58cda884ec
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
135 lines
4.5 KiB
C
135 lines
4.5 KiB
C
#ifndef ____ASM_ARCH_SDRC_H
|
|
#define ____ASM_ARCH_SDRC_H
|
|
|
|
/*
|
|
* OMAP2/3 SDRC/SMS register definitions
|
|
*
|
|
* Copyright (C) 2007-2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2007-2008 Nokia Corporation
|
|
*
|
|
* Tony Lindgren
|
|
* Paul Walmsley
|
|
* Richard Woodruff
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <mach/io.h>
|
|
|
|
/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
|
|
|
|
#define SDRC_SYSCONFIG 0x010
|
|
#define SDRC_DLLA_CTRL 0x060
|
|
#define SDRC_DLLA_STATUS 0x064
|
|
#define SDRC_DLLB_CTRL 0x068
|
|
#define SDRC_DLLB_STATUS 0x06C
|
|
#define SDRC_POWER 0x070
|
|
#define SDRC_MR_0 0x084
|
|
#define SDRC_ACTIM_CTRL_A_0 0x09c
|
|
#define SDRC_ACTIM_CTRL_B_0 0x0a0
|
|
#define SDRC_RFR_CTRL_0 0x0a4
|
|
#define SDRC_MR_1 0x0B4
|
|
#define SDRC_ACTIM_CTRL_A_1 0x0C4
|
|
#define SDRC_ACTIM_CTRL_B_1 0x0C8
|
|
#define SDRC_RFR_CTRL_1 0x0D4
|
|
|
|
/*
|
|
* These values represent the number of memory clock cycles between
|
|
* autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
|
|
* rows per device, and include a subtraction of a 50 cycle window in the
|
|
* event that the autorefresh command is delayed due to other SDRC activity.
|
|
* The '| 1' sets the ARE field to send one autorefresh when the autorefresh
|
|
* counter reaches 0.
|
|
*
|
|
* These represent optimal values for common parts, it won't work for all.
|
|
* As long as you scale down, most parameters are still work, they just
|
|
* become sub-optimal. The RFR value goes in the opposite direction. If you
|
|
* don't adjust it down as your clock period increases the refresh interval
|
|
* will not be met. Setting all parameters for complete worst case may work,
|
|
* but may cut memory performance by 2x. Due to errata the DLLs need to be
|
|
* unlocked and their value needs run time calibration. A dynamic call is
|
|
* need for that as no single right value exists acorss production samples.
|
|
*
|
|
* Only the FULL speed values are given. Current code is such that rate
|
|
* changes must be made at DPLLoutx2. The actual value adjustment for low
|
|
* frequency operation will be handled by omap_set_performance()
|
|
*
|
|
* By having the boot loader boot up in the fastest L4 speed available likely
|
|
* will result in something which you can switch between.
|
|
*/
|
|
#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
|
|
#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
|
|
#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
|
|
#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
|
|
#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
|
|
|
|
|
|
/*
|
|
* SMS register access
|
|
*/
|
|
|
|
#define OMAP242X_SMS_REGADDR(reg) \
|
|
(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
|
|
#define OMAP243X_SMS_REGADDR(reg) \
|
|
(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
|
|
#define OMAP343X_SMS_REGADDR(reg) \
|
|
(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
|
|
|
|
/* SMS register offsets - read/write with sms_{read,write}_reg() */
|
|
|
|
#define SMS_SYSCONFIG 0x010
|
|
/* REVISIT: fill in other SMS registers here */
|
|
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
/**
|
|
* struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
|
|
* @rate: SDRC clock rate (in Hz)
|
|
* @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
|
|
* @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
|
|
* @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
|
|
* @mr: Value to program to SDRC_MR for this rate
|
|
*
|
|
* This structure holds a pre-computed set of register values for the
|
|
* SDRC for a given SDRC clock rate and SDRAM chip. These are
|
|
* intended to be pre-computed and specified in an array in the board-*.c
|
|
* files. The structure is keyed off the 'rate' field.
|
|
*/
|
|
struct omap_sdrc_params {
|
|
unsigned long rate;
|
|
u32 actim_ctrla;
|
|
u32 actim_ctrlb;
|
|
u32 rfr_ctrl;
|
|
u32 mr;
|
|
};
|
|
|
|
void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
|
|
struct omap_sdrc_params *sdrc_cs1);
|
|
int omap2_sdrc_get_params(unsigned long r,
|
|
struct omap_sdrc_params **sdrc_cs0,
|
|
struct omap_sdrc_params **sdrc_cs1);
|
|
|
|
#ifdef CONFIG_ARCH_OMAP2
|
|
|
|
struct memory_timings {
|
|
u32 m_type; /* ddr = 1, sdr = 0 */
|
|
u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
|
|
u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
|
|
u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
|
|
u32 base_cs; /* base chip select to use for calculations */
|
|
};
|
|
|
|
extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
|
|
|
|
u32 omap2xxx_sdrc_dll_is_unlocked(void);
|
|
u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
|
|
|
|
#endif /* CONFIG_ARCH_OMAP2 */
|
|
|
|
#endif /* __ASSEMBLER__ */
|
|
|
|
#endif
|