ebc3f64b86
This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
---|---|---|
.. | ||
bluetooth | ||
irda | ||
sctp | ||
tc_act | ||
act_api.h | ||
act_generic.h | ||
addrconf.h | ||
af_unix.h | ||
ah.h | ||
arp.h | ||
atmclip.h | ||
ax25.h | ||
checksum.h | ||
compat.h | ||
datalink.h | ||
dn_dev.h | ||
dn_fib.h | ||
dn_neigh.h | ||
dn_nsp.h | ||
dn_route.h | ||
dn.h | ||
dsfield.h | ||
dst.h | ||
esp.h | ||
flow.h | ||
gen_stats.h | ||
icmp.h | ||
if_inet6.h | ||
inet_common.h | ||
inet_ecn.h | ||
inetpeer.h | ||
ip6_checksum.h | ||
ip6_fib.h | ||
ip6_route.h | ||
ip6_tunnel.h | ||
ip_fib.h | ||
ip_mp_alg.h | ||
ip_vs.h | ||
ip.h | ||
ipcomp.h | ||
ipconfig.h | ||
ipip.h | ||
ipv6.h | ||
ipx.h | ||
iw_handler.h | ||
lapb.h | ||
llc_c_ac.h | ||
llc_c_ev.h | ||
llc_c_st.h | ||
llc_conn.h | ||
llc_if.h | ||
llc_pdu.h | ||
llc_s_ac.h | ||
llc_s_ev.h | ||
llc_s_st.h | ||
llc_sap.h | ||
llc.h | ||
ndisc.h | ||
neighbour.h | ||
netrom.h | ||
p8022.h | ||
pkt_act.h | ||
pkt_cls.h | ||
pkt_sched.h | ||
protocol.h | ||
psnap.h | ||
raw.h | ||
rawv6.h | ||
request_sock.h | ||
rose.h | ||
route.h | ||
sch_generic.h | ||
scm.h | ||
slhc_vj.h | ||
snmp.h | ||
sock.h | ||
syncppp.h | ||
tcp_ecn.h | ||
tcp.h | ||
transp_v6.h | ||
udp.h | ||
x25.h | ||
x25device.h | ||
xfrm.h |