eaca90dab6
The Belkin F5D7050rev5000de (id 050d:705e) has the Realtek RTL8187B chip and works with the 2.6.27 driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1259 lines
37 KiB
C
1259 lines
37 KiB
C
/*
|
|
* Linux device driver for RTL8187
|
|
*
|
|
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
|
|
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
|
|
*
|
|
* Based on the r8187 driver, which is:
|
|
* Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
|
|
*
|
|
* Magic delays and register offsets below are taken from the original
|
|
* r8187 driver sources. Thanks to Realtek for their support!
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/eeprom_93cx6.h>
|
|
#include <net/mac80211.h>
|
|
|
|
#include "rtl8187.h"
|
|
#include "rtl8187_rtl8225.h"
|
|
|
|
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
|
|
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
|
|
MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct usb_device_id rtl8187_table[] __devinitdata = {
|
|
/* Asus */
|
|
{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
|
|
/* Belkin */
|
|
{USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B},
|
|
/* Realtek */
|
|
{USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
|
|
{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
|
|
{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
|
|
{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
|
|
/* Netgear */
|
|
{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
|
|
{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
|
|
{USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
|
|
/* HP */
|
|
{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
|
|
/* Sitecom */
|
|
{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, rtl8187_table);
|
|
|
|
static const struct ieee80211_rate rtl818x_rates[] = {
|
|
{ .bitrate = 10, .hw_value = 0, },
|
|
{ .bitrate = 20, .hw_value = 1, },
|
|
{ .bitrate = 55, .hw_value = 2, },
|
|
{ .bitrate = 110, .hw_value = 3, },
|
|
{ .bitrate = 60, .hw_value = 4, },
|
|
{ .bitrate = 90, .hw_value = 5, },
|
|
{ .bitrate = 120, .hw_value = 6, },
|
|
{ .bitrate = 180, .hw_value = 7, },
|
|
{ .bitrate = 240, .hw_value = 8, },
|
|
{ .bitrate = 360, .hw_value = 9, },
|
|
{ .bitrate = 480, .hw_value = 10, },
|
|
{ .bitrate = 540, .hw_value = 11, },
|
|
};
|
|
|
|
static const struct ieee80211_channel rtl818x_channels[] = {
|
|
{ .center_freq = 2412 },
|
|
{ .center_freq = 2417 },
|
|
{ .center_freq = 2422 },
|
|
{ .center_freq = 2427 },
|
|
{ .center_freq = 2432 },
|
|
{ .center_freq = 2437 },
|
|
{ .center_freq = 2442 },
|
|
{ .center_freq = 2447 },
|
|
{ .center_freq = 2452 },
|
|
{ .center_freq = 2457 },
|
|
{ .center_freq = 2462 },
|
|
{ .center_freq = 2467 },
|
|
{ .center_freq = 2472 },
|
|
{ .center_freq = 2484 },
|
|
};
|
|
|
|
static void rtl8187_iowrite_async_cb(struct urb *urb)
|
|
{
|
|
kfree(urb->context);
|
|
usb_free_urb(urb);
|
|
}
|
|
|
|
static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr,
|
|
void *data, u16 len)
|
|
{
|
|
struct usb_ctrlrequest *dr;
|
|
struct urb *urb;
|
|
struct rtl8187_async_write_data {
|
|
u8 data[4];
|
|
struct usb_ctrlrequest dr;
|
|
} *buf;
|
|
int rc;
|
|
|
|
buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
|
|
if (!buf)
|
|
return;
|
|
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb) {
|
|
kfree(buf);
|
|
return;
|
|
}
|
|
|
|
dr = &buf->dr;
|
|
|
|
dr->bRequestType = RTL8187_REQT_WRITE;
|
|
dr->bRequest = RTL8187_REQ_SET_REG;
|
|
dr->wValue = addr;
|
|
dr->wIndex = 0;
|
|
dr->wLength = cpu_to_le16(len);
|
|
|
|
memcpy(buf, data, len);
|
|
|
|
usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
|
|
(unsigned char *)dr, buf, len,
|
|
rtl8187_iowrite_async_cb, buf);
|
|
rc = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (rc < 0) {
|
|
kfree(buf);
|
|
usb_free_urb(urb);
|
|
}
|
|
}
|
|
|
|
static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
|
|
__le32 *addr, u32 val)
|
|
{
|
|
__le32 buf = cpu_to_le32(val);
|
|
|
|
rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr),
|
|
&buf, sizeof(buf));
|
|
}
|
|
|
|
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
|
|
data <<= 8;
|
|
data |= addr | 0x80;
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
|
|
rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
|
|
rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
|
|
rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
static void rtl8187_tx_cb(struct urb *urb)
|
|
{
|
|
struct sk_buff *skb = (struct sk_buff *)urb->context;
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
struct ieee80211_hw *hw = info->driver_data[0];
|
|
struct rtl8187_priv *priv = hw->priv;
|
|
|
|
usb_free_urb(info->driver_data[1]);
|
|
skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
|
|
sizeof(struct rtl8187_tx_hdr));
|
|
memset(&info->status, 0, sizeof(info->status));
|
|
info->flags |= IEEE80211_TX_STAT_ACK;
|
|
ieee80211_tx_status_irqsafe(hw, skb);
|
|
}
|
|
|
|
static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
|
|
unsigned int ep;
|
|
void *buf;
|
|
struct urb *urb;
|
|
__le16 rts_dur = 0;
|
|
u32 flags;
|
|
int rc;
|
|
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb) {
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
flags = skb->len;
|
|
flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
|
|
|
|
flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
|
|
if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
|
|
flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
|
|
if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
|
|
flags |= RTL818X_TX_DESC_FLAG_RTS;
|
|
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
|
|
rts_dur = ieee80211_rts_duration(dev, priv->vif,
|
|
skb->len, info);
|
|
} else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
|
|
flags |= RTL818X_TX_DESC_FLAG_CTS;
|
|
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
|
|
}
|
|
|
|
if (!priv->is_rtl8187b) {
|
|
struct rtl8187_tx_hdr *hdr =
|
|
(struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
|
|
hdr->flags = cpu_to_le32(flags);
|
|
hdr->len = 0;
|
|
hdr->rts_duration = rts_dur;
|
|
hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
|
|
buf = hdr;
|
|
|
|
ep = 2;
|
|
} else {
|
|
/* fc needs to be calculated before skb_push() */
|
|
unsigned int epmap[4] = { 6, 7, 5, 4 };
|
|
struct ieee80211_hdr *tx_hdr =
|
|
(struct ieee80211_hdr *)(skb->data);
|
|
u16 fc = le16_to_cpu(tx_hdr->frame_control);
|
|
|
|
struct rtl8187b_tx_hdr *hdr =
|
|
(struct rtl8187b_tx_hdr *)skb_push(skb, sizeof(*hdr));
|
|
struct ieee80211_rate *txrate =
|
|
ieee80211_get_tx_rate(dev, info);
|
|
memset(hdr, 0, sizeof(*hdr));
|
|
hdr->flags = cpu_to_le32(flags);
|
|
hdr->rts_duration = rts_dur;
|
|
hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
|
|
hdr->tx_duration =
|
|
ieee80211_generic_frame_duration(dev, priv->vif,
|
|
skb->len, txrate);
|
|
buf = hdr;
|
|
|
|
if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
|
|
ep = 12;
|
|
else
|
|
ep = epmap[skb_get_queue_mapping(skb)];
|
|
}
|
|
|
|
/* FIXME: The sequence that follows is needed for this driver to
|
|
* work with mac80211 since "mac80211: fix TX sequence numbers".
|
|
* As with the temporary code in rt2x00, changes will be needed
|
|
* to get proper sequence numbers on beacons. In addition, this
|
|
* patch places the sequence number in the hardware state, which
|
|
* limits us to a single virtual state.
|
|
*/
|
|
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
|
|
if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
|
|
priv->seqno += 0x10;
|
|
ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
|
|
ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
|
|
}
|
|
|
|
info->driver_data[0] = dev;
|
|
info->driver_data[1] = urb;
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
|
|
buf, skb->len, rtl8187_tx_cb, skb);
|
|
rc = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (rc < 0) {
|
|
usb_free_urb(urb);
|
|
kfree_skb(skb);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rtl8187_rx_cb(struct urb *urb)
|
|
{
|
|
struct sk_buff *skb = (struct sk_buff *)urb->context;
|
|
struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
|
|
struct ieee80211_hw *dev = info->dev;
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
struct ieee80211_rx_status rx_status = { 0 };
|
|
int rate, signal;
|
|
u32 flags;
|
|
u32 quality;
|
|
|
|
spin_lock(&priv->rx_queue.lock);
|
|
if (skb->next)
|
|
__skb_unlink(skb, &priv->rx_queue);
|
|
else {
|
|
spin_unlock(&priv->rx_queue.lock);
|
|
return;
|
|
}
|
|
spin_unlock(&priv->rx_queue.lock);
|
|
|
|
if (unlikely(urb->status)) {
|
|
usb_free_urb(urb);
|
|
dev_kfree_skb_irq(skb);
|
|
return;
|
|
}
|
|
|
|
skb_put(skb, urb->actual_length);
|
|
if (!priv->is_rtl8187b) {
|
|
struct rtl8187_rx_hdr *hdr =
|
|
(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
|
|
flags = le32_to_cpu(hdr->flags);
|
|
signal = hdr->signal & 0x7f;
|
|
rx_status.antenna = (hdr->signal >> 7) & 1;
|
|
rx_status.noise = hdr->noise;
|
|
rx_status.mactime = le64_to_cpu(hdr->mac_time);
|
|
priv->quality = signal;
|
|
rx_status.qual = priv->quality;
|
|
priv->noise = hdr->noise;
|
|
rate = (flags >> 20) & 0xF;
|
|
if (rate > 3) { /* OFDM rate */
|
|
if (signal > 90)
|
|
signal = 90;
|
|
else if (signal < 25)
|
|
signal = 25;
|
|
signal = 90 - signal;
|
|
} else { /* CCK rate */
|
|
if (signal > 95)
|
|
signal = 95;
|
|
else if (signal < 30)
|
|
signal = 30;
|
|
signal = 95 - signal;
|
|
}
|
|
rx_status.signal = signal;
|
|
priv->signal = signal;
|
|
} else {
|
|
struct rtl8187b_rx_hdr *hdr =
|
|
(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
|
|
/* The Realtek datasheet for the RTL8187B shows that the RX
|
|
* header contains the following quantities: signal quality,
|
|
* RSSI, AGC, the received power in dB, and the measured SNR.
|
|
* In testing, none of these quantities show qualitative
|
|
* agreement with AP signal strength, except for the AGC,
|
|
* which is inversely proportional to the strength of the
|
|
* signal. In the following, the quality and signal strength
|
|
* are derived from the AGC. The arbitrary scaling constants
|
|
* are chosen to make the results close to the values obtained
|
|
* for a BCM4312 using b43 as the driver. The noise is ignored
|
|
* for now.
|
|
*/
|
|
flags = le32_to_cpu(hdr->flags);
|
|
quality = 170 - hdr->agc;
|
|
if (quality > 100)
|
|
quality = 100;
|
|
signal = 14 - hdr->agc / 2;
|
|
rx_status.qual = quality;
|
|
priv->quality = quality;
|
|
rx_status.signal = signal;
|
|
priv->signal = signal;
|
|
rx_status.antenna = (hdr->rssi >> 7) & 1;
|
|
rx_status.mactime = le64_to_cpu(hdr->mac_time);
|
|
rate = (flags >> 20) & 0xF;
|
|
}
|
|
|
|
skb_trim(skb, flags & 0x0FFF);
|
|
rx_status.rate_idx = rate;
|
|
rx_status.freq = dev->conf.channel->center_freq;
|
|
rx_status.band = dev->conf.channel->band;
|
|
rx_status.flag |= RX_FLAG_TSFT;
|
|
if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
|
|
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
|
|
ieee80211_rx_irqsafe(dev, skb, &rx_status);
|
|
|
|
skb = dev_alloc_skb(RTL8187_MAX_RX);
|
|
if (unlikely(!skb)) {
|
|
usb_free_urb(urb);
|
|
/* TODO check rx queue length and refill *somewhere* */
|
|
return;
|
|
}
|
|
|
|
info = (struct rtl8187_rx_info *)skb->cb;
|
|
info->urb = urb;
|
|
info->dev = dev;
|
|
urb->transfer_buffer = skb_tail_pointer(skb);
|
|
urb->context = skb;
|
|
skb_queue_tail(&priv->rx_queue, skb);
|
|
|
|
usb_submit_urb(urb, GFP_ATOMIC);
|
|
}
|
|
|
|
static int rtl8187_init_urbs(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
struct urb *entry;
|
|
struct sk_buff *skb;
|
|
struct rtl8187_rx_info *info;
|
|
|
|
while (skb_queue_len(&priv->rx_queue) < 8) {
|
|
skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
|
|
if (!skb)
|
|
break;
|
|
entry = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!entry) {
|
|
kfree_skb(skb);
|
|
break;
|
|
}
|
|
usb_fill_bulk_urb(entry, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev,
|
|
priv->is_rtl8187b ? 3 : 1),
|
|
skb_tail_pointer(skb),
|
|
RTL8187_MAX_RX, rtl8187_rx_cb, skb);
|
|
info = (struct rtl8187_rx_info *)skb->cb;
|
|
info->urb = entry;
|
|
info->dev = dev;
|
|
skb_queue_tail(&priv->rx_queue, skb);
|
|
usb_submit_urb(entry, GFP_KERNEL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
u8 reg;
|
|
int i;
|
|
|
|
reg = rtl818x_ioread8(priv, &priv->map->CMD);
|
|
reg &= (1 << 1);
|
|
reg |= RTL818X_CMD_RESET;
|
|
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
|
|
|
|
i = 10;
|
|
do {
|
|
msleep(2);
|
|
if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
|
|
RTL818X_CMD_RESET))
|
|
break;
|
|
} while (--i);
|
|
|
|
if (!i) {
|
|
printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* reload registers from eeprom */
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
|
|
|
|
i = 10;
|
|
do {
|
|
msleep(4);
|
|
if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
|
|
RTL818X_EEPROM_CMD_CONFIG))
|
|
break;
|
|
} while (--i);
|
|
|
|
if (!i) {
|
|
printk(KERN_ERR "%s: eeprom reset timeout!\n",
|
|
wiphy_name(dev->wiphy));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8187_init_hw(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
u8 reg;
|
|
int res;
|
|
|
|
/* reset */
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_CONFIG);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg |
|
|
RTL818X_CONFIG3_ANAPARAM_WRITE);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
|
|
RTL8187_RTL8225_ANAPARAM_ON);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
|
|
RTL8187_RTL8225_ANAPARAM2_ON);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg &
|
|
~RTL818X_CONFIG3_ANAPARAM_WRITE);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
|
|
|
|
msleep(200);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
|
|
msleep(200);
|
|
|
|
res = rtl8187_cmd_reset(dev);
|
|
if (res)
|
|
return res;
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3,
|
|
reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
|
|
RTL8187_RTL8225_ANAPARAM_ON);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
|
|
RTL8187_RTL8225_ANAPARAM2_ON);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3,
|
|
reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
/* setup card */
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
|
|
rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
|
|
rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
|
|
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
|
|
rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
|
|
reg &= 0x3F;
|
|
reg |= 0x80;
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
|
|
rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
|
|
rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
|
|
|
|
// TODO: set RESP_RATE and BRSR properly
|
|
rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
|
|
rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
|
|
|
|
/* host_usb_init */
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
|
|
rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
|
|
reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
|
|
rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
|
|
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
|
|
msleep(100);
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
|
|
rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
|
|
rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_CONFIG);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_NORMAL);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
|
|
msleep(100);
|
|
|
|
priv->rf->init(dev);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
|
|
reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
|
|
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
|
|
rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
|
|
rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
|
|
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const u8 rtl8187b_reg_table[][3] = {
|
|
{0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0},
|
|
{0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0},
|
|
{0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0},
|
|
{0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0},
|
|
|
|
{0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1},
|
|
{0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1},
|
|
{0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xE0, 0xFF, 1}, {0xE1, 0x0F, 1},
|
|
{0xE2, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1}, {0xF2, 0x02, 1},
|
|
{0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1}, {0xF6, 0x06, 1},
|
|
{0xF7, 0x07, 1}, {0xF8, 0x08, 1},
|
|
|
|
{0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2},
|
|
{0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2},
|
|
{0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2},
|
|
{0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2},
|
|
{0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2},
|
|
{0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2},
|
|
{0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2}, {0x72, 0x56, 2},
|
|
{0x73, 0x9A, 2},
|
|
|
|
{0x34, 0xF0, 0}, {0x35, 0x0F, 0}, {0x5B, 0x40, 0}, {0x84, 0x88, 0},
|
|
{0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0},
|
|
{0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0},
|
|
{0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0},
|
|
{0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x91, 0x03, 0},
|
|
|
|
{0x4C, 0x00, 2}, {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0},
|
|
{0x8E, 0x08, 0}, {0x8F, 0x00, 0}
|
|
};
|
|
|
|
static int rtl8187b_init_hw(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
int res, i;
|
|
u8 reg;
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_CONFIG);
|
|
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
|
|
reg |= RTL818X_CONFIG3_ANAPARAM_WRITE | RTL818X_CONFIG3_GNT_SELECT;
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
|
|
RTL8187B_RTL8225_ANAPARAM2_ON);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
|
|
RTL8187B_RTL8225_ANAPARAM_ON);
|
|
rtl818x_iowrite8(priv, &priv->map->ANAPARAM3,
|
|
RTL8187B_RTL8225_ANAPARAM3_ON);
|
|
|
|
rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
|
|
reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
|
|
rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
|
|
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
|
|
reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
res = rtl8187_cmd_reset(dev);
|
|
if (res)
|
|
return res;
|
|
|
|
rtl818x_iowrite16(priv, (__le16 *)0xFF2D, 0x0FFF);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
|
|
reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
|
|
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
|
|
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
|
|
reg |= RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT |
|
|
RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
|
|
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
|
|
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
|
|
reg = rtl818x_ioread8(priv, &priv->map->RATE_FALLBACK);
|
|
reg |= RTL818X_RATE_FALLBACK_ENABLE;
|
|
rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, reg);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
|
|
rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_CONFIG);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
|
|
for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) {
|
|
rtl818x_iowrite8_idx(priv,
|
|
(u8 *)(uintptr_t)
|
|
(rtl8187b_reg_table[i][0] | 0xFF00),
|
|
rtl8187b_reg_table[i][1],
|
|
rtl8187b_reg_table[i][2]);
|
|
}
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
|
|
rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
|
|
|
|
rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1);
|
|
rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1);
|
|
rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1);
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001);
|
|
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_CONFIG);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
|
|
reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
|
|
RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
msleep(1100);
|
|
|
|
priv->rf->init(dev);
|
|
|
|
reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE;
|
|
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
|
|
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
|
|
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
|
|
|
|
reg = rtl818x_ioread8(priv, (u8 *)0xFFDB);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2));
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3);
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3);
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3);
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3);
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3);
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFF61, 0);
|
|
rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1);
|
|
rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1);
|
|
rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10);
|
|
rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2);
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B);
|
|
|
|
rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8187_start(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
|
|
rtl8187b_init_hw(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&priv->conf_mutex);
|
|
if (priv->is_rtl8187b) {
|
|
reg = RTL818X_RX_CONF_MGMT |
|
|
RTL818X_RX_CONF_DATA |
|
|
RTL818X_RX_CONF_BROADCAST |
|
|
RTL818X_RX_CONF_NICMAC |
|
|
RTL818X_RX_CONF_BSSID |
|
|
(7 << 13 /* RX FIFO threshold NONE */) |
|
|
(7 << 10 /* MAX RX DMA */) |
|
|
RTL818X_RX_CONF_RX_AUTORESETPHY |
|
|
RTL818X_RX_CONF_ONLYERLPKT |
|
|
RTL818X_RX_CONF_MULTICAST;
|
|
priv->rx_conf = reg;
|
|
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->TX_CONF,
|
|
RTL818X_TX_CONF_HW_SEQNUM |
|
|
RTL818X_TX_CONF_DISREQQSIZE |
|
|
(7 << 8 /* short retry limit */) |
|
|
(7 << 0 /* long retry limit */) |
|
|
(7 << 21 /* MAX TX DMA */));
|
|
rtl8187_init_urbs(dev);
|
|
mutex_unlock(&priv->conf_mutex);
|
|
return 0;
|
|
}
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
|
|
rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
|
|
|
|
rtl8187_init_urbs(dev);
|
|
|
|
reg = RTL818X_RX_CONF_ONLYERLPKT |
|
|
RTL818X_RX_CONF_RX_AUTORESETPHY |
|
|
RTL818X_RX_CONF_BSSID |
|
|
RTL818X_RX_CONF_MGMT |
|
|
RTL818X_RX_CONF_DATA |
|
|
(7 << 13 /* RX FIFO threshold NONE */) |
|
|
(7 << 10 /* MAX RX DMA */) |
|
|
RTL818X_RX_CONF_BROADCAST |
|
|
RTL818X_RX_CONF_NICMAC;
|
|
|
|
priv->rx_conf = reg;
|
|
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
|
|
|
|
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
|
|
reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
|
|
reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
|
|
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
|
|
|
|
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
|
|
reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
|
|
reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
|
|
reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
|
|
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
|
|
|
|
reg = RTL818X_TX_CONF_CW_MIN |
|
|
(7 << 21 /* MAX TX DMA */) |
|
|
RTL818X_TX_CONF_NO_ICV;
|
|
rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
|
|
|
|
reg = rtl818x_ioread8(priv, &priv->map->CMD);
|
|
reg |= RTL818X_CMD_TX_ENABLE;
|
|
reg |= RTL818X_CMD_RX_ENABLE;
|
|
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
|
|
mutex_unlock(&priv->conf_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rtl8187_stop(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
struct rtl8187_rx_info *info;
|
|
struct sk_buff *skb;
|
|
u32 reg;
|
|
|
|
mutex_lock(&priv->conf_mutex);
|
|
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
|
|
|
|
reg = rtl818x_ioread8(priv, &priv->map->CMD);
|
|
reg &= ~RTL818X_CMD_TX_ENABLE;
|
|
reg &= ~RTL818X_CMD_RX_ENABLE;
|
|
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
|
|
|
|
priv->rf->stop(dev);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
while ((skb = skb_dequeue(&priv->rx_queue))) {
|
|
info = (struct rtl8187_rx_info *)skb->cb;
|
|
usb_kill_urb(info->urb);
|
|
kfree_skb(skb);
|
|
}
|
|
mutex_unlock(&priv->conf_mutex);
|
|
}
|
|
|
|
static int rtl8187_add_interface(struct ieee80211_hw *dev,
|
|
struct ieee80211_if_init_conf *conf)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
int i;
|
|
|
|
if (priv->mode != NL80211_IFTYPE_MONITOR)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (conf->type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
priv->mode = conf->type;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
mutex_lock(&priv->conf_mutex);
|
|
priv->vif = conf->vif;
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
rtl818x_iowrite8(priv, &priv->map->MAC[i],
|
|
((u8 *)conf->mac_addr)[i]);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
mutex_unlock(&priv->conf_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static void rtl8187_remove_interface(struct ieee80211_hw *dev,
|
|
struct ieee80211_if_init_conf *conf)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
mutex_lock(&priv->conf_mutex);
|
|
priv->mode = NL80211_IFTYPE_MONITOR;
|
|
priv->vif = NULL;
|
|
mutex_unlock(&priv->conf_mutex);
|
|
}
|
|
|
|
static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
u32 reg;
|
|
|
|
mutex_lock(&priv->conf_mutex);
|
|
reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
|
|
/* Enable TX loopback on MAC level to avoid TX during channel
|
|
* changes, as this has be seen to causes problems and the
|
|
* card will stop work until next reset
|
|
*/
|
|
rtl818x_iowrite32(priv, &priv->map->TX_CONF,
|
|
reg | RTL818X_TX_CONF_LOOPBACK_MAC);
|
|
msleep(10);
|
|
priv->rf->set_chan(dev, conf);
|
|
msleep(10);
|
|
rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
|
|
|
|
if (!priv->is_rtl8187b) {
|
|
rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
|
|
|
|
if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
|
|
rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
|
|
rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
|
|
rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
|
|
rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
|
|
} else {
|
|
rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
|
|
rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
|
|
rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
|
|
rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
|
|
}
|
|
}
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
|
|
rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
|
|
rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
|
|
rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
|
|
mutex_unlock(&priv->conf_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8187_config_interface(struct ieee80211_hw *dev,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_if_conf *conf)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
int i;
|
|
u8 reg;
|
|
|
|
mutex_lock(&priv->conf_mutex);
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
|
|
|
|
if (is_valid_ether_addr(conf->bssid)) {
|
|
reg = RTL818X_MSR_INFRA;
|
|
if (priv->is_rtl8187b)
|
|
reg |= RTL818X_MSR_ENEDCA;
|
|
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
|
|
} else {
|
|
reg = RTL818X_MSR_NO_LINK;
|
|
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
|
|
}
|
|
|
|
mutex_unlock(&priv->conf_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static void rtl8187_configure_filter(struct ieee80211_hw *dev,
|
|
unsigned int changed_flags,
|
|
unsigned int *total_flags,
|
|
int mc_count, struct dev_addr_list *mclist)
|
|
{
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
|
|
if (changed_flags & FIF_FCSFAIL)
|
|
priv->rx_conf ^= RTL818X_RX_CONF_FCS;
|
|
if (changed_flags & FIF_CONTROL)
|
|
priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
|
|
if (changed_flags & FIF_OTHER_BSS)
|
|
priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
|
|
if (*total_flags & FIF_ALLMULTI || mc_count > 0)
|
|
priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
|
|
else
|
|
priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
|
|
|
|
*total_flags = 0;
|
|
|
|
if (priv->rx_conf & RTL818X_RX_CONF_FCS)
|
|
*total_flags |= FIF_FCSFAIL;
|
|
if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
|
|
*total_flags |= FIF_CONTROL;
|
|
if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
|
|
*total_flags |= FIF_OTHER_BSS;
|
|
if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
|
|
*total_flags |= FIF_ALLMULTI;
|
|
|
|
rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
|
|
}
|
|
|
|
static const struct ieee80211_ops rtl8187_ops = {
|
|
.tx = rtl8187_tx,
|
|
.start = rtl8187_start,
|
|
.stop = rtl8187_stop,
|
|
.add_interface = rtl8187_add_interface,
|
|
.remove_interface = rtl8187_remove_interface,
|
|
.config = rtl8187_config,
|
|
.config_interface = rtl8187_config_interface,
|
|
.configure_filter = rtl8187_configure_filter,
|
|
};
|
|
|
|
static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
|
|
{
|
|
struct ieee80211_hw *dev = eeprom->data;
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
|
|
eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
|
|
eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
|
|
eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
|
|
eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
|
|
}
|
|
|
|
static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
|
|
{
|
|
struct ieee80211_hw *dev = eeprom->data;
|
|
struct rtl8187_priv *priv = dev->priv;
|
|
u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
|
|
|
|
if (eeprom->reg_data_in)
|
|
reg |= RTL818X_EEPROM_CMD_WRITE;
|
|
if (eeprom->reg_data_out)
|
|
reg |= RTL818X_EEPROM_CMD_READ;
|
|
if (eeprom->reg_data_clock)
|
|
reg |= RTL818X_EEPROM_CMD_CK;
|
|
if (eeprom->reg_chip_select)
|
|
reg |= RTL818X_EEPROM_CMD_CS;
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
|
|
udelay(10);
|
|
}
|
|
|
|
static int __devinit rtl8187_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
struct ieee80211_hw *dev;
|
|
struct rtl8187_priv *priv;
|
|
struct eeprom_93cx6 eeprom;
|
|
struct ieee80211_channel *channel;
|
|
const char *chip_name;
|
|
u16 txpwr, reg;
|
|
int err, i;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
|
|
if (!dev) {
|
|
printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv = dev->priv;
|
|
priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
|
|
|
|
SET_IEEE80211_DEV(dev, &intf->dev);
|
|
usb_set_intfdata(intf, dev);
|
|
priv->udev = udev;
|
|
|
|
usb_get_dev(udev);
|
|
|
|
skb_queue_head_init(&priv->rx_queue);
|
|
|
|
BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
|
|
BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
|
|
|
|
memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
|
|
memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
|
|
priv->map = (struct rtl818x_csr *)0xFF00;
|
|
|
|
priv->band.band = IEEE80211_BAND_2GHZ;
|
|
priv->band.channels = priv->channels;
|
|
priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
|
|
priv->band.bitrates = priv->rates;
|
|
priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
|
|
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
|
|
|
|
|
|
priv->mode = NL80211_IFTYPE_MONITOR;
|
|
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
|
|
IEEE80211_HW_RX_INCLUDES_FCS;
|
|
|
|
eeprom.data = dev;
|
|
eeprom.register_read = rtl8187_eeprom_register_read;
|
|
eeprom.register_write = rtl8187_eeprom_register_write;
|
|
if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
|
|
eeprom.width = PCI_EEPROM_WIDTH_93C66;
|
|
else
|
|
eeprom.width = PCI_EEPROM_WIDTH_93C46;
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
udelay(10);
|
|
|
|
eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
|
|
(__le16 __force *)dev->wiphy->perm_addr, 3);
|
|
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
|
|
printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
|
|
"generated MAC address\n");
|
|
random_ether_addr(dev->wiphy->perm_addr);
|
|
}
|
|
|
|
channel = priv->channels;
|
|
for (i = 0; i < 3; i++) {
|
|
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
|
|
&txpwr);
|
|
(*channel++).hw_value = txpwr & 0xFF;
|
|
(*channel++).hw_value = txpwr >> 8;
|
|
}
|
|
for (i = 0; i < 2; i++) {
|
|
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
|
|
&txpwr);
|
|
(*channel++).hw_value = txpwr & 0xFF;
|
|
(*channel++).hw_value = txpwr >> 8;
|
|
}
|
|
|
|
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
|
|
&priv->txpwr_base);
|
|
|
|
reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
|
|
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
|
|
/* 0 means asic B-cut, we should use SW 3 wire
|
|
* bit-by-bit banging for radio. 1 means we can use
|
|
* USB specific request to write radio registers */
|
|
priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
|
|
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
if (!priv->is_rtl8187b) {
|
|
u32 reg32;
|
|
reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF);
|
|
reg32 &= RTL818X_TX_CONF_HWVER_MASK;
|
|
switch (reg32) {
|
|
case RTL818X_TX_CONF_R8187vD_B:
|
|
/* Some RTL8187B devices have a USB ID of 0x8187
|
|
* detect them here */
|
|
chip_name = "RTL8187BvB(early)";
|
|
priv->is_rtl8187b = 1;
|
|
priv->hw_rev = RTL8187BvB;
|
|
break;
|
|
case RTL818X_TX_CONF_R8187vD:
|
|
chip_name = "RTL8187vD";
|
|
break;
|
|
default:
|
|
chip_name = "RTL8187vB (default)";
|
|
}
|
|
} else {
|
|
/*
|
|
* Force USB request to write radio registers for 8187B, Realtek
|
|
* only uses it in their sources
|
|
*/
|
|
/*if (priv->asic_rev == 0) {
|
|
printk(KERN_WARNING "rtl8187: Forcing use of USB "
|
|
"requests to write to radio registers\n");
|
|
priv->asic_rev = 1;
|
|
}*/
|
|
switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
|
|
case RTL818X_R8187B_B:
|
|
chip_name = "RTL8187BvB";
|
|
priv->hw_rev = RTL8187BvB;
|
|
break;
|
|
case RTL818X_R8187B_D:
|
|
chip_name = "RTL8187BvD";
|
|
priv->hw_rev = RTL8187BvD;
|
|
break;
|
|
case RTL818X_R8187B_E:
|
|
chip_name = "RTL8187BvE";
|
|
priv->hw_rev = RTL8187BvE;
|
|
break;
|
|
default:
|
|
chip_name = "RTL8187BvB (default)";
|
|
priv->hw_rev = RTL8187BvB;
|
|
}
|
|
}
|
|
|
|
if (!priv->is_rtl8187b) {
|
|
for (i = 0; i < 2; i++) {
|
|
eeprom_93cx6_read(&eeprom,
|
|
RTL8187_EEPROM_TXPWR_CHAN_6 + i,
|
|
&txpwr);
|
|
(*channel++).hw_value = txpwr & 0xFF;
|
|
(*channel++).hw_value = txpwr >> 8;
|
|
}
|
|
} else {
|
|
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6,
|
|
&txpwr);
|
|
(*channel++).hw_value = txpwr & 0xFF;
|
|
|
|
eeprom_93cx6_read(&eeprom, 0x0A, &txpwr);
|
|
(*channel++).hw_value = txpwr & 0xFF;
|
|
|
|
eeprom_93cx6_read(&eeprom, 0x1C, &txpwr);
|
|
(*channel++).hw_value = txpwr & 0xFF;
|
|
(*channel++).hw_value = txpwr >> 8;
|
|
}
|
|
|
|
if (priv->is_rtl8187b) {
|
|
printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
|
|
"is EXPERIMENTAL, and could damage your\n"
|
|
" hardware, use at your own risk\n");
|
|
dev->flags |= IEEE80211_HW_SIGNAL_DBM;
|
|
} else {
|
|
dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
|
|
dev->max_signal = 65;
|
|
}
|
|
|
|
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
|
|
|
|
if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
|
|
printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
|
|
" info!\n");
|
|
|
|
priv->rf = rtl8187_detect_rf(dev);
|
|
dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
|
|
sizeof(struct rtl8187_tx_hdr) :
|
|
sizeof(struct rtl8187b_tx_hdr);
|
|
if (!priv->is_rtl8187b)
|
|
dev->queues = 1;
|
|
else
|
|
dev->queues = 4;
|
|
|
|
err = ieee80211_register_hw(dev);
|
|
if (err) {
|
|
printk(KERN_ERR "rtl8187: Cannot register device\n");
|
|
goto err_free_dev;
|
|
}
|
|
mutex_init(&priv->conf_mutex);
|
|
|
|
printk(KERN_INFO "%s: hwaddr %s, %s V%d + %s\n",
|
|
wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
|
|
chip_name, priv->asic_rev, priv->rf->name);
|
|
|
|
return 0;
|
|
|
|
err_free_dev:
|
|
ieee80211_free_hw(dev);
|
|
usb_set_intfdata(intf, NULL);
|
|
usb_put_dev(udev);
|
|
return err;
|
|
}
|
|
|
|
static void __devexit rtl8187_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct ieee80211_hw *dev = usb_get_intfdata(intf);
|
|
struct rtl8187_priv *priv;
|
|
|
|
if (!dev)
|
|
return;
|
|
|
|
ieee80211_unregister_hw(dev);
|
|
|
|
priv = dev->priv;
|
|
usb_put_dev(interface_to_usbdev(intf));
|
|
ieee80211_free_hw(dev);
|
|
}
|
|
|
|
static struct usb_driver rtl8187_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = rtl8187_table,
|
|
.probe = rtl8187_probe,
|
|
.disconnect = __devexit_p(rtl8187_disconnect),
|
|
};
|
|
|
|
static int __init rtl8187_init(void)
|
|
{
|
|
return usb_register(&rtl8187_driver);
|
|
}
|
|
|
|
static void __exit rtl8187_exit(void)
|
|
{
|
|
usb_deregister(&rtl8187_driver);
|
|
}
|
|
|
|
module_init(rtl8187_init);
|
|
module_exit(rtl8187_exit);
|