android_kernel_xiaomi_sm8350/drivers/net/wireless/prism54/isl_oid.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

508 lines
12 KiB
C

/*
*
*
* Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
* Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
* Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#if !defined(_ISL_OID_H)
#define _ISL_OID_H
/*
* MIB related constant and structure definitions for communicating
* with the device firmware
*/
struct obj_ssid {
u8 length;
char octets[33];
} __attribute__ ((packed));
struct obj_key {
u8 type; /* dot11_priv_t */
u8 length;
char key[32];
} __attribute__ ((packed));
struct obj_mlme {
u8 address[6];
u16 id;
u16 state;
u16 code;
} __attribute__ ((packed));
struct obj_mlmeex {
u8 address[6];
u16 id;
u16 state;
u16 code;
u16 size;
u8 data[0];
} __attribute__ ((packed));
struct obj_buffer {
u32 size;
u32 addr; /* 32bit bus address */
} __attribute__ ((packed));
struct obj_bss {
u8 address[6];
int:16; /* padding */
char state;
char reserved;
short age;
char quality;
char rssi;
struct obj_ssid ssid;
short channel;
char beacon_period;
char dtim_period;
short capinfo;
short rates;
short basic_rates;
int:16; /* padding */
} __attribute__ ((packed));
struct obj_bsslist {
u32 nr;
struct obj_bss bsslist[0];
} __attribute__ ((packed));
struct obj_frequencies {
u16 nr;
u16 mhz[0];
} __attribute__ ((packed));
struct obj_attachment {
char type;
char reserved;
short id;
short size;
char data[0];
} __attribute__((packed));
/*
* in case everything's ok, the inlined function below will be
* optimized away by the compiler...
*/
static inline void
__bug_on_wrong_struct_sizes(void)
{
BUG_ON(sizeof (struct obj_ssid) != 34);
BUG_ON(sizeof (struct obj_key) != 34);
BUG_ON(sizeof (struct obj_mlme) != 12);
BUG_ON(sizeof (struct obj_mlmeex) != 14);
BUG_ON(sizeof (struct obj_buffer) != 8);
BUG_ON(sizeof (struct obj_bss) != 60);
BUG_ON(sizeof (struct obj_bsslist) != 4);
BUG_ON(sizeof (struct obj_frequencies) != 2);
}
enum dot11_state_t {
DOT11_STATE_NONE = 0,
DOT11_STATE_AUTHING = 1,
DOT11_STATE_AUTH = 2,
DOT11_STATE_ASSOCING = 3,
DOT11_STATE_ASSOC = 5,
DOT11_STATE_IBSS = 6,
DOT11_STATE_WDS = 7
};
enum dot11_bsstype_t {
DOT11_BSSTYPE_NONE = 0,
DOT11_BSSTYPE_INFRA = 1,
DOT11_BSSTYPE_IBSS = 2,
DOT11_BSSTYPE_ANY = 3
};
enum dot11_auth_t {
DOT11_AUTH_NONE = 0,
DOT11_AUTH_OS = 1,
DOT11_AUTH_SK = 2,
DOT11_AUTH_BOTH = 3
};
enum dot11_mlme_t {
DOT11_MLME_AUTO = 0,
DOT11_MLME_INTERMEDIATE = 1,
DOT11_MLME_EXTENDED = 2
};
enum dot11_priv_t {
DOT11_PRIV_WEP = 0,
DOT11_PRIV_TKIP = 1
};
/* Prism "Nitro" / Frameburst / "Packet Frame Grouping"
* Value is in microseconds. Represents the # microseconds
* the firmware will take to group frames before sending out then out
* together with a CSMA contention. Without this all frames are
* sent with a CSMA contention.
* Bibliography:
* http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html
*/
enum dot11_maxframeburst_t {
/* Values for DOT11_OID_MAXFRAMEBURST */
DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */
DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */
DOT11_MAXFRAMEBURST_IDEAL = 1300, /* Theoretical ideal level */
DOT11_MAXFRAMEBURST_MAX = 5000, /* Use this as max,
* Note: firmware allows for greater values. This is a
* recommended max. I'll update this as I find
* out what the real MAX is. Also note that you don't necessarily
* get better results with a greater value here.
*/
};
/* Support for 802.11 long and short frame preambles.
* Long preamble uses 128-bit sync field, 8-bit CRC
* Short preamble uses 56-bit sync field, 16-bit CRC
*
* 802.11a -- not sure, both optionally ?
* 802.11b supports long and optionally short
* 802.11g supports both */
enum dot11_preamblesettings_t {
DOT11_PREAMBLESETTING_LONG = 0,
/* Allows *only* long 802.11 preambles */
DOT11_PREAMBLESETTING_SHORT = 1,
/* Allows *only* short 802.11 preambles */
DOT11_PREAMBLESETTING_DYNAMIC = 2
/* AutomatiGically set */
};
/* Support for 802.11 slot timing (time between packets).
*
* Long uses 802.11a slot timing (9 usec ?)
* Short uses 802.11b slot timing (20 use ?) */
enum dot11_slotsettings_t {
DOT11_SLOTSETTINGS_LONG = 0,
/* Allows *only* long 802.11b slot timing */
DOT11_SLOTSETTINGS_SHORT = 1,
/* Allows *only* long 802.11a slot timing */
DOT11_SLOTSETTINGS_DYNAMIC = 2
/* AutomatiGically set */
};
/* All you need to know, ERP is "Extended Rate PHY".
* An Extended Rate PHY (ERP) STA or AP shall support three different
* preamble and header formats:
* Long preamble (refer to above)
* Short preamble (refer to above)
* OFDM preamble ( ? )
*
* I'm assuming here Protection tells the AP
* to be careful, a STA which cannot handle the long pre-amble
* has joined.
*/
enum do11_nonerpstatus_t {
DOT11_ERPSTAT_NONEPRESENT = 0,
DOT11_ERPSTAT_USEPROTECTION = 1
};
/* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-*
* The key here is DOT11 NON ERP NEVER protects against
* NON ERP STA's. You *don't* want this unless
* you know what you are doing. It means you will only
* get Extended Rate capabilities */
enum dot11_nonerpprotection_t {
DOT11_NONERP_NEVER = 0,
DOT11_NONERP_ALWAYS = 1,
DOT11_NONERP_DYNAMIC = 2
};
/* Preset OID configuration for 802.11 modes
* Note: DOT11_OID_CW[MIN|MAX] hold the values of the
* DCS MIN|MAX backoff used */
enum dot11_profile_t { /* And set/allowed values */
/* Allowed values for DOT11_OID_PROFILES */
DOT11_PROFILE_B_ONLY = 0,
/* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps
* DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
* DOT11_OID_CWMIN: 31
* DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
* DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_LONG
*/
DOT11_PROFILE_MIXED_G_WIFI = 1,
/* DOT11_OID_RATES: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbs
* DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
* DOT11_OID_CWMIN: 15
* DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
* DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_DYNAMIC
*/
DOT11_PROFILE_MIXED_LONG = 2, /* "Long range" */
/* Same as Profile MIXED_G_WIFI */
DOT11_PROFILE_G_ONLY = 3,
/* Same as Profile MIXED_G_WIFI */
DOT11_PROFILE_TEST = 4,
/* Same as Profile MIXED_G_WIFI except:
* DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_SHORT
* DOT11_OID_NONEPROTECTION: DOT11_NOERP_NEVER
* DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_SHORT
*/
DOT11_PROFILE_B_WIFI = 5,
/* Same as Profile B_ONLY */
DOT11_PROFILE_A_ONLY = 6,
/* Same as Profile MIXED_G_WIFI except:
* DOT11_OID_RATES: 6, 9, 12, 18, 24, 36, 48, 54Mbs
*/
DOT11_PROFILE_MIXED_SHORT = 7
/* Same as MIXED_G_WIFI */
};
/* The dot11d conformance level configures the 802.11d conformance levels.
* The following conformance levels exist:*/
enum oid_inl_conformance_t {
OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */
OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */
OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to
* determine channel AND/OR just make assumption that active
* channels are valid channels */
};
enum oid_inl_mode_t {
INL_MODE_NONE = -1,
INL_MODE_PROMISCUOUS = 0,
INL_MODE_CLIENT = 1,
INL_MODE_AP = 2,
INL_MODE_SNIFFER = 3
};
enum oid_inl_config_t {
INL_CONFIG_NOTHING = 0x00,
INL_CONFIG_MANUALRUN = 0x01,
INL_CONFIG_FRAMETRAP = 0x02,
INL_CONFIG_RXANNEX = 0x04,
INL_CONFIG_TXANNEX = 0x08,
INL_CONFIG_WDS = 0x10
};
enum oid_inl_phycap_t {
INL_PHYCAP_2400MHZ = 1,
INL_PHYCAP_5000MHZ = 2,
INL_PHYCAP_FAA = 0x80000000, /* Means card supports the FAA switch */
};
enum oid_num_t {
GEN_OID_MACADDRESS = 0,
GEN_OID_LINKSTATE,
GEN_OID_WATCHDOG,
GEN_OID_MIBOP,
GEN_OID_OPTIONS,
GEN_OID_LEDCONFIG,
/* 802.11 */
DOT11_OID_BSSTYPE,
DOT11_OID_BSSID,
DOT11_OID_SSID,
DOT11_OID_STATE,
DOT11_OID_AID,
DOT11_OID_COUNTRYSTRING,
DOT11_OID_SSIDOVERRIDE,
DOT11_OID_MEDIUMLIMIT,
DOT11_OID_BEACONPERIOD,
DOT11_OID_DTIMPERIOD,
DOT11_OID_ATIMWINDOW,
DOT11_OID_LISTENINTERVAL,
DOT11_OID_CFPPERIOD,
DOT11_OID_CFPDURATION,
DOT11_OID_AUTHENABLE,
DOT11_OID_PRIVACYINVOKED,
DOT11_OID_EXUNENCRYPTED,
DOT11_OID_DEFKEYID,
DOT11_OID_DEFKEYX, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
DOT11_OID_STAKEY,
DOT11_OID_REKEYTHRESHOLD,
DOT11_OID_STASC,
DOT11_OID_PRIVTXREJECTED,
DOT11_OID_PRIVRXPLAIN,
DOT11_OID_PRIVRXFAILED,
DOT11_OID_PRIVRXNOKEY,
DOT11_OID_RTSTHRESH,
DOT11_OID_FRAGTHRESH,
DOT11_OID_SHORTRETRIES,
DOT11_OID_LONGRETRIES,
DOT11_OID_MAXTXLIFETIME,
DOT11_OID_MAXRXLIFETIME,
DOT11_OID_AUTHRESPTIMEOUT,
DOT11_OID_ASSOCRESPTIMEOUT,
DOT11_OID_ALOFT_TABLE,
DOT11_OID_ALOFT_CTRL_TABLE,
DOT11_OID_ALOFT_RETREAT,
DOT11_OID_ALOFT_PROGRESS,
DOT11_OID_ALOFT_FIXEDRATE,
DOT11_OID_ALOFT_RSSIGRAPH,
DOT11_OID_ALOFT_CONFIG,
DOT11_OID_VDCFX,
DOT11_OID_MAXFRAMEBURST,
DOT11_OID_PSM,
DOT11_OID_CAMTIMEOUT,
DOT11_OID_RECEIVEDTIMS,
DOT11_OID_ROAMPREFERENCE,
DOT11_OID_BRIDGELOCAL,
DOT11_OID_CLIENTS,
DOT11_OID_CLIENTSASSOCIATED,
DOT11_OID_CLIENTX, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
DOT11_OID_CLIENTFIND,
DOT11_OID_WDSLINKADD,
DOT11_OID_WDSLINKREMOVE,
DOT11_OID_EAPAUTHSTA,
DOT11_OID_EAPUNAUTHSTA,
DOT11_OID_DOT1XENABLE,
DOT11_OID_MICFAILURE,
DOT11_OID_REKEYINDICATE,
DOT11_OID_MPDUTXSUCCESSFUL,
DOT11_OID_MPDUTXONERETRY,
DOT11_OID_MPDUTXMULTIPLERETRIES,
DOT11_OID_MPDUTXFAILED,
DOT11_OID_MPDURXSUCCESSFUL,
DOT11_OID_MPDURXDUPS,
DOT11_OID_RTSSUCCESSFUL,
DOT11_OID_RTSFAILED,
DOT11_OID_ACKFAILED,
DOT11_OID_FRAMERECEIVES,
DOT11_OID_FRAMEERRORS,
DOT11_OID_FRAMEABORTS,
DOT11_OID_FRAMEABORTSPHY,
DOT11_OID_SLOTTIME,
DOT11_OID_CWMIN, /* MIN DCS backoff */
DOT11_OID_CWMAX, /* MAX DCS backoff */
DOT11_OID_ACKWINDOW,
DOT11_OID_ANTENNARX,
DOT11_OID_ANTENNATX,
DOT11_OID_ANTENNADIVERSITY,
DOT11_OID_CHANNEL,
DOT11_OID_EDTHRESHOLD,
DOT11_OID_PREAMBLESETTINGS,
DOT11_OID_RATES,
DOT11_OID_CCAMODESUPPORTED,
DOT11_OID_CCAMODE,
DOT11_OID_RSSIVECTOR,
DOT11_OID_OUTPUTPOWERTABLE,
DOT11_OID_OUTPUTPOWER,
DOT11_OID_SUPPORTEDRATES,
DOT11_OID_FREQUENCY,
DOT11_OID_SUPPORTEDFREQUENCIES,
DOT11_OID_NOISEFLOOR,
DOT11_OID_FREQUENCYACTIVITY,
DOT11_OID_IQCALIBRATIONTABLE,
DOT11_OID_NONERPPROTECTION,
DOT11_OID_SLOTSETTINGS,
DOT11_OID_NONERPTIMEOUT,
DOT11_OID_PROFILES,
DOT11_OID_EXTENDEDRATES,
DOT11_OID_DEAUTHENTICATE,
DOT11_OID_AUTHENTICATE,
DOT11_OID_DISASSOCIATE,
DOT11_OID_ASSOCIATE,
DOT11_OID_SCAN,
DOT11_OID_BEACON,
DOT11_OID_PROBE,
DOT11_OID_DEAUTHENTICATEEX,
DOT11_OID_AUTHENTICATEEX,
DOT11_OID_DISASSOCIATEEX,
DOT11_OID_ASSOCIATEEX,
DOT11_OID_REASSOCIATE,
DOT11_OID_REASSOCIATEEX,
DOT11_OID_NONERPSTATUS,
DOT11_OID_STATIMEOUT,
DOT11_OID_MLMEAUTOLEVEL,
DOT11_OID_BSSTIMEOUT,
DOT11_OID_ATTACHMENT,
DOT11_OID_PSMBUFFER,
DOT11_OID_BSSS,
DOT11_OID_BSSX, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
DOT11_OID_BSSFIND,
DOT11_OID_BSSLIST,
OID_INL_TUNNEL,
OID_INL_MEMADDR,
OID_INL_MEMORY,
OID_INL_MODE,
OID_INL_COMPONENT_NR,
OID_INL_VERSION,
OID_INL_INTERFACE_ID,
OID_INL_COMPONENT_ID,
OID_INL_CONFIG,
OID_INL_DOT11D_CONFORMANCE,
OID_INL_PHYCAPABILITIES,
OID_INL_OUTPUTPOWER,
OID_NUM_LAST
};
#define OID_FLAG_CACHED 0x80
#define OID_FLAG_TYPE 0x7f
#define OID_TYPE_U32 0x01
#define OID_TYPE_SSID 0x02
#define OID_TYPE_KEY 0x03
#define OID_TYPE_BUFFER 0x04
#define OID_TYPE_BSS 0x05
#define OID_TYPE_BSSLIST 0x06
#define OID_TYPE_FREQUENCIES 0x07
#define OID_TYPE_MLME 0x08
#define OID_TYPE_MLMEEX 0x09
#define OID_TYPE_ADDR 0x0A
#define OID_TYPE_RAW 0x0B
#define OID_TYPE_ATTACH 0x0C
/* OID_TYPE_MLMEEX is special because of a variable size field when sending.
* Not yet implemented (not used in driver anyway).
*/
struct oid_t {
enum oid_num_t oid;
short range; /* to define a range of oid */
short size; /* max size of the associated data */
char flags;
};
union oid_res_t {
void *ptr;
u32 u;
};
#define IWMAX_BITRATES 20
#define IWMAX_BSS 24
#define IWMAX_FREQ 30
#define PRIV_STR_SIZE 1024
#endif /* !defined(_ISL_OID_H) */
/* EOF */