android_kernel_xiaomi_sm8350/drivers/char/moxa.c
Jiri Slaby 74d7d97b9e Char: moxa, ioctl cleanup
- allow stats only for sys_admin
- move TCSBRK* processing to .break_ctl tty op
- let TIOCGSOFTCAR and TIOCSSOFTCAR be processed by ldisc
- remove MOXA_GET_MAJOR, MOXA_GET_CUMAJOR
- fix jiffies subtraction by time_after
- move moxa ioctl numbers into the header; still not exported to userspace,
  needs _IOC and 32/64 compat cleanup anyways

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:42 -07:00

2443 lines
61 KiB
C

/*****************************************************************************/
/*
* moxa.c -- MOXA Intellio family multiport serial driver.
*
* Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com.tw).
*
* This code is loosely based on the Linux serial driver, written by
* Linus Torvalds, Theodore T'so and others.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/*
* MOXA Intellio Series Driver
* for : LINUX
* date : 1999/1/7
* version : 5.1
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/firmware.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/serial.h>
#include <linux/tty_driver.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/completion.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include "moxa.h"
#define MOXA_VERSION "5.1k"
#define MOXA_FW_HDRLEN 32
#define MOXAMAJOR 172
#define MOXACUMAJOR 173
#define MAX_BOARDS 4 /* Don't change this value */
#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
/*
* Define the Moxa PCI vendor and device IDs.
*/
#define MOXA_BUS_TYPE_ISA 0
#define MOXA_BUS_TYPE_PCI 1
enum {
MOXA_BOARD_C218_PCI = 1,
MOXA_BOARD_C218_ISA,
MOXA_BOARD_C320_PCI,
MOXA_BOARD_C320_ISA,
MOXA_BOARD_CP204J,
};
static char *moxa_brdname[] =
{
"C218 Turbo PCI series",
"C218 Turbo ISA series",
"C320 Turbo PCI series",
"C320 Turbo ISA series",
"CP-204J series",
};
#ifdef CONFIG_PCI
static struct pci_device_id moxa_pcibrds[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
.driver_data = MOXA_BOARD_C218_PCI },
{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
.driver_data = MOXA_BOARD_C320_PCI },
{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
.driver_data = MOXA_BOARD_CP204J },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
#endif /* CONFIG_PCI */
struct moxa_port;
static struct moxa_board_conf {
int boardType;
int numPorts;
int busType;
unsigned int ready;
struct moxa_port *ports;
void __iomem *basemem;
void __iomem *intNdx;
void __iomem *intPend;
void __iomem *intTable;
} moxa_boards[MAX_BOARDS];
struct mxser_mstatus {
tcflag_t cflag;
int cts;
int dsr;
int ri;
int dcd;
};
struct moxaq_str {
int inq;
int outq;
};
struct moxa_port {
struct moxa_board_conf *board;
int type;
int close_delay;
int count;
int blocked_open;
int asyncflags;
unsigned long statusflags;
struct tty_struct *tty;
int cflag;
wait_queue_head_t open_wait;
struct completion close_wait;
struct timer_list emptyTimer;
char lineCtrl;
void __iomem *tableAddr;
char DCDState;
char lowChkFlag;
ushort breakCnt;
};
struct mon_str {
int tick;
int rxcnt[MAX_PORTS];
int txcnt[MAX_PORTS];
};
/* statusflags */
#define TXSTOPPED 0x1
#define LOWWAIT 0x2
#define EMPTYWAIT 0x4
#define THROTTLE 0x8
#define SERIAL_DO_RESTART
#define WAKEUP_CHARS 256
static int ttymajor = MOXAMAJOR;
static struct mon_str moxaLog;
static unsigned int moxaFuncTout = HZ / 2;
/* Variables for insmod */
#ifdef MODULE
static unsigned long baseaddr[MAX_BOARDS];
static unsigned int type[MAX_BOARDS];
static unsigned int numports[MAX_BOARDS];
#endif
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
MODULE_LICENSE("GPL");
#ifdef MODULE
module_param_array(type, uint, NULL, 0);
MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
module_param_array(baseaddr, ulong, NULL, 0);
MODULE_PARM_DESC(baseaddr, "base address");
module_param_array(numports, uint, NULL, 0);
MODULE_PARM_DESC(numports, "numports (ignored for C218)");
#endif
module_param(ttymajor, int, 0);
/*
* static functions:
*/
static int moxa_open(struct tty_struct *, struct file *);
static void moxa_close(struct tty_struct *, struct file *);
static int moxa_write(struct tty_struct *, const unsigned char *, int);
static int moxa_write_room(struct tty_struct *);
static void moxa_flush_buffer(struct tty_struct *);
static int moxa_chars_in_buffer(struct tty_struct *);
static void moxa_flush_chars(struct tty_struct *);
static void moxa_put_char(struct tty_struct *, unsigned char);
static void moxa_throttle(struct tty_struct *);
static void moxa_unthrottle(struct tty_struct *);
static void moxa_set_termios(struct tty_struct *, struct ktermios *);
static void moxa_stop(struct tty_struct *);
static void moxa_start(struct tty_struct *);
static void moxa_hangup(struct tty_struct *);
static int moxa_tiocmget(struct tty_struct *tty, struct file *file);
static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static void moxa_poll(unsigned long);
static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
static int moxa_block_till_ready(struct tty_struct *, struct file *,
struct moxa_port *);
static void moxa_setup_empty_event(struct tty_struct *);
static void moxa_check_xmit_empty(unsigned long);
static void moxa_shut_down(struct moxa_port *);
static void moxa_receive_data(struct moxa_port *);
/*
* moxa board interface functions:
*/
static int MoxaDriverPoll(void);
static void MoxaPortEnable(struct moxa_port *);
static void MoxaPortDisable(struct moxa_port *);
static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
static void MoxaPortLineCtrl(struct moxa_port *, int, int);
static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
static int MoxaPortLineStatus(struct moxa_port *);
static int MoxaPortDCDChange(struct moxa_port *);
static int MoxaPortDCDON(struct moxa_port *);
static void MoxaPortFlushData(struct moxa_port *, int);
static int MoxaPortWriteData(struct moxa_port *, unsigned char *, int);
static int MoxaPortReadData(struct moxa_port *, struct tty_struct *tty);
static int MoxaPortTxQueue(struct moxa_port *);
static int MoxaPortRxQueue(struct moxa_port *);
static int MoxaPortTxFree(struct moxa_port *);
static void MoxaPortTxDisable(struct moxa_port *);
static void MoxaPortTxEnable(struct moxa_port *);
static int MoxaPortResetBrkCnt(struct moxa_port *);
static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
static void MoxaSetFifo(struct moxa_port *port, int enable);
/*
* I/O functions
*/
static void moxa_wait_finish(void __iomem *ofsAddr)
{
unsigned long end = jiffies + moxaFuncTout;
while (readw(ofsAddr + FuncCode) != 0)
if (time_after(jiffies, end))
return;
if (readw(ofsAddr + FuncCode) != 0 && printk_ratelimit())
printk(KERN_WARNING "moxa function expired\n");
}
static void moxafunc(void __iomem *ofsAddr, int cmd, ushort arg)
{
writew(arg, ofsAddr + FuncArg);
writew(cmd, ofsAddr + FuncCode);
moxa_wait_finish(ofsAddr);
}
/*
* TTY operations
*/
static int moxa_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct moxa_port *ch = tty->driver_data;
void __user *argp = (void __user *)arg;
int status;
if (tty->index == MAX_PORTS) {
if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
cmd != MOXA_GETMSTATUS)
return -EINVAL;
} else if (!ch)
return -ENODEV;
switch (cmd) {
case MOXA_GETDATACOUNT:
moxaLog.tick = jiffies;
return copy_to_user(argp, &moxaLog, sizeof(moxaLog)) ?
-EFAULT : 0;
case MOXA_FLUSH_QUEUE:
MoxaPortFlushData(ch, arg);
return 0;
case MOXA_GET_IOQUEUE: {
struct moxaq_str __user *argm = argp;
struct moxaq_str tmp;
struct moxa_port *p;
unsigned int i, j;
for (i = 0; i < MAX_BOARDS; i++) {
p = moxa_boards[i].ports;
for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
memset(&tmp, 0, sizeof(tmp));
if (moxa_boards[i].ready) {
tmp.inq = MoxaPortRxQueue(p);
tmp.outq = MoxaPortTxQueue(p);
}
if (copy_to_user(argm, &tmp, sizeof(tmp)))
return -EFAULT;
}
}
return 0;
} case MOXA_GET_OQUEUE:
status = MoxaPortTxQueue(ch);
return put_user(status, (unsigned long __user *)argp);
case MOXA_GET_IQUEUE:
status = MoxaPortRxQueue(ch);
return put_user(status, (unsigned long __user *)argp);
case MOXA_GETMSTATUS: {
struct mxser_mstatus __user *argm = argp;
struct mxser_mstatus tmp;
struct moxa_port *p;
unsigned int i, j;
for (i = 0; i < MAX_BOARDS; i++) {
p = moxa_boards[i].ports;
for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
memset(&tmp, 0, sizeof(tmp));
if (!moxa_boards[i].ready)
goto copy;
status = MoxaPortLineStatus(p);
if (status & 1)
tmp.cts = 1;
if (status & 2)
tmp.dsr = 1;
if (status & 4)
tmp.dcd = 1;
if (!p->tty || !p->tty->termios)
tmp.cflag = p->cflag;
else
tmp.cflag = p->tty->termios->c_cflag;
copy:
if (copy_to_user(argm, &tmp, sizeof(tmp)))
return -EFAULT;
}
}
return 0;
}
case TIOCGSERIAL:
return moxa_get_serial_info(ch, argp);
case TIOCSSERIAL:
return moxa_set_serial_info(ch, argp);
}
return -ENOIOCTLCMD;
}
static void moxa_break_ctl(struct tty_struct *tty, int state)
{
struct moxa_port *port = tty->driver_data;
moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
Magic_code);
}
static const struct tty_operations moxa_ops = {
.open = moxa_open,
.close = moxa_close,
.write = moxa_write,
.write_room = moxa_write_room,
.flush_buffer = moxa_flush_buffer,
.chars_in_buffer = moxa_chars_in_buffer,
.flush_chars = moxa_flush_chars,
.put_char = moxa_put_char,
.ioctl = moxa_ioctl,
.throttle = moxa_throttle,
.unthrottle = moxa_unthrottle,
.set_termios = moxa_set_termios,
.stop = moxa_stop,
.start = moxa_start,
.hangup = moxa_hangup,
.break_ctl = moxa_break_ctl,
.tiocmget = moxa_tiocmget,
.tiocmset = moxa_tiocmset,
};
static struct tty_driver *moxaDriver;
static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
static DEFINE_SPINLOCK(moxa_lock);
/*
* HW init
*/
static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
{
switch (brd->boardType) {
case MOXA_BOARD_C218_ISA:
case MOXA_BOARD_C218_PCI:
if (model != 1)
goto err;
break;
case MOXA_BOARD_CP204J:
if (model != 3)
goto err;
break;
default:
if (model != 2)
goto err;
break;
}
return 0;
err:
return -EINVAL;
}
static int moxa_check_fw(const void *ptr)
{
const __le16 *lptr = ptr;
if (*lptr != cpu_to_le16(0x7980))
return -EINVAL;
return 0;
}
static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
size_t len)
{
void __iomem *baseAddr = brd->basemem;
u16 tmp;
writeb(HW_reset, baseAddr + Control_reg); /* reset */
msleep(10);
memset_io(baseAddr, 0, 4096);
memcpy_toio(baseAddr, buf, len); /* download BIOS */
writeb(0, baseAddr + Control_reg); /* restart */
msleep(2000);
switch (brd->boardType) {
case MOXA_BOARD_C218_ISA:
case MOXA_BOARD_C218_PCI:
tmp = readw(baseAddr + C218_key);
if (tmp != C218_KeyCode)
goto err;
break;
case MOXA_BOARD_CP204J:
tmp = readw(baseAddr + C218_key);
if (tmp != CP204J_KeyCode)
goto err;
break;
default:
tmp = readw(baseAddr + C320_key);
if (tmp != C320_KeyCode)
goto err;
tmp = readw(baseAddr + C320_status);
if (tmp != STS_init) {
printk(KERN_ERR "moxa: bios upload failed -- CPU/Basic "
"module not found\n");
return -EIO;
}
break;
}
return 0;
err:
printk(KERN_ERR "moxa: bios upload failed -- board not found\n");
return -EIO;
}
static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
size_t len)
{
void __iomem *baseAddr = brd->basemem;
if (len < 7168) {
printk(KERN_ERR "moxa: invalid 320 bios -- too short\n");
return -EINVAL;
}
writew(len - 7168 - 2, baseAddr + C320bapi_len);
writeb(1, baseAddr + Control_reg); /* Select Page 1 */
memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
writeb(2, baseAddr + Control_reg); /* Select Page 2 */
memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
return 0;
}
static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
size_t len)
{
void __iomem *baseAddr = brd->basemem;
const u16 *uptr = ptr;
size_t wlen, len2, j;
unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
unsigned int i, retry, c320;
u16 usum, keycode;
c320 = brd->boardType == MOXA_BOARD_C320_PCI ||
brd->boardType == MOXA_BOARD_C320_ISA;
keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
C218_KeyCode;
switch (brd->boardType) {
case MOXA_BOARD_CP204J:
case MOXA_BOARD_C218_ISA:
case MOXA_BOARD_C218_PCI:
key = C218_key;
loadbuf = C218_LoadBuf;
loadlen = C218DLoad_len;
checksum = C218check_sum;
checksum_ok = C218chksum_ok;
break;
default:
key = C320_key;
keycode = C320_KeyCode;
loadbuf = C320_LoadBuf;
loadlen = C320DLoad_len;
checksum = C320check_sum;
checksum_ok = C320chksum_ok;
break;
}
usum = 0;
wlen = len >> 1;
for (i = 0; i < wlen; i++)
usum += le16_to_cpu(uptr[i]);
retry = 0;
do {
wlen = len >> 1;
j = 0;
while (wlen) {
len2 = (wlen > 2048) ? 2048 : wlen;
wlen -= len2;
memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
j += len2 << 1;
writew(len2, baseAddr + loadlen);
writew(0, baseAddr + key);
for (i = 0; i < 100; i++) {
if (readw(baseAddr + key) == keycode)
break;
msleep(10);
}
if (readw(baseAddr + key) != keycode)
return -EIO;
}
writew(0, baseAddr + loadlen);
writew(usum, baseAddr + checksum);
writew(0, baseAddr + key);
for (i = 0; i < 100; i++) {
if (readw(baseAddr + key) == keycode)
break;
msleep(10);
}
retry++;
} while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
if (readb(baseAddr + checksum_ok) != 1)
return -EIO;
writew(0, baseAddr + key);
for (i = 0; i < 600; i++) {
if (readw(baseAddr + Magic_no) == Magic_code)
break;
msleep(10);
}
if (readw(baseAddr + Magic_no) != Magic_code)
return -EIO;
if (c320) {
if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
writew(0x3800, baseAddr + TMS320_PORT1);
writew(0x3900, baseAddr + TMS320_PORT2);
writew(28499, baseAddr + TMS320_CLOCK);
} else {
writew(0x3200, baseAddr + TMS320_PORT1);
writew(0x3400, baseAddr + TMS320_PORT2);
writew(19999, baseAddr + TMS320_CLOCK);
}
}
writew(1, baseAddr + Disable_IRQ);
writew(0, baseAddr + Magic_no);
for (i = 0; i < 500; i++) {
if (readw(baseAddr + Magic_no) == Magic_code)
break;
msleep(10);
}
if (readw(baseAddr + Magic_no) != Magic_code)
return -EIO;
if (c320) {
j = readw(baseAddr + Module_cnt);
if (j <= 0)
return -EIO;
brd->numPorts = j * 8;
writew(j, baseAddr + Module_no);
writew(0, baseAddr + Magic_no);
for (i = 0; i < 600; i++) {
if (readw(baseAddr + Magic_no) == Magic_code)
break;
msleep(10);
}
if (readw(baseAddr + Magic_no) != Magic_code)
return -EIO;
}
brd->intNdx = baseAddr + IRQindex;
brd->intPend = baseAddr + IRQpending;
brd->intTable = baseAddr + IRQtable;
return 0;
}
static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
size_t len)
{
void __iomem *ofsAddr, *baseAddr = brd->basemem;
struct moxa_port *port;
int retval, i;
if (len % 2) {
printk(KERN_ERR "moxa: bios length is not even\n");
return -EINVAL;
}
retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
if (retval)
return retval;
switch (brd->boardType) {
case MOXA_BOARD_C218_ISA:
case MOXA_BOARD_C218_PCI:
case MOXA_BOARD_CP204J:
port = brd->ports;
for (i = 0; i < brd->numPorts; i++, port++) {
port->board = brd;
port->DCDState = 0;
port->tableAddr = baseAddr + Extern_table +
Extern_size * i;
ofsAddr = port->tableAddr;
writew(C218rx_mask, ofsAddr + RX_mask);
writew(C218tx_mask, ofsAddr + TX_mask);
writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
}
break;
default:
port = brd->ports;
for (i = 0; i < brd->numPorts; i++, port++) {
port->board = brd;
port->DCDState = 0;
port->tableAddr = baseAddr + Extern_table +
Extern_size * i;
ofsAddr = port->tableAddr;
switch (brd->numPorts) {
case 8:
writew(C320p8rx_mask, ofsAddr + RX_mask);
writew(C320p8tx_mask, ofsAddr + TX_mask);
writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
break;
case 16:
writew(C320p16rx_mask, ofsAddr + RX_mask);
writew(C320p16tx_mask, ofsAddr + TX_mask);
writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
break;
case 24:
writew(C320p24rx_mask, ofsAddr + RX_mask);
writew(C320p24tx_mask, ofsAddr + TX_mask);
writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
break;
case 32:
writew(C320p32rx_mask, ofsAddr + RX_mask);
writew(C320p32tx_mask, ofsAddr + TX_mask);
writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
break;
}
}
break;
}
return 0;
}
static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
{
void *ptr = fw->data;
char rsn[64];
u16 lens[5];
size_t len;
unsigned int a, lenp, lencnt;
int ret = -EINVAL;
struct {
__le32 magic; /* 0x34303430 */
u8 reserved1[2];
u8 type; /* UNIX = 3 */
u8 model; /* C218T=1, C320T=2, CP204=3 */
u8 reserved2[8];
__le16 len[5];
} *hdr = ptr;
BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
if (fw->size < MOXA_FW_HDRLEN) {
strcpy(rsn, "too short (even header won't fit)");
goto err;
}
if (hdr->magic != cpu_to_le32(0x30343034)) {
sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
goto err;
}
if (hdr->type != 3) {
sprintf(rsn, "not for linux, type is %u", hdr->type);
goto err;
}
if (moxa_check_fw_model(brd, hdr->model)) {
sprintf(rsn, "not for this card, model is %u", hdr->model);
goto err;
}
len = MOXA_FW_HDRLEN;
lencnt = hdr->model == 2 ? 5 : 3;
for (a = 0; a < ARRAY_SIZE(lens); a++) {
lens[a] = le16_to_cpu(hdr->len[a]);
if (lens[a] && len + lens[a] <= fw->size &&
moxa_check_fw(&fw->data[len]))
printk(KERN_WARNING "moxa firmware: unexpected input "
"at offset %u, but going on\n", (u32)len);
if (!lens[a] && a < lencnt) {
sprintf(rsn, "too few entries in fw file");
goto err;
}
len += lens[a];
}
if (len != fw->size) {
sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
(u32)len);
goto err;
}
ptr += MOXA_FW_HDRLEN;
lenp = 0; /* bios */
strcpy(rsn, "read above");
ret = moxa_load_bios(brd, ptr, lens[lenp]);
if (ret)
goto err;
/* we skip the tty section (lens[1]), since we don't need it */
ptr += lens[lenp] + lens[lenp + 1];
lenp += 2; /* comm */
if (hdr->model == 2) {
ret = moxa_load_320b(brd, ptr, lens[lenp]);
if (ret)
goto err;
/* skip another tty */
ptr += lens[lenp] + lens[lenp + 1];
lenp += 2;
}
ret = moxa_load_code(brd, ptr, lens[lenp]);
if (ret)
goto err;
return 0;
err:
printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
return ret;
}
static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
{
const struct firmware *fw;
const char *file;
struct moxa_port *p;
unsigned int i;
int ret;
brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
GFP_KERNEL);
if (brd->ports == NULL) {
printk(KERN_ERR "cannot allocate memory for ports\n");
ret = -ENOMEM;
goto err;
}
for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
p->type = PORT_16550A;
p->close_delay = 5 * HZ / 10;
p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
init_waitqueue_head(&p->open_wait);
init_completion(&p->close_wait);
setup_timer(&p->emptyTimer, moxa_check_xmit_empty,
(unsigned long)p);
}
switch (brd->boardType) {
case MOXA_BOARD_C218_ISA:
case MOXA_BOARD_C218_PCI:
file = "c218tunx.cod";
break;
case MOXA_BOARD_CP204J:
file = "cp204unx.cod";
break;
default:
file = "c320tunx.cod";
break;
}
ret = request_firmware(&fw, file, dev);
if (ret) {
printk(KERN_ERR "request_firmware failed\n");
goto err_free;
}
ret = moxa_load_fw(brd, fw);
release_firmware(fw);
if (ret)
goto err_free;
brd->ready = 1;
if (!timer_pending(&moxaTimer))
mod_timer(&moxaTimer, jiffies + HZ / 50);
return 0;
err_free:
kfree(brd->ports);
err:
return ret;
}
static void moxa_board_deinit(struct moxa_board_conf *brd)
{
unsigned int i;
brd->ready = 0;
for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
del_timer_sync(&brd->ports[i].emptyTimer);
iounmap(brd->basemem);
brd->basemem = NULL;
kfree(brd->ports);
}
#ifdef CONFIG_PCI
static int __devinit moxa_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct moxa_board_conf *board;
unsigned int i;
int board_type = ent->driver_data;
int retval;
retval = pci_enable_device(pdev);
if (retval) {
dev_err(&pdev->dev, "can't enable pci device\n");
goto err;
}
for (i = 0; i < MAX_BOARDS; i++)
if (moxa_boards[i].basemem == NULL)
break;
retval = -ENODEV;
if (i >= MAX_BOARDS) {
dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
"found. Board is ignored.\n", MAX_BOARDS);
goto err;
}
board = &moxa_boards[i];
retval = pci_request_region(pdev, 2, "moxa-base");
if (retval) {
dev_err(&pdev->dev, "can't request pci region 2\n");
goto err;
}
board->basemem = ioremap(pci_resource_start(pdev, 2), 0x4000);
if (board->basemem == NULL) {
dev_err(&pdev->dev, "can't remap io space 2\n");
goto err_reg;
}
board->boardType = board_type;
switch (board_type) {
case MOXA_BOARD_C218_ISA:
case MOXA_BOARD_C218_PCI:
board->numPorts = 8;
break;
case MOXA_BOARD_CP204J:
board->numPorts = 4;
break;
default:
board->numPorts = 0;
break;
}
board->busType = MOXA_BUS_TYPE_PCI;
retval = moxa_init_board(board, &pdev->dev);
if (retval)
goto err_base;
pci_set_drvdata(pdev, board);
return (0);
err_base:
iounmap(board->basemem);
board->basemem = NULL;
err_reg:
pci_release_region(pdev, 2);
err:
return retval;
}
static void __devexit moxa_pci_remove(struct pci_dev *pdev)
{
struct moxa_board_conf *brd = pci_get_drvdata(pdev);
moxa_board_deinit(brd);
pci_release_region(pdev, 2);
}
static struct pci_driver moxa_pci_driver = {
.name = "moxa",
.id_table = moxa_pcibrds,
.probe = moxa_pci_probe,
.remove = __devexit_p(moxa_pci_remove)
};
#endif /* CONFIG_PCI */
static int __init moxa_init(void)
{
unsigned int isabrds = 0;
int retval = 0;
printk(KERN_INFO "MOXA Intellio family driver version %s\n",
MOXA_VERSION);
moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
if (!moxaDriver)
return -ENOMEM;
moxaDriver->owner = THIS_MODULE;
moxaDriver->name = "ttyMX";
moxaDriver->major = ttymajor;
moxaDriver->minor_start = 0;
moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
moxaDriver->subtype = SERIAL_TYPE_NORMAL;
moxaDriver->init_termios = tty_std_termios;
moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
moxaDriver->init_termios.c_ispeed = 9600;
moxaDriver->init_termios.c_ospeed = 9600;
moxaDriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(moxaDriver, &moxa_ops);
pr_debug("Moxa tty devices major number = %d\n", ttymajor);
if (tty_register_driver(moxaDriver)) {
printk(KERN_ERR "Couldn't install MOXA Smartio family driver !\n");
put_tty_driver(moxaDriver);
return -1;
}
/* Find the boards defined from module args. */
#ifdef MODULE
{
struct moxa_board_conf *brd = moxa_boards;
unsigned int i;
for (i = 0; i < MAX_BOARDS; i++) {
if (!baseaddr[i])
break;
if (type[i] == MOXA_BOARD_C218_ISA ||
type[i] == MOXA_BOARD_C320_ISA) {
pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
isabrds + 1, moxa_brdname[type[i] - 1],
baseaddr[i]);
brd->boardType = type[i];
brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
numports[i];
brd->busType = MOXA_BUS_TYPE_ISA;
brd->basemem = ioremap(baseaddr[i], 0x4000);
if (!brd->basemem) {
printk(KERN_ERR "moxa: can't remap %lx\n",
baseaddr[i]);
continue;
}
if (moxa_init_board(brd, NULL)) {
iounmap(brd->basemem);
brd->basemem = NULL;
continue;
}
brd++;
isabrds++;
}
}
}
#endif
#ifdef CONFIG_PCI
retval = pci_register_driver(&moxa_pci_driver);
if (retval) {
printk(KERN_ERR "Can't register moxa pci driver!\n");
if (isabrds)
retval = 0;
}
#endif
return retval;
}
static void __exit moxa_exit(void)
{
int i;
del_timer_sync(&moxaTimer);
if (tty_unregister_driver(moxaDriver))
printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
"serial driver\n");
put_tty_driver(moxaDriver);
#ifdef CONFIG_PCI
pci_unregister_driver(&moxa_pci_driver);
#endif
for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
if (moxa_boards[i].ready)
moxa_board_deinit(&moxa_boards[i]);
}
module_init(moxa_init);
module_exit(moxa_exit);
static int moxa_open(struct tty_struct *tty, struct file *filp)
{
struct moxa_board_conf *brd;
struct moxa_port *ch;
int port;
int retval;
port = tty->index;
if (port == MAX_PORTS) {
return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
}
brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
if (!brd->ready)
return -ENODEV;
ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
ch->count++;
tty->driver_data = ch;
ch->tty = tty;
if (!(ch->asyncflags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
moxa_set_tty_param(tty, tty->termios);
MoxaPortLineCtrl(ch, 1, 1);
MoxaPortEnable(ch);
ch->asyncflags |= ASYNC_INITIALIZED;
}
retval = moxa_block_till_ready(tty, filp, ch);
moxa_unthrottle(tty);
if (ch->type == PORT_16550A) {
MoxaSetFifo(ch, 1);
} else {
MoxaSetFifo(ch, 0);
}
return (retval);
}
static void moxa_close(struct tty_struct *tty, struct file *filp)
{
struct moxa_port *ch;
int port;
port = tty->index;
if (port == MAX_PORTS) {
return;
}
if (tty->driver_data == NULL) {
return;
}
if (tty_hung_up_p(filp)) {
return;
}
ch = (struct moxa_port *) tty->driver_data;
if ((tty->count == 1) && (ch->count != 1)) {
printk(KERN_WARNING "moxa_close: bad serial port count; "
"tty->count is 1, ch->count is %d\n", ch->count);
ch->count = 1;
}
if (--ch->count < 0) {
printk(KERN_WARNING "moxa_close: bad serial port count, "
"device=%s\n", tty->name);
ch->count = 0;
}
if (ch->count) {
return;
}
ch->asyncflags |= ASYNC_CLOSING;
ch->cflag = tty->termios->c_cflag;
if (ch->asyncflags & ASYNC_INITIALIZED) {
moxa_setup_empty_event(tty);
tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */
del_timer_sync(&ch->emptyTimer);
}
moxa_shut_down(ch);
MoxaPortFlushData(ch, 2);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
ch->tty = NULL;
if (ch->blocked_open) {
if (ch->close_delay) {
msleep_interruptible(jiffies_to_msecs(ch->close_delay));
}
wake_up_interruptible(&ch->open_wait);
}
ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
complete_all(&ch->close_wait);
}
static int moxa_write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
struct moxa_port *ch = tty->driver_data;
unsigned long flags;
int len;
if (ch == NULL)
return 0;
spin_lock_irqsave(&moxa_lock, flags);
len = MoxaPortWriteData(ch, (unsigned char *) buf, count);
spin_unlock_irqrestore(&moxa_lock, flags);
/*********************************************
if ( !(ch->statusflags & LOWWAIT) &&
((len != count) || (MoxaPortTxFree(port) <= 100)) )
************************************************/
ch->statusflags |= LOWWAIT;
return (len);
}
static int moxa_write_room(struct tty_struct *tty)
{
struct moxa_port *ch;
if (tty->stopped)
return (0);
ch = tty->driver_data;
if (ch == NULL)
return (0);
return MoxaPortTxFree(ch);
}
static void moxa_flush_buffer(struct tty_struct *tty)
{
struct moxa_port *ch = tty->driver_data;
if (ch == NULL)
return;
MoxaPortFlushData(ch, 1);
tty_wakeup(tty);
}
static int moxa_chars_in_buffer(struct tty_struct *tty)
{
struct moxa_port *ch = tty->driver_data;
int chars;
/*
* Sigh...I have to check if driver_data is NULL here, because
* if an open() fails, the TTY subsystem eventually calls
* tty_wait_until_sent(), which calls the driver's chars_in_buffer()
* routine. And since the open() failed, we return 0 here. TDJ
*/
if (ch == NULL)
return (0);
chars = MoxaPortTxQueue(ch);
if (chars) {
/*
* Make it possible to wakeup anything waiting for output
* in tty_ioctl.c, etc.
*/
if (!(ch->statusflags & EMPTYWAIT))
moxa_setup_empty_event(tty);
}
return (chars);
}
static void moxa_flush_chars(struct tty_struct *tty)
{
/*
* Don't think I need this, because this is called to empty the TX
* buffer for the 16450, 16550, etc.
*/
}
static void moxa_put_char(struct tty_struct *tty, unsigned char c)
{
struct moxa_port *ch = tty->driver_data;
unsigned long flags;
if (ch == NULL)
return;
spin_lock_irqsave(&moxa_lock, flags);
MoxaPortWriteData(ch, &c, 1);
spin_unlock_irqrestore(&moxa_lock, flags);
/************************************************
if ( !(ch->statusflags & LOWWAIT) && (MoxaPortTxFree(port) <= 100) )
*************************************************/
ch->statusflags |= LOWWAIT;
}
static int moxa_tiocmget(struct tty_struct *tty, struct file *file)
{
struct moxa_port *ch = tty->driver_data;
int flag = 0, dtr, rts;
if (!ch)
return -EINVAL;
MoxaPortGetLineOut(ch, &dtr, &rts);
if (dtr)
flag |= TIOCM_DTR;
if (rts)
flag |= TIOCM_RTS;
dtr = MoxaPortLineStatus(ch);
if (dtr & 1)
flag |= TIOCM_CTS;
if (dtr & 2)
flag |= TIOCM_DSR;
if (dtr & 4)
flag |= TIOCM_CD;
return flag;
}
static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct moxa_port *ch = tty->driver_data;
int port;
int dtr, rts;
port = tty->index;
if (!ch)
return -EINVAL;
MoxaPortGetLineOut(ch, &dtr, &rts);
if (set & TIOCM_RTS)
rts = 1;
if (set & TIOCM_DTR)
dtr = 1;
if (clear & TIOCM_RTS)
rts = 0;
if (clear & TIOCM_DTR)
dtr = 0;
MoxaPortLineCtrl(ch, dtr, rts);
return 0;
}
static void moxa_throttle(struct tty_struct *tty)
{
struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
ch->statusflags |= THROTTLE;
}
static void moxa_unthrottle(struct tty_struct *tty)
{
struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
ch->statusflags &= ~THROTTLE;
}
static void moxa_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
if (ch == NULL)
return;
moxa_set_tty_param(tty, old_termios);
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
wake_up_interruptible(&ch->open_wait);
}
static void moxa_stop(struct tty_struct *tty)
{
struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
if (ch == NULL)
return;
MoxaPortTxDisable(ch);
ch->statusflags |= TXSTOPPED;
}
static void moxa_start(struct tty_struct *tty)
{
struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
if (ch == NULL)
return;
if (!(ch->statusflags & TXSTOPPED))
return;
MoxaPortTxEnable(ch);
ch->statusflags &= ~TXSTOPPED;
}
static void moxa_hangup(struct tty_struct *tty)
{
struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
moxa_flush_buffer(tty);
moxa_shut_down(ch);
ch->count = 0;
ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
ch->tty = NULL;
wake_up_interruptible(&ch->open_wait);
}
static void moxa_poll(unsigned long ignored)
{
struct moxa_port *ch;
struct tty_struct *tty;
unsigned int card;
int i;
del_timer(&moxaTimer);
if (MoxaDriverPoll() < 0) {
mod_timer(&moxaTimer, jiffies + HZ / 50);
return;
}
for (card = 0; card < MAX_BOARDS; card++) {
if (!moxa_boards[card].ready)
continue;
ch = moxa_boards[card].ports;
for (i = 0; i < moxa_boards[card].numPorts; i++, ch++) {
if ((ch->asyncflags & ASYNC_INITIALIZED) == 0)
continue;
if (!(ch->statusflags & THROTTLE) &&
(MoxaPortRxQueue(ch) > 0))
moxa_receive_data(ch);
tty = ch->tty;
if (tty == NULL)
continue;
if (ch->statusflags & LOWWAIT) {
if (MoxaPortTxQueue(ch) <= WAKEUP_CHARS) {
if (!tty->stopped) {
ch->statusflags &= ~LOWWAIT;
tty_wakeup(tty);
}
}
}
if (!I_IGNBRK(tty) && (MoxaPortResetBrkCnt(ch) > 0)) {
tty_insert_flip_char(tty, 0, TTY_BREAK);
tty_schedule_flip(tty);
}
if (MoxaPortDCDChange(ch)) {
if (ch->asyncflags & ASYNC_CHECK_CD) {
if (MoxaPortDCDON(ch))
wake_up_interruptible(&ch->open_wait);
else {
tty_hangup(tty);
wake_up_interruptible(&ch->open_wait);
ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
}
}
}
}
}
mod_timer(&moxaTimer, jiffies + HZ / 50);
}
/******************************************************************************/
static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
{
register struct ktermios *ts;
struct moxa_port *ch;
int rts, cts, txflow, rxflow, xany, baud;
ch = (struct moxa_port *) tty->driver_data;
ts = tty->termios;
if (ts->c_cflag & CLOCAL)
ch->asyncflags &= ~ASYNC_CHECK_CD;
else
ch->asyncflags |= ASYNC_CHECK_CD;
rts = cts = txflow = rxflow = xany = 0;
if (ts->c_cflag & CRTSCTS)
rts = cts = 1;
if (ts->c_iflag & IXON)
txflow = 1;
if (ts->c_iflag & IXOFF)
rxflow = 1;
if (ts->c_iflag & IXANY)
xany = 1;
/* Clear the features we don't support */
ts->c_cflag &= ~CMSPAR;
MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
if (baud == -1)
baud = tty_termios_baud_rate(old_termios);
/* Not put the baud rate into the termios data */
tty_encode_baud_rate(tty, baud, baud);
}
static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
struct moxa_port *ch)
{
DECLARE_WAITQUEUE(wait,current);
unsigned long flags;
int retval;
int do_clocal = C_CLOCAL(tty);
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp) || (ch->asyncflags & ASYNC_CLOSING)) {
if (ch->asyncflags & ASYNC_CLOSING)
wait_for_completion_interruptible(&ch->close_wait);
#ifdef SERIAL_DO_RESTART
if (ch->asyncflags & ASYNC_HUP_NOTIFY)
return (-EAGAIN);
else
return (-ERESTARTSYS);
#else
return (-EAGAIN);
#endif
}
/*
* If non-blocking mode is set, then make the check up front
* and then exit.
*/
if (filp->f_flags & O_NONBLOCK) {
ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
return (0);
}
/*
* Block waiting for the carrier detect and the line to become free
*/
retval = 0;
add_wait_queue(&ch->open_wait, &wait);
pr_debug("block_til_ready before block: ttys%d, count = %d\n",
tty->index, ch->count);
spin_lock_irqsave(&moxa_lock, flags);
if (!tty_hung_up_p(filp))
ch->count--;
ch->blocked_open++;
spin_unlock_irqrestore(&moxa_lock, flags);
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(ch->asyncflags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
if (ch->asyncflags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
#else
retval = -EAGAIN;
#endif
break;
}
if (!(ch->asyncflags & ASYNC_CLOSING) && (do_clocal ||
MoxaPortDCDON(ch)))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
schedule();
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&ch->open_wait, &wait);
spin_lock_irqsave(&moxa_lock, flags);
if (!tty_hung_up_p(filp))
ch->count++;
ch->blocked_open--;
spin_unlock_irqrestore(&moxa_lock, flags);
pr_debug("block_til_ready after blocking: ttys%d, count = %d\n",
tty->index, ch->count);
if (retval)
return (retval);
/* FIXME: review to see if we need to use set_bit on these */
ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
static void moxa_setup_empty_event(struct tty_struct *tty)
{
struct moxa_port *ch = tty->driver_data;
unsigned long flags;
spin_lock_irqsave(&moxa_lock, flags);
ch->statusflags |= EMPTYWAIT;
mod_timer(&ch->emptyTimer, jiffies + HZ);
spin_unlock_irqrestore(&moxa_lock, flags);
}
static void moxa_check_xmit_empty(unsigned long data)
{
struct moxa_port *ch;
ch = (struct moxa_port *) data;
if (ch->tty && (ch->statusflags & EMPTYWAIT)) {
if (MoxaPortTxQueue(ch) == 0) {
ch->statusflags &= ~EMPTYWAIT;
tty_wakeup(ch->tty);
return;
}
mod_timer(&ch->emptyTimer, round_jiffies(jiffies + HZ));
} else
ch->statusflags &= ~EMPTYWAIT;
}
static void moxa_shut_down(struct moxa_port *ch)
{
struct tty_struct *tp;
if (!(ch->asyncflags & ASYNC_INITIALIZED))
return;
tp = ch->tty;
MoxaPortDisable(ch);
/*
* If we're a modem control device and HUPCL is on, drop RTS & DTR.
*/
if (tp->termios->c_cflag & HUPCL)
MoxaPortLineCtrl(ch, 0, 0);
ch->asyncflags &= ~ASYNC_INITIALIZED;
}
static void moxa_receive_data(struct moxa_port *ch)
{
struct tty_struct *tp;
struct ktermios *ts;
unsigned long flags;
ts = NULL;
tp = ch->tty;
if (tp)
ts = tp->termios;
/**************************************************
if ( !tp || !ts || !(ts->c_cflag & CREAD) ) {
*****************************************************/
if (!tp || !ts) {
MoxaPortFlushData(ch, 0);
return;
}
spin_lock_irqsave(&moxa_lock, flags);
MoxaPortReadData(ch, tp);
spin_unlock_irqrestore(&moxa_lock, flags);
tty_schedule_flip(tp);
}
/*
* Query
*/
#define DCD_changed 0x01
#define DCD_oldstate 0x80
static int moxaLowWaterChk;
static void moxa_low_water_check(void __iomem *);
/*****************************************************************************
* Driver level functions: *
* 3. MoxaDriverPoll(void); *
*****************************************************************************/
static void MoxaPortFlushData(struct moxa_port *port, int mode)
{
void __iomem *ofsAddr;
if ((mode < 0) || (mode > 2))
return;
ofsAddr = port->tableAddr;
moxafunc(ofsAddr, FC_FlushQueue, mode);
if (mode != 1) {
port->lowChkFlag = 0;
moxa_low_water_check(ofsAddr);
}
}
static int MoxaDriverPoll(void)
{
struct moxa_board_conf *brd;
struct moxa_port *p;
void __iomem *ofsAddr;
void __iomem *ip;
unsigned int port, ports, card;
ushort temp;
for (card = 0; card < MAX_BOARDS; card++) {
brd = &moxa_boards[card];
if (brd->ready == 0)
continue;
if ((ports = brd->numPorts) == 0)
continue;
if (readb(brd->intPend) == 0xff) {
ip = brd->intTable + readb(brd->intNdx);
p = brd->ports;
ports <<= 1;
for (port = 0; port < ports; port += 2, p++) {
temp = readw(ip + port);
if (temp == 0)
continue;
writew(0, ip + port);
ofsAddr = p->tableAddr;
if (temp & IntrTx)
writew(readw(ofsAddr + HostStat) &
~WakeupTx, ofsAddr + HostStat);
if (temp & IntrBreak)
p->breakCnt++;
if (temp & IntrLine) {
if (readb(ofsAddr + FlagStat) & DCD_state) {
if ((p->DCDState & DCD_oldstate) == 0)
p->DCDState = (DCD_oldstate |
DCD_changed);
} else {
if (p->DCDState & DCD_oldstate)
p->DCDState = DCD_changed;
}
}
}
writeb(0, brd->intPend);
}
if (moxaLowWaterChk) {
p = brd->ports;
for (port = 0; port < ports; port++, p++) {
if (p->lowChkFlag) {
p->lowChkFlag = 0;
ofsAddr = p->tableAddr;
moxa_low_water_check(ofsAddr);
}
}
}
}
moxaLowWaterChk = 0;
return 0;
}
/*****************************************************************************
* Port level functions: *
* 2. MoxaPortEnable(int port); *
* 3. MoxaPortDisable(int port); *
* 4. MoxaPortGetMaxBaud(int port); *
* 6. MoxaPortSetBaud(int port, long baud); *
* 8. MoxaPortSetTermio(int port, unsigned char *termio); *
* 9. MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); *
* 10. MoxaPortLineCtrl(int port, int dtrState, int rtsState); *
* 11. MoxaPortFlowCtrl(int port, int rts, int cts, int rx, int tx,int xany); *
* 12. MoxaPortLineStatus(int port); *
* 13. MoxaPortDCDChange(int port); *
* 14. MoxaPortDCDON(int port); *
* 15. MoxaPortFlushData(int port, int mode); *
* 16. MoxaPortWriteData(int port, unsigned char * buffer, int length); *
* 17. MoxaPortReadData(int port, struct tty_struct *tty); *
* 20. MoxaPortTxQueue(int port); *
* 21. MoxaPortTxFree(int port); *
* 22. MoxaPortRxQueue(int port); *
* 24. MoxaPortTxDisable(int port); *
* 25. MoxaPortTxEnable(int port); *
* 27. MoxaPortResetBrkCnt(int port); *
*****************************************************************************/
/*
* Moxa Port Number Description:
*
* MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
* the port number using in MOXA driver functions will be 0 to 31 for
* first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
* to 127 for fourth. For example, if you setup three MOXA boards,
* first board is C218, second board is C320-16 and third board is
* C320-32. The port number of first board (C218 - 8 ports) is from
* 0 to 7. The port number of second board (C320 - 16 ports) is form
* 32 to 47. The port number of third board (C320 - 32 ports) is from
* 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
* 127 will be invalid.
*
*
* Moxa Functions Description:
*
* Function 1: Driver initialization routine, this routine must be
* called when initialized driver.
* Syntax:
* void MoxaDriverInit();
*
*
* Function 2: Moxa driver private IOCTL command processing.
* Syntax:
* int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
*
* unsigned int cmd : IOCTL command
* unsigned long arg : IOCTL argument
* int port : port number (0 - 127)
*
* return: 0 (OK)
* -EINVAL
* -ENOIOCTLCMD
*
*
* Function 3: Moxa driver polling process routine.
* Syntax:
* int MoxaDriverPoll(void);
*
* return: 0 ; polling O.K.
* -1 : no any Moxa card.
*
*
* Function 6: Enable this port to start Tx/Rx data.
* Syntax:
* void MoxaPortEnable(int port);
* int port : port number (0 - 127)
*
*
* Function 7: Disable this port
* Syntax:
* void MoxaPortDisable(int port);
* int port : port number (0 - 127)
*
*
* Function 8: Get the maximun available baud rate of this port.
* Syntax:
* long MoxaPortGetMaxBaud(int port);
* int port : port number (0 - 127)
*
* return: 0 : this port is invalid
* 38400/57600/115200 bps
*
*
* Function 10: Setting baud rate of this port.
* Syntax:
* long MoxaPortSetBaud(int port, long baud);
* int port : port number (0 - 127)
* long baud : baud rate (50 - 115200)
*
* return: 0 : this port is invalid or baud < 50
* 50 - 115200 : the real baud rate set to the port, if
* the argument baud is large than maximun
* available baud rate, the real setting
* baud rate will be the maximun baud rate.
*
*
* Function 12: Configure the port.
* Syntax:
* int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
* int port : port number (0 - 127)
* struct ktermios * termio : termio structure pointer
* speed_t baud : baud rate
*
* return: -1 : this port is invalid or termio == NULL
* 0 : setting O.K.
*
*
* Function 13: Get the DTR/RTS state of this port.
* Syntax:
* int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
* int port : port number (0 - 127)
* int * dtrState : pointer to INT to receive the current DTR
* state. (if NULL, this function will not
* write to this address)
* int * rtsState : pointer to INT to receive the current RTS
* state. (if NULL, this function will not
* write to this address)
*
* return: -1 : this port is invalid
* 0 : O.K.
*
*
* Function 14: Setting the DTR/RTS output state of this port.
* Syntax:
* void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
* int port : port number (0 - 127)
* int dtrState : DTR output state (0: off, 1: on)
* int rtsState : RTS output state (0: off, 1: on)
*
*
* Function 15: Setting the flow control of this port.
* Syntax:
* void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
* int txFlow,int xany);
* int port : port number (0 - 127)
* int rtsFlow : H/W RTS flow control (0: no, 1: yes)
* int ctsFlow : H/W CTS flow control (0: no, 1: yes)
* int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes)
* int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes)
* int xany : S/W XANY flow control (0: no, 1: yes)
*
*
* Function 16: Get ths line status of this port
* Syntax:
* int MoxaPortLineStatus(int port);
* int port : port number (0 - 127)
*
* return: Bit 0 - CTS state (0: off, 1: on)
* Bit 1 - DSR state (0: off, 1: on)
* Bit 2 - DCD state (0: off, 1: on)
*
*
* Function 17: Check the DCD state has changed since the last read
* of this function.
* Syntax:
* int MoxaPortDCDChange(int port);
* int port : port number (0 - 127)
*
* return: 0 : no changed
* 1 : DCD has changed
*
*
* Function 18: Check ths current DCD state is ON or not.
* Syntax:
* int MoxaPortDCDON(int port);
* int port : port number (0 - 127)
*
* return: 0 : DCD off
* 1 : DCD on
*
*
* Function 19: Flush the Rx/Tx buffer data of this port.
* Syntax:
* void MoxaPortFlushData(int port, int mode);
* int port : port number (0 - 127)
* int mode
* 0 : flush the Rx buffer
* 1 : flush the Tx buffer
* 2 : flush the Rx and Tx buffer
*
*
* Function 20: Write data.
* Syntax:
* int MoxaPortWriteData(int port, unsigned char * buffer, int length);
* int port : port number (0 - 127)
* unsigned char * buffer : pointer to write data buffer.
* int length : write data length
*
* return: 0 - length : real write data length
*
*
* Function 21: Read data.
* Syntax:
* int MoxaPortReadData(int port, struct tty_struct *tty);
* int port : port number (0 - 127)
* struct tty_struct *tty : tty for data
*
* return: 0 - length : real read data length
*
*
* Function 24: Get the Tx buffer current queued data bytes
* Syntax:
* int MoxaPortTxQueue(int port);
* int port : port number (0 - 127)
*
* return: .. : Tx buffer current queued data bytes
*
*
* Function 25: Get the Tx buffer current free space
* Syntax:
* int MoxaPortTxFree(int port);
* int port : port number (0 - 127)
*
* return: .. : Tx buffer current free space
*
*
* Function 26: Get the Rx buffer current queued data bytes
* Syntax:
* int MoxaPortRxQueue(int port);
* int port : port number (0 - 127)
*
* return: .. : Rx buffer current queued data bytes
*
*
* Function 28: Disable port data transmission.
* Syntax:
* void MoxaPortTxDisable(int port);
* int port : port number (0 - 127)
*
*
* Function 29: Enable port data transmission.
* Syntax:
* void MoxaPortTxEnable(int port);
* int port : port number (0 - 127)
*
*
* Function 31: Get the received BREAK signal count and reset it.
* Syntax:
* int MoxaPortResetBrkCnt(int port);
* int port : port number (0 - 127)
*
* return: 0 - .. : BREAK signal count
*
*
*/
static void MoxaPortEnable(struct moxa_port *port)
{
void __iomem *ofsAddr;
short lowwater = 512;
ofsAddr = port->tableAddr;
writew(lowwater, ofsAddr + Low_water);
port->breakCnt = 0;
if (port->board->boardType == MOXA_BOARD_C320_ISA ||
port->board->boardType == MOXA_BOARD_C320_PCI) {
moxafunc(ofsAddr, FC_SetBreakIrq, 0);
} else {
writew(readw(ofsAddr + HostStat) | WakeupBreak, ofsAddr + HostStat);
}
moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
moxafunc(ofsAddr, FC_FlushQueue, 2);
moxafunc(ofsAddr, FC_EnableCH, Magic_code);
MoxaPortLineStatus(port);
}
static void MoxaPortDisable(struct moxa_port *port)
{
void __iomem *ofsAddr = port->tableAddr;
moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */
moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
writew(0, ofsAddr + HostStat);
moxafunc(ofsAddr, FC_DisableCH, Magic_code);
}
static long MoxaPortGetMaxBaud(struct moxa_port *port)
{
if (port->board->boardType == MOXA_BOARD_C320_ISA ||
port->board->boardType == MOXA_BOARD_C320_PCI)
return (460800L);
else
return (921600L);
}
static long MoxaPortSetBaud(struct moxa_port *port, long baud)
{
void __iomem *ofsAddr;
long max, clock;
unsigned int val;
if ((baud < 50L) || ((max = MoxaPortGetMaxBaud(port)) == 0))
return (0);
ofsAddr = port->tableAddr;
if (baud > max)
baud = max;
if (max == 38400L)
clock = 614400L; /* for 9.8304 Mhz : max. 38400 bps */
else if (max == 57600L)
clock = 691200L; /* for 11.0592 Mhz : max. 57600 bps */
else
clock = 921600L; /* for 14.7456 Mhz : max. 115200 bps */
val = clock / baud;
moxafunc(ofsAddr, FC_SetBaud, val);
baud = clock / val;
return (baud);
}
static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
speed_t baud)
{
void __iomem *ofsAddr;
tcflag_t cflag;
tcflag_t mode = 0;
ofsAddr = port->tableAddr;
cflag = termio->c_cflag; /* termio->c_cflag */
mode = termio->c_cflag & CSIZE;
if (mode == CS5)
mode = MX_CS5;
else if (mode == CS6)
mode = MX_CS6;
else if (mode == CS7)
mode = MX_CS7;
else if (mode == CS8)
mode = MX_CS8;
if (termio->c_cflag & CSTOPB) {
if (mode == MX_CS5)
mode |= MX_STOP15;
else
mode |= MX_STOP2;
} else
mode |= MX_STOP1;
if (termio->c_cflag & PARENB) {
if (termio->c_cflag & PARODD)
mode |= MX_PARODD;
else
mode |= MX_PAREVEN;
} else
mode |= MX_PARNONE;
moxafunc(ofsAddr, FC_SetDataMode, (ushort) mode);
if (port->board->boardType == MOXA_BOARD_C320_ISA ||
port->board->boardType == MOXA_BOARD_C320_PCI) {
if (baud >= 921600L)
return (-1);
}
baud = MoxaPortSetBaud(port, baud);
if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
writeb(FC_SetXonXoff, ofsAddr + FuncCode);
moxa_wait_finish(ofsAddr);
}
return (baud);
}
static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
int *rtsState)
{
if (dtrState)
*dtrState = !!(port->lineCtrl & DTR_ON);
if (rtsState)
*rtsState = !!(port->lineCtrl & RTS_ON);
return (0);
}
static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
{
int mode = 0;
if (dtr)
mode |= DTR_ON;
if (rts)
mode |= RTS_ON;
port->lineCtrl = mode;
moxafunc(port->tableAddr, FC_LineControl, mode);
}
static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
int txflow, int rxflow, int txany)
{
int mode = 0;
if (rts)
mode |= RTS_FlowCtl;
if (cts)
mode |= CTS_FlowCtl;
if (txflow)
mode |= Tx_FlowCtl;
if (rxflow)
mode |= Rx_FlowCtl;
if (txany)
mode |= IXM_IXANY;
moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
}
static int MoxaPortLineStatus(struct moxa_port *port)
{
void __iomem *ofsAddr;
int val;
ofsAddr = port->tableAddr;
if (port->board->boardType == MOXA_BOARD_C320_ISA ||
port->board->boardType == MOXA_BOARD_C320_PCI) {
moxafunc(ofsAddr, FC_LineStatus, 0);
val = readw(ofsAddr + FuncArg);
} else {
val = readw(ofsAddr + FlagStat) >> 4;
}
val &= 0x0B;
if (val & 8) {
val |= 4;
if ((port->DCDState & DCD_oldstate) == 0)
port->DCDState = (DCD_oldstate | DCD_changed);
} else {
if (port->DCDState & DCD_oldstate)
port->DCDState = DCD_changed;
}
val &= 7;
return (val);
}
static int MoxaPortDCDChange(struct moxa_port *port)
{
int n;
n = port->DCDState;
port->DCDState &= ~DCD_changed;
n &= DCD_changed;
return (n);
}
static int MoxaPortDCDON(struct moxa_port *port)
{
int n;
if (port->DCDState & DCD_oldstate)
n = 1;
else
n = 0;
return (n);
}
static int MoxaPortWriteData(struct moxa_port *port, unsigned char *buffer,
int len)
{
int c, total, i;
ushort tail;
int cnt;
ushort head, tx_mask, spage, epage;
ushort pageno, pageofs, bufhead;
void __iomem *baseAddr, *ofsAddr, *ofs;
ofsAddr = port->tableAddr;
baseAddr = port->board->basemem;
tx_mask = readw(ofsAddr + TX_mask);
spage = readw(ofsAddr + Page_txb);
epage = readw(ofsAddr + EndPage_txb);
tail = readw(ofsAddr + TXwptr);
head = readw(ofsAddr + TXrptr);
c = (head > tail) ? (head - tail - 1)
: (head - tail + tx_mask);
if (c > len)
c = len;
moxaLog.txcnt[port->tty->index] += c;
total = c;
if (spage == epage) {
bufhead = readw(ofsAddr + Ofs_txb);
writew(spage, baseAddr + Control_reg);
while (c > 0) {
if (head > tail)
len = head - tail - 1;
else
len = tx_mask + 1 - tail;
len = (c > len) ? len : c;
ofs = baseAddr + DynPage_addr + bufhead + tail;
for (i = 0; i < len; i++)
writeb(*buffer++, ofs + i);
tail = (tail + len) & tx_mask;
c -= len;
}
writew(tail, ofsAddr + TXwptr);
} else {
len = c;
pageno = spage + (tail >> 13);
pageofs = tail & Page_mask;
do {
cnt = Page_size - pageofs;
if (cnt > c)
cnt = c;
c -= cnt;
writeb(pageno, baseAddr + Control_reg);
ofs = baseAddr + DynPage_addr + pageofs;
for (i = 0; i < cnt; i++)
writeb(*buffer++, ofs + i);
if (c == 0) {
writew((tail + len) & tx_mask, ofsAddr + TXwptr);
break;
}
if (++pageno == epage)
pageno = spage;
pageofs = 0;
} while (1);
}
writeb(1, ofsAddr + CD180TXirq); /* start to send */
return (total);
}
static int MoxaPortReadData(struct moxa_port *port, struct tty_struct *tty)
{
register ushort head, pageofs;
int i, count, cnt, len, total, remain;
ushort tail, rx_mask, spage, epage;
ushort pageno, bufhead;
void __iomem *baseAddr, *ofsAddr, *ofs;
ofsAddr = port->tableAddr;
baseAddr = port->board->basemem;
head = readw(ofsAddr + RXrptr);
tail = readw(ofsAddr + RXwptr);
rx_mask = readw(ofsAddr + RX_mask);
spage = readw(ofsAddr + Page_rxb);
epage = readw(ofsAddr + EndPage_rxb);
count = (tail >= head) ? (tail - head)
: (tail - head + rx_mask + 1);
if (count == 0)
return 0;
total = count;
remain = count - total;
moxaLog.rxcnt[port->tty->index] += total;
count = total;
if (spage == epage) {
bufhead = readw(ofsAddr + Ofs_rxb);
writew(spage, baseAddr + Control_reg);
while (count > 0) {
if (tail >= head)
len = tail - head;
else
len = rx_mask + 1 - head;
len = (count > len) ? len : count;
ofs = baseAddr + DynPage_addr + bufhead + head;
for (i = 0; i < len; i++)
tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL);
head = (head + len) & rx_mask;
count -= len;
}
writew(head, ofsAddr + RXrptr);
} else {
len = count;
pageno = spage + (head >> 13);
pageofs = head & Page_mask;
do {
cnt = Page_size - pageofs;
if (cnt > count)
cnt = count;
count -= cnt;
writew(pageno, baseAddr + Control_reg);
ofs = baseAddr + DynPage_addr + pageofs;
for (i = 0; i < cnt; i++)
tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL);
if (count == 0) {
writew((head + len) & rx_mask, ofsAddr + RXrptr);
break;
}
if (++pageno == epage)
pageno = spage;
pageofs = 0;
} while (1);
}
if ((readb(ofsAddr + FlagStat) & Xoff_state) && (remain < LowWater)) {
moxaLowWaterChk = 1;
port->lowChkFlag = 1;
}
return (total);
}
static int MoxaPortTxQueue(struct moxa_port *port)
{
void __iomem *ofsAddr = port->tableAddr;
ushort rptr, wptr, mask;
int len;
rptr = readw(ofsAddr + TXrptr);
wptr = readw(ofsAddr + TXwptr);
mask = readw(ofsAddr + TX_mask);
len = (wptr - rptr) & mask;
return (len);
}
static int MoxaPortTxFree(struct moxa_port *port)
{
void __iomem *ofsAddr = port->tableAddr;
ushort rptr, wptr, mask;
int len;
rptr = readw(ofsAddr + TXrptr);
wptr = readw(ofsAddr + TXwptr);
mask = readw(ofsAddr + TX_mask);
len = mask - ((wptr - rptr) & mask);
return (len);
}
static int MoxaPortRxQueue(struct moxa_port *port)
{
void __iomem *ofsAddr = port->tableAddr;
ushort rptr, wptr, mask;
int len;
rptr = readw(ofsAddr + RXrptr);
wptr = readw(ofsAddr + RXwptr);
mask = readw(ofsAddr + RX_mask);
len = (wptr - rptr) & mask;
return (len);
}
static void MoxaPortTxDisable(struct moxa_port *port)
{
moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
}
static void MoxaPortTxEnable(struct moxa_port *port)
{
moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
}
static int MoxaPortResetBrkCnt(struct moxa_port *port)
{
ushort cnt;
cnt = port->breakCnt;
port->breakCnt = 0;
return (cnt);
}
static int moxa_get_serial_info(struct moxa_port *info,
struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
memset(&tmp, 0, sizeof(tmp));
tmp.type = info->type;
tmp.line = info->tty->index;
tmp.port = 0;
tmp.irq = 0;
tmp.flags = info->asyncflags;
tmp.baud_base = 921600;
tmp.close_delay = info->close_delay;
tmp.custom_divisor = 0;
tmp.hub6 = 0;
if(copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return (0);
}
static int moxa_set_serial_info(struct moxa_port *info,
struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
if(copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
if ((new_serial.irq != 0) ||
(new_serial.port != 0) ||
// (new_serial.type != info->type) ||
(new_serial.custom_divisor != 0) ||
(new_serial.baud_base != 921600))
return (-EPERM);
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
(info->asyncflags & ~ASYNC_USR_MASK)))
return (-EPERM);
} else {
info->close_delay = new_serial.close_delay * HZ / 100;
}
new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
new_serial.flags |= (info->asyncflags & ASYNC_FLAGS);
if (new_serial.type == PORT_16550A) {
MoxaSetFifo(info, 1);
} else {
MoxaSetFifo(info, 0);
}
info->type = new_serial.type;
return (0);
}
/*****************************************************************************
* Static local functions: *
*****************************************************************************/
static void moxa_low_water_check(void __iomem *ofsAddr)
{
int len;
ushort rptr, wptr, mask;
if (readb(ofsAddr + FlagStat) & Xoff_state) {
rptr = readw(ofsAddr + RXrptr);
wptr = readw(ofsAddr + RXwptr);
mask = readw(ofsAddr + RX_mask);
len = (wptr - rptr) & mask;
if (len <= Low_water)
moxafunc(ofsAddr, FC_SendXon, 0);
}
}
static void MoxaSetFifo(struct moxa_port *port, int enable)
{
void __iomem *ofsAddr = port->tableAddr;
if (!enable) {
moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
} else {
moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
}
}