android_kernel_xiaomi_sm8350/arch/mips/cavium-octeon/dma-octeon.c
David Daney 541247f4d2 MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/973/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27 12:53:40 +01:00

340 lines
10 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com>
* Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org>
* Copyright (C) 2005 Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
* swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
* IP32 changes by Ilya.
* Cavium Networks: Create new dma setup for Cavium Networks Octeon based on
* the kernels original.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/cache.h>
#include <linux/io.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-npi-defs.h>
#include <asm/octeon/cvmx-pci-defs.h>
#include <dma-coherence.h>
#ifdef CONFIG_PCI
#include <asm/octeon/pci-octeon.h>
#endif
#define BAR2_PCI_ADDRESS 0x8000000000ul
struct bar1_index_state {
int16_t ref_count; /* Number of PCI mappings using this index */
uint16_t address_bits; /* Upper bits of physical address. This is
shifted 22 bits */
};
#ifdef CONFIG_PCI
static DEFINE_RAW_SPINLOCK(bar1_lock);
static struct bar1_index_state bar1_state[32];
#endif
dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
{
#ifndef CONFIG_PCI
/* Without PCI/PCIe this function can be called for Octeon internal
devices such as USB. These devices all support 64bit addressing */
mb();
return virt_to_phys(ptr);
#else
unsigned long flags;
uint64_t dma_mask;
int64_t start_index;
dma_addr_t result = -1;
uint64_t physical = virt_to_phys(ptr);
int64_t index;
mb();
/*
* Use the DMA masks to determine the allowed memory
* region. For us it doesn't limit the actual memory, just the
* address visible over PCI. Devices with limits need to use
* lower indexed Bar1 entries.
*/
if (dev) {
dma_mask = dev->coherent_dma_mask;
if (dev->dma_mask)
dma_mask = *dev->dma_mask;
} else {
dma_mask = 0xfffffffful;
}
/*
* Platform devices, such as the internal USB, skip all
* translation and use Octeon physical addresses directly.
*/
if (!dev || dev->bus == &platform_bus_type)
return physical;
switch (octeon_dma_bar_type) {
case OCTEON_DMA_BAR_TYPE_PCIE:
if (unlikely(physical < (16ul << 10)))
panic("dma_map_single: Not allowed to map first 16KB."
" It interferes with BAR0 special area\n");
else if ((physical + size >= (256ul << 20)) &&
(physical < (512ul << 20)))
panic("dma_map_single: Not allowed to map bootbus\n");
else if ((physical + size >= 0x400000000ull) &&
physical < 0x410000000ull)
panic("dma_map_single: "
"Attempt to map illegal memory address 0x%llx\n",
physical);
else if (physical >= 0x420000000ull)
panic("dma_map_single: "
"Attempt to map illegal memory address 0x%llx\n",
physical);
else if ((physical + size >=
(4ull<<30) - (OCTEON_PCI_BAR1_HOLE_SIZE<<20))
&& physical < (4ull<<30))
pr_warning("dma_map_single: Warning: "
"Mapping memory address that might "
"conflict with devices 0x%llx-0x%llx\n",
physical, physical+size-1);
/* The 2nd 256MB is mapped at 256<<20 instead of 0x410000000 */
if ((physical >= 0x410000000ull) && physical < 0x420000000ull)
result = physical - 0x400000000ull;
else
result = physical;
if (((result+size-1) & dma_mask) != result+size-1)
panic("dma_map_single: Attempt to map address "
"0x%llx-0x%llx, which can't be accessed "
"according to the dma mask 0x%llx\n",
physical, physical+size-1, dma_mask);
goto done;
case OCTEON_DMA_BAR_TYPE_BIG:
#ifdef CONFIG_64BIT
/* If the device supports 64bit addressing, then use BAR2 */
if (dma_mask > BAR2_PCI_ADDRESS) {
result = physical + BAR2_PCI_ADDRESS;
goto done;
}
#endif
if (unlikely(physical < (4ul << 10))) {
panic("dma_map_single: Not allowed to map first 4KB. "
"It interferes with BAR0 special area\n");
} else if (physical < (256ul << 20)) {
if (unlikely(physical + size > (256ul << 20)))
panic("dma_map_single: Requested memory spans "
"Bar0 0:256MB and bootbus\n");
result = physical;
goto done;
} else if (unlikely(physical < (512ul << 20))) {
panic("dma_map_single: Not allowed to map bootbus\n");
} else if (physical < (2ul << 30)) {
if (unlikely(physical + size > (2ul << 30)))
panic("dma_map_single: Requested memory spans "
"Bar0 512MB:2GB and BAR1\n");
result = physical;
goto done;
} else if (physical < (2ul << 30) + (128 << 20)) {
/* Fall through */
} else if (physical <
(4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20)) {
if (unlikely
(physical + size >
(4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20)))
panic("dma_map_single: Requested memory "
"extends past Bar1 (4GB-%luMB)\n",
OCTEON_PCI_BAR1_HOLE_SIZE);
result = physical;
goto done;
} else if ((physical >= 0x410000000ull) &&
(physical < 0x420000000ull)) {
if (unlikely(physical + size > 0x420000000ull))
panic("dma_map_single: Requested memory spans "
"non existant memory\n");
/* BAR0 fixed mapping 256MB:512MB ->
* 16GB+256MB:16GB+512MB */
result = physical - 0x400000000ull;
goto done;
} else {
/* Continued below switch statement */
}
break;
case OCTEON_DMA_BAR_TYPE_SMALL:
#ifdef CONFIG_64BIT
/* If the device supports 64bit addressing, then use BAR2 */
if (dma_mask > BAR2_PCI_ADDRESS) {
result = physical + BAR2_PCI_ADDRESS;
goto done;
}
#endif
/* Continued below switch statement */
break;
default:
panic("dma_map_single: Invalid octeon_dma_bar_type\n");
}
/* Don't allow mapping to span multiple Bar entries. The hardware guys
won't guarantee that DMA across boards work */
if (unlikely((physical >> 22) != ((physical + size - 1) >> 22)))
panic("dma_map_single: "
"Requested memory spans more than one Bar1 entry\n");
if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG)
start_index = 31;
else if (unlikely(dma_mask < (1ul << 27)))
start_index = (dma_mask >> 22);
else
start_index = 31;
/* Only one processor can access the Bar register at once */
raw_spin_lock_irqsave(&bar1_lock, flags);
/* Look through Bar1 for existing mapping that will work */
for (index = start_index; index >= 0; index--) {
if ((bar1_state[index].address_bits == physical >> 22) &&
(bar1_state[index].ref_count)) {
/* An existing mapping will work, use it */
bar1_state[index].ref_count++;
if (unlikely(bar1_state[index].ref_count < 0))
panic("dma_map_single: "
"Bar1[%d] reference count overflowed\n",
(int) index);
result = (index << 22) | (physical & ((1 << 22) - 1));
/* Large BAR1 is offset at 2GB */
if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG)
result += 2ul << 30;
goto done_unlock;
}
}
/* No existing mappings, look for a free entry */
for (index = start_index; index >= 0; index--) {
if (unlikely(bar1_state[index].ref_count == 0)) {
union cvmx_pci_bar1_indexx bar1_index;
/* We have a free entry, use it */
bar1_state[index].ref_count = 1;
bar1_state[index].address_bits = physical >> 22;
bar1_index.u32 = 0;
/* Address bits[35:22] sent to L2C */
bar1_index.s.addr_idx = physical >> 22;
/* Don't put PCI accesses in L2. */
bar1_index.s.ca = 1;
/* Endian Swap Mode */
bar1_index.s.end_swp = 1;
/* Set '1' when the selected address range is valid. */
bar1_index.s.addr_v = 1;
octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index),
bar1_index.u32);
/* An existing mapping will work, use it */
result = (index << 22) | (physical & ((1 << 22) - 1));
/* Large BAR1 is offset at 2GB */
if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG)
result += 2ul << 30;
goto done_unlock;
}
}
pr_err("dma_map_single: "
"Can't find empty BAR1 index for physical mapping 0x%llx\n",
(unsigned long long) physical);
done_unlock:
raw_spin_unlock_irqrestore(&bar1_lock, flags);
done:
pr_debug("dma_map_single 0x%llx->0x%llx\n", physical, result);
return result;
#endif
}
void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
{
#ifndef CONFIG_PCI
/*
* Without PCI/PCIe this function can be called for Octeon internal
* devices such as USB. These devices all support 64bit addressing.
*/
return;
#else
unsigned long flags;
uint64_t index;
/*
* Platform devices, such as the internal USB, skip all
* translation and use Octeon physical addresses directly.
*/
if (dev->bus == &platform_bus_type)
return;
switch (octeon_dma_bar_type) {
case OCTEON_DMA_BAR_TYPE_PCIE:
/* Nothing to do, all mappings are static */
goto done;
case OCTEON_DMA_BAR_TYPE_BIG:
#ifdef CONFIG_64BIT
/* Nothing to do for addresses using BAR2 */
if (dma_addr >= BAR2_PCI_ADDRESS)
goto done;
#endif
if (unlikely(dma_addr < (4ul << 10)))
panic("dma_unmap_single: Unexpect DMA address 0x%llx\n",
dma_addr);
else if (dma_addr < (2ul << 30))
/* Nothing to do for addresses using BAR0 */
goto done;
else if (dma_addr < (2ul << 30) + (128ul << 20))
/* Need to unmap, fall through */
index = (dma_addr - (2ul << 30)) >> 22;
else if (dma_addr <
(4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20))
goto done; /* Nothing to do for the rest of BAR1 */
else
panic("dma_unmap_single: Unexpect DMA address 0x%llx\n",
dma_addr);
/* Continued below switch statement */
break;
case OCTEON_DMA_BAR_TYPE_SMALL:
#ifdef CONFIG_64BIT
/* Nothing to do for addresses using BAR2 */
if (dma_addr >= BAR2_PCI_ADDRESS)
goto done;
#endif
index = dma_addr >> 22;
/* Continued below switch statement */
break;
default:
panic("dma_unmap_single: Invalid octeon_dma_bar_type\n");
}
if (unlikely(index > 31))
panic("dma_unmap_single: "
"Attempt to unmap an invalid address (0x%llx)\n",
dma_addr);
raw_spin_lock_irqsave(&bar1_lock, flags);
bar1_state[index].ref_count--;
if (bar1_state[index].ref_count == 0)
octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0);
else if (unlikely(bar1_state[index].ref_count < 0))
panic("dma_unmap_single: Bar1[%u] reference count < 0\n",
(int) index);
raw_spin_unlock_irqrestore(&bar1_lock, flags);
done:
pr_debug("dma_unmap_single 0x%llx\n", dma_addr);
return;
#endif
}