Magnus Damm 657bf0bd06 sh: LCDC start_transfer() for the KFR2R09 board ... This patch adds a ->start_transfer() callback to the KFR2R09 lcd handling code. The callback is used to notify the lcd controller that a new frame of data is about to be transferred. The callback is only used in combination with deferred io, but the code has been tested both with and without deferred io enabled. Without this patch the display data on the KFR2R09 lcd panel becomes corrupted over time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>		2009-12-09 12:40:45 +09:00
..
mach-ap325rxa	sh: Add SDHI1 support to the AP325RXA board	2009-11-02 14:19:28 +09:00
mach-cayman	sh: Move out cayman-specific panic handler code to its own file.	2009-05-08 17:41:59 +09:00
mach-dreamcast	sh: magicpanelr2 and dreamcast can use the generic I/O base.	2009-09-28 15:22:10 +09:00
mach-ecovec24	sh: mach-ecovec24: LCDC drive ability become high	2009-12-04 13:42:32 +09:00
mach-edosk7705	sh: mach-edosk7705: Fix up edosk7705 so it all builds again.	2008-12-22 18:44:45 +09:00
mach-highlander	sh: Make sure indexes are positive	2009-11-04 11:48:07 +09:00
mach-hp6xx	sh: fix the HD64461 level-triggered interrupts handling	2009-03-20 18:57:48 +09:00
mach-kfr2r09	sh: LCDC start_transfer() for the KFR2R09 board	2009-12-09 12:40:45 +09:00
mach-landisk	sh: Remove BKL from landisk gio.	2009-10-16 14:42:33 +09:00
mach-lboxre2	sh: Migrate common board headers to mach-common/.	2008-10-20 13:02:48 +09:00
mach-microdev	sh: mach-microdev: Split out the fdc37c93xapm initialization code.	2008-12-22 18:44:45 +09:00
mach-migor	sh: Move KEYSC header file	2009-11-30 12:02:51 +09:00
mach-r2d	sh: Make sure indexes are positive	2009-11-04 11:48:07 +09:00
mach-rsk	sh: rsk7203 CONFIG_MTD=n fix	2009-10-26 19:46:24 +09:00
mach-sdk7780	sh: Migrate common board headers to mach-common/.	2008-10-20 13:02:48 +09:00
mach-se	sh: Move KEYSC header file	2009-11-30 12:02:51 +09:00
mach-sh03	sh: mach-sh03: Give the sh03 rtc its own spinlock.	2009-05-08 16:57:35 +09:00
mach-sh7763rdp	sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp	2009-03-17 15:20:59 +09:00
mach-snapgear	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-systemh	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-titan	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-x3proto	usb: m66592-udc platform data on_chip support	2009-07-23 13:04:15 +09:00
board-edosk7760.c	sh: edosk7760: Correct size of bootloader flash partition.	2008-09-21 10:32:29 +09:00
board-espt.c	sh: espt-giga board support	2009-03-17 15:18:52 +09:00
board-magicpanelr2.c	sh: magicpanelr2 and dreamcast can use the generic I/O base.	2009-09-28 15:22:10 +09:00
board-polaris.c	sh: add support for SMSC Polaris platform	2009-03-21 01:26:33 +09:00
board-sh7785lcr.c	sh: Fix up build warning for SH7785LCR proto board.	2009-09-01 22:38:27 +09:00
board-shmin.c	sh: board-shmin: Convert shmin to use __set_io_port_base().	2008-12-22 18:44:45 +09:00
board-urquell.c	sh: urquell: Add system FPGA mode pin support.	2009-06-15 19:02:37 +09:00
Kconfig	sh: disable trapped I/O on SH7785LCR.	2009-09-01 22:37:10 +09:00
Makefile	sh: Move ap325rxa board code into separate directory	2009-10-30 14:33:43 +09:00