fb76dd10b9
This one adds support of a combined irq source for the whole matrix keypad. This can be useful if all rows and columns of the keypad are e.g. connected to a GPIO expander, which only has one interrupt line for all events on every single GPIO. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
518 lines
13 KiB
C
518 lines
13 KiB
C
/*
|
|
* GPIO driven matrix keyboard driver
|
|
*
|
|
* Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on corgikbd.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/slab.h>
|
|
|
|
struct matrix_keypad {
|
|
const struct matrix_keypad_platform_data *pdata;
|
|
struct input_dev *input_dev;
|
|
unsigned short *keycodes;
|
|
unsigned int row_shift;
|
|
|
|
DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS);
|
|
|
|
uint32_t last_key_state[MATRIX_MAX_COLS];
|
|
struct delayed_work work;
|
|
spinlock_t lock;
|
|
bool scan_pending;
|
|
bool stopped;
|
|
bool gpio_all_disabled;
|
|
};
|
|
|
|
/*
|
|
* NOTE: normally the GPIO has to be put into HiZ when de-activated to cause
|
|
* minmal side effect when scanning other columns, here it is configured to
|
|
* be input, and it should work on most platforms.
|
|
*/
|
|
static void __activate_col(const struct matrix_keypad_platform_data *pdata,
|
|
int col, bool on)
|
|
{
|
|
bool level_on = !pdata->active_low;
|
|
|
|
if (on) {
|
|
gpio_direction_output(pdata->col_gpios[col], level_on);
|
|
} else {
|
|
gpio_set_value_cansleep(pdata->col_gpios[col], !level_on);
|
|
gpio_direction_input(pdata->col_gpios[col]);
|
|
}
|
|
}
|
|
|
|
static void activate_col(const struct matrix_keypad_platform_data *pdata,
|
|
int col, bool on)
|
|
{
|
|
__activate_col(pdata, col, on);
|
|
|
|
if (on && pdata->col_scan_delay_us)
|
|
udelay(pdata->col_scan_delay_us);
|
|
}
|
|
|
|
static void activate_all_cols(const struct matrix_keypad_platform_data *pdata,
|
|
bool on)
|
|
{
|
|
int col;
|
|
|
|
for (col = 0; col < pdata->num_col_gpios; col++)
|
|
__activate_col(pdata, col, on);
|
|
}
|
|
|
|
static bool row_asserted(const struct matrix_keypad_platform_data *pdata,
|
|
int row)
|
|
{
|
|
return gpio_get_value_cansleep(pdata->row_gpios[row]) ?
|
|
!pdata->active_low : pdata->active_low;
|
|
}
|
|
|
|
static void enable_row_irqs(struct matrix_keypad *keypad)
|
|
{
|
|
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
|
|
int i;
|
|
|
|
if (pdata->clustered_irq > 0)
|
|
enable_irq(pdata->clustered_irq);
|
|
else {
|
|
for (i = 0; i < pdata->num_row_gpios; i++)
|
|
enable_irq(gpio_to_irq(pdata->row_gpios[i]));
|
|
}
|
|
}
|
|
|
|
static void disable_row_irqs(struct matrix_keypad *keypad)
|
|
{
|
|
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
|
|
int i;
|
|
|
|
if (pdata->clustered_irq > 0)
|
|
disable_irq_nosync(pdata->clustered_irq);
|
|
else {
|
|
for (i = 0; i < pdata->num_row_gpios; i++)
|
|
disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This gets the keys from keyboard and reports it to input subsystem
|
|
*/
|
|
static void matrix_keypad_scan(struct work_struct *work)
|
|
{
|
|
struct matrix_keypad *keypad =
|
|
container_of(work, struct matrix_keypad, work.work);
|
|
struct input_dev *input_dev = keypad->input_dev;
|
|
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
|
|
uint32_t new_state[MATRIX_MAX_COLS];
|
|
int row, col, code;
|
|
|
|
/* de-activate all columns for scanning */
|
|
activate_all_cols(pdata, false);
|
|
|
|
memset(new_state, 0, sizeof(new_state));
|
|
|
|
/* assert each column and read the row status out */
|
|
for (col = 0; col < pdata->num_col_gpios; col++) {
|
|
|
|
activate_col(pdata, col, true);
|
|
|
|
for (row = 0; row < pdata->num_row_gpios; row++)
|
|
new_state[col] |=
|
|
row_asserted(pdata, row) ? (1 << row) : 0;
|
|
|
|
activate_col(pdata, col, false);
|
|
}
|
|
|
|
for (col = 0; col < pdata->num_col_gpios; col++) {
|
|
uint32_t bits_changed;
|
|
|
|
bits_changed = keypad->last_key_state[col] ^ new_state[col];
|
|
if (bits_changed == 0)
|
|
continue;
|
|
|
|
for (row = 0; row < pdata->num_row_gpios; row++) {
|
|
if ((bits_changed & (1 << row)) == 0)
|
|
continue;
|
|
|
|
code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
|
|
input_event(input_dev, EV_MSC, MSC_SCAN, code);
|
|
input_report_key(input_dev,
|
|
keypad->keycodes[code],
|
|
new_state[col] & (1 << row));
|
|
}
|
|
}
|
|
input_sync(input_dev);
|
|
|
|
memcpy(keypad->last_key_state, new_state, sizeof(new_state));
|
|
|
|
activate_all_cols(pdata, true);
|
|
|
|
/* Enable IRQs again */
|
|
spin_lock_irq(&keypad->lock);
|
|
keypad->scan_pending = false;
|
|
enable_row_irqs(keypad);
|
|
spin_unlock_irq(&keypad->lock);
|
|
}
|
|
|
|
static irqreturn_t matrix_keypad_interrupt(int irq, void *id)
|
|
{
|
|
struct matrix_keypad *keypad = id;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&keypad->lock, flags);
|
|
|
|
/*
|
|
* See if another IRQ beaten us to it and scheduled the
|
|
* scan already. In that case we should not try to
|
|
* disable IRQs again.
|
|
*/
|
|
if (unlikely(keypad->scan_pending || keypad->stopped))
|
|
goto out;
|
|
|
|
disable_row_irqs(keypad);
|
|
keypad->scan_pending = true;
|
|
schedule_delayed_work(&keypad->work,
|
|
msecs_to_jiffies(keypad->pdata->debounce_ms));
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&keypad->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int matrix_keypad_start(struct input_dev *dev)
|
|
{
|
|
struct matrix_keypad *keypad = input_get_drvdata(dev);
|
|
|
|
keypad->stopped = false;
|
|
mb();
|
|
|
|
/*
|
|
* Schedule an immediate key scan to capture current key state;
|
|
* columns will be activated and IRQs be enabled after the scan.
|
|
*/
|
|
schedule_delayed_work(&keypad->work, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void matrix_keypad_stop(struct input_dev *dev)
|
|
{
|
|
struct matrix_keypad *keypad = input_get_drvdata(dev);
|
|
|
|
keypad->stopped = true;
|
|
mb();
|
|
flush_work(&keypad->work.work);
|
|
/*
|
|
* matrix_keypad_scan() will leave IRQs enabled;
|
|
* we should disable them now.
|
|
*/
|
|
disable_row_irqs(keypad);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
|
|
{
|
|
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
|
|
unsigned int gpio;
|
|
int i;
|
|
|
|
if (pdata->clustered_irq > 0) {
|
|
if (enable_irq_wake(pdata->clustered_irq) == 0)
|
|
keypad->gpio_all_disabled = true;
|
|
} else {
|
|
|
|
for (i = 0; i < pdata->num_row_gpios; i++) {
|
|
if (!test_bit(i, keypad->disabled_gpios)) {
|
|
gpio = pdata->row_gpios[i];
|
|
|
|
if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
|
|
__set_bit(i, keypad->disabled_gpios);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
|
|
{
|
|
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
|
|
unsigned int gpio;
|
|
int i;
|
|
|
|
if (pdata->clustered_irq > 0) {
|
|
if (keypad->gpio_all_disabled) {
|
|
disable_irq_wake(pdata->clustered_irq);
|
|
keypad->gpio_all_disabled = false;
|
|
}
|
|
} else {
|
|
for (i = 0; i < pdata->num_row_gpios; i++) {
|
|
if (test_and_clear_bit(i, keypad->disabled_gpios)) {
|
|
gpio = pdata->row_gpios[i];
|
|
disable_irq_wake(gpio_to_irq(gpio));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int matrix_keypad_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
|
|
|
|
matrix_keypad_stop(keypad->input_dev);
|
|
|
|
if (device_may_wakeup(&pdev->dev))
|
|
matrix_keypad_enable_wakeup(keypad);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int matrix_keypad_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
|
|
|
|
if (device_may_wakeup(&pdev->dev))
|
|
matrix_keypad_disable_wakeup(keypad);
|
|
|
|
matrix_keypad_start(keypad->input_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
|
|
matrix_keypad_suspend, matrix_keypad_resume);
|
|
#endif
|
|
|
|
static int __devinit init_matrix_gpio(struct platform_device *pdev,
|
|
struct matrix_keypad *keypad)
|
|
{
|
|
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
|
|
int i, err = -EINVAL;
|
|
|
|
/* initialized strobe lines as outputs, activated */
|
|
for (i = 0; i < pdata->num_col_gpios; i++) {
|
|
err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col");
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"failed to request GPIO%d for COL%d\n",
|
|
pdata->col_gpios[i], i);
|
|
goto err_free_cols;
|
|
}
|
|
|
|
gpio_direction_output(pdata->col_gpios[i], !pdata->active_low);
|
|
}
|
|
|
|
for (i = 0; i < pdata->num_row_gpios; i++) {
|
|
err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row");
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"failed to request GPIO%d for ROW%d\n",
|
|
pdata->row_gpios[i], i);
|
|
goto err_free_rows;
|
|
}
|
|
|
|
gpio_direction_input(pdata->row_gpios[i]);
|
|
}
|
|
|
|
if (pdata->clustered_irq > 0) {
|
|
err = request_irq(pdata->clustered_irq,
|
|
matrix_keypad_interrupt,
|
|
pdata->clustered_irq_flags,
|
|
"matrix-keypad", keypad);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"Unable to acquire clustered interrupt\n");
|
|
goto err_free_rows;
|
|
}
|
|
} else {
|
|
for (i = 0; i < pdata->num_row_gpios; i++) {
|
|
err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
|
|
matrix_keypad_interrupt,
|
|
IRQF_DISABLED |
|
|
IRQF_TRIGGER_RISING |
|
|
IRQF_TRIGGER_FALLING,
|
|
"matrix-keypad", keypad);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"Unable to acquire interrupt "
|
|
"for GPIO line %i\n",
|
|
pdata->row_gpios[i]);
|
|
goto err_free_irqs;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* initialized as disabled - enabled by input->open */
|
|
disable_row_irqs(keypad);
|
|
return 0;
|
|
|
|
err_free_irqs:
|
|
while (--i >= 0)
|
|
free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
|
|
i = pdata->num_row_gpios;
|
|
err_free_rows:
|
|
while (--i >= 0)
|
|
gpio_free(pdata->row_gpios[i]);
|
|
i = pdata->num_col_gpios;
|
|
err_free_cols:
|
|
while (--i >= 0)
|
|
gpio_free(pdata->col_gpios[i]);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int __devinit matrix_keypad_probe(struct platform_device *pdev)
|
|
{
|
|
const struct matrix_keypad_platform_data *pdata;
|
|
const struct matrix_keymap_data *keymap_data;
|
|
struct matrix_keypad *keypad;
|
|
struct input_dev *input_dev;
|
|
unsigned short *keycodes;
|
|
unsigned int row_shift;
|
|
int err;
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "no platform data defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
keymap_data = pdata->keymap_data;
|
|
if (!keymap_data) {
|
|
dev_err(&pdev->dev, "no keymap data defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
row_shift = get_count_order(pdata->num_col_gpios);
|
|
|
|
keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
|
|
keycodes = kzalloc((pdata->num_row_gpios << row_shift) *
|
|
sizeof(*keycodes),
|
|
GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!keypad || !keycodes || !input_dev) {
|
|
err = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
keypad->input_dev = input_dev;
|
|
keypad->pdata = pdata;
|
|
keypad->keycodes = keycodes;
|
|
keypad->row_shift = row_shift;
|
|
keypad->stopped = true;
|
|
INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
|
|
spin_lock_init(&keypad->lock);
|
|
|
|
input_dev->name = pdev->name;
|
|
input_dev->id.bustype = BUS_HOST;
|
|
input_dev->dev.parent = &pdev->dev;
|
|
input_dev->evbit[0] = BIT_MASK(EV_KEY);
|
|
if (!pdata->no_autorepeat)
|
|
input_dev->evbit[0] |= BIT_MASK(EV_REP);
|
|
input_dev->open = matrix_keypad_start;
|
|
input_dev->close = matrix_keypad_stop;
|
|
|
|
input_dev->keycode = keycodes;
|
|
input_dev->keycodesize = sizeof(*keycodes);
|
|
input_dev->keycodemax = pdata->num_row_gpios << row_shift;
|
|
|
|
matrix_keypad_build_keymap(keymap_data, row_shift,
|
|
input_dev->keycode, input_dev->keybit);
|
|
|
|
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
|
|
input_set_drvdata(input_dev, keypad);
|
|
|
|
err = init_matrix_gpio(pdev, keypad);
|
|
if (err)
|
|
goto err_free_mem;
|
|
|
|
err = input_register_device(keypad->input_dev);
|
|
if (err)
|
|
goto err_free_mem;
|
|
|
|
device_init_wakeup(&pdev->dev, pdata->wakeup);
|
|
platform_set_drvdata(pdev, keypad);
|
|
|
|
return 0;
|
|
|
|
err_free_mem:
|
|
input_free_device(input_dev);
|
|
kfree(keycodes);
|
|
kfree(keypad);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit matrix_keypad_remove(struct platform_device *pdev)
|
|
{
|
|
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
|
|
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
|
|
int i;
|
|
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
|
|
if (pdata->clustered_irq > 0) {
|
|
free_irq(pdata->clustered_irq, keypad);
|
|
} else {
|
|
for (i = 0; i < pdata->num_row_gpios; i++)
|
|
free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
|
|
}
|
|
|
|
for (i = 0; i < pdata->num_row_gpios; i++)
|
|
gpio_free(pdata->row_gpios[i]);
|
|
|
|
for (i = 0; i < pdata->num_col_gpios; i++)
|
|
gpio_free(pdata->col_gpios[i]);
|
|
|
|
input_unregister_device(keypad->input_dev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(keypad->keycodes);
|
|
kfree(keypad);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver matrix_keypad_driver = {
|
|
.probe = matrix_keypad_probe,
|
|
.remove = __devexit_p(matrix_keypad_remove),
|
|
.driver = {
|
|
.name = "matrix-keypad",
|
|
.owner = THIS_MODULE,
|
|
#ifdef CONFIG_PM
|
|
.pm = &matrix_keypad_pm_ops,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
static int __init matrix_keypad_init(void)
|
|
{
|
|
return platform_driver_register(&matrix_keypad_driver);
|
|
}
|
|
|
|
static void __exit matrix_keypad_exit(void)
|
|
{
|
|
platform_driver_unregister(&matrix_keypad_driver);
|
|
}
|
|
|
|
module_init(matrix_keypad_init);
|
|
module_exit(matrix_keypad_exit);
|
|
|
|
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
|
|
MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:matrix-keypad");
|