android_kernel_xiaomi_sm8350/drivers/char/nsc_gpio.c
Jim Cromie 23916a8e3d [PATCH] chardev: GPIO for SCx200 & PC-8736x: display pin values in/out in gpio_dump
Add current pin settings to gpio_dump() output.  This adds the last 'word' to
the syslog lines, which displays the input and output values that the pin is
set to.

  pc8736x_gpio.0: io00: 0x0044 TS OD PUE  EDGE LO DEBOUNCE        io:1/1

The 2 values may differ for a number of reasons:
1- the pin output circuitry is diaabled, (as the above 'TS' indicates)
2- it needs a pullup resistor to drive the attached circuit,
3- the external circuit needs a pullup so the open-drain has something
   to pull-down
4- the pin is wired to Vcc or Ground

It might be appropriate to add a WARN for 2,3,4, since they could
damage the chip and/or circuit, esp if misconfig goes unnoticed.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:43 -07:00

143 lines
3.5 KiB
C

/* linux/drivers/char/nsc_gpio.c
National Semiconductor common GPIO device-file/VFS methods.
Allows a user space process to control the GPIO pins.
Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com>
*/
#include <linux/config.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/nsc_gpio.h>
#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#define NAME "nsc_gpio"
void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index)
{
/* retrieve current config w/o changing it */
u32 config = amp->gpio_config(index, ~0, 0);
/* user requested via 'v' command, so its INFO */
dev_info(amp->dev, "io%02u: 0x%04x %s %s %s %s %s %s %s\tio:%d/%d\n",
index, config,
(config & 1) ? "OE" : "TS", /* output-enabled/tristate */
(config & 2) ? "PP" : "OD", /* push pull / open drain */
(config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */
(config & 8) ? "LOCKED" : "", /* locked / unlocked */
(config & 16) ? "LEVEL" : "EDGE",/* level/edge input */
(config & 32) ? "HI" : "LO", /* trigger on rise/fall edge */
(config & 64) ? "DEBOUNCE" : "", /* debounce */
amp->gpio_get(index), amp->gpio_current(index));
}
ssize_t nsc_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
unsigned m = iminor(file->f_dentry->d_inode);
struct nsc_gpio_ops *amp = file->private_data;
struct device *dev = amp->dev;
size_t i;
int err = 0;
for (i = 0; i < len; ++i) {
char c;
if (get_user(c, data + i))
return -EFAULT;
switch (c) {
case '0':
amp->gpio_set(m, 0);
break;
case '1':
amp->gpio_set(m, 1);
break;
case 'O':
dev_dbg(dev, "GPIO%d output enabled\n", m);
amp->gpio_config(m, ~1, 1);
break;
case 'o':
dev_dbg(dev, "GPIO%d output disabled\n", m);
amp->gpio_config(m, ~1, 0);
break;
case 'T':
dev_dbg(dev, "GPIO%d output is push pull\n",
m);
amp->gpio_config(m, ~2, 2);
break;
case 't':
dev_dbg(dev, "GPIO%d output is open drain\n",
m);
amp->gpio_config(m, ~2, 0);
break;
case 'P':
dev_dbg(dev, "GPIO%d pull up enabled\n", m);
amp->gpio_config(m, ~4, 4);
break;
case 'p':
dev_dbg(dev, "GPIO%d pull up disabled\n", m);
amp->gpio_config(m, ~4, 0);
break;
case 'v':
/* View Current pin settings */
amp->gpio_dump(amp, m);
break;
case '\n':
/* end of settings string, do nothing */
break;
default:
dev_err(dev, "io%2d bad setting: chr<0x%2x>\n",
m, (int)c);
err++;
}
}
if (err)
return -EINVAL; /* full string handled, report error */
return len;
}
ssize_t nsc_gpio_read(struct file *file, char __user * buf,
size_t len, loff_t * ppos)
{
unsigned m = iminor(file->f_dentry->d_inode);
int value;
struct nsc_gpio_ops *amp = file->private_data;
value = amp->gpio_get(m);
if (put_user(value ? '1' : '0', buf))
return -EFAULT;
return 1;
}
/* common file-ops routines for both scx200_gpio and pc87360_gpio */
EXPORT_SYMBOL(nsc_gpio_write);
EXPORT_SYMBOL(nsc_gpio_read);
EXPORT_SYMBOL(nsc_gpio_dump);
static int __init nsc_gpio_init(void)
{
printk(KERN_DEBUG NAME " initializing\n");
return 0;
}
static void __exit nsc_gpio_cleanup(void)
{
printk(KERN_DEBUG NAME " cleanup\n");
}
module_init(nsc_gpio_init);
module_exit(nsc_gpio_cleanup);
MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
MODULE_DESCRIPTION("NatSemi GPIO Common Methods");
MODULE_LICENSE("GPL");