5be36d22b2
- add platform device resources in board files - add new bfin_sir.h to each machines Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
665 lines
16 KiB
C
665 lines
16 KiB
C
/*
|
|
* File: arch/blackfin/mach-bf548/boards/cm_bf548.c
|
|
* Based on: arch/blackfin/mach-bf537/boards/ezkit.c
|
|
* Author: Aidan Williams <aidan@nicta.com.au>
|
|
*
|
|
* Created:
|
|
* Description:
|
|
*
|
|
* Modified:
|
|
* Copyright 2005 National ICT Australia (NICTA)
|
|
* Copyright 2004-2008 Analog Devices Inc.
|
|
*
|
|
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see the file COPYING, or write
|
|
* to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/usb/musb.h>
|
|
#include <asm/bfin5xx_spi.h>
|
|
#include <asm/cplb.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/nand.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/mach/bf54x_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/spi/ad7877.h>
|
|
|
|
/*
|
|
* Name the Board for the /proc/cpuinfo
|
|
*/
|
|
const char bfin_board_name[] = "Bluetechnix CM-BF548";
|
|
|
|
/*
|
|
* Driver needs to know address, irq and flag pin.
|
|
*/
|
|
|
|
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
|
|
|
|
#include <asm/mach/bf54x-lq043.h>
|
|
|
|
static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
|
|
.width = 480,
|
|
.height = 272,
|
|
.xres = {480, 480, 480},
|
|
.yres = {272, 272, 272},
|
|
.bpp = {24, 24, 24},
|
|
.disp = GPIO_PE3,
|
|
};
|
|
|
|
static struct resource bf54x_lq043_resources[] = {
|
|
{
|
|
.start = IRQ_EPPI0_ERR,
|
|
.end = IRQ_EPPI0_ERR,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device bf54x_lq043_device = {
|
|
.name = "bf54x-lq043",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(bf54x_lq043_resources),
|
|
.resource = bf54x_lq043_resources,
|
|
.dev = {
|
|
.platform_data = &bf54x_lq043_data,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
|
|
static unsigned int bf548_keymap[] = {
|
|
KEYVAL(0, 0, KEY_ENTER),
|
|
KEYVAL(0, 1, KEY_HELP),
|
|
KEYVAL(0, 2, KEY_0),
|
|
KEYVAL(0, 3, KEY_BACKSPACE),
|
|
KEYVAL(1, 0, KEY_TAB),
|
|
KEYVAL(1, 1, KEY_9),
|
|
KEYVAL(1, 2, KEY_8),
|
|
KEYVAL(1, 3, KEY_7),
|
|
KEYVAL(2, 0, KEY_DOWN),
|
|
KEYVAL(2, 1, KEY_6),
|
|
KEYVAL(2, 2, KEY_5),
|
|
KEYVAL(2, 3, KEY_4),
|
|
KEYVAL(3, 0, KEY_UP),
|
|
KEYVAL(3, 1, KEY_3),
|
|
KEYVAL(3, 2, KEY_2),
|
|
KEYVAL(3, 3, KEY_1),
|
|
};
|
|
|
|
static struct bfin_kpad_platform_data bf54x_kpad_data = {
|
|
.rows = 4,
|
|
.cols = 4,
|
|
.keymap = bf548_keymap,
|
|
.keymapsize = ARRAY_SIZE(bf548_keymap),
|
|
.repeat = 0,
|
|
.debounce_time = 5000, /* ns (5ms) */
|
|
.coldrive_time = 1000, /* ns (1ms) */
|
|
.keyup_test_interval = 50, /* ms (50ms) */
|
|
};
|
|
|
|
static struct resource bf54x_kpad_resources[] = {
|
|
{
|
|
.start = IRQ_KEY,
|
|
.end = IRQ_KEY,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device bf54x_kpad_device = {
|
|
.name = "bf54x-keys",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(bf54x_kpad_resources),
|
|
.resource = bf54x_kpad_resources,
|
|
.dev = {
|
|
.platform_data = &bf54x_kpad_data,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
|
|
static struct platform_device rtc_device = {
|
|
.name = "rtc-bfin",
|
|
.id = -1,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
|
|
static struct resource bfin_uart_resources[] = {
|
|
#ifdef CONFIG_SERIAL_BFIN_UART0
|
|
{
|
|
.start = 0xFFC00400,
|
|
.end = 0xFFC004FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_UART1
|
|
{
|
|
.start = 0xFFC02000,
|
|
.end = 0xFFC020FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_UART2
|
|
{
|
|
.start = 0xFFC02100,
|
|
.end = 0xFFC021FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_BFIN_UART3
|
|
{
|
|
.start = 0xFFC03100,
|
|
.end = 0xFFC031FF,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct platform_device bfin_uart_device = {
|
|
.name = "bfin-uart",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(bfin_uart_resources),
|
|
.resource = bfin_uart_resources,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
|
|
static struct resource bfin_sir_resources[] = {
|
|
#ifdef CONFIG_BFIN_SIR0
|
|
{
|
|
.start = 0xFFC00400,
|
|
.end = 0xFFC004FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_BFIN_SIR1
|
|
{
|
|
.start = 0xFFC02000,
|
|
.end = 0xFFC020FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_BFIN_SIR2
|
|
{
|
|
.start = 0xFFC02100,
|
|
.end = 0xFFC021FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_BFIN_SIR3
|
|
{
|
|
.start = 0xFFC03100,
|
|
.end = 0xFFC031FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct platform_device bfin_sir_device = {
|
|
.name = "bfin_sir",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bfin_sir_resources),
|
|
.resource = bfin_sir_resources,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
|
|
static struct resource smsc911x_resources[] = {
|
|
{
|
|
.name = "smsc911x-memory",
|
|
.start = 0x24000000,
|
|
.end = 0x24000000 + 0xFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_PE6,
|
|
.end = IRQ_PE6,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
|
|
},
|
|
};
|
|
static struct platform_device smsc911x_device = {
|
|
.name = "smsc911x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smsc911x_resources),
|
|
.resource = smsc911x_resources,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
|
|
static struct resource musb_resources[] = {
|
|
[0] = {
|
|
.start = 0xFFC03C00,
|
|
.end = 0xFFC040FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = { /* general IRQ */
|
|
.start = IRQ_USB_INT0,
|
|
.end = IRQ_USB_INT0,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
|
},
|
|
[2] = { /* DMA IRQ */
|
|
.start = IRQ_USB_DMA,
|
|
.end = IRQ_USB_DMA,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
|
},
|
|
};
|
|
|
|
static struct musb_hdrc_platform_data musb_plat = {
|
|
#if defined(CONFIG_USB_MUSB_OTG)
|
|
.mode = MUSB_OTG,
|
|
#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
|
|
.mode = MUSB_HOST,
|
|
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
|
|
.mode = MUSB_PERIPHERAL,
|
|
#endif
|
|
.multipoint = 0,
|
|
};
|
|
|
|
static u64 musb_dmamask = ~(u32)0;
|
|
|
|
static struct platform_device musb_device = {
|
|
.name = "musb_hdrc",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &musb_dmamask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
.platform_data = &musb_plat,
|
|
},
|
|
.num_resources = ARRAY_SIZE(musb_resources),
|
|
.resource = musb_resources,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
|
|
static struct resource bfin_atapi_resources[] = {
|
|
{
|
|
.start = 0xFFC03800,
|
|
.end = 0xFFC0386F,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_ATAPI_ERR,
|
|
.end = IRQ_ATAPI_ERR,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device bfin_atapi_device = {
|
|
.name = "pata-bf54x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(bfin_atapi_resources),
|
|
.resource = bfin_atapi_resources,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
|
|
static struct mtd_partition partition_info[] = {
|
|
{
|
|
.name = "Linux Kernel",
|
|
.offset = 0,
|
|
.size = 4 * SIZE_1M,
|
|
},
|
|
{
|
|
.name = "File System",
|
|
.offset = 4 * SIZE_1M,
|
|
.size = (256 - 4) * SIZE_1M,
|
|
},
|
|
};
|
|
|
|
static struct bf5xx_nand_platform bf5xx_nand_platform = {
|
|
.page_size = NFC_PG_SIZE_256,
|
|
.data_width = NFC_NWIDTH_8,
|
|
.partitions = partition_info,
|
|
.nr_partitions = ARRAY_SIZE(partition_info),
|
|
.rd_dly = 3,
|
|
.wr_dly = 3,
|
|
};
|
|
|
|
static struct resource bf5xx_nand_resources[] = {
|
|
{
|
|
.start = 0xFFC03B00,
|
|
.end = 0xFFC03B4F,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = CH_NFC,
|
|
.end = CH_NFC,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device bf5xx_nand_device = {
|
|
.name = "bf5xx-nand",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
|
|
.resource = bf5xx_nand_resources,
|
|
.dev = {
|
|
.platform_data = &bf5xx_nand_platform,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
|
|
static struct platform_device bf54x_sdh_device = {
|
|
.name = "bfin-sdh",
|
|
.id = 0,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
|
/* all SPI peripherals info goes here */
|
|
#if defined(CONFIG_MTD_M25P80) \
|
|
|| defined(CONFIG_MTD_M25P80_MODULE)
|
|
/* SPI flash chip (m25p16) */
|
|
static struct mtd_partition bfin_spi_flash_partitions[] = {
|
|
{
|
|
.name = "bootloader",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_CAP_ROM
|
|
}, {
|
|
.name = "linux kernel",
|
|
.size = 0x1c0000,
|
|
.offset = 0x40000
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data bfin_spi_flash_data = {
|
|
.name = "m25p80",
|
|
.parts = bfin_spi_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
|
|
.type = "m25p16",
|
|
};
|
|
|
|
static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
|
.enable_dma = 0, /* use dma transfer with this chip*/
|
|
.bits_per_word = 8,
|
|
.cs_change_per_word = 0,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
|
|
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
|
|
.cs_change_per_word = 0,
|
|
.enable_dma = 0,
|
|
.bits_per_word = 16,
|
|
};
|
|
|
|
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
|
|
.model = 7877,
|
|
.vref_delay_usecs = 50, /* internal, no capacitor */
|
|
.x_plate_ohms = 419,
|
|
.y_plate_ohms = 486,
|
|
.pressure_max = 1000,
|
|
.pressure_min = 0,
|
|
.stopacq_polarity = 1,
|
|
.first_conversion_delay = 3,
|
|
.acquisition_time = 1,
|
|
.averaging = 1,
|
|
.pen_down_acc_interval = 1,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
|
|
static struct bfin5xx_spi_chip spidev_chip_info = {
|
|
.enable_dma = 0,
|
|
.bits_per_word = 8,
|
|
};
|
|
#endif
|
|
|
|
static struct spi_board_info bf54x_spi_board_info[] __initdata = {
|
|
#if defined(CONFIG_MTD_M25P80) \
|
|
|| defined(CONFIG_MTD_M25P80_MODULE)
|
|
{
|
|
/* the modalias must be the same as spi device driver name */
|
|
.modalias = "m25p80", /* Name of spi_driver for this device */
|
|
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
|
|
.bus_num = 0, /* Framework bus number */
|
|
.chip_select = 1, /* SPI_SSEL1*/
|
|
.platform_data = &bfin_spi_flash_data,
|
|
.controller_data = &spi_flash_chip_info,
|
|
.mode = SPI_MODE_3,
|
|
},
|
|
#endif
|
|
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
|
|
{
|
|
.modalias = "ad7877",
|
|
.platform_data = &bfin_ad7877_ts_info,
|
|
.irq = IRQ_PJ11,
|
|
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
|
|
.bus_num = 0,
|
|
.chip_select = 2,
|
|
.controller_data = &spi_ad7877_chip_info,
|
|
},
|
|
#endif
|
|
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
|
|
{
|
|
.modalias = "spidev",
|
|
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.controller_data = &spidev_chip_info,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
/* SPI (0) */
|
|
static struct resource bfin_spi0_resource[] = {
|
|
[0] = {
|
|
.start = SPI0_REGBASE,
|
|
.end = SPI0_REGBASE + 0xFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = CH_SPI0,
|
|
.end = CH_SPI0,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
/* SPI (1) */
|
|
static struct resource bfin_spi1_resource[] = {
|
|
[0] = {
|
|
.start = SPI1_REGBASE,
|
|
.end = SPI1_REGBASE + 0xFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = CH_SPI1,
|
|
.end = CH_SPI1,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
/* SPI controller data */
|
|
static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
|
|
.num_chipselect = 8,
|
|
.enable_dma = 1, /* master has the ability to do dma transfer */
|
|
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
|
|
};
|
|
|
|
static struct platform_device bf54x_spi_master0 = {
|
|
.name = "bfin-spi",
|
|
.id = 0, /* Bus number */
|
|
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
|
|
.resource = bfin_spi0_resource,
|
|
.dev = {
|
|
.platform_data = &bf54x_spi_master_info0, /* Passed to driver */
|
|
},
|
|
};
|
|
|
|
static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
|
|
.num_chipselect = 8,
|
|
.enable_dma = 1, /* master has the ability to do dma transfer */
|
|
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
|
|
};
|
|
|
|
static struct platform_device bf54x_spi_master1 = {
|
|
.name = "bfin-spi",
|
|
.id = 1, /* Bus number */
|
|
.num_resources = ARRAY_SIZE(bfin_spi1_resource),
|
|
.resource = bfin_spi1_resource,
|
|
.dev = {
|
|
.platform_data = &bf54x_spi_master_info1, /* Passed to driver */
|
|
},
|
|
};
|
|
#endif /* spi master and devices */
|
|
|
|
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
|
|
static struct resource bfin_twi0_resource[] = {
|
|
[0] = {
|
|
.start = TWI0_REGBASE,
|
|
.end = TWI0_REGBASE + 0xFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_TWI0,
|
|
.end = IRQ_TWI0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device i2c_bfin_twi0_device = {
|
|
.name = "i2c-bfin-twi",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bfin_twi0_resource),
|
|
.resource = bfin_twi0_resource,
|
|
};
|
|
|
|
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
|
|
static struct resource bfin_twi1_resource[] = {
|
|
[0] = {
|
|
.start = TWI1_REGBASE,
|
|
.end = TWI1_REGBASE + 0xFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_TWI1,
|
|
.end = IRQ_TWI1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device i2c_bfin_twi1_device = {
|
|
.name = "i2c-bfin-twi",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(bfin_twi1_resource),
|
|
.resource = bfin_twi1_resource,
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
#include <linux/gpio_keys.h>
|
|
|
|
static struct gpio_keys_button bfin_gpio_keys_table[] = {
|
|
{BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data bfin_gpio_keys_data = {
|
|
.buttons = bfin_gpio_keys_table,
|
|
.nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
|
|
};
|
|
|
|
static struct platform_device bfin_device_gpiokeys = {
|
|
.name = "gpio-keys",
|
|
.dev = {
|
|
.platform_data = &bfin_gpio_keys_data,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
static struct platform_device *cm_bf548_devices[] __initdata = {
|
|
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
|
|
&rtc_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
|
|
&bfin_uart_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
|
|
&bfin_sir_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
|
|
&bf54x_lq043_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
|
|
&smsc911x_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
|
|
&musb_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
|
|
&bfin_atapi_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
|
|
&bf5xx_nand_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
|
|
&bf54x_sdh_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
|
&bf54x_spi_master0,
|
|
&bf54x_spi_master1,
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
|
|
&bf54x_kpad_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
|
|
/* &i2c_bfin_twi0_device, */
|
|
#if !defined(CONFIG_BF542)
|
|
&i2c_bfin_twi1_device,
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
&bfin_device_gpiokeys,
|
|
#endif
|
|
};
|
|
|
|
static int __init cm_bf548_init(void)
|
|
{
|
|
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
|
|
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
|
|
|
|
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
|
spi_register_board_info(bf54x_spi_board_info,
|
|
ARRAY_SIZE(bf54x_spi_board_info));
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(cm_bf548_init);
|