aa62999269
fix bootup crash in native_read_tsc() that was reported on an Athlon-XP and bisected. The correct feature boundary for X86_FEATURE_MFENCE_RDTSC is not XMM but XMM2. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
348 lines
8.8 KiB
C
348 lines
8.8 KiB
C
#include <linux/init.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mm.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/apic.h>
|
|
#include <asm/mach_apic.h>
|
|
|
|
#include "cpu.h"
|
|
|
|
/*
|
|
* B step AMD K6 before B 9730xxxx have hardware bugs that can cause
|
|
* misexecution of code under Linux. Owners of such processors should
|
|
* contact AMD for precise details and a CPU swap.
|
|
*
|
|
* See http://www.multimania.com/poulot/k6bug.html
|
|
* http://www.amd.com/K6/k6docs/revgd.html
|
|
*
|
|
* The following test is erm.. interesting. AMD neglected to up
|
|
* the chip setting when fixing the bug but they also tweaked some
|
|
* performance at the same time..
|
|
*/
|
|
|
|
extern void vide(void);
|
|
__asm__(".align 4\nvide: ret");
|
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
#define ENABLE_C1E_MASK 0x18000000
|
|
#define CPUID_PROCESSOR_SIGNATURE 1
|
|
#define CPUID_XFAM 0x0ff00000
|
|
#define CPUID_XFAM_K8 0x00000000
|
|
#define CPUID_XFAM_10H 0x00100000
|
|
#define CPUID_XFAM_11H 0x00200000
|
|
#define CPUID_XMOD 0x000f0000
|
|
#define CPUID_XMOD_REV_F 0x00040000
|
|
|
|
/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
|
|
static __cpuinit int amd_apic_timer_broken(void)
|
|
{
|
|
u32 lo, hi;
|
|
u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
|
|
switch (eax & CPUID_XFAM) {
|
|
case CPUID_XFAM_K8:
|
|
if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
|
|
break;
|
|
case CPUID_XFAM_10H:
|
|
case CPUID_XFAM_11H:
|
|
rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
|
|
if (lo & ENABLE_C1E_MASK) {
|
|
if (smp_processor_id() != boot_cpu_physical_apicid)
|
|
printk(KERN_INFO "AMD C1E detected late. "
|
|
" Force timer broadcast.\n");
|
|
return 1;
|
|
}
|
|
break;
|
|
default:
|
|
/* err on the side of caution */
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int force_mwait __cpuinitdata;
|
|
|
|
void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
|
|
{
|
|
if (cpuid_eax(0x80000000) >= 0x80000007) {
|
|
c->x86_power = cpuid_edx(0x80000007);
|
|
if (c->x86_power & (1<<8))
|
|
set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
|
|
}
|
|
}
|
|
|
|
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
|
|
{
|
|
u32 l, h;
|
|
int mbytes = num_physpages >> (20-PAGE_SHIFT);
|
|
int r;
|
|
|
|
#ifdef CONFIG_SMP
|
|
unsigned long long value;
|
|
|
|
/* Disable TLB flush filter by setting HWCR.FFDIS on K8
|
|
* bit 6 of msr C001_0015
|
|
*
|
|
* Errata 63 for SH-B3 steppings
|
|
* Errata 122 for all steppings (F+ have it disabled by default)
|
|
*/
|
|
if (c->x86 == 15) {
|
|
rdmsrl(MSR_K7_HWCR, value);
|
|
value |= 1 << 6;
|
|
wrmsrl(MSR_K7_HWCR, value);
|
|
}
|
|
#endif
|
|
|
|
early_init_amd(c);
|
|
|
|
/*
|
|
* FIXME: We should handle the K5 here. Set up the write
|
|
* range and also turn on MSR 83 bits 4 and 31 (write alloc,
|
|
* no bus pipeline)
|
|
*/
|
|
|
|
/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
|
|
3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
|
|
clear_bit(0*32+31, c->x86_capability);
|
|
|
|
r = get_model_name(c);
|
|
|
|
switch(c->x86)
|
|
{
|
|
case 4:
|
|
/*
|
|
* General Systems BIOSen alias the cpu frequency registers
|
|
* of the Elan at 0x000df000. Unfortuantly, one of the Linux
|
|
* drivers subsequently pokes it, and changes the CPU speed.
|
|
* Workaround : Remove the unneeded alias.
|
|
*/
|
|
#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
|
|
#define CBAR_ENB (0x80000000)
|
|
#define CBAR_KEY (0X000000CB)
|
|
if (c->x86_model==9 || c->x86_model == 10) {
|
|
if (inl (CBAR) & CBAR_ENB)
|
|
outl (0 | CBAR_KEY, CBAR);
|
|
}
|
|
break;
|
|
case 5:
|
|
if( c->x86_model < 6 )
|
|
{
|
|
/* Based on AMD doc 20734R - June 2000 */
|
|
if ( c->x86_model == 0 ) {
|
|
clear_bit(X86_FEATURE_APIC, c->x86_capability);
|
|
set_bit(X86_FEATURE_PGE, c->x86_capability);
|
|
}
|
|
break;
|
|
}
|
|
|
|
if ( c->x86_model == 6 && c->x86_mask == 1 ) {
|
|
const int K6_BUG_LOOP = 1000000;
|
|
int n;
|
|
void (*f_vide)(void);
|
|
unsigned long d, d2;
|
|
|
|
printk(KERN_INFO "AMD K6 stepping B detected - ");
|
|
|
|
/*
|
|
* It looks like AMD fixed the 2.6.2 bug and improved indirect
|
|
* calls at the same time.
|
|
*/
|
|
|
|
n = K6_BUG_LOOP;
|
|
f_vide = vide;
|
|
rdtscl(d);
|
|
while (n--)
|
|
f_vide();
|
|
rdtscl(d2);
|
|
d = d2-d;
|
|
|
|
if (d > 20*K6_BUG_LOOP)
|
|
printk("system stability may be impaired when more than 32 MB are used.\n");
|
|
else
|
|
printk("probably OK (after B9730xxxx).\n");
|
|
printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
|
|
}
|
|
|
|
/* K6 with old style WHCR */
|
|
if (c->x86_model < 8 ||
|
|
(c->x86_model== 8 && c->x86_mask < 8)) {
|
|
/* We can only write allocate on the low 508Mb */
|
|
if(mbytes>508)
|
|
mbytes=508;
|
|
|
|
rdmsr(MSR_K6_WHCR, l, h);
|
|
if ((l&0x0000FFFF)==0) {
|
|
unsigned long flags;
|
|
l=(1<<0)|((mbytes/4)<<1);
|
|
local_irq_save(flags);
|
|
wbinvd();
|
|
wrmsr(MSR_K6_WHCR, l, h);
|
|
local_irq_restore(flags);
|
|
printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
|
|
mbytes);
|
|
}
|
|
break;
|
|
}
|
|
|
|
if ((c->x86_model == 8 && c->x86_mask >7) ||
|
|
c->x86_model == 9 || c->x86_model == 13) {
|
|
/* The more serious chips .. */
|
|
|
|
if(mbytes>4092)
|
|
mbytes=4092;
|
|
|
|
rdmsr(MSR_K6_WHCR, l, h);
|
|
if ((l&0xFFFF0000)==0) {
|
|
unsigned long flags;
|
|
l=((mbytes>>2)<<22)|(1<<16);
|
|
local_irq_save(flags);
|
|
wbinvd();
|
|
wrmsr(MSR_K6_WHCR, l, h);
|
|
local_irq_restore(flags);
|
|
printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
|
|
mbytes);
|
|
}
|
|
|
|
/* Set MTRR capability flag if appropriate */
|
|
if (c->x86_model == 13 || c->x86_model == 9 ||
|
|
(c->x86_model == 8 && c->x86_mask >= 8))
|
|
set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
|
|
break;
|
|
}
|
|
|
|
if (c->x86_model == 10) {
|
|
/* AMD Geode LX is model 10 */
|
|
/* placeholder for any needed mods */
|
|
break;
|
|
}
|
|
break;
|
|
case 6: /* An Athlon/Duron */
|
|
|
|
/* Bit 15 of Athlon specific MSR 15, needs to be 0
|
|
* to enable SSE on Palomino/Morgan/Barton CPU's.
|
|
* If the BIOS didn't enable it already, enable it here.
|
|
*/
|
|
if (c->x86_model >= 6 && c->x86_model <= 10) {
|
|
if (!cpu_has(c, X86_FEATURE_XMM)) {
|
|
printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
|
|
rdmsr(MSR_K7_HWCR, l, h);
|
|
l &= ~0x00008000;
|
|
wrmsr(MSR_K7_HWCR, l, h);
|
|
set_bit(X86_FEATURE_XMM, c->x86_capability);
|
|
}
|
|
}
|
|
|
|
/* It's been determined by AMD that Athlons since model 8 stepping 1
|
|
* are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
|
|
* As per AMD technical note 27212 0.2
|
|
*/
|
|
if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) {
|
|
rdmsr(MSR_K7_CLK_CTL, l, h);
|
|
if ((l & 0xfff00000) != 0x20000000) {
|
|
printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
|
|
((l & 0x000fffff)|0x20000000));
|
|
wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
switch (c->x86) {
|
|
case 15:
|
|
/* Use K8 tuning for Fam10h and Fam11h */
|
|
case 0x10:
|
|
case 0x11:
|
|
set_bit(X86_FEATURE_K8, c->x86_capability);
|
|
break;
|
|
case 6:
|
|
set_bit(X86_FEATURE_K7, c->x86_capability);
|
|
break;
|
|
}
|
|
if (c->x86 >= 6)
|
|
set_bit(X86_FEATURE_FXSAVE_LEAK, c->x86_capability);
|
|
|
|
display_cacheinfo(c);
|
|
|
|
if (cpuid_eax(0x80000000) >= 0x80000008) {
|
|
c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_HT
|
|
/*
|
|
* On a AMD multi core setup the lower bits of the APIC id
|
|
* distinguish the cores.
|
|
*/
|
|
if (c->x86_max_cores > 1) {
|
|
int cpu = smp_processor_id();
|
|
unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf;
|
|
|
|
if (bits == 0) {
|
|
while ((1 << bits) < c->x86_max_cores)
|
|
bits++;
|
|
}
|
|
c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1);
|
|
c->phys_proc_id >>= bits;
|
|
printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
|
|
cpu, c->x86_max_cores, c->cpu_core_id);
|
|
}
|
|
#endif
|
|
|
|
if (cpuid_eax(0x80000000) >= 0x80000006) {
|
|
if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000))
|
|
num_cache_leaves = 4;
|
|
else
|
|
num_cache_leaves = 3;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
if (amd_apic_timer_broken())
|
|
local_apic_timer_disabled = 1;
|
|
#endif
|
|
|
|
/* K6s reports MCEs but don't actually have all the MSRs */
|
|
if (c->x86 < 6)
|
|
clear_bit(X86_FEATURE_MCE, c->x86_capability);
|
|
|
|
if (cpu_has_xmm2)
|
|
set_bit(X86_FEATURE_MFENCE_RDTSC, c->x86_capability);
|
|
}
|
|
|
|
static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
|
|
{
|
|
/* AMD errata T13 (order #21922) */
|
|
if ((c->x86 == 6)) {
|
|
if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */
|
|
size = 64;
|
|
if (c->x86_model == 4 &&
|
|
(c->x86_mask==0 || c->x86_mask==1)) /* Tbird rev A1/A2 */
|
|
size = 256;
|
|
}
|
|
return size;
|
|
}
|
|
|
|
static struct cpu_dev amd_cpu_dev __cpuinitdata = {
|
|
.c_vendor = "AMD",
|
|
.c_ident = { "AuthenticAMD" },
|
|
.c_models = {
|
|
{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
|
|
{
|
|
[3] = "486 DX/2",
|
|
[7] = "486 DX/2-WB",
|
|
[8] = "486 DX/4",
|
|
[9] = "486 DX/4-WB",
|
|
[14] = "Am5x86-WT",
|
|
[15] = "Am5x86-WB"
|
|
}
|
|
},
|
|
},
|
|
.c_init = init_amd,
|
|
.c_size_cache = amd_size_cache,
|
|
};
|
|
|
|
int __init amd_init_cpu(void)
|
|
{
|
|
cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
|
|
return 0;
|
|
}
|