android_kernel_xiaomi_sm8350/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
Mel Gorman 7a2d19bced mm: vmscan: tracepoint: account for scanned pages similarly for both ftrace and vmstat
When correlating ftrace results with /proc/vmstat, I noticed that the
reporting scripts value for "pages scanned" differed significantly.  Both
values were "right" depending on how you look at it.

The difference is due to vmstat only counting scanning of the inactive
list towards pages scanned.  The analysis script for the tracepoint counts
active and inactive list yielding a far higher value than vmstat.  The
resulting scanning/reclaim ratio looks much worse.  The tracepoint is ok
but this patch updates the reporting script so that the report values for
scanned are similar to vmstat.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 19:43:33 -08:00

715 lines
25 KiB
Perl

#!/usr/bin/perl
# This is a POC for reading the text representation of trace output related to
# page reclaim. It makes an attempt to extract some high-level information on
# what is going on. The accuracy of the parser may vary
#
# Example usage: trace-vmscan-postprocess.pl < /sys/kernel/debug/tracing/trace_pipe
# other options
# --read-procstat If the trace lacks process info, get it from /proc
# --ignore-pid Aggregate processes of the same name together
#
# Copyright (c) IBM Corporation 2009
# Author: Mel Gorman <mel@csn.ul.ie>
use strict;
use Getopt::Long;
# Tracepoint events
use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN => 1;
use constant MM_VMSCAN_DIRECT_RECLAIM_END => 2;
use constant MM_VMSCAN_KSWAPD_WAKE => 3;
use constant MM_VMSCAN_KSWAPD_SLEEP => 4;
use constant MM_VMSCAN_LRU_SHRINK_ACTIVE => 5;
use constant MM_VMSCAN_LRU_SHRINK_INACTIVE => 6;
use constant MM_VMSCAN_LRU_ISOLATE => 7;
use constant MM_VMSCAN_WRITEPAGE_FILE_SYNC => 8;
use constant MM_VMSCAN_WRITEPAGE_ANON_SYNC => 9;
use constant MM_VMSCAN_WRITEPAGE_FILE_ASYNC => 10;
use constant MM_VMSCAN_WRITEPAGE_ANON_ASYNC => 11;
use constant MM_VMSCAN_WRITEPAGE_ASYNC => 12;
use constant EVENT_UNKNOWN => 13;
# Per-order events
use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER => 11;
use constant MM_VMSCAN_WAKEUP_KSWAPD_PERORDER => 12;
use constant MM_VMSCAN_KSWAPD_WAKE_PERORDER => 13;
use constant HIGH_KSWAPD_REWAKEUP_PERORDER => 14;
# Constants used to track state
use constant STATE_DIRECT_BEGIN => 15;
use constant STATE_DIRECT_ORDER => 16;
use constant STATE_KSWAPD_BEGIN => 17;
use constant STATE_KSWAPD_ORDER => 18;
# High-level events extrapolated from tracepoints
use constant HIGH_DIRECT_RECLAIM_LATENCY => 19;
use constant HIGH_KSWAPD_LATENCY => 20;
use constant HIGH_KSWAPD_REWAKEUP => 21;
use constant HIGH_NR_SCANNED => 22;
use constant HIGH_NR_TAKEN => 23;
use constant HIGH_NR_RECLAIMED => 24;
use constant HIGH_NR_CONTIG_DIRTY => 25;
my %perprocesspid;
my %perprocess;
my %last_procmap;
my $opt_ignorepid;
my $opt_read_procstat;
my $total_wakeup_kswapd;
my ($total_direct_reclaim, $total_direct_nr_scanned);
my ($total_direct_latency, $total_kswapd_latency);
my ($total_direct_nr_reclaimed);
my ($total_direct_writepage_file_sync, $total_direct_writepage_file_async);
my ($total_direct_writepage_anon_sync, $total_direct_writepage_anon_async);
my ($total_kswapd_nr_scanned, $total_kswapd_wake);
my ($total_kswapd_writepage_file_sync, $total_kswapd_writepage_file_async);
my ($total_kswapd_writepage_anon_sync, $total_kswapd_writepage_anon_async);
my ($total_kswapd_nr_reclaimed);
# Catch sigint and exit on request
my $sigint_report = 0;
my $sigint_exit = 0;
my $sigint_pending = 0;
my $sigint_received = 0;
sub sigint_handler {
my $current_time = time;
if ($current_time - 2 > $sigint_received) {
print "SIGINT received, report pending. Hit ctrl-c again to exit\n";
$sigint_report = 1;
} else {
if (!$sigint_exit) {
print "Second SIGINT received quickly, exiting\n";
}
$sigint_exit++;
}
if ($sigint_exit > 3) {
print "Many SIGINTs received, exiting now without report\n";
exit;
}
$sigint_received = $current_time;
$sigint_pending = 1;
}
$SIG{INT} = "sigint_handler";
# Parse command line options
GetOptions(
'ignore-pid' => \$opt_ignorepid,
'read-procstat' => \$opt_read_procstat,
);
# Defaults for dynamically discovered regex's
my $regex_direct_begin_default = 'order=([0-9]*) may_writepage=([0-9]*) gfp_flags=([A-Z_|]*)';
my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)';
my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) contig_taken=([0-9]*) contig_dirty=([0-9]*) contig_failed=([0-9]*)';
my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) zid=([0-9]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)';
my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_rotated=([0-9]*) priority=([0-9]*)';
my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
# Dyanically discovered regex
my $regex_direct_begin;
my $regex_direct_end;
my $regex_kswapd_wake;
my $regex_kswapd_sleep;
my $regex_wakeup_kswapd;
my $regex_lru_isolate;
my $regex_lru_shrink_inactive;
my $regex_lru_shrink_active;
my $regex_writepage;
# Static regex used. Specified like this for readability and for use with /o
# (process_pid) (cpus ) ( time ) (tpoint ) (details)
my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)';
my $regex_statname = '[-0-9]*\s\((.*)\).*';
my $regex_statppid = '[-0-9]*\s\(.*\)\s[A-Za-z]\s([0-9]*).*';
sub generate_traceevent_regex {
my $event = shift;
my $default = shift;
my $regex;
# Read the event format or use the default
if (!open (FORMAT, "/sys/kernel/debug/tracing/events/$event/format")) {
print("WARNING: Event $event format string not found\n");
return $default;
} else {
my $line;
while (!eof(FORMAT)) {
$line = <FORMAT>;
$line =~ s/, REC->.*//;
if ($line =~ /^print fmt:\s"(.*)".*/) {
$regex = $1;
$regex =~ s/%s/\([0-9a-zA-Z|_]*\)/g;
$regex =~ s/%p/\([0-9a-f]*\)/g;
$regex =~ s/%d/\([-0-9]*\)/g;
$regex =~ s/%ld/\([-0-9]*\)/g;
$regex =~ s/%lu/\([0-9]*\)/g;
}
}
}
# Can't handle the print_flags stuff but in the context of this
# script, it really doesn't matter
$regex =~ s/\(REC.*\) \? __print_flags.*//;
# Verify fields are in the right order
my $tuple;
foreach $tuple (split /\s/, $regex) {
my ($key, $value) = split(/=/, $tuple);
my $expected = shift;
if ($key ne $expected) {
print("WARNING: Format not as expected for event $event '$key' != '$expected'\n");
$regex =~ s/$key=\((.*)\)/$key=$1/;
}
}
if (defined shift) {
die("Fewer fields than expected in format");
}
return $regex;
}
$regex_direct_begin = generate_traceevent_regex(
"vmscan/mm_vmscan_direct_reclaim_begin",
$regex_direct_begin_default,
"order", "may_writepage",
"gfp_flags");
$regex_direct_end = generate_traceevent_regex(
"vmscan/mm_vmscan_direct_reclaim_end",
$regex_direct_end_default,
"nr_reclaimed");
$regex_kswapd_wake = generate_traceevent_regex(
"vmscan/mm_vmscan_kswapd_wake",
$regex_kswapd_wake_default,
"nid", "order");
$regex_kswapd_sleep = generate_traceevent_regex(
"vmscan/mm_vmscan_kswapd_sleep",
$regex_kswapd_sleep_default,
"nid");
$regex_wakeup_kswapd = generate_traceevent_regex(
"vmscan/mm_vmscan_wakeup_kswapd",
$regex_wakeup_kswapd_default,
"nid", "zid", "order");
$regex_lru_isolate = generate_traceevent_regex(
"vmscan/mm_vmscan_lru_isolate",
$regex_lru_isolate_default,
"isolate_mode", "order",
"nr_requested", "nr_scanned", "nr_taken",
"contig_taken", "contig_dirty", "contig_failed");
$regex_lru_shrink_inactive = generate_traceevent_regex(
"vmscan/mm_vmscan_lru_shrink_inactive",
$regex_lru_shrink_inactive_default,
"nid", "zid",
"nr_scanned", "nr_reclaimed", "priority",
"flags");
$regex_lru_shrink_active = generate_traceevent_regex(
"vmscan/mm_vmscan_lru_shrink_active",
$regex_lru_shrink_active_default,
"nid", "zid",
"lru",
"nr_scanned", "nr_rotated", "priority");
$regex_writepage = generate_traceevent_regex(
"vmscan/mm_vmscan_writepage",
$regex_writepage_default,
"page", "pfn", "flags");
sub read_statline($) {
my $pid = $_[0];
my $statline;
if (open(STAT, "/proc/$pid/stat")) {
$statline = <STAT>;
close(STAT);
}
if ($statline eq '') {
$statline = "-1 (UNKNOWN_PROCESS_NAME) R 0";
}
return $statline;
}
sub guess_process_pid($$) {
my $pid = $_[0];
my $statline = $_[1];
if ($pid == 0) {
return "swapper-0";
}
if ($statline !~ /$regex_statname/o) {
die("Failed to math stat line for process name :: $statline");
}
return "$1-$pid";
}
# Convert sec.usec timestamp format
sub timestamp_to_ms($) {
my $timestamp = $_[0];
my ($sec, $usec) = split (/\./, $timestamp);
return ($sec * 1000) + ($usec / 1000);
}
sub process_events {
my $traceevent;
my $process_pid;
my $cpus;
my $timestamp;
my $tracepoint;
my $details;
my $statline;
# Read each line of the event log
EVENT_PROCESS:
while ($traceevent = <STDIN>) {
if ($traceevent =~ /$regex_traceevent/o) {
$process_pid = $1;
$timestamp = $3;
$tracepoint = $4;
$process_pid =~ /(.*)-([0-9]*)$/;
my $process = $1;
my $pid = $2;
if ($process eq "") {
$process = $last_procmap{$pid};
$process_pid = "$process-$pid";
}
$last_procmap{$pid} = $process;
if ($opt_read_procstat) {
$statline = read_statline($pid);
if ($opt_read_procstat && $process eq '') {
$process_pid = guess_process_pid($pid, $statline);
}
}
} else {
next;
}
# Perl Switch() sucks majorly
if ($tracepoint eq "mm_vmscan_direct_reclaim_begin") {
$timestamp = timestamp_to_ms($timestamp);
$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}++;
$perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN} = $timestamp;
$details = $5;
if ($details !~ /$regex_direct_begin/o) {
print "WARNING: Failed to parse mm_vmscan_direct_reclaim_begin as expected\n";
print " $details\n";
print " $regex_direct_begin\n";
next;
}
my $order = $1;
$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order]++;
$perprocesspid{$process_pid}->{STATE_DIRECT_ORDER} = $order;
} elsif ($tracepoint eq "mm_vmscan_direct_reclaim_end") {
# Count the event itself
my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END};
$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END}++;
# Record how long direct reclaim took this time
if (defined $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN}) {
$timestamp = timestamp_to_ms($timestamp);
my $order = $perprocesspid{$process_pid}->{STATE_DIRECT_ORDER};
my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN});
$perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] = "$order-$latency";
}
} elsif ($tracepoint eq "mm_vmscan_kswapd_wake") {
$details = $5;
if ($details !~ /$regex_kswapd_wake/o) {
print "WARNING: Failed to parse mm_vmscan_kswapd_wake as expected\n";
print " $details\n";
print " $regex_kswapd_wake\n";
next;
}
my $order = $2;
$perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER} = $order;
if (!$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN}) {
$timestamp = timestamp_to_ms($timestamp);
$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}++;
$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = $timestamp;
$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order]++;
} else {
$perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP}++;
$perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order]++;
}
} elsif ($tracepoint eq "mm_vmscan_kswapd_sleep") {
# Count the event itself
my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP};
$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP}++;
# Record how long kswapd was awake
$timestamp = timestamp_to_ms($timestamp);
my $order = $perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER};
my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN});
$perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index] = "$order-$latency";
$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = 0;
} elsif ($tracepoint eq "mm_vmscan_wakeup_kswapd") {
$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}++;
$details = $5;
if ($details !~ /$regex_wakeup_kswapd/o) {
print "WARNING: Failed to parse mm_vmscan_wakeup_kswapd as expected\n";
print " $details\n";
print " $regex_wakeup_kswapd\n";
next;
}
my $order = $3;
$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order]++;
} elsif ($tracepoint eq "mm_vmscan_lru_isolate") {
$details = $5;
if ($details !~ /$regex_lru_isolate/o) {
print "WARNING: Failed to parse mm_vmscan_lru_isolate as expected\n";
print " $details\n";
print " $regex_lru_isolate/o\n";
next;
}
my $isolate_mode = $1;
my $nr_scanned = $4;
my $nr_contig_dirty = $7;
# To closer match vmstat scanning statistics, only count isolate_both
# and isolate_inactive as scanning. isolate_active is rotation
# isolate_inactive == 0
# isolate_active == 1
# isolate_both == 2
if ($isolate_mode != 1) {
$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
}
$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
$details = $5;
if ($details !~ /$regex_lru_shrink_inactive/o) {
print "WARNING: Failed to parse mm_vmscan_lru_shrink_inactive as expected\n";
print " $details\n";
print " $regex_lru_shrink_inactive/o\n";
next;
}
my $nr_reclaimed = $4;
$perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED} += $nr_reclaimed;
} elsif ($tracepoint eq "mm_vmscan_writepage") {
$details = $5;
if ($details !~ /$regex_writepage/o) {
print "WARNING: Failed to parse mm_vmscan_writepage as expected\n";
print " $details\n";
print " $regex_writepage\n";
next;
}
my $flags = $3;
my $file = 0;
my $sync_io = 0;
if ($flags =~ /RECLAIM_WB_FILE/) {
$file = 1;
}
if ($flags =~ /RECLAIM_WB_SYNC/) {
$sync_io = 1;
}
if ($sync_io) {
if ($file) {
$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC}++;
} else {
$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}++;
}
} else {
if ($file) {
$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC}++;
} else {
$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC}++;
}
}
} else {
$perprocesspid{$process_pid}->{EVENT_UNKNOWN}++;
}
if ($sigint_pending) {
last EVENT_PROCESS;
}
}
}
sub dump_stats {
my $hashref = shift;
my %stats = %$hashref;
# Dump per-process stats
my $process_pid;
my $max_strlen = 0;
# Get the maximum process name
foreach $process_pid (keys %perprocesspid) {
my $len = length($process_pid);
if ($len > $max_strlen) {
$max_strlen = $len;
}
}
$max_strlen += 2;
# Work out latencies
printf("\n") if !$opt_ignorepid;
printf("Reclaim latencies expressed as order-latency_in_ms\n") if !$opt_ignorepid;
foreach $process_pid (keys %stats) {
if (!$stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[0] &&
!$stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[0]) {
next;
}
printf "%-" . $max_strlen . "s ", $process_pid if !$opt_ignorepid;
my $index = 0;
while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] ||
defined $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) {
if ($stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
printf("%s ", $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) if !$opt_ignorepid;
my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
$total_direct_latency += $latency;
} else {
printf("%s ", $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) if !$opt_ignorepid;
my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]);
$total_kswapd_latency += $latency;
}
$index++;
}
print "\n" if !$opt_ignorepid;
}
# Print out process activity
printf("\n");
printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s %8s %8s\n", "Process", "Direct", "Wokeup", "Pages", "Pages", "Pages", "Pages", "Time");
printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s %8s %8s\n", "details", "Rclms", "Kswapd", "Scanned", "Rclmed", "Sync-IO", "ASync-IO", "Stalled");
foreach $process_pid (keys %stats) {
if (!$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
next;
}
$total_direct_reclaim += $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
$total_wakeup_kswapd += $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
$total_direct_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
$total_direct_nr_reclaimed += $stats{$process_pid}->{HIGH_NR_RECLAIMED};
$total_direct_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
$total_direct_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
$total_direct_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
$total_direct_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
my $index = 0;
my $this_reclaim_delay = 0;
while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
$this_reclaim_delay += $latency;
$index++;
}
printf("%-" . $max_strlen . "s %8d %10d %8u %8u %8u %8u %8.3f",
$process_pid,
$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN},
$stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD},
$stats{$process_pid}->{HIGH_NR_SCANNED},
$stats{$process_pid}->{HIGH_NR_RECLAIMED},
$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC},
$this_reclaim_delay / 1000);
if ($stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
print " ";
for (my $order = 0; $order < 20; $order++) {
my $count = $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
if ($count != 0) {
print "direct-$order=$count ";
}
}
}
if ($stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}) {
print " ";
for (my $order = 0; $order < 20; $order++) {
my $count = $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
if ($count != 0) {
print "wakeup-$order=$count ";
}
}
}
if ($stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY}) {
print " ";
my $count = $stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY};
if ($count != 0) {
print "contig-dirty=$count ";
}
}
print "\n";
}
# Print out kswapd activity
printf("\n");
printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s\n", "Kswapd", "Kswapd", "Order", "Pages", "Pages", "Pages", "Pages");
printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s\n", "Instance", "Wakeups", "Re-wakeup", "Scanned", "Rclmed", "Sync-IO", "ASync-IO");
foreach $process_pid (keys %stats) {
if (!$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
next;
}
$total_kswapd_wake += $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
$total_kswapd_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
$total_kswapd_nr_reclaimed += $stats{$process_pid}->{HIGH_NR_RECLAIMED};
$total_kswapd_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
$total_kswapd_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
$total_kswapd_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
$total_kswapd_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
printf("%-" . $max_strlen . "s %8d %10d %8u %8u %8i %8u",
$process_pid,
$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE},
$stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP},
$stats{$process_pid}->{HIGH_NR_SCANNED},
$stats{$process_pid}->{HIGH_NR_RECLAIMED},
$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC});
if ($stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
print " ";
for (my $order = 0; $order < 20; $order++) {
my $count = $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
if ($count != 0) {
print "wake-$order=$count ";
}
}
}
if ($stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP}) {
print " ";
for (my $order = 0; $order < 20; $order++) {
my $count = $stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order];
if ($count != 0) {
print "rewake-$order=$count ";
}
}
}
printf("\n");
}
# Print out summaries
$total_direct_latency /= 1000;
$total_kswapd_latency /= 1000;
print "\nSummary\n";
print "Direct reclaims: $total_direct_reclaim\n";
print "Direct reclaim pages scanned: $total_direct_nr_scanned\n";
print "Direct reclaim pages reclaimed: $total_direct_nr_reclaimed\n";
print "Direct reclaim write file sync I/O: $total_direct_writepage_file_sync\n";
print "Direct reclaim write anon sync I/O: $total_direct_writepage_anon_sync\n";
print "Direct reclaim write file async I/O: $total_direct_writepage_file_async\n";
print "Direct reclaim write anon async I/O: $total_direct_writepage_anon_async\n";
print "Wake kswapd requests: $total_wakeup_kswapd\n";
printf "Time stalled direct reclaim: %-1.2f seconds\n", $total_direct_latency;
print "\n";
print "Kswapd wakeups: $total_kswapd_wake\n";
print "Kswapd pages scanned: $total_kswapd_nr_scanned\n";
print "Kswapd pages reclaimed: $total_kswapd_nr_reclaimed\n";
print "Kswapd reclaim write file sync I/O: $total_kswapd_writepage_file_sync\n";
print "Kswapd reclaim write anon sync I/O: $total_kswapd_writepage_anon_sync\n";
print "Kswapd reclaim write file async I/O: $total_kswapd_writepage_file_async\n";
print "Kswapd reclaim write anon async I/O: $total_kswapd_writepage_anon_async\n";
printf "Time kswapd awake: %-1.2f seconds\n", $total_kswapd_latency;
}
sub aggregate_perprocesspid() {
my $process_pid;
my $process;
undef %perprocess;
foreach $process_pid (keys %perprocesspid) {
$process = $process_pid;
$process =~ s/-([0-9])*$//;
if ($process eq '') {
$process = "NO_PROCESS_NAME";
}
$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN} += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
$perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE} += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
$perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD} += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
$perprocess{$process}->{HIGH_KSWAPD_REWAKEUP} += $perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP};
$perprocess{$process}->{HIGH_NR_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_SCANNED};
$perprocess{$process}->{HIGH_NR_RECLAIMED} += $perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED};
$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
for (my $order = 0; $order < 20; $order++) {
$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
$perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
$perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
}
# Aggregate direct reclaim latencies
my $wr_index = $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END};
my $rd_index = 0;
while (defined $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index]) {
$perprocess{$process}->{HIGH_DIRECT_RECLAIM_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index];
$rd_index++;
$wr_index++;
}
$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
# Aggregate kswapd latencies
my $wr_index = $perprocess{$process}->{MM_VMSCAN_KSWAPD_SLEEP};
my $rd_index = 0;
while (defined $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index]) {
$perprocess{$process}->{HIGH_KSWAPD_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index];
$rd_index++;
$wr_index++;
}
$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
}
}
sub report() {
if (!$opt_ignorepid) {
dump_stats(\%perprocesspid);
} else {
aggregate_perprocesspid();
dump_stats(\%perprocess);
}
}
# Process events or signals until neither is available
sub signal_loop() {
my $sigint_processed;
do {
$sigint_processed = 0;
process_events();
# Handle pending signals if any
if ($sigint_pending) {
my $current_time = time;
if ($sigint_exit) {
print "Received exit signal\n";
$sigint_pending = 0;
}
if ($sigint_report) {
if ($current_time >= $sigint_received + 2) {
report();
$sigint_report = 0;
$sigint_pending = 0;
$sigint_processed = 1;
}
}
}
} while ($sigint_pending || $sigint_processed);
}
signal_loop();
report();