6c1b445c22
This patch, which has as478b as a prerequisite, enables the uhci-hcd driver to take advantage of root-hub IRQs rather than polling during the time it is suspended. (Unfortunately the hardware doesn't support port-change interrupts while the controller is running.) It also turns off the driver's private timer while the controller is suspended, as it isn't needed then. The combined elimination of polling interrupts and timer interrupts ought to be enough to allow some systems to save a noticeable amount of power while they are otherwise idle. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
375 lines
9.7 KiB
C
375 lines
9.7 KiB
C
/*
|
|
* Universal Host Controller Interface driver for USB.
|
|
*
|
|
* Maintainer: Alan Stern <stern@rowland.harvard.edu>
|
|
*
|
|
* (C) Copyright 1999 Linus Torvalds
|
|
* (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
|
|
* (C) Copyright 1999 Randy Dunlap
|
|
* (C) Copyright 1999 Georg Acher, acher@in.tum.de
|
|
* (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
|
|
* (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
|
|
* (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
|
|
*/
|
|
|
|
static __u8 root_hub_hub_des[] =
|
|
{
|
|
0x09, /* __u8 bLength; */
|
|
0x29, /* __u8 bDescriptorType; Hub-descriptor */
|
|
0x02, /* __u8 bNbrPorts; */
|
|
0x0a, /* __u16 wHubCharacteristics; */
|
|
0x00, /* (per-port OC, no power switching) */
|
|
0x01, /* __u8 bPwrOn2pwrGood; 2ms */
|
|
0x00, /* __u8 bHubContrCurrent; 0 mA */
|
|
0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
|
|
0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
|
|
};
|
|
|
|
#define UHCI_RH_MAXCHILD 7
|
|
|
|
/* must write as zeroes */
|
|
#define WZ_BITS (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
|
|
|
|
/* status change bits: nonzero writes will clear */
|
|
#define RWC_BITS (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
|
|
|
|
/* A port that either is connected or has a changed-bit set will prevent
|
|
* us from AUTO_STOPPING.
|
|
*/
|
|
static int any_ports_active(struct uhci_hcd *uhci)
|
|
{
|
|
int port;
|
|
|
|
for (port = 0; port < uhci->rh_numports; ++port) {
|
|
if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) &
|
|
(USBPORTSC_CCS | RWC_BITS)) ||
|
|
test_bit(port, &uhci->port_c_suspend))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
|
|
{
|
|
int port;
|
|
|
|
*buf = 0;
|
|
for (port = 0; port < uhci->rh_numports; ++port) {
|
|
if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
|
|
test_bit(port, &uhci->port_c_suspend))
|
|
*buf |= (1 << (port + 1));
|
|
}
|
|
return !!*buf;
|
|
}
|
|
|
|
#define OK(x) len = (x); break
|
|
|
|
#define CLR_RH_PORTSTAT(x) \
|
|
status = inw(port_addr); \
|
|
status &= ~(RWC_BITS|WZ_BITS); \
|
|
status &= ~(x); \
|
|
status |= RWC_BITS & (x); \
|
|
outw(status, port_addr)
|
|
|
|
#define SET_RH_PORTSTAT(x) \
|
|
status = inw(port_addr); \
|
|
status |= (x); \
|
|
status &= ~(RWC_BITS|WZ_BITS); \
|
|
outw(status, port_addr)
|
|
|
|
/* UHCI controllers don't automatically stop resume signalling after 20 msec,
|
|
* so we have to poll and check timeouts in order to take care of it.
|
|
*/
|
|
static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
|
|
unsigned long port_addr)
|
|
{
|
|
int status;
|
|
|
|
if (test_bit(port, &uhci->suspended_ports)) {
|
|
CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
|
|
clear_bit(port, &uhci->suspended_ports);
|
|
clear_bit(port, &uhci->resuming_ports);
|
|
set_bit(port, &uhci->port_c_suspend);
|
|
|
|
/* The controller won't actually turn off the RD bit until
|
|
* it has had a chance to send a low-speed EOP sequence,
|
|
* which takes 3 bit times (= 2 microseconds). We'll delay
|
|
* slightly longer for good luck. */
|
|
udelay(4);
|
|
}
|
|
}
|
|
|
|
static void uhci_check_ports(struct uhci_hcd *uhci)
|
|
{
|
|
unsigned int port;
|
|
unsigned long port_addr;
|
|
int status;
|
|
|
|
for (port = 0; port < uhci->rh_numports; ++port) {
|
|
port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
|
|
status = inw(port_addr);
|
|
if (unlikely(status & USBPORTSC_PR)) {
|
|
if (time_after_eq(jiffies, uhci->ports_timeout)) {
|
|
CLR_RH_PORTSTAT(USBPORTSC_PR);
|
|
udelay(10);
|
|
|
|
/* If the port was enabled before, turning
|
|
* reset on caused a port enable change.
|
|
* Turning reset off causes a port connect
|
|
* status change. Clear these changes. */
|
|
CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
|
|
SET_RH_PORTSTAT(USBPORTSC_PE);
|
|
}
|
|
}
|
|
if (unlikely(status & USBPORTSC_RD)) {
|
|
if (!test_bit(port, &uhci->resuming_ports)) {
|
|
|
|
/* Port received a wakeup request */
|
|
set_bit(port, &uhci->resuming_ports);
|
|
uhci->ports_timeout = jiffies +
|
|
msecs_to_jiffies(20);
|
|
|
|
/* Make sure we see the port again
|
|
* after the resuming period is over. */
|
|
mod_timer(&uhci_to_hcd(uhci)->rh_timer,
|
|
uhci->ports_timeout);
|
|
} else if (time_after_eq(jiffies,
|
|
uhci->ports_timeout)) {
|
|
uhci_finish_suspend(uhci, port, port_addr);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
|
|
{
|
|
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
|
|
unsigned long flags;
|
|
int status;
|
|
|
|
spin_lock_irqsave(&uhci->lock, flags);
|
|
if (uhci->hc_inaccessible) {
|
|
status = 0;
|
|
goto done;
|
|
}
|
|
|
|
uhci_check_ports(uhci);
|
|
status = get_hub_status_data(uhci, buf);
|
|
|
|
switch (uhci->rh_state) {
|
|
case UHCI_RH_SUSPENDING:
|
|
case UHCI_RH_SUSPENDED:
|
|
/* if port change, ask to be resumed */
|
|
if (status)
|
|
usb_hcd_resume_root_hub(hcd);
|
|
break;
|
|
|
|
case UHCI_RH_AUTO_STOPPED:
|
|
/* if port change, auto start */
|
|
if (status)
|
|
wakeup_rh(uhci);
|
|
break;
|
|
|
|
case UHCI_RH_RUNNING:
|
|
/* are any devices attached? */
|
|
if (!any_ports_active(uhci)) {
|
|
uhci->rh_state = UHCI_RH_RUNNING_NODEVS;
|
|
uhci->auto_stop_time = jiffies + HZ;
|
|
}
|
|
break;
|
|
|
|
case UHCI_RH_RUNNING_NODEVS:
|
|
/* auto-stop if nothing connected for 1 second */
|
|
if (any_ports_active(uhci))
|
|
uhci->rh_state = UHCI_RH_RUNNING;
|
|
else if (time_after_eq(jiffies, uhci->auto_stop_time))
|
|
suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
done:
|
|
spin_unlock_irqrestore(&uhci->lock, flags);
|
|
return status;
|
|
}
|
|
|
|
/* size of returned buffer is part of USB spec */
|
|
static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
|
|
u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
|
|
int status, lstatus, retval = 0, len = 0;
|
|
unsigned int port = wIndex - 1;
|
|
unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
|
|
u16 wPortChange, wPortStatus;
|
|
unsigned long flags;
|
|
|
|
if (uhci->hc_inaccessible)
|
|
return -ETIMEDOUT;
|
|
|
|
spin_lock_irqsave(&uhci->lock, flags);
|
|
switch (typeReq) {
|
|
|
|
case GetHubStatus:
|
|
*(__le32 *)buf = cpu_to_le32(0);
|
|
OK(4); /* hub power */
|
|
case GetPortStatus:
|
|
if (port >= uhci->rh_numports)
|
|
goto err;
|
|
|
|
uhci_check_ports(uhci);
|
|
status = inw(port_addr);
|
|
|
|
/* Intel controllers report the OverCurrent bit active on.
|
|
* VIA controllers report it active off, so we'll adjust the
|
|
* bit value. (It's not standardized in the UHCI spec.)
|
|
*/
|
|
if (to_pci_dev(hcd->self.controller)->vendor ==
|
|
PCI_VENDOR_ID_VIA)
|
|
status ^= USBPORTSC_OC;
|
|
|
|
/* UHCI doesn't support C_RESET (always false) */
|
|
wPortChange = lstatus = 0;
|
|
if (status & USBPORTSC_CSC)
|
|
wPortChange |= USB_PORT_STAT_C_CONNECTION;
|
|
if (status & USBPORTSC_PEC)
|
|
wPortChange |= USB_PORT_STAT_C_ENABLE;
|
|
if (status & USBPORTSC_OCC)
|
|
wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
|
|
|
|
if (test_bit(port, &uhci->port_c_suspend)) {
|
|
wPortChange |= USB_PORT_STAT_C_SUSPEND;
|
|
lstatus |= 1;
|
|
}
|
|
if (test_bit(port, &uhci->suspended_ports))
|
|
lstatus |= 2;
|
|
if (test_bit(port, &uhci->resuming_ports))
|
|
lstatus |= 4;
|
|
|
|
/* UHCI has no power switching (always on) */
|
|
wPortStatus = USB_PORT_STAT_POWER;
|
|
if (status & USBPORTSC_CCS)
|
|
wPortStatus |= USB_PORT_STAT_CONNECTION;
|
|
if (status & USBPORTSC_PE) {
|
|
wPortStatus |= USB_PORT_STAT_ENABLE;
|
|
if (status & (USBPORTSC_SUSP | USBPORTSC_RD))
|
|
wPortStatus |= USB_PORT_STAT_SUSPEND;
|
|
}
|
|
if (status & USBPORTSC_OC)
|
|
wPortStatus |= USB_PORT_STAT_OVERCURRENT;
|
|
if (status & USBPORTSC_PR)
|
|
wPortStatus |= USB_PORT_STAT_RESET;
|
|
if (status & USBPORTSC_LSDA)
|
|
wPortStatus |= USB_PORT_STAT_LOW_SPEED;
|
|
|
|
if (wPortChange)
|
|
dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
|
|
wIndex, status, lstatus);
|
|
|
|
*(__le16 *)buf = cpu_to_le16(wPortStatus);
|
|
*(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
|
|
OK(4);
|
|
case SetHubFeature: /* We don't implement these */
|
|
case ClearHubFeature:
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
case C_HUB_LOCAL_POWER:
|
|
OK(0);
|
|
default:
|
|
goto err;
|
|
}
|
|
break;
|
|
case SetPortFeature:
|
|
if (port >= uhci->rh_numports)
|
|
goto err;
|
|
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
set_bit(port, &uhci->suspended_ports);
|
|
SET_RH_PORTSTAT(USBPORTSC_SUSP);
|
|
OK(0);
|
|
case USB_PORT_FEAT_RESET:
|
|
SET_RH_PORTSTAT(USBPORTSC_PR);
|
|
|
|
/* Reset terminates Resume signalling */
|
|
uhci_finish_suspend(uhci, port, port_addr);
|
|
|
|
/* USB v2.0 7.1.7.5 */
|
|
uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
|
|
OK(0);
|
|
case USB_PORT_FEAT_POWER:
|
|
/* UHCI has no power switching */
|
|
OK(0);
|
|
default:
|
|
goto err;
|
|
}
|
|
break;
|
|
case ClearPortFeature:
|
|
if (port >= uhci->rh_numports)
|
|
goto err;
|
|
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_ENABLE:
|
|
CLR_RH_PORTSTAT(USBPORTSC_PE);
|
|
|
|
/* Disable terminates Resume signalling */
|
|
uhci_finish_suspend(uhci, port, port_addr);
|
|
OK(0);
|
|
case USB_PORT_FEAT_C_ENABLE:
|
|
CLR_RH_PORTSTAT(USBPORTSC_PEC);
|
|
OK(0);
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
if (test_bit(port, &uhci->suspended_ports) &&
|
|
!test_and_set_bit(port,
|
|
&uhci->resuming_ports)) {
|
|
SET_RH_PORTSTAT(USBPORTSC_RD);
|
|
|
|
/* The controller won't allow RD to be set
|
|
* if the port is disabled. When this happens
|
|
* just skip the Resume signalling.
|
|
*/
|
|
if (!(inw(port_addr) & USBPORTSC_RD))
|
|
uhci_finish_suspend(uhci, port,
|
|
port_addr);
|
|
else
|
|
/* USB v2.0 7.1.7.7 */
|
|
uhci->ports_timeout = jiffies +
|
|
msecs_to_jiffies(20);
|
|
}
|
|
OK(0);
|
|
case USB_PORT_FEAT_C_SUSPEND:
|
|
clear_bit(port, &uhci->port_c_suspend);
|
|
OK(0);
|
|
case USB_PORT_FEAT_POWER:
|
|
/* UHCI has no power switching */
|
|
goto err;
|
|
case USB_PORT_FEAT_C_CONNECTION:
|
|
CLR_RH_PORTSTAT(USBPORTSC_CSC);
|
|
OK(0);
|
|
case USB_PORT_FEAT_C_OVER_CURRENT:
|
|
CLR_RH_PORTSTAT(USBPORTSC_OCC);
|
|
OK(0);
|
|
case USB_PORT_FEAT_C_RESET:
|
|
/* this driver won't report these */
|
|
OK(0);
|
|
default:
|
|
goto err;
|
|
}
|
|
break;
|
|
case GetHubDescriptor:
|
|
len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
|
|
memcpy(buf, root_hub_hub_des, len);
|
|
if (len > 2)
|
|
buf[2] = uhci->rh_numports;
|
|
OK(len);
|
|
default:
|
|
err:
|
|
retval = -EPIPE;
|
|
}
|
|
spin_unlock_irqrestore(&uhci->lock, flags);
|
|
|
|
return retval;
|
|
}
|