the same as the previous patch, just earlier to prevent any state from being changed if there is an error. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
9441 lines
264 KiB
C
9441 lines
264 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2003 - 2007 Intel Corporation. All rights reserved.
|
|
*
|
|
* Portions of this file are derived from the ipw3945 project, as well
|
|
* as portions of the ieee80211 subsystem header files.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/wireless.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_arp.h>
|
|
|
|
#include <net/mac80211.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include "iwl-4965.h"
|
|
#include "iwl-helpers.h"
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
u32 iwl4965_debug_level;
|
|
#endif
|
|
|
|
static int iwl4965_tx_queue_update_write_ptr(struct iwl4965_priv *priv,
|
|
struct iwl4965_tx_queue *txq);
|
|
|
|
/******************************************************************************
|
|
*
|
|
* module boiler plate
|
|
*
|
|
******************************************************************************/
|
|
|
|
/* module parameters */
|
|
static int iwl4965_param_disable_hw_scan; /* def: 0 = use 4965's h/w scan */
|
|
static int iwl4965_param_debug; /* def: 0 = minimal debug log messages */
|
|
static int iwl4965_param_disable; /* def: enable radio */
|
|
static int iwl4965_param_antenna; /* def: 0 = both antennas (use diversity) */
|
|
int iwl4965_param_hwcrypto; /* def: using software encryption */
|
|
static int iwl4965_param_qos_enable = 1; /* def: 1 = use quality of service */
|
|
int iwl4965_param_queues_num = IWL_MAX_NUM_QUEUES; /* def: 16 Tx queues */
|
|
int iwl4965_param_amsdu_size_8K; /* def: enable 8K amsdu size */
|
|
|
|
/*
|
|
* module name, copyright, version, etc.
|
|
* NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk
|
|
*/
|
|
|
|
#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link 4965AGN driver for Linux"
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
#define VD "d"
|
|
#else
|
|
#define VD
|
|
#endif
|
|
|
|
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
|
|
#define VS "s"
|
|
#else
|
|
#define VS
|
|
#endif
|
|
|
|
#define IWLWIFI_VERSION "1.2.23k" VD VS
|
|
#define DRV_COPYRIGHT "Copyright(c) 2003-2007 Intel Corporation"
|
|
#define DRV_VERSION IWLWIFI_VERSION
|
|
|
|
/* Change firmware file name, using "-" and incrementing number,
|
|
* *only* when uCode interface or architecture changes so that it
|
|
* is not compatible with earlier drivers.
|
|
* This number will also appear in << 8 position of 1st dword of uCode file */
|
|
#define IWL4965_UCODE_API "-1"
|
|
|
|
MODULE_DESCRIPTION(DRV_DESCRIPTION);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_AUTHOR(DRV_COPYRIGHT);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
__le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr)
|
|
{
|
|
u16 fc = le16_to_cpu(hdr->frame_control);
|
|
int hdr_len = ieee80211_get_hdrlen(fc);
|
|
|
|
if ((fc & 0x00cc) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA))
|
|
return (__le16 *) ((u8 *) hdr + hdr_len - QOS_CONTROL_LEN);
|
|
return NULL;
|
|
}
|
|
|
|
static const struct ieee80211_hw_mode *iwl4965_get_hw_mode(
|
|
struct iwl4965_priv *priv, int mode)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
if (priv->modes[i].mode == mode)
|
|
return &priv->modes[i];
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int iwl4965_is_empty_essid(const char *essid, int essid_len)
|
|
{
|
|
/* Single white space is for Linksys APs */
|
|
if (essid_len == 1 && essid[0] == ' ')
|
|
return 1;
|
|
|
|
/* Otherwise, if the entire essid is 0, we assume it is hidden */
|
|
while (essid_len) {
|
|
essid_len--;
|
|
if (essid[essid_len] != '\0')
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const char *iwl4965_escape_essid(const char *essid, u8 essid_len)
|
|
{
|
|
static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
|
|
const char *s = essid;
|
|
char *d = escaped;
|
|
|
|
if (iwl4965_is_empty_essid(essid, essid_len)) {
|
|
memcpy(escaped, "<hidden>", sizeof("<hidden>"));
|
|
return escaped;
|
|
}
|
|
|
|
essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
|
|
while (essid_len--) {
|
|
if (*s == '\0') {
|
|
*d++ = '\\';
|
|
*d++ = '0';
|
|
s++;
|
|
} else
|
|
*d++ = *s++;
|
|
}
|
|
*d = '\0';
|
|
return escaped;
|
|
}
|
|
|
|
static void iwl4965_print_hex_dump(int level, void *p, u32 len)
|
|
{
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
if (!(iwl4965_debug_level & level))
|
|
return;
|
|
|
|
print_hex_dump(KERN_DEBUG, "iwl data: ", DUMP_PREFIX_OFFSET, 16, 1,
|
|
p, len, 1);
|
|
#endif
|
|
}
|
|
|
|
/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
|
|
* DMA services
|
|
*
|
|
* Theory of operation
|
|
*
|
|
* A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
|
|
* of buffer descriptors, each of which points to one or more data buffers for
|
|
* the device to read from or fill. Driver and device exchange status of each
|
|
* queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
|
|
* entries in each circular buffer, to protect against confusing empty and full
|
|
* queue states.
|
|
*
|
|
* The device reads or writes the data in the queues via the device's several
|
|
* DMA/FIFO channels. Each queue is mapped to a single DMA channel.
|
|
*
|
|
* For Tx queue, there are low mark and high mark limits. If, after queuing
|
|
* the packet for Tx, free space become < low mark, Tx queue stopped. When
|
|
* reclaiming packets (on 'tx done IRQ), if free space become > high mark,
|
|
* Tx queue resumed.
|
|
*
|
|
* The 4965 operates with up to 17 queues: One receive queue, one transmit
|
|
* queue (#4) for sending commands to the device firmware, and 15 other
|
|
* Tx queues that may be mapped to prioritized Tx DMA/FIFO channels.
|
|
*
|
|
* See more detailed info in iwl-4965-hw.h.
|
|
***************************************************/
|
|
|
|
static int iwl4965_queue_space(const struct iwl4965_queue *q)
|
|
{
|
|
int s = q->read_ptr - q->write_ptr;
|
|
|
|
if (q->read_ptr > q->write_ptr)
|
|
s -= q->n_bd;
|
|
|
|
if (s <= 0)
|
|
s += q->n_window;
|
|
/* keep some reserve to not confuse empty and full situations */
|
|
s -= 2;
|
|
if (s < 0)
|
|
s = 0;
|
|
return s;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_queue_inc_wrap - increment queue index, wrap back to beginning
|
|
* @index -- current index
|
|
* @n_bd -- total number of entries in queue (must be power of 2)
|
|
*/
|
|
static inline int iwl4965_queue_inc_wrap(int index, int n_bd)
|
|
{
|
|
return ++index & (n_bd - 1);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_queue_dec_wrap - decrement queue index, wrap back to end
|
|
* @index -- current index
|
|
* @n_bd -- total number of entries in queue (must be power of 2)
|
|
*/
|
|
static inline int iwl4965_queue_dec_wrap(int index, int n_bd)
|
|
{
|
|
return --index & (n_bd - 1);
|
|
}
|
|
|
|
static inline int x2_queue_used(const struct iwl4965_queue *q, int i)
|
|
{
|
|
return q->write_ptr > q->read_ptr ?
|
|
(i >= q->read_ptr && i < q->write_ptr) :
|
|
!(i < q->read_ptr && i >= q->write_ptr);
|
|
}
|
|
|
|
static inline u8 get_cmd_index(struct iwl4965_queue *q, u32 index, int is_huge)
|
|
{
|
|
/* This is for scan command, the big buffer at end of command array */
|
|
if (is_huge)
|
|
return q->n_window; /* must be power of 2 */
|
|
|
|
/* Otherwise, use normal size buffers */
|
|
return index & (q->n_window - 1);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_queue_init - Initialize queue's high/low-water and read/write indexes
|
|
*/
|
|
static int iwl4965_queue_init(struct iwl4965_priv *priv, struct iwl4965_queue *q,
|
|
int count, int slots_num, u32 id)
|
|
{
|
|
q->n_bd = count;
|
|
q->n_window = slots_num;
|
|
q->id = id;
|
|
|
|
/* count must be power-of-two size, otherwise iwl4965_queue_inc_wrap
|
|
* and iwl4965_queue_dec_wrap are broken. */
|
|
BUG_ON(!is_power_of_2(count));
|
|
|
|
/* slots_num must be power-of-two size, otherwise
|
|
* get_cmd_index is broken. */
|
|
BUG_ON(!is_power_of_2(slots_num));
|
|
|
|
q->low_mark = q->n_window / 4;
|
|
if (q->low_mark < 4)
|
|
q->low_mark = 4;
|
|
|
|
q->high_mark = q->n_window / 8;
|
|
if (q->high_mark < 2)
|
|
q->high_mark = 2;
|
|
|
|
q->write_ptr = q->read_ptr = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
|
|
*/
|
|
static int iwl4965_tx_queue_alloc(struct iwl4965_priv *priv,
|
|
struct iwl4965_tx_queue *txq, u32 id)
|
|
{
|
|
struct pci_dev *dev = priv->pci_dev;
|
|
|
|
/* Driver private data, only for Tx (not command) queues,
|
|
* not shared with device. */
|
|
if (id != IWL_CMD_QUEUE_NUM) {
|
|
txq->txb = kmalloc(sizeof(txq->txb[0]) *
|
|
TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
|
|
if (!txq->txb) {
|
|
IWL_ERROR("kmalloc for auxiliary BD "
|
|
"structures failed\n");
|
|
goto error;
|
|
}
|
|
} else
|
|
txq->txb = NULL;
|
|
|
|
/* Circular buffer of transmit frame descriptors (TFDs),
|
|
* shared with device */
|
|
txq->bd = pci_alloc_consistent(dev,
|
|
sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX,
|
|
&txq->q.dma_addr);
|
|
|
|
if (!txq->bd) {
|
|
IWL_ERROR("pci_alloc_consistent(%zd) failed\n",
|
|
sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX);
|
|
goto error;
|
|
}
|
|
txq->q.id = id;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
if (txq->txb) {
|
|
kfree(txq->txb);
|
|
txq->txb = NULL;
|
|
}
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_queue_init - Allocate and initialize one tx/cmd queue
|
|
*/
|
|
int iwl4965_tx_queue_init(struct iwl4965_priv *priv,
|
|
struct iwl4965_tx_queue *txq, int slots_num, u32 txq_id)
|
|
{
|
|
struct pci_dev *dev = priv->pci_dev;
|
|
int len;
|
|
int rc = 0;
|
|
|
|
/*
|
|
* Alloc buffer array for commands (Tx or other types of commands).
|
|
* For the command queue (#4), allocate command space + one big
|
|
* command for scan, since scan command is very huge; the system will
|
|
* not have two scans at the same time, so only one is needed.
|
|
* For normal Tx queues (all other queues), no super-size command
|
|
* space is needed.
|
|
*/
|
|
len = sizeof(struct iwl4965_cmd) * slots_num;
|
|
if (txq_id == IWL_CMD_QUEUE_NUM)
|
|
len += IWL_MAX_SCAN_SIZE;
|
|
txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd);
|
|
if (!txq->cmd)
|
|
return -ENOMEM;
|
|
|
|
/* Alloc driver data array and TFD circular buffer */
|
|
rc = iwl4965_tx_queue_alloc(priv, txq, txq_id);
|
|
if (rc) {
|
|
pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
txq->need_update = 0;
|
|
|
|
/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
|
|
* iwl4965_queue_inc_wrap and iwl4965_queue_dec_wrap are broken. */
|
|
BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
|
|
|
|
/* Initialize queue's high/low-water marks, and head/tail indexes */
|
|
iwl4965_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
|
|
|
|
/* Tell device where to find queue */
|
|
iwl4965_hw_tx_queue_init(priv, txq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_queue_free - Deallocate DMA queue.
|
|
* @txq: Transmit queue to deallocate.
|
|
*
|
|
* Empty queue by removing and destroying all BD's.
|
|
* Free all buffers.
|
|
* 0-fill, but do not free "txq" descriptor structure.
|
|
*/
|
|
void iwl4965_tx_queue_free(struct iwl4965_priv *priv, struct iwl4965_tx_queue *txq)
|
|
{
|
|
struct iwl4965_queue *q = &txq->q;
|
|
struct pci_dev *dev = priv->pci_dev;
|
|
int len;
|
|
|
|
if (q->n_bd == 0)
|
|
return;
|
|
|
|
/* first, empty all BD's */
|
|
for (; q->write_ptr != q->read_ptr;
|
|
q->read_ptr = iwl4965_queue_inc_wrap(q->read_ptr, q->n_bd))
|
|
iwl4965_hw_txq_free_tfd(priv, txq);
|
|
|
|
len = sizeof(struct iwl4965_cmd) * q->n_window;
|
|
if (q->id == IWL_CMD_QUEUE_NUM)
|
|
len += IWL_MAX_SCAN_SIZE;
|
|
|
|
/* De-alloc array of command/tx buffers */
|
|
pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
|
|
|
|
/* De-alloc circular buffer of TFDs */
|
|
if (txq->q.n_bd)
|
|
pci_free_consistent(dev, sizeof(struct iwl4965_tfd_frame) *
|
|
txq->q.n_bd, txq->bd, txq->q.dma_addr);
|
|
|
|
/* De-alloc array of per-TFD driver data */
|
|
if (txq->txb) {
|
|
kfree(txq->txb);
|
|
txq->txb = NULL;
|
|
}
|
|
|
|
/* 0-fill queue descriptor structure */
|
|
memset(txq, 0, sizeof(*txq));
|
|
}
|
|
|
|
const u8 iwl4965_broadcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
|
|
|
|
/*************** STATION TABLE MANAGEMENT ****
|
|
* mac80211 should be examined to determine if sta_info is duplicating
|
|
* the functionality provided here
|
|
*/
|
|
|
|
/**************************************************************/
|
|
|
|
#if 0 /* temporary disable till we add real remove station */
|
|
/**
|
|
* iwl4965_remove_station - Remove driver's knowledge of station.
|
|
*
|
|
* NOTE: This does not remove station from device's station table.
|
|
*/
|
|
static u8 iwl4965_remove_station(struct iwl4965_priv *priv, const u8 *addr, int is_ap)
|
|
{
|
|
int index = IWL_INVALID_STATION;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
|
|
if (is_ap)
|
|
index = IWL_AP_ID;
|
|
else if (is_broadcast_ether_addr(addr))
|
|
index = priv->hw_setting.bcast_sta_id;
|
|
else
|
|
for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++)
|
|
if (priv->stations[i].used &&
|
|
!compare_ether_addr(priv->stations[i].sta.sta.addr,
|
|
addr)) {
|
|
index = i;
|
|
break;
|
|
}
|
|
|
|
if (unlikely(index == IWL_INVALID_STATION))
|
|
goto out;
|
|
|
|
if (priv->stations[index].used) {
|
|
priv->stations[index].used = 0;
|
|
priv->num_stations--;
|
|
}
|
|
|
|
BUG_ON(priv->num_stations < 0);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* iwl4965_clear_stations_table - Clear the driver's station table
|
|
*
|
|
* NOTE: This does not clear or otherwise alter the device's station table.
|
|
*/
|
|
static void iwl4965_clear_stations_table(struct iwl4965_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
|
|
priv->num_stations = 0;
|
|
memset(priv->stations, 0, sizeof(priv->stations));
|
|
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_add_station_flags - Add station to tables in driver and device
|
|
*/
|
|
u8 iwl4965_add_station_flags(struct iwl4965_priv *priv, const u8 *addr,
|
|
int is_ap, u8 flags, void *ht_data)
|
|
{
|
|
int i;
|
|
int index = IWL_INVALID_STATION;
|
|
struct iwl4965_station_entry *station;
|
|
unsigned long flags_spin;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags_spin);
|
|
if (is_ap)
|
|
index = IWL_AP_ID;
|
|
else if (is_broadcast_ether_addr(addr))
|
|
index = priv->hw_setting.bcast_sta_id;
|
|
else
|
|
for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++) {
|
|
if (!compare_ether_addr(priv->stations[i].sta.sta.addr,
|
|
addr)) {
|
|
index = i;
|
|
break;
|
|
}
|
|
|
|
if (!priv->stations[i].used &&
|
|
index == IWL_INVALID_STATION)
|
|
index = i;
|
|
}
|
|
|
|
|
|
/* These two conditions have the same outcome, but keep them separate
|
|
since they have different meanings */
|
|
if (unlikely(index == IWL_INVALID_STATION)) {
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
|
|
return index;
|
|
}
|
|
|
|
if (priv->stations[index].used &&
|
|
!compare_ether_addr(priv->stations[index].sta.sta.addr, addr)) {
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
|
|
return index;
|
|
}
|
|
|
|
|
|
IWL_DEBUG_ASSOC("Add STA ID %d: %s\n", index, print_mac(mac, addr));
|
|
station = &priv->stations[index];
|
|
station->used = 1;
|
|
priv->num_stations++;
|
|
|
|
/* Set up the REPLY_ADD_STA command to send to device */
|
|
memset(&station->sta, 0, sizeof(struct iwl4965_addsta_cmd));
|
|
memcpy(station->sta.sta.addr, addr, ETH_ALEN);
|
|
station->sta.mode = 0;
|
|
station->sta.sta.sta_id = index;
|
|
station->sta.station_flags = 0;
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
/* BCAST station and IBSS stations do not work in HT mode */
|
|
if (index != priv->hw_setting.bcast_sta_id &&
|
|
priv->iw_mode != IEEE80211_IF_TYPE_IBSS)
|
|
iwl4965_set_ht_add_station(priv, index,
|
|
(struct ieee80211_ht_info *) ht_data);
|
|
#endif /*CONFIG_IWL4965_HT*/
|
|
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
|
|
|
|
/* Add station to device's station table */
|
|
iwl4965_send_add_station(priv, &station->sta, flags);
|
|
return index;
|
|
|
|
}
|
|
|
|
/*************** DRIVER STATUS FUNCTIONS *****/
|
|
|
|
static inline int iwl4965_is_ready(struct iwl4965_priv *priv)
|
|
{
|
|
/* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
|
|
* set but EXIT_PENDING is not */
|
|
return test_bit(STATUS_READY, &priv->status) &&
|
|
test_bit(STATUS_GEO_CONFIGURED, &priv->status) &&
|
|
!test_bit(STATUS_EXIT_PENDING, &priv->status);
|
|
}
|
|
|
|
static inline int iwl4965_is_alive(struct iwl4965_priv *priv)
|
|
{
|
|
return test_bit(STATUS_ALIVE, &priv->status);
|
|
}
|
|
|
|
static inline int iwl4965_is_init(struct iwl4965_priv *priv)
|
|
{
|
|
return test_bit(STATUS_INIT, &priv->status);
|
|
}
|
|
|
|
static inline int iwl4965_is_rfkill(struct iwl4965_priv *priv)
|
|
{
|
|
return test_bit(STATUS_RF_KILL_HW, &priv->status) ||
|
|
test_bit(STATUS_RF_KILL_SW, &priv->status);
|
|
}
|
|
|
|
static inline int iwl4965_is_ready_rf(struct iwl4965_priv *priv)
|
|
{
|
|
|
|
if (iwl4965_is_rfkill(priv))
|
|
return 0;
|
|
|
|
return iwl4965_is_ready(priv);
|
|
}
|
|
|
|
/*************** HOST COMMAND QUEUE FUNCTIONS *****/
|
|
|
|
#define IWL_CMD(x) case x : return #x
|
|
|
|
static const char *get_cmd_string(u8 cmd)
|
|
{
|
|
switch (cmd) {
|
|
IWL_CMD(REPLY_ALIVE);
|
|
IWL_CMD(REPLY_ERROR);
|
|
IWL_CMD(REPLY_RXON);
|
|
IWL_CMD(REPLY_RXON_ASSOC);
|
|
IWL_CMD(REPLY_QOS_PARAM);
|
|
IWL_CMD(REPLY_RXON_TIMING);
|
|
IWL_CMD(REPLY_ADD_STA);
|
|
IWL_CMD(REPLY_REMOVE_STA);
|
|
IWL_CMD(REPLY_REMOVE_ALL_STA);
|
|
IWL_CMD(REPLY_TX);
|
|
IWL_CMD(REPLY_RATE_SCALE);
|
|
IWL_CMD(REPLY_LEDS_CMD);
|
|
IWL_CMD(REPLY_TX_LINK_QUALITY_CMD);
|
|
IWL_CMD(RADAR_NOTIFICATION);
|
|
IWL_CMD(REPLY_QUIET_CMD);
|
|
IWL_CMD(REPLY_CHANNEL_SWITCH);
|
|
IWL_CMD(CHANNEL_SWITCH_NOTIFICATION);
|
|
IWL_CMD(REPLY_SPECTRUM_MEASUREMENT_CMD);
|
|
IWL_CMD(SPECTRUM_MEASURE_NOTIFICATION);
|
|
IWL_CMD(POWER_TABLE_CMD);
|
|
IWL_CMD(PM_SLEEP_NOTIFICATION);
|
|
IWL_CMD(PM_DEBUG_STATISTIC_NOTIFIC);
|
|
IWL_CMD(REPLY_SCAN_CMD);
|
|
IWL_CMD(REPLY_SCAN_ABORT_CMD);
|
|
IWL_CMD(SCAN_START_NOTIFICATION);
|
|
IWL_CMD(SCAN_RESULTS_NOTIFICATION);
|
|
IWL_CMD(SCAN_COMPLETE_NOTIFICATION);
|
|
IWL_CMD(BEACON_NOTIFICATION);
|
|
IWL_CMD(REPLY_TX_BEACON);
|
|
IWL_CMD(WHO_IS_AWAKE_NOTIFICATION);
|
|
IWL_CMD(QUIET_NOTIFICATION);
|
|
IWL_CMD(REPLY_TX_PWR_TABLE_CMD);
|
|
IWL_CMD(MEASURE_ABORT_NOTIFICATION);
|
|
IWL_CMD(REPLY_BT_CONFIG);
|
|
IWL_CMD(REPLY_STATISTICS_CMD);
|
|
IWL_CMD(STATISTICS_NOTIFICATION);
|
|
IWL_CMD(REPLY_CARD_STATE_CMD);
|
|
IWL_CMD(CARD_STATE_NOTIFICATION);
|
|
IWL_CMD(MISSED_BEACONS_NOTIFICATION);
|
|
IWL_CMD(REPLY_CT_KILL_CONFIG_CMD);
|
|
IWL_CMD(SENSITIVITY_CMD);
|
|
IWL_CMD(REPLY_PHY_CALIBRATION_CMD);
|
|
IWL_CMD(REPLY_RX_PHY_CMD);
|
|
IWL_CMD(REPLY_RX_MPDU_CMD);
|
|
IWL_CMD(REPLY_4965_RX);
|
|
IWL_CMD(REPLY_COMPRESSED_BA);
|
|
default:
|
|
return "UNKNOWN";
|
|
|
|
}
|
|
}
|
|
|
|
#define HOST_COMPLETE_TIMEOUT (HZ / 2)
|
|
|
|
/**
|
|
* iwl4965_enqueue_hcmd - enqueue a uCode command
|
|
* @priv: device private data point
|
|
* @cmd: a point to the ucode command structure
|
|
*
|
|
* The function returns < 0 values to indicate the operation is
|
|
* failed. On success, it turns the index (> 0) of command in the
|
|
* command queue.
|
|
*/
|
|
static int iwl4965_enqueue_hcmd(struct iwl4965_priv *priv, struct iwl4965_host_cmd *cmd)
|
|
{
|
|
struct iwl4965_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
|
|
struct iwl4965_queue *q = &txq->q;
|
|
struct iwl4965_tfd_frame *tfd;
|
|
u32 *control_flags;
|
|
struct iwl4965_cmd *out_cmd;
|
|
u32 idx;
|
|
u16 fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
|
|
dma_addr_t phys_addr;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
/* If any of the command structures end up being larger than
|
|
* the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
|
|
* we will need to increase the size of the TFD entries */
|
|
BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
|
|
!(cmd->meta.flags & CMD_SIZE_HUGE));
|
|
|
|
if (iwl4965_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
|
|
IWL_ERROR("No space for Tx\n");
|
|
return -ENOSPC;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->hcmd_lock, flags);
|
|
|
|
tfd = &txq->bd[q->write_ptr];
|
|
memset(tfd, 0, sizeof(*tfd));
|
|
|
|
control_flags = (u32 *) tfd;
|
|
|
|
idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE);
|
|
out_cmd = &txq->cmd[idx];
|
|
|
|
out_cmd->hdr.cmd = cmd->id;
|
|
memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta));
|
|
memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
|
|
|
|
/* At this point, the out_cmd now has all of the incoming cmd
|
|
* information */
|
|
|
|
out_cmd->hdr.flags = 0;
|
|
out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) |
|
|
INDEX_TO_SEQ(q->write_ptr));
|
|
if (out_cmd->meta.flags & CMD_SIZE_HUGE)
|
|
out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME);
|
|
|
|
phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx +
|
|
offsetof(struct iwl4965_cmd, hdr);
|
|
iwl4965_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size);
|
|
|
|
IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
|
|
"%d bytes at %d[%d]:%d\n",
|
|
get_cmd_string(out_cmd->hdr.cmd),
|
|
out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
|
|
fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
|
|
|
|
txq->need_update = 1;
|
|
|
|
/* Set up entry in queue's byte count circular buffer */
|
|
ret = iwl4965_tx_queue_update_wr_ptr(priv, txq, 0);
|
|
|
|
/* Increment and update queue's write index */
|
|
q->write_ptr = iwl4965_queue_inc_wrap(q->write_ptr, q->n_bd);
|
|
iwl4965_tx_queue_update_write_ptr(priv, txq);
|
|
|
|
spin_unlock_irqrestore(&priv->hcmd_lock, flags);
|
|
return ret ? ret : idx;
|
|
}
|
|
|
|
static int iwl4965_send_cmd_async(struct iwl4965_priv *priv, struct iwl4965_host_cmd *cmd)
|
|
{
|
|
int ret;
|
|
|
|
BUG_ON(!(cmd->meta.flags & CMD_ASYNC));
|
|
|
|
/* An asynchronous command can not expect an SKB to be set. */
|
|
BUG_ON(cmd->meta.flags & CMD_WANT_SKB);
|
|
|
|
/* An asynchronous command MUST have a callback. */
|
|
BUG_ON(!cmd->meta.u.callback);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return -EBUSY;
|
|
|
|
ret = iwl4965_enqueue_hcmd(priv, cmd);
|
|
if (ret < 0) {
|
|
IWL_ERROR("Error sending %s: iwl4965_enqueue_hcmd failed: %d\n",
|
|
get_cmd_string(cmd->id), ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_send_cmd_sync(struct iwl4965_priv *priv, struct iwl4965_host_cmd *cmd)
|
|
{
|
|
int cmd_idx;
|
|
int ret;
|
|
static atomic_t entry = ATOMIC_INIT(0); /* reentrance protection */
|
|
|
|
BUG_ON(cmd->meta.flags & CMD_ASYNC);
|
|
|
|
/* A synchronous command can not have a callback set. */
|
|
BUG_ON(cmd->meta.u.callback != NULL);
|
|
|
|
if (atomic_xchg(&entry, 1)) {
|
|
IWL_ERROR("Error sending %s: Already sending a host command\n",
|
|
get_cmd_string(cmd->id));
|
|
return -EBUSY;
|
|
}
|
|
|
|
set_bit(STATUS_HCMD_ACTIVE, &priv->status);
|
|
|
|
if (cmd->meta.flags & CMD_WANT_SKB)
|
|
cmd->meta.source = &cmd->meta;
|
|
|
|
cmd_idx = iwl4965_enqueue_hcmd(priv, cmd);
|
|
if (cmd_idx < 0) {
|
|
ret = cmd_idx;
|
|
IWL_ERROR("Error sending %s: iwl4965_enqueue_hcmd failed: %d\n",
|
|
get_cmd_string(cmd->id), ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = wait_event_interruptible_timeout(priv->wait_command_queue,
|
|
!test_bit(STATUS_HCMD_ACTIVE, &priv->status),
|
|
HOST_COMPLETE_TIMEOUT);
|
|
if (!ret) {
|
|
if (test_bit(STATUS_HCMD_ACTIVE, &priv->status)) {
|
|
IWL_ERROR("Error sending %s: time out after %dms.\n",
|
|
get_cmd_string(cmd->id),
|
|
jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
|
|
|
|
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
|
|
ret = -ETIMEDOUT;
|
|
goto cancel;
|
|
}
|
|
}
|
|
|
|
if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
|
|
IWL_DEBUG_INFO("Command %s aborted: RF KILL Switch\n",
|
|
get_cmd_string(cmd->id));
|
|
ret = -ECANCELED;
|
|
goto fail;
|
|
}
|
|
if (test_bit(STATUS_FW_ERROR, &priv->status)) {
|
|
IWL_DEBUG_INFO("Command %s failed: FW Error\n",
|
|
get_cmd_string(cmd->id));
|
|
ret = -EIO;
|
|
goto fail;
|
|
}
|
|
if ((cmd->meta.flags & CMD_WANT_SKB) && !cmd->meta.u.skb) {
|
|
IWL_ERROR("Error: Response NULL in '%s'\n",
|
|
get_cmd_string(cmd->id));
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
ret = 0;
|
|
goto out;
|
|
|
|
cancel:
|
|
if (cmd->meta.flags & CMD_WANT_SKB) {
|
|
struct iwl4965_cmd *qcmd;
|
|
|
|
/* Cancel the CMD_WANT_SKB flag for the cmd in the
|
|
* TX cmd queue. Otherwise in case the cmd comes
|
|
* in later, it will possibly set an invalid
|
|
* address (cmd->meta.source). */
|
|
qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
|
|
qcmd->meta.flags &= ~CMD_WANT_SKB;
|
|
}
|
|
fail:
|
|
if (cmd->meta.u.skb) {
|
|
dev_kfree_skb_any(cmd->meta.u.skb);
|
|
cmd->meta.u.skb = NULL;
|
|
}
|
|
out:
|
|
atomic_set(&entry, 0);
|
|
return ret;
|
|
}
|
|
|
|
int iwl4965_send_cmd(struct iwl4965_priv *priv, struct iwl4965_host_cmd *cmd)
|
|
{
|
|
if (cmd->meta.flags & CMD_ASYNC)
|
|
return iwl4965_send_cmd_async(priv, cmd);
|
|
|
|
return iwl4965_send_cmd_sync(priv, cmd);
|
|
}
|
|
|
|
int iwl4965_send_cmd_pdu(struct iwl4965_priv *priv, u8 id, u16 len, const void *data)
|
|
{
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = id,
|
|
.len = len,
|
|
.data = data,
|
|
};
|
|
|
|
return iwl4965_send_cmd_sync(priv, &cmd);
|
|
}
|
|
|
|
static int __must_check iwl4965_send_cmd_u32(struct iwl4965_priv *priv, u8 id, u32 val)
|
|
{
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = id,
|
|
.len = sizeof(val),
|
|
.data = &val,
|
|
};
|
|
|
|
return iwl4965_send_cmd_sync(priv, &cmd);
|
|
}
|
|
|
|
int iwl4965_send_statistics_request(struct iwl4965_priv *priv)
|
|
{
|
|
return iwl4965_send_cmd_u32(priv, REPLY_STATISTICS_CMD, 0);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_rxon_add_station - add station into station table.
|
|
*
|
|
* there is only one AP station with id= IWL_AP_ID
|
|
* NOTE: mutex must be held before calling this fnction
|
|
*/
|
|
static int iwl4965_rxon_add_station(struct iwl4965_priv *priv,
|
|
const u8 *addr, int is_ap)
|
|
{
|
|
u8 sta_id;
|
|
|
|
/* Add station to device's station table */
|
|
#ifdef CONFIG_IWL4965_HT
|
|
struct ieee80211_conf *conf = &priv->hw->conf;
|
|
struct ieee80211_ht_info *cur_ht_config = &conf->ht_conf;
|
|
|
|
if ((is_ap) &&
|
|
(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
|
|
(priv->iw_mode == IEEE80211_IF_TYPE_STA))
|
|
sta_id = iwl4965_add_station_flags(priv, addr, is_ap,
|
|
0, cur_ht_config);
|
|
else
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
sta_id = iwl4965_add_station_flags(priv, addr, is_ap,
|
|
0, NULL);
|
|
|
|
/* Set up default rate scaling table in device's station table */
|
|
iwl4965_add_station(priv, addr, is_ap);
|
|
|
|
return sta_id;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_set_rxon_channel - Set the phymode and channel values in staging RXON
|
|
* @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
|
|
* @channel: Any channel valid for the requested phymode
|
|
|
|
* In addition to setting the staging RXON, priv->phymode is also set.
|
|
*
|
|
* NOTE: Does not commit to the hardware; it sets appropriate bit fields
|
|
* in the staging RXON flag structure based on the phymode
|
|
*/
|
|
static int iwl4965_set_rxon_channel(struct iwl4965_priv *priv, u8 phymode,
|
|
u16 channel)
|
|
{
|
|
if (!iwl4965_get_channel_info(priv, phymode, channel)) {
|
|
IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
|
|
channel, phymode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
|
|
(priv->phymode == phymode))
|
|
return 0;
|
|
|
|
priv->staging_rxon.channel = cpu_to_le16(channel);
|
|
if (phymode == MODE_IEEE80211A)
|
|
priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
|
|
else
|
|
priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
|
|
|
|
priv->phymode = phymode;
|
|
|
|
IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, phymode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_check_rxon_cmd - validate RXON structure is valid
|
|
*
|
|
* NOTE: This is really only useful during development and can eventually
|
|
* be #ifdef'd out once the driver is stable and folks aren't actively
|
|
* making changes
|
|
*/
|
|
static int iwl4965_check_rxon_cmd(struct iwl4965_rxon_cmd *rxon)
|
|
{
|
|
int error = 0;
|
|
int counter = 1;
|
|
|
|
if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
|
|
error |= le32_to_cpu(rxon->flags &
|
|
(RXON_FLG_TGJ_NARROW_BAND_MSK |
|
|
RXON_FLG_RADAR_DETECT_MSK));
|
|
if (error)
|
|
IWL_WARNING("check 24G fields %d | %d\n",
|
|
counter++, error);
|
|
} else {
|
|
error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
|
|
0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
|
|
if (error)
|
|
IWL_WARNING("check 52 fields %d | %d\n",
|
|
counter++, error);
|
|
error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
|
|
if (error)
|
|
IWL_WARNING("check 52 CCK %d | %d\n",
|
|
counter++, error);
|
|
}
|
|
error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
|
|
if (error)
|
|
IWL_WARNING("check mac addr %d | %d\n", counter++, error);
|
|
|
|
/* make sure basic rates 6Mbps and 1Mbps are supported */
|
|
error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
|
|
((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
|
|
if (error)
|
|
IWL_WARNING("check basic rate %d | %d\n", counter++, error);
|
|
|
|
error |= (le16_to_cpu(rxon->assoc_id) > 2007);
|
|
if (error)
|
|
IWL_WARNING("check assoc id %d | %d\n", counter++, error);
|
|
|
|
error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
|
|
== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
|
|
if (error)
|
|
IWL_WARNING("check CCK and short slot %d | %d\n",
|
|
counter++, error);
|
|
|
|
error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
|
|
== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
|
|
if (error)
|
|
IWL_WARNING("check CCK & auto detect %d | %d\n",
|
|
counter++, error);
|
|
|
|
error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
|
|
RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
|
|
if (error)
|
|
IWL_WARNING("check TGG and auto detect %d | %d\n",
|
|
counter++, error);
|
|
|
|
if (error)
|
|
IWL_WARNING("Tuning to channel %d\n",
|
|
le16_to_cpu(rxon->channel));
|
|
|
|
if (error) {
|
|
IWL_ERROR("Not a valid iwl4965_rxon_assoc_cmd field values\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
|
|
* @priv: staging_rxon is compared to active_rxon
|
|
*
|
|
* If the RXON structure is changing enough to require a new tune,
|
|
* or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
|
|
* a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
|
|
*/
|
|
static int iwl4965_full_rxon_required(struct iwl4965_priv *priv)
|
|
{
|
|
|
|
/* These items are only settable from the full RXON command */
|
|
if (!(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ||
|
|
compare_ether_addr(priv->staging_rxon.bssid_addr,
|
|
priv->active_rxon.bssid_addr) ||
|
|
compare_ether_addr(priv->staging_rxon.node_addr,
|
|
priv->active_rxon.node_addr) ||
|
|
compare_ether_addr(priv->staging_rxon.wlap_bssid_addr,
|
|
priv->active_rxon.wlap_bssid_addr) ||
|
|
(priv->staging_rxon.dev_type != priv->active_rxon.dev_type) ||
|
|
(priv->staging_rxon.channel != priv->active_rxon.channel) ||
|
|
(priv->staging_rxon.air_propagation !=
|
|
priv->active_rxon.air_propagation) ||
|
|
(priv->staging_rxon.ofdm_ht_single_stream_basic_rates !=
|
|
priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
|
|
(priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
|
|
priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
|
|
(priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) ||
|
|
(priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
|
|
return 1;
|
|
|
|
/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
|
|
* be updated with the RXON_ASSOC command -- however only some
|
|
* flag transitions are allowed using RXON_ASSOC */
|
|
|
|
/* Check if we are not switching bands */
|
|
if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
|
|
(priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK))
|
|
return 1;
|
|
|
|
/* Check if we are switching association toggle */
|
|
if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
|
|
(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_send_rxon_assoc(struct iwl4965_priv *priv)
|
|
{
|
|
int rc = 0;
|
|
struct iwl4965_rx_packet *res = NULL;
|
|
struct iwl4965_rxon_assoc_cmd rxon_assoc;
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = REPLY_RXON_ASSOC,
|
|
.len = sizeof(rxon_assoc),
|
|
.meta.flags = CMD_WANT_SKB,
|
|
.data = &rxon_assoc,
|
|
};
|
|
const struct iwl4965_rxon_cmd *rxon1 = &priv->staging_rxon;
|
|
const struct iwl4965_rxon_cmd *rxon2 = &priv->active_rxon;
|
|
|
|
if ((rxon1->flags == rxon2->flags) &&
|
|
(rxon1->filter_flags == rxon2->filter_flags) &&
|
|
(rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
|
|
(rxon1->ofdm_ht_single_stream_basic_rates ==
|
|
rxon2->ofdm_ht_single_stream_basic_rates) &&
|
|
(rxon1->ofdm_ht_dual_stream_basic_rates ==
|
|
rxon2->ofdm_ht_dual_stream_basic_rates) &&
|
|
(rxon1->rx_chain == rxon2->rx_chain) &&
|
|
(rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
|
|
IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
|
|
return 0;
|
|
}
|
|
|
|
rxon_assoc.flags = priv->staging_rxon.flags;
|
|
rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
|
|
rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
|
|
rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
|
|
rxon_assoc.reserved = 0;
|
|
rxon_assoc.ofdm_ht_single_stream_basic_rates =
|
|
priv->staging_rxon.ofdm_ht_single_stream_basic_rates;
|
|
rxon_assoc.ofdm_ht_dual_stream_basic_rates =
|
|
priv->staging_rxon.ofdm_ht_dual_stream_basic_rates;
|
|
rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain;
|
|
|
|
rc = iwl4965_send_cmd_sync(priv, &cmd);
|
|
if (rc)
|
|
return rc;
|
|
|
|
res = (struct iwl4965_rx_packet *)cmd.meta.u.skb->data;
|
|
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
|
|
IWL_ERROR("Bad return from REPLY_RXON_ASSOC command\n");
|
|
rc = -EIO;
|
|
}
|
|
|
|
priv->alloc_rxb_skb--;
|
|
dev_kfree_skb_any(cmd.meta.u.skb);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_commit_rxon - commit staging_rxon to hardware
|
|
*
|
|
* The RXON command in staging_rxon is committed to the hardware and
|
|
* the active_rxon structure is updated with the new data. This
|
|
* function correctly transitions out of the RXON_ASSOC_MSK state if
|
|
* a HW tune is required based on the RXON structure changes.
|
|
*/
|
|
static int iwl4965_commit_rxon(struct iwl4965_priv *priv)
|
|
{
|
|
/* cast away the const for active_rxon in this function */
|
|
struct iwl4965_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
|
|
DECLARE_MAC_BUF(mac);
|
|
int rc = 0;
|
|
|
|
if (!iwl4965_is_alive(priv))
|
|
return -1;
|
|
|
|
/* always get timestamp with Rx frame */
|
|
priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
|
|
|
|
rc = iwl4965_check_rxon_cmd(&priv->staging_rxon);
|
|
if (rc) {
|
|
IWL_ERROR("Invalid RXON configuration. Not committing.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If we don't need to send a full RXON, we can use
|
|
* iwl4965_rxon_assoc_cmd which is used to reconfigure filter
|
|
* and other flags for the current radio configuration. */
|
|
if (!iwl4965_full_rxon_required(priv)) {
|
|
rc = iwl4965_send_rxon_assoc(priv);
|
|
if (rc) {
|
|
IWL_ERROR("Error setting RXON_ASSOC "
|
|
"configuration (%d).\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* station table will be cleared */
|
|
priv->assoc_station_added = 0;
|
|
|
|
#ifdef CONFIG_IWL4965_SENSITIVITY
|
|
priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
|
|
if (!priv->error_recovering)
|
|
priv->start_calib = 0;
|
|
|
|
iwl4965_init_sensitivity(priv, CMD_ASYNC, 1);
|
|
#endif /* CONFIG_IWL4965_SENSITIVITY */
|
|
|
|
/* If we are currently associated and the new config requires
|
|
* an RXON_ASSOC and the new config wants the associated mask enabled,
|
|
* we must clear the associated from the active configuration
|
|
* before we apply the new config */
|
|
if (iwl4965_is_associated(priv) &&
|
|
(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) {
|
|
IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
|
|
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_RXON,
|
|
sizeof(struct iwl4965_rxon_cmd),
|
|
&priv->active_rxon);
|
|
|
|
/* If the mask clearing failed then we set
|
|
* active_rxon back to what it was previously */
|
|
if (rc) {
|
|
active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
|
|
IWL_ERROR("Error clearing ASSOC_MSK on current "
|
|
"configuration (%d).\n", rc);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
IWL_DEBUG_INFO("Sending RXON\n"
|
|
"* with%s RXON_FILTER_ASSOC_MSK\n"
|
|
"* channel = %d\n"
|
|
"* bssid = %s\n",
|
|
((priv->staging_rxon.filter_flags &
|
|
RXON_FILTER_ASSOC_MSK) ? "" : "out"),
|
|
le16_to_cpu(priv->staging_rxon.channel),
|
|
print_mac(mac, priv->staging_rxon.bssid_addr));
|
|
|
|
/* Apply the new configuration */
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_RXON,
|
|
sizeof(struct iwl4965_rxon_cmd), &priv->staging_rxon);
|
|
if (rc) {
|
|
IWL_ERROR("Error setting new configuration (%d).\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
iwl4965_clear_stations_table(priv);
|
|
|
|
#ifdef CONFIG_IWL4965_SENSITIVITY
|
|
if (!priv->error_recovering)
|
|
priv->start_calib = 0;
|
|
|
|
priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
|
|
iwl4965_init_sensitivity(priv, CMD_ASYNC, 1);
|
|
#endif /* CONFIG_IWL4965_SENSITIVITY */
|
|
|
|
memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
|
|
|
|
/* If we issue a new RXON command which required a tune then we must
|
|
* send a new TXPOWER command or we won't be able to Tx any frames */
|
|
rc = iwl4965_hw_reg_send_txpower(priv);
|
|
if (rc) {
|
|
IWL_ERROR("Error setting Tx power (%d).\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
/* Add the broadcast address so we can send broadcast frames */
|
|
if (iwl4965_rxon_add_station(priv, iwl4965_broadcast_addr, 0) ==
|
|
IWL_INVALID_STATION) {
|
|
IWL_ERROR("Error adding BROADCAST address for transmit.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* If we have set the ASSOC_MSK and we are in BSS mode then
|
|
* add the IWL_AP_ID to the station rate table */
|
|
if (iwl4965_is_associated(priv) &&
|
|
(priv->iw_mode == IEEE80211_IF_TYPE_STA)) {
|
|
if (iwl4965_rxon_add_station(priv, priv->active_rxon.bssid_addr, 1)
|
|
== IWL_INVALID_STATION) {
|
|
IWL_ERROR("Error adding AP address for transmit.\n");
|
|
return -EIO;
|
|
}
|
|
priv->assoc_station_added = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_send_bt_config(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_bt_cmd bt_cmd = {
|
|
.flags = 3,
|
|
.lead_time = 0xAA,
|
|
.max_kill = 1,
|
|
.kill_ack_mask = 0,
|
|
.kill_cts_mask = 0,
|
|
};
|
|
|
|
return iwl4965_send_cmd_pdu(priv, REPLY_BT_CONFIG,
|
|
sizeof(struct iwl4965_bt_cmd), &bt_cmd);
|
|
}
|
|
|
|
static int iwl4965_send_scan_abort(struct iwl4965_priv *priv)
|
|
{
|
|
int rc = 0;
|
|
struct iwl4965_rx_packet *res;
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = REPLY_SCAN_ABORT_CMD,
|
|
.meta.flags = CMD_WANT_SKB,
|
|
};
|
|
|
|
/* If there isn't a scan actively going on in the hardware
|
|
* then we are in between scan bands and not actually
|
|
* actively scanning, so don't send the abort command */
|
|
if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
|
|
clear_bit(STATUS_SCAN_ABORTING, &priv->status);
|
|
return 0;
|
|
}
|
|
|
|
rc = iwl4965_send_cmd_sync(priv, &cmd);
|
|
if (rc) {
|
|
clear_bit(STATUS_SCAN_ABORTING, &priv->status);
|
|
return rc;
|
|
}
|
|
|
|
res = (struct iwl4965_rx_packet *)cmd.meta.u.skb->data;
|
|
if (res->u.status != CAN_ABORT_STATUS) {
|
|
/* The scan abort will return 1 for success or
|
|
* 2 for "failure". A failure condition can be
|
|
* due to simply not being in an active scan which
|
|
* can occur if we send the scan abort before we
|
|
* the microcode has notified us that a scan is
|
|
* completed. */
|
|
IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
|
|
clear_bit(STATUS_SCAN_ABORTING, &priv->status);
|
|
clear_bit(STATUS_SCAN_HW, &priv->status);
|
|
}
|
|
|
|
dev_kfree_skb_any(cmd.meta.u.skb);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int iwl4965_card_state_sync_callback(struct iwl4965_priv *priv,
|
|
struct iwl4965_cmd *cmd,
|
|
struct sk_buff *skb)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* CARD_STATE_CMD
|
|
*
|
|
* Use: Sets the device's internal card state to enable, disable, or halt
|
|
*
|
|
* When in the 'enable' state the card operates as normal.
|
|
* When in the 'disable' state, the card enters into a low power mode.
|
|
* When in the 'halt' state, the card is shut down and must be fully
|
|
* restarted to come back on.
|
|
*/
|
|
static int iwl4965_send_card_state(struct iwl4965_priv *priv, u32 flags, u8 meta_flag)
|
|
{
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = REPLY_CARD_STATE_CMD,
|
|
.len = sizeof(u32),
|
|
.data = &flags,
|
|
.meta.flags = meta_flag,
|
|
};
|
|
|
|
if (meta_flag & CMD_ASYNC)
|
|
cmd.meta.u.callback = iwl4965_card_state_sync_callback;
|
|
|
|
return iwl4965_send_cmd(priv, &cmd);
|
|
}
|
|
|
|
static int iwl4965_add_sta_sync_callback(struct iwl4965_priv *priv,
|
|
struct iwl4965_cmd *cmd, struct sk_buff *skb)
|
|
{
|
|
struct iwl4965_rx_packet *res = NULL;
|
|
|
|
if (!skb) {
|
|
IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n");
|
|
return 1;
|
|
}
|
|
|
|
res = (struct iwl4965_rx_packet *)skb->data;
|
|
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
|
|
IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
|
|
res->hdr.flags);
|
|
return 1;
|
|
}
|
|
|
|
switch (res->u.add_sta.status) {
|
|
case ADD_STA_SUCCESS_MSK:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* We didn't cache the SKB; let the caller free it */
|
|
return 1;
|
|
}
|
|
|
|
int iwl4965_send_add_station(struct iwl4965_priv *priv,
|
|
struct iwl4965_addsta_cmd *sta, u8 flags)
|
|
{
|
|
struct iwl4965_rx_packet *res = NULL;
|
|
int rc = 0;
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = REPLY_ADD_STA,
|
|
.len = sizeof(struct iwl4965_addsta_cmd),
|
|
.meta.flags = flags,
|
|
.data = sta,
|
|
};
|
|
|
|
if (flags & CMD_ASYNC)
|
|
cmd.meta.u.callback = iwl4965_add_sta_sync_callback;
|
|
else
|
|
cmd.meta.flags |= CMD_WANT_SKB;
|
|
|
|
rc = iwl4965_send_cmd(priv, &cmd);
|
|
|
|
if (rc || (flags & CMD_ASYNC))
|
|
return rc;
|
|
|
|
res = (struct iwl4965_rx_packet *)cmd.meta.u.skb->data;
|
|
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
|
|
IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
|
|
res->hdr.flags);
|
|
rc = -EIO;
|
|
}
|
|
|
|
if (rc == 0) {
|
|
switch (res->u.add_sta.status) {
|
|
case ADD_STA_SUCCESS_MSK:
|
|
IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n");
|
|
break;
|
|
default:
|
|
rc = -EIO;
|
|
IWL_WARNING("REPLY_ADD_STA failed\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
priv->alloc_rxb_skb--;
|
|
dev_kfree_skb_any(cmd.meta.u.skb);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int iwl4965_update_sta_key_info(struct iwl4965_priv *priv,
|
|
struct ieee80211_key_conf *keyconf,
|
|
u8 sta_id)
|
|
{
|
|
unsigned long flags;
|
|
__le16 key_flags = 0;
|
|
|
|
switch (keyconf->alg) {
|
|
case ALG_CCMP:
|
|
key_flags |= STA_KEY_FLG_CCMP;
|
|
key_flags |= cpu_to_le16(
|
|
keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
|
|
key_flags &= ~STA_KEY_FLG_INVALID;
|
|
break;
|
|
case ALG_TKIP:
|
|
case ALG_WEP:
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
priv->stations[sta_id].keyinfo.alg = keyconf->alg;
|
|
priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
|
|
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
|
|
keyconf->keylen);
|
|
|
|
memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
|
|
keyconf->keylen);
|
|
priv->stations[sta_id].sta.key.key_flags = key_flags;
|
|
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
|
|
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
|
|
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
|
|
IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
|
|
iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_clear_sta_key_info(struct iwl4965_priv *priv, u8 sta_id)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl4965_hw_key));
|
|
memset(&priv->stations[sta_id].sta.key, 0, sizeof(struct iwl4965_keyinfo));
|
|
priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
|
|
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
|
|
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
|
|
IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n");
|
|
iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, 0);
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_clear_free_frames(struct iwl4965_priv *priv)
|
|
{
|
|
struct list_head *element;
|
|
|
|
IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
|
|
priv->frames_count);
|
|
|
|
while (!list_empty(&priv->free_frames)) {
|
|
element = priv->free_frames.next;
|
|
list_del(element);
|
|
kfree(list_entry(element, struct iwl4965_frame, list));
|
|
priv->frames_count--;
|
|
}
|
|
|
|
if (priv->frames_count) {
|
|
IWL_WARNING("%d frames still in use. Did we lose one?\n",
|
|
priv->frames_count);
|
|
priv->frames_count = 0;
|
|
}
|
|
}
|
|
|
|
static struct iwl4965_frame *iwl4965_get_free_frame(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_frame *frame;
|
|
struct list_head *element;
|
|
if (list_empty(&priv->free_frames)) {
|
|
frame = kzalloc(sizeof(*frame), GFP_KERNEL);
|
|
if (!frame) {
|
|
IWL_ERROR("Could not allocate frame!\n");
|
|
return NULL;
|
|
}
|
|
|
|
priv->frames_count++;
|
|
return frame;
|
|
}
|
|
|
|
element = priv->free_frames.next;
|
|
list_del(element);
|
|
return list_entry(element, struct iwl4965_frame, list);
|
|
}
|
|
|
|
static void iwl4965_free_frame(struct iwl4965_priv *priv, struct iwl4965_frame *frame)
|
|
{
|
|
memset(frame, 0, sizeof(*frame));
|
|
list_add(&frame->list, &priv->free_frames);
|
|
}
|
|
|
|
unsigned int iwl4965_fill_beacon_frame(struct iwl4965_priv *priv,
|
|
struct ieee80211_hdr *hdr,
|
|
const u8 *dest, int left)
|
|
{
|
|
|
|
if (!iwl4965_is_associated(priv) || !priv->ibss_beacon ||
|
|
((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) &&
|
|
(priv->iw_mode != IEEE80211_IF_TYPE_AP)))
|
|
return 0;
|
|
|
|
if (priv->ibss_beacon->len > left)
|
|
return 0;
|
|
|
|
memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
|
|
|
|
return priv->ibss_beacon->len;
|
|
}
|
|
|
|
int iwl4965_rate_index_from_plcp(int plcp)
|
|
{
|
|
int i = 0;
|
|
|
|
/* 4965 HT rate format */
|
|
if (plcp & RATE_MCS_HT_MSK) {
|
|
i = (plcp & 0xff);
|
|
|
|
if (i >= IWL_RATE_MIMO_6M_PLCP)
|
|
i = i - IWL_RATE_MIMO_6M_PLCP;
|
|
|
|
i += IWL_FIRST_OFDM_RATE;
|
|
/* skip 9M not supported in ht*/
|
|
if (i >= IWL_RATE_9M_INDEX)
|
|
i += 1;
|
|
if ((i >= IWL_FIRST_OFDM_RATE) &&
|
|
(i <= IWL_LAST_OFDM_RATE))
|
|
return i;
|
|
|
|
/* 4965 legacy rate format, search for match in table */
|
|
} else {
|
|
for (i = 0; i < ARRAY_SIZE(iwl4965_rates); i++)
|
|
if (iwl4965_rates[i].plcp == (plcp &0xFF))
|
|
return i;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static u8 iwl4965_rate_get_lowest_plcp(int rate_mask)
|
|
{
|
|
u8 i;
|
|
|
|
for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
|
|
i = iwl4965_rates[i].next_ieee) {
|
|
if (rate_mask & (1 << i))
|
|
return iwl4965_rates[i].plcp;
|
|
}
|
|
|
|
return IWL_RATE_INVALID;
|
|
}
|
|
|
|
static int iwl4965_send_beacon_cmd(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_frame *frame;
|
|
unsigned int frame_size;
|
|
int rc;
|
|
u8 rate;
|
|
|
|
frame = iwl4965_get_free_frame(priv);
|
|
|
|
if (!frame) {
|
|
IWL_ERROR("Could not obtain free frame buffer for beacon "
|
|
"command.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)) {
|
|
rate = iwl4965_rate_get_lowest_plcp(priv->active_rate_basic &
|
|
0xFF0);
|
|
if (rate == IWL_INVALID_RATE)
|
|
rate = IWL_RATE_6M_PLCP;
|
|
} else {
|
|
rate = iwl4965_rate_get_lowest_plcp(priv->active_rate_basic & 0xF);
|
|
if (rate == IWL_INVALID_RATE)
|
|
rate = IWL_RATE_1M_PLCP;
|
|
}
|
|
|
|
frame_size = iwl4965_hw_get_beacon_cmd(priv, frame, rate);
|
|
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
|
|
&frame->u.cmd[0]);
|
|
|
|
iwl4965_free_frame(priv, frame);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* EEPROM related functions
|
|
*
|
|
******************************************************************************/
|
|
|
|
static void get_eeprom_mac(struct iwl4965_priv *priv, u8 *mac)
|
|
{
|
|
memcpy(mac, priv->eeprom.mac_address, 6);
|
|
}
|
|
|
|
static inline void iwl4965_eeprom_release_semaphore(struct iwl4965_priv *priv)
|
|
{
|
|
iwl4965_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
|
|
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_eeprom_init - read EEPROM contents
|
|
*
|
|
* Load the EEPROM contents from adapter into priv->eeprom
|
|
*
|
|
* NOTE: This routine uses the non-debug IO access functions.
|
|
*/
|
|
int iwl4965_eeprom_init(struct iwl4965_priv *priv)
|
|
{
|
|
__le16 *e = (__le16 *)&priv->eeprom;
|
|
u32 gp = iwl4965_read32(priv, CSR_EEPROM_GP);
|
|
u32 r;
|
|
int sz = sizeof(priv->eeprom);
|
|
int rc;
|
|
int i;
|
|
u16 addr;
|
|
|
|
/* The EEPROM structure has several padding buffers within it
|
|
* and when adding new EEPROM maps is subject to programmer errors
|
|
* which may be very difficult to identify without explicitly
|
|
* checking the resulting size of the eeprom map. */
|
|
BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
|
|
|
|
if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
|
|
IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
|
|
return -ENOENT;
|
|
}
|
|
|
|
/* Make sure driver (instead of uCode) is allowed to read EEPROM */
|
|
rc = iwl4965_eeprom_acquire_semaphore(priv);
|
|
if (rc < 0) {
|
|
IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
/* eeprom is an array of 16bit values */
|
|
for (addr = 0; addr < sz; addr += sizeof(u16)) {
|
|
_iwl4965_write32(priv, CSR_EEPROM_REG, addr << 1);
|
|
_iwl4965_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
|
|
|
|
for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT;
|
|
i += IWL_EEPROM_ACCESS_DELAY) {
|
|
r = _iwl4965_read_direct32(priv, CSR_EEPROM_REG);
|
|
if (r & CSR_EEPROM_REG_READ_VALID_MSK)
|
|
break;
|
|
udelay(IWL_EEPROM_ACCESS_DELAY);
|
|
}
|
|
|
|
if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
|
|
IWL_ERROR("Time out reading EEPROM[%d]", addr);
|
|
rc = -ETIMEDOUT;
|
|
goto done;
|
|
}
|
|
e[addr / 2] = cpu_to_le16(r >> 16);
|
|
}
|
|
rc = 0;
|
|
|
|
done:
|
|
iwl4965_eeprom_release_semaphore(priv);
|
|
return rc;
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* Misc. internal state and helper functions
|
|
*
|
|
******************************************************************************/
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
|
|
/**
|
|
* iwl4965_report_frame - dump frame to syslog during debug sessions
|
|
*
|
|
* You may hack this function to show different aspects of received frames,
|
|
* including selective frame dumps.
|
|
* group100 parameter selects whether to show 1 out of 100 good frames.
|
|
*
|
|
* TODO: This was originally written for 3945, need to audit for
|
|
* proper operation with 4965.
|
|
*/
|
|
void iwl4965_report_frame(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_packet *pkt,
|
|
struct ieee80211_hdr *header, int group100)
|
|
{
|
|
u32 to_us;
|
|
u32 print_summary = 0;
|
|
u32 print_dump = 0; /* set to 1 to dump all frames' contents */
|
|
u32 hundred = 0;
|
|
u32 dataframe = 0;
|
|
u16 fc;
|
|
u16 seq_ctl;
|
|
u16 channel;
|
|
u16 phy_flags;
|
|
int rate_sym;
|
|
u16 length;
|
|
u16 status;
|
|
u16 bcn_tmr;
|
|
u32 tsf_low;
|
|
u64 tsf;
|
|
u8 rssi;
|
|
u8 agc;
|
|
u16 sig_avg;
|
|
u16 noise_diff;
|
|
struct iwl4965_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
|
|
struct iwl4965_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
|
|
struct iwl4965_rx_frame_end *rx_end = IWL_RX_END(pkt);
|
|
u8 *data = IWL_RX_DATA(pkt);
|
|
|
|
/* MAC header */
|
|
fc = le16_to_cpu(header->frame_control);
|
|
seq_ctl = le16_to_cpu(header->seq_ctrl);
|
|
|
|
/* metadata */
|
|
channel = le16_to_cpu(rx_hdr->channel);
|
|
phy_flags = le16_to_cpu(rx_hdr->phy_flags);
|
|
rate_sym = rx_hdr->rate;
|
|
length = le16_to_cpu(rx_hdr->len);
|
|
|
|
/* end-of-frame status and timestamp */
|
|
status = le32_to_cpu(rx_end->status);
|
|
bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp);
|
|
tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff;
|
|
tsf = le64_to_cpu(rx_end->timestamp);
|
|
|
|
/* signal statistics */
|
|
rssi = rx_stats->rssi;
|
|
agc = rx_stats->agc;
|
|
sig_avg = le16_to_cpu(rx_stats->sig_avg);
|
|
noise_diff = le16_to_cpu(rx_stats->noise_diff);
|
|
|
|
to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
|
|
|
|
/* if data frame is to us and all is good,
|
|
* (optionally) print summary for only 1 out of every 100 */
|
|
if (to_us && (fc & ~IEEE80211_FCTL_PROTECTED) ==
|
|
(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
|
|
dataframe = 1;
|
|
if (!group100)
|
|
print_summary = 1; /* print each frame */
|
|
else if (priv->framecnt_to_us < 100) {
|
|
priv->framecnt_to_us++;
|
|
print_summary = 0;
|
|
} else {
|
|
priv->framecnt_to_us = 0;
|
|
print_summary = 1;
|
|
hundred = 1;
|
|
}
|
|
} else {
|
|
/* print summary for all other frames */
|
|
print_summary = 1;
|
|
}
|
|
|
|
if (print_summary) {
|
|
char *title;
|
|
u32 rate;
|
|
|
|
if (hundred)
|
|
title = "100Frames";
|
|
else if (fc & IEEE80211_FCTL_RETRY)
|
|
title = "Retry";
|
|
else if (ieee80211_is_assoc_response(fc))
|
|
title = "AscRsp";
|
|
else if (ieee80211_is_reassoc_response(fc))
|
|
title = "RasRsp";
|
|
else if (ieee80211_is_probe_response(fc)) {
|
|
title = "PrbRsp";
|
|
print_dump = 1; /* dump frame contents */
|
|
} else if (ieee80211_is_beacon(fc)) {
|
|
title = "Beacon";
|
|
print_dump = 1; /* dump frame contents */
|
|
} else if (ieee80211_is_atim(fc))
|
|
title = "ATIM";
|
|
else if (ieee80211_is_auth(fc))
|
|
title = "Auth";
|
|
else if (ieee80211_is_deauth(fc))
|
|
title = "DeAuth";
|
|
else if (ieee80211_is_disassoc(fc))
|
|
title = "DisAssoc";
|
|
else
|
|
title = "Frame";
|
|
|
|
rate = iwl4965_rate_index_from_plcp(rate_sym);
|
|
if (rate == -1)
|
|
rate = 0;
|
|
else
|
|
rate = iwl4965_rates[rate].ieee / 2;
|
|
|
|
/* print frame summary.
|
|
* MAC addresses show just the last byte (for brevity),
|
|
* but you can hack it to show more, if you'd like to. */
|
|
if (dataframe)
|
|
IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
|
|
"len=%u, rssi=%d, chnl=%d, rate=%u, \n",
|
|
title, fc, header->addr1[5],
|
|
length, rssi, channel, rate);
|
|
else {
|
|
/* src/dst addresses assume managed mode */
|
|
IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
|
|
"src=0x%02x, rssi=%u, tim=%lu usec, "
|
|
"phy=0x%02x, chnl=%d\n",
|
|
title, fc, header->addr1[5],
|
|
header->addr3[5], rssi,
|
|
tsf_low - priv->scan_start_tsf,
|
|
phy_flags, channel);
|
|
}
|
|
}
|
|
if (print_dump)
|
|
iwl4965_print_hex_dump(IWL_DL_RX, data, length);
|
|
}
|
|
#endif
|
|
|
|
static void iwl4965_unset_hw_setting(struct iwl4965_priv *priv)
|
|
{
|
|
if (priv->hw_setting.shared_virt)
|
|
pci_free_consistent(priv->pci_dev,
|
|
sizeof(struct iwl4965_shared),
|
|
priv->hw_setting.shared_virt,
|
|
priv->hw_setting.shared_phys);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_supported_rate_to_ie - fill in the supported rate in IE field
|
|
*
|
|
* return : set the bit for each supported rate insert in ie
|
|
*/
|
|
static u16 iwl4965_supported_rate_to_ie(u8 *ie, u16 supported_rate,
|
|
u16 basic_rate, int *left)
|
|
{
|
|
u16 ret_rates = 0, bit;
|
|
int i;
|
|
u8 *cnt = ie;
|
|
u8 *rates = ie + 1;
|
|
|
|
for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
|
|
if (bit & supported_rate) {
|
|
ret_rates |= bit;
|
|
rates[*cnt] = iwl4965_rates[i].ieee |
|
|
((bit & basic_rate) ? 0x80 : 0x00);
|
|
(*cnt)++;
|
|
(*left)--;
|
|
if ((*left <= 0) ||
|
|
(*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret_rates;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
void static iwl4965_set_ht_capab(struct ieee80211_hw *hw,
|
|
struct ieee80211_ht_cap *ht_cap,
|
|
u8 use_current_config);
|
|
#endif
|
|
|
|
/**
|
|
* iwl4965_fill_probe_req - fill in all required fields and IE for probe request
|
|
*/
|
|
static u16 iwl4965_fill_probe_req(struct iwl4965_priv *priv,
|
|
struct ieee80211_mgmt *frame,
|
|
int left, int is_direct)
|
|
{
|
|
int len = 0;
|
|
u8 *pos = NULL;
|
|
u16 active_rates, ret_rates, cck_rates, active_rate_basic;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
struct ieee80211_hw_mode *mode;
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
/* Make sure there is enough space for the probe request,
|
|
* two mandatory IEs and the data */
|
|
left -= 24;
|
|
if (left < 0)
|
|
return 0;
|
|
len += 24;
|
|
|
|
frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
|
|
memcpy(frame->da, iwl4965_broadcast_addr, ETH_ALEN);
|
|
memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
|
|
memcpy(frame->bssid, iwl4965_broadcast_addr, ETH_ALEN);
|
|
frame->seq_ctrl = 0;
|
|
|
|
/* fill in our indirect SSID IE */
|
|
/* ...next IE... */
|
|
|
|
left -= 2;
|
|
if (left < 0)
|
|
return 0;
|
|
len += 2;
|
|
pos = &(frame->u.probe_req.variable[0]);
|
|
*pos++ = WLAN_EID_SSID;
|
|
*pos++ = 0;
|
|
|
|
/* fill in our direct SSID IE... */
|
|
if (is_direct) {
|
|
/* ...next IE... */
|
|
left -= 2 + priv->essid_len;
|
|
if (left < 0)
|
|
return 0;
|
|
/* ... fill it in... */
|
|
*pos++ = WLAN_EID_SSID;
|
|
*pos++ = priv->essid_len;
|
|
memcpy(pos, priv->essid, priv->essid_len);
|
|
pos += priv->essid_len;
|
|
len += 2 + priv->essid_len;
|
|
}
|
|
|
|
/* fill in supported rate */
|
|
/* ...next IE... */
|
|
left -= 2;
|
|
if (left < 0)
|
|
return 0;
|
|
|
|
/* ... fill it in... */
|
|
*pos++ = WLAN_EID_SUPP_RATES;
|
|
*pos = 0;
|
|
|
|
/* exclude 60M rate */
|
|
active_rates = priv->rates_mask;
|
|
active_rates &= ~IWL_RATE_60M_MASK;
|
|
|
|
active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
|
|
|
|
cck_rates = IWL_CCK_RATES_MASK & active_rates;
|
|
ret_rates = iwl4965_supported_rate_to_ie(pos, cck_rates,
|
|
active_rate_basic, &left);
|
|
active_rates &= ~ret_rates;
|
|
|
|
ret_rates = iwl4965_supported_rate_to_ie(pos, active_rates,
|
|
active_rate_basic, &left);
|
|
active_rates &= ~ret_rates;
|
|
|
|
len += 2 + *pos;
|
|
pos += (*pos) + 1;
|
|
if (active_rates == 0)
|
|
goto fill_end;
|
|
|
|
/* fill in supported extended rate */
|
|
/* ...next IE... */
|
|
left -= 2;
|
|
if (left < 0)
|
|
return 0;
|
|
/* ... fill it in... */
|
|
*pos++ = WLAN_EID_EXT_SUPP_RATES;
|
|
*pos = 0;
|
|
iwl4965_supported_rate_to_ie(pos, active_rates,
|
|
active_rate_basic, &left);
|
|
if (*pos > 0)
|
|
len += 2 + *pos;
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
mode = priv->hw->conf.mode;
|
|
if (mode->ht_info.ht_supported) {
|
|
pos += (*pos) + 1;
|
|
*pos++ = WLAN_EID_HT_CAPABILITY;
|
|
*pos++ = sizeof(struct ieee80211_ht_cap);
|
|
iwl4965_set_ht_capab(priv->hw,
|
|
(struct ieee80211_ht_cap *)pos, 0);
|
|
len += 2 + sizeof(struct ieee80211_ht_cap);
|
|
}
|
|
#endif /*CONFIG_IWL4965_HT */
|
|
|
|
fill_end:
|
|
return (u16)len;
|
|
}
|
|
|
|
/*
|
|
* QoS support
|
|
*/
|
|
#ifdef CONFIG_IWL4965_QOS
|
|
static int iwl4965_send_qos_params_command(struct iwl4965_priv *priv,
|
|
struct iwl4965_qosparam_cmd *qos)
|
|
{
|
|
|
|
return iwl4965_send_cmd_pdu(priv, REPLY_QOS_PARAM,
|
|
sizeof(struct iwl4965_qosparam_cmd), qos);
|
|
}
|
|
|
|
static void iwl4965_reset_qos(struct iwl4965_priv *priv)
|
|
{
|
|
u16 cw_min = 15;
|
|
u16 cw_max = 1023;
|
|
u8 aifs = 2;
|
|
u8 is_legacy = 0;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->qos_data.qos_active = 0;
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) {
|
|
if (priv->qos_data.qos_enable)
|
|
priv->qos_data.qos_active = 1;
|
|
if (!(priv->active_rate & 0xfff0)) {
|
|
cw_min = 31;
|
|
is_legacy = 1;
|
|
}
|
|
} else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
|
|
if (priv->qos_data.qos_enable)
|
|
priv->qos_data.qos_active = 1;
|
|
} else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) {
|
|
cw_min = 31;
|
|
is_legacy = 1;
|
|
}
|
|
|
|
if (priv->qos_data.qos_active)
|
|
aifs = 3;
|
|
|
|
priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
|
|
priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
|
|
priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
|
|
priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
|
|
priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
|
|
|
|
if (priv->qos_data.qos_active) {
|
|
i = 1;
|
|
priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
|
|
priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
|
|
priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
|
|
priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
|
|
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
|
|
|
|
i = 2;
|
|
priv->qos_data.def_qos_parm.ac[i].cw_min =
|
|
cpu_to_le16((cw_min + 1) / 2 - 1);
|
|
priv->qos_data.def_qos_parm.ac[i].cw_max =
|
|
cpu_to_le16(cw_max);
|
|
priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
|
|
if (is_legacy)
|
|
priv->qos_data.def_qos_parm.ac[i].edca_txop =
|
|
cpu_to_le16(6016);
|
|
else
|
|
priv->qos_data.def_qos_parm.ac[i].edca_txop =
|
|
cpu_to_le16(3008);
|
|
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
|
|
|
|
i = 3;
|
|
priv->qos_data.def_qos_parm.ac[i].cw_min =
|
|
cpu_to_le16((cw_min + 1) / 4 - 1);
|
|
priv->qos_data.def_qos_parm.ac[i].cw_max =
|
|
cpu_to_le16((cw_max + 1) / 2 - 1);
|
|
priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
|
|
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
|
|
if (is_legacy)
|
|
priv->qos_data.def_qos_parm.ac[i].edca_txop =
|
|
cpu_to_le16(3264);
|
|
else
|
|
priv->qos_data.def_qos_parm.ac[i].edca_txop =
|
|
cpu_to_le16(1504);
|
|
} else {
|
|
for (i = 1; i < 4; i++) {
|
|
priv->qos_data.def_qos_parm.ac[i].cw_min =
|
|
cpu_to_le16(cw_min);
|
|
priv->qos_data.def_qos_parm.ac[i].cw_max =
|
|
cpu_to_le16(cw_max);
|
|
priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
|
|
priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
|
|
priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
|
|
}
|
|
}
|
|
IWL_DEBUG_QOS("set QoS to default \n");
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static void iwl4965_activate_qos(struct iwl4965_priv *priv, u8 force)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
if (!priv->qos_data.qos_enable)
|
|
return;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->qos_data.def_qos_parm.qos_flags = 0;
|
|
|
|
if (priv->qos_data.qos_cap.q_AP.queue_request &&
|
|
!priv->qos_data.qos_cap.q_AP.txop_request)
|
|
priv->qos_data.def_qos_parm.qos_flags |=
|
|
QOS_PARAM_FLG_TXOP_TYPE_MSK;
|
|
if (priv->qos_data.qos_active)
|
|
priv->qos_data.def_qos_parm.qos_flags |=
|
|
QOS_PARAM_FLG_UPDATE_EDCA_MSK;
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
if (priv->current_ht_config.is_ht)
|
|
priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
if (force || iwl4965_is_associated(priv)) {
|
|
IWL_DEBUG_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n",
|
|
priv->qos_data.qos_active,
|
|
priv->qos_data.def_qos_parm.qos_flags);
|
|
|
|
iwl4965_send_qos_params_command(priv,
|
|
&(priv->qos_data.def_qos_parm));
|
|
}
|
|
}
|
|
|
|
#endif /* CONFIG_IWL4965_QOS */
|
|
/*
|
|
* Power management (not Tx power!) functions
|
|
*/
|
|
#define MSEC_TO_USEC 1024
|
|
|
|
#define NOSLP __constant_cpu_to_le16(0), 0, 0
|
|
#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
|
|
#define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC)
|
|
#define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \
|
|
__constant_cpu_to_le32(X1), \
|
|
__constant_cpu_to_le32(X2), \
|
|
__constant_cpu_to_le32(X3), \
|
|
__constant_cpu_to_le32(X4)}
|
|
|
|
|
|
/* default power management (not Tx power) table values */
|
|
/* for tim 0-10 */
|
|
static struct iwl4965_power_vec_entry range_0[IWL_POWER_AC] = {
|
|
{{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
|
|
{{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
|
|
{{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0},
|
|
{{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0},
|
|
{{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1},
|
|
{{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1}
|
|
};
|
|
|
|
/* for tim > 10 */
|
|
static struct iwl4965_power_vec_entry range_1[IWL_POWER_AC] = {
|
|
{{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
|
|
{{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500),
|
|
SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
|
|
{{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300),
|
|
SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
|
|
{{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100),
|
|
SLP_VEC(2, 6, 9, 9, 0xFF)}, 0},
|
|
{{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
|
|
{{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25),
|
|
SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
|
|
};
|
|
|
|
int iwl4965_power_init_handle(struct iwl4965_priv *priv)
|
|
{
|
|
int rc = 0, i;
|
|
struct iwl4965_power_mgr *pow_data;
|
|
int size = sizeof(struct iwl4965_power_vec_entry) * IWL_POWER_AC;
|
|
u16 pci_pm;
|
|
|
|
IWL_DEBUG_POWER("Initialize power \n");
|
|
|
|
pow_data = &(priv->power_data);
|
|
|
|
memset(pow_data, 0, sizeof(*pow_data));
|
|
|
|
pow_data->active_index = IWL_POWER_RANGE_0;
|
|
pow_data->dtim_val = 0xffff;
|
|
|
|
memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
|
|
memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
|
|
|
|
rc = pci_read_config_word(priv->pci_dev, PCI_LINK_CTRL, &pci_pm);
|
|
if (rc != 0)
|
|
return 0;
|
|
else {
|
|
struct iwl4965_powertable_cmd *cmd;
|
|
|
|
IWL_DEBUG_POWER("adjust power command flags\n");
|
|
|
|
for (i = 0; i < IWL_POWER_AC; i++) {
|
|
cmd = &pow_data->pwr_range_0[i].cmd;
|
|
|
|
if (pci_pm & 0x1)
|
|
cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
|
|
else
|
|
cmd->flags |= IWL_POWER_PCI_PM_MSK;
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int iwl4965_update_power_cmd(struct iwl4965_priv *priv,
|
|
struct iwl4965_powertable_cmd *cmd, u32 mode)
|
|
{
|
|
int rc = 0, i;
|
|
u8 skip;
|
|
u32 max_sleep = 0;
|
|
struct iwl4965_power_vec_entry *range;
|
|
u8 period = 0;
|
|
struct iwl4965_power_mgr *pow_data;
|
|
|
|
if (mode > IWL_POWER_INDEX_5) {
|
|
IWL_DEBUG_POWER("Error invalid power mode \n");
|
|
return -1;
|
|
}
|
|
pow_data = &(priv->power_data);
|
|
|
|
if (pow_data->active_index == IWL_POWER_RANGE_0)
|
|
range = &pow_data->pwr_range_0[0];
|
|
else
|
|
range = &pow_data->pwr_range_1[1];
|
|
|
|
memcpy(cmd, &range[mode].cmd, sizeof(struct iwl4965_powertable_cmd));
|
|
|
|
#ifdef IWL_MAC80211_DISABLE
|
|
if (priv->assoc_network != NULL) {
|
|
unsigned long flags;
|
|
|
|
period = priv->assoc_network->tim.tim_period;
|
|
}
|
|
#endif /*IWL_MAC80211_DISABLE */
|
|
skip = range[mode].no_dtim;
|
|
|
|
if (period == 0) {
|
|
period = 1;
|
|
skip = 0;
|
|
}
|
|
|
|
if (skip == 0) {
|
|
max_sleep = period;
|
|
cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
|
|
} else {
|
|
__le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
|
|
max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
|
|
cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
|
|
}
|
|
|
|
for (i = 0; i < IWL_POWER_VEC_SIZE; i++) {
|
|
if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
|
|
cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
|
|
}
|
|
|
|
IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags);
|
|
IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
|
|
IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
|
|
IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
|
|
le32_to_cpu(cmd->sleep_interval[0]),
|
|
le32_to_cpu(cmd->sleep_interval[1]),
|
|
le32_to_cpu(cmd->sleep_interval[2]),
|
|
le32_to_cpu(cmd->sleep_interval[3]),
|
|
le32_to_cpu(cmd->sleep_interval[4]));
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int iwl4965_send_power_mode(struct iwl4965_priv *priv, u32 mode)
|
|
{
|
|
u32 uninitialized_var(final_mode);
|
|
int rc;
|
|
struct iwl4965_powertable_cmd cmd;
|
|
|
|
/* If on battery, set to 3,
|
|
* if plugged into AC power, set to CAM ("continuously aware mode"),
|
|
* else user level */
|
|
switch (mode) {
|
|
case IWL_POWER_BATTERY:
|
|
final_mode = IWL_POWER_INDEX_3;
|
|
break;
|
|
case IWL_POWER_AC:
|
|
final_mode = IWL_POWER_MODE_CAM;
|
|
break;
|
|
default:
|
|
final_mode = mode;
|
|
break;
|
|
}
|
|
|
|
cmd.keep_alive_beacons = 0;
|
|
|
|
iwl4965_update_power_cmd(priv, &cmd, final_mode);
|
|
|
|
rc = iwl4965_send_cmd_pdu(priv, POWER_TABLE_CMD, sizeof(cmd), &cmd);
|
|
|
|
if (final_mode == IWL_POWER_MODE_CAM)
|
|
clear_bit(STATUS_POWER_PMI, &priv->status);
|
|
else
|
|
set_bit(STATUS_POWER_PMI, &priv->status);
|
|
|
|
return rc;
|
|
}
|
|
|
|
int iwl4965_is_network_packet(struct iwl4965_priv *priv, struct ieee80211_hdr *header)
|
|
{
|
|
/* Filter incoming packets to determine if they are targeted toward
|
|
* this network, discarding packets coming from ourselves */
|
|
switch (priv->iw_mode) {
|
|
case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */
|
|
/* packets from our adapter are dropped (echo) */
|
|
if (!compare_ether_addr(header->addr2, priv->mac_addr))
|
|
return 0;
|
|
/* {broad,multi}cast packets to our IBSS go through */
|
|
if (is_multicast_ether_addr(header->addr1))
|
|
return !compare_ether_addr(header->addr3, priv->bssid);
|
|
/* packets to our adapter go through */
|
|
return !compare_ether_addr(header->addr1, priv->mac_addr);
|
|
case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
|
|
/* packets from our adapter are dropped (echo) */
|
|
if (!compare_ether_addr(header->addr3, priv->mac_addr))
|
|
return 0;
|
|
/* {broad,multi}cast packets to our BSS go through */
|
|
if (is_multicast_ether_addr(header->addr1))
|
|
return !compare_ether_addr(header->addr2, priv->bssid);
|
|
/* packets to our adapter go through */
|
|
return !compare_ether_addr(header->addr1, priv->mac_addr);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
|
|
|
|
static const char *iwl4965_get_tx_fail_reason(u32 status)
|
|
{
|
|
switch (status & TX_STATUS_MSK) {
|
|
case TX_STATUS_SUCCESS:
|
|
return "SUCCESS";
|
|
TX_STATUS_ENTRY(SHORT_LIMIT);
|
|
TX_STATUS_ENTRY(LONG_LIMIT);
|
|
TX_STATUS_ENTRY(FIFO_UNDERRUN);
|
|
TX_STATUS_ENTRY(MGMNT_ABORT);
|
|
TX_STATUS_ENTRY(NEXT_FRAG);
|
|
TX_STATUS_ENTRY(LIFE_EXPIRE);
|
|
TX_STATUS_ENTRY(DEST_PS);
|
|
TX_STATUS_ENTRY(ABORTED);
|
|
TX_STATUS_ENTRY(BT_RETRY);
|
|
TX_STATUS_ENTRY(STA_INVALID);
|
|
TX_STATUS_ENTRY(FRAG_DROPPED);
|
|
TX_STATUS_ENTRY(TID_DISABLE);
|
|
TX_STATUS_ENTRY(FRAME_FLUSHED);
|
|
TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
|
|
TX_STATUS_ENTRY(TX_LOCKED);
|
|
TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
|
|
}
|
|
|
|
return "UNKNOWN";
|
|
}
|
|
|
|
/**
|
|
* iwl4965_scan_cancel - Cancel any currently executing HW scan
|
|
*
|
|
* NOTE: priv->mutex is not required before calling this function
|
|
*/
|
|
static int iwl4965_scan_cancel(struct iwl4965_priv *priv)
|
|
{
|
|
if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
|
|
clear_bit(STATUS_SCANNING, &priv->status);
|
|
return 0;
|
|
}
|
|
|
|
if (test_bit(STATUS_SCANNING, &priv->status)) {
|
|
if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
|
|
IWL_DEBUG_SCAN("Queuing scan abort.\n");
|
|
set_bit(STATUS_SCAN_ABORTING, &priv->status);
|
|
queue_work(priv->workqueue, &priv->abort_scan);
|
|
|
|
} else
|
|
IWL_DEBUG_SCAN("Scan abort already in progress.\n");
|
|
|
|
return test_bit(STATUS_SCANNING, &priv->status);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_scan_cancel_timeout - Cancel any currently executing HW scan
|
|
* @ms: amount of time to wait (in milliseconds) for scan to abort
|
|
*
|
|
* NOTE: priv->mutex must be held before calling this function
|
|
*/
|
|
static int iwl4965_scan_cancel_timeout(struct iwl4965_priv *priv, unsigned long ms)
|
|
{
|
|
unsigned long now = jiffies;
|
|
int ret;
|
|
|
|
ret = iwl4965_scan_cancel(priv);
|
|
if (ret && ms) {
|
|
mutex_unlock(&priv->mutex);
|
|
while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
|
|
test_bit(STATUS_SCANNING, &priv->status))
|
|
msleep(1);
|
|
mutex_lock(&priv->mutex);
|
|
|
|
return test_bit(STATUS_SCANNING, &priv->status);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void iwl4965_sequence_reset(struct iwl4965_priv *priv)
|
|
{
|
|
/* Reset ieee stats */
|
|
|
|
/* We don't reset the net_device_stats (ieee->stats) on
|
|
* re-association */
|
|
|
|
priv->last_seq_num = -1;
|
|
priv->last_frag_num = -1;
|
|
priv->last_packet_time = 0;
|
|
|
|
iwl4965_scan_cancel(priv);
|
|
}
|
|
|
|
#define MAX_UCODE_BEACON_INTERVAL 4096
|
|
#define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA)
|
|
|
|
static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val)
|
|
{
|
|
u16 new_val = 0;
|
|
u16 beacon_factor = 0;
|
|
|
|
beacon_factor =
|
|
(beacon_val + MAX_UCODE_BEACON_INTERVAL)
|
|
/ MAX_UCODE_BEACON_INTERVAL;
|
|
new_val = beacon_val / beacon_factor;
|
|
|
|
return cpu_to_le16(new_val);
|
|
}
|
|
|
|
static void iwl4965_setup_rxon_timing(struct iwl4965_priv *priv)
|
|
{
|
|
u64 interval_tm_unit;
|
|
u64 tsf, result;
|
|
unsigned long flags;
|
|
struct ieee80211_conf *conf = NULL;
|
|
u16 beacon_int = 0;
|
|
|
|
conf = ieee80211_get_hw_conf(priv->hw);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp1);
|
|
priv->rxon_timing.timestamp.dw[0] = cpu_to_le32(priv->timestamp0);
|
|
|
|
priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL;
|
|
|
|
tsf = priv->timestamp1;
|
|
tsf = ((tsf << 32) | priv->timestamp0);
|
|
|
|
beacon_int = priv->beacon_int;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
|
|
if (beacon_int == 0) {
|
|
priv->rxon_timing.beacon_interval = cpu_to_le16(100);
|
|
priv->rxon_timing.beacon_init_val = cpu_to_le32(102400);
|
|
} else {
|
|
priv->rxon_timing.beacon_interval =
|
|
cpu_to_le16(beacon_int);
|
|
priv->rxon_timing.beacon_interval =
|
|
iwl4965_adjust_beacon_interval(
|
|
le16_to_cpu(priv->rxon_timing.beacon_interval));
|
|
}
|
|
|
|
priv->rxon_timing.atim_window = 0;
|
|
} else {
|
|
priv->rxon_timing.beacon_interval =
|
|
iwl4965_adjust_beacon_interval(conf->beacon_int);
|
|
/* TODO: we need to get atim_window from upper stack
|
|
* for now we set to 0 */
|
|
priv->rxon_timing.atim_window = 0;
|
|
}
|
|
|
|
interval_tm_unit =
|
|
(le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024);
|
|
result = do_div(tsf, interval_tm_unit);
|
|
priv->rxon_timing.beacon_init_val =
|
|
cpu_to_le32((u32) ((u64) interval_tm_unit - result));
|
|
|
|
IWL_DEBUG_ASSOC
|
|
("beacon interval %d beacon timer %d beacon tim %d\n",
|
|
le16_to_cpu(priv->rxon_timing.beacon_interval),
|
|
le32_to_cpu(priv->rxon_timing.beacon_init_val),
|
|
le16_to_cpu(priv->rxon_timing.atim_window));
|
|
}
|
|
|
|
static int iwl4965_scan_initiate(struct iwl4965_priv *priv)
|
|
{
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
|
|
IWL_ERROR("APs don't scan.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (!iwl4965_is_ready_rf(priv)) {
|
|
IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (test_bit(STATUS_SCANNING, &priv->status)) {
|
|
IWL_DEBUG_SCAN("Scan already in progress.\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
|
|
IWL_DEBUG_SCAN("Scan request while abort pending. "
|
|
"Queuing.\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
IWL_DEBUG_INFO("Starting scan...\n");
|
|
priv->scan_bands = 2;
|
|
set_bit(STATUS_SCANNING, &priv->status);
|
|
priv->scan_start = jiffies;
|
|
priv->scan_pass_start = priv->scan_start;
|
|
|
|
queue_work(priv->workqueue, &priv->request_scan);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_set_rxon_hwcrypto(struct iwl4965_priv *priv, int hw_decrypt)
|
|
{
|
|
struct iwl4965_rxon_cmd *rxon = &priv->staging_rxon;
|
|
|
|
if (hw_decrypt)
|
|
rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
|
|
else
|
|
rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_set_flags_for_phymode(struct iwl4965_priv *priv, u8 phymode)
|
|
{
|
|
if (phymode == MODE_IEEE80211A) {
|
|
priv->staging_rxon.flags &=
|
|
~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
|
|
| RXON_FLG_CCK_MSK);
|
|
priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
|
|
} else {
|
|
/* Copied from iwl4965_bg_post_associate() */
|
|
if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
|
|
priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
|
|
else
|
|
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
|
|
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
|
|
|
|
priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
|
|
priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
|
|
priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* initialize rxon structure with default values from eeprom
|
|
*/
|
|
static void iwl4965_connection_init_rx_config(struct iwl4965_priv *priv)
|
|
{
|
|
const struct iwl4965_channel_info *ch_info;
|
|
|
|
memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
|
|
|
|
switch (priv->iw_mode) {
|
|
case IEEE80211_IF_TYPE_AP:
|
|
priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP;
|
|
break;
|
|
|
|
case IEEE80211_IF_TYPE_STA:
|
|
priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS;
|
|
priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
|
|
break;
|
|
|
|
case IEEE80211_IF_TYPE_IBSS:
|
|
priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS;
|
|
priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
|
|
RXON_FILTER_ACCEPT_GRP_MSK;
|
|
break;
|
|
|
|
case IEEE80211_IF_TYPE_MNTR:
|
|
priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
|
|
priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
|
|
RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
|
|
break;
|
|
}
|
|
|
|
#if 0
|
|
/* TODO: Figure out when short_preamble would be set and cache from
|
|
* that */
|
|
if (!hw_to_local(priv->hw)->short_preamble)
|
|
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
else
|
|
priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
#endif
|
|
|
|
ch_info = iwl4965_get_channel_info(priv, priv->phymode,
|
|
le16_to_cpu(priv->staging_rxon.channel));
|
|
|
|
if (!ch_info)
|
|
ch_info = &priv->channel_info[0];
|
|
|
|
/*
|
|
* in some case A channels are all non IBSS
|
|
* in this case force B/G channel
|
|
*/
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
|
|
!(is_channel_ibss(ch_info)))
|
|
ch_info = &priv->channel_info[0];
|
|
|
|
priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
|
|
if (is_channel_a_band(ch_info))
|
|
priv->phymode = MODE_IEEE80211A;
|
|
else
|
|
priv->phymode = MODE_IEEE80211G;
|
|
|
|
iwl4965_set_flags_for_phymode(priv, priv->phymode);
|
|
|
|
priv->staging_rxon.ofdm_basic_rates =
|
|
(IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
|
|
priv->staging_rxon.cck_basic_rates =
|
|
(IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
|
|
|
|
priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
|
|
RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
|
|
memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
|
|
memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
|
|
priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
|
|
priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
|
|
iwl4965_set_rxon_chain(priv);
|
|
}
|
|
|
|
static int iwl4965_set_mode(struct iwl4965_priv *priv, int mode)
|
|
{
|
|
if (mode == IEEE80211_IF_TYPE_IBSS) {
|
|
const struct iwl4965_channel_info *ch_info;
|
|
|
|
ch_info = iwl4965_get_channel_info(priv,
|
|
priv->phymode,
|
|
le16_to_cpu(priv->staging_rxon.channel));
|
|
|
|
if (!ch_info || !is_channel_ibss(ch_info)) {
|
|
IWL_ERROR("channel %d not IBSS channel\n",
|
|
le16_to_cpu(priv->staging_rxon.channel));
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
priv->iw_mode = mode;
|
|
|
|
iwl4965_connection_init_rx_config(priv);
|
|
memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
|
|
|
|
iwl4965_clear_stations_table(priv);
|
|
|
|
/* dont commit rxon if rf-kill is on*/
|
|
if (!iwl4965_is_ready_rf(priv))
|
|
return -EAGAIN;
|
|
|
|
cancel_delayed_work(&priv->scan_check);
|
|
if (iwl4965_scan_cancel_timeout(priv, 100)) {
|
|
IWL_WARNING("Aborted scan still in progress after 100ms\n");
|
|
IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
iwl4965_commit_rxon(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_build_tx_cmd_hwcrypto(struct iwl4965_priv *priv,
|
|
struct ieee80211_tx_control *ctl,
|
|
struct iwl4965_cmd *cmd,
|
|
struct sk_buff *skb_frag,
|
|
int last_frag)
|
|
{
|
|
struct iwl4965_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo;
|
|
|
|
switch (keyinfo->alg) {
|
|
case ALG_CCMP:
|
|
cmd->cmd.tx.sec_ctl = TX_CMD_SEC_CCM;
|
|
memcpy(cmd->cmd.tx.key, keyinfo->key, keyinfo->keylen);
|
|
IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n");
|
|
break;
|
|
|
|
case ALG_TKIP:
|
|
#if 0
|
|
cmd->cmd.tx.sec_ctl = TX_CMD_SEC_TKIP;
|
|
|
|
if (last_frag)
|
|
memcpy(cmd->cmd.tx.tkip_mic.byte, skb_frag->tail - 8,
|
|
8);
|
|
else
|
|
memset(cmd->cmd.tx.tkip_mic.byte, 0, 8);
|
|
#endif
|
|
break;
|
|
|
|
case ALG_WEP:
|
|
cmd->cmd.tx.sec_ctl = TX_CMD_SEC_WEP |
|
|
(ctl->key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
|
|
|
|
if (keyinfo->keylen == 13)
|
|
cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128;
|
|
|
|
memcpy(&cmd->cmd.tx.key[3], keyinfo->key, keyinfo->keylen);
|
|
|
|
IWL_DEBUG_TX("Configuring packet for WEP encryption "
|
|
"with key %d\n", ctl->key_idx);
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "Unknown encode alg %d\n", keyinfo->alg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* handle build REPLY_TX command notification.
|
|
*/
|
|
static void iwl4965_build_tx_cmd_basic(struct iwl4965_priv *priv,
|
|
struct iwl4965_cmd *cmd,
|
|
struct ieee80211_tx_control *ctrl,
|
|
struct ieee80211_hdr *hdr,
|
|
int is_unicast, u8 std_id)
|
|
{
|
|
__le16 *qc;
|
|
u16 fc = le16_to_cpu(hdr->frame_control);
|
|
__le32 tx_flags = cmd->cmd.tx.tx_flags;
|
|
|
|
cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
|
|
if (!(ctrl->flags & IEEE80211_TXCTL_NO_ACK)) {
|
|
tx_flags |= TX_CMD_FLG_ACK_MSK;
|
|
if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
|
|
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
|
|
if (ieee80211_is_probe_response(fc) &&
|
|
!(le16_to_cpu(hdr->seq_ctrl) & 0xf))
|
|
tx_flags |= TX_CMD_FLG_TSF_MSK;
|
|
} else {
|
|
tx_flags &= (~TX_CMD_FLG_ACK_MSK);
|
|
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
|
|
}
|
|
|
|
if (ieee80211_is_back_request(fc))
|
|
tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK;
|
|
|
|
|
|
cmd->cmd.tx.sta_id = std_id;
|
|
if (ieee80211_get_morefrag(hdr))
|
|
tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
|
|
|
|
qc = ieee80211_get_qos_ctrl(hdr);
|
|
if (qc) {
|
|
cmd->cmd.tx.tid_tspec = (u8) (le16_to_cpu(*qc) & 0xf);
|
|
tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
|
|
} else
|
|
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
|
|
|
|
if (ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
|
|
tx_flags |= TX_CMD_FLG_RTS_MSK;
|
|
tx_flags &= ~TX_CMD_FLG_CTS_MSK;
|
|
} else if (ctrl->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) {
|
|
tx_flags &= ~TX_CMD_FLG_RTS_MSK;
|
|
tx_flags |= TX_CMD_FLG_CTS_MSK;
|
|
}
|
|
|
|
if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
|
|
tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
|
|
|
|
tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
|
|
if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
|
|
if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ ||
|
|
(fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ)
|
|
cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(3);
|
|
else
|
|
cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(2);
|
|
} else
|
|
cmd->cmd.tx.timeout.pm_frame_timeout = 0;
|
|
|
|
cmd->cmd.tx.driver_txop = 0;
|
|
cmd->cmd.tx.tx_flags = tx_flags;
|
|
cmd->cmd.tx.next_frame_len = 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_get_sta_id - Find station's index within station table
|
|
*
|
|
* If new IBSS station, create new entry in station table
|
|
*/
|
|
static int iwl4965_get_sta_id(struct iwl4965_priv *priv,
|
|
struct ieee80211_hdr *hdr)
|
|
{
|
|
int sta_id;
|
|
u16 fc = le16_to_cpu(hdr->frame_control);
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
/* If this frame is broadcast or management, use broadcast station id */
|
|
if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
|
|
is_multicast_ether_addr(hdr->addr1))
|
|
return priv->hw_setting.bcast_sta_id;
|
|
|
|
switch (priv->iw_mode) {
|
|
|
|
/* If we are a client station in a BSS network, use the special
|
|
* AP station entry (that's the only station we communicate with) */
|
|
case IEEE80211_IF_TYPE_STA:
|
|
return IWL_AP_ID;
|
|
|
|
/* If we are an AP, then find the station, or use BCAST */
|
|
case IEEE80211_IF_TYPE_AP:
|
|
sta_id = iwl4965_hw_find_station(priv, hdr->addr1);
|
|
if (sta_id != IWL_INVALID_STATION)
|
|
return sta_id;
|
|
return priv->hw_setting.bcast_sta_id;
|
|
|
|
/* If this frame is going out to an IBSS network, find the station,
|
|
* or create a new station table entry */
|
|
case IEEE80211_IF_TYPE_IBSS:
|
|
sta_id = iwl4965_hw_find_station(priv, hdr->addr1);
|
|
if (sta_id != IWL_INVALID_STATION)
|
|
return sta_id;
|
|
|
|
/* Create new station table entry */
|
|
sta_id = iwl4965_add_station_flags(priv, hdr->addr1,
|
|
0, CMD_ASYNC, NULL);
|
|
|
|
if (sta_id != IWL_INVALID_STATION)
|
|
return sta_id;
|
|
|
|
IWL_DEBUG_DROP("Station %s not in station map. "
|
|
"Defaulting to broadcast...\n",
|
|
print_mac(mac, hdr->addr1));
|
|
iwl4965_print_hex_dump(IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
|
|
return priv->hw_setting.bcast_sta_id;
|
|
|
|
default:
|
|
IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
|
|
return priv->hw_setting.bcast_sta_id;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* start REPLY_TX command process
|
|
*/
|
|
static int iwl4965_tx_skb(struct iwl4965_priv *priv,
|
|
struct sk_buff *skb, struct ieee80211_tx_control *ctl)
|
|
{
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
|
|
struct iwl4965_tfd_frame *tfd;
|
|
u32 *control_flags;
|
|
int txq_id = ctl->queue;
|
|
struct iwl4965_tx_queue *txq = NULL;
|
|
struct iwl4965_queue *q = NULL;
|
|
dma_addr_t phys_addr;
|
|
dma_addr_t txcmd_phys;
|
|
dma_addr_t scratch_phys;
|
|
struct iwl4965_cmd *out_cmd = NULL;
|
|
u16 len, idx, len_org;
|
|
u8 id, hdr_len, unicast;
|
|
u8 sta_id;
|
|
u16 seq_number = 0;
|
|
u16 fc;
|
|
__le16 *qc;
|
|
u8 wait_write_ptr = 0;
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (iwl4965_is_rfkill(priv)) {
|
|
IWL_DEBUG_DROP("Dropping - RF KILL\n");
|
|
goto drop_unlock;
|
|
}
|
|
|
|
if (!priv->vif) {
|
|
IWL_DEBUG_DROP("Dropping - !priv->vif\n");
|
|
goto drop_unlock;
|
|
}
|
|
|
|
if ((ctl->tx_rate & 0xFF) == IWL_INVALID_RATE) {
|
|
IWL_ERROR("ERROR: No TX rate available.\n");
|
|
goto drop_unlock;
|
|
}
|
|
|
|
unicast = !is_multicast_ether_addr(hdr->addr1);
|
|
id = 0;
|
|
|
|
fc = le16_to_cpu(hdr->frame_control);
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
if (ieee80211_is_auth(fc))
|
|
IWL_DEBUG_TX("Sending AUTH frame\n");
|
|
else if (ieee80211_is_assoc_request(fc))
|
|
IWL_DEBUG_TX("Sending ASSOC frame\n");
|
|
else if (ieee80211_is_reassoc_request(fc))
|
|
IWL_DEBUG_TX("Sending REASSOC frame\n");
|
|
#endif
|
|
|
|
/* drop all data frame if we are not associated */
|
|
if (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
|
|
(!iwl4965_is_associated(priv) ||
|
|
!priv->assoc_id ||
|
|
!priv->assoc_station_added)) {
|
|
IWL_DEBUG_DROP("Dropping - !iwl4965_is_associated\n");
|
|
goto drop_unlock;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
hdr_len = ieee80211_get_hdrlen(fc);
|
|
|
|
/* Find (or create) index into station table for destination station */
|
|
sta_id = iwl4965_get_sta_id(priv, hdr);
|
|
if (sta_id == IWL_INVALID_STATION) {
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n",
|
|
print_mac(mac, hdr->addr1));
|
|
goto drop;
|
|
}
|
|
|
|
IWL_DEBUG_RATE("station Id %d\n", sta_id);
|
|
|
|
qc = ieee80211_get_qos_ctrl(hdr);
|
|
if (qc) {
|
|
u8 tid = (u8)(le16_to_cpu(*qc) & 0xf);
|
|
seq_number = priv->stations[sta_id].tid[tid].seq_number &
|
|
IEEE80211_SCTL_SEQ;
|
|
hdr->seq_ctrl = cpu_to_le16(seq_number) |
|
|
(hdr->seq_ctrl &
|
|
__constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
|
|
seq_number += 0x10;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
/* aggregation is on for this <sta,tid> */
|
|
if (ctl->flags & IEEE80211_TXCTL_HT_MPDU_AGG)
|
|
txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
}
|
|
|
|
/* Descriptor for chosen Tx queue */
|
|
txq = &priv->txq[txq_id];
|
|
q = &txq->q;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/* Set up first empty TFD within this queue's circular TFD buffer */
|
|
tfd = &txq->bd[q->write_ptr];
|
|
memset(tfd, 0, sizeof(*tfd));
|
|
control_flags = (u32 *) tfd;
|
|
idx = get_cmd_index(q, q->write_ptr, 0);
|
|
|
|
/* Set up driver data for this TFD */
|
|
memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl4965_tx_info));
|
|
txq->txb[q->write_ptr].skb[0] = skb;
|
|
memcpy(&(txq->txb[q->write_ptr].status.control),
|
|
ctl, sizeof(struct ieee80211_tx_control));
|
|
|
|
/* Set up first empty entry in queue's array of Tx/cmd buffers */
|
|
out_cmd = &txq->cmd[idx];
|
|
memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
|
|
memset(&out_cmd->cmd.tx, 0, sizeof(out_cmd->cmd.tx));
|
|
|
|
/*
|
|
* Set up the Tx-command (not MAC!) header.
|
|
* Store the chosen Tx queue and TFD index within the sequence field;
|
|
* after Tx, uCode's Tx response will return this value so driver can
|
|
* locate the frame within the tx queue and do post-tx processing.
|
|
*/
|
|
out_cmd->hdr.cmd = REPLY_TX;
|
|
out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
|
|
INDEX_TO_SEQ(q->write_ptr)));
|
|
|
|
/* Copy MAC header from skb into command buffer */
|
|
memcpy(out_cmd->cmd.tx.hdr, hdr, hdr_len);
|
|
|
|
/*
|
|
* Use the first empty entry in this queue's command buffer array
|
|
* to contain the Tx command and MAC header concatenated together
|
|
* (payload data will be in another buffer).
|
|
* Size of this varies, due to varying MAC header length.
|
|
* If end is not dword aligned, we'll have 2 extra bytes at the end
|
|
* of the MAC header (device reads on dword boundaries).
|
|
* We'll tell device about this padding later.
|
|
*/
|
|
len = priv->hw_setting.tx_cmd_len +
|
|
sizeof(struct iwl4965_cmd_header) + hdr_len;
|
|
|
|
len_org = len;
|
|
len = (len + 3) & ~3;
|
|
|
|
if (len_org != len)
|
|
len_org = 1;
|
|
else
|
|
len_org = 0;
|
|
|
|
/* Physical address of this Tx command's header (not MAC header!),
|
|
* within command buffer array. */
|
|
txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl4965_cmd) * idx +
|
|
offsetof(struct iwl4965_cmd, hdr);
|
|
|
|
/* Add buffer containing Tx command and MAC(!) header to TFD's
|
|
* first entry */
|
|
iwl4965_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
|
|
|
|
if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT))
|
|
iwl4965_build_tx_cmd_hwcrypto(priv, ctl, out_cmd, skb, 0);
|
|
|
|
/* Set up TFD's 2nd entry to point directly to remainder of skb,
|
|
* if any (802.11 null frames have no payload). */
|
|
len = skb->len - hdr_len;
|
|
if (len) {
|
|
phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
|
|
len, PCI_DMA_TODEVICE);
|
|
iwl4965_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len);
|
|
}
|
|
|
|
/* Tell 4965 about any 2-byte padding after MAC header */
|
|
if (len_org)
|
|
out_cmd->cmd.tx.tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
|
|
|
|
/* Total # bytes to be transmitted */
|
|
len = (u16)skb->len;
|
|
out_cmd->cmd.tx.len = cpu_to_le16(len);
|
|
|
|
/* TODO need this for burst mode later on */
|
|
iwl4965_build_tx_cmd_basic(priv, out_cmd, ctl, hdr, unicast, sta_id);
|
|
|
|
/* set is_hcca to 0; it probably will never be implemented */
|
|
iwl4965_hw_build_tx_cmd_rate(priv, out_cmd, ctl, hdr, sta_id, 0);
|
|
|
|
scratch_phys = txcmd_phys + sizeof(struct iwl4965_cmd_header) +
|
|
offsetof(struct iwl4965_tx_cmd, scratch);
|
|
out_cmd->cmd.tx.dram_lsb_ptr = cpu_to_le32(scratch_phys);
|
|
out_cmd->cmd.tx.dram_msb_ptr = iwl_get_dma_hi_address(scratch_phys);
|
|
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
#ifdef CONFIG_IWL4965_HT
|
|
/* TODO: move this functionality to rate scaling */
|
|
iwl4965_tl_get_stats(priv, hdr);
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /*CONFIG_IWL4965_HT */
|
|
|
|
|
|
if (!ieee80211_get_morefrag(hdr)) {
|
|
txq->need_update = 1;
|
|
if (qc) {
|
|
u8 tid = (u8)(le16_to_cpu(*qc) & 0xf);
|
|
priv->stations[sta_id].tid[tid].seq_number = seq_number;
|
|
}
|
|
} else {
|
|
wait_write_ptr = 1;
|
|
txq->need_update = 0;
|
|
}
|
|
|
|
iwl4965_print_hex_dump(IWL_DL_TX, out_cmd->cmd.payload,
|
|
sizeof(out_cmd->cmd.tx));
|
|
|
|
iwl4965_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr,
|
|
ieee80211_get_hdrlen(fc));
|
|
|
|
/* Set up entry for this TFD in Tx byte-count array */
|
|
iwl4965_tx_queue_update_wr_ptr(priv, txq, len);
|
|
|
|
/* Tell device the write index *just past* this latest filled TFD */
|
|
q->write_ptr = iwl4965_queue_inc_wrap(q->write_ptr, q->n_bd);
|
|
rc = iwl4965_tx_queue_update_write_ptr(priv, txq);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
if (rc)
|
|
return rc;
|
|
|
|
if ((iwl4965_queue_space(q) < q->high_mark)
|
|
&& priv->mac80211_registered) {
|
|
if (wait_write_ptr) {
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
txq->need_update = 1;
|
|
iwl4965_tx_queue_update_write_ptr(priv, txq);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
ieee80211_stop_queue(priv->hw, ctl->queue);
|
|
}
|
|
|
|
return 0;
|
|
|
|
drop_unlock:
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
drop:
|
|
return -1;
|
|
}
|
|
|
|
static void iwl4965_set_rate(struct iwl4965_priv *priv)
|
|
{
|
|
const struct ieee80211_hw_mode *hw = NULL;
|
|
struct ieee80211_rate *rate;
|
|
int i;
|
|
|
|
hw = iwl4965_get_hw_mode(priv, priv->phymode);
|
|
if (!hw) {
|
|
IWL_ERROR("Failed to set rate: unable to get hw mode\n");
|
|
return;
|
|
}
|
|
|
|
priv->active_rate = 0;
|
|
priv->active_rate_basic = 0;
|
|
|
|
IWL_DEBUG_RATE("Setting rates for 802.11%c\n",
|
|
hw->mode == MODE_IEEE80211A ?
|
|
'a' : ((hw->mode == MODE_IEEE80211B) ? 'b' : 'g'));
|
|
|
|
for (i = 0; i < hw->num_rates; i++) {
|
|
rate = &(hw->rates[i]);
|
|
if ((rate->val < IWL_RATE_COUNT) &&
|
|
(rate->flags & IEEE80211_RATE_SUPPORTED)) {
|
|
IWL_DEBUG_RATE("Adding rate index %d (plcp %d)%s\n",
|
|
rate->val, iwl4965_rates[rate->val].plcp,
|
|
(rate->flags & IEEE80211_RATE_BASIC) ?
|
|
"*" : "");
|
|
priv->active_rate |= (1 << rate->val);
|
|
if (rate->flags & IEEE80211_RATE_BASIC)
|
|
priv->active_rate_basic |= (1 << rate->val);
|
|
} else
|
|
IWL_DEBUG_RATE("Not adding rate %d (plcp %d)\n",
|
|
rate->val, iwl4965_rates[rate->val].plcp);
|
|
}
|
|
|
|
IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
|
|
priv->active_rate, priv->active_rate_basic);
|
|
|
|
/*
|
|
* If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
|
|
* otherwise set it to the default of all CCK rates and 6, 12, 24 for
|
|
* OFDM
|
|
*/
|
|
if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
|
|
priv->staging_rxon.cck_basic_rates =
|
|
((priv->active_rate_basic &
|
|
IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
|
|
else
|
|
priv->staging_rxon.cck_basic_rates =
|
|
(IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
|
|
|
|
if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
|
|
priv->staging_rxon.ofdm_basic_rates =
|
|
((priv->active_rate_basic &
|
|
(IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
|
|
IWL_FIRST_OFDM_RATE) & 0xFF;
|
|
else
|
|
priv->staging_rxon.ofdm_basic_rates =
|
|
(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
|
|
}
|
|
|
|
static void iwl4965_radio_kill_sw(struct iwl4965_priv *priv, int disable_radio)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!!disable_radio == test_bit(STATUS_RF_KILL_SW, &priv->status))
|
|
return;
|
|
|
|
IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n",
|
|
disable_radio ? "OFF" : "ON");
|
|
|
|
if (disable_radio) {
|
|
iwl4965_scan_cancel(priv);
|
|
/* FIXME: This is a workaround for AP */
|
|
if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_SET,
|
|
CSR_UCODE_SW_BIT_RFKILL);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
iwl4965_send_card_state(priv, CARD_STATE_CMD_DISABLE, 0);
|
|
set_bit(STATUS_RF_KILL_SW, &priv->status);
|
|
}
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
|
|
|
|
clear_bit(STATUS_RF_KILL_SW, &priv->status);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
/* wake up ucode */
|
|
msleep(10);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
iwl4965_read32(priv, CSR_UCODE_DRV_GP1);
|
|
if (!iwl4965_grab_nic_access(priv))
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
|
|
IWL_DEBUG_RF_KILL("Can not turn radio back on - "
|
|
"disabled by HW switch\n");
|
|
return;
|
|
}
|
|
|
|
queue_work(priv->workqueue, &priv->restart);
|
|
return;
|
|
}
|
|
|
|
void iwl4965_set_decrypted_flag(struct iwl4965_priv *priv, struct sk_buff *skb,
|
|
u32 decrypt_res, struct ieee80211_rx_status *stats)
|
|
{
|
|
u16 fc =
|
|
le16_to_cpu(((struct ieee80211_hdr *)skb->data)->frame_control);
|
|
|
|
if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK)
|
|
return;
|
|
|
|
if (!(fc & IEEE80211_FCTL_PROTECTED))
|
|
return;
|
|
|
|
IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res);
|
|
switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
|
|
case RX_RES_STATUS_SEC_TYPE_TKIP:
|
|
if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
|
|
RX_RES_STATUS_BAD_ICV_MIC)
|
|
stats->flag |= RX_FLAG_MMIC_ERROR;
|
|
case RX_RES_STATUS_SEC_TYPE_WEP:
|
|
case RX_RES_STATUS_SEC_TYPE_CCMP:
|
|
if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
|
|
RX_RES_STATUS_DECRYPT_OK) {
|
|
IWL_DEBUG_RX("hw decrypt successfully!!!\n");
|
|
stats->flag |= RX_FLAG_DECRYPTED;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
#define IWL_PACKET_RETRY_TIME HZ
|
|
|
|
int iwl4965_is_duplicate_packet(struct iwl4965_priv *priv, struct ieee80211_hdr *header)
|
|
{
|
|
u16 sc = le16_to_cpu(header->seq_ctrl);
|
|
u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
|
|
u16 frag = sc & IEEE80211_SCTL_FRAG;
|
|
u16 *last_seq, *last_frag;
|
|
unsigned long *last_time;
|
|
|
|
switch (priv->iw_mode) {
|
|
case IEEE80211_IF_TYPE_IBSS:{
|
|
struct list_head *p;
|
|
struct iwl4965_ibss_seq *entry = NULL;
|
|
u8 *mac = header->addr2;
|
|
int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1);
|
|
|
|
__list_for_each(p, &priv->ibss_mac_hash[index]) {
|
|
entry = list_entry(p, struct iwl4965_ibss_seq, list);
|
|
if (!compare_ether_addr(entry->mac, mac))
|
|
break;
|
|
}
|
|
if (p == &priv->ibss_mac_hash[index]) {
|
|
entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
|
|
if (!entry) {
|
|
IWL_ERROR("Cannot malloc new mac entry\n");
|
|
return 0;
|
|
}
|
|
memcpy(entry->mac, mac, ETH_ALEN);
|
|
entry->seq_num = seq;
|
|
entry->frag_num = frag;
|
|
entry->packet_time = jiffies;
|
|
list_add(&entry->list, &priv->ibss_mac_hash[index]);
|
|
return 0;
|
|
}
|
|
last_seq = &entry->seq_num;
|
|
last_frag = &entry->frag_num;
|
|
last_time = &entry->packet_time;
|
|
break;
|
|
}
|
|
case IEEE80211_IF_TYPE_STA:
|
|
last_seq = &priv->last_seq_num;
|
|
last_frag = &priv->last_frag_num;
|
|
last_time = &priv->last_packet_time;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
if ((*last_seq == seq) &&
|
|
time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) {
|
|
if (*last_frag == frag)
|
|
goto drop;
|
|
if (*last_frag + 1 != frag)
|
|
/* out-of-order fragment */
|
|
goto drop;
|
|
} else
|
|
*last_seq = seq;
|
|
|
|
*last_frag = frag;
|
|
*last_time = jiffies;
|
|
return 0;
|
|
|
|
drop:
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
|
|
|
|
#include "iwl-spectrum.h"
|
|
|
|
#define BEACON_TIME_MASK_LOW 0x00FFFFFF
|
|
#define BEACON_TIME_MASK_HIGH 0xFF000000
|
|
#define TIME_UNIT 1024
|
|
|
|
/*
|
|
* extended beacon time format
|
|
* time in usec will be changed into a 32-bit value in 8:24 format
|
|
* the high 1 byte is the beacon counts
|
|
* the lower 3 bytes is the time in usec within one beacon interval
|
|
*/
|
|
|
|
static u32 iwl4965_usecs_to_beacons(u32 usec, u32 beacon_interval)
|
|
{
|
|
u32 quot;
|
|
u32 rem;
|
|
u32 interval = beacon_interval * 1024;
|
|
|
|
if (!interval || !usec)
|
|
return 0;
|
|
|
|
quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24);
|
|
rem = (usec % interval) & BEACON_TIME_MASK_LOW;
|
|
|
|
return (quot << 24) + rem;
|
|
}
|
|
|
|
/* base is usually what we get from ucode with each received frame,
|
|
* the same as HW timer counter counting down
|
|
*/
|
|
|
|
static __le32 iwl4965_add_beacon_time(u32 base, u32 addon, u32 beacon_interval)
|
|
{
|
|
u32 base_low = base & BEACON_TIME_MASK_LOW;
|
|
u32 addon_low = addon & BEACON_TIME_MASK_LOW;
|
|
u32 interval = beacon_interval * TIME_UNIT;
|
|
u32 res = (base & BEACON_TIME_MASK_HIGH) +
|
|
(addon & BEACON_TIME_MASK_HIGH);
|
|
|
|
if (base_low > addon_low)
|
|
res += base_low - addon_low;
|
|
else if (base_low < addon_low) {
|
|
res += interval + base_low - addon_low;
|
|
res += (1 << 24);
|
|
} else
|
|
res += (1 << 24);
|
|
|
|
return cpu_to_le32(res);
|
|
}
|
|
|
|
static int iwl4965_get_measurement(struct iwl4965_priv *priv,
|
|
struct ieee80211_measurement_params *params,
|
|
u8 type)
|
|
{
|
|
struct iwl4965_spectrum_cmd spectrum;
|
|
struct iwl4965_rx_packet *res;
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
|
|
.data = (void *)&spectrum,
|
|
.meta.flags = CMD_WANT_SKB,
|
|
};
|
|
u32 add_time = le64_to_cpu(params->start_time);
|
|
int rc;
|
|
int spectrum_resp_status;
|
|
int duration = le16_to_cpu(params->duration);
|
|
|
|
if (iwl4965_is_associated(priv))
|
|
add_time =
|
|
iwl4965_usecs_to_beacons(
|
|
le64_to_cpu(params->start_time) - priv->last_tsf,
|
|
le16_to_cpu(priv->rxon_timing.beacon_interval));
|
|
|
|
memset(&spectrum, 0, sizeof(spectrum));
|
|
|
|
spectrum.channel_count = cpu_to_le16(1);
|
|
spectrum.flags =
|
|
RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
|
|
spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
|
|
cmd.len = sizeof(spectrum);
|
|
spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
|
|
|
|
if (iwl4965_is_associated(priv))
|
|
spectrum.start_time =
|
|
iwl4965_add_beacon_time(priv->last_beacon_time,
|
|
add_time,
|
|
le16_to_cpu(priv->rxon_timing.beacon_interval));
|
|
else
|
|
spectrum.start_time = 0;
|
|
|
|
spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
|
|
spectrum.channels[0].channel = params->channel;
|
|
spectrum.channels[0].type = type;
|
|
if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
|
|
spectrum.flags |= RXON_FLG_BAND_24G_MSK |
|
|
RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
|
|
|
|
rc = iwl4965_send_cmd_sync(priv, &cmd);
|
|
if (rc)
|
|
return rc;
|
|
|
|
res = (struct iwl4965_rx_packet *)cmd.meta.u.skb->data;
|
|
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
|
|
IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n");
|
|
rc = -EIO;
|
|
}
|
|
|
|
spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
|
|
switch (spectrum_resp_status) {
|
|
case 0: /* Command will be handled */
|
|
if (res->u.spectrum.id != 0xff) {
|
|
IWL_DEBUG_INFO
|
|
("Replaced existing measurement: %d\n",
|
|
res->u.spectrum.id);
|
|
priv->measurement_status &= ~MEASUREMENT_READY;
|
|
}
|
|
priv->measurement_status |= MEASUREMENT_ACTIVE;
|
|
rc = 0;
|
|
break;
|
|
|
|
case 1: /* Command will not be handled */
|
|
rc = -EAGAIN;
|
|
break;
|
|
}
|
|
|
|
dev_kfree_skb_any(cmd.meta.u.skb);
|
|
|
|
return rc;
|
|
}
|
|
#endif
|
|
|
|
static void iwl4965_txstatus_to_ieee(struct iwl4965_priv *priv,
|
|
struct iwl4965_tx_info *tx_sta)
|
|
{
|
|
|
|
tx_sta->status.ack_signal = 0;
|
|
tx_sta->status.excessive_retries = 0;
|
|
tx_sta->status.queue_length = 0;
|
|
tx_sta->status.queue_number = 0;
|
|
|
|
if (in_interrupt())
|
|
ieee80211_tx_status_irqsafe(priv->hw,
|
|
tx_sta->skb[0], &(tx_sta->status));
|
|
else
|
|
ieee80211_tx_status(priv->hw,
|
|
tx_sta->skb[0], &(tx_sta->status));
|
|
|
|
tx_sta->skb[0] = NULL;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
|
|
*
|
|
* When FW advances 'R' index, all entries between old and new 'R' index
|
|
* need to be reclaimed. As result, some free space forms. If there is
|
|
* enough free space (> low mark), wake the stack that feeds us.
|
|
*/
|
|
int iwl4965_tx_queue_reclaim(struct iwl4965_priv *priv, int txq_id, int index)
|
|
{
|
|
struct iwl4965_tx_queue *txq = &priv->txq[txq_id];
|
|
struct iwl4965_queue *q = &txq->q;
|
|
int nfreed = 0;
|
|
|
|
if ((index >= q->n_bd) || (x2_queue_used(q, index) == 0)) {
|
|
IWL_ERROR("Read index for DMA queue txq id (%d), index %d, "
|
|
"is out of range [0-%d] %d %d.\n", txq_id,
|
|
index, q->n_bd, q->write_ptr, q->read_ptr);
|
|
return 0;
|
|
}
|
|
|
|
for (index = iwl4965_queue_inc_wrap(index, q->n_bd);
|
|
q->read_ptr != index;
|
|
q->read_ptr = iwl4965_queue_inc_wrap(q->read_ptr, q->n_bd)) {
|
|
if (txq_id != IWL_CMD_QUEUE_NUM) {
|
|
iwl4965_txstatus_to_ieee(priv,
|
|
&(txq->txb[txq->q.read_ptr]));
|
|
iwl4965_hw_txq_free_tfd(priv, txq);
|
|
} else if (nfreed > 1) {
|
|
IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index,
|
|
q->write_ptr, q->read_ptr);
|
|
queue_work(priv->workqueue, &priv->restart);
|
|
}
|
|
nfreed++;
|
|
}
|
|
|
|
if (iwl4965_queue_space(q) > q->low_mark && (txq_id >= 0) &&
|
|
(txq_id != IWL_CMD_QUEUE_NUM) &&
|
|
priv->mac80211_registered)
|
|
ieee80211_wake_queue(priv->hw, txq_id);
|
|
|
|
|
|
return nfreed;
|
|
}
|
|
|
|
static int iwl4965_is_tx_success(u32 status)
|
|
{
|
|
status &= TX_STATUS_MSK;
|
|
return (status == TX_STATUS_SUCCESS)
|
|
|| (status == TX_STATUS_DIRECT_DONE);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* Generic RX handler implementations
|
|
*
|
|
******************************************************************************/
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
|
|
static inline int iwl4965_get_ra_sta_id(struct iwl4965_priv *priv,
|
|
struct ieee80211_hdr *hdr)
|
|
{
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_STA)
|
|
return IWL_AP_ID;
|
|
else {
|
|
u8 *da = ieee80211_get_DA(hdr);
|
|
return iwl4965_hw_find_station(priv, da);
|
|
}
|
|
}
|
|
|
|
static struct ieee80211_hdr *iwl4965_tx_queue_get_hdr(
|
|
struct iwl4965_priv *priv, int txq_id, int idx)
|
|
{
|
|
if (priv->txq[txq_id].txb[idx].skb[0])
|
|
return (struct ieee80211_hdr *)priv->txq[txq_id].
|
|
txb[idx].skb[0]->data;
|
|
return NULL;
|
|
}
|
|
|
|
static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
|
|
{
|
|
__le32 *scd_ssn = (__le32 *)((u32 *)&tx_resp->status +
|
|
tx_resp->frame_count);
|
|
return le32_to_cpu(*scd_ssn) & MAX_SN;
|
|
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue
|
|
*/
|
|
static int iwl4965_tx_status_reply_tx(struct iwl4965_priv *priv,
|
|
struct iwl4965_ht_agg *agg,
|
|
struct iwl4965_tx_resp *tx_resp,
|
|
u16 start_idx)
|
|
{
|
|
u32 status;
|
|
__le32 *frame_status = &tx_resp->status;
|
|
struct ieee80211_tx_status *tx_status = NULL;
|
|
struct ieee80211_hdr *hdr = NULL;
|
|
int i, sh;
|
|
int txq_id, idx;
|
|
u16 seq;
|
|
|
|
if (agg->wait_for_ba)
|
|
IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n");
|
|
|
|
agg->frame_count = tx_resp->frame_count;
|
|
agg->start_idx = start_idx;
|
|
agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
|
|
agg->bitmap0 = agg->bitmap1 = 0;
|
|
|
|
/* # frames attempted by Tx command */
|
|
if (agg->frame_count == 1) {
|
|
/* Only one frame was attempted; no block-ack will arrive */
|
|
struct iwl4965_tx_queue *txq ;
|
|
status = le32_to_cpu(frame_status[0]);
|
|
|
|
txq_id = agg->txq_id;
|
|
txq = &priv->txq[txq_id];
|
|
/* FIXME: code repetition */
|
|
IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d \n",
|
|
agg->frame_count, agg->start_idx);
|
|
|
|
tx_status = &(priv->txq[txq_id].txb[txq->q.read_ptr].status);
|
|
tx_status->retry_count = tx_resp->failure_frame;
|
|
tx_status->queue_number = status & 0xff;
|
|
tx_status->queue_length = tx_resp->bt_kill_count;
|
|
tx_status->queue_length |= tx_resp->failure_rts;
|
|
|
|
tx_status->flags = iwl4965_is_tx_success(status)?
|
|
IEEE80211_TX_STATUS_ACK : 0;
|
|
tx_status->control.tx_rate =
|
|
iwl4965_hw_get_rate_n_flags(tx_resp->rate_n_flags);
|
|
/* FIXME: code repetition end */
|
|
|
|
IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
|
|
status & 0xff, tx_resp->failure_frame);
|
|
IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n",
|
|
iwl4965_hw_get_rate_n_flags(tx_resp->rate_n_flags));
|
|
|
|
agg->wait_for_ba = 0;
|
|
} else {
|
|
/* Two or more frames were attempted; expect block-ack */
|
|
u64 bitmap = 0;
|
|
int start = agg->start_idx;
|
|
|
|
/* Construct bit-map of pending frames within Tx window */
|
|
for (i = 0; i < agg->frame_count; i++) {
|
|
u16 sc;
|
|
status = le32_to_cpu(frame_status[i]);
|
|
seq = status >> 16;
|
|
idx = SEQ_TO_INDEX(seq);
|
|
txq_id = SEQ_TO_QUEUE(seq);
|
|
|
|
if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
|
|
AGG_TX_STATE_ABORT_MSK))
|
|
continue;
|
|
|
|
IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
|
|
agg->frame_count, txq_id, idx);
|
|
|
|
hdr = iwl4965_tx_queue_get_hdr(priv, txq_id, idx);
|
|
|
|
sc = le16_to_cpu(hdr->seq_ctrl);
|
|
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
|
|
IWL_ERROR("BUG_ON idx doesn't match seq control"
|
|
" idx=%d, seq_idx=%d, seq=%d\n",
|
|
idx, SEQ_TO_SN(sc),
|
|
hdr->seq_ctrl);
|
|
return -1;
|
|
}
|
|
|
|
IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
|
|
i, idx, SEQ_TO_SN(sc));
|
|
|
|
sh = idx - start;
|
|
if (sh > 64) {
|
|
sh = (start - idx) + 0xff;
|
|
bitmap = bitmap << sh;
|
|
sh = 0;
|
|
start = idx;
|
|
} else if (sh < -64)
|
|
sh = 0xff - (start - idx);
|
|
else if (sh < 0) {
|
|
sh = start - idx;
|
|
start = idx;
|
|
bitmap = bitmap << sh;
|
|
sh = 0;
|
|
}
|
|
bitmap |= (1 << sh);
|
|
IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n",
|
|
start, (u32)(bitmap & 0xFFFFFFFF));
|
|
}
|
|
|
|
agg->bitmap0 = bitmap & 0xFFFFFFFF;
|
|
agg->bitmap1 = bitmap >> 32;
|
|
agg->start_idx = start;
|
|
agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
|
|
IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%x\n",
|
|
agg->frame_count, agg->start_idx,
|
|
agg->bitmap0);
|
|
|
|
if (bitmap)
|
|
agg->wait_for_ba = 1;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
/**
|
|
* iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
|
|
*/
|
|
static void iwl4965_rx_reply_tx(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
u16 sequence = le16_to_cpu(pkt->hdr.sequence);
|
|
int txq_id = SEQ_TO_QUEUE(sequence);
|
|
int index = SEQ_TO_INDEX(sequence);
|
|
struct iwl4965_tx_queue *txq = &priv->txq[txq_id];
|
|
struct ieee80211_tx_status *tx_status;
|
|
struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
|
|
u32 status = le32_to_cpu(tx_resp->status);
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
int tid, sta_id;
|
|
#endif
|
|
#endif
|
|
|
|
if ((index >= txq->q.n_bd) || (x2_queue_used(&txq->q, index) == 0)) {
|
|
IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
|
|
"is out of range [0-%d] %d %d\n", txq_id,
|
|
index, txq->q.n_bd, txq->q.write_ptr,
|
|
txq->q.read_ptr);
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
if (txq->sched_retry) {
|
|
const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp);
|
|
struct ieee80211_hdr *hdr =
|
|
iwl4965_tx_queue_get_hdr(priv, txq_id, index);
|
|
struct iwl4965_ht_agg *agg = NULL;
|
|
__le16 *qc = ieee80211_get_qos_ctrl(hdr);
|
|
|
|
if (qc == NULL) {
|
|
IWL_ERROR("BUG_ON qc is null!!!!\n");
|
|
return;
|
|
}
|
|
|
|
tid = le16_to_cpu(*qc) & 0xf;
|
|
|
|
sta_id = iwl4965_get_ra_sta_id(priv, hdr);
|
|
if (unlikely(sta_id == IWL_INVALID_STATION)) {
|
|
IWL_ERROR("Station not known for\n");
|
|
return;
|
|
}
|
|
|
|
agg = &priv->stations[sta_id].tid[tid].agg;
|
|
|
|
iwl4965_tx_status_reply_tx(priv, agg, tx_resp, index);
|
|
|
|
if ((tx_resp->frame_count == 1) &&
|
|
!iwl4965_is_tx_success(status)) {
|
|
/* TODO: send BAR */
|
|
}
|
|
|
|
if ((txq->q.read_ptr != (scd_ssn & 0xff))) {
|
|
index = iwl4965_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
|
|
IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn "
|
|
"%d index %d\n", scd_ssn , index);
|
|
iwl4965_tx_queue_reclaim(priv, txq_id, index);
|
|
}
|
|
} else {
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
tx_status = &(txq->txb[txq->q.read_ptr].status);
|
|
|
|
tx_status->retry_count = tx_resp->failure_frame;
|
|
tx_status->queue_number = status;
|
|
tx_status->queue_length = tx_resp->bt_kill_count;
|
|
tx_status->queue_length |= tx_resp->failure_rts;
|
|
|
|
tx_status->flags =
|
|
iwl4965_is_tx_success(status) ? IEEE80211_TX_STATUS_ACK : 0;
|
|
|
|
tx_status->control.tx_rate =
|
|
iwl4965_hw_get_rate_n_flags(tx_resp->rate_n_flags);
|
|
|
|
IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) rate_n_flags 0x%x "
|
|
"retries %d\n", txq_id, iwl4965_get_tx_fail_reason(status),
|
|
status, le32_to_cpu(tx_resp->rate_n_flags),
|
|
tx_resp->failure_frame);
|
|
|
|
IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
|
|
if (index != -1)
|
|
iwl4965_tx_queue_reclaim(priv, txq_id, index);
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
}
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
|
|
IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n");
|
|
}
|
|
|
|
|
|
static void iwl4965_rx_reply_alive(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_alive_resp *palive;
|
|
struct delayed_work *pwork;
|
|
|
|
palive = &pkt->u.alive_frame;
|
|
|
|
IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
|
|
"0x%01X 0x%01X\n",
|
|
palive->is_valid, palive->ver_type,
|
|
palive->ver_subtype);
|
|
|
|
if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
|
|
IWL_DEBUG_INFO("Initialization Alive received.\n");
|
|
memcpy(&priv->card_alive_init,
|
|
&pkt->u.alive_frame,
|
|
sizeof(struct iwl4965_init_alive_resp));
|
|
pwork = &priv->init_alive_start;
|
|
} else {
|
|
IWL_DEBUG_INFO("Runtime Alive received.\n");
|
|
memcpy(&priv->card_alive, &pkt->u.alive_frame,
|
|
sizeof(struct iwl4965_alive_resp));
|
|
pwork = &priv->alive_start;
|
|
}
|
|
|
|
/* We delay the ALIVE response by 5ms to
|
|
* give the HW RF Kill time to activate... */
|
|
if (palive->is_valid == UCODE_VALID_OK)
|
|
queue_delayed_work(priv->workqueue, pwork,
|
|
msecs_to_jiffies(5));
|
|
else
|
|
IWL_WARNING("uCode did not respond OK.\n");
|
|
}
|
|
|
|
static void iwl4965_rx_reply_add_sta(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
|
|
IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
|
|
return;
|
|
}
|
|
|
|
static void iwl4965_rx_reply_error(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
|
|
IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) "
|
|
"seq 0x%04X ser 0x%08X\n",
|
|
le32_to_cpu(pkt->u.err_resp.error_type),
|
|
get_cmd_string(pkt->u.err_resp.cmd_id),
|
|
pkt->u.err_resp.cmd_id,
|
|
le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
|
|
le32_to_cpu(pkt->u.err_resp.error_info));
|
|
}
|
|
|
|
#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
|
|
|
|
static void iwl4965_rx_csa(struct iwl4965_priv *priv, struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_rxon_cmd *rxon = (void *)&priv->active_rxon;
|
|
struct iwl4965_csa_notification *csa = &(pkt->u.csa_notif);
|
|
IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
|
|
le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
|
|
rxon->channel = csa->channel;
|
|
priv->staging_rxon.channel = csa->channel;
|
|
}
|
|
|
|
static void iwl4965_rx_spectrum_measure_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif);
|
|
|
|
if (!report->state) {
|
|
IWL_DEBUG(IWL_DL_11H | IWL_DL_INFO,
|
|
"Spectrum Measure Notification: Start\n");
|
|
return;
|
|
}
|
|
|
|
memcpy(&priv->measure_report, report, sizeof(*report));
|
|
priv->measurement_status |= MEASUREMENT_READY;
|
|
#endif
|
|
}
|
|
|
|
static void iwl4965_rx_pm_sleep_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_sleep_notification *sleep = &(pkt->u.sleep_notif);
|
|
IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
|
|
sleep->pm_sleep_mode, sleep->pm_wakeup_src);
|
|
#endif
|
|
}
|
|
|
|
static void iwl4965_rx_pm_debug_statistics_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
|
|
"notification for %s:\n",
|
|
le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
|
|
iwl4965_print_hex_dump(IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
|
|
}
|
|
|
|
static void iwl4965_bg_beacon_update(struct work_struct *work)
|
|
{
|
|
struct iwl4965_priv *priv =
|
|
container_of(work, struct iwl4965_priv, beacon_update);
|
|
struct sk_buff *beacon;
|
|
|
|
/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
|
|
beacon = ieee80211_beacon_get(priv->hw, priv->vif, NULL);
|
|
|
|
if (!beacon) {
|
|
IWL_ERROR("update beacon failed\n");
|
|
return;
|
|
}
|
|
|
|
mutex_lock(&priv->mutex);
|
|
/* new beacon skb is allocated every time; dispose previous.*/
|
|
if (priv->ibss_beacon)
|
|
dev_kfree_skb(priv->ibss_beacon);
|
|
|
|
priv->ibss_beacon = beacon;
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
iwl4965_send_beacon_cmd(priv);
|
|
}
|
|
|
|
static void iwl4965_rx_beacon_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_beacon_notif *beacon = &(pkt->u.beacon_status);
|
|
u8 rate = iwl4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
|
|
|
|
IWL_DEBUG_RX("beacon status %x retries %d iss %d "
|
|
"tsf %d %d rate %d\n",
|
|
le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
|
|
beacon->beacon_notify_hdr.failure_frame,
|
|
le32_to_cpu(beacon->ibss_mgr_status),
|
|
le32_to_cpu(beacon->high_tsf),
|
|
le32_to_cpu(beacon->low_tsf), rate);
|
|
#endif
|
|
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
|
|
(!test_bit(STATUS_EXIT_PENDING, &priv->status)))
|
|
queue_work(priv->workqueue, &priv->beacon_update);
|
|
}
|
|
|
|
/* Service response to REPLY_SCAN_CMD (0x80) */
|
|
static void iwl4965_rx_reply_scan(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_scanreq_notification *notif =
|
|
(struct iwl4965_scanreq_notification *)pkt->u.raw;
|
|
|
|
IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
|
|
#endif
|
|
}
|
|
|
|
/* Service SCAN_START_NOTIFICATION (0x82) */
|
|
static void iwl4965_rx_scan_start_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_scanstart_notification *notif =
|
|
(struct iwl4965_scanstart_notification *)pkt->u.raw;
|
|
priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
|
|
IWL_DEBUG_SCAN("Scan start: "
|
|
"%d [802.11%s] "
|
|
"(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
|
|
notif->channel,
|
|
notif->band ? "bg" : "a",
|
|
notif->tsf_high,
|
|
notif->tsf_low, notif->status, notif->beacon_timer);
|
|
}
|
|
|
|
/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
|
|
static void iwl4965_rx_scan_results_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_scanresults_notification *notif =
|
|
(struct iwl4965_scanresults_notification *)pkt->u.raw;
|
|
|
|
IWL_DEBUG_SCAN("Scan ch.res: "
|
|
"%d [802.11%s] "
|
|
"(TSF: 0x%08X:%08X) - %d "
|
|
"elapsed=%lu usec (%dms since last)\n",
|
|
notif->channel,
|
|
notif->band ? "bg" : "a",
|
|
le32_to_cpu(notif->tsf_high),
|
|
le32_to_cpu(notif->tsf_low),
|
|
le32_to_cpu(notif->statistics[0]),
|
|
le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
|
|
jiffies_to_msecs(elapsed_jiffies
|
|
(priv->last_scan_jiffies, jiffies)));
|
|
|
|
priv->last_scan_jiffies = jiffies;
|
|
priv->next_scan_jiffies = 0;
|
|
}
|
|
|
|
/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
|
|
static void iwl4965_rx_scan_complete_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
|
|
|
|
IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
|
|
scan_notif->scanned_channels,
|
|
scan_notif->tsf_low,
|
|
scan_notif->tsf_high, scan_notif->status);
|
|
|
|
/* The HW is no longer scanning */
|
|
clear_bit(STATUS_SCAN_HW, &priv->status);
|
|
|
|
/* The scan completion notification came in, so kill that timer... */
|
|
cancel_delayed_work(&priv->scan_check);
|
|
|
|
IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
|
|
(priv->scan_bands == 2) ? "2.4" : "5.2",
|
|
jiffies_to_msecs(elapsed_jiffies
|
|
(priv->scan_pass_start, jiffies)));
|
|
|
|
/* Remove this scanned band from the list
|
|
* of pending bands to scan */
|
|
priv->scan_bands--;
|
|
|
|
/* If a request to abort was given, or the scan did not succeed
|
|
* then we reset the scan state machine and terminate,
|
|
* re-queuing another scan if one has been requested */
|
|
if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
|
|
IWL_DEBUG_INFO("Aborted scan completed.\n");
|
|
clear_bit(STATUS_SCAN_ABORTING, &priv->status);
|
|
} else {
|
|
/* If there are more bands on this scan pass reschedule */
|
|
if (priv->scan_bands > 0)
|
|
goto reschedule;
|
|
}
|
|
|
|
priv->last_scan_jiffies = jiffies;
|
|
priv->next_scan_jiffies = 0;
|
|
IWL_DEBUG_INFO("Setting scan to off\n");
|
|
|
|
clear_bit(STATUS_SCANNING, &priv->status);
|
|
|
|
IWL_DEBUG_INFO("Scan took %dms\n",
|
|
jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
|
|
|
|
queue_work(priv->workqueue, &priv->scan_completed);
|
|
|
|
return;
|
|
|
|
reschedule:
|
|
priv->scan_pass_start = jiffies;
|
|
queue_work(priv->workqueue, &priv->request_scan);
|
|
}
|
|
|
|
/* Handle notification from uCode that card's power state is changing
|
|
* due to software, hardware, or critical temperature RFKILL */
|
|
static void iwl4965_rx_card_state_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
|
|
unsigned long status = priv->status;
|
|
|
|
IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
|
|
(flags & HW_CARD_DISABLED) ? "Kill" : "On",
|
|
(flags & SW_CARD_DISABLED) ? "Kill" : "On");
|
|
|
|
if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
|
|
RF_CARD_DISABLED)) {
|
|
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_SET,
|
|
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
|
|
|
|
if (!iwl4965_grab_nic_access(priv)) {
|
|
iwl4965_write_direct32(
|
|
priv, HBUS_TARG_MBX_C,
|
|
HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
}
|
|
|
|
if (!(flags & RXON_CARD_DISABLED)) {
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR,
|
|
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
|
|
if (!iwl4965_grab_nic_access(priv)) {
|
|
iwl4965_write_direct32(
|
|
priv, HBUS_TARG_MBX_C,
|
|
HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
}
|
|
}
|
|
|
|
if (flags & RF_CARD_DISABLED) {
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_SET,
|
|
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
|
|
iwl4965_read32(priv, CSR_UCODE_DRV_GP1);
|
|
if (!iwl4965_grab_nic_access(priv))
|
|
iwl4965_release_nic_access(priv);
|
|
}
|
|
}
|
|
|
|
if (flags & HW_CARD_DISABLED)
|
|
set_bit(STATUS_RF_KILL_HW, &priv->status);
|
|
else
|
|
clear_bit(STATUS_RF_KILL_HW, &priv->status);
|
|
|
|
|
|
if (flags & SW_CARD_DISABLED)
|
|
set_bit(STATUS_RF_KILL_SW, &priv->status);
|
|
else
|
|
clear_bit(STATUS_RF_KILL_SW, &priv->status);
|
|
|
|
if (!(flags & RXON_CARD_DISABLED))
|
|
iwl4965_scan_cancel(priv);
|
|
|
|
if ((test_bit(STATUS_RF_KILL_HW, &status) !=
|
|
test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
|
|
(test_bit(STATUS_RF_KILL_SW, &status) !=
|
|
test_bit(STATUS_RF_KILL_SW, &priv->status)))
|
|
queue_work(priv->workqueue, &priv->rf_kill);
|
|
else
|
|
wake_up_interruptible(&priv->wait_command_queue);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_setup_rx_handlers - Initialize Rx handler callbacks
|
|
*
|
|
* Setup the RX handlers for each of the reply types sent from the uCode
|
|
* to the host.
|
|
*
|
|
* This function chains into the hardware specific files for them to setup
|
|
* any hardware specific handlers as well.
|
|
*/
|
|
static void iwl4965_setup_rx_handlers(struct iwl4965_priv *priv)
|
|
{
|
|
priv->rx_handlers[REPLY_ALIVE] = iwl4965_rx_reply_alive;
|
|
priv->rx_handlers[REPLY_ADD_STA] = iwl4965_rx_reply_add_sta;
|
|
priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error;
|
|
priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl4965_rx_csa;
|
|
priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
|
|
iwl4965_rx_spectrum_measure_notif;
|
|
priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl4965_rx_pm_sleep_notif;
|
|
priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
|
|
iwl4965_rx_pm_debug_statistics_notif;
|
|
priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif;
|
|
|
|
/*
|
|
* The same handler is used for both the REPLY to a discrete
|
|
* statistics request from the host as well as for the periodic
|
|
* statistics notifications (after received beacons) from the uCode.
|
|
*/
|
|
priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl4965_hw_rx_statistics;
|
|
priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl4965_hw_rx_statistics;
|
|
|
|
priv->rx_handlers[REPLY_SCAN_CMD] = iwl4965_rx_reply_scan;
|
|
priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl4965_rx_scan_start_notif;
|
|
priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
|
|
iwl4965_rx_scan_results_notif;
|
|
priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
|
|
iwl4965_rx_scan_complete_notif;
|
|
priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif;
|
|
priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
|
|
|
|
/* Set up hardware specific Rx handlers */
|
|
iwl4965_hw_rx_handler_setup(priv);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
|
|
* @rxb: Rx buffer to reclaim
|
|
*
|
|
* If an Rx buffer has an async callback associated with it the callback
|
|
* will be executed. The attached skb (if present) will only be freed
|
|
* if the callback returns 1
|
|
*/
|
|
static void iwl4965_tx_cmd_complete(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (struct iwl4965_rx_packet *)rxb->skb->data;
|
|
u16 sequence = le16_to_cpu(pkt->hdr.sequence);
|
|
int txq_id = SEQ_TO_QUEUE(sequence);
|
|
int index = SEQ_TO_INDEX(sequence);
|
|
int huge = sequence & SEQ_HUGE_FRAME;
|
|
int cmd_index;
|
|
struct iwl4965_cmd *cmd;
|
|
|
|
/* If a Tx command is being handled and it isn't in the actual
|
|
* command queue then there a command routing bug has been introduced
|
|
* in the queue management code. */
|
|
if (txq_id != IWL_CMD_QUEUE_NUM)
|
|
IWL_ERROR("Error wrong command queue %d command id 0x%X\n",
|
|
txq_id, pkt->hdr.cmd);
|
|
BUG_ON(txq_id != IWL_CMD_QUEUE_NUM);
|
|
|
|
cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
|
|
cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
|
|
|
|
/* Input error checking is done when commands are added to queue. */
|
|
if (cmd->meta.flags & CMD_WANT_SKB) {
|
|
cmd->meta.source->u.skb = rxb->skb;
|
|
rxb->skb = NULL;
|
|
} else if (cmd->meta.u.callback &&
|
|
!cmd->meta.u.callback(priv, cmd, rxb->skb))
|
|
rxb->skb = NULL;
|
|
|
|
iwl4965_tx_queue_reclaim(priv, txq_id, index);
|
|
|
|
if (!(cmd->meta.flags & CMD_ASYNC)) {
|
|
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
|
|
wake_up_interruptible(&priv->wait_command_queue);
|
|
}
|
|
}
|
|
|
|
/************************** RX-FUNCTIONS ****************************/
|
|
/*
|
|
* Rx theory of operation
|
|
*
|
|
* Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
|
|
* each of which point to Receive Buffers to be filled by 4965. These get
|
|
* used not only for Rx frames, but for any command response or notification
|
|
* from the 4965. The driver and 4965 manage the Rx buffers by means
|
|
* of indexes into the circular buffer.
|
|
*
|
|
* Rx Queue Indexes
|
|
* The host/firmware share two index registers for managing the Rx buffers.
|
|
*
|
|
* The READ index maps to the first position that the firmware may be writing
|
|
* to -- the driver can read up to (but not including) this position and get
|
|
* good data.
|
|
* The READ index is managed by the firmware once the card is enabled.
|
|
*
|
|
* The WRITE index maps to the last position the driver has read from -- the
|
|
* position preceding WRITE is the last slot the firmware can place a packet.
|
|
*
|
|
* The queue is empty (no good data) if WRITE = READ - 1, and is full if
|
|
* WRITE = READ.
|
|
*
|
|
* During initialization, the host sets up the READ queue position to the first
|
|
* INDEX position, and WRITE to the last (READ - 1 wrapped)
|
|
*
|
|
* When the firmware places a packet in a buffer, it will advance the READ index
|
|
* and fire the RX interrupt. The driver can then query the READ index and
|
|
* process as many packets as possible, moving the WRITE index forward as it
|
|
* resets the Rx queue buffers with new memory.
|
|
*
|
|
* The management in the driver is as follows:
|
|
* + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
|
|
* iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
|
|
* to replenish the iwl->rxq->rx_free.
|
|
* + In iwl4965_rx_replenish (scheduled) if 'processed' != 'read' then the
|
|
* iwl->rxq is replenished and the READ INDEX is updated (updating the
|
|
* 'processed' and 'read' driver indexes as well)
|
|
* + A received packet is processed and handed to the kernel network stack,
|
|
* detached from the iwl->rxq. The driver 'processed' index is updated.
|
|
* + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
|
|
* list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
|
|
* INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
|
|
* were enough free buffers and RX_STALLED is set it is cleared.
|
|
*
|
|
*
|
|
* Driver sequence:
|
|
*
|
|
* iwl4965_rx_queue_alloc() Allocates rx_free
|
|
* iwl4965_rx_replenish() Replenishes rx_free list from rx_used, and calls
|
|
* iwl4965_rx_queue_restock
|
|
* iwl4965_rx_queue_restock() Moves available buffers from rx_free into Rx
|
|
* queue, updates firmware pointers, and updates
|
|
* the WRITE index. If insufficient rx_free buffers
|
|
* are available, schedules iwl4965_rx_replenish
|
|
*
|
|
* -- enable interrupts --
|
|
* ISR - iwl4965_rx() Detach iwl4965_rx_mem_buffers from pool up to the
|
|
* READ INDEX, detaching the SKB from the pool.
|
|
* Moves the packet buffer from queue to rx_used.
|
|
* Calls iwl4965_rx_queue_restock to refill any empty
|
|
* slots.
|
|
* ...
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* iwl4965_rx_queue_space - Return number of free slots available in queue.
|
|
*/
|
|
static int iwl4965_rx_queue_space(const struct iwl4965_rx_queue *q)
|
|
{
|
|
int s = q->read - q->write;
|
|
if (s <= 0)
|
|
s += RX_QUEUE_SIZE;
|
|
/* keep some buffer to not confuse full and empty queue */
|
|
s -= 2;
|
|
if (s < 0)
|
|
s = 0;
|
|
return s;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_rx_queue_update_write_ptr - Update the write pointer for the RX queue
|
|
*/
|
|
int iwl4965_rx_queue_update_write_ptr(struct iwl4965_priv *priv, struct iwl4965_rx_queue *q)
|
|
{
|
|
u32 reg = 0;
|
|
int rc = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&q->lock, flags);
|
|
|
|
if (q->need_update == 0)
|
|
goto exit_unlock;
|
|
|
|
/* If power-saving is in use, make sure device is awake */
|
|
if (test_bit(STATUS_POWER_PMI, &priv->status)) {
|
|
reg = iwl4965_read32(priv, CSR_UCODE_DRV_GP1);
|
|
|
|
if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
|
|
iwl4965_set_bit(priv, CSR_GP_CNTRL,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
|
|
goto exit_unlock;
|
|
}
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc)
|
|
goto exit_unlock;
|
|
|
|
/* Device expects a multiple of 8 */
|
|
iwl4965_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
|
|
q->write & ~0x7);
|
|
iwl4965_release_nic_access(priv);
|
|
|
|
/* Else device is assumed to be awake */
|
|
} else
|
|
/* Device expects a multiple of 8 */
|
|
iwl4965_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7);
|
|
|
|
|
|
q->need_update = 0;
|
|
|
|
exit_unlock:
|
|
spin_unlock_irqrestore(&q->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
|
|
*/
|
|
static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl4965_priv *priv,
|
|
dma_addr_t dma_addr)
|
|
{
|
|
return cpu_to_le32((u32)(dma_addr >> 8));
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_rx_queue_restock - refill RX queue from pre-allocated pool
|
|
*
|
|
* If there are slots in the RX queue that need to be restocked,
|
|
* and we have free pre-allocated buffers, fill the ranks as much
|
|
* as we can, pulling from rx_free.
|
|
*
|
|
* This moves the 'write' index forward to catch up with 'processed', and
|
|
* also updates the memory address in the firmware to reference the new
|
|
* target buffer.
|
|
*/
|
|
static int iwl4965_rx_queue_restock(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_rx_queue *rxq = &priv->rxq;
|
|
struct list_head *element;
|
|
struct iwl4965_rx_mem_buffer *rxb;
|
|
unsigned long flags;
|
|
int write, rc;
|
|
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
write = rxq->write & ~0x7;
|
|
while ((iwl4965_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
|
|
/* Get next free Rx buffer, remove from free list */
|
|
element = rxq->rx_free.next;
|
|
rxb = list_entry(element, struct iwl4965_rx_mem_buffer, list);
|
|
list_del(element);
|
|
|
|
/* Point to Rx buffer via next RBD in circular buffer */
|
|
rxq->bd[rxq->write] = iwl4965_dma_addr2rbd_ptr(priv, rxb->dma_addr);
|
|
rxq->queue[rxq->write] = rxb;
|
|
rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
|
|
rxq->free_count--;
|
|
}
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
/* If the pre-allocated buffer pool is dropping low, schedule to
|
|
* refill it */
|
|
if (rxq->free_count <= RX_LOW_WATERMARK)
|
|
queue_work(priv->workqueue, &priv->rx_replenish);
|
|
|
|
|
|
/* If we've added more space for the firmware to place data, tell it.
|
|
* Increment device's write pointer in multiples of 8. */
|
|
if ((write != (rxq->write & ~0x7))
|
|
|| (abs(rxq->write - rxq->read) > 7)) {
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
rxq->need_update = 1;
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
rc = iwl4965_rx_queue_update_write_ptr(priv, rxq);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_rx_replenish - Move all used packet from rx_used to rx_free
|
|
*
|
|
* When moving to rx_free an SKB is allocated for the slot.
|
|
*
|
|
* Also restock the Rx queue via iwl4965_rx_queue_restock.
|
|
* This is called as a scheduled work item (except for during initialization)
|
|
*/
|
|
static void iwl4965_rx_allocate(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_rx_queue *rxq = &priv->rxq;
|
|
struct list_head *element;
|
|
struct iwl4965_rx_mem_buffer *rxb;
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
while (!list_empty(&rxq->rx_used)) {
|
|
element = rxq->rx_used.next;
|
|
rxb = list_entry(element, struct iwl4965_rx_mem_buffer, list);
|
|
|
|
/* Alloc a new receive buffer */
|
|
rxb->skb =
|
|
alloc_skb(priv->hw_setting.rx_buf_size,
|
|
__GFP_NOWARN | GFP_ATOMIC);
|
|
if (!rxb->skb) {
|
|
if (net_ratelimit())
|
|
printk(KERN_CRIT DRV_NAME
|
|
": Can not allocate SKB buffers\n");
|
|
/* We don't reschedule replenish work here -- we will
|
|
* call the restock method and if it still needs
|
|
* more buffers it will schedule replenish */
|
|
break;
|
|
}
|
|
priv->alloc_rxb_skb++;
|
|
list_del(element);
|
|
|
|
/* Get physical address of RB/SKB */
|
|
rxb->dma_addr =
|
|
pci_map_single(priv->pci_dev, rxb->skb->data,
|
|
priv->hw_setting.rx_buf_size, PCI_DMA_FROMDEVICE);
|
|
list_add_tail(&rxb->list, &rxq->rx_free);
|
|
rxq->free_count++;
|
|
}
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* this should be called while priv->lock is locked
|
|
*/
|
|
static void __iwl4965_rx_replenish(void *data)
|
|
{
|
|
struct iwl4965_priv *priv = data;
|
|
|
|
iwl4965_rx_allocate(priv);
|
|
iwl4965_rx_queue_restock(priv);
|
|
}
|
|
|
|
|
|
void iwl4965_rx_replenish(void *data)
|
|
{
|
|
struct iwl4965_priv *priv = data;
|
|
unsigned long flags;
|
|
|
|
iwl4965_rx_allocate(priv);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
iwl4965_rx_queue_restock(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
|
|
* If an SKB has been detached, the POOL needs to have its SKB set to NULL
|
|
* This free routine walks the list of POOL entries and if SKB is set to
|
|
* non NULL it is unmapped and freed
|
|
*/
|
|
static void iwl4965_rx_queue_free(struct iwl4965_priv *priv, struct iwl4965_rx_queue *rxq)
|
|
{
|
|
int i;
|
|
for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
|
|
if (rxq->pool[i].skb != NULL) {
|
|
pci_unmap_single(priv->pci_dev,
|
|
rxq->pool[i].dma_addr,
|
|
priv->hw_setting.rx_buf_size,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(rxq->pool[i].skb);
|
|
}
|
|
}
|
|
|
|
pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
|
|
rxq->dma_addr);
|
|
rxq->bd = NULL;
|
|
}
|
|
|
|
int iwl4965_rx_queue_alloc(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_rx_queue *rxq = &priv->rxq;
|
|
struct pci_dev *dev = priv->pci_dev;
|
|
int i;
|
|
|
|
spin_lock_init(&rxq->lock);
|
|
INIT_LIST_HEAD(&rxq->rx_free);
|
|
INIT_LIST_HEAD(&rxq->rx_used);
|
|
|
|
/* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
|
|
rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr);
|
|
if (!rxq->bd)
|
|
return -ENOMEM;
|
|
|
|
/* Fill the rx_used queue with _all_ of the Rx buffers */
|
|
for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
|
|
list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
|
|
|
|
/* Set us so that we have processed and used all buffers, but have
|
|
* not restocked the Rx queue with fresh buffers */
|
|
rxq->read = rxq->write = 0;
|
|
rxq->free_count = 0;
|
|
rxq->need_update = 0;
|
|
return 0;
|
|
}
|
|
|
|
void iwl4965_rx_queue_reset(struct iwl4965_priv *priv, struct iwl4965_rx_queue *rxq)
|
|
{
|
|
unsigned long flags;
|
|
int i;
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
INIT_LIST_HEAD(&rxq->rx_free);
|
|
INIT_LIST_HEAD(&rxq->rx_used);
|
|
/* Fill the rx_used queue with _all_ of the Rx buffers */
|
|
for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
|
|
/* In the reset function, these buffers may have been allocated
|
|
* to an SKB, so we need to unmap and free potential storage */
|
|
if (rxq->pool[i].skb != NULL) {
|
|
pci_unmap_single(priv->pci_dev,
|
|
rxq->pool[i].dma_addr,
|
|
priv->hw_setting.rx_buf_size,
|
|
PCI_DMA_FROMDEVICE);
|
|
priv->alloc_rxb_skb--;
|
|
dev_kfree_skb(rxq->pool[i].skb);
|
|
rxq->pool[i].skb = NULL;
|
|
}
|
|
list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
|
|
}
|
|
|
|
/* Set us so that we have processed and used all buffers, but have
|
|
* not restocked the Rx queue with fresh buffers */
|
|
rxq->read = rxq->write = 0;
|
|
rxq->free_count = 0;
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
}
|
|
|
|
/* Convert linear signal-to-noise ratio into dB */
|
|
static u8 ratio2dB[100] = {
|
|
/* 0 1 2 3 4 5 6 7 8 9 */
|
|
0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
|
|
20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
|
|
26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
|
|
29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
|
|
32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
|
|
34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
|
|
36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
|
|
37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
|
|
38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
|
|
39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
|
|
};
|
|
|
|
/* Calculates a relative dB value from a ratio of linear
|
|
* (i.e. not dB) signal levels.
|
|
* Conversion assumes that levels are voltages (20*log), not powers (10*log). */
|
|
int iwl4965_calc_db_from_ratio(int sig_ratio)
|
|
{
|
|
/* 1000:1 or higher just report as 60 dB */
|
|
if (sig_ratio >= 1000)
|
|
return 60;
|
|
|
|
/* 100:1 or higher, divide by 10 and use table,
|
|
* add 20 dB to make up for divide by 10 */
|
|
if (sig_ratio >= 100)
|
|
return (20 + (int)ratio2dB[sig_ratio/10]);
|
|
|
|
/* We shouldn't see this */
|
|
if (sig_ratio < 1)
|
|
return 0;
|
|
|
|
/* Use table for ratios 1:1 - 99:1 */
|
|
return (int)ratio2dB[sig_ratio];
|
|
}
|
|
|
|
#define PERFECT_RSSI (-20) /* dBm */
|
|
#define WORST_RSSI (-95) /* dBm */
|
|
#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
|
|
|
|
/* Calculate an indication of rx signal quality (a percentage, not dBm!).
|
|
* See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
|
|
* about formulas used below. */
|
|
int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm)
|
|
{
|
|
int sig_qual;
|
|
int degradation = PERFECT_RSSI - rssi_dbm;
|
|
|
|
/* If we get a noise measurement, use signal-to-noise ratio (SNR)
|
|
* as indicator; formula is (signal dbm - noise dbm).
|
|
* SNR at or above 40 is a great signal (100%).
|
|
* Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
|
|
* Weakest usable signal is usually 10 - 15 dB SNR. */
|
|
if (noise_dbm) {
|
|
if (rssi_dbm - noise_dbm >= 40)
|
|
return 100;
|
|
else if (rssi_dbm < noise_dbm)
|
|
return 0;
|
|
sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
|
|
|
|
/* Else use just the signal level.
|
|
* This formula is a least squares fit of data points collected and
|
|
* compared with a reference system that had a percentage (%) display
|
|
* for signal quality. */
|
|
} else
|
|
sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
|
|
(15 * RSSI_RANGE + 62 * degradation)) /
|
|
(RSSI_RANGE * RSSI_RANGE);
|
|
|
|
if (sig_qual > 100)
|
|
sig_qual = 100;
|
|
else if (sig_qual < 1)
|
|
sig_qual = 0;
|
|
|
|
return sig_qual;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_rx_handle - Main entry function for receiving responses from uCode
|
|
*
|
|
* Uses the priv->rx_handlers callback function array to invoke
|
|
* the appropriate handlers, including command responses,
|
|
* frame-received notifications, and other notifications.
|
|
*/
|
|
static void iwl4965_rx_handle(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_rx_mem_buffer *rxb;
|
|
struct iwl4965_rx_packet *pkt;
|
|
struct iwl4965_rx_queue *rxq = &priv->rxq;
|
|
u32 r, i;
|
|
int reclaim;
|
|
unsigned long flags;
|
|
u8 fill_rx = 0;
|
|
u32 count = 0;
|
|
|
|
/* uCode's read index (stored in shared DRAM) indicates the last Rx
|
|
* buffer that the driver may process (last buffer filled by ucode). */
|
|
r = iwl4965_hw_get_rx_read(priv);
|
|
i = rxq->read;
|
|
|
|
/* Rx interrupt, but nothing sent from uCode */
|
|
if (i == r)
|
|
IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
|
|
|
|
if (iwl4965_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
|
|
fill_rx = 1;
|
|
|
|
while (i != r) {
|
|
rxb = rxq->queue[i];
|
|
|
|
/* If an RXB doesn't have a Rx queue slot associated with it,
|
|
* then a bug has been introduced in the queue refilling
|
|
* routines -- catch it here */
|
|
BUG_ON(rxb == NULL);
|
|
|
|
rxq->queue[i] = NULL;
|
|
|
|
pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
|
|
priv->hw_setting.rx_buf_size,
|
|
PCI_DMA_FROMDEVICE);
|
|
pkt = (struct iwl4965_rx_packet *)rxb->skb->data;
|
|
|
|
/* Reclaim a command buffer only if this packet is a response
|
|
* to a (driver-originated) command.
|
|
* If the packet (e.g. Rx frame) originated from uCode,
|
|
* there is no command buffer to reclaim.
|
|
* Ucode should set SEQ_RX_FRAME bit if ucode-originated,
|
|
* but apparently a few don't get set; catch them here. */
|
|
reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
|
|
(pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
|
|
(pkt->hdr.cmd != REPLY_4965_RX) &&
|
|
(pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
|
|
(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
|
|
(pkt->hdr.cmd != REPLY_TX);
|
|
|
|
/* Based on type of command response or notification,
|
|
* handle those that need handling via function in
|
|
* rx_handlers table. See iwl4965_setup_rx_handlers() */
|
|
if (priv->rx_handlers[pkt->hdr.cmd]) {
|
|
IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR,
|
|
"r = %d, i = %d, %s, 0x%02x\n", r, i,
|
|
get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
|
|
priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
|
|
} else {
|
|
/* No handling needed */
|
|
IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR,
|
|
"r %d i %d No handler needed for %s, 0x%02x\n",
|
|
r, i, get_cmd_string(pkt->hdr.cmd),
|
|
pkt->hdr.cmd);
|
|
}
|
|
|
|
if (reclaim) {
|
|
/* Invoke any callbacks, transfer the skb to caller, and
|
|
* fire off the (possibly) blocking iwl4965_send_cmd()
|
|
* as we reclaim the driver command queue */
|
|
if (rxb && rxb->skb)
|
|
iwl4965_tx_cmd_complete(priv, rxb);
|
|
else
|
|
IWL_WARNING("Claim null rxb?\n");
|
|
}
|
|
|
|
/* For now we just don't re-use anything. We can tweak this
|
|
* later to try and re-use notification packets and SKBs that
|
|
* fail to Rx correctly */
|
|
if (rxb->skb != NULL) {
|
|
priv->alloc_rxb_skb--;
|
|
dev_kfree_skb_any(rxb->skb);
|
|
rxb->skb = NULL;
|
|
}
|
|
|
|
pci_unmap_single(priv->pci_dev, rxb->dma_addr,
|
|
priv->hw_setting.rx_buf_size,
|
|
PCI_DMA_FROMDEVICE);
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
list_add_tail(&rxb->list, &priv->rxq.rx_used);
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
i = (i + 1) & RX_QUEUE_MASK;
|
|
/* If there are a lot of unused frames,
|
|
* restock the Rx queue so ucode wont assert. */
|
|
if (fill_rx) {
|
|
count++;
|
|
if (count >= 8) {
|
|
priv->rxq.read = i;
|
|
__iwl4965_rx_replenish(priv);
|
|
count = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Backtrack one entry */
|
|
priv->rxq.read = i;
|
|
iwl4965_rx_queue_restock(priv);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_queue_update_write_ptr - Send new write index to hardware
|
|
*/
|
|
static int iwl4965_tx_queue_update_write_ptr(struct iwl4965_priv *priv,
|
|
struct iwl4965_tx_queue *txq)
|
|
{
|
|
u32 reg = 0;
|
|
int rc = 0;
|
|
int txq_id = txq->q.id;
|
|
|
|
if (txq->need_update == 0)
|
|
return rc;
|
|
|
|
/* if we're trying to save power */
|
|
if (test_bit(STATUS_POWER_PMI, &priv->status)) {
|
|
/* wake up nic if it's powered down ...
|
|
* uCode will wake up, and interrupt us again, so next
|
|
* time we'll skip this part. */
|
|
reg = iwl4965_read32(priv, CSR_UCODE_DRV_GP1);
|
|
|
|
if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
|
|
IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg);
|
|
iwl4965_set_bit(priv, CSR_GP_CNTRL,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
|
|
return rc;
|
|
}
|
|
|
|
/* restore this queue's parameters in nic hardware. */
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc)
|
|
return rc;
|
|
iwl4965_write_direct32(priv, HBUS_TARG_WRPTR,
|
|
txq->q.write_ptr | (txq_id << 8));
|
|
iwl4965_release_nic_access(priv);
|
|
|
|
/* else not in power-save mode, uCode will never sleep when we're
|
|
* trying to tx (during RFKILL, we're not trying to tx). */
|
|
} else
|
|
iwl4965_write32(priv, HBUS_TARG_WRPTR,
|
|
txq->q.write_ptr | (txq_id << 8));
|
|
|
|
txq->need_update = 0;
|
|
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
static void iwl4965_print_rx_config_cmd(struct iwl4965_rxon_cmd *rxon)
|
|
{
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
IWL_DEBUG_RADIO("RX CONFIG:\n");
|
|
iwl4965_print_hex_dump(IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
|
|
IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
|
|
IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
|
|
IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
|
|
le32_to_cpu(rxon->filter_flags));
|
|
IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
|
|
IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
|
|
rxon->ofdm_basic_rates);
|
|
IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
|
|
IWL_DEBUG_RADIO("u8[6] node_addr: %s\n",
|
|
print_mac(mac, rxon->node_addr));
|
|
IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n",
|
|
print_mac(mac, rxon->bssid_addr));
|
|
IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
|
|
}
|
|
#endif
|
|
|
|
static void iwl4965_enable_interrupts(struct iwl4965_priv *priv)
|
|
{
|
|
IWL_DEBUG_ISR("Enabling interrupts\n");
|
|
set_bit(STATUS_INT_ENABLED, &priv->status);
|
|
iwl4965_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
|
|
}
|
|
|
|
static inline void iwl4965_disable_interrupts(struct iwl4965_priv *priv)
|
|
{
|
|
clear_bit(STATUS_INT_ENABLED, &priv->status);
|
|
|
|
/* disable interrupts from uCode/NIC to host */
|
|
iwl4965_write32(priv, CSR_INT_MASK, 0x00000000);
|
|
|
|
/* acknowledge/clear/reset any interrupts still pending
|
|
* from uCode or flow handler (Rx/Tx DMA) */
|
|
iwl4965_write32(priv, CSR_INT, 0xffffffff);
|
|
iwl4965_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
|
|
IWL_DEBUG_ISR("Disabled interrupts\n");
|
|
}
|
|
|
|
static const char *desc_lookup(int i)
|
|
{
|
|
switch (i) {
|
|
case 1:
|
|
return "FAIL";
|
|
case 2:
|
|
return "BAD_PARAM";
|
|
case 3:
|
|
return "BAD_CHECKSUM";
|
|
case 4:
|
|
return "NMI_INTERRUPT";
|
|
case 5:
|
|
return "SYSASSERT";
|
|
case 6:
|
|
return "FATAL_ERROR";
|
|
}
|
|
|
|
return "UNKNOWN";
|
|
}
|
|
|
|
#define ERROR_START_OFFSET (1 * sizeof(u32))
|
|
#define ERROR_ELEM_SIZE (7 * sizeof(u32))
|
|
|
|
static void iwl4965_dump_nic_error_log(struct iwl4965_priv *priv)
|
|
{
|
|
u32 data2, line;
|
|
u32 desc, time, count, base, data1;
|
|
u32 blink1, blink2, ilink1, ilink2;
|
|
int rc;
|
|
|
|
base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
|
|
|
|
if (!iwl4965_hw_valid_rtc_data_addr(base)) {
|
|
IWL_ERROR("Not valid error log pointer 0x%08X\n", base);
|
|
return;
|
|
}
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
IWL_WARNING("Can not read from adapter at this time.\n");
|
|
return;
|
|
}
|
|
|
|
count = iwl4965_read_targ_mem(priv, base);
|
|
|
|
if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
|
|
IWL_ERROR("Start IWL Error Log Dump:\n");
|
|
IWL_ERROR("Status: 0x%08lX, Config: %08X count: %d\n",
|
|
priv->status, priv->config, count);
|
|
}
|
|
|
|
desc = iwl4965_read_targ_mem(priv, base + 1 * sizeof(u32));
|
|
blink1 = iwl4965_read_targ_mem(priv, base + 3 * sizeof(u32));
|
|
blink2 = iwl4965_read_targ_mem(priv, base + 4 * sizeof(u32));
|
|
ilink1 = iwl4965_read_targ_mem(priv, base + 5 * sizeof(u32));
|
|
ilink2 = iwl4965_read_targ_mem(priv, base + 6 * sizeof(u32));
|
|
data1 = iwl4965_read_targ_mem(priv, base + 7 * sizeof(u32));
|
|
data2 = iwl4965_read_targ_mem(priv, base + 8 * sizeof(u32));
|
|
line = iwl4965_read_targ_mem(priv, base + 9 * sizeof(u32));
|
|
time = iwl4965_read_targ_mem(priv, base + 11 * sizeof(u32));
|
|
|
|
IWL_ERROR("Desc Time "
|
|
"data1 data2 line\n");
|
|
IWL_ERROR("%-13s (#%d) %010u 0x%08X 0x%08X %u\n",
|
|
desc_lookup(desc), desc, time, data1, data2, line);
|
|
IWL_ERROR("blink1 blink2 ilink1 ilink2\n");
|
|
IWL_ERROR("0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
|
|
ilink1, ilink2);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
}
|
|
|
|
#define EVENT_START_OFFSET (4 * sizeof(u32))
|
|
|
|
/**
|
|
* iwl4965_print_event_log - Dump error event log to syslog
|
|
*
|
|
* NOTE: Must be called with iwl4965_grab_nic_access() already obtained!
|
|
*/
|
|
static void iwl4965_print_event_log(struct iwl4965_priv *priv, u32 start_idx,
|
|
u32 num_events, u32 mode)
|
|
{
|
|
u32 i;
|
|
u32 base; /* SRAM byte address of event log header */
|
|
u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
|
|
u32 ptr; /* SRAM byte address of log data */
|
|
u32 ev, time, data; /* event log data */
|
|
|
|
if (num_events == 0)
|
|
return;
|
|
|
|
base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
|
|
|
|
if (mode == 0)
|
|
event_size = 2 * sizeof(u32);
|
|
else
|
|
event_size = 3 * sizeof(u32);
|
|
|
|
ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
|
|
|
|
/* "time" is actually "data" for mode 0 (no timestamp).
|
|
* place event id # at far right for easier visual parsing. */
|
|
for (i = 0; i < num_events; i++) {
|
|
ev = iwl4965_read_targ_mem(priv, ptr);
|
|
ptr += sizeof(u32);
|
|
time = iwl4965_read_targ_mem(priv, ptr);
|
|
ptr += sizeof(u32);
|
|
if (mode == 0)
|
|
IWL_ERROR("0x%08x\t%04u\n", time, ev); /* data, ev */
|
|
else {
|
|
data = iwl4965_read_targ_mem(priv, ptr);
|
|
ptr += sizeof(u32);
|
|
IWL_ERROR("%010u\t0x%08x\t%04u\n", time, data, ev);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void iwl4965_dump_nic_event_log(struct iwl4965_priv *priv)
|
|
{
|
|
int rc;
|
|
u32 base; /* SRAM byte address of event log header */
|
|
u32 capacity; /* event log capacity in # entries */
|
|
u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
|
|
u32 num_wraps; /* # times uCode wrapped to top of log */
|
|
u32 next_entry; /* index of next entry to be written by uCode */
|
|
u32 size; /* # entries that we'll print */
|
|
|
|
base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
|
|
if (!iwl4965_hw_valid_rtc_data_addr(base)) {
|
|
IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
|
|
return;
|
|
}
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
IWL_WARNING("Can not read from adapter at this time.\n");
|
|
return;
|
|
}
|
|
|
|
/* event log header */
|
|
capacity = iwl4965_read_targ_mem(priv, base);
|
|
mode = iwl4965_read_targ_mem(priv, base + (1 * sizeof(u32)));
|
|
num_wraps = iwl4965_read_targ_mem(priv, base + (2 * sizeof(u32)));
|
|
next_entry = iwl4965_read_targ_mem(priv, base + (3 * sizeof(u32)));
|
|
|
|
size = num_wraps ? capacity : next_entry;
|
|
|
|
/* bail out if nothing in log */
|
|
if (size == 0) {
|
|
IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
|
|
iwl4965_release_nic_access(priv);
|
|
return;
|
|
}
|
|
|
|
IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
|
|
size, num_wraps);
|
|
|
|
/* if uCode has wrapped back to top of log, start at the oldest entry,
|
|
* i.e the next one that uCode would fill. */
|
|
if (num_wraps)
|
|
iwl4965_print_event_log(priv, next_entry,
|
|
capacity - next_entry, mode);
|
|
|
|
/* (then/else) start at top of log */
|
|
iwl4965_print_event_log(priv, 0, next_entry, mode);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_irq_handle_error - called for HW or SW error interrupt from card
|
|
*/
|
|
static void iwl4965_irq_handle_error(struct iwl4965_priv *priv)
|
|
{
|
|
/* Set the FW error flag -- cleared on iwl4965_down */
|
|
set_bit(STATUS_FW_ERROR, &priv->status);
|
|
|
|
/* Cancel currently queued command. */
|
|
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
if (iwl4965_debug_level & IWL_DL_FW_ERRORS) {
|
|
iwl4965_dump_nic_error_log(priv);
|
|
iwl4965_dump_nic_event_log(priv);
|
|
iwl4965_print_rx_config_cmd(&priv->staging_rxon);
|
|
}
|
|
#endif
|
|
|
|
wake_up_interruptible(&priv->wait_command_queue);
|
|
|
|
/* Keep the restart process from trying to send host
|
|
* commands by clearing the INIT status bit */
|
|
clear_bit(STATUS_READY, &priv->status);
|
|
|
|
if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
|
|
IWL_DEBUG(IWL_DL_INFO | IWL_DL_FW_ERRORS,
|
|
"Restarting adapter due to uCode error.\n");
|
|
|
|
if (iwl4965_is_associated(priv)) {
|
|
memcpy(&priv->recovery_rxon, &priv->active_rxon,
|
|
sizeof(priv->recovery_rxon));
|
|
priv->error_recovering = 1;
|
|
}
|
|
queue_work(priv->workqueue, &priv->restart);
|
|
}
|
|
}
|
|
|
|
static void iwl4965_error_recovery(struct iwl4965_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
|
|
memcpy(&priv->staging_rxon, &priv->recovery_rxon,
|
|
sizeof(priv->staging_rxon));
|
|
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
iwl4965_commit_rxon(priv);
|
|
|
|
iwl4965_rxon_add_station(priv, priv->bssid, 1);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
|
|
priv->error_recovering = 0;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static void iwl4965_irq_tasklet(struct iwl4965_priv *priv)
|
|
{
|
|
u32 inta, handled = 0;
|
|
u32 inta_fh;
|
|
unsigned long flags;
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
u32 inta_mask;
|
|
#endif
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/* Ack/clear/reset pending uCode interrupts.
|
|
* Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
|
|
* and will clear only when CSR_FH_INT_STATUS gets cleared. */
|
|
inta = iwl4965_read32(priv, CSR_INT);
|
|
iwl4965_write32(priv, CSR_INT, inta);
|
|
|
|
/* Ack/clear/reset pending flow-handler (DMA) interrupts.
|
|
* Any new interrupts that happen after this, either while we're
|
|
* in this tasklet, or later, will show up in next ISR/tasklet. */
|
|
inta_fh = iwl4965_read32(priv, CSR_FH_INT_STATUS);
|
|
iwl4965_write32(priv, CSR_FH_INT_STATUS, inta_fh);
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
if (iwl4965_debug_level & IWL_DL_ISR) {
|
|
/* just for debug */
|
|
inta_mask = iwl4965_read32(priv, CSR_INT_MASK);
|
|
IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
|
|
inta, inta_mask, inta_fh);
|
|
}
|
|
#endif
|
|
|
|
/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
|
|
* atomic, make sure that inta covers all the interrupts that
|
|
* we've discovered, even if FH interrupt came in just after
|
|
* reading CSR_INT. */
|
|
if (inta_fh & CSR_FH_INT_RX_MASK)
|
|
inta |= CSR_INT_BIT_FH_RX;
|
|
if (inta_fh & CSR_FH_INT_TX_MASK)
|
|
inta |= CSR_INT_BIT_FH_TX;
|
|
|
|
/* Now service all interrupt bits discovered above. */
|
|
if (inta & CSR_INT_BIT_HW_ERR) {
|
|
IWL_ERROR("Microcode HW error detected. Restarting.\n");
|
|
|
|
/* Tell the device to stop sending interrupts */
|
|
iwl4965_disable_interrupts(priv);
|
|
|
|
iwl4965_irq_handle_error(priv);
|
|
|
|
handled |= CSR_INT_BIT_HW_ERR;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
if (iwl4965_debug_level & (IWL_DL_ISR)) {
|
|
/* NIC fires this, but we don't use it, redundant with WAKEUP */
|
|
if (inta & CSR_INT_BIT_SCD)
|
|
IWL_DEBUG_ISR("Scheduler finished to transmit "
|
|
"the frame/frames.\n");
|
|
|
|
/* Alive notification via Rx interrupt will do the real work */
|
|
if (inta & CSR_INT_BIT_ALIVE)
|
|
IWL_DEBUG_ISR("Alive interrupt\n");
|
|
}
|
|
#endif
|
|
/* Safely ignore these bits for debug checks below */
|
|
inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
|
|
|
|
/* HW RF KILL switch toggled */
|
|
if (inta & CSR_INT_BIT_RF_KILL) {
|
|
int hw_rf_kill = 0;
|
|
if (!(iwl4965_read32(priv, CSR_GP_CNTRL) &
|
|
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
|
|
hw_rf_kill = 1;
|
|
|
|
IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR,
|
|
"RF_KILL bit toggled to %s.\n",
|
|
hw_rf_kill ? "disable radio":"enable radio");
|
|
|
|
/* Queue restart only if RF_KILL switch was set to "kill"
|
|
* when we loaded driver, and is now set to "enable".
|
|
* After we're Alive, RF_KILL gets handled by
|
|
* iwl_rx_card_state_notif() */
|
|
if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
|
|
clear_bit(STATUS_RF_KILL_HW, &priv->status);
|
|
queue_work(priv->workqueue, &priv->restart);
|
|
}
|
|
|
|
handled |= CSR_INT_BIT_RF_KILL;
|
|
}
|
|
|
|
/* Chip got too hot and stopped itself */
|
|
if (inta & CSR_INT_BIT_CT_KILL) {
|
|
IWL_ERROR("Microcode CT kill error detected.\n");
|
|
handled |= CSR_INT_BIT_CT_KILL;
|
|
}
|
|
|
|
/* Error detected by uCode */
|
|
if (inta & CSR_INT_BIT_SW_ERR) {
|
|
IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n",
|
|
inta);
|
|
iwl4965_irq_handle_error(priv);
|
|
handled |= CSR_INT_BIT_SW_ERR;
|
|
}
|
|
|
|
/* uCode wakes up after power-down sleep */
|
|
if (inta & CSR_INT_BIT_WAKEUP) {
|
|
IWL_DEBUG_ISR("Wakeup interrupt\n");
|
|
iwl4965_rx_queue_update_write_ptr(priv, &priv->rxq);
|
|
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[0]);
|
|
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[1]);
|
|
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[2]);
|
|
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[3]);
|
|
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[4]);
|
|
iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[5]);
|
|
|
|
handled |= CSR_INT_BIT_WAKEUP;
|
|
}
|
|
|
|
/* All uCode command responses, including Tx command responses,
|
|
* Rx "responses" (frame-received notification), and other
|
|
* notifications from uCode come through here*/
|
|
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
|
|
iwl4965_rx_handle(priv);
|
|
handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
|
|
}
|
|
|
|
if (inta & CSR_INT_BIT_FH_TX) {
|
|
IWL_DEBUG_ISR("Tx interrupt\n");
|
|
handled |= CSR_INT_BIT_FH_TX;
|
|
}
|
|
|
|
if (inta & ~handled)
|
|
IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
|
|
|
|
if (inta & ~CSR_INI_SET_MASK) {
|
|
IWL_WARNING("Disabled INTA bits 0x%08x were pending\n",
|
|
inta & ~CSR_INI_SET_MASK);
|
|
IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh);
|
|
}
|
|
|
|
/* Re-enable all interrupts */
|
|
iwl4965_enable_interrupts(priv);
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
if (iwl4965_debug_level & (IWL_DL_ISR)) {
|
|
inta = iwl4965_read32(priv, CSR_INT);
|
|
inta_mask = iwl4965_read32(priv, CSR_INT_MASK);
|
|
inta_fh = iwl4965_read32(priv, CSR_FH_INT_STATUS);
|
|
IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
|
|
"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
|
|
}
|
|
#endif
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static irqreturn_t iwl4965_isr(int irq, void *data)
|
|
{
|
|
struct iwl4965_priv *priv = data;
|
|
u32 inta, inta_mask;
|
|
u32 inta_fh;
|
|
if (!priv)
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
/* Disable (but don't clear!) interrupts here to avoid
|
|
* back-to-back ISRs and sporadic interrupts from our NIC.
|
|
* If we have something to service, the tasklet will re-enable ints.
|
|
* If we *don't* have something, we'll re-enable before leaving here. */
|
|
inta_mask = iwl4965_read32(priv, CSR_INT_MASK); /* just for debug */
|
|
iwl4965_write32(priv, CSR_INT_MASK, 0x00000000);
|
|
|
|
/* Discover which interrupts are active/pending */
|
|
inta = iwl4965_read32(priv, CSR_INT);
|
|
inta_fh = iwl4965_read32(priv, CSR_FH_INT_STATUS);
|
|
|
|
/* Ignore interrupt if there's nothing in NIC to service.
|
|
* This may be due to IRQ shared with another device,
|
|
* or due to sporadic interrupts thrown from our NIC. */
|
|
if (!inta && !inta_fh) {
|
|
IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
|
|
goto none;
|
|
}
|
|
|
|
if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
|
|
/* Hardware disappeared. It might have already raised
|
|
* an interrupt */
|
|
IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
|
|
goto unplugged;
|
|
}
|
|
|
|
IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
|
|
inta, inta_mask, inta_fh);
|
|
|
|
inta &= ~CSR_INT_BIT_SCD;
|
|
|
|
/* iwl4965_irq_tasklet() will service interrupts and re-enable them */
|
|
if (likely(inta || inta_fh))
|
|
tasklet_schedule(&priv->irq_tasklet);
|
|
|
|
unplugged:
|
|
spin_unlock(&priv->lock);
|
|
return IRQ_HANDLED;
|
|
|
|
none:
|
|
/* re-enable interrupts here since we don't have anything to service. */
|
|
iwl4965_enable_interrupts(priv);
|
|
spin_unlock(&priv->lock);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/************************** EEPROM BANDS ****************************
|
|
*
|
|
* The iwl4965_eeprom_band definitions below provide the mapping from the
|
|
* EEPROM contents to the specific channel number supported for each
|
|
* band.
|
|
*
|
|
* For example, iwl4965_priv->eeprom.band_3_channels[4] from the band_3
|
|
* definition below maps to physical channel 42 in the 5.2GHz spectrum.
|
|
* The specific geography and calibration information for that channel
|
|
* is contained in the eeprom map itself.
|
|
*
|
|
* During init, we copy the eeprom information and channel map
|
|
* information into priv->channel_info_24/52 and priv->channel_map_24/52
|
|
*
|
|
* channel_map_24/52 provides the index in the channel_info array for a
|
|
* given channel. We have to have two separate maps as there is channel
|
|
* overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
|
|
* band_2
|
|
*
|
|
* A value of 0xff stored in the channel_map indicates that the channel
|
|
* is not supported by the hardware at all.
|
|
*
|
|
* A value of 0xfe in the channel_map indicates that the channel is not
|
|
* valid for Tx with the current hardware. This means that
|
|
* while the system can tune and receive on a given channel, it may not
|
|
* be able to associate or transmit any frames on that
|
|
* channel. There is no corresponding channel information for that
|
|
* entry.
|
|
*
|
|
*********************************************************************/
|
|
|
|
/* 2.4 GHz */
|
|
static const u8 iwl4965_eeprom_band_1[14] = {
|
|
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
|
|
};
|
|
|
|
/* 5.2 GHz bands */
|
|
static const u8 iwl4965_eeprom_band_2[] = { /* 4915-5080MHz */
|
|
183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
|
|
};
|
|
|
|
static const u8 iwl4965_eeprom_band_3[] = { /* 5170-5320MHz */
|
|
34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
|
|
};
|
|
|
|
static const u8 iwl4965_eeprom_band_4[] = { /* 5500-5700MHz */
|
|
100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
|
|
};
|
|
|
|
static const u8 iwl4965_eeprom_band_5[] = { /* 5725-5825MHz */
|
|
145, 149, 153, 157, 161, 165
|
|
};
|
|
|
|
static u8 iwl4965_eeprom_band_6[] = { /* 2.4 FAT channel */
|
|
1, 2, 3, 4, 5, 6, 7
|
|
};
|
|
|
|
static u8 iwl4965_eeprom_band_7[] = { /* 5.2 FAT channel */
|
|
36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
|
|
};
|
|
|
|
static void iwl4965_init_band_reference(const struct iwl4965_priv *priv,
|
|
int band,
|
|
int *eeprom_ch_count,
|
|
const struct iwl4965_eeprom_channel
|
|
**eeprom_ch_info,
|
|
const u8 **eeprom_ch_index)
|
|
{
|
|
switch (band) {
|
|
case 1: /* 2.4GHz band */
|
|
*eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_1);
|
|
*eeprom_ch_info = priv->eeprom.band_1_channels;
|
|
*eeprom_ch_index = iwl4965_eeprom_band_1;
|
|
break;
|
|
case 2: /* 4.9GHz band */
|
|
*eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_2);
|
|
*eeprom_ch_info = priv->eeprom.band_2_channels;
|
|
*eeprom_ch_index = iwl4965_eeprom_band_2;
|
|
break;
|
|
case 3: /* 5.2GHz band */
|
|
*eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_3);
|
|
*eeprom_ch_info = priv->eeprom.band_3_channels;
|
|
*eeprom_ch_index = iwl4965_eeprom_band_3;
|
|
break;
|
|
case 4: /* 5.5GHz band */
|
|
*eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_4);
|
|
*eeprom_ch_info = priv->eeprom.band_4_channels;
|
|
*eeprom_ch_index = iwl4965_eeprom_band_4;
|
|
break;
|
|
case 5: /* 5.7GHz band */
|
|
*eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_5);
|
|
*eeprom_ch_info = priv->eeprom.band_5_channels;
|
|
*eeprom_ch_index = iwl4965_eeprom_band_5;
|
|
break;
|
|
case 6: /* 2.4GHz FAT channels */
|
|
*eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_6);
|
|
*eeprom_ch_info = priv->eeprom.band_24_channels;
|
|
*eeprom_ch_index = iwl4965_eeprom_band_6;
|
|
break;
|
|
case 7: /* 5 GHz FAT channels */
|
|
*eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_7);
|
|
*eeprom_ch_info = priv->eeprom.band_52_channels;
|
|
*eeprom_ch_index = iwl4965_eeprom_band_7;
|
|
break;
|
|
default:
|
|
BUG();
|
|
return;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* iwl4965_get_channel_info - Find driver's private channel info
|
|
*
|
|
* Based on band and channel number.
|
|
*/
|
|
const struct iwl4965_channel_info *iwl4965_get_channel_info(const struct iwl4965_priv *priv,
|
|
int phymode, u16 channel)
|
|
{
|
|
int i;
|
|
|
|
switch (phymode) {
|
|
case MODE_IEEE80211A:
|
|
for (i = 14; i < priv->channel_count; i++) {
|
|
if (priv->channel_info[i].channel == channel)
|
|
return &priv->channel_info[i];
|
|
}
|
|
break;
|
|
|
|
case MODE_IEEE80211B:
|
|
case MODE_IEEE80211G:
|
|
if (channel >= 1 && channel <= 14)
|
|
return &priv->channel_info[channel - 1];
|
|
break;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
#define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
|
|
? # x " " : "")
|
|
|
|
/**
|
|
* iwl4965_init_channel_map - Set up driver's info for all possible channels
|
|
*/
|
|
static int iwl4965_init_channel_map(struct iwl4965_priv *priv)
|
|
{
|
|
int eeprom_ch_count = 0;
|
|
const u8 *eeprom_ch_index = NULL;
|
|
const struct iwl4965_eeprom_channel *eeprom_ch_info = NULL;
|
|
int band, ch;
|
|
struct iwl4965_channel_info *ch_info;
|
|
|
|
if (priv->channel_count) {
|
|
IWL_DEBUG_INFO("Channel map already initialized.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (priv->eeprom.version < 0x2f) {
|
|
IWL_WARNING("Unsupported EEPROM version: 0x%04X\n",
|
|
priv->eeprom.version);
|
|
return -EINVAL;
|
|
}
|
|
|
|
IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
|
|
|
|
priv->channel_count =
|
|
ARRAY_SIZE(iwl4965_eeprom_band_1) +
|
|
ARRAY_SIZE(iwl4965_eeprom_band_2) +
|
|
ARRAY_SIZE(iwl4965_eeprom_band_3) +
|
|
ARRAY_SIZE(iwl4965_eeprom_band_4) +
|
|
ARRAY_SIZE(iwl4965_eeprom_band_5);
|
|
|
|
IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count);
|
|
|
|
priv->channel_info = kzalloc(sizeof(struct iwl4965_channel_info) *
|
|
priv->channel_count, GFP_KERNEL);
|
|
if (!priv->channel_info) {
|
|
IWL_ERROR("Could not allocate channel_info\n");
|
|
priv->channel_count = 0;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ch_info = priv->channel_info;
|
|
|
|
/* Loop through the 5 EEPROM bands adding them in order to the
|
|
* channel map we maintain (that contains additional information than
|
|
* what just in the EEPROM) */
|
|
for (band = 1; band <= 5; band++) {
|
|
|
|
iwl4965_init_band_reference(priv, band, &eeprom_ch_count,
|
|
&eeprom_ch_info, &eeprom_ch_index);
|
|
|
|
/* Loop through each band adding each of the channels */
|
|
for (ch = 0; ch < eeprom_ch_count; ch++) {
|
|
ch_info->channel = eeprom_ch_index[ch];
|
|
ch_info->phymode = (band == 1) ? MODE_IEEE80211B :
|
|
MODE_IEEE80211A;
|
|
|
|
/* permanently store EEPROM's channel regulatory flags
|
|
* and max power in channel info database. */
|
|
ch_info->eeprom = eeprom_ch_info[ch];
|
|
|
|
/* Copy the run-time flags so they are there even on
|
|
* invalid channels */
|
|
ch_info->flags = eeprom_ch_info[ch].flags;
|
|
|
|
if (!(is_channel_valid(ch_info))) {
|
|
IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
|
|
"No traffic\n",
|
|
ch_info->channel,
|
|
ch_info->flags,
|
|
is_channel_a_band(ch_info) ?
|
|
"5.2" : "2.4");
|
|
ch_info++;
|
|
continue;
|
|
}
|
|
|
|
/* Initialize regulatory-based run-time data */
|
|
ch_info->max_power_avg = ch_info->curr_txpow =
|
|
eeprom_ch_info[ch].max_power_avg;
|
|
ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
|
|
ch_info->min_power = 0;
|
|
|
|
IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x"
|
|
" %ddBm): Ad-Hoc %ssupported\n",
|
|
ch_info->channel,
|
|
is_channel_a_band(ch_info) ?
|
|
"5.2" : "2.4",
|
|
CHECK_AND_PRINT(IBSS),
|
|
CHECK_AND_PRINT(ACTIVE),
|
|
CHECK_AND_PRINT(RADAR),
|
|
CHECK_AND_PRINT(WIDE),
|
|
CHECK_AND_PRINT(NARROW),
|
|
CHECK_AND_PRINT(DFS),
|
|
eeprom_ch_info[ch].flags,
|
|
eeprom_ch_info[ch].max_power_avg,
|
|
((eeprom_ch_info[ch].
|
|
flags & EEPROM_CHANNEL_IBSS)
|
|
&& !(eeprom_ch_info[ch].
|
|
flags & EEPROM_CHANNEL_RADAR))
|
|
? "" : "not ");
|
|
|
|
/* Set the user_txpower_limit to the highest power
|
|
* supported by any channel */
|
|
if (eeprom_ch_info[ch].max_power_avg >
|
|
priv->user_txpower_limit)
|
|
priv->user_txpower_limit =
|
|
eeprom_ch_info[ch].max_power_avg;
|
|
|
|
ch_info++;
|
|
}
|
|
}
|
|
|
|
/* Two additional EEPROM bands for 2.4 and 5 GHz FAT channels */
|
|
for (band = 6; band <= 7; band++) {
|
|
int phymode;
|
|
u8 fat_extension_chan;
|
|
|
|
iwl4965_init_band_reference(priv, band, &eeprom_ch_count,
|
|
&eeprom_ch_info, &eeprom_ch_index);
|
|
|
|
/* EEPROM band 6 is 2.4, band 7 is 5 GHz */
|
|
phymode = (band == 6) ? MODE_IEEE80211B : MODE_IEEE80211A;
|
|
|
|
/* Loop through each band adding each of the channels */
|
|
for (ch = 0; ch < eeprom_ch_count; ch++) {
|
|
|
|
if ((band == 6) &&
|
|
((eeprom_ch_index[ch] == 5) ||
|
|
(eeprom_ch_index[ch] == 6) ||
|
|
(eeprom_ch_index[ch] == 7)))
|
|
fat_extension_chan = HT_IE_EXT_CHANNEL_MAX;
|
|
else
|
|
fat_extension_chan = HT_IE_EXT_CHANNEL_ABOVE;
|
|
|
|
/* Set up driver's info for lower half */
|
|
iwl4965_set_fat_chan_info(priv, phymode,
|
|
eeprom_ch_index[ch],
|
|
&(eeprom_ch_info[ch]),
|
|
fat_extension_chan);
|
|
|
|
/* Set up driver's info for upper half */
|
|
iwl4965_set_fat_chan_info(priv, phymode,
|
|
(eeprom_ch_index[ch] + 4),
|
|
&(eeprom_ch_info[ch]),
|
|
HT_IE_EXT_CHANNEL_BELOW);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* iwl4965_free_channel_map - undo allocations in iwl4965_init_channel_map
|
|
*/
|
|
static void iwl4965_free_channel_map(struct iwl4965_priv *priv)
|
|
{
|
|
kfree(priv->channel_info);
|
|
priv->channel_count = 0;
|
|
}
|
|
|
|
/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
|
|
* sending probe req. This should be set long enough to hear probe responses
|
|
* from more than one AP. */
|
|
#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
|
|
#define IWL_ACTIVE_DWELL_TIME_52 (10)
|
|
|
|
/* For faster active scanning, scan will move to the next channel if fewer than
|
|
* PLCP_QUIET_THRESH packets are heard on this channel within
|
|
* ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
|
|
* time if it's a quiet channel (nothing responded to our probe, and there's
|
|
* no other traffic).
|
|
* Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
|
|
#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
|
|
#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
|
|
|
|
/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
|
|
* Must be set longer than active dwell time.
|
|
* For the most reliable scan, set > AP beacon interval (typically 100msec). */
|
|
#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
|
|
#define IWL_PASSIVE_DWELL_TIME_52 (10)
|
|
#define IWL_PASSIVE_DWELL_BASE (100)
|
|
#define IWL_CHANNEL_TUNE_TIME 5
|
|
|
|
static inline u16 iwl4965_get_active_dwell_time(struct iwl4965_priv *priv, int phymode)
|
|
{
|
|
if (phymode == MODE_IEEE80211A)
|
|
return IWL_ACTIVE_DWELL_TIME_52;
|
|
else
|
|
return IWL_ACTIVE_DWELL_TIME_24;
|
|
}
|
|
|
|
static u16 iwl4965_get_passive_dwell_time(struct iwl4965_priv *priv, int phymode)
|
|
{
|
|
u16 active = iwl4965_get_active_dwell_time(priv, phymode);
|
|
u16 passive = (phymode != MODE_IEEE80211A) ?
|
|
IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
|
|
IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
|
|
|
|
if (iwl4965_is_associated(priv)) {
|
|
/* If we're associated, we clamp the maximum passive
|
|
* dwell time to be 98% of the beacon interval (minus
|
|
* 2 * channel tune time) */
|
|
passive = priv->beacon_int;
|
|
if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
|
|
passive = IWL_PASSIVE_DWELL_BASE;
|
|
passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
|
|
}
|
|
|
|
if (passive <= active)
|
|
passive = active + 1;
|
|
|
|
return passive;
|
|
}
|
|
|
|
static int iwl4965_get_channels_for_scan(struct iwl4965_priv *priv, int phymode,
|
|
u8 is_active, u8 direct_mask,
|
|
struct iwl4965_scan_channel *scan_ch)
|
|
{
|
|
const struct ieee80211_channel *channels = NULL;
|
|
const struct ieee80211_hw_mode *hw_mode;
|
|
const struct iwl4965_channel_info *ch_info;
|
|
u16 passive_dwell = 0;
|
|
u16 active_dwell = 0;
|
|
int added, i;
|
|
|
|
hw_mode = iwl4965_get_hw_mode(priv, phymode);
|
|
if (!hw_mode)
|
|
return 0;
|
|
|
|
channels = hw_mode->channels;
|
|
|
|
active_dwell = iwl4965_get_active_dwell_time(priv, phymode);
|
|
passive_dwell = iwl4965_get_passive_dwell_time(priv, phymode);
|
|
|
|
for (i = 0, added = 0; i < hw_mode->num_channels; i++) {
|
|
if (channels[i].chan ==
|
|
le16_to_cpu(priv->active_rxon.channel)) {
|
|
if (iwl4965_is_associated(priv)) {
|
|
IWL_DEBUG_SCAN
|
|
("Skipping current channel %d\n",
|
|
le16_to_cpu(priv->active_rxon.channel));
|
|
continue;
|
|
}
|
|
} else if (priv->only_active_channel)
|
|
continue;
|
|
|
|
scan_ch->channel = channels[i].chan;
|
|
|
|
ch_info = iwl4965_get_channel_info(priv, phymode,
|
|
scan_ch->channel);
|
|
if (!is_channel_valid(ch_info)) {
|
|
IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
|
|
scan_ch->channel);
|
|
continue;
|
|
}
|
|
|
|
if (!is_active || is_channel_passive(ch_info) ||
|
|
!(channels[i].flag & IEEE80211_CHAN_W_ACTIVE_SCAN))
|
|
scan_ch->type = 0; /* passive */
|
|
else
|
|
scan_ch->type = 1; /* active */
|
|
|
|
if (scan_ch->type & 1)
|
|
scan_ch->type |= (direct_mask << 1);
|
|
|
|
if (is_channel_narrow(ch_info))
|
|
scan_ch->type |= (1 << 7);
|
|
|
|
scan_ch->active_dwell = cpu_to_le16(active_dwell);
|
|
scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
|
|
|
|
/* Set txpower levels to defaults */
|
|
scan_ch->tpc.dsp_atten = 110;
|
|
/* scan_pwr_info->tpc.dsp_atten; */
|
|
|
|
/*scan_pwr_info->tpc.tx_gain; */
|
|
if (phymode == MODE_IEEE80211A)
|
|
scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
|
|
else {
|
|
scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
|
|
/* NOTE: if we were doing 6Mb OFDM for scans we'd use
|
|
* power level:
|
|
* scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
|
|
*/
|
|
}
|
|
|
|
IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
|
|
scan_ch->channel,
|
|
(scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
|
|
(scan_ch->type & 1) ?
|
|
active_dwell : passive_dwell);
|
|
|
|
scan_ch++;
|
|
added++;
|
|
}
|
|
|
|
IWL_DEBUG_SCAN("total channels to scan %d \n", added);
|
|
return added;
|
|
}
|
|
|
|
static void iwl4965_reset_channel_flag(struct iwl4965_priv *priv)
|
|
{
|
|
int i, j;
|
|
for (i = 0; i < 3; i++) {
|
|
struct ieee80211_hw_mode *hw_mode = (void *)&priv->modes[i];
|
|
for (j = 0; j < hw_mode->num_channels; j++)
|
|
hw_mode->channels[j].flag = hw_mode->channels[j].val;
|
|
}
|
|
}
|
|
|
|
static void iwl4965_init_hw_rates(struct iwl4965_priv *priv,
|
|
struct ieee80211_rate *rates)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < IWL_RATE_COUNT; i++) {
|
|
rates[i].rate = iwl4965_rates[i].ieee * 5;
|
|
rates[i].val = i; /* Rate scaling will work on indexes */
|
|
rates[i].val2 = i;
|
|
rates[i].flags = IEEE80211_RATE_SUPPORTED;
|
|
/* Only OFDM have the bits-per-symbol set */
|
|
if ((i <= IWL_LAST_OFDM_RATE) && (i >= IWL_FIRST_OFDM_RATE))
|
|
rates[i].flags |= IEEE80211_RATE_OFDM;
|
|
else {
|
|
/*
|
|
* If CCK 1M then set rate flag to CCK else CCK_2
|
|
* which is CCK | PREAMBLE2
|
|
*/
|
|
rates[i].flags |= (iwl4965_rates[i].plcp == 10) ?
|
|
IEEE80211_RATE_CCK : IEEE80211_RATE_CCK_2;
|
|
}
|
|
|
|
/* Set up which ones are basic rates... */
|
|
if (IWL_BASIC_RATES_MASK & (1 << i))
|
|
rates[i].flags |= IEEE80211_RATE_BASIC;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* iwl4965_init_geos - Initialize mac80211's geo/channel info based from eeprom
|
|
*/
|
|
static int iwl4965_init_geos(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_channel_info *ch;
|
|
struct ieee80211_hw_mode *modes;
|
|
struct ieee80211_channel *channels;
|
|
struct ieee80211_channel *geo_ch;
|
|
struct ieee80211_rate *rates;
|
|
int i = 0;
|
|
enum {
|
|
A = 0,
|
|
B = 1,
|
|
G = 2,
|
|
};
|
|
int mode_count = 3;
|
|
|
|
if (priv->modes) {
|
|
IWL_DEBUG_INFO("Geography modes already initialized.\n");
|
|
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
|
|
return 0;
|
|
}
|
|
|
|
modes = kzalloc(sizeof(struct ieee80211_hw_mode) * mode_count,
|
|
GFP_KERNEL);
|
|
if (!modes)
|
|
return -ENOMEM;
|
|
|
|
channels = kzalloc(sizeof(struct ieee80211_channel) *
|
|
priv->channel_count, GFP_KERNEL);
|
|
if (!channels) {
|
|
kfree(modes);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_MAX_RATES + 1)),
|
|
GFP_KERNEL);
|
|
if (!rates) {
|
|
kfree(modes);
|
|
kfree(channels);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* 0 = 802.11a
|
|
* 1 = 802.11b
|
|
* 2 = 802.11g
|
|
*/
|
|
|
|
/* 5.2GHz channels start after the 2.4GHz channels */
|
|
modes[A].mode = MODE_IEEE80211A;
|
|
modes[A].channels = &channels[ARRAY_SIZE(iwl4965_eeprom_band_1)];
|
|
modes[A].rates = rates;
|
|
modes[A].num_rates = 8; /* just OFDM */
|
|
modes[A].rates = &rates[4];
|
|
modes[A].num_channels = 0;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
iwl4965_init_ht_hw_capab(&modes[A].ht_info, MODE_IEEE80211A);
|
|
#endif
|
|
|
|
modes[B].mode = MODE_IEEE80211B;
|
|
modes[B].channels = channels;
|
|
modes[B].rates = rates;
|
|
modes[B].num_rates = 4; /* just CCK */
|
|
modes[B].num_channels = 0;
|
|
|
|
modes[G].mode = MODE_IEEE80211G;
|
|
modes[G].channels = channels;
|
|
modes[G].rates = rates;
|
|
modes[G].num_rates = 12; /* OFDM & CCK */
|
|
modes[G].num_channels = 0;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
iwl4965_init_ht_hw_capab(&modes[G].ht_info, MODE_IEEE80211G);
|
|
#endif
|
|
|
|
priv->ieee_channels = channels;
|
|
priv->ieee_rates = rates;
|
|
|
|
iwl4965_init_hw_rates(priv, rates);
|
|
|
|
for (i = 0, geo_ch = channels; i < priv->channel_count; i++) {
|
|
ch = &priv->channel_info[i];
|
|
|
|
if (!is_channel_valid(ch)) {
|
|
IWL_DEBUG_INFO("Channel %d [%sGHz] is restricted -- "
|
|
"skipping.\n",
|
|
ch->channel, is_channel_a_band(ch) ?
|
|
"5.2" : "2.4");
|
|
continue;
|
|
}
|
|
|
|
if (is_channel_a_band(ch)) {
|
|
geo_ch = &modes[A].channels[modes[A].num_channels++];
|
|
} else {
|
|
geo_ch = &modes[B].channels[modes[B].num_channels++];
|
|
modes[G].num_channels++;
|
|
}
|
|
|
|
geo_ch->freq = ieee80211chan2mhz(ch->channel);
|
|
geo_ch->chan = ch->channel;
|
|
geo_ch->power_level = ch->max_power_avg;
|
|
geo_ch->antenna_max = 0xff;
|
|
|
|
if (is_channel_valid(ch)) {
|
|
geo_ch->flag = IEEE80211_CHAN_W_SCAN;
|
|
if (ch->flags & EEPROM_CHANNEL_IBSS)
|
|
geo_ch->flag |= IEEE80211_CHAN_W_IBSS;
|
|
|
|
if (ch->flags & EEPROM_CHANNEL_ACTIVE)
|
|
geo_ch->flag |= IEEE80211_CHAN_W_ACTIVE_SCAN;
|
|
|
|
if (ch->flags & EEPROM_CHANNEL_RADAR)
|
|
geo_ch->flag |= IEEE80211_CHAN_W_RADAR_DETECT;
|
|
|
|
if (ch->max_power_avg > priv->max_channel_txpower_limit)
|
|
priv->max_channel_txpower_limit =
|
|
ch->max_power_avg;
|
|
}
|
|
|
|
geo_ch->val = geo_ch->flag;
|
|
}
|
|
|
|
if ((modes[A].num_channels == 0) && priv->is_abg) {
|
|
printk(KERN_INFO DRV_NAME
|
|
": Incorrectly detected BG card as ABG. Please send "
|
|
"your PCI ID 0x%04X:0x%04X to maintainer.\n",
|
|
priv->pci_dev->device, priv->pci_dev->subsystem_device);
|
|
priv->is_abg = 0;
|
|
}
|
|
|
|
printk(KERN_INFO DRV_NAME
|
|
": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
|
|
modes[G].num_channels, modes[A].num_channels);
|
|
|
|
/*
|
|
* NOTE: We register these in preference of order -- the
|
|
* stack doesn't currently (as of 7.0.6 / Apr 24 '07) pick
|
|
* a phymode based on rates or AP capabilities but seems to
|
|
* configure it purely on if the channel being configured
|
|
* is supported by a mode -- and the first match is taken
|
|
*/
|
|
|
|
if (modes[G].num_channels)
|
|
ieee80211_register_hwmode(priv->hw, &modes[G]);
|
|
if (modes[B].num_channels)
|
|
ieee80211_register_hwmode(priv->hw, &modes[B]);
|
|
if (modes[A].num_channels)
|
|
ieee80211_register_hwmode(priv->hw, &modes[A]);
|
|
|
|
priv->modes = modes;
|
|
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* iwl4965_free_geos - undo allocations in iwl4965_init_geos
|
|
*/
|
|
static void iwl4965_free_geos(struct iwl4965_priv *priv)
|
|
{
|
|
kfree(priv->modes);
|
|
kfree(priv->ieee_channels);
|
|
kfree(priv->ieee_rates);
|
|
clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* uCode download functions
|
|
*
|
|
******************************************************************************/
|
|
|
|
static void iwl4965_dealloc_ucode_pci(struct iwl4965_priv *priv)
|
|
{
|
|
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
|
|
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
|
|
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
|
|
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
|
|
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
|
|
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_verify_inst_full - verify runtime uCode image in card vs. host,
|
|
* looking at all data.
|
|
*/
|
|
static int iwl4965_verify_inst_full(struct iwl4965_priv *priv, __le32 *image,
|
|
u32 len)
|
|
{
|
|
u32 val;
|
|
u32 save_len = len;
|
|
int rc = 0;
|
|
u32 errcnt;
|
|
|
|
IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
iwl4965_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
|
|
|
|
errcnt = 0;
|
|
for (; len > 0; len -= sizeof(u32), image++) {
|
|
/* read data comes through single port, auto-incr addr */
|
|
/* NOTE: Use the debugless read so we don't flood kernel log
|
|
* if IWL_DL_IO is set */
|
|
val = _iwl4965_read_direct32(priv, HBUS_TARG_MEM_RDAT);
|
|
if (val != le32_to_cpu(*image)) {
|
|
IWL_ERROR("uCode INST section is invalid at "
|
|
"offset 0x%x, is 0x%x, s/b 0x%x\n",
|
|
save_len - len, val, le32_to_cpu(*image));
|
|
rc = -EIO;
|
|
errcnt++;
|
|
if (errcnt >= 20)
|
|
break;
|
|
}
|
|
}
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
|
|
if (!errcnt)
|
|
IWL_DEBUG_INFO
|
|
("ucode image in INSTRUCTION memory is good\n");
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_verify_inst_sparse - verify runtime uCode image in card vs. host,
|
|
* using sample data 100 bytes apart. If these sample points are good,
|
|
* it's a pretty good bet that everything between them is good, too.
|
|
*/
|
|
static int iwl4965_verify_inst_sparse(struct iwl4965_priv *priv, __le32 *image, u32 len)
|
|
{
|
|
u32 val;
|
|
int rc = 0;
|
|
u32 errcnt = 0;
|
|
u32 i;
|
|
|
|
IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
|
|
/* read data comes through single port, auto-incr addr */
|
|
/* NOTE: Use the debugless read so we don't flood kernel log
|
|
* if IWL_DL_IO is set */
|
|
iwl4965_write_direct32(priv, HBUS_TARG_MEM_RADDR,
|
|
i + RTC_INST_LOWER_BOUND);
|
|
val = _iwl4965_read_direct32(priv, HBUS_TARG_MEM_RDAT);
|
|
if (val != le32_to_cpu(*image)) {
|
|
#if 0 /* Enable this if you want to see details */
|
|
IWL_ERROR("uCode INST section is invalid at "
|
|
"offset 0x%x, is 0x%x, s/b 0x%x\n",
|
|
i, val, *image);
|
|
#endif
|
|
rc = -EIO;
|
|
errcnt++;
|
|
if (errcnt >= 3)
|
|
break;
|
|
}
|
|
}
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_verify_ucode - determine which instruction image is in SRAM,
|
|
* and verify its contents
|
|
*/
|
|
static int iwl4965_verify_ucode(struct iwl4965_priv *priv)
|
|
{
|
|
__le32 *image;
|
|
u32 len;
|
|
int rc = 0;
|
|
|
|
/* Try bootstrap */
|
|
image = (__le32 *)priv->ucode_boot.v_addr;
|
|
len = priv->ucode_boot.len;
|
|
rc = iwl4965_verify_inst_sparse(priv, image, len);
|
|
if (rc == 0) {
|
|
IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Try initialize */
|
|
image = (__le32 *)priv->ucode_init.v_addr;
|
|
len = priv->ucode_init.len;
|
|
rc = iwl4965_verify_inst_sparse(priv, image, len);
|
|
if (rc == 0) {
|
|
IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Try runtime/protocol */
|
|
image = (__le32 *)priv->ucode_code.v_addr;
|
|
len = priv->ucode_code.len;
|
|
rc = iwl4965_verify_inst_sparse(priv, image, len);
|
|
if (rc == 0) {
|
|
IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
|
|
return 0;
|
|
}
|
|
|
|
IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
|
|
|
|
/* Since nothing seems to match, show first several data entries in
|
|
* instruction SRAM, so maybe visual inspection will give a clue.
|
|
* Selection of bootstrap image (vs. other images) is arbitrary. */
|
|
image = (__le32 *)priv->ucode_boot.v_addr;
|
|
len = priv->ucode_boot.len;
|
|
rc = iwl4965_verify_inst_full(priv, image, len);
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/* check contents of special bootstrap uCode SRAM */
|
|
static int iwl4965_verify_bsm(struct iwl4965_priv *priv)
|
|
{
|
|
__le32 *image = priv->ucode_boot.v_addr;
|
|
u32 len = priv->ucode_boot.len;
|
|
u32 reg;
|
|
u32 val;
|
|
|
|
IWL_DEBUG_INFO("Begin verify bsm\n");
|
|
|
|
/* verify BSM SRAM contents */
|
|
val = iwl4965_read_prph(priv, BSM_WR_DWCOUNT_REG);
|
|
for (reg = BSM_SRAM_LOWER_BOUND;
|
|
reg < BSM_SRAM_LOWER_BOUND + len;
|
|
reg += sizeof(u32), image ++) {
|
|
val = iwl4965_read_prph(priv, reg);
|
|
if (val != le32_to_cpu(*image)) {
|
|
IWL_ERROR("BSM uCode verification failed at "
|
|
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
|
|
BSM_SRAM_LOWER_BOUND,
|
|
reg - BSM_SRAM_LOWER_BOUND, len,
|
|
val, le32_to_cpu(*image));
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_load_bsm - Load bootstrap instructions
|
|
*
|
|
* BSM operation:
|
|
*
|
|
* The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
|
|
* in special SRAM that does not power down during RFKILL. When powering back
|
|
* up after power-saving sleeps (or during initial uCode load), the BSM loads
|
|
* the bootstrap program into the on-board processor, and starts it.
|
|
*
|
|
* The bootstrap program loads (via DMA) instructions and data for a new
|
|
* program from host DRAM locations indicated by the host driver in the
|
|
* BSM_DRAM_* registers. Once the new program is loaded, it starts
|
|
* automatically.
|
|
*
|
|
* When initializing the NIC, the host driver points the BSM to the
|
|
* "initialize" uCode image. This uCode sets up some internal data, then
|
|
* notifies host via "initialize alive" that it is complete.
|
|
*
|
|
* The host then replaces the BSM_DRAM_* pointer values to point to the
|
|
* normal runtime uCode instructions and a backup uCode data cache buffer
|
|
* (filled initially with starting data values for the on-board processor),
|
|
* then triggers the "initialize" uCode to load and launch the runtime uCode,
|
|
* which begins normal operation.
|
|
*
|
|
* When doing a power-save shutdown, runtime uCode saves data SRAM into
|
|
* the backup data cache in DRAM before SRAM is powered down.
|
|
*
|
|
* When powering back up, the BSM loads the bootstrap program. This reloads
|
|
* the runtime uCode instructions and the backup data cache into SRAM,
|
|
* and re-launches the runtime uCode from where it left off.
|
|
*/
|
|
static int iwl4965_load_bsm(struct iwl4965_priv *priv)
|
|
{
|
|
__le32 *image = priv->ucode_boot.v_addr;
|
|
u32 len = priv->ucode_boot.len;
|
|
dma_addr_t pinst;
|
|
dma_addr_t pdata;
|
|
u32 inst_len;
|
|
u32 data_len;
|
|
int rc;
|
|
int i;
|
|
u32 done;
|
|
u32 reg_offset;
|
|
|
|
IWL_DEBUG_INFO("Begin load bsm\n");
|
|
|
|
/* make sure bootstrap program is no larger than BSM's SRAM size */
|
|
if (len > IWL_MAX_BSM_SIZE)
|
|
return -EINVAL;
|
|
|
|
/* Tell bootstrap uCode where to find the "Initialize" uCode
|
|
* in host DRAM ... host DRAM physical address bits 35:4 for 4965.
|
|
* NOTE: iwl4965_initialize_alive_start() will replace these values,
|
|
* after the "initialize" uCode has run, to point to
|
|
* runtime/protocol instructions and backup data cache. */
|
|
pinst = priv->ucode_init.p_addr >> 4;
|
|
pdata = priv->ucode_init_data.p_addr >> 4;
|
|
inst_len = priv->ucode_init.len;
|
|
data_len = priv->ucode_init_data.len;
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
iwl4965_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
|
|
iwl4965_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
|
|
iwl4965_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
|
|
iwl4965_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
|
|
|
|
/* Fill BSM memory with bootstrap instructions */
|
|
for (reg_offset = BSM_SRAM_LOWER_BOUND;
|
|
reg_offset < BSM_SRAM_LOWER_BOUND + len;
|
|
reg_offset += sizeof(u32), image++)
|
|
_iwl4965_write_prph(priv, reg_offset,
|
|
le32_to_cpu(*image));
|
|
|
|
rc = iwl4965_verify_bsm(priv);
|
|
if (rc) {
|
|
iwl4965_release_nic_access(priv);
|
|
return rc;
|
|
}
|
|
|
|
/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
|
|
iwl4965_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
|
|
iwl4965_write_prph(priv, BSM_WR_MEM_DST_REG,
|
|
RTC_INST_LOWER_BOUND);
|
|
iwl4965_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
|
|
|
|
/* Load bootstrap code into instruction SRAM now,
|
|
* to prepare to load "initialize" uCode */
|
|
iwl4965_write_prph(priv, BSM_WR_CTRL_REG,
|
|
BSM_WR_CTRL_REG_BIT_START);
|
|
|
|
/* Wait for load of bootstrap uCode to finish */
|
|
for (i = 0; i < 100; i++) {
|
|
done = iwl4965_read_prph(priv, BSM_WR_CTRL_REG);
|
|
if (!(done & BSM_WR_CTRL_REG_BIT_START))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
if (i < 100)
|
|
IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
|
|
else {
|
|
IWL_ERROR("BSM write did not complete!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* Enable future boot loads whenever power management unit triggers it
|
|
* (e.g. when powering back up after power-save shutdown) */
|
|
iwl4965_write_prph(priv, BSM_WR_CTRL_REG,
|
|
BSM_WR_CTRL_REG_BIT_START_EN);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_nic_start(struct iwl4965_priv *priv)
|
|
{
|
|
/* Remove all resets to allow NIC to operate */
|
|
iwl4965_write32(priv, CSR_RESET, 0);
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_read_ucode - Read uCode images from disk file.
|
|
*
|
|
* Copy into buffers for card to fetch via bus-mastering
|
|
*/
|
|
static int iwl4965_read_ucode(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_ucode *ucode;
|
|
int ret;
|
|
const struct firmware *ucode_raw;
|
|
const char *name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode";
|
|
u8 *src;
|
|
size_t len;
|
|
u32 ver, inst_size, data_size, init_size, init_data_size, boot_size;
|
|
|
|
/* Ask kernel firmware_class module to get the boot firmware off disk.
|
|
* request_firmware() is synchronous, file is in memory on return. */
|
|
ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev);
|
|
if (ret < 0) {
|
|
IWL_ERROR("%s firmware file req failed: Reason %d\n",
|
|
name, ret);
|
|
goto error;
|
|
}
|
|
|
|
IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
|
|
name, ucode_raw->size);
|
|
|
|
/* Make sure that we got at least our header! */
|
|
if (ucode_raw->size < sizeof(*ucode)) {
|
|
IWL_ERROR("File size way too small!\n");
|
|
ret = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
|
|
/* Data from ucode file: header followed by uCode images */
|
|
ucode = (void *)ucode_raw->data;
|
|
|
|
ver = le32_to_cpu(ucode->ver);
|
|
inst_size = le32_to_cpu(ucode->inst_size);
|
|
data_size = le32_to_cpu(ucode->data_size);
|
|
init_size = le32_to_cpu(ucode->init_size);
|
|
init_data_size = le32_to_cpu(ucode->init_data_size);
|
|
boot_size = le32_to_cpu(ucode->boot_size);
|
|
|
|
IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver);
|
|
IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n",
|
|
inst_size);
|
|
IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n",
|
|
data_size);
|
|
IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n",
|
|
init_size);
|
|
IWL_DEBUG_INFO("f/w package hdr init data size = %u\n",
|
|
init_data_size);
|
|
IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n",
|
|
boot_size);
|
|
|
|
/* Verify size of file vs. image size info in file's header */
|
|
if (ucode_raw->size < sizeof(*ucode) +
|
|
inst_size + data_size + init_size +
|
|
init_data_size + boot_size) {
|
|
|
|
IWL_DEBUG_INFO("uCode file size %d too small\n",
|
|
(int)ucode_raw->size);
|
|
ret = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
|
|
/* Verify that uCode images will fit in card's SRAM */
|
|
if (inst_size > IWL_MAX_INST_SIZE) {
|
|
IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
|
|
inst_size);
|
|
ret = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
|
|
if (data_size > IWL_MAX_DATA_SIZE) {
|
|
IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
|
|
data_size);
|
|
ret = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
if (init_size > IWL_MAX_INST_SIZE) {
|
|
IWL_DEBUG_INFO
|
|
("uCode init instr len %d too large to fit in\n",
|
|
init_size);
|
|
ret = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
if (init_data_size > IWL_MAX_DATA_SIZE) {
|
|
IWL_DEBUG_INFO
|
|
("uCode init data len %d too large to fit in\n",
|
|
init_data_size);
|
|
ret = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
if (boot_size > IWL_MAX_BSM_SIZE) {
|
|
IWL_DEBUG_INFO
|
|
("uCode boot instr len %d too large to fit in\n",
|
|
boot_size);
|
|
ret = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
|
|
/* Allocate ucode buffers for card's bus-master loading ... */
|
|
|
|
/* Runtime instructions and 2 copies of data:
|
|
* 1) unmodified from disk
|
|
* 2) backup cache for save/restore during power-downs */
|
|
priv->ucode_code.len = inst_size;
|
|
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
|
|
|
|
priv->ucode_data.len = data_size;
|
|
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
|
|
|
|
priv->ucode_data_backup.len = data_size;
|
|
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
|
|
|
|
/* Initialization instructions and data */
|
|
if (init_size && init_data_size) {
|
|
priv->ucode_init.len = init_size;
|
|
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
|
|
|
|
priv->ucode_init_data.len = init_data_size;
|
|
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
|
|
|
|
if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
|
|
goto err_pci_alloc;
|
|
}
|
|
|
|
/* Bootstrap (instructions only, no data) */
|
|
if (boot_size) {
|
|
priv->ucode_boot.len = boot_size;
|
|
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
|
|
|
|
if (!priv->ucode_boot.v_addr)
|
|
goto err_pci_alloc;
|
|
}
|
|
|
|
/* Copy images into buffers for card's bus-master reads ... */
|
|
|
|
/* Runtime instructions (first block of data in file) */
|
|
src = &ucode->data[0];
|
|
len = priv->ucode_code.len;
|
|
IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len);
|
|
memcpy(priv->ucode_code.v_addr, src, len);
|
|
IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
|
|
priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
|
|
|
|
/* Runtime data (2nd block)
|
|
* NOTE: Copy into backup buffer will be done in iwl4965_up() */
|
|
src = &ucode->data[inst_size];
|
|
len = priv->ucode_data.len;
|
|
IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len);
|
|
memcpy(priv->ucode_data.v_addr, src, len);
|
|
memcpy(priv->ucode_data_backup.v_addr, src, len);
|
|
|
|
/* Initialization instructions (3rd block) */
|
|
if (init_size) {
|
|
src = &ucode->data[inst_size + data_size];
|
|
len = priv->ucode_init.len;
|
|
IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
|
|
len);
|
|
memcpy(priv->ucode_init.v_addr, src, len);
|
|
}
|
|
|
|
/* Initialization data (4th block) */
|
|
if (init_data_size) {
|
|
src = &ucode->data[inst_size + data_size + init_size];
|
|
len = priv->ucode_init_data.len;
|
|
IWL_DEBUG_INFO("Copying (but not loading) init data len %Zd\n",
|
|
len);
|
|
memcpy(priv->ucode_init_data.v_addr, src, len);
|
|
}
|
|
|
|
/* Bootstrap instructions (5th block) */
|
|
src = &ucode->data[inst_size + data_size + init_size + init_data_size];
|
|
len = priv->ucode_boot.len;
|
|
IWL_DEBUG_INFO("Copying (but not loading) boot instr len %Zd\n", len);
|
|
memcpy(priv->ucode_boot.v_addr, src, len);
|
|
|
|
/* We have our copies now, allow OS release its copies */
|
|
release_firmware(ucode_raw);
|
|
return 0;
|
|
|
|
err_pci_alloc:
|
|
IWL_ERROR("failed to allocate pci memory\n");
|
|
ret = -ENOMEM;
|
|
iwl4965_dealloc_ucode_pci(priv);
|
|
|
|
err_release:
|
|
release_firmware(ucode_raw);
|
|
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_set_ucode_ptrs - Set uCode address location
|
|
*
|
|
* Tell initialization uCode where to find runtime uCode.
|
|
*
|
|
* BSM registers initially contain pointers to initialization uCode.
|
|
* We need to replace them to load runtime uCode inst and data,
|
|
* and to save runtime data when powering down.
|
|
*/
|
|
static int iwl4965_set_ucode_ptrs(struct iwl4965_priv *priv)
|
|
{
|
|
dma_addr_t pinst;
|
|
dma_addr_t pdata;
|
|
int rc = 0;
|
|
unsigned long flags;
|
|
|
|
/* bits 35:4 for 4965 */
|
|
pinst = priv->ucode_code.p_addr >> 4;
|
|
pdata = priv->ucode_data_backup.p_addr >> 4;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/* Tell bootstrap uCode where to find image to load */
|
|
iwl4965_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
|
|
iwl4965_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
|
|
iwl4965_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
|
|
priv->ucode_data.len);
|
|
|
|
/* Inst bytecount must be last to set up, bit 31 signals uCode
|
|
* that all new ptr/size info is in place */
|
|
iwl4965_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
|
|
priv->ucode_code.len | BSM_DRAM_INST_LOAD);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
|
|
*
|
|
* Called after REPLY_ALIVE notification received from "initialize" uCode.
|
|
*
|
|
* The 4965 "initialize" ALIVE reply contains calibration data for:
|
|
* Voltage, temperature, and MIMO tx gain correction, now stored in priv
|
|
* (3945 does not contain this data).
|
|
*
|
|
* Tell "initialize" uCode to go ahead and load the runtime uCode.
|
|
*/
|
|
static void iwl4965_init_alive_start(struct iwl4965_priv *priv)
|
|
{
|
|
/* Check alive response for "valid" sign from uCode */
|
|
if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
|
|
/* We had an error bringing up the hardware, so take it
|
|
* all the way back down so we can try again */
|
|
IWL_DEBUG_INFO("Initialize Alive failed.\n");
|
|
goto restart;
|
|
}
|
|
|
|
/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
|
|
* This is a paranoid check, because we would not have gotten the
|
|
* "initialize" alive if code weren't properly loaded. */
|
|
if (iwl4965_verify_ucode(priv)) {
|
|
/* Runtime instruction load was bad;
|
|
* take it all the way back down so we can try again */
|
|
IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
|
|
goto restart;
|
|
}
|
|
|
|
/* Calculate temperature */
|
|
priv->temperature = iwl4965_get_temperature(priv);
|
|
|
|
/* Send pointers to protocol/runtime uCode image ... init code will
|
|
* load and launch runtime uCode, which will send us another "Alive"
|
|
* notification. */
|
|
IWL_DEBUG_INFO("Initialization Alive received.\n");
|
|
if (iwl4965_set_ucode_ptrs(priv)) {
|
|
/* Runtime instruction load won't happen;
|
|
* take it all the way back down so we can try again */
|
|
IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
|
|
goto restart;
|
|
}
|
|
return;
|
|
|
|
restart:
|
|
queue_work(priv->workqueue, &priv->restart);
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_alive_start - called after REPLY_ALIVE notification received
|
|
* from protocol/runtime uCode (initialization uCode's
|
|
* Alive gets handled by iwl4965_init_alive_start()).
|
|
*/
|
|
static void iwl4965_alive_start(struct iwl4965_priv *priv)
|
|
{
|
|
int rc = 0;
|
|
|
|
IWL_DEBUG_INFO("Runtime Alive received.\n");
|
|
|
|
if (priv->card_alive.is_valid != UCODE_VALID_OK) {
|
|
/* We had an error bringing up the hardware, so take it
|
|
* all the way back down so we can try again */
|
|
IWL_DEBUG_INFO("Alive failed.\n");
|
|
goto restart;
|
|
}
|
|
|
|
/* Initialize uCode has loaded Runtime uCode ... verify inst image.
|
|
* This is a paranoid check, because we would not have gotten the
|
|
* "runtime" alive if code weren't properly loaded. */
|
|
if (iwl4965_verify_ucode(priv)) {
|
|
/* Runtime instruction load was bad;
|
|
* take it all the way back down so we can try again */
|
|
IWL_DEBUG_INFO("Bad runtime uCode load.\n");
|
|
goto restart;
|
|
}
|
|
|
|
iwl4965_clear_stations_table(priv);
|
|
|
|
rc = iwl4965_alive_notify(priv);
|
|
if (rc) {
|
|
IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n",
|
|
rc);
|
|
goto restart;
|
|
}
|
|
|
|
/* After the ALIVE response, we can send host commands to 4965 uCode */
|
|
set_bit(STATUS_ALIVE, &priv->status);
|
|
|
|
/* Clear out the uCode error bit if it is set */
|
|
clear_bit(STATUS_FW_ERROR, &priv->status);
|
|
|
|
if (iwl4965_is_rfkill(priv))
|
|
return;
|
|
|
|
ieee80211_start_queues(priv->hw);
|
|
|
|
priv->active_rate = priv->rates_mask;
|
|
priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
|
|
|
|
iwl4965_send_power_mode(priv, IWL_POWER_LEVEL(priv->power_mode));
|
|
|
|
if (iwl4965_is_associated(priv)) {
|
|
struct iwl4965_rxon_cmd *active_rxon =
|
|
(struct iwl4965_rxon_cmd *)(&priv->active_rxon);
|
|
|
|
memcpy(&priv->staging_rxon, &priv->active_rxon,
|
|
sizeof(priv->staging_rxon));
|
|
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
} else {
|
|
/* Initialize our rx_config data */
|
|
iwl4965_connection_init_rx_config(priv);
|
|
memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
|
|
}
|
|
|
|
/* Configure Bluetooth device coexistence support */
|
|
iwl4965_send_bt_config(priv);
|
|
|
|
/* Configure the adapter for unassociated operation */
|
|
iwl4965_commit_rxon(priv);
|
|
|
|
/* At this point, the NIC is initialized and operational */
|
|
priv->notif_missed_beacons = 0;
|
|
set_bit(STATUS_READY, &priv->status);
|
|
|
|
iwl4965_rf_kill_ct_config(priv);
|
|
|
|
IWL_DEBUG_INFO("ALIVE processing complete.\n");
|
|
wake_up_interruptible(&priv->wait_command_queue);
|
|
|
|
if (priv->error_recovering)
|
|
iwl4965_error_recovery(priv);
|
|
|
|
return;
|
|
|
|
restart:
|
|
queue_work(priv->workqueue, &priv->restart);
|
|
}
|
|
|
|
static void iwl4965_cancel_deferred_work(struct iwl4965_priv *priv);
|
|
|
|
static void __iwl4965_down(struct iwl4965_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
|
|
struct ieee80211_conf *conf = NULL;
|
|
|
|
IWL_DEBUG_INFO(DRV_NAME " is going down\n");
|
|
|
|
conf = ieee80211_get_hw_conf(priv->hw);
|
|
|
|
if (!exit_pending)
|
|
set_bit(STATUS_EXIT_PENDING, &priv->status);
|
|
|
|
iwl4965_clear_stations_table(priv);
|
|
|
|
/* Unblock any waiting calls */
|
|
wake_up_interruptible_all(&priv->wait_command_queue);
|
|
|
|
/* Wipe out the EXIT_PENDING status bit if we are not actually
|
|
* exiting the module */
|
|
if (!exit_pending)
|
|
clear_bit(STATUS_EXIT_PENDING, &priv->status);
|
|
|
|
/* stop and reset the on-board processor */
|
|
iwl4965_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
|
|
|
|
/* tell the device to stop sending interrupts */
|
|
iwl4965_disable_interrupts(priv);
|
|
|
|
if (priv->mac80211_registered)
|
|
ieee80211_stop_queues(priv->hw);
|
|
|
|
/* If we have not previously called iwl4965_init() then
|
|
* clear all bits but the RF Kill and SUSPEND bits and return */
|
|
if (!iwl4965_is_init(priv)) {
|
|
priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
|
|
STATUS_RF_KILL_HW |
|
|
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
|
|
STATUS_RF_KILL_SW |
|
|
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
|
|
STATUS_IN_SUSPEND;
|
|
goto exit;
|
|
}
|
|
|
|
/* ...otherwise clear out all the status bits but the RF Kill and
|
|
* SUSPEND bits and continue taking the NIC down. */
|
|
priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
|
|
STATUS_RF_KILL_HW |
|
|
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
|
|
STATUS_RF_KILL_SW |
|
|
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
|
|
STATUS_IN_SUSPEND |
|
|
test_bit(STATUS_FW_ERROR, &priv->status) <<
|
|
STATUS_FW_ERROR;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
iwl4965_clear_bit(priv, CSR_GP_CNTRL,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
iwl4965_hw_txq_ctx_stop(priv);
|
|
iwl4965_hw_rxq_stop(priv);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (!iwl4965_grab_nic_access(priv)) {
|
|
iwl4965_write_prph(priv, APMG_CLK_DIS_REG,
|
|
APMG_CLK_VAL_DMA_CLK_RQT);
|
|
iwl4965_release_nic_access(priv);
|
|
}
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
udelay(5);
|
|
|
|
iwl4965_hw_nic_stop_master(priv);
|
|
iwl4965_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
|
|
iwl4965_hw_nic_reset(priv);
|
|
|
|
exit:
|
|
memset(&priv->card_alive, 0, sizeof(struct iwl4965_alive_resp));
|
|
|
|
if (priv->ibss_beacon)
|
|
dev_kfree_skb(priv->ibss_beacon);
|
|
priv->ibss_beacon = NULL;
|
|
|
|
/* clear out any free frames */
|
|
iwl4965_clear_free_frames(priv);
|
|
}
|
|
|
|
static void iwl4965_down(struct iwl4965_priv *priv)
|
|
{
|
|
mutex_lock(&priv->mutex);
|
|
__iwl4965_down(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
iwl4965_cancel_deferred_work(priv);
|
|
}
|
|
|
|
#define MAX_HW_RESTARTS 5
|
|
|
|
static int __iwl4965_up(struct iwl4965_priv *priv)
|
|
{
|
|
int rc, i;
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
|
|
IWL_WARNING("Exit pending; will not bring the NIC up\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
|
|
IWL_WARNING("Radio disabled by SW RF kill (module "
|
|
"parameter)\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
|
|
IWL_ERROR("ucode not available for device bringup\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* If platform's RF_KILL switch is NOT set to KILL */
|
|
if (iwl4965_read32(priv, CSR_GP_CNTRL) &
|
|
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
|
|
clear_bit(STATUS_RF_KILL_HW, &priv->status);
|
|
else {
|
|
set_bit(STATUS_RF_KILL_HW, &priv->status);
|
|
if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
|
|
IWL_WARNING("Radio disabled by HW RF Kill switch\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF);
|
|
|
|
rc = iwl4965_hw_nic_init(priv);
|
|
if (rc) {
|
|
IWL_ERROR("Unable to int nic\n");
|
|
return rc;
|
|
}
|
|
|
|
/* make sure rfkill handshake bits are cleared */
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR,
|
|
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
|
|
|
|
/* clear (again), then enable host interrupts */
|
|
iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF);
|
|
iwl4965_enable_interrupts(priv);
|
|
|
|
/* really make sure rfkill handshake bits are cleared */
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
|
|
|
|
/* Copy original ucode data image from disk into backup cache.
|
|
* This will be used to initialize the on-board processor's
|
|
* data SRAM for a clean start when the runtime program first loads. */
|
|
memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
|
|
priv->ucode_data.len);
|
|
|
|
/* We return success when we resume from suspend and rf_kill is on. */
|
|
if (test_bit(STATUS_RF_KILL_HW, &priv->status))
|
|
return 0;
|
|
|
|
for (i = 0; i < MAX_HW_RESTARTS; i++) {
|
|
|
|
iwl4965_clear_stations_table(priv);
|
|
|
|
/* load bootstrap state machine,
|
|
* load bootstrap program into processor's memory,
|
|
* prepare to load the "initialize" uCode */
|
|
rc = iwl4965_load_bsm(priv);
|
|
|
|
if (rc) {
|
|
IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc);
|
|
continue;
|
|
}
|
|
|
|
/* start card; "initialize" will load runtime ucode */
|
|
iwl4965_nic_start(priv);
|
|
|
|
IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
set_bit(STATUS_EXIT_PENDING, &priv->status);
|
|
__iwl4965_down(priv);
|
|
|
|
/* tried to restart and config the device for as long as our
|
|
* patience could withstand */
|
|
IWL_ERROR("Unable to initialize device after %d attempts.\n", i);
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* Workqueue callbacks
|
|
*
|
|
*****************************************************************************/
|
|
|
|
static void iwl4965_bg_init_alive_start(struct work_struct *data)
|
|
{
|
|
struct iwl4965_priv *priv =
|
|
container_of(data, struct iwl4965_priv, init_alive_start.work);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
iwl4965_init_alive_start(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static void iwl4965_bg_alive_start(struct work_struct *data)
|
|
{
|
|
struct iwl4965_priv *priv =
|
|
container_of(data, struct iwl4965_priv, alive_start.work);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
iwl4965_alive_start(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static void iwl4965_bg_rf_kill(struct work_struct *work)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(work, struct iwl4965_priv, rf_kill);
|
|
|
|
wake_up_interruptible(&priv->wait_command_queue);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (!iwl4965_is_rfkill(priv)) {
|
|
IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL,
|
|
"HW and/or SW RF Kill no longer active, restarting "
|
|
"device\n");
|
|
if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
queue_work(priv->workqueue, &priv->restart);
|
|
} else {
|
|
|
|
if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
|
|
IWL_DEBUG_RF_KILL("Can not turn radio back on - "
|
|
"disabled by SW switch\n");
|
|
else
|
|
IWL_WARNING("Radio Frequency Kill Switch is On:\n"
|
|
"Kill switch must be turned off for "
|
|
"wireless networking to work.\n");
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
|
|
|
|
static void iwl4965_bg_scan_check(struct work_struct *data)
|
|
{
|
|
struct iwl4965_priv *priv =
|
|
container_of(data, struct iwl4965_priv, scan_check.work);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
if (test_bit(STATUS_SCANNING, &priv->status) ||
|
|
test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
|
|
IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN,
|
|
"Scan completion watchdog resetting adapter (%dms)\n",
|
|
jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
|
|
|
|
if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
iwl4965_send_scan_abort(priv);
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static void iwl4965_bg_request_scan(struct work_struct *data)
|
|
{
|
|
struct iwl4965_priv *priv =
|
|
container_of(data, struct iwl4965_priv, request_scan);
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = REPLY_SCAN_CMD,
|
|
.len = sizeof(struct iwl4965_scan_cmd),
|
|
.meta.flags = CMD_SIZE_HUGE,
|
|
};
|
|
int rc = 0;
|
|
struct iwl4965_scan_cmd *scan;
|
|
struct ieee80211_conf *conf = NULL;
|
|
u8 direct_mask;
|
|
int phymode;
|
|
|
|
conf = ieee80211_get_hw_conf(priv->hw);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (!iwl4965_is_ready(priv)) {
|
|
IWL_WARNING("request scan called when driver not ready.\n");
|
|
goto done;
|
|
}
|
|
|
|
/* Make sure the scan wasn't cancelled before this queued work
|
|
* was given the chance to run... */
|
|
if (!test_bit(STATUS_SCANNING, &priv->status))
|
|
goto done;
|
|
|
|
/* This should never be called or scheduled if there is currently
|
|
* a scan active in the hardware. */
|
|
if (test_bit(STATUS_SCAN_HW, &priv->status)) {
|
|
IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
|
|
"Ignoring second request.\n");
|
|
rc = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
|
|
IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
|
|
goto done;
|
|
}
|
|
|
|
if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
|
|
IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
|
|
goto done;
|
|
}
|
|
|
|
if (iwl4965_is_rfkill(priv)) {
|
|
IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
|
|
goto done;
|
|
}
|
|
|
|
if (!test_bit(STATUS_READY, &priv->status)) {
|
|
IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
|
|
goto done;
|
|
}
|
|
|
|
if (!priv->scan_bands) {
|
|
IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
|
|
goto done;
|
|
}
|
|
|
|
if (!priv->scan) {
|
|
priv->scan = kmalloc(sizeof(struct iwl4965_scan_cmd) +
|
|
IWL_MAX_SCAN_SIZE, GFP_KERNEL);
|
|
if (!priv->scan) {
|
|
rc = -ENOMEM;
|
|
goto done;
|
|
}
|
|
}
|
|
scan = priv->scan;
|
|
memset(scan, 0, sizeof(struct iwl4965_scan_cmd) + IWL_MAX_SCAN_SIZE);
|
|
|
|
scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
|
|
scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
|
|
|
|
if (iwl4965_is_associated(priv)) {
|
|
u16 interval = 0;
|
|
u32 extra;
|
|
u32 suspend_time = 100;
|
|
u32 scan_suspend_time = 100;
|
|
unsigned long flags;
|
|
|
|
IWL_DEBUG_INFO("Scanning while associated...\n");
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
interval = priv->beacon_int;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
scan->suspend_time = 0;
|
|
scan->max_out_time = cpu_to_le32(200 * 1024);
|
|
if (!interval)
|
|
interval = suspend_time;
|
|
|
|
extra = (suspend_time / interval) << 22;
|
|
scan_suspend_time = (extra |
|
|
((suspend_time % interval) * 1024));
|
|
scan->suspend_time = cpu_to_le32(scan_suspend_time);
|
|
IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
|
|
scan_suspend_time, interval);
|
|
}
|
|
|
|
/* We should add the ability for user to lock to PASSIVE ONLY */
|
|
if (priv->one_direct_scan) {
|
|
IWL_DEBUG_SCAN
|
|
("Kicking off one direct scan for '%s'\n",
|
|
iwl4965_escape_essid(priv->direct_ssid,
|
|
priv->direct_ssid_len));
|
|
scan->direct_scan[0].id = WLAN_EID_SSID;
|
|
scan->direct_scan[0].len = priv->direct_ssid_len;
|
|
memcpy(scan->direct_scan[0].ssid,
|
|
priv->direct_ssid, priv->direct_ssid_len);
|
|
direct_mask = 1;
|
|
} else if (!iwl4965_is_associated(priv) && priv->essid_len) {
|
|
scan->direct_scan[0].id = WLAN_EID_SSID;
|
|
scan->direct_scan[0].len = priv->essid_len;
|
|
memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
|
|
direct_mask = 1;
|
|
} else
|
|
direct_mask = 0;
|
|
|
|
/* We don't build a direct scan probe request; the uCode will do
|
|
* that based on the direct_mask added to each channel entry */
|
|
scan->tx_cmd.len = cpu_to_le16(
|
|
iwl4965_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
|
|
IWL_MAX_SCAN_SIZE - sizeof(*scan), 0));
|
|
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
|
|
scan->tx_cmd.sta_id = priv->hw_setting.bcast_sta_id;
|
|
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
|
|
|
|
/* flags + rate selection */
|
|
|
|
scan->tx_cmd.tx_flags |= cpu_to_le32(0x200);
|
|
|
|
switch (priv->scan_bands) {
|
|
case 2:
|
|
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
|
|
scan->tx_cmd.rate_n_flags =
|
|
iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
|
|
RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK);
|
|
|
|
scan->good_CRC_th = 0;
|
|
phymode = MODE_IEEE80211G;
|
|
break;
|
|
|
|
case 1:
|
|
scan->tx_cmd.rate_n_flags =
|
|
iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
|
|
RATE_MCS_ANT_B_MSK);
|
|
scan->good_CRC_th = IWL_GOOD_CRC_TH;
|
|
phymode = MODE_IEEE80211A;
|
|
break;
|
|
|
|
default:
|
|
IWL_WARNING("Invalid scan band count\n");
|
|
goto done;
|
|
}
|
|
|
|
/* select Rx chains */
|
|
|
|
/* Force use of chains B and C (0x6) for scan Rx.
|
|
* Avoid A (0x1) because of its off-channel reception on A-band.
|
|
* MIMO is not used here, but value is required to make uCode happy. */
|
|
scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
|
|
cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
|
|
(0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) |
|
|
(0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
|
|
scan->filter_flags = RXON_FILTER_PROMISC_MSK;
|
|
|
|
if (direct_mask)
|
|
IWL_DEBUG_SCAN
|
|
("Initiating direct scan for %s.\n",
|
|
iwl4965_escape_essid(priv->essid, priv->essid_len));
|
|
else
|
|
IWL_DEBUG_SCAN("Initiating indirect scan.\n");
|
|
|
|
scan->channel_count =
|
|
iwl4965_get_channels_for_scan(
|
|
priv, phymode, 1, /* active */
|
|
direct_mask,
|
|
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
|
|
|
|
cmd.len += le16_to_cpu(scan->tx_cmd.len) +
|
|
scan->channel_count * sizeof(struct iwl4965_scan_channel);
|
|
cmd.data = scan;
|
|
scan->len = cpu_to_le16(cmd.len);
|
|
|
|
set_bit(STATUS_SCAN_HW, &priv->status);
|
|
rc = iwl4965_send_cmd_sync(priv, &cmd);
|
|
if (rc)
|
|
goto done;
|
|
|
|
queue_delayed_work(priv->workqueue, &priv->scan_check,
|
|
IWL_SCAN_CHECK_WATCHDOG);
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
return;
|
|
|
|
done:
|
|
/* inform mac80211 scan aborted */
|
|
queue_work(priv->workqueue, &priv->scan_completed);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static void iwl4965_bg_up(struct work_struct *data)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(data, struct iwl4965_priv, up);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
__iwl4965_up(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static void iwl4965_bg_restart(struct work_struct *data)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(data, struct iwl4965_priv, restart);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
iwl4965_down(priv);
|
|
queue_work(priv->workqueue, &priv->up);
|
|
}
|
|
|
|
static void iwl4965_bg_rx_replenish(struct work_struct *data)
|
|
{
|
|
struct iwl4965_priv *priv =
|
|
container_of(data, struct iwl4965_priv, rx_replenish);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
iwl4965_rx_replenish(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
#define IWL_DELAY_NEXT_SCAN (HZ*2)
|
|
|
|
static void iwl4965_bg_post_associate(struct work_struct *data)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(data, struct iwl4965_priv,
|
|
post_associate.work);
|
|
|
|
int rc = 0;
|
|
struct ieee80211_conf *conf = NULL;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
|
|
IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
IWL_DEBUG_ASSOC("Associated as %d to: %s\n",
|
|
priv->assoc_id,
|
|
print_mac(mac, priv->active_rxon.bssid_addr));
|
|
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (!priv->vif || !priv->is_open) {
|
|
mutex_unlock(&priv->mutex);
|
|
return;
|
|
}
|
|
iwl4965_scan_cancel_timeout(priv, 200);
|
|
|
|
conf = ieee80211_get_hw_conf(priv->hw);
|
|
|
|
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
iwl4965_commit_rxon(priv);
|
|
|
|
memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd));
|
|
iwl4965_setup_rxon_timing(priv);
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_RXON_TIMING,
|
|
sizeof(priv->rxon_timing), &priv->rxon_timing);
|
|
if (rc)
|
|
IWL_WARNING("REPLY_RXON_TIMING failed - "
|
|
"Attempting to continue.\n");
|
|
|
|
priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
if (priv->current_ht_config.is_ht)
|
|
iwl4965_set_rxon_ht(priv, &priv->current_ht_config);
|
|
#endif /* CONFIG_IWL4965_HT*/
|
|
iwl4965_set_rxon_chain(priv);
|
|
priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
|
|
|
|
IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
|
|
priv->assoc_id, priv->beacon_int);
|
|
|
|
if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
|
|
priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
else
|
|
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
|
|
if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
|
|
if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
|
|
priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
|
|
else
|
|
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
|
|
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
|
|
|
|
}
|
|
|
|
iwl4965_commit_rxon(priv);
|
|
|
|
switch (priv->iw_mode) {
|
|
case IEEE80211_IF_TYPE_STA:
|
|
iwl4965_rate_scale_init(priv->hw, IWL_AP_ID);
|
|
break;
|
|
|
|
case IEEE80211_IF_TYPE_IBSS:
|
|
|
|
/* clear out the station table */
|
|
iwl4965_clear_stations_table(priv);
|
|
|
|
iwl4965_rxon_add_station(priv, iwl4965_broadcast_addr, 0);
|
|
iwl4965_rxon_add_station(priv, priv->bssid, 0);
|
|
iwl4965_rate_scale_init(priv->hw, IWL_STA_ID);
|
|
iwl4965_send_beacon_cmd(priv);
|
|
|
|
break;
|
|
|
|
default:
|
|
IWL_ERROR("%s Should not be called in %d mode\n",
|
|
__FUNCTION__, priv->iw_mode);
|
|
break;
|
|
}
|
|
|
|
iwl4965_sequence_reset(priv);
|
|
|
|
#ifdef CONFIG_IWL4965_SENSITIVITY
|
|
/* Enable Rx differential gain and sensitivity calibrations */
|
|
iwl4965_chain_noise_reset(priv);
|
|
priv->start_calib = 1;
|
|
#endif /* CONFIG_IWL4965_SENSITIVITY */
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
|
|
priv->assoc_station_added = 1;
|
|
|
|
#ifdef CONFIG_IWL4965_QOS
|
|
iwl4965_activate_qos(priv, 0);
|
|
#endif /* CONFIG_IWL4965_QOS */
|
|
/* we have just associated, don't start scan too early */
|
|
priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static void iwl4965_bg_abort_scan(struct work_struct *work)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(work, struct iwl4965_priv, abort_scan);
|
|
|
|
if (!iwl4965_is_ready(priv))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
set_bit(STATUS_SCAN_ABORTING, &priv->status);
|
|
iwl4965_send_scan_abort(priv);
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
|
|
|
|
static void iwl4965_bg_scan_completed(struct work_struct *work)
|
|
{
|
|
struct iwl4965_priv *priv =
|
|
container_of(work, struct iwl4965_priv, scan_completed);
|
|
|
|
IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, "SCAN complete scan\n");
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
if (test_bit(STATUS_CONF_PENDING, &priv->status))
|
|
iwl4965_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
|
|
|
|
ieee80211_scan_completed(priv->hw);
|
|
|
|
/* Since setting the TXPOWER may have been deferred while
|
|
* performing the scan, fire one off */
|
|
mutex_lock(&priv->mutex);
|
|
iwl4965_hw_reg_send_txpower(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* mac80211 entry point functions
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#define UCODE_READY_TIMEOUT (2 * HZ)
|
|
|
|
static int iwl4965_mac_start(struct ieee80211_hw *hw)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
int ret;
|
|
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
if (pci_enable_device(priv->pci_dev)) {
|
|
IWL_ERROR("Fail to pci_enable_device\n");
|
|
return -ENODEV;
|
|
}
|
|
pci_restore_state(priv->pci_dev);
|
|
pci_enable_msi(priv->pci_dev);
|
|
|
|
ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED,
|
|
DRV_NAME, priv);
|
|
if (ret) {
|
|
IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq);
|
|
goto out_disable_msi;
|
|
}
|
|
|
|
/* we should be verifying the device is ready to be opened */
|
|
mutex_lock(&priv->mutex);
|
|
|
|
memset(&priv->staging_rxon, 0, sizeof(struct iwl4965_rxon_cmd));
|
|
/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
|
|
* ucode filename and max sizes are card-specific. */
|
|
|
|
if (!priv->ucode_code.len) {
|
|
ret = iwl4965_read_ucode(priv);
|
|
if (ret) {
|
|
IWL_ERROR("Could not read microcode: %d\n", ret);
|
|
mutex_unlock(&priv->mutex);
|
|
goto out_release_irq;
|
|
}
|
|
}
|
|
|
|
ret = __iwl4965_up(priv);
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
if (ret)
|
|
goto out_release_irq;
|
|
|
|
IWL_DEBUG_INFO("Start UP work done.\n");
|
|
|
|
if (test_bit(STATUS_IN_SUSPEND, &priv->status))
|
|
return 0;
|
|
|
|
/* Wait for START_ALIVE from ucode. Otherwise callbacks from
|
|
* mac80211 will not be run successfully. */
|
|
ret = wait_event_interruptible_timeout(priv->wait_command_queue,
|
|
test_bit(STATUS_READY, &priv->status),
|
|
UCODE_READY_TIMEOUT);
|
|
if (!ret) {
|
|
if (!test_bit(STATUS_READY, &priv->status)) {
|
|
IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n",
|
|
jiffies_to_msecs(UCODE_READY_TIMEOUT));
|
|
ret = -ETIMEDOUT;
|
|
goto out_release_irq;
|
|
}
|
|
}
|
|
|
|
priv->is_open = 1;
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
return 0;
|
|
|
|
out_release_irq:
|
|
free_irq(priv->pci_dev->irq, priv);
|
|
out_disable_msi:
|
|
pci_disable_msi(priv->pci_dev);
|
|
pci_disable_device(priv->pci_dev);
|
|
priv->is_open = 0;
|
|
IWL_DEBUG_MAC80211("leave - failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static void iwl4965_mac_stop(struct ieee80211_hw *hw)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
if (!priv->is_open) {
|
|
IWL_DEBUG_MAC80211("leave - skip\n");
|
|
return;
|
|
}
|
|
|
|
priv->is_open = 0;
|
|
|
|
if (iwl4965_is_ready_rf(priv)) {
|
|
/* stop mac, cancel any scan request and clear
|
|
* RXON_FILTER_ASSOC_MSK BIT
|
|
*/
|
|
mutex_lock(&priv->mutex);
|
|
iwl4965_scan_cancel_timeout(priv, 100);
|
|
cancel_delayed_work(&priv->post_associate);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
iwl4965_down(priv);
|
|
|
|
flush_workqueue(priv->workqueue);
|
|
free_irq(priv->pci_dev->irq, priv);
|
|
pci_disable_msi(priv->pci_dev);
|
|
pci_save_state(priv->pci_dev);
|
|
pci_disable_device(priv->pci_dev);
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
}
|
|
|
|
static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
|
|
struct ieee80211_tx_control *ctl)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
|
|
IWL_DEBUG_MAC80211("leave - monitor\n");
|
|
return -1;
|
|
}
|
|
|
|
IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
|
|
ctl->tx_rate);
|
|
|
|
if (iwl4965_tx_skb(priv, skb, ctl))
|
|
dev_kfree_skb_any(skb);
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_mac_add_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_if_init_conf *conf)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
unsigned long flags;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
|
|
|
|
if (priv->vif) {
|
|
IWL_DEBUG_MAC80211("leave - vif != NULL\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->vif = conf->vif;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (conf->mac_addr) {
|
|
IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr));
|
|
memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
|
|
}
|
|
|
|
if (iwl4965_is_ready(priv))
|
|
iwl4965_set_mode(priv, conf->type);
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_mac_config - mac80211 config callback
|
|
*
|
|
* We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
|
|
* be set inappropriately and the driver currently sets the hardware up to
|
|
* use it whenever needed.
|
|
*/
|
|
static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
const struct iwl4965_channel_info *ch_info;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel);
|
|
|
|
priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
|
|
|
|
if (!iwl4965_is_ready(priv)) {
|
|
IWL_DEBUG_MAC80211("leave - not ready\n");
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
if (unlikely(!iwl4965_param_disable_hw_scan &&
|
|
test_bit(STATUS_SCANNING, &priv->status))) {
|
|
IWL_DEBUG_MAC80211("leave - scanning\n");
|
|
set_bit(STATUS_CONF_PENDING, &priv->status);
|
|
mutex_unlock(&priv->mutex);
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
ch_info = iwl4965_get_channel_info(priv, conf->phymode, conf->channel);
|
|
if (!is_channel_valid(ch_info)) {
|
|
IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
|
|
conf->channel, conf->phymode);
|
|
IWL_DEBUG_MAC80211("leave - invalid channel\n");
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
/* if we are switching fron ht to 2.4 clear flags
|
|
* from any ht related info since 2.4 does not
|
|
* support ht */
|
|
if ((le16_to_cpu(priv->staging_rxon.channel) != conf->channel)
|
|
#ifdef IEEE80211_CONF_CHANNEL_SWITCH
|
|
&& !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH)
|
|
#endif
|
|
)
|
|
priv->staging_rxon.flags = 0;
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
iwl4965_set_rxon_channel(priv, conf->phymode, conf->channel);
|
|
|
|
iwl4965_set_flags_for_phymode(priv, conf->phymode);
|
|
|
|
/* The list of supported rates and rate mask can be different
|
|
* for each phymode; since the phymode may have changed, reset
|
|
* the rate mask to what mac80211 lists */
|
|
iwl4965_set_rate(priv);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
#ifdef IEEE80211_CONF_CHANNEL_SWITCH
|
|
if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
|
|
iwl4965_hw_channel_switch(priv, conf->channel);
|
|
goto out;
|
|
}
|
|
#endif
|
|
|
|
iwl4965_radio_kill_sw(priv, !conf->radio_enabled);
|
|
|
|
if (!conf->radio_enabled) {
|
|
IWL_DEBUG_MAC80211("leave - radio disabled\n");
|
|
goto out;
|
|
}
|
|
|
|
if (iwl4965_is_rfkill(priv)) {
|
|
IWL_DEBUG_MAC80211("leave - RF kill\n");
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
iwl4965_set_rate(priv);
|
|
|
|
if (memcmp(&priv->active_rxon,
|
|
&priv->staging_rxon, sizeof(priv->staging_rxon)))
|
|
iwl4965_commit_rxon(priv);
|
|
else
|
|
IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
|
|
out:
|
|
clear_bit(STATUS_CONF_PENDING, &priv->status);
|
|
mutex_unlock(&priv->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void iwl4965_config_ap(struct iwl4965_priv *priv)
|
|
{
|
|
int rc = 0;
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
/* The following should be done only at AP bring up */
|
|
if ((priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) == 0) {
|
|
|
|
/* RXON - unassoc (to set timing command) */
|
|
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
iwl4965_commit_rxon(priv);
|
|
|
|
/* RXON Timing */
|
|
memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd));
|
|
iwl4965_setup_rxon_timing(priv);
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_RXON_TIMING,
|
|
sizeof(priv->rxon_timing), &priv->rxon_timing);
|
|
if (rc)
|
|
IWL_WARNING("REPLY_RXON_TIMING failed - "
|
|
"Attempting to continue.\n");
|
|
|
|
iwl4965_set_rxon_chain(priv);
|
|
|
|
/* FIXME: what should be the assoc_id for AP? */
|
|
priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
|
|
if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
|
|
priv->staging_rxon.flags |=
|
|
RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
else
|
|
priv->staging_rxon.flags &=
|
|
~RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
|
|
if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
|
|
if (priv->assoc_capability &
|
|
WLAN_CAPABILITY_SHORT_SLOT_TIME)
|
|
priv->staging_rxon.flags |=
|
|
RXON_FLG_SHORT_SLOT_MSK;
|
|
else
|
|
priv->staging_rxon.flags &=
|
|
~RXON_FLG_SHORT_SLOT_MSK;
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
|
|
priv->staging_rxon.flags &=
|
|
~RXON_FLG_SHORT_SLOT_MSK;
|
|
}
|
|
/* restore RXON assoc */
|
|
priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
|
|
iwl4965_commit_rxon(priv);
|
|
#ifdef CONFIG_IWL4965_QOS
|
|
iwl4965_activate_qos(priv, 1);
|
|
#endif
|
|
iwl4965_rxon_add_station(priv, iwl4965_broadcast_addr, 0);
|
|
}
|
|
iwl4965_send_beacon_cmd(priv);
|
|
|
|
/* FIXME - we need to add code here to detect a totally new
|
|
* configuration, reset the AP, unassoc, rxon timing, assoc,
|
|
* clear sta table, add BCAST sta... */
|
|
}
|
|
|
|
static int iwl4965_mac_config_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_if_conf *conf)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
DECLARE_MAC_BUF(mac);
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
if (conf == NULL)
|
|
return -EIO;
|
|
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
|
|
(!conf->beacon || !conf->ssid_len)) {
|
|
IWL_DEBUG_MAC80211
|
|
("Leaving in AP mode because HostAPD is not ready.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (!iwl4965_is_alive(priv))
|
|
return -EAGAIN;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (conf->bssid)
|
|
IWL_DEBUG_MAC80211("bssid: %s\n",
|
|
print_mac(mac, conf->bssid));
|
|
|
|
/*
|
|
* very dubious code was here; the probe filtering flag is never set:
|
|
*
|
|
if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
|
|
!(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
|
|
*/
|
|
if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
|
|
IWL_DEBUG_MAC80211("leave - scanning\n");
|
|
mutex_unlock(&priv->mutex);
|
|
return 0;
|
|
}
|
|
|
|
if (priv->vif != vif) {
|
|
IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
|
|
mutex_unlock(&priv->mutex);
|
|
return 0;
|
|
}
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
|
|
if (!conf->bssid) {
|
|
conf->bssid = priv->mac_addr;
|
|
memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
|
|
IWL_DEBUG_MAC80211("bssid was set to: %s\n",
|
|
print_mac(mac, conf->bssid));
|
|
}
|
|
if (priv->ibss_beacon)
|
|
dev_kfree_skb(priv->ibss_beacon);
|
|
|
|
priv->ibss_beacon = conf->beacon;
|
|
}
|
|
|
|
if (iwl4965_is_rfkill(priv))
|
|
goto done;
|
|
|
|
if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
|
|
!is_multicast_ether_addr(conf->bssid)) {
|
|
/* If there is currently a HW scan going on in the background
|
|
* then we need to cancel it else the RXON below will fail. */
|
|
if (iwl4965_scan_cancel_timeout(priv, 100)) {
|
|
IWL_WARNING("Aborted scan still in progress "
|
|
"after 100ms\n");
|
|
IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
|
|
mutex_unlock(&priv->mutex);
|
|
return -EAGAIN;
|
|
}
|
|
memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
|
|
|
|
/* TODO: Audit driver for usage of these members and see
|
|
* if mac80211 deprecates them (priv->bssid looks like it
|
|
* shouldn't be there, but I haven't scanned the IBSS code
|
|
* to verify) - jpk */
|
|
memcpy(priv->bssid, conf->bssid, ETH_ALEN);
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
|
|
iwl4965_config_ap(priv);
|
|
else {
|
|
rc = iwl4965_commit_rxon(priv);
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc)
|
|
iwl4965_rxon_add_station(
|
|
priv, priv->active_rxon.bssid_addr, 1);
|
|
}
|
|
|
|
} else {
|
|
iwl4965_scan_cancel_timeout(priv, 100);
|
|
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
iwl4965_commit_rxon(priv);
|
|
}
|
|
|
|
done:
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (!conf->ssid_len)
|
|
memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
|
|
else
|
|
memcpy(priv->essid, conf->ssid, conf->ssid_len);
|
|
|
|
priv->essid_len = conf->ssid_len;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_configure_filter(struct ieee80211_hw *hw,
|
|
unsigned int changed_flags,
|
|
unsigned int *total_flags,
|
|
int mc_count, struct dev_addr_list *mc_list)
|
|
{
|
|
/*
|
|
* XXX: dummy
|
|
* see also iwl4965_connection_init_rx_config
|
|
*/
|
|
*total_flags = 0;
|
|
}
|
|
|
|
static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_if_init_conf *conf)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (iwl4965_is_ready_rf(priv)) {
|
|
iwl4965_scan_cancel_timeout(priv, 100);
|
|
cancel_delayed_work(&priv->post_associate);
|
|
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
iwl4965_commit_rxon(priv);
|
|
}
|
|
if (priv->vif == conf->vif) {
|
|
priv->vif = NULL;
|
|
memset(priv->bssid, 0, ETH_ALEN);
|
|
memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
|
|
priv->essid_len = 0;
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
|
|
}
|
|
|
|
static void iwl4965_bss_info_changed(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_bss_conf *bss_conf,
|
|
u32 changes)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
|
|
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
|
|
if (bss_conf->use_short_preamble)
|
|
priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
else
|
|
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
|
|
}
|
|
|
|
if (changes & BSS_CHANGED_ERP_CTS_PROT) {
|
|
if (bss_conf->use_cts_prot && (priv->phymode != MODE_IEEE80211A))
|
|
priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
|
|
else
|
|
priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
|
|
}
|
|
|
|
if (changes & BSS_CHANGED_ASSOC) {
|
|
/*
|
|
* TODO:
|
|
* do stuff instead of sniffing assoc resp
|
|
*/
|
|
}
|
|
|
|
if (iwl4965_is_associated(priv))
|
|
iwl4965_send_rxon_assoc(priv);
|
|
}
|
|
|
|
static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
|
|
{
|
|
int rc = 0;
|
|
unsigned long flags;
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
mutex_lock(&priv->mutex);
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
if (!iwl4965_is_ready_rf(priv)) {
|
|
rc = -EIO;
|
|
IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */
|
|
rc = -EIO;
|
|
IWL_ERROR("ERROR: APs don't scan\n");
|
|
goto out_unlock;
|
|
}
|
|
|
|
/* we don't schedule scan within next_scan_jiffies period */
|
|
if (priv->next_scan_jiffies &&
|
|
time_after(priv->next_scan_jiffies, jiffies)) {
|
|
rc = -EAGAIN;
|
|
goto out_unlock;
|
|
}
|
|
/* if we just finished scan ask for delay */
|
|
if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies +
|
|
IWL_DELAY_NEXT_SCAN, jiffies)) {
|
|
rc = -EAGAIN;
|
|
goto out_unlock;
|
|
}
|
|
if (len) {
|
|
IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
|
|
iwl4965_escape_essid(ssid, len), (int)len);
|
|
|
|
priv->one_direct_scan = 1;
|
|
priv->direct_ssid_len = (u8)
|
|
min((u8) len, (u8) IW_ESSID_MAX_SIZE);
|
|
memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
|
|
} else
|
|
priv->one_direct_scan = 0;
|
|
|
|
rc = iwl4965_scan_initiate(priv);
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
|
|
out_unlock:
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
|
|
const u8 *local_addr, const u8 *addr,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
DECLARE_MAC_BUF(mac);
|
|
int rc = 0;
|
|
u8 sta_id;
|
|
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
if (!iwl4965_param_hwcrypto) {
|
|
IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (is_zero_ether_addr(addr))
|
|
/* only support pairwise keys */
|
|
return -EOPNOTSUPP;
|
|
|
|
sta_id = iwl4965_hw_find_station(priv, addr);
|
|
if (sta_id == IWL_INVALID_STATION) {
|
|
IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
|
|
print_mac(mac, addr));
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
iwl4965_scan_cancel_timeout(priv, 100);
|
|
|
|
switch (cmd) {
|
|
case SET_KEY:
|
|
rc = iwl4965_update_sta_key_info(priv, key, sta_id);
|
|
if (!rc) {
|
|
iwl4965_set_rxon_hwcrypto(priv, 1);
|
|
iwl4965_commit_rxon(priv);
|
|
key->hw_key_idx = sta_id;
|
|
IWL_DEBUG_MAC80211("set_key success, using hwcrypto\n");
|
|
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
|
|
}
|
|
break;
|
|
case DISABLE_KEY:
|
|
rc = iwl4965_clear_sta_key_info(priv, sta_id);
|
|
if (!rc) {
|
|
iwl4965_set_rxon_hwcrypto(priv, 0);
|
|
iwl4965_commit_rxon(priv);
|
|
IWL_DEBUG_MAC80211("disable hwcrypto key\n");
|
|
}
|
|
break;
|
|
default:
|
|
rc = -EINVAL;
|
|
}
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, int queue,
|
|
const struct ieee80211_tx_queue_params *params)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
#ifdef CONFIG_IWL4965_QOS
|
|
unsigned long flags;
|
|
int q;
|
|
#endif /* CONFIG_IWL4965_QOS */
|
|
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
if (!iwl4965_is_ready_rf(priv)) {
|
|
IWL_DEBUG_MAC80211("leave - RF not ready\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (queue >= AC_NUM) {
|
|
IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_QOS
|
|
if (!priv->qos_data.qos_enable) {
|
|
priv->qos_data.qos_active = 0;
|
|
IWL_DEBUG_MAC80211("leave - qos not enabled\n");
|
|
return 0;
|
|
}
|
|
q = AC_NUM - 1 - queue;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
|
|
priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
|
|
priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
|
|
priv->qos_data.def_qos_parm.ac[q].edca_txop =
|
|
cpu_to_le16((params->burst_time * 100));
|
|
|
|
priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
|
|
priv->qos_data.qos_active = 1;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
|
|
iwl4965_activate_qos(priv, 1);
|
|
else if (priv->assoc_id && iwl4965_is_associated(priv))
|
|
iwl4965_activate_qos(priv, 0);
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
#endif /*CONFIG_IWL4965_QOS */
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw,
|
|
struct ieee80211_tx_queue_stats *stats)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
int i, avail;
|
|
struct iwl4965_tx_queue *txq;
|
|
struct iwl4965_queue *q;
|
|
unsigned long flags;
|
|
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
if (!iwl4965_is_ready_rf(priv)) {
|
|
IWL_DEBUG_MAC80211("leave - RF not ready\n");
|
|
return -EIO;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
for (i = 0; i < AC_NUM; i++) {
|
|
txq = &priv->txq[i];
|
|
q = &txq->q;
|
|
avail = iwl4965_queue_space(q);
|
|
|
|
stats->data[i].len = q->n_window - avail;
|
|
stats->data[i].limit = q->n_window - q->high_mark;
|
|
stats->data[i].count = q->n_window;
|
|
|
|
}
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_mac_get_stats(struct ieee80211_hw *hw,
|
|
struct ieee80211_low_level_stats *stats)
|
|
{
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64 iwl4965_mac_get_tsf(struct ieee80211_hw *hw)
|
|
{
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
unsigned long flags;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
priv->lq_mngr.lq_ready = 0;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
/* if (priv->lq_mngr.agg_ctrl.granted_ba)
|
|
iwl4965_turn_off_agg(priv, TID_ALL_SPECIFIED);*/
|
|
|
|
memset(&(priv->lq_mngr.agg_ctrl), 0, sizeof(struct iwl4965_agg_control));
|
|
priv->lq_mngr.agg_ctrl.tid_traffic_load_threshold = 10;
|
|
priv->lq_mngr.agg_ctrl.ba_timeout = 5000;
|
|
priv->lq_mngr.agg_ctrl.auto_agg = 1;
|
|
|
|
if (priv->lq_mngr.agg_ctrl.auto_agg)
|
|
priv->lq_mngr.agg_ctrl.requested_ba = TID_ALL_ENABLED;
|
|
#endif /*CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
#ifdef CONFIG_IWL4965_QOS
|
|
iwl4965_reset_qos(priv);
|
|
#endif
|
|
|
|
cancel_delayed_work(&priv->post_associate);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->assoc_id = 0;
|
|
priv->assoc_capability = 0;
|
|
priv->call_post_assoc_from_beacon = 0;
|
|
priv->assoc_station_added = 0;
|
|
|
|
/* new association get rid of ibss beacon skb */
|
|
if (priv->ibss_beacon)
|
|
dev_kfree_skb(priv->ibss_beacon);
|
|
|
|
priv->ibss_beacon = NULL;
|
|
|
|
priv->beacon_int = priv->hw->conf.beacon_int;
|
|
priv->timestamp1 = 0;
|
|
priv->timestamp0 = 0;
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_STA))
|
|
priv->beacon_int = 0;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
if (!iwl4965_is_ready_rf(priv)) {
|
|
IWL_DEBUG_MAC80211("leave - not ready\n");
|
|
mutex_unlock(&priv->mutex);
|
|
return;
|
|
}
|
|
|
|
/* we are restarting association process
|
|
* clear RXON_FILTER_ASSOC_MSK bit
|
|
*/
|
|
if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
|
|
iwl4965_scan_cancel_timeout(priv, 100);
|
|
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
iwl4965_commit_rxon(priv);
|
|
}
|
|
|
|
/* Per mac80211.h: This is only used in IBSS mode... */
|
|
if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
|
|
|
|
IWL_DEBUG_MAC80211("leave - not in IBSS\n");
|
|
mutex_unlock(&priv->mutex);
|
|
return;
|
|
}
|
|
|
|
priv->only_active_channel = 0;
|
|
|
|
iwl4965_set_rate(priv);
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
}
|
|
|
|
static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
|
|
struct ieee80211_tx_control *control)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
unsigned long flags;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
IWL_DEBUG_MAC80211("enter\n");
|
|
|
|
if (!iwl4965_is_ready_rf(priv)) {
|
|
IWL_DEBUG_MAC80211("leave - RF not ready\n");
|
|
mutex_unlock(&priv->mutex);
|
|
return -EIO;
|
|
}
|
|
|
|
if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
|
|
IWL_DEBUG_MAC80211("leave - not IBSS\n");
|
|
mutex_unlock(&priv->mutex);
|
|
return -EIO;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
if (priv->ibss_beacon)
|
|
dev_kfree_skb(priv->ibss_beacon);
|
|
|
|
priv->ibss_beacon = skb;
|
|
|
|
priv->assoc_id = 0;
|
|
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
#ifdef CONFIG_IWL4965_QOS
|
|
iwl4965_reset_qos(priv);
|
|
#endif
|
|
|
|
queue_work(priv->workqueue, &priv->post_associate.work);
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
|
|
static void iwl4965_ht_info_fill(struct ieee80211_conf *conf,
|
|
struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
|
|
struct ieee80211_ht_info *ht_conf = &conf->ht_conf;
|
|
struct ieee80211_ht_bss_info *ht_bss_conf = &conf->ht_bss_conf;
|
|
|
|
IWL_DEBUG_MAC80211("enter: \n");
|
|
|
|
if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) {
|
|
iwl_conf->is_ht = 0;
|
|
return;
|
|
}
|
|
|
|
iwl_conf->is_ht = 1;
|
|
priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
|
|
|
|
if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
|
|
iwl_conf->sgf |= 0x1;
|
|
if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
|
|
iwl_conf->sgf |= 0x2;
|
|
|
|
iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
|
|
iwl_conf->max_amsdu_size =
|
|
!!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
|
|
iwl_conf->supported_chan_width =
|
|
!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH);
|
|
iwl_conf->tx_mimo_ps_mode =
|
|
(u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
|
|
memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16);
|
|
|
|
iwl_conf->control_channel = ht_bss_conf->primary_channel;
|
|
iwl_conf->extension_chan_offset =
|
|
ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET;
|
|
iwl_conf->tx_chan_width =
|
|
!!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH);
|
|
iwl_conf->ht_protection =
|
|
ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION;
|
|
iwl_conf->non_GF_STA_present =
|
|
!!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT);
|
|
|
|
IWL_DEBUG_MAC80211("control channel %d\n",
|
|
iwl_conf->control_channel);
|
|
IWL_DEBUG_MAC80211("leave\n");
|
|
}
|
|
|
|
static int iwl4965_mac_conf_ht(struct ieee80211_hw *hw,
|
|
struct ieee80211_conf *conf)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
|
|
IWL_DEBUG_MAC80211("enter: \n");
|
|
|
|
iwl4965_ht_info_fill(conf, priv);
|
|
iwl4965_set_rxon_chain(priv);
|
|
|
|
if (priv && priv->assoc_id &&
|
|
(priv->iw_mode == IEEE80211_IF_TYPE_STA)) {
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (priv->beacon_int)
|
|
queue_work(priv->workqueue, &priv->post_associate.work);
|
|
else
|
|
priv->call_post_assoc_from_beacon = 1;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
IWL_DEBUG_MAC80211("leave:\n");
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_set_ht_capab(struct ieee80211_hw *hw,
|
|
struct ieee80211_ht_cap *ht_cap,
|
|
u8 use_current_config)
|
|
{
|
|
struct ieee80211_conf *conf = &hw->conf;
|
|
struct ieee80211_hw_mode *mode = conf->mode;
|
|
|
|
if (use_current_config) {
|
|
ht_cap->cap_info = cpu_to_le16(conf->ht_conf.cap);
|
|
memcpy(ht_cap->supp_mcs_set,
|
|
conf->ht_conf.supp_mcs_set, 16);
|
|
} else {
|
|
ht_cap->cap_info = cpu_to_le16(mode->ht_info.cap);
|
|
memcpy(ht_cap->supp_mcs_set,
|
|
mode->ht_info.supp_mcs_set, 16);
|
|
}
|
|
ht_cap->ampdu_params_info =
|
|
(mode->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
|
|
((mode->ht_info.ampdu_density << 2) &
|
|
IEEE80211_HT_CAP_AMPDU_DENSITY);
|
|
}
|
|
|
|
#endif /*CONFIG_IWL4965_HT*/
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* sysfs attributes
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
|
|
/*
|
|
* The following adds a new attribute to the sysfs representation
|
|
* of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
|
|
* used for controlling the debug level.
|
|
*
|
|
* See the level definitions in iwl for details.
|
|
*/
|
|
|
|
static ssize_t show_debug_level(struct device_driver *d, char *buf)
|
|
{
|
|
return sprintf(buf, "0x%08X\n", iwl4965_debug_level);
|
|
}
|
|
static ssize_t store_debug_level(struct device_driver *d,
|
|
const char *buf, size_t count)
|
|
{
|
|
char *p = (char *)buf;
|
|
u32 val;
|
|
|
|
val = simple_strtoul(p, &p, 0);
|
|
if (p == buf)
|
|
printk(KERN_INFO DRV_NAME
|
|
": %s is not in hex or decimal form.\n", buf);
|
|
else
|
|
iwl4965_debug_level = val;
|
|
|
|
return strnlen(buf, count);
|
|
}
|
|
|
|
static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO,
|
|
show_debug_level, store_debug_level);
|
|
|
|
#endif /* CONFIG_IWL4965_DEBUG */
|
|
|
|
static ssize_t show_rf_kill(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
/*
|
|
* 0 - RF kill not enabled
|
|
* 1 - SW based RF kill active (sysfs)
|
|
* 2 - HW based RF kill active
|
|
* 3 - Both HW and SW based RF kill active
|
|
*/
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
int val = (test_bit(STATUS_RF_KILL_SW, &priv->status) ? 0x1 : 0x0) |
|
|
(test_bit(STATUS_RF_KILL_HW, &priv->status) ? 0x2 : 0x0);
|
|
|
|
return sprintf(buf, "%i\n", val);
|
|
}
|
|
|
|
static ssize_t store_rf_kill(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
iwl4965_radio_kill_sw(priv, buf[0] == '1');
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
|
|
|
|
static ssize_t show_temperature(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
|
|
if (!iwl4965_is_alive(priv))
|
|
return -EAGAIN;
|
|
|
|
return sprintf(buf, "%d\n", iwl4965_hw_get_temperature(priv));
|
|
}
|
|
|
|
static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
|
|
|
|
static ssize_t show_rs_window(struct device *d,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = d->driver_data;
|
|
return iwl4965_fill_rs_info(priv->hw, buf, IWL_AP_ID);
|
|
}
|
|
static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL);
|
|
|
|
static ssize_t show_tx_power(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
return sprintf(buf, "%d\n", priv->user_txpower_limit);
|
|
}
|
|
|
|
static ssize_t store_tx_power(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
char *p = (char *)buf;
|
|
u32 val;
|
|
|
|
val = simple_strtoul(p, &p, 10);
|
|
if (p == buf)
|
|
printk(KERN_INFO DRV_NAME
|
|
": %s is not in decimal form.\n", buf);
|
|
else
|
|
iwl4965_hw_reg_set_txpower(priv, val);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
|
|
|
|
static ssize_t show_flags(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
|
|
return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
|
|
}
|
|
|
|
static ssize_t store_flags(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
u32 flags = simple_strtoul(buf, NULL, 0);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
|
|
/* Cancel any currently running scans... */
|
|
if (iwl4965_scan_cancel_timeout(priv, 100))
|
|
IWL_WARNING("Could not cancel scan.\n");
|
|
else {
|
|
IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
|
|
flags);
|
|
priv->staging_rxon.flags = cpu_to_le32(flags);
|
|
iwl4965_commit_rxon(priv);
|
|
}
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
|
|
|
|
static ssize_t show_filter_flags(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
|
|
return sprintf(buf, "0x%04X\n",
|
|
le32_to_cpu(priv->active_rxon.filter_flags));
|
|
}
|
|
|
|
static ssize_t store_filter_flags(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
u32 filter_flags = simple_strtoul(buf, NULL, 0);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
|
|
/* Cancel any currently running scans... */
|
|
if (iwl4965_scan_cancel_timeout(priv, 100))
|
|
IWL_WARNING("Could not cancel scan.\n");
|
|
else {
|
|
IWL_DEBUG_INFO("Committing rxon.filter_flags = "
|
|
"0x%04X\n", filter_flags);
|
|
priv->staging_rxon.filter_flags =
|
|
cpu_to_le32(filter_flags);
|
|
iwl4965_commit_rxon(priv);
|
|
}
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
|
|
store_filter_flags);
|
|
|
|
static ssize_t show_tune(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
|
|
return sprintf(buf, "0x%04X\n",
|
|
(priv->phymode << 8) |
|
|
le16_to_cpu(priv->active_rxon.channel));
|
|
}
|
|
|
|
static void iwl4965_set_flags_for_phymode(struct iwl4965_priv *priv, u8 phymode);
|
|
|
|
static ssize_t store_tune(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
char *p = (char *)buf;
|
|
u16 tune = simple_strtoul(p, &p, 0);
|
|
u8 phymode = (tune >> 8) & 0xff;
|
|
u16 channel = tune & 0xff;
|
|
|
|
IWL_DEBUG_INFO("Tune request to:%d channel:%d\n", phymode, channel);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
if ((le16_to_cpu(priv->staging_rxon.channel) != channel) ||
|
|
(priv->phymode != phymode)) {
|
|
const struct iwl4965_channel_info *ch_info;
|
|
|
|
ch_info = iwl4965_get_channel_info(priv, phymode, channel);
|
|
if (!ch_info) {
|
|
IWL_WARNING("Requested invalid phymode/channel "
|
|
"combination: %d %d\n", phymode, channel);
|
|
mutex_unlock(&priv->mutex);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Cancel any currently running scans... */
|
|
if (iwl4965_scan_cancel_timeout(priv, 100))
|
|
IWL_WARNING("Could not cancel scan.\n");
|
|
else {
|
|
IWL_DEBUG_INFO("Committing phymode and "
|
|
"rxon.channel = %d %d\n",
|
|
phymode, channel);
|
|
|
|
iwl4965_set_rxon_channel(priv, phymode, channel);
|
|
iwl4965_set_flags_for_phymode(priv, phymode);
|
|
|
|
iwl4965_set_rate(priv);
|
|
iwl4965_commit_rxon(priv);
|
|
}
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(tune, S_IWUSR | S_IRUGO, show_tune, store_tune);
|
|
|
|
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
|
|
|
|
static ssize_t show_measurement(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
struct iwl4965_spectrum_notification measure_report;
|
|
u32 size = sizeof(measure_report), len = 0, ofs = 0;
|
|
u8 *data = (u8 *) & measure_report;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (!(priv->measurement_status & MEASUREMENT_READY)) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return 0;
|
|
}
|
|
memcpy(&measure_report, &priv->measure_report, size);
|
|
priv->measurement_status = 0;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
while (size && (PAGE_SIZE - len)) {
|
|
hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
|
|
PAGE_SIZE - len, 1);
|
|
len = strlen(buf);
|
|
if (PAGE_SIZE - len)
|
|
buf[len++] = '\n';
|
|
|
|
ofs += 16;
|
|
size -= min(size, 16U);
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t store_measurement(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
struct ieee80211_measurement_params params = {
|
|
.channel = le16_to_cpu(priv->active_rxon.channel),
|
|
.start_time = cpu_to_le64(priv->last_tsf),
|
|
.duration = cpu_to_le16(1),
|
|
};
|
|
u8 type = IWL_MEASURE_BASIC;
|
|
u8 buffer[32];
|
|
u8 channel;
|
|
|
|
if (count) {
|
|
char *p = buffer;
|
|
strncpy(buffer, buf, min(sizeof(buffer), count));
|
|
channel = simple_strtoul(p, NULL, 0);
|
|
if (channel)
|
|
params.channel = channel;
|
|
|
|
p = buffer;
|
|
while (*p && *p != ' ')
|
|
p++;
|
|
if (*p)
|
|
type = simple_strtoul(p + 1, NULL, 0);
|
|
}
|
|
|
|
IWL_DEBUG_INFO("Invoking measurement of type %d on "
|
|
"channel %d (for '%s')\n", type, params.channel, buf);
|
|
iwl4965_get_measurement(priv, ¶ms, type);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
|
|
show_measurement, store_measurement);
|
|
#endif /* CONFIG_IWL4965_SPECTRUM_MEASUREMENT */
|
|
|
|
static ssize_t store_retry_rate(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
|
|
priv->retry_rate = simple_strtoul(buf, NULL, 0);
|
|
if (priv->retry_rate <= 0)
|
|
priv->retry_rate = 1;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_retry_rate(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
return sprintf(buf, "%d", priv->retry_rate);
|
|
}
|
|
|
|
static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
|
|
store_retry_rate);
|
|
|
|
static ssize_t store_power_level(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
int rc;
|
|
int mode;
|
|
|
|
mode = simple_strtoul(buf, NULL, 0);
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (!iwl4965_is_ready(priv)) {
|
|
rc = -EAGAIN;
|
|
goto out;
|
|
}
|
|
|
|
if ((mode < 1) || (mode > IWL_POWER_LIMIT) || (mode == IWL_POWER_AC))
|
|
mode = IWL_POWER_AC;
|
|
else
|
|
mode |= IWL_POWER_ENABLED;
|
|
|
|
if (mode != priv->power_mode) {
|
|
rc = iwl4965_send_power_mode(priv, IWL_POWER_LEVEL(mode));
|
|
if (rc) {
|
|
IWL_DEBUG_MAC80211("failed setting power mode.\n");
|
|
goto out;
|
|
}
|
|
priv->power_mode = mode;
|
|
}
|
|
|
|
rc = count;
|
|
|
|
out:
|
|
mutex_unlock(&priv->mutex);
|
|
return rc;
|
|
}
|
|
|
|
#define MAX_WX_STRING 80
|
|
|
|
/* Values are in microsecond */
|
|
static const s32 timeout_duration[] = {
|
|
350000,
|
|
250000,
|
|
75000,
|
|
37000,
|
|
25000,
|
|
};
|
|
static const s32 period_duration[] = {
|
|
400000,
|
|
700000,
|
|
1000000,
|
|
1000000,
|
|
1000000
|
|
};
|
|
|
|
static ssize_t show_power_level(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
int level = IWL_POWER_LEVEL(priv->power_mode);
|
|
char *p = buf;
|
|
|
|
p += sprintf(p, "%d ", level);
|
|
switch (level) {
|
|
case IWL_POWER_MODE_CAM:
|
|
case IWL_POWER_AC:
|
|
p += sprintf(p, "(AC)");
|
|
break;
|
|
case IWL_POWER_BATTERY:
|
|
p += sprintf(p, "(BATTERY)");
|
|
break;
|
|
default:
|
|
p += sprintf(p,
|
|
"(Timeout %dms, Period %dms)",
|
|
timeout_duration[level - 1] / 1000,
|
|
period_duration[level - 1] / 1000);
|
|
}
|
|
|
|
if (!(priv->power_mode & IWL_POWER_ENABLED))
|
|
p += sprintf(p, " OFF\n");
|
|
else
|
|
p += sprintf(p, " \n");
|
|
|
|
return (p - buf + 1);
|
|
|
|
}
|
|
|
|
static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
|
|
store_power_level);
|
|
|
|
static ssize_t show_channels(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
int len = 0, i;
|
|
struct ieee80211_channel *channels = NULL;
|
|
const struct ieee80211_hw_mode *hw_mode = NULL;
|
|
int count = 0;
|
|
|
|
if (!iwl4965_is_ready(priv))
|
|
return -EAGAIN;
|
|
|
|
hw_mode = iwl4965_get_hw_mode(priv, MODE_IEEE80211G);
|
|
if (!hw_mode)
|
|
hw_mode = iwl4965_get_hw_mode(priv, MODE_IEEE80211B);
|
|
if (hw_mode) {
|
|
channels = hw_mode->channels;
|
|
count = hw_mode->num_channels;
|
|
}
|
|
|
|
len +=
|
|
sprintf(&buf[len],
|
|
"Displaying %d channels in 2.4GHz band "
|
|
"(802.11bg):\n", count);
|
|
|
|
for (i = 0; i < count; i++)
|
|
len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n",
|
|
channels[i].chan,
|
|
channels[i].power_level,
|
|
channels[i].
|
|
flag & IEEE80211_CHAN_W_RADAR_DETECT ?
|
|
" (IEEE 802.11h required)" : "",
|
|
(!(channels[i].flag & IEEE80211_CHAN_W_IBSS)
|
|
|| (channels[i].
|
|
flag &
|
|
IEEE80211_CHAN_W_RADAR_DETECT)) ? "" :
|
|
", IBSS",
|
|
channels[i].
|
|
flag & IEEE80211_CHAN_W_ACTIVE_SCAN ?
|
|
"active/passive" : "passive only");
|
|
|
|
hw_mode = iwl4965_get_hw_mode(priv, MODE_IEEE80211A);
|
|
if (hw_mode) {
|
|
channels = hw_mode->channels;
|
|
count = hw_mode->num_channels;
|
|
} else {
|
|
channels = NULL;
|
|
count = 0;
|
|
}
|
|
|
|
len += sprintf(&buf[len], "Displaying %d channels in 5.2GHz band "
|
|
"(802.11a):\n", count);
|
|
|
|
for (i = 0; i < count; i++)
|
|
len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n",
|
|
channels[i].chan,
|
|
channels[i].power_level,
|
|
channels[i].
|
|
flag & IEEE80211_CHAN_W_RADAR_DETECT ?
|
|
" (IEEE 802.11h required)" : "",
|
|
(!(channels[i].flag & IEEE80211_CHAN_W_IBSS)
|
|
|| (channels[i].
|
|
flag &
|
|
IEEE80211_CHAN_W_RADAR_DETECT)) ? "" :
|
|
", IBSS",
|
|
channels[i].
|
|
flag & IEEE80211_CHAN_W_ACTIVE_SCAN ?
|
|
"active/passive" : "passive only");
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
|
|
|
|
static ssize_t show_statistics(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
u32 size = sizeof(struct iwl4965_notif_statistics);
|
|
u32 len = 0, ofs = 0;
|
|
u8 *data = (u8 *) & priv->statistics;
|
|
int rc = 0;
|
|
|
|
if (!iwl4965_is_alive(priv))
|
|
return -EAGAIN;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
rc = iwl4965_send_statistics_request(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
|
|
if (rc) {
|
|
len = sprintf(buf,
|
|
"Error sending statistics request: 0x%08X\n", rc);
|
|
return len;
|
|
}
|
|
|
|
while (size && (PAGE_SIZE - len)) {
|
|
hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
|
|
PAGE_SIZE - len, 1);
|
|
len = strlen(buf);
|
|
if (PAGE_SIZE - len)
|
|
buf[len++] = '\n';
|
|
|
|
ofs += 16;
|
|
size -= min(size, 16U);
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
|
|
|
|
static ssize_t show_antenna(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
|
|
if (!iwl4965_is_alive(priv))
|
|
return -EAGAIN;
|
|
|
|
return sprintf(buf, "%d\n", priv->antenna);
|
|
}
|
|
|
|
static ssize_t store_antenna(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int ant;
|
|
struct iwl4965_priv *priv = dev_get_drvdata(d);
|
|
|
|
if (count == 0)
|
|
return 0;
|
|
|
|
if (sscanf(buf, "%1i", &ant) != 1) {
|
|
IWL_DEBUG_INFO("not in hex or decimal form.\n");
|
|
return count;
|
|
}
|
|
|
|
if ((ant >= 0) && (ant <= 2)) {
|
|
IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant);
|
|
priv->antenna = (enum iwl4965_antenna)ant;
|
|
} else
|
|
IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant);
|
|
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
|
|
|
|
static ssize_t show_status(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)d->driver_data;
|
|
if (!iwl4965_is_alive(priv))
|
|
return -EAGAIN;
|
|
return sprintf(buf, "0x%08x\n", (int)priv->status);
|
|
}
|
|
|
|
static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
|
|
|
|
static ssize_t dump_error_log(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
char *p = (char *)buf;
|
|
|
|
if (p[0] == '1')
|
|
iwl4965_dump_nic_error_log((struct iwl4965_priv *)d->driver_data);
|
|
|
|
return strnlen(buf, count);
|
|
}
|
|
|
|
static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
|
|
|
|
static ssize_t dump_event_log(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
char *p = (char *)buf;
|
|
|
|
if (p[0] == '1')
|
|
iwl4965_dump_nic_event_log((struct iwl4965_priv *)d->driver_data);
|
|
|
|
return strnlen(buf, count);
|
|
}
|
|
|
|
static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log);
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* driver setup and teardown
|
|
*
|
|
*****************************************************************************/
|
|
|
|
static void iwl4965_setup_deferred_work(struct iwl4965_priv *priv)
|
|
{
|
|
priv->workqueue = create_workqueue(DRV_NAME);
|
|
|
|
init_waitqueue_head(&priv->wait_command_queue);
|
|
|
|
INIT_WORK(&priv->up, iwl4965_bg_up);
|
|
INIT_WORK(&priv->restart, iwl4965_bg_restart);
|
|
INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish);
|
|
INIT_WORK(&priv->scan_completed, iwl4965_bg_scan_completed);
|
|
INIT_WORK(&priv->request_scan, iwl4965_bg_request_scan);
|
|
INIT_WORK(&priv->abort_scan, iwl4965_bg_abort_scan);
|
|
INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill);
|
|
INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update);
|
|
INIT_DELAYED_WORK(&priv->post_associate, iwl4965_bg_post_associate);
|
|
INIT_DELAYED_WORK(&priv->init_alive_start, iwl4965_bg_init_alive_start);
|
|
INIT_DELAYED_WORK(&priv->alive_start, iwl4965_bg_alive_start);
|
|
INIT_DELAYED_WORK(&priv->scan_check, iwl4965_bg_scan_check);
|
|
|
|
iwl4965_hw_setup_deferred_work(priv);
|
|
|
|
tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
|
|
iwl4965_irq_tasklet, (unsigned long)priv);
|
|
}
|
|
|
|
static void iwl4965_cancel_deferred_work(struct iwl4965_priv *priv)
|
|
{
|
|
iwl4965_hw_cancel_deferred_work(priv);
|
|
|
|
cancel_delayed_work_sync(&priv->init_alive_start);
|
|
cancel_delayed_work(&priv->scan_check);
|
|
cancel_delayed_work(&priv->alive_start);
|
|
cancel_delayed_work(&priv->post_associate);
|
|
cancel_work_sync(&priv->beacon_update);
|
|
}
|
|
|
|
static struct attribute *iwl4965_sysfs_entries[] = {
|
|
&dev_attr_antenna.attr,
|
|
&dev_attr_channels.attr,
|
|
&dev_attr_dump_errors.attr,
|
|
&dev_attr_dump_events.attr,
|
|
&dev_attr_flags.attr,
|
|
&dev_attr_filter_flags.attr,
|
|
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
|
|
&dev_attr_measurement.attr,
|
|
#endif
|
|
&dev_attr_power_level.attr,
|
|
&dev_attr_retry_rate.attr,
|
|
&dev_attr_rf_kill.attr,
|
|
&dev_attr_rs_window.attr,
|
|
&dev_attr_statistics.attr,
|
|
&dev_attr_status.attr,
|
|
&dev_attr_temperature.attr,
|
|
&dev_attr_tune.attr,
|
|
&dev_attr_tx_power.attr,
|
|
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group iwl4965_attribute_group = {
|
|
.name = NULL, /* put in device directory */
|
|
.attrs = iwl4965_sysfs_entries,
|
|
};
|
|
|
|
static struct ieee80211_ops iwl4965_hw_ops = {
|
|
.tx = iwl4965_mac_tx,
|
|
.start = iwl4965_mac_start,
|
|
.stop = iwl4965_mac_stop,
|
|
.add_interface = iwl4965_mac_add_interface,
|
|
.remove_interface = iwl4965_mac_remove_interface,
|
|
.config = iwl4965_mac_config,
|
|
.config_interface = iwl4965_mac_config_interface,
|
|
.configure_filter = iwl4965_configure_filter,
|
|
.set_key = iwl4965_mac_set_key,
|
|
.get_stats = iwl4965_mac_get_stats,
|
|
.get_tx_stats = iwl4965_mac_get_tx_stats,
|
|
.conf_tx = iwl4965_mac_conf_tx,
|
|
.get_tsf = iwl4965_mac_get_tsf,
|
|
.reset_tsf = iwl4965_mac_reset_tsf,
|
|
.beacon_update = iwl4965_mac_beacon_update,
|
|
.bss_info_changed = iwl4965_bss_info_changed,
|
|
#ifdef CONFIG_IWL4965_HT
|
|
.conf_ht = iwl4965_mac_conf_ht,
|
|
.ampdu_action = iwl4965_mac_ampdu_action,
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
.ht_tx_agg_start = iwl4965_mac_ht_tx_agg_start,
|
|
.ht_tx_agg_stop = iwl4965_mac_ht_tx_agg_stop,
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
.hw_scan = iwl4965_mac_hw_scan
|
|
};
|
|
|
|
static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
int err = 0;
|
|
struct iwl4965_priv *priv;
|
|
struct ieee80211_hw *hw;
|
|
int i;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
/* Disabling hardware scan means that mac80211 will perform scans
|
|
* "the hard way", rather than using device's scan. */
|
|
if (iwl4965_param_disable_hw_scan) {
|
|
IWL_DEBUG_INFO("Disabling hw_scan\n");
|
|
iwl4965_hw_ops.hw_scan = NULL;
|
|
}
|
|
|
|
if ((iwl4965_param_queues_num > IWL_MAX_NUM_QUEUES) ||
|
|
(iwl4965_param_queues_num < IWL_MIN_NUM_QUEUES)) {
|
|
IWL_ERROR("invalid queues_num, should be between %d and %d\n",
|
|
IWL_MIN_NUM_QUEUES, IWL_MAX_NUM_QUEUES);
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* mac80211 allocates memory for this device instance, including
|
|
* space for this driver's private structure */
|
|
hw = ieee80211_alloc_hw(sizeof(struct iwl4965_priv), &iwl4965_hw_ops);
|
|
if (hw == NULL) {
|
|
IWL_ERROR("Can not allocate network device\n");
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
SET_IEEE80211_DEV(hw, &pdev->dev);
|
|
|
|
hw->rate_control_algorithm = "iwl-4965-rs";
|
|
|
|
IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
|
|
priv = hw->priv;
|
|
priv->hw = hw;
|
|
|
|
priv->pci_dev = pdev;
|
|
priv->antenna = (enum iwl4965_antenna)iwl4965_param_antenna;
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
iwl4965_debug_level = iwl4965_param_debug;
|
|
atomic_set(&priv->restrict_refcnt, 0);
|
|
#endif
|
|
priv->retry_rate = 1;
|
|
|
|
priv->ibss_beacon = NULL;
|
|
|
|
/* Tell mac80211 and its clients (e.g. Wireless Extensions)
|
|
* the range of signal quality values that we'll provide.
|
|
* Negative values for level/noise indicate that we'll provide dBm.
|
|
* For WE, at least, non-0 values here *enable* display of values
|
|
* in app (iwconfig). */
|
|
hw->max_rssi = -20; /* signal level, negative indicates dBm */
|
|
hw->max_noise = -20; /* noise level, negative indicates dBm */
|
|
hw->max_signal = 100; /* link quality indication (%) */
|
|
|
|
/* Tell mac80211 our Tx characteristics */
|
|
hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
|
|
|
|
/* Default value; 4 EDCA QOS priorities */
|
|
hw->queues = 4;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
/* Enhanced value; more queues, to support 11n aggregation */
|
|
hw->queues = 16;
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
spin_lock_init(&priv->lock);
|
|
spin_lock_init(&priv->power_data.lock);
|
|
spin_lock_init(&priv->sta_lock);
|
|
spin_lock_init(&priv->hcmd_lock);
|
|
spin_lock_init(&priv->lq_mngr.lock);
|
|
|
|
for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++)
|
|
INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
|
|
|
|
INIT_LIST_HEAD(&priv->free_frames);
|
|
|
|
mutex_init(&priv->mutex);
|
|
if (pci_enable_device(pdev)) {
|
|
err = -ENODEV;
|
|
goto out_ieee80211_free_hw;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* Clear the driver's (not device's) station table */
|
|
iwl4965_clear_stations_table(priv);
|
|
|
|
priv->data_retry_limit = -1;
|
|
priv->ieee_channels = NULL;
|
|
priv->ieee_rates = NULL;
|
|
priv->phymode = -1;
|
|
|
|
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (!err)
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (err) {
|
|
printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n");
|
|
goto out_pci_disable_device;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, priv);
|
|
err = pci_request_regions(pdev, DRV_NAME);
|
|
if (err)
|
|
goto out_pci_disable_device;
|
|
|
|
/* We disable the RETRY_TIMEOUT register (0x41) to keep
|
|
* PCI Tx retries from interfering with C3 CPU state */
|
|
pci_write_config_byte(pdev, 0x41, 0x00);
|
|
|
|
priv->hw_base = pci_iomap(pdev, 0, 0);
|
|
if (!priv->hw_base) {
|
|
err = -ENODEV;
|
|
goto out_pci_release_regions;
|
|
}
|
|
|
|
IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
|
|
(unsigned long long) pci_resource_len(pdev, 0));
|
|
IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
|
|
|
|
/* Initialize module parameter values here */
|
|
|
|
/* Disable radio (SW RF KILL) via parameter when loading driver */
|
|
if (iwl4965_param_disable) {
|
|
set_bit(STATUS_RF_KILL_SW, &priv->status);
|
|
IWL_DEBUG_INFO("Radio disabled.\n");
|
|
}
|
|
|
|
priv->iw_mode = IEEE80211_IF_TYPE_STA;
|
|
|
|
priv->ps_mode = 0;
|
|
priv->use_ant_b_for_management_frame = 1; /* start with ant B */
|
|
priv->valid_antenna = 0x7; /* assume all 3 connected */
|
|
priv->ps_mode = IWL_MIMO_PS_NONE;
|
|
|
|
/* Choose which receivers/antennas to use */
|
|
iwl4965_set_rxon_chain(priv);
|
|
|
|
printk(KERN_INFO DRV_NAME
|
|
": Detected Intel Wireless WiFi Link 4965AGN\n");
|
|
|
|
/* Device-specific setup */
|
|
if (iwl4965_hw_set_hw_setting(priv)) {
|
|
IWL_ERROR("failed to set hw settings\n");
|
|
goto out_iounmap;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_QOS
|
|
if (iwl4965_param_qos_enable)
|
|
priv->qos_data.qos_enable = 1;
|
|
|
|
iwl4965_reset_qos(priv);
|
|
|
|
priv->qos_data.qos_active = 0;
|
|
priv->qos_data.qos_cap.val = 0;
|
|
#endif /* CONFIG_IWL4965_QOS */
|
|
|
|
iwl4965_set_rxon_channel(priv, MODE_IEEE80211G, 6);
|
|
iwl4965_setup_deferred_work(priv);
|
|
iwl4965_setup_rx_handlers(priv);
|
|
|
|
priv->rates_mask = IWL_RATES_MASK;
|
|
/* If power management is turned on, default to AC mode */
|
|
priv->power_mode = IWL_POWER_AC;
|
|
priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
|
|
|
|
iwl4965_disable_interrupts(priv);
|
|
|
|
err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group);
|
|
if (err) {
|
|
IWL_ERROR("failed to create sysfs device attributes\n");
|
|
goto out_release_irq;
|
|
}
|
|
|
|
/* nic init */
|
|
iwl4965_set_bit(priv, CSR_GIO_CHICKEN_BITS,
|
|
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
|
|
|
|
iwl4965_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
|
|
err = iwl4965_poll_bit(priv, CSR_GP_CNTRL,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
|
|
if (err < 0) {
|
|
IWL_DEBUG_INFO("Failed to init the card\n");
|
|
goto out_remove_sysfs;
|
|
}
|
|
/* Read the EEPROM */
|
|
err = iwl4965_eeprom_init(priv);
|
|
if (err) {
|
|
IWL_ERROR("Unable to init EEPROM\n");
|
|
goto out_remove_sysfs;
|
|
}
|
|
/* MAC Address location in EEPROM same for 3945/4965 */
|
|
get_eeprom_mac(priv, priv->mac_addr);
|
|
IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr));
|
|
SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
|
|
|
|
err = iwl4965_init_channel_map(priv);
|
|
if (err) {
|
|
IWL_ERROR("initializing regulatory failed: %d\n", err);
|
|
goto out_remove_sysfs;
|
|
}
|
|
|
|
err = iwl4965_init_geos(priv);
|
|
if (err) {
|
|
IWL_ERROR("initializing geos failed: %d\n", err);
|
|
goto out_free_channel_map;
|
|
}
|
|
iwl4965_reset_channel_flag(priv);
|
|
|
|
iwl4965_rate_control_register(priv->hw);
|
|
err = ieee80211_register_hw(priv->hw);
|
|
if (err) {
|
|
IWL_ERROR("Failed to register network device (error %d)\n", err);
|
|
goto out_free_geos;
|
|
}
|
|
|
|
priv->hw->conf.beacon_int = 100;
|
|
priv->mac80211_registered = 1;
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
return 0;
|
|
|
|
out_free_geos:
|
|
iwl4965_free_geos(priv);
|
|
out_free_channel_map:
|
|
iwl4965_free_channel_map(priv);
|
|
out_remove_sysfs:
|
|
sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
|
|
|
|
out_release_irq:
|
|
destroy_workqueue(priv->workqueue);
|
|
priv->workqueue = NULL;
|
|
iwl4965_unset_hw_setting(priv);
|
|
|
|
out_iounmap:
|
|
pci_iounmap(pdev, priv->hw_base);
|
|
out_pci_release_regions:
|
|
pci_release_regions(pdev);
|
|
out_pci_disable_device:
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
out_ieee80211_free_hw:
|
|
ieee80211_free_hw(priv->hw);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void iwl4965_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct iwl4965_priv *priv = pci_get_drvdata(pdev);
|
|
struct list_head *p, *q;
|
|
int i;
|
|
|
|
if (!priv)
|
|
return;
|
|
|
|
IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
|
|
|
|
set_bit(STATUS_EXIT_PENDING, &priv->status);
|
|
|
|
iwl4965_down(priv);
|
|
|
|
/* Free MAC hash list for ADHOC */
|
|
for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) {
|
|
list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) {
|
|
list_del(p);
|
|
kfree(list_entry(p, struct iwl4965_ibss_seq, list));
|
|
}
|
|
}
|
|
|
|
sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
|
|
|
|
iwl4965_dealloc_ucode_pci(priv);
|
|
|
|
if (priv->rxq.bd)
|
|
iwl4965_rx_queue_free(priv, &priv->rxq);
|
|
iwl4965_hw_txq_ctx_free(priv);
|
|
|
|
iwl4965_unset_hw_setting(priv);
|
|
iwl4965_clear_stations_table(priv);
|
|
|
|
if (priv->mac80211_registered) {
|
|
ieee80211_unregister_hw(priv->hw);
|
|
iwl4965_rate_control_unregister(priv->hw);
|
|
}
|
|
|
|
/*netif_stop_queue(dev); */
|
|
flush_workqueue(priv->workqueue);
|
|
|
|
/* ieee80211_unregister_hw calls iwl4965_mac_stop, which flushes
|
|
* priv->workqueue... so we can't take down the workqueue
|
|
* until now... */
|
|
destroy_workqueue(priv->workqueue);
|
|
priv->workqueue = NULL;
|
|
|
|
pci_iounmap(pdev, priv->hw_base);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
iwl4965_free_channel_map(priv);
|
|
iwl4965_free_geos(priv);
|
|
|
|
if (priv->ibss_beacon)
|
|
dev_kfree_skb(priv->ibss_beacon);
|
|
|
|
ieee80211_free_hw(priv->hw);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct iwl4965_priv *priv = pci_get_drvdata(pdev);
|
|
|
|
if (priv->is_open) {
|
|
set_bit(STATUS_IN_SUSPEND, &priv->status);
|
|
iwl4965_mac_stop(priv->hw);
|
|
priv->is_open = 1;
|
|
}
|
|
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
struct iwl4965_priv *priv = pci_get_drvdata(pdev);
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
|
|
if (priv->is_open)
|
|
iwl4965_mac_start(priv->hw);
|
|
|
|
clear_bit(STATUS_IN_SUSPEND, &priv->status);
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* driver and module entry point
|
|
*
|
|
*****************************************************************************/
|
|
|
|
static struct pci_driver iwl4965_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = iwl4965_hw_card_ids,
|
|
.probe = iwl4965_pci_probe,
|
|
.remove = __devexit_p(iwl4965_pci_remove),
|
|
#ifdef CONFIG_PM
|
|
.suspend = iwl4965_pci_suspend,
|
|
.resume = iwl4965_pci_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init iwl4965_init(void)
|
|
{
|
|
|
|
int ret;
|
|
printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
|
|
printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
|
|
ret = pci_register_driver(&iwl4965_driver);
|
|
if (ret) {
|
|
IWL_ERROR("Unable to initialize PCI module\n");
|
|
return ret;
|
|
}
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
ret = driver_create_file(&iwl4965_driver.driver, &driver_attr_debug_level);
|
|
if (ret) {
|
|
IWL_ERROR("Unable to create driver sysfs file\n");
|
|
pci_unregister_driver(&iwl4965_driver);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit iwl4965_exit(void)
|
|
{
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
driver_remove_file(&iwl4965_driver.driver, &driver_attr_debug_level);
|
|
#endif
|
|
pci_unregister_driver(&iwl4965_driver);
|
|
}
|
|
|
|
module_param_named(antenna, iwl4965_param_antenna, int, 0444);
|
|
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
|
|
module_param_named(disable, iwl4965_param_disable, int, 0444);
|
|
MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
|
|
module_param_named(hwcrypto, iwl4965_param_hwcrypto, int, 0444);
|
|
MODULE_PARM_DESC(hwcrypto,
|
|
"using hardware crypto engine (default 0 [software])\n");
|
|
module_param_named(debug, iwl4965_param_debug, int, 0444);
|
|
MODULE_PARM_DESC(debug, "debug output mask");
|
|
module_param_named(disable_hw_scan, iwl4965_param_disable_hw_scan, int, 0444);
|
|
MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
|
|
|
|
module_param_named(queues_num, iwl4965_param_queues_num, int, 0444);
|
|
MODULE_PARM_DESC(queues_num, "number of hw queues.");
|
|
|
|
/* QoS */
|
|
module_param_named(qos_enable, iwl4965_param_qos_enable, int, 0444);
|
|
MODULE_PARM_DESC(qos_enable, "enable all QoS functionality");
|
|
module_param_named(amsdu_size_8K, iwl4965_param_amsdu_size_8K, int, 0444);
|
|
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
|
|
|
|
module_exit(iwl4965_exit);
|
|
module_init(iwl4965_init);
|