0cd61b68c3
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
352 lines
7.2 KiB
C
352 lines
7.2 KiB
C
/*
|
|
* linux/arch/arm/mach-sa1100/irq.c
|
|
*
|
|
* Copyright (C) 1999-2001 Nicolas Pitre
|
|
*
|
|
* Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/sysdev.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
/*
|
|
* SA1100 GPIO edge detection for IRQs:
|
|
* IRQs are generated on Falling-Edge, Rising-Edge, or both.
|
|
* Use this instead of directly setting GRER/GFER.
|
|
*/
|
|
static int GPIO_IRQ_rising_edge;
|
|
static int GPIO_IRQ_falling_edge;
|
|
static int GPIO_IRQ_mask = (1 << 11) - 1;
|
|
|
|
/*
|
|
* To get the GPIO number from an IRQ number
|
|
*/
|
|
#define GPIO_11_27_IRQ(i) ((i) - 21)
|
|
#define GPIO11_27_MASK(irq) (1 << GPIO_11_27_IRQ(irq))
|
|
|
|
static int sa1100_gpio_type(unsigned int irq, unsigned int type)
|
|
{
|
|
unsigned int mask;
|
|
|
|
if (irq <= 10)
|
|
mask = 1 << irq;
|
|
else
|
|
mask = GPIO11_27_MASK(irq);
|
|
|
|
if (type == IRQT_PROBE) {
|
|
if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
|
|
return 0;
|
|
type = __IRQT_RISEDGE | __IRQT_FALEDGE;
|
|
}
|
|
|
|
if (type & __IRQT_RISEDGE) {
|
|
GPIO_IRQ_rising_edge |= mask;
|
|
} else
|
|
GPIO_IRQ_rising_edge &= ~mask;
|
|
if (type & __IRQT_FALEDGE) {
|
|
GPIO_IRQ_falling_edge |= mask;
|
|
} else
|
|
GPIO_IRQ_falling_edge &= ~mask;
|
|
|
|
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
|
|
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* GPIO IRQs must be acknowledged. This is for IRQs from 0 to 10.
|
|
*/
|
|
static void sa1100_low_gpio_ack(unsigned int irq)
|
|
{
|
|
GEDR = (1 << irq);
|
|
}
|
|
|
|
static void sa1100_low_gpio_mask(unsigned int irq)
|
|
{
|
|
ICMR &= ~(1 << irq);
|
|
}
|
|
|
|
static void sa1100_low_gpio_unmask(unsigned int irq)
|
|
{
|
|
ICMR |= 1 << irq;
|
|
}
|
|
|
|
static int sa1100_low_gpio_wake(unsigned int irq, unsigned int on)
|
|
{
|
|
if (on)
|
|
PWER |= 1 << irq;
|
|
else
|
|
PWER &= ~(1 << irq);
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip sa1100_low_gpio_chip = {
|
|
.name = "GPIO-l",
|
|
.ack = sa1100_low_gpio_ack,
|
|
.mask = sa1100_low_gpio_mask,
|
|
.unmask = sa1100_low_gpio_unmask,
|
|
.set_type = sa1100_gpio_type,
|
|
.set_wake = sa1100_low_gpio_wake,
|
|
};
|
|
|
|
/*
|
|
* IRQ11 (GPIO11 through 27) handler. We enter here with the
|
|
* irq_controller_lock held, and IRQs disabled. Decode the IRQ
|
|
* and call the handler.
|
|
*/
|
|
static void
|
|
sa1100_high_gpio_handler(unsigned int irq, struct irqdesc *desc)
|
|
{
|
|
unsigned int mask;
|
|
|
|
mask = GEDR & 0xfffff800;
|
|
do {
|
|
/*
|
|
* clear down all currently active IRQ sources.
|
|
* We will be processing them all.
|
|
*/
|
|
GEDR = mask;
|
|
|
|
irq = IRQ_GPIO11;
|
|
desc = irq_desc + irq;
|
|
mask >>= 11;
|
|
do {
|
|
if (mask & 1)
|
|
desc_handle_irq(irq, desc);
|
|
mask >>= 1;
|
|
irq++;
|
|
desc++;
|
|
} while (mask);
|
|
|
|
mask = GEDR & 0xfffff800;
|
|
} while (mask);
|
|
}
|
|
|
|
/*
|
|
* Like GPIO0 to 10, GPIO11-27 IRQs need to be handled specially.
|
|
* In addition, the IRQs are all collected up into one bit in the
|
|
* interrupt controller registers.
|
|
*/
|
|
static void sa1100_high_gpio_ack(unsigned int irq)
|
|
{
|
|
unsigned int mask = GPIO11_27_MASK(irq);
|
|
|
|
GEDR = mask;
|
|
}
|
|
|
|
static void sa1100_high_gpio_mask(unsigned int irq)
|
|
{
|
|
unsigned int mask = GPIO11_27_MASK(irq);
|
|
|
|
GPIO_IRQ_mask &= ~mask;
|
|
|
|
GRER &= ~mask;
|
|
GFER &= ~mask;
|
|
}
|
|
|
|
static void sa1100_high_gpio_unmask(unsigned int irq)
|
|
{
|
|
unsigned int mask = GPIO11_27_MASK(irq);
|
|
|
|
GPIO_IRQ_mask |= mask;
|
|
|
|
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
|
|
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
|
|
}
|
|
|
|
static int sa1100_high_gpio_wake(unsigned int irq, unsigned int on)
|
|
{
|
|
if (on)
|
|
PWER |= GPIO11_27_MASK(irq);
|
|
else
|
|
PWER &= ~GPIO11_27_MASK(irq);
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip sa1100_high_gpio_chip = {
|
|
.name = "GPIO-h",
|
|
.ack = sa1100_high_gpio_ack,
|
|
.mask = sa1100_high_gpio_mask,
|
|
.unmask = sa1100_high_gpio_unmask,
|
|
.set_type = sa1100_gpio_type,
|
|
.set_wake = sa1100_high_gpio_wake,
|
|
};
|
|
|
|
/*
|
|
* We don't need to ACK IRQs on the SA1100 unless they're GPIOs
|
|
* this is for internal IRQs i.e. from 11 to 31.
|
|
*/
|
|
static void sa1100_mask_irq(unsigned int irq)
|
|
{
|
|
ICMR &= ~(1 << irq);
|
|
}
|
|
|
|
static void sa1100_unmask_irq(unsigned int irq)
|
|
{
|
|
ICMR |= (1 << irq);
|
|
}
|
|
|
|
/*
|
|
* Apart form GPIOs, only the RTC alarm can be a wakeup event.
|
|
*/
|
|
static int sa1100_set_wake(unsigned int irq, unsigned int on)
|
|
{
|
|
if (irq == IRQ_RTCAlrm) {
|
|
if (on)
|
|
PWER |= PWER_RTC;
|
|
else
|
|
PWER &= ~PWER_RTC;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct irq_chip sa1100_normal_chip = {
|
|
.name = "SC",
|
|
.ack = sa1100_mask_irq,
|
|
.mask = sa1100_mask_irq,
|
|
.unmask = sa1100_unmask_irq,
|
|
.set_wake = sa1100_set_wake,
|
|
};
|
|
|
|
static struct resource irq_resource = {
|
|
.name = "irqs",
|
|
.start = 0x90050000,
|
|
.end = 0x9005ffff,
|
|
};
|
|
|
|
static struct sa1100irq_state {
|
|
unsigned int saved;
|
|
unsigned int icmr;
|
|
unsigned int iclr;
|
|
unsigned int iccr;
|
|
} sa1100irq_state;
|
|
|
|
static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state)
|
|
{
|
|
struct sa1100irq_state *st = &sa1100irq_state;
|
|
|
|
st->saved = 1;
|
|
st->icmr = ICMR;
|
|
st->iclr = ICLR;
|
|
st->iccr = ICCR;
|
|
|
|
/*
|
|
* Disable all GPIO-based interrupts.
|
|
*/
|
|
ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
|
|
IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
|
|
IC_GPIO1|IC_GPIO0);
|
|
|
|
/*
|
|
* Set the appropriate edges for wakeup.
|
|
*/
|
|
GRER = PWER & GPIO_IRQ_rising_edge;
|
|
GFER = PWER & GPIO_IRQ_falling_edge;
|
|
|
|
/*
|
|
* Clear any pending GPIO interrupts.
|
|
*/
|
|
GEDR = GEDR;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100irq_resume(struct sys_device *dev)
|
|
{
|
|
struct sa1100irq_state *st = &sa1100irq_state;
|
|
|
|
if (st->saved) {
|
|
ICCR = st->iccr;
|
|
ICLR = st->iclr;
|
|
|
|
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
|
|
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
|
|
|
|
ICMR = st->icmr;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct sysdev_class sa1100irq_sysclass = {
|
|
set_kset_name("sa11x0-irq"),
|
|
.suspend = sa1100irq_suspend,
|
|
.resume = sa1100irq_resume,
|
|
};
|
|
|
|
static struct sys_device sa1100irq_device = {
|
|
.id = 0,
|
|
.cls = &sa1100irq_sysclass,
|
|
};
|
|
|
|
static int __init sa1100irq_init_devicefs(void)
|
|
{
|
|
sysdev_class_register(&sa1100irq_sysclass);
|
|
return sysdev_register(&sa1100irq_device);
|
|
}
|
|
|
|
device_initcall(sa1100irq_init_devicefs);
|
|
|
|
void __init sa1100_init_irq(void)
|
|
{
|
|
unsigned int irq;
|
|
|
|
request_resource(&iomem_resource, &irq_resource);
|
|
|
|
/* disable all IRQs */
|
|
ICMR = 0;
|
|
|
|
/* all IRQs are IRQ, not FIQ */
|
|
ICLR = 0;
|
|
|
|
/* clear all GPIO edge detects */
|
|
GFER = 0;
|
|
GRER = 0;
|
|
GEDR = -1;
|
|
|
|
/*
|
|
* Whatever the doc says, this has to be set for the wait-on-irq
|
|
* instruction to work... on a SA1100 rev 9 at least.
|
|
*/
|
|
ICCR = 1;
|
|
|
|
for (irq = 0; irq <= 10; irq++) {
|
|
set_irq_chip(irq, &sa1100_low_gpio_chip);
|
|
set_irq_handler(irq, do_edge_IRQ);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
|
|
for (irq = 12; irq <= 31; irq++) {
|
|
set_irq_chip(irq, &sa1100_normal_chip);
|
|
set_irq_handler(irq, do_level_IRQ);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
|
|
for (irq = 32; irq <= 48; irq++) {
|
|
set_irq_chip(irq, &sa1100_high_gpio_chip);
|
|
set_irq_handler(irq, do_edge_IRQ);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
|
|
/*
|
|
* Install handler for GPIO 11-27 edge detect interrupts
|
|
*/
|
|
set_irq_chip(IRQ_GPIO11_27, &sa1100_normal_chip);
|
|
set_irq_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler);
|
|
}
|