3c26e17032
Minor cleanups for the MMC/SD support on avr32: - Make at32_add_device_mci() properly initialize "missing" platform data ... so boards like STK1002 won't try GPIO 0. - Switch over to gpio_is_valid() instead of testing for only one designated value. - Provide STK1002 platform data for the unlikely case that switches are set so first Ethernet controller isn't in use. (That's the only way to get card detect and writeprotect switch sensing on the STK1000.) And get rid of one "unused variable" warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1172 lines
27 KiB
C
1172 lines
27 KiB
C
/*
|
|
* Atmel MultiMedia Card Interface driver
|
|
*
|
|
* Copyright (C) 2004-2008 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/blkdev.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/stat.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <asm/atmel-mci.h>
|
|
#include <asm/io.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <asm/arch/board.h>
|
|
|
|
#include "atmel-mci-regs.h"
|
|
|
|
#define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
|
|
|
|
enum {
|
|
EVENT_CMD_COMPLETE = 0,
|
|
EVENT_DATA_ERROR,
|
|
EVENT_DATA_COMPLETE,
|
|
EVENT_STOP_SENT,
|
|
EVENT_STOP_COMPLETE,
|
|
EVENT_XFER_COMPLETE,
|
|
};
|
|
|
|
struct atmel_mci {
|
|
struct mmc_host *mmc;
|
|
void __iomem *regs;
|
|
|
|
struct scatterlist *sg;
|
|
unsigned int pio_offset;
|
|
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
|
|
u32 cmd_status;
|
|
u32 data_status;
|
|
u32 stop_status;
|
|
u32 stop_cmdr;
|
|
|
|
u32 mode_reg;
|
|
u32 sdc_reg;
|
|
|
|
struct tasklet_struct tasklet;
|
|
unsigned long pending_events;
|
|
unsigned long completed_events;
|
|
|
|
int present;
|
|
int detect_pin;
|
|
int wp_pin;
|
|
|
|
/* For detect pin debouncing */
|
|
struct timer_list detect_timer;
|
|
|
|
unsigned long bus_hz;
|
|
unsigned long mapbase;
|
|
struct clk *mck;
|
|
struct platform_device *pdev;
|
|
};
|
|
|
|
#define atmci_is_completed(host, event) \
|
|
test_bit(event, &host->completed_events)
|
|
#define atmci_test_and_clear_pending(host, event) \
|
|
test_and_clear_bit(event, &host->pending_events)
|
|
#define atmci_test_and_set_completed(host, event) \
|
|
test_and_set_bit(event, &host->completed_events)
|
|
#define atmci_set_completed(host, event) \
|
|
set_bit(event, &host->completed_events)
|
|
#define atmci_set_pending(host, event) \
|
|
set_bit(event, &host->pending_events)
|
|
#define atmci_clear_pending(host, event) \
|
|
clear_bit(event, &host->pending_events)
|
|
|
|
/*
|
|
* The debugfs stuff below is mostly optimized away when
|
|
* CONFIG_DEBUG_FS is not set.
|
|
*/
|
|
static int atmci_req_show(struct seq_file *s, void *v)
|
|
{
|
|
struct atmel_mci *host = s->private;
|
|
struct mmc_request *mrq = host->mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_command *stop;
|
|
struct mmc_data *data;
|
|
|
|
/* Make sure we get a consistent snapshot */
|
|
spin_lock_irq(&host->mmc->lock);
|
|
|
|
if (mrq) {
|
|
cmd = mrq->cmd;
|
|
data = mrq->data;
|
|
stop = mrq->stop;
|
|
|
|
if (cmd)
|
|
seq_printf(s,
|
|
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
|
|
cmd->opcode, cmd->arg, cmd->flags,
|
|
cmd->resp[0], cmd->resp[1], cmd->resp[2],
|
|
cmd->resp[2], cmd->error);
|
|
if (data)
|
|
seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
|
|
data->bytes_xfered, data->blocks,
|
|
data->blksz, data->flags, data->error);
|
|
if (stop)
|
|
seq_printf(s,
|
|
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
|
|
stop->opcode, stop->arg, stop->flags,
|
|
stop->resp[0], stop->resp[1], stop->resp[2],
|
|
stop->resp[2], stop->error);
|
|
}
|
|
|
|
spin_unlock_irq(&host->mmc->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmci_req_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, atmci_req_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations atmci_req_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = atmci_req_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void atmci_show_status_reg(struct seq_file *s,
|
|
const char *regname, u32 value)
|
|
{
|
|
static const char *sr_bit[] = {
|
|
[0] = "CMDRDY",
|
|
[1] = "RXRDY",
|
|
[2] = "TXRDY",
|
|
[3] = "BLKE",
|
|
[4] = "DTIP",
|
|
[5] = "NOTBUSY",
|
|
[8] = "SDIOIRQA",
|
|
[9] = "SDIOIRQB",
|
|
[16] = "RINDE",
|
|
[17] = "RDIRE",
|
|
[18] = "RCRCE",
|
|
[19] = "RENDE",
|
|
[20] = "RTOE",
|
|
[21] = "DCRCE",
|
|
[22] = "DTOE",
|
|
[30] = "OVRE",
|
|
[31] = "UNRE",
|
|
};
|
|
unsigned int i;
|
|
|
|
seq_printf(s, "%s:\t0x%08x", regname, value);
|
|
for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
|
|
if (value & (1 << i)) {
|
|
if (sr_bit[i])
|
|
seq_printf(s, " %s", sr_bit[i]);
|
|
else
|
|
seq_puts(s, " UNKNOWN");
|
|
}
|
|
}
|
|
seq_putc(s, '\n');
|
|
}
|
|
|
|
static int atmci_regs_show(struct seq_file *s, void *v)
|
|
{
|
|
struct atmel_mci *host = s->private;
|
|
u32 *buf;
|
|
|
|
buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
/* Grab a more or less consistent snapshot */
|
|
spin_lock_irq(&host->mmc->lock);
|
|
memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
|
|
spin_unlock_irq(&host->mmc->lock);
|
|
|
|
seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
|
|
buf[MCI_MR / 4],
|
|
buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
|
|
buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
|
|
buf[MCI_MR / 4] & 0xff);
|
|
seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
|
|
seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
|
|
seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
|
|
seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
|
|
buf[MCI_BLKR / 4],
|
|
buf[MCI_BLKR / 4] & 0xffff,
|
|
(buf[MCI_BLKR / 4] >> 16) & 0xffff);
|
|
|
|
/* Don't read RSPR and RDR; it will consume the data there */
|
|
|
|
atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
|
|
atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmci_regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, atmci_regs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations atmci_regs_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = atmci_regs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void atmci_init_debugfs(struct atmel_mci *host)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct dentry *root;
|
|
struct dentry *node;
|
|
struct resource *res;
|
|
|
|
mmc = host->mmc;
|
|
root = mmc->debugfs_root;
|
|
if (!root)
|
|
return;
|
|
|
|
node = debugfs_create_file("regs", S_IRUSR, root, host,
|
|
&atmci_regs_fops);
|
|
if (IS_ERR(node))
|
|
return;
|
|
if (!node)
|
|
goto err;
|
|
|
|
res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
|
|
node->d_inode->i_size = res->end - res->start + 1;
|
|
|
|
node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_x32("pending_events", S_IRUSR, root,
|
|
(u32 *)&host->pending_events);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_x32("completed_events", S_IRUSR, root,
|
|
(u32 *)&host->completed_events);
|
|
if (!node)
|
|
goto err;
|
|
|
|
return;
|
|
|
|
err:
|
|
dev_err(&host->pdev->dev,
|
|
"failed to initialize debugfs for controller\n");
|
|
}
|
|
|
|
static void atmci_enable(struct atmel_mci *host)
|
|
{
|
|
clk_enable(host->mck);
|
|
mci_writel(host, CR, MCI_CR_MCIEN);
|
|
mci_writel(host, MR, host->mode_reg);
|
|
mci_writel(host, SDCR, host->sdc_reg);
|
|
}
|
|
|
|
static void atmci_disable(struct atmel_mci *host)
|
|
{
|
|
mci_writel(host, CR, MCI_CR_SWRST);
|
|
|
|
/* Stall until write is complete, then disable the bus clock */
|
|
mci_readl(host, SR);
|
|
clk_disable(host->mck);
|
|
}
|
|
|
|
static inline unsigned int ns_to_clocks(struct atmel_mci *host,
|
|
unsigned int ns)
|
|
{
|
|
return (ns * (host->bus_hz / 1000000) + 999) / 1000;
|
|
}
|
|
|
|
static void atmci_set_timeout(struct atmel_mci *host,
|
|
struct mmc_data *data)
|
|
{
|
|
static unsigned dtomul_to_shift[] = {
|
|
0, 4, 7, 8, 10, 12, 16, 20
|
|
};
|
|
unsigned timeout;
|
|
unsigned dtocyc;
|
|
unsigned dtomul;
|
|
|
|
timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
|
|
|
|
for (dtomul = 0; dtomul < 8; dtomul++) {
|
|
unsigned shift = dtomul_to_shift[dtomul];
|
|
dtocyc = (timeout + (1 << shift) - 1) >> shift;
|
|
if (dtocyc < 15)
|
|
break;
|
|
}
|
|
|
|
if (dtomul >= 8) {
|
|
dtomul = 7;
|
|
dtocyc = 15;
|
|
}
|
|
|
|
dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
|
|
dtocyc << dtomul_to_shift[dtomul]);
|
|
mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
|
|
}
|
|
|
|
/*
|
|
* Return mask with command flags to be enabled for this command.
|
|
*/
|
|
static u32 atmci_prepare_command(struct mmc_host *mmc,
|
|
struct mmc_command *cmd)
|
|
{
|
|
struct mmc_data *data;
|
|
u32 cmdr;
|
|
|
|
cmd->error = -EINPROGRESS;
|
|
|
|
cmdr = MCI_CMDR_CMDNB(cmd->opcode);
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136)
|
|
cmdr |= MCI_CMDR_RSPTYP_136BIT;
|
|
else
|
|
cmdr |= MCI_CMDR_RSPTYP_48BIT;
|
|
}
|
|
|
|
/*
|
|
* This should really be MAXLAT_5 for CMD2 and ACMD41, but
|
|
* it's too difficult to determine whether this is an ACMD or
|
|
* not. Better make it 64.
|
|
*/
|
|
cmdr |= MCI_CMDR_MAXLAT_64CYC;
|
|
|
|
if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
cmdr |= MCI_CMDR_OPDCMD;
|
|
|
|
data = cmd->data;
|
|
if (data) {
|
|
cmdr |= MCI_CMDR_START_XFER;
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
cmdr |= MCI_CMDR_STREAM;
|
|
else if (data->blocks > 1)
|
|
cmdr |= MCI_CMDR_MULTI_BLOCK;
|
|
else
|
|
cmdr |= MCI_CMDR_BLOCK;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
cmdr |= MCI_CMDR_TRDIR_READ;
|
|
}
|
|
|
|
return cmdr;
|
|
}
|
|
|
|
static void atmci_start_command(struct atmel_mci *host,
|
|
struct mmc_command *cmd,
|
|
u32 cmd_flags)
|
|
{
|
|
/* Must read host->cmd after testing event flags */
|
|
smp_rmb();
|
|
WARN_ON(host->cmd);
|
|
host->cmd = cmd;
|
|
|
|
dev_vdbg(&host->mmc->class_dev,
|
|
"start command: ARGR=0x%08x CMDR=0x%08x\n",
|
|
cmd->arg, cmd_flags);
|
|
|
|
mci_writel(host, ARGR, cmd->arg);
|
|
mci_writel(host, CMDR, cmd_flags);
|
|
}
|
|
|
|
static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
atmci_start_command(host, data->stop, host->stop_cmdr);
|
|
mci_writel(host, IER, MCI_CMDRDY);
|
|
}
|
|
|
|
static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
WARN_ON(host->cmd || host->data);
|
|
host->mrq = NULL;
|
|
|
|
atmci_disable(host);
|
|
|
|
mmc_request_done(mmc, mrq);
|
|
}
|
|
|
|
/*
|
|
* Returns a mask of interrupt flags to be enabled after the whole
|
|
* request has been prepared.
|
|
*/
|
|
static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
u32 iflags;
|
|
|
|
data->error = -EINPROGRESS;
|
|
|
|
WARN_ON(host->data);
|
|
host->sg = NULL;
|
|
host->data = data;
|
|
|
|
mci_writel(host, BLKR, MCI_BCNT(data->blocks)
|
|
| MCI_BLKLEN(data->blksz));
|
|
dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n",
|
|
MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
|
|
|
|
iflags = ATMCI_DATA_ERROR_FLAGS;
|
|
host->sg = data->sg;
|
|
host->pio_offset = 0;
|
|
if (data->flags & MMC_DATA_READ)
|
|
iflags |= MCI_RXRDY;
|
|
else
|
|
iflags |= MCI_TXRDY;
|
|
|
|
return iflags;
|
|
}
|
|
|
|
static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
struct mmc_data *data;
|
|
struct mmc_command *cmd;
|
|
u32 iflags;
|
|
u32 cmdflags = 0;
|
|
|
|
iflags = mci_readl(host, IMR);
|
|
if (iflags)
|
|
dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
|
|
mci_readl(host, IMR));
|
|
|
|
WARN_ON(host->mrq != NULL);
|
|
|
|
/*
|
|
* We may "know" the card is gone even though there's still an
|
|
* electrical connection. If so, we really need to communicate
|
|
* this to the MMC core since there won't be any more
|
|
* interrupts as the card is completely removed. Otherwise,
|
|
* the MMC core might believe the card is still there even
|
|
* though the card was just removed very slowly.
|
|
*/
|
|
if (!host->present) {
|
|
mrq->cmd->error = -ENOMEDIUM;
|
|
mmc_request_done(mmc, mrq);
|
|
return;
|
|
}
|
|
|
|
host->mrq = mrq;
|
|
host->pending_events = 0;
|
|
host->completed_events = 0;
|
|
|
|
atmci_enable(host);
|
|
|
|
/* We don't support multiple blocks of weird lengths. */
|
|
data = mrq->data;
|
|
if (data) {
|
|
if (data->blocks > 1 && data->blksz & 3)
|
|
goto fail;
|
|
atmci_set_timeout(host, data);
|
|
}
|
|
|
|
iflags = MCI_CMDRDY;
|
|
cmd = mrq->cmd;
|
|
cmdflags = atmci_prepare_command(mmc, cmd);
|
|
atmci_start_command(host, cmd, cmdflags);
|
|
|
|
if (data)
|
|
iflags |= atmci_submit_data(mmc, data);
|
|
|
|
if (mrq->stop) {
|
|
host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
|
|
host->stop_cmdr |= MCI_CMDR_STOP_XFER;
|
|
if (!(data->flags & MMC_DATA_WRITE))
|
|
host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
host->stop_cmdr |= MCI_CMDR_STREAM;
|
|
else
|
|
host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK;
|
|
}
|
|
|
|
/*
|
|
* We could have enabled interrupts earlier, but I suspect
|
|
* that would open up a nice can of interesting race
|
|
* conditions (e.g. command and data complete, but stop not
|
|
* prepared yet.)
|
|
*/
|
|
mci_writel(host, IER, iflags);
|
|
|
|
return;
|
|
|
|
fail:
|
|
atmci_disable(host);
|
|
host->mrq = NULL;
|
|
mrq->cmd->error = -EINVAL;
|
|
mmc_request_done(mmc, mrq);
|
|
}
|
|
|
|
static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
if (ios->clock) {
|
|
u32 clkdiv;
|
|
|
|
/* Set clock rate */
|
|
clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
|
|
if (clkdiv > 255) {
|
|
dev_warn(&mmc->class_dev,
|
|
"clock %u too slow; using %lu\n",
|
|
ios->clock, host->bus_hz / (2 * 256));
|
|
clkdiv = 255;
|
|
}
|
|
|
|
host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
|
|
| MCI_MR_RDPROOF;
|
|
}
|
|
|
|
switch (ios->bus_width) {
|
|
case MMC_BUS_WIDTH_1:
|
|
host->sdc_reg = 0;
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
host->sdc_reg = MCI_SDCBUS_4BIT;
|
|
break;
|
|
}
|
|
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_ON:
|
|
/* Send init sequence (74 clock cycles) */
|
|
atmci_enable(host);
|
|
mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
|
|
while (!(mci_readl(host, SR) & MCI_CMDRDY))
|
|
cpu_relax();
|
|
atmci_disable(host);
|
|
break;
|
|
default:
|
|
/*
|
|
* TODO: None of the currently available AVR32-based
|
|
* boards allow MMC power to be turned off. Implement
|
|
* power control when this can be tested properly.
|
|
*/
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int atmci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
int read_only = 0;
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
if (gpio_is_valid(host->wp_pin)) {
|
|
read_only = gpio_get_value(host->wp_pin);
|
|
dev_dbg(&mmc->class_dev, "card is %s\n",
|
|
read_only ? "read-only" : "read-write");
|
|
} else {
|
|
dev_dbg(&mmc->class_dev,
|
|
"no pin for checking read-only switch."
|
|
" Assuming write-enable.\n");
|
|
}
|
|
|
|
return read_only;
|
|
}
|
|
|
|
static struct mmc_host_ops atmci_ops = {
|
|
.request = atmci_request,
|
|
.set_ios = atmci_set_ios,
|
|
.get_ro = atmci_get_ro,
|
|
};
|
|
|
|
static void atmci_command_complete(struct atmel_mci *host,
|
|
struct mmc_command *cmd, u32 status)
|
|
{
|
|
/* Read the response from the card (up to 16 bytes) */
|
|
cmd->resp[0] = mci_readl(host, RSPR);
|
|
cmd->resp[1] = mci_readl(host, RSPR);
|
|
cmd->resp[2] = mci_readl(host, RSPR);
|
|
cmd->resp[3] = mci_readl(host, RSPR);
|
|
|
|
if (status & MCI_RTOE)
|
|
cmd->error = -ETIMEDOUT;
|
|
else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE))
|
|
cmd->error = -EILSEQ;
|
|
else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE))
|
|
cmd->error = -EIO;
|
|
else
|
|
cmd->error = 0;
|
|
|
|
if (cmd->error) {
|
|
dev_dbg(&host->mmc->class_dev,
|
|
"command error: status=0x%08x\n", status);
|
|
|
|
if (cmd->data) {
|
|
host->data = NULL;
|
|
mci_writel(host, IDR, MCI_NOTBUSY
|
|
| MCI_TXRDY | MCI_RXRDY
|
|
| ATMCI_DATA_ERROR_FLAGS);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void atmci_detect_change(unsigned long data)
|
|
{
|
|
struct atmel_mci *host = (struct atmel_mci *)data;
|
|
struct mmc_request *mrq = host->mrq;
|
|
int present;
|
|
|
|
/*
|
|
* atmci_remove() sets detect_pin to -1 before freeing the
|
|
* interrupt. We must not re-enable the interrupt if it has
|
|
* been freed.
|
|
*/
|
|
smp_rmb();
|
|
if (!gpio_is_valid(host->detect_pin))
|
|
return;
|
|
|
|
enable_irq(gpio_to_irq(host->detect_pin));
|
|
present = !gpio_get_value(host->detect_pin);
|
|
|
|
dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
|
|
present, host->present);
|
|
|
|
if (present != host->present) {
|
|
dev_dbg(&host->mmc->class_dev, "card %s\n",
|
|
present ? "inserted" : "removed");
|
|
host->present = present;
|
|
|
|
/* Reset controller if card is gone */
|
|
if (!present) {
|
|
mci_writel(host, CR, MCI_CR_SWRST);
|
|
mci_writel(host, IDR, ~0UL);
|
|
mci_writel(host, CR, MCI_CR_MCIEN);
|
|
}
|
|
|
|
/* Clean up queue if present */
|
|
if (mrq) {
|
|
/*
|
|
* Reset controller to terminate any ongoing
|
|
* commands or data transfers.
|
|
*/
|
|
mci_writel(host, CR, MCI_CR_SWRST);
|
|
|
|
if (!atmci_is_completed(host, EVENT_CMD_COMPLETE))
|
|
mrq->cmd->error = -ENOMEDIUM;
|
|
|
|
if (mrq->data && !atmci_is_completed(host,
|
|
EVENT_DATA_COMPLETE)) {
|
|
host->data = NULL;
|
|
mrq->data->error = -ENOMEDIUM;
|
|
}
|
|
if (mrq->stop && !atmci_is_completed(host,
|
|
EVENT_STOP_COMPLETE))
|
|
mrq->stop->error = -ENOMEDIUM;
|
|
|
|
host->cmd = NULL;
|
|
atmci_request_end(host->mmc, mrq);
|
|
}
|
|
|
|
mmc_detect_change(host->mmc, 0);
|
|
}
|
|
}
|
|
|
|
static void atmci_tasklet_func(unsigned long priv)
|
|
{
|
|
struct mmc_host *mmc = (struct mmc_host *)priv;
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
struct mmc_request *mrq = host->mrq;
|
|
struct mmc_data *data = host->data;
|
|
|
|
dev_vdbg(&mmc->class_dev,
|
|
"tasklet: pending/completed/mask %lx/%lx/%x\n",
|
|
host->pending_events, host->completed_events,
|
|
mci_readl(host, IMR));
|
|
|
|
if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) {
|
|
/*
|
|
* host->cmd must be set to NULL before the interrupt
|
|
* handler sees EVENT_CMD_COMPLETE
|
|
*/
|
|
host->cmd = NULL;
|
|
smp_wmb();
|
|
atmci_set_completed(host, EVENT_CMD_COMPLETE);
|
|
atmci_command_complete(host, mrq->cmd, host->cmd_status);
|
|
|
|
if (!mrq->cmd->error && mrq->stop
|
|
&& atmci_is_completed(host, EVENT_XFER_COMPLETE)
|
|
&& !atmci_test_and_set_completed(host,
|
|
EVENT_STOP_SENT))
|
|
send_stop_cmd(host->mmc, mrq->data);
|
|
}
|
|
if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) {
|
|
/*
|
|
* host->cmd must be set to NULL before the interrupt
|
|
* handler sees EVENT_STOP_COMPLETE
|
|
*/
|
|
host->cmd = NULL;
|
|
smp_wmb();
|
|
atmci_set_completed(host, EVENT_STOP_COMPLETE);
|
|
atmci_command_complete(host, mrq->stop, host->stop_status);
|
|
}
|
|
if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) {
|
|
u32 status = host->data_status;
|
|
|
|
dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status);
|
|
|
|
atmci_set_completed(host, EVENT_DATA_ERROR);
|
|
atmci_set_completed(host, EVENT_DATA_COMPLETE);
|
|
|
|
if (status & MCI_DTOE) {
|
|
dev_dbg(&mmc->class_dev,
|
|
"data timeout error\n");
|
|
data->error = -ETIMEDOUT;
|
|
} else if (status & MCI_DCRCE) {
|
|
dev_dbg(&mmc->class_dev, "data CRC error\n");
|
|
data->error = -EILSEQ;
|
|
} else {
|
|
dev_dbg(&mmc->class_dev,
|
|
"data FIFO error (status=%08x)\n",
|
|
status);
|
|
data->error = -EIO;
|
|
}
|
|
|
|
if (host->present && data->stop
|
|
&& atmci_is_completed(host, EVENT_CMD_COMPLETE)
|
|
&& !atmci_test_and_set_completed(
|
|
host, EVENT_STOP_SENT))
|
|
send_stop_cmd(host->mmc, data);
|
|
|
|
host->data = NULL;
|
|
}
|
|
if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) {
|
|
atmci_set_completed(host, EVENT_DATA_COMPLETE);
|
|
|
|
if (!atmci_is_completed(host, EVENT_DATA_ERROR)) {
|
|
data->bytes_xfered = data->blocks * data->blksz;
|
|
data->error = 0;
|
|
}
|
|
|
|
host->data = NULL;
|
|
}
|
|
|
|
if (host->mrq && !host->cmd && !host->data)
|
|
atmci_request_end(mmc, host->mrq);
|
|
}
|
|
|
|
static void atmci_read_data_pio(struct atmel_mci *host)
|
|
{
|
|
struct scatterlist *sg = host->sg;
|
|
void *buf = sg_virt(sg);
|
|
unsigned int offset = host->pio_offset;
|
|
struct mmc_data *data = host->data;
|
|
u32 value;
|
|
u32 status;
|
|
unsigned int nbytes = 0;
|
|
|
|
do {
|
|
value = mci_readl(host, RDR);
|
|
if (likely(offset + 4 <= sg->length)) {
|
|
put_unaligned(value, (u32 *)(buf + offset));
|
|
|
|
offset += 4;
|
|
nbytes += 4;
|
|
|
|
if (offset == sg->length) {
|
|
host->sg = sg = sg_next(sg);
|
|
if (!sg)
|
|
goto done;
|
|
|
|
offset = 0;
|
|
buf = sg_virt(sg);
|
|
}
|
|
} else {
|
|
unsigned int remaining = sg->length - offset;
|
|
memcpy(buf + offset, &value, remaining);
|
|
nbytes += remaining;
|
|
|
|
flush_dcache_page(sg_page(sg));
|
|
host->sg = sg = sg_next(sg);
|
|
if (!sg)
|
|
goto done;
|
|
|
|
offset = 4 - remaining;
|
|
buf = sg_virt(sg);
|
|
memcpy(buf, (u8 *)&value + remaining, offset);
|
|
nbytes += offset;
|
|
}
|
|
|
|
status = mci_readl(host, SR);
|
|
if (status & ATMCI_DATA_ERROR_FLAGS) {
|
|
mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
|
|
| ATMCI_DATA_ERROR_FLAGS));
|
|
host->data_status = status;
|
|
atmci_set_pending(host, EVENT_DATA_ERROR);
|
|
tasklet_schedule(&host->tasklet);
|
|
break;
|
|
}
|
|
} while (status & MCI_RXRDY);
|
|
|
|
host->pio_offset = offset;
|
|
data->bytes_xfered += nbytes;
|
|
|
|
return;
|
|
|
|
done:
|
|
mci_writel(host, IDR, MCI_RXRDY);
|
|
mci_writel(host, IER, MCI_NOTBUSY);
|
|
data->bytes_xfered += nbytes;
|
|
atmci_set_completed(host, EVENT_XFER_COMPLETE);
|
|
if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
|
|
&& !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
|
|
send_stop_cmd(host->mmc, data);
|
|
}
|
|
|
|
static void atmci_write_data_pio(struct atmel_mci *host)
|
|
{
|
|
struct scatterlist *sg = host->sg;
|
|
void *buf = sg_virt(sg);
|
|
unsigned int offset = host->pio_offset;
|
|
struct mmc_data *data = host->data;
|
|
u32 value;
|
|
u32 status;
|
|
unsigned int nbytes = 0;
|
|
|
|
do {
|
|
if (likely(offset + 4 <= sg->length)) {
|
|
value = get_unaligned((u32 *)(buf + offset));
|
|
mci_writel(host, TDR, value);
|
|
|
|
offset += 4;
|
|
nbytes += 4;
|
|
if (offset == sg->length) {
|
|
host->sg = sg = sg_next(sg);
|
|
if (!sg)
|
|
goto done;
|
|
|
|
offset = 0;
|
|
buf = sg_virt(sg);
|
|
}
|
|
} else {
|
|
unsigned int remaining = sg->length - offset;
|
|
|
|
value = 0;
|
|
memcpy(&value, buf + offset, remaining);
|
|
nbytes += remaining;
|
|
|
|
host->sg = sg = sg_next(sg);
|
|
if (!sg) {
|
|
mci_writel(host, TDR, value);
|
|
goto done;
|
|
}
|
|
|
|
offset = 4 - remaining;
|
|
buf = sg_virt(sg);
|
|
memcpy((u8 *)&value + remaining, buf, offset);
|
|
mci_writel(host, TDR, value);
|
|
nbytes += offset;
|
|
}
|
|
|
|
status = mci_readl(host, SR);
|
|
if (status & ATMCI_DATA_ERROR_FLAGS) {
|
|
mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
|
|
| ATMCI_DATA_ERROR_FLAGS));
|
|
host->data_status = status;
|
|
atmci_set_pending(host, EVENT_DATA_ERROR);
|
|
tasklet_schedule(&host->tasklet);
|
|
break;
|
|
}
|
|
} while (status & MCI_TXRDY);
|
|
|
|
host->pio_offset = offset;
|
|
data->bytes_xfered += nbytes;
|
|
|
|
return;
|
|
|
|
done:
|
|
mci_writel(host, IDR, MCI_TXRDY);
|
|
mci_writel(host, IER, MCI_NOTBUSY);
|
|
data->bytes_xfered += nbytes;
|
|
atmci_set_completed(host, EVENT_XFER_COMPLETE);
|
|
if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
|
|
&& !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
|
|
send_stop_cmd(host->mmc, data);
|
|
}
|
|
|
|
static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
mci_writel(host, IDR, MCI_CMDRDY);
|
|
|
|
if (atmci_is_completed(host, EVENT_STOP_SENT)) {
|
|
host->stop_status = status;
|
|
atmci_set_pending(host, EVENT_STOP_COMPLETE);
|
|
} else {
|
|
host->cmd_status = status;
|
|
atmci_set_pending(host, EVENT_CMD_COMPLETE);
|
|
}
|
|
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
static irqreturn_t atmci_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mmc_host *mmc = dev_id;
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
u32 status, mask, pending;
|
|
unsigned int pass_count = 0;
|
|
|
|
spin_lock(&mmc->lock);
|
|
|
|
do {
|
|
status = mci_readl(host, SR);
|
|
mask = mci_readl(host, IMR);
|
|
pending = status & mask;
|
|
if (!pending)
|
|
break;
|
|
|
|
if (pending & ATMCI_DATA_ERROR_FLAGS) {
|
|
mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
|
|
| MCI_RXRDY | MCI_TXRDY);
|
|
pending &= mci_readl(host, IMR);
|
|
host->data_status = status;
|
|
atmci_set_pending(host, EVENT_DATA_ERROR);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
if (pending & MCI_NOTBUSY) {
|
|
mci_writel(host, IDR, (MCI_NOTBUSY
|
|
| ATMCI_DATA_ERROR_FLAGS));
|
|
atmci_set_pending(host, EVENT_DATA_COMPLETE);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
if (pending & MCI_RXRDY)
|
|
atmci_read_data_pio(host);
|
|
if (pending & MCI_TXRDY)
|
|
atmci_write_data_pio(host);
|
|
|
|
if (pending & MCI_CMDRDY)
|
|
atmci_cmd_interrupt(mmc, status);
|
|
} while (pass_count++ < 5);
|
|
|
|
spin_unlock(&mmc->lock);
|
|
|
|
return pass_count ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mmc_host *mmc = dev_id;
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
/*
|
|
* Disable interrupts until the pin has stabilized and check
|
|
* the state then. Use mod_timer() since we may be in the
|
|
* middle of the timer routine when this interrupt triggers.
|
|
*/
|
|
disable_irq_nosync(irq);
|
|
mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __init atmci_probe(struct platform_device *pdev)
|
|
{
|
|
struct mci_platform_data *pdata;
|
|
struct atmel_mci *host;
|
|
struct mmc_host *mmc;
|
|
struct resource *regs;
|
|
int irq;
|
|
int ret;
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!regs)
|
|
return -ENXIO;
|
|
pdata = pdev->dev.platform_data;
|
|
if (!pdata)
|
|
return -ENXIO;
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
|
|
if (!mmc)
|
|
return -ENOMEM;
|
|
|
|
host = mmc_priv(mmc);
|
|
host->pdev = pdev;
|
|
host->mmc = mmc;
|
|
host->detect_pin = pdata->detect_pin;
|
|
host->wp_pin = pdata->wp_pin;
|
|
|
|
host->mck = clk_get(&pdev->dev, "mci_clk");
|
|
if (IS_ERR(host->mck)) {
|
|
ret = PTR_ERR(host->mck);
|
|
goto err_clk_get;
|
|
}
|
|
|
|
ret = -ENOMEM;
|
|
host->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
if (!host->regs)
|
|
goto err_ioremap;
|
|
|
|
clk_enable(host->mck);
|
|
mci_writel(host, CR, MCI_CR_SWRST);
|
|
host->bus_hz = clk_get_rate(host->mck);
|
|
clk_disable(host->mck);
|
|
|
|
host->mapbase = regs->start;
|
|
|
|
mmc->ops = &atmci_ops;
|
|
mmc->f_min = (host->bus_hz + 511) / 512;
|
|
mmc->f_max = host->bus_hz / 2;
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
|
|
mmc->max_hw_segs = 64;
|
|
mmc->max_phys_segs = 64;
|
|
mmc->max_req_size = 32768 * 512;
|
|
mmc->max_blk_size = 32768;
|
|
mmc->max_blk_count = 512;
|
|
|
|
tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
|
|
|
|
ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc);
|
|
if (ret)
|
|
goto err_request_irq;
|
|
|
|
/* Assume card is present if we don't have a detect pin */
|
|
host->present = 1;
|
|
if (gpio_is_valid(host->detect_pin)) {
|
|
if (gpio_request(host->detect_pin, "mmc_detect")) {
|
|
dev_dbg(&mmc->class_dev, "no detect pin available\n");
|
|
host->detect_pin = -1;
|
|
} else {
|
|
host->present = !gpio_get_value(host->detect_pin);
|
|
}
|
|
}
|
|
if (gpio_is_valid(host->wp_pin)) {
|
|
if (gpio_request(host->wp_pin, "mmc_wp")) {
|
|
dev_dbg(&mmc->class_dev, "no WP pin available\n");
|
|
host->wp_pin = -1;
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
if (gpio_is_valid(host->detect_pin)) {
|
|
setup_timer(&host->detect_timer, atmci_detect_change,
|
|
(unsigned long)host);
|
|
|
|
ret = request_irq(gpio_to_irq(host->detect_pin),
|
|
atmci_detect_interrupt,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
"mmc-detect", mmc);
|
|
if (ret) {
|
|
dev_dbg(&mmc->class_dev,
|
|
"could not request IRQ %d for detect pin\n",
|
|
gpio_to_irq(host->detect_pin));
|
|
gpio_free(host->detect_pin);
|
|
host->detect_pin = -1;
|
|
}
|
|
}
|
|
|
|
dev_info(&mmc->class_dev,
|
|
"Atmel MCI controller at 0x%08lx irq %d\n",
|
|
host->mapbase, irq);
|
|
|
|
atmci_init_debugfs(host);
|
|
|
|
return 0;
|
|
|
|
err_request_irq:
|
|
iounmap(host->regs);
|
|
err_ioremap:
|
|
clk_put(host->mck);
|
|
err_clk_get:
|
|
mmc_free_host(mmc);
|
|
return ret;
|
|
}
|
|
|
|
static int __exit atmci_remove(struct platform_device *pdev)
|
|
{
|
|
struct atmel_mci *host = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
if (host) {
|
|
/* Debugfs stuff is cleaned up by mmc core */
|
|
|
|
if (gpio_is_valid(host->detect_pin)) {
|
|
int pin = host->detect_pin;
|
|
|
|
/* Make sure the timer doesn't enable the interrupt */
|
|
host->detect_pin = -1;
|
|
smp_wmb();
|
|
|
|
free_irq(gpio_to_irq(pin), host->mmc);
|
|
del_timer_sync(&host->detect_timer);
|
|
gpio_free(pin);
|
|
}
|
|
|
|
mmc_remove_host(host->mmc);
|
|
|
|
clk_enable(host->mck);
|
|
mci_writel(host, IDR, ~0UL);
|
|
mci_writel(host, CR, MCI_CR_MCIDIS);
|
|
mci_readl(host, SR);
|
|
clk_disable(host->mck);
|
|
|
|
if (gpio_is_valid(host->wp_pin))
|
|
gpio_free(host->wp_pin);
|
|
|
|
free_irq(platform_get_irq(pdev, 0), host->mmc);
|
|
iounmap(host->regs);
|
|
|
|
clk_put(host->mck);
|
|
|
|
mmc_free_host(host->mmc);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver atmci_driver = {
|
|
.remove = __exit_p(atmci_remove),
|
|
.driver = {
|
|
.name = "atmel_mci",
|
|
},
|
|
};
|
|
|
|
static int __init atmci_init(void)
|
|
{
|
|
return platform_driver_probe(&atmci_driver, atmci_probe);
|
|
}
|
|
|
|
static void __exit atmci_exit(void)
|
|
{
|
|
platform_driver_unregister(&atmci_driver);
|
|
}
|
|
|
|
module_init(atmci_init);
|
|
module_exit(atmci_exit);
|
|
|
|
MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
|
|
MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
|
|
MODULE_LICENSE("GPL v2");
|