android_kernel_xiaomi_sm8350/arch/ia64/sn/kernel/msi_sn.c
Michael Ellerman 7fe3730de7 MSI: arch must connect the irq and the msi_desc
set_irq_msi() currently connects an irq_desc to an msi_desc. The archs call
it at some point in their setup routine, and then the generic code sets up the
reverse mapping from the msi_desc back to the irq.

set_irq_msi() should do both connections, making it the one and only call
required to connect an irq with it's MSI desc and vice versa.

The arch code MUST call set_irq_msi(), and it must do so only once it's sure
it's not going to fail the irq allocation.

Given that there's no need for the arch to return the irq anymore, the return
value from the arch setup routine just becomes 0 for success and anything else
for failure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:38 -07:00

235 lines
5.6 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/types.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/cpumask.h>
#include <linux/msi.h>
#include <asm/sn/addrs.h>
#include <asm/sn/intr.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/nodepda.h>
struct sn_msi_info {
u64 pci_addr;
struct sn_irq_info *sn_irq_info;
};
static struct sn_msi_info sn_msi_info[NR_IRQS];
static struct irq_chip sn_msi_chip;
void sn_teardown_msi_irq(unsigned int irq)
{
nasid_t nasid;
int widget;
struct pci_dev *pdev;
struct pcidev_info *sn_pdev;
struct sn_irq_info *sn_irq_info;
struct pcibus_bussoft *bussoft;
struct sn_pcibus_provider *provider;
sn_irq_info = sn_msi_info[irq].sn_irq_info;
if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
return;
sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
pdev = sn_pdev->pdi_linux_pcidev;
provider = SN_PCIDEV_BUSPROVIDER(pdev);
(*provider->dma_unmap)(pdev,
sn_msi_info[irq].pci_addr,
PCI_DMA_FROMDEVICE);
sn_msi_info[irq].pci_addr = 0;
bussoft = SN_PCIDEV_BUSSOFT(pdev);
nasid = NASID_GET(bussoft->bs_base);
widget = (nasid & 1) ?
TIO_SWIN_WIDGETNUM(bussoft->bs_base) :
SWIN_WIDGETNUM(bussoft->bs_base);
sn_intr_free(nasid, widget, sn_irq_info);
sn_msi_info[irq].sn_irq_info = NULL;
destroy_irq(irq);
}
int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry)
{
struct msi_msg msg;
int widget;
int status;
nasid_t nasid;
u64 bus_addr;
struct sn_irq_info *sn_irq_info;
struct pcibus_bussoft *bussoft = SN_PCIDEV_BUSSOFT(pdev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
int irq;
if (!entry->msi_attrib.is_64)
return -EINVAL;
if (bussoft == NULL)
return -EINVAL;
if (provider == NULL || provider->dma_map_consistent == NULL)
return -EINVAL;
irq = create_irq();
if (irq < 0)
return irq;
/*
* Set up the vector plumbing. Let the prom (via sn_intr_alloc)
* decide which cpu to direct this msi at by default.
*/
nasid = NASID_GET(bussoft->bs_base);
widget = (nasid & 1) ?
TIO_SWIN_WIDGETNUM(bussoft->bs_base) :
SWIN_WIDGETNUM(bussoft->bs_base);
sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
if (! sn_irq_info) {
destroy_irq(irq);
return -ENOMEM;
}
status = sn_intr_alloc(nasid, widget, sn_irq_info, irq, -1, -1);
if (status) {
kfree(sn_irq_info);
destroy_irq(irq);
return -ENOMEM;
}
sn_irq_info->irq_int_bit = -1; /* mark this as an MSI irq */
sn_irq_fixup(pdev, sn_irq_info);
/* Prom probably should fill these in, but doesn't ... */
sn_irq_info->irq_bridge_type = bussoft->bs_asic_type;
sn_irq_info->irq_bridge = (void *)bussoft->bs_base;
/*
* Map the xio address into bus space
*/
bus_addr = (*provider->dma_map_consistent)(pdev,
sn_irq_info->irq_xtalkaddr,
sizeof(sn_irq_info->irq_xtalkaddr),
SN_DMA_MSI|SN_DMA_ADDR_XIO);
if (! bus_addr) {
sn_intr_free(nasid, widget, sn_irq_info);
kfree(sn_irq_info);
destroy_irq(irq);
return -ENOMEM;
}
sn_msi_info[irq].sn_irq_info = sn_irq_info;
sn_msi_info[irq].pci_addr = bus_addr;
msg.address_hi = (u32)(bus_addr >> 32);
msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff);
/*
* In the SN platform, bit 16 is a "send vector" bit which
* must be present in order to move the vector through the system.
*/
msg.data = 0x100 + irq;
set_irq_msi(irq, entry);
write_msi_msg(irq, &msg);
set_irq_chip_and_handler(irq, &sn_msi_chip, handle_edge_irq);
return 0;
}
#ifdef CONFIG_SMP
static void sn_set_msi_irq_affinity(unsigned int irq, cpumask_t cpu_mask)
{
struct msi_msg msg;
int slice;
nasid_t nasid;
u64 bus_addr;
struct pci_dev *pdev;
struct pcidev_info *sn_pdev;
struct sn_irq_info *sn_irq_info;
struct sn_irq_info *new_irq_info;
struct sn_pcibus_provider *provider;
unsigned int cpu;
cpu = first_cpu(cpu_mask);
sn_irq_info = sn_msi_info[irq].sn_irq_info;
if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
return;
/*
* Release XIO resources for the old MSI PCI address
*/
read_msi_msg(irq, &msg);
sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
pdev = sn_pdev->pdi_linux_pcidev;
provider = SN_PCIDEV_BUSPROVIDER(pdev);
bus_addr = (u64)(msg.address_hi) << 32 | (u64)(msg.address_lo);
(*provider->dma_unmap)(pdev, bus_addr, PCI_DMA_FROMDEVICE);
sn_msi_info[irq].pci_addr = 0;
nasid = cpuid_to_nasid(cpu);
slice = cpuid_to_slice(cpu);
new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
sn_msi_info[irq].sn_irq_info = new_irq_info;
if (new_irq_info == NULL)
return;
/*
* Map the xio address into bus space
*/
bus_addr = (*provider->dma_map_consistent)(pdev,
new_irq_info->irq_xtalkaddr,
sizeof(new_irq_info->irq_xtalkaddr),
SN_DMA_MSI|SN_DMA_ADDR_XIO);
sn_msi_info[irq].pci_addr = bus_addr;
msg.address_hi = (u32)(bus_addr >> 32);
msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff);
write_msi_msg(irq, &msg);
irq_desc[irq].affinity = cpu_mask;
}
#endif /* CONFIG_SMP */
static void sn_ack_msi_irq(unsigned int irq)
{
move_native_irq(irq);
ia64_eoi();
}
static int sn_msi_retrigger_irq(unsigned int irq)
{
unsigned int vector = irq;
ia64_resend_irq(vector);
return 1;
}
static struct irq_chip sn_msi_chip = {
.name = "PCI-MSI",
.mask = mask_msi_irq,
.unmask = unmask_msi_irq,
.ack = sn_ack_msi_irq,
#ifdef CONFIG_SMP
.set_affinity = sn_set_msi_irq_affinity,
#endif
.retrigger = sn_msi_retrigger_irq,
};