5cedae9ca7
The ARM Architecture Reference Manual lists bit 4 of the PMD as "implementation defined" and it must be set to zero on Intel XScale CPUs or the cache does not behave properly. Found by Mike Rapoport while debugging a flash issue on the PXA255: http://marc.10east.com/?l=linux-arm-kernel&m=114845287600782&w=1 Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
453 lines
11 KiB
C
453 lines
11 KiB
C
#ifndef __ASM_ARM_SYSTEM_H
|
|
#define __ASM_ARM_SYSTEM_H
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <linux/config.h>
|
|
|
|
#define CPU_ARCH_UNKNOWN 0
|
|
#define CPU_ARCH_ARMv3 1
|
|
#define CPU_ARCH_ARMv4 2
|
|
#define CPU_ARCH_ARMv4T 3
|
|
#define CPU_ARCH_ARMv5 4
|
|
#define CPU_ARCH_ARMv5T 5
|
|
#define CPU_ARCH_ARMv5TE 6
|
|
#define CPU_ARCH_ARMv5TEJ 7
|
|
#define CPU_ARCH_ARMv6 8
|
|
|
|
/*
|
|
* CR1 bits (CP#15 CR1)
|
|
*/
|
|
#define CR_M (1 << 0) /* MMU enable */
|
|
#define CR_A (1 << 1) /* Alignment abort enable */
|
|
#define CR_C (1 << 2) /* Dcache enable */
|
|
#define CR_W (1 << 3) /* Write buffer enable */
|
|
#define CR_P (1 << 4) /* 32-bit exception handler */
|
|
#define CR_D (1 << 5) /* 32-bit data address range */
|
|
#define CR_L (1 << 6) /* Implementation defined */
|
|
#define CR_B (1 << 7) /* Big endian */
|
|
#define CR_S (1 << 8) /* System MMU protection */
|
|
#define CR_R (1 << 9) /* ROM MMU protection */
|
|
#define CR_F (1 << 10) /* Implementation defined */
|
|
#define CR_Z (1 << 11) /* Implementation defined */
|
|
#define CR_I (1 << 12) /* Icache enable */
|
|
#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */
|
|
#define CR_RR (1 << 14) /* Round Robin cache replacement */
|
|
#define CR_L4 (1 << 15) /* LDR pc can set T bit */
|
|
#define CR_DT (1 << 16)
|
|
#define CR_IT (1 << 18)
|
|
#define CR_ST (1 << 19)
|
|
#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */
|
|
#define CR_U (1 << 22) /* Unaligned access operation */
|
|
#define CR_XP (1 << 23) /* Extended page tables */
|
|
#define CR_VE (1 << 24) /* Vectored interrupts */
|
|
|
|
#define CPUID_ID 0
|
|
#define CPUID_CACHETYPE 1
|
|
#define CPUID_TCM 2
|
|
#define CPUID_TLBTYPE 3
|
|
|
|
#define read_cpuid(reg) \
|
|
({ \
|
|
unsigned int __val; \
|
|
asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
|
|
: "=r" (__val) \
|
|
: \
|
|
: "cc"); \
|
|
__val; \
|
|
})
|
|
|
|
/*
|
|
* This is used to ensure the compiler did actually allocate the register we
|
|
* asked it for some inline assembly sequences. Apparently we can't trust
|
|
* the compiler from one version to another so a bit of paranoia won't hurt.
|
|
* This string is meant to be concatenated with the inline asm string and
|
|
* will cause compilation to stop on mismatch.
|
|
* (for details, see gcc PR 15089)
|
|
*/
|
|
#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
struct thread_info;
|
|
struct task_struct;
|
|
|
|
/* information about the system we're running on */
|
|
extern unsigned int system_rev;
|
|
extern unsigned int system_serial_low;
|
|
extern unsigned int system_serial_high;
|
|
extern unsigned int mem_fclk_21285;
|
|
|
|
struct pt_regs;
|
|
|
|
void die(const char *msg, struct pt_regs *regs, int err)
|
|
__attribute__((noreturn));
|
|
|
|
struct siginfo;
|
|
void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
|
|
unsigned long err, unsigned long trap);
|
|
|
|
void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
|
|
struct pt_regs *),
|
|
int sig, const char *name);
|
|
|
|
#define xchg(ptr,x) \
|
|
((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
|
|
|
|
#define tas(ptr) (xchg((ptr),1))
|
|
|
|
extern asmlinkage void __backtrace(void);
|
|
extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
|
|
|
|
struct mm_struct;
|
|
extern void show_pte(struct mm_struct *mm, unsigned long addr);
|
|
extern void __show_regs(struct pt_regs *);
|
|
|
|
extern int cpu_architecture(void);
|
|
extern void cpu_init(void);
|
|
|
|
/*
|
|
* Intel's XScale3 core supports some v6 features (supersections, L2)
|
|
* but advertises itself as v5 as it does not support the v6 ISA. For
|
|
* this reason, we need a way to explicitly test for this type of CPU.
|
|
*/
|
|
#ifndef CONFIG_CPU_XSC3
|
|
#define cpu_is_xsc3() 0
|
|
#else
|
|
static inline int cpu_is_xsc3(void)
|
|
{
|
|
extern unsigned int processor_id;
|
|
|
|
if ((processor_id & 0xffffe000) == 0x69056000)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
|
|
#define cpu_is_xscale() 0
|
|
#else
|
|
#define cpu_is_xscale() 1
|
|
#endif
|
|
|
|
#define set_cr(x) \
|
|
__asm__ __volatile__( \
|
|
"mcr p15, 0, %0, c1, c0, 0 @ set CR" \
|
|
: : "r" (x) : "cc")
|
|
|
|
#define get_cr() \
|
|
({ \
|
|
unsigned int __val; \
|
|
__asm__ __volatile__( \
|
|
"mrc p15, 0, %0, c1, c0, 0 @ get CR" \
|
|
: "=r" (__val) : : "cc"); \
|
|
__val; \
|
|
})
|
|
|
|
extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
|
|
extern unsigned long cr_alignment; /* defined in entry-armv.S */
|
|
|
|
#define UDBG_UNDEFINED (1 << 0)
|
|
#define UDBG_SYSCALL (1 << 1)
|
|
#define UDBG_BADABORT (1 << 2)
|
|
#define UDBG_SEGV (1 << 3)
|
|
#define UDBG_BUS (1 << 4)
|
|
|
|
extern unsigned int user_debug;
|
|
|
|
#if __LINUX_ARM_ARCH__ >= 4
|
|
#define vectors_high() (cr_alignment & CR_V)
|
|
#else
|
|
#define vectors_high() (0)
|
|
#endif
|
|
|
|
#if __LINUX_ARM_ARCH__ >= 6
|
|
#define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
|
|
: : "r" (0) : "memory")
|
|
#else
|
|
#define mb() __asm__ __volatile__ ("" : : : "memory")
|
|
#endif
|
|
#define rmb() mb()
|
|
#define wmb() mb()
|
|
#define read_barrier_depends() do { } while(0)
|
|
#define set_mb(var, value) do { var = value; mb(); } while (0)
|
|
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
|
|
#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
|
|
|
|
/*
|
|
* switch_mm() may do a full cache flush over the context switch,
|
|
* so enable interrupts over the context switch to avoid high
|
|
* latency.
|
|
*/
|
|
#define __ARCH_WANT_INTERRUPTS_ON_CTXSW
|
|
|
|
/*
|
|
* switch_to(prev, next) should switch from task `prev' to `next'
|
|
* `prev' will never be the same as `next'. schedule() itself
|
|
* contains the memory barrier to tell GCC not to cache `current'.
|
|
*/
|
|
extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
|
|
|
|
#define switch_to(prev,next,last) \
|
|
do { \
|
|
last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \
|
|
} while (0)
|
|
|
|
/*
|
|
* On SMP systems, when the scheduler does migration-cost autodetection,
|
|
* it needs a way to flush as much of the CPU's caches as possible.
|
|
*
|
|
* TODO: fill this in!
|
|
*/
|
|
static inline void sched_cacheflush(void)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* CPU interrupt mask handling.
|
|
*/
|
|
#if __LINUX_ARM_ARCH__ >= 6
|
|
|
|
#define local_irq_save(x) \
|
|
({ \
|
|
__asm__ __volatile__( \
|
|
"mrs %0, cpsr @ local_irq_save\n" \
|
|
"cpsid i" \
|
|
: "=r" (x) : : "memory", "cc"); \
|
|
})
|
|
|
|
#define local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc")
|
|
#define local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc")
|
|
#define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc")
|
|
#define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc")
|
|
|
|
#else
|
|
|
|
/*
|
|
* Save the current interrupt enable state & disable IRQs
|
|
*/
|
|
#define local_irq_save(x) \
|
|
({ \
|
|
unsigned long temp; \
|
|
(void) (&temp == &x); \
|
|
__asm__ __volatile__( \
|
|
"mrs %0, cpsr @ local_irq_save\n" \
|
|
" orr %1, %0, #128\n" \
|
|
" msr cpsr_c, %1" \
|
|
: "=r" (x), "=r" (temp) \
|
|
: \
|
|
: "memory", "cc"); \
|
|
})
|
|
|
|
/*
|
|
* Enable IRQs
|
|
*/
|
|
#define local_irq_enable() \
|
|
({ \
|
|
unsigned long temp; \
|
|
__asm__ __volatile__( \
|
|
"mrs %0, cpsr @ local_irq_enable\n" \
|
|
" bic %0, %0, #128\n" \
|
|
" msr cpsr_c, %0" \
|
|
: "=r" (temp) \
|
|
: \
|
|
: "memory", "cc"); \
|
|
})
|
|
|
|
/*
|
|
* Disable IRQs
|
|
*/
|
|
#define local_irq_disable() \
|
|
({ \
|
|
unsigned long temp; \
|
|
__asm__ __volatile__( \
|
|
"mrs %0, cpsr @ local_irq_disable\n" \
|
|
" orr %0, %0, #128\n" \
|
|
" msr cpsr_c, %0" \
|
|
: "=r" (temp) \
|
|
: \
|
|
: "memory", "cc"); \
|
|
})
|
|
|
|
/*
|
|
* Enable FIQs
|
|
*/
|
|
#define local_fiq_enable() \
|
|
({ \
|
|
unsigned long temp; \
|
|
__asm__ __volatile__( \
|
|
"mrs %0, cpsr @ stf\n" \
|
|
" bic %0, %0, #64\n" \
|
|
" msr cpsr_c, %0" \
|
|
: "=r" (temp) \
|
|
: \
|
|
: "memory", "cc"); \
|
|
})
|
|
|
|
/*
|
|
* Disable FIQs
|
|
*/
|
|
#define local_fiq_disable() \
|
|
({ \
|
|
unsigned long temp; \
|
|
__asm__ __volatile__( \
|
|
"mrs %0, cpsr @ clf\n" \
|
|
" orr %0, %0, #64\n" \
|
|
" msr cpsr_c, %0" \
|
|
: "=r" (temp) \
|
|
: \
|
|
: "memory", "cc"); \
|
|
})
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Save the current interrupt enable state.
|
|
*/
|
|
#define local_save_flags(x) \
|
|
({ \
|
|
__asm__ __volatile__( \
|
|
"mrs %0, cpsr @ local_save_flags" \
|
|
: "=r" (x) : : "memory", "cc"); \
|
|
})
|
|
|
|
/*
|
|
* restore saved IRQ & FIQ state
|
|
*/
|
|
#define local_irq_restore(x) \
|
|
__asm__ __volatile__( \
|
|
"msr cpsr_c, %0 @ local_irq_restore\n" \
|
|
: \
|
|
: "r" (x) \
|
|
: "memory", "cc")
|
|
|
|
#define irqs_disabled() \
|
|
({ \
|
|
unsigned long flags; \
|
|
local_save_flags(flags); \
|
|
(int)(flags & PSR_I_BIT); \
|
|
})
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
#define smp_mb() mb()
|
|
#define smp_rmb() rmb()
|
|
#define smp_wmb() wmb()
|
|
#define smp_read_barrier_depends() read_barrier_depends()
|
|
|
|
#else
|
|
|
|
#define smp_mb() barrier()
|
|
#define smp_rmb() barrier()
|
|
#define smp_wmb() barrier()
|
|
#define smp_read_barrier_depends() do { } while(0)
|
|
|
|
#endif /* CONFIG_SMP */
|
|
|
|
#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
|
|
/*
|
|
* On the StrongARM, "swp" is terminally broken since it bypasses the
|
|
* cache totally. This means that the cache becomes inconsistent, and,
|
|
* since we use normal loads/stores as well, this is really bad.
|
|
* Typically, this causes oopsen in filp_close, but could have other,
|
|
* more disasterous effects. There are two work-arounds:
|
|
* 1. Disable interrupts and emulate the atomic swap
|
|
* 2. Clean the cache, perform atomic swap, flush the cache
|
|
*
|
|
* We choose (1) since its the "easiest" to achieve here and is not
|
|
* dependent on the processor type.
|
|
*
|
|
* NOTE that this solution won't work on an SMP system, so explcitly
|
|
* forbid it here.
|
|
*/
|
|
#define swp_is_buggy
|
|
#endif
|
|
|
|
static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
|
|
{
|
|
extern void __bad_xchg(volatile void *, int);
|
|
unsigned long ret;
|
|
#ifdef swp_is_buggy
|
|
unsigned long flags;
|
|
#endif
|
|
#if __LINUX_ARM_ARCH__ >= 6
|
|
unsigned int tmp;
|
|
#endif
|
|
|
|
switch (size) {
|
|
#if __LINUX_ARM_ARCH__ >= 6
|
|
case 1:
|
|
asm volatile("@ __xchg1\n"
|
|
"1: ldrexb %0, [%3]\n"
|
|
" strexb %1, %2, [%3]\n"
|
|
" teq %1, #0\n"
|
|
" bne 1b"
|
|
: "=&r" (ret), "=&r" (tmp)
|
|
: "r" (x), "r" (ptr)
|
|
: "memory", "cc");
|
|
break;
|
|
case 4:
|
|
asm volatile("@ __xchg4\n"
|
|
"1: ldrex %0, [%3]\n"
|
|
" strex %1, %2, [%3]\n"
|
|
" teq %1, #0\n"
|
|
" bne 1b"
|
|
: "=&r" (ret), "=&r" (tmp)
|
|
: "r" (x), "r" (ptr)
|
|
: "memory", "cc");
|
|
break;
|
|
#elif defined(swp_is_buggy)
|
|
#ifdef CONFIG_SMP
|
|
#error SMP is not supported on this platform
|
|
#endif
|
|
case 1:
|
|
local_irq_save(flags);
|
|
ret = *(volatile unsigned char *)ptr;
|
|
*(volatile unsigned char *)ptr = x;
|
|
local_irq_restore(flags);
|
|
break;
|
|
|
|
case 4:
|
|
local_irq_save(flags);
|
|
ret = *(volatile unsigned long *)ptr;
|
|
*(volatile unsigned long *)ptr = x;
|
|
local_irq_restore(flags);
|
|
break;
|
|
#else
|
|
case 1:
|
|
asm volatile("@ __xchg1\n"
|
|
" swpb %0, %1, [%2]"
|
|
: "=&r" (ret)
|
|
: "r" (x), "r" (ptr)
|
|
: "memory", "cc");
|
|
break;
|
|
case 4:
|
|
asm volatile("@ __xchg4\n"
|
|
" swp %0, %1, [%2]"
|
|
: "=&r" (ret)
|
|
: "r" (x), "r" (ptr)
|
|
: "memory", "cc");
|
|
break;
|
|
#endif
|
|
default:
|
|
__bad_xchg(ptr, size), ret = 0;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
extern void disable_hlt(void);
|
|
extern void enable_hlt(void);
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
#define arch_align_stack(x) (x)
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif
|