android_kernel_xiaomi_sm8350/drivers/usb
Sarah Sharp 6b403b020c USB: Add SuperSpeed to the list of USB device speeds.
Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed".  This
is 5.0 Gbps (wire speed).  There are probably more places that check for
speed that I've missed.

SuperSpeed devices have a 512 byte endpoint 0 max packet size.  This shows
up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus
spec).

xHCI spec says that the xHC can handle intervals up to 2^15 microframes.  That
might change when real silicon becomes available.

Add FIXME note for SuperSpeed isochronous endpoints.  They can transmit up
to 16 packets in one "burst" before they wait for an acknowledgment of the
packets.  They can do up to 3 bursts per microframe (determined by the
mult value in the endpoint companion descriptor).  The xHCI driver doesn't
have support for isoc yet, so fix this later.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:48 -07:00
..
atm USB: cxacru: Fix negative dB output 2009-05-08 19:34:56 -07:00
c67x00
class USB: usbtmc: fix switch statment 2009-06-15 21:44:48 -07:00
core USB: Add SuperSpeed to the list of USB device speeds. 2009-06-15 21:44:48 -07:00
gadget USB: atmel_usba_udc: change way of specifying bias function 2009-06-15 21:44:47 -07:00
host USB: xhci: No-op command queueing and irq handler. 2009-06-15 21:44:48 -07:00
image USB: replace uses of __constant_{endian} 2009-03-24 16:20:33 -07:00
misc USB: usbtest fix endless loop in unlink tests. 2009-06-15 21:44:48 -07:00
mon USB: usbmon: use the new usb debugfs directory 2009-06-15 21:44:43 -07:00
musb usb: musb: disable OTG AUTOIDLE only with omap3430 2009-06-15 21:44:46 -07:00
otg USB: Add Intel Langwell USB OTG Transceiver Drive 2009-06-15 21:44:47 -07:00
serial USB: usb-serial: replace shutdown with disconnect, release 2009-06-15 21:44:47 -07:00
storage USB: usb-storage: add filter to "option_ms" to leave unrecognized devices alone 2009-06-15 21:44:46 -07:00
wusbcore WUSB: correct format of wusb_chid sysfs file 2009-04-17 10:50:29 -07:00
Kconfig usb: return device strings in UTF-8 2009-06-15 21:44:43 -07:00
Makefile Revert "USB: Correct Makefile to make isp1760 buildable" 2009-05-28 13:54:43 -07:00
README
usb-skeleton.c USB: skeleton: Use dev_info instead of info 2009-03-24 16:20:30 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.