3550b9313b
This patch adds board support for ATNGW100 mkII. This board is an upgrade of the ATNGW100 where the difference is an additional 256 MB NAND flash device and 128 MB 32-bit SDRAM instead of the 32 MB 16-bit SDRAM on ATNGW100. Tested on ATNGW100 mkII, duh (-: Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
179 lines
4.5 KiB
C
179 lines
4.5 KiB
C
/*
|
|
* Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100
|
|
* Network Gateway
|
|
*
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <video/atmel_lcdc.h>
|
|
|
|
#include <asm/setup.h>
|
|
|
|
#include <mach/at32ap700x.h>
|
|
#include <mach/portmux.h>
|
|
#include <mach/board.h>
|
|
|
|
#include <sound/atmel-ac97c.h>
|
|
|
|
static struct ac97c_platform_data __initdata ac97c0_data = {
|
|
.reset_pin = GPIO_PIN_PB(19),
|
|
};
|
|
|
|
#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA
|
|
static struct fb_videomode __initdata tcg057vglad_modes[] = {
|
|
{
|
|
.name = "640x480 @ 50",
|
|
.refresh = 50,
|
|
.xres = 640, .yres = 480,
|
|
.pixclock = KHZ2PICOS(25180),
|
|
|
|
.left_margin = 64, .right_margin = 96,
|
|
.upper_margin = 34, .lower_margin = 11,
|
|
.hsync_len = 64, .vsync_len = 15,
|
|
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
},
|
|
};
|
|
|
|
static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
|
|
.manufacturer = "KYO",
|
|
.monitor = "TCG057VGLAD",
|
|
.modedb = tcg057vglad_modes,
|
|
.modedb_len = ARRAY_SIZE(tcg057vglad_modes),
|
|
.hfmin = 19948,
|
|
.hfmax = 31478,
|
|
.vfmin = 50,
|
|
.vfmax = 67,
|
|
.dclkmax = 28330000,
|
|
};
|
|
|
|
static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
|
|
.default_bpp = 16,
|
|
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
|
|
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
|
|
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
|
|
| ATMEL_LCDC_MEMOR_BIG),
|
|
.default_monspecs = &atevklcd10x_default_monspecs,
|
|
.guard_time = 2,
|
|
};
|
|
#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA
|
|
static struct fb_videomode __initdata tcg057qvlad_modes[] = {
|
|
{
|
|
.name = "320x240 @ 50",
|
|
.refresh = 50,
|
|
.xres = 320, .yres = 240,
|
|
.pixclock = KHZ2PICOS(6300),
|
|
|
|
.left_margin = 34, .right_margin = 46,
|
|
.upper_margin = 7, .lower_margin = 15,
|
|
.hsync_len = 64, .vsync_len = 12,
|
|
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
},
|
|
};
|
|
|
|
static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
|
|
.manufacturer = "KYO",
|
|
.monitor = "TCG057QVLAD",
|
|
.modedb = tcg057qvlad_modes,
|
|
.modedb_len = ARRAY_SIZE(tcg057qvlad_modes),
|
|
.hfmin = 19948,
|
|
.hfmax = 31478,
|
|
.vfmin = 50,
|
|
.vfmax = 67,
|
|
.dclkmax = 7000000,
|
|
};
|
|
|
|
static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
|
|
.default_bpp = 16,
|
|
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
|
|
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
|
|
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
|
|
| ATMEL_LCDC_MEMOR_BIG),
|
|
.default_monspecs = &atevklcd10x_default_monspecs,
|
|
.guard_time = 2,
|
|
};
|
|
#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA
|
|
static struct fb_videomode __initdata ph320240t_modes[] = {
|
|
{
|
|
.name = "320x240 @ 60",
|
|
.refresh = 60,
|
|
.xres = 320, .yres = 240,
|
|
.pixclock = KHZ2PICOS(6300),
|
|
|
|
.left_margin = 38, .right_margin = 20,
|
|
.upper_margin = 15, .lower_margin = 5,
|
|
.hsync_len = 30, .vsync_len = 3,
|
|
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
},
|
|
};
|
|
|
|
static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
|
|
.manufacturer = "POW",
|
|
.monitor = "PH320240T",
|
|
.modedb = ph320240t_modes,
|
|
.modedb_len = ARRAY_SIZE(ph320240t_modes),
|
|
.hfmin = 14400,
|
|
.hfmax = 21600,
|
|
.vfmin = 50,
|
|
.vfmax = 90,
|
|
.dclkmax = 6400000,
|
|
};
|
|
|
|
static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
|
|
.default_bpp = 16,
|
|
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
|
|
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
|
|
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
|
|
| ATMEL_LCDC_MEMOR_BIG),
|
|
.default_monspecs = &atevklcd10x_default_monspecs,
|
|
.guard_time = 2,
|
|
};
|
|
#endif
|
|
|
|
static void atevklcd10x_lcdc_power_control(int on)
|
|
{
|
|
gpio_set_value(GPIO_PIN_PB(15), on);
|
|
}
|
|
|
|
static int __init atevklcd10x_init(void)
|
|
{
|
|
/* PB15 is connected to the enable line on the boost regulator
|
|
* controlling the backlight for the LCD panel.
|
|
*/
|
|
at32_select_gpio(GPIO_PIN_PB(15), AT32_GPIOF_OUTPUT);
|
|
gpio_request(GPIO_PIN_PB(15), "backlight");
|
|
gpio_direction_output(GPIO_PIN_PB(15), 0);
|
|
|
|
atevklcd10x_lcdc_data.atmel_lcdfb_power_control =
|
|
atevklcd10x_lcdc_power_control;
|
|
|
|
at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,
|
|
fbmem_start, fbmem_size,
|
|
#ifdef CONFIG_BOARD_ATNGW100_MKII
|
|
ATMEL_LCDC_PRI_18BIT | ATMEL_LCDC_PC_DVAL
|
|
#else
|
|
ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL
|
|
#endif
|
|
);
|
|
|
|
at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
|
|
|
|
return 0;
|
|
}
|
|
postcore_initcall(atevklcd10x_init);
|