1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
101 lines
4.1 KiB
Plaintext
101 lines
4.1 KiB
Plaintext
Tmpfs is a file system which keeps all files in virtual memory.
|
|
|
|
|
|
Everything in tmpfs is temporary in the sense that no files will be
|
|
created on your hard drive. If you unmount a tmpfs instance,
|
|
everything stored therein is lost.
|
|
|
|
tmpfs puts everything into the kernel internal caches and grows and
|
|
shrinks to accommodate the files it contains and is able to swap
|
|
unneeded pages out to swap space. It has maximum size limits which can
|
|
be adjusted on the fly via 'mount -o remount ...'
|
|
|
|
If you compare it to ramfs (which was the template to create tmpfs)
|
|
you gain swapping and limit checking. Another similar thing is the RAM
|
|
disk (/dev/ram*), which simulates a fixed size hard disk in physical
|
|
RAM, where you have to create an ordinary filesystem on top. Ramdisks
|
|
cannot swap and you do not have the possibility to resize them.
|
|
|
|
Since tmpfs lives completely in the page cache and on swap, all tmpfs
|
|
pages currently in memory will show up as cached. It will not show up
|
|
as shared or something like that. Further on you can check the actual
|
|
RAM+swap use of a tmpfs instance with df(1) and du(1).
|
|
|
|
|
|
tmpfs has the following uses:
|
|
|
|
1) There is always a kernel internal mount which you will not see at
|
|
all. This is used for shared anonymous mappings and SYSV shared
|
|
memory.
|
|
|
|
This mount does not depend on CONFIG_TMPFS. If CONFIG_TMPFS is not
|
|
set, the user visible part of tmpfs is not build. But the internal
|
|
mechanisms are always present.
|
|
|
|
2) glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
|
|
POSIX shared memory (shm_open, shm_unlink). Adding the following
|
|
line to /etc/fstab should take care of this:
|
|
|
|
tmpfs /dev/shm tmpfs defaults 0 0
|
|
|
|
Remember to create the directory that you intend to mount tmpfs on
|
|
if necessary (/dev/shm is automagically created if you use devfs).
|
|
|
|
This mount is _not_ needed for SYSV shared memory. The internal
|
|
mount is used for that. (In the 2.3 kernel versions it was
|
|
necessary to mount the predecessor of tmpfs (shm fs) to use SYSV
|
|
shared memory)
|
|
|
|
3) Some people (including me) find it very convenient to mount it
|
|
e.g. on /tmp and /var/tmp and have a big swap partition. And now
|
|
loop mounts of tmpfs files do work, so mkinitrd shipped by most
|
|
distributions should succeed with a tmpfs /tmp.
|
|
|
|
4) And probably a lot more I do not know about :-)
|
|
|
|
|
|
tmpfs has three mount options for sizing:
|
|
|
|
size: The limit of allocated bytes for this tmpfs instance. The
|
|
default is half of your physical RAM without swap. If you
|
|
oversize your tmpfs instances the machine will deadlock
|
|
since the OOM handler will not be able to free that memory.
|
|
nr_blocks: The same as size, but in blocks of PAGE_CACHE_SIZE.
|
|
nr_inodes: The maximum number of inodes for this instance. The default
|
|
is half of the number of your physical RAM pages, or (on a
|
|
a machine with highmem) the number of lowmem RAM pages,
|
|
whichever is the lower.
|
|
|
|
These parameters accept a suffix k, m or g for kilo, mega and giga and
|
|
can be changed on remount. The size parameter also accepts a suffix %
|
|
to limit this tmpfs instance to that percentage of your physical RAM:
|
|
the default, when neither size nor nr_blocks is specified, is size=50%
|
|
|
|
If both nr_blocks (or size) and nr_inodes are set to 0, neither blocks
|
|
nor inodes will be limited in that instance. It is generally unwise to
|
|
mount with such options, since it allows any user with write access to
|
|
use up all the memory on the machine; but enhances the scalability of
|
|
that instance in a system with many cpus making intensive use of it.
|
|
|
|
|
|
To specify the initial root directory you can use the following mount
|
|
options:
|
|
|
|
mode: The permissions as an octal number
|
|
uid: The user id
|
|
gid: The group id
|
|
|
|
These options do not have any effect on remount. You can change these
|
|
parameters with chmod(1), chown(1) and chgrp(1) on a mounted filesystem.
|
|
|
|
|
|
So 'mount -t tmpfs -o size=10G,nr_inodes=10k,mode=700 tmpfs /mytmpfs'
|
|
will give you tmpfs instance on /mytmpfs which can allocate 10GB
|
|
RAM/SWAP in 10240 inodes and it is only accessible by root.
|
|
|
|
|
|
Author:
|
|
Christoph Rohland <cr@sap.com>, 1.12.01
|
|
Updated:
|
|
Hugh Dickins <hugh@veritas.com>, 01 September 2004
|