android_kernel_xiaomi_sm8350/arch/powerpc/boot/dts/mpc866ads.dts
Jochen Friedrich a5d28c8e64 powerpc/CPM: Add i2c pins to dts and board setup
Initialize I2C pins on boards with CPM1/CPM2 controllers and document the
i2c bus in booting-without-of.

The boards don't have any I2C chips connected to the I2C bus, so unless
some external chips are connected to the boards, this code is just an
example of setting everything else up.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14 07:55:39 -05:00

192 lines
4.2 KiB
Plaintext

/*
* MPC866 ADS Device Tree Source
*
* Copyright 2006 MontaVista Software, Inc.
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "MPC866ADS";
compatible = "fsl,mpc866ads";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,866@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <16>; // 16 bytes
i-cache-line-size = <16>; // 16 bytes
d-cache-size = <0x2000>; // L1, 8K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x800000>;
};
localbus@ff000100 {
compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xff000100 0x40>;
ranges = <
0x1 0x0 0xff080000 0x8000
0x5 0x0 0xff0a0000 0x8000
>;
board-control@1,0 {
reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
compatible = "fsl,mpc866ads-bcsr";
};
};
soc@ff000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xff000000 0x100000>;
reg = <0xff000000 0x200>;
bus-frequency = <0>;
mdio@e00 {
compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY: ethernet-phy@f {
reg = <0xf>;
device_type = "ethernet-phy";
};
};
ethernet@e00 {
device_type = "network";
compatible = "fsl,mpc866-fec-enet",
"fsl,pq1-fec-enet";
reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY>;
linux,network-index = <0>;
};
PIC: pic@0 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x24>;
compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc866-cpm", "fsl,cpm1";
ranges;
reg = <0x9c0 0x40>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0x0 0x1c00>;
};
};
brg@9f0 {
compatible = "fsl,mpc866-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
reg = <0x9f0 0x10>;
clock-frequency = <0>;
};
CPM_PIC: pic@930 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
reg = <0x930 0x20>;
compatible = "fsl,mpc866-cpm-pic",
"fsl,cpm1-pic";
};
serial@a80 {
device_type = "serial";
compatible = "fsl,mpc866-smc-uart",
"fsl,cpm1-smc-uart";
reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0x90>;
};
serial@a90 {
device_type = "serial";
compatible = "fsl,mpc866-smc-uart",
"fsl,cpm1-smc-uart";
reg = <0xa90 0x10 0x3f80 0x40>;
interrupts = <3>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <0xd0>;
};
ethernet@a00 {
device_type = "network";
compatible = "fsl,mpc866-scc-enet",
"fsl,cpm1-scc-enet";
reg = <0xa00 0x18 0x3c00 0x100>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <30>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-command = <0000>;
linux,network-index = <1>;
};
i2c@860 {
compatible = "fsl,mpc866-i2c",
"fsl,cpm1-i2c";
reg = <0x860 0x20 0x3c80 0x30>;
interrupts = <16>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-command = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
chosen {
linux,stdout-path = "/soc/cpm/serial@a80";
};
};