249bb070f5
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
369 lines
10 KiB
C
369 lines
10 KiB
C
/*
|
|
SMBus driver for nVidia nForce2 MCP
|
|
|
|
Added nForce3 Pro 150 Thomas Leibold <thomas@plx.com>,
|
|
Ported to 2.5 Patrick Dreker <patrick@dreker.de>,
|
|
Copyright (c) 2003 Hans-Frieder Vogt <hfvogt@arcor.de>,
|
|
Based on
|
|
SMBus 2.0 driver for AMD-8111 IO-Hub
|
|
Copyright (c) 2002 Vojtech Pavlik
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/*
|
|
SUPPORTED DEVICES PCI ID
|
|
nForce2 MCP 0064
|
|
nForce2 Ultra 400 MCP 0084
|
|
nForce3 Pro150 MCP 00D4
|
|
nForce3 250Gb MCP 00E4
|
|
nForce4 MCP 0052
|
|
|
|
This driver supports the 2 SMBuses that are included in the MCP of the
|
|
nForce2/3/4 chipsets.
|
|
*/
|
|
|
|
/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");
|
|
MODULE_DESCRIPTION("nForce2 SMBus driver");
|
|
|
|
|
|
struct nforce2_smbus {
|
|
struct pci_dev *dev;
|
|
struct i2c_adapter adapter;
|
|
int base;
|
|
int size;
|
|
};
|
|
|
|
|
|
/*
|
|
* nVidia nForce2 SMBus control register definitions
|
|
*/
|
|
#define NFORCE_PCI_SMB1 0x50
|
|
#define NFORCE_PCI_SMB2 0x54
|
|
|
|
|
|
/*
|
|
* ACPI 2.0 chapter 13 SMBus 2.0 EC register model
|
|
*/
|
|
#define NVIDIA_SMB_PRTCL (smbus->base + 0x00) /* protocol, PEC */
|
|
#define NVIDIA_SMB_STS (smbus->base + 0x01) /* status */
|
|
#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */
|
|
#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */
|
|
#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */
|
|
#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */
|
|
#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */
|
|
#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */
|
|
|
|
#define NVIDIA_SMB_STS_DONE 0x80
|
|
#define NVIDIA_SMB_STS_ALRM 0x40
|
|
#define NVIDIA_SMB_STS_RES 0x20
|
|
#define NVIDIA_SMB_STS_STATUS 0x1f
|
|
|
|
#define NVIDIA_SMB_PRTCL_WRITE 0x00
|
|
#define NVIDIA_SMB_PRTCL_READ 0x01
|
|
#define NVIDIA_SMB_PRTCL_QUICK 0x02
|
|
#define NVIDIA_SMB_PRTCL_BYTE 0x04
|
|
#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06
|
|
#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08
|
|
#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a
|
|
#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c
|
|
#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d
|
|
#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
|
|
#define NVIDIA_SMB_PRTCL_PEC 0x80
|
|
|
|
static struct pci_driver nforce2_driver;
|
|
|
|
static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write,
|
|
u8 command, int size, union i2c_smbus_data *data);
|
|
static u32 nforce2_func(struct i2c_adapter *adapter);
|
|
|
|
|
|
static struct i2c_algorithm smbus_algorithm = {
|
|
.smbus_xfer = nforce2_access,
|
|
.functionality = nforce2_func,
|
|
};
|
|
|
|
static struct i2c_adapter nforce2_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.class = I2C_CLASS_HWMON,
|
|
.algo = &smbus_algorithm,
|
|
};
|
|
|
|
/* Return -1 on error. See smbus.h for more information */
|
|
static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
|
|
unsigned short flags, char read_write,
|
|
u8 command, int size, union i2c_smbus_data * data)
|
|
{
|
|
struct nforce2_smbus *smbus = adap->algo_data;
|
|
unsigned char protocol, pec, temp;
|
|
unsigned char len = 0; /* to keep the compiler quiet */
|
|
int i;
|
|
|
|
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
|
|
NVIDIA_SMB_PRTCL_WRITE;
|
|
pec = (flags & I2C_CLIENT_PEC) ? NVIDIA_SMB_PRTCL_PEC : 0;
|
|
|
|
switch (size) {
|
|
|
|
case I2C_SMBUS_QUICK:
|
|
protocol |= NVIDIA_SMB_PRTCL_QUICK;
|
|
read_write = I2C_SMBUS_WRITE;
|
|
break;
|
|
|
|
case I2C_SMBUS_BYTE:
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
outb_p(command, NVIDIA_SMB_CMD);
|
|
protocol |= NVIDIA_SMB_PRTCL_BYTE;
|
|
break;
|
|
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
outb_p(command, NVIDIA_SMB_CMD);
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
outb_p(data->byte, NVIDIA_SMB_DATA);
|
|
protocol |= NVIDIA_SMB_PRTCL_BYTE_DATA;
|
|
break;
|
|
|
|
case I2C_SMBUS_WORD_DATA:
|
|
outb_p(command, NVIDIA_SMB_CMD);
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
outb_p(data->word, NVIDIA_SMB_DATA);
|
|
outb_p(data->word >> 8, NVIDIA_SMB_DATA+1);
|
|
}
|
|
protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
|
|
break;
|
|
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
outb_p(command, NVIDIA_SMB_CMD);
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
len = min_t(u8, data->block[0], 32);
|
|
outb_p(len, NVIDIA_SMB_BCNT);
|
|
for (i = 0; i < len; i++)
|
|
outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
|
|
}
|
|
protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
|
|
break;
|
|
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
len = min_t(u8, data->block[0], 32);
|
|
outb_p(command, NVIDIA_SMB_CMD);
|
|
outb_p(len, NVIDIA_SMB_BCNT);
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
for (i = 0; i < len; i++)
|
|
outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
|
|
protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA;
|
|
break;
|
|
|
|
case I2C_SMBUS_PROC_CALL:
|
|
dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
|
|
return -1;
|
|
|
|
case I2C_SMBUS_BLOCK_PROC_CALL:
|
|
dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
|
|
return -1;
|
|
|
|
default:
|
|
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
|
|
return -1;
|
|
}
|
|
|
|
outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR);
|
|
outb_p(protocol, NVIDIA_SMB_PRTCL);
|
|
|
|
temp = inb_p(NVIDIA_SMB_STS);
|
|
|
|
if (~temp & NVIDIA_SMB_STS_DONE) {
|
|
udelay(500);
|
|
temp = inb_p(NVIDIA_SMB_STS);
|
|
}
|
|
if (~temp & NVIDIA_SMB_STS_DONE) {
|
|
msleep(10);
|
|
temp = inb_p(NVIDIA_SMB_STS);
|
|
}
|
|
|
|
if ((~temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
|
|
dev_dbg(&adap->dev, "SMBus Timeout! (0x%02x)\n", temp);
|
|
return -1;
|
|
}
|
|
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
return 0;
|
|
|
|
switch (size) {
|
|
|
|
case I2C_SMBUS_BYTE:
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
data->byte = inb_p(NVIDIA_SMB_DATA);
|
|
break;
|
|
|
|
case I2C_SMBUS_WORD_DATA:
|
|
/* case I2C_SMBUS_PROC_CALL: not supported */
|
|
data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
|
|
break;
|
|
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
/* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */
|
|
len = inb_p(NVIDIA_SMB_BCNT);
|
|
len = min_t(u8, len, 32);
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
for (i = 0; i < len; i++)
|
|
data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
|
|
data->block[0] = len;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static u32 nforce2_func(struct i2c_adapter *adapter)
|
|
{
|
|
/* other functionality might be possible, but is not tested */
|
|
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA */;
|
|
}
|
|
|
|
|
|
static struct pci_device_id nforce2_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) },
|
|
{ 0 }
|
|
};
|
|
|
|
|
|
MODULE_DEVICE_TABLE (pci, nforce2_ids);
|
|
|
|
|
|
static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
|
|
struct nforce2_smbus *smbus, char *name)
|
|
{
|
|
u16 iobase;
|
|
int error;
|
|
|
|
if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) {
|
|
dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name);
|
|
return -1;
|
|
}
|
|
smbus->dev = dev;
|
|
smbus->base = iobase & 0xfffc;
|
|
smbus->size = 8;
|
|
|
|
if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
|
|
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
|
|
smbus->base, smbus->base+smbus->size-1, name);
|
|
return -1;
|
|
}
|
|
smbus->adapter = nforce2_adapter;
|
|
smbus->adapter.algo_data = smbus;
|
|
smbus->adapter.dev.parent = &dev->dev;
|
|
snprintf(smbus->adapter.name, I2C_NAME_SIZE,
|
|
"SMBus nForce2 adapter at %04x", smbus->base);
|
|
|
|
error = i2c_add_adapter(&smbus->adapter);
|
|
if (error) {
|
|
dev_err(&smbus->adapter.dev, "Failed to register adapter.\n");
|
|
release_region(smbus->base, smbus->size);
|
|
return -1;
|
|
}
|
|
dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct nforce2_smbus *smbuses;
|
|
int res1, res2;
|
|
|
|
/* we support 2 SMBus adapters */
|
|
if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL)))
|
|
return -ENOMEM;
|
|
pci_set_drvdata(dev, smbuses);
|
|
|
|
/* SMBus adapter 1 */
|
|
res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
|
|
if (res1 < 0) {
|
|
dev_err(&dev->dev, "Error probing SMB1.\n");
|
|
smbuses[0].base = 0; /* to have a check value */
|
|
}
|
|
res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
|
|
if (res2 < 0) {
|
|
dev_err(&dev->dev, "Error probing SMB2.\n");
|
|
smbuses[1].base = 0; /* to have a check value */
|
|
}
|
|
if ((res1 < 0) && (res2 < 0)) {
|
|
/* we did not find even one of the SMBuses, so we give up */
|
|
kfree(smbuses);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void __devexit nforce2_remove(struct pci_dev *dev)
|
|
{
|
|
struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev);
|
|
|
|
if (smbuses[0].base) {
|
|
i2c_del_adapter(&smbuses[0].adapter);
|
|
release_region(smbuses[0].base, smbuses[0].size);
|
|
}
|
|
if (smbuses[1].base) {
|
|
i2c_del_adapter(&smbuses[1].adapter);
|
|
release_region(smbuses[1].base, smbuses[1].size);
|
|
}
|
|
kfree(smbuses);
|
|
}
|
|
|
|
static struct pci_driver nforce2_driver = {
|
|
.name = "nForce2_smbus",
|
|
.id_table = nforce2_ids,
|
|
.probe = nforce2_probe,
|
|
.remove = __devexit_p(nforce2_remove),
|
|
};
|
|
|
|
static int __init nforce2_init(void)
|
|
{
|
|
return pci_register_driver(&nforce2_driver);
|
|
}
|
|
|
|
static void __exit nforce2_exit(void)
|
|
{
|
|
pci_unregister_driver(&nforce2_driver);
|
|
}
|
|
|
|
module_init(nforce2_init);
|
|
module_exit(nforce2_exit);
|
|
|