android_kernel_xiaomi_sm8350/drivers/media
Antti Palosaari 5decdd2729 V4L/DVB (5236): Initial support for Sigmatek DVB-110 DVB-T
This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has based
on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353)
demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is rather similar
as used in MSI Megasky GL861.
Currently, the driver works only in USB 2.0. In my understanding USB 1.1 is
also supported by hw but I cannot test it due to lack of USB 1.1 port. Device
supports only isochronous mode transfers. There is also eeprom in usb
controller(at least in address range 0x80 - 0xbf) for storing data, eg.
firmware. Anyway, firmware loading is not used / required by the device.
There seems to be at least one unknown I2C device in address 0xa0, probably
remote control or GPIO. Windows drivers reads registers from 0x00 to 0x07
from this unknown address.
Driver is based on gl861 module. Tuner has a lot of problems to lock with
megasky qt1010 module with this hardware with some broadcasting standards.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:35:30 -02:00
..
common V4L/DVB (5193): Remove the unused kernel config option VIDEO_VIDEOBUF 2007-02-21 13:35:16 -02:00
dvb V4L/DVB (5236): Initial support for Sigmatek DVB-110 DVB-T 2007-02-21 13:35:30 -02:00
radio V4L/DVB (5201): Radio/: Convert to generic boolean-values 2007-02-21 13:35:17 -02:00
video V4L/DVB (5212): Pvrusb2: Be more forgiving about encoder firmware size 2007-02-21 13:35:20 -02:00
Kconfig V4L/DVB (5196): VIDEO_BUF depends on PCI 2007-02-21 13:35:16 -02:00
Makefile