android_kernel_xiaomi_sm8350/kernel/time/tick-common.c
Venkatesh Pallipadi 7c1e768974 clockevents: prevent clockevent event_handler ending up handler_noop
There is a ordering related problem with clockevents code, due to which
clockevents_register_device() called after tickless/highres switch
will not work. The new clockevent ends up with clockevents_handle_noop as
event handler, resulting in no timer activity.

The problematic path seems to be

* old device already has hrtimer_interrupt as the event_handler
* new clockevent device registers with a higher rating
* tick_check_new_device() is called
  * clockevents_exchange_device() gets called
    * old->event_handler is set to clockevents_handle_noop
  * tick_setup_device() is called for the new device
    * which sets new->event_handler using the old->event_handler which is noop.

Change the ordering so that new device inherits the proper handler.

This does not have any issue in normal case as most likely all the clockevent
devices are setup before the highres switch. But, can potentially be affecting
some corner case where HPET force detect happens after the highres switch.
This was a problem with HPET in MSI mode code that we have been experimenting
with.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 11:11:51 +02:00

393 lines
8.8 KiB
C

/*
* linux/kernel/time/tick-common.c
*
* This file contains the base functions to manage periodic tick
* related events.
*
* Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
* Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
* Copyright(C) 2006-2007, Timesys Corp., Thomas Gleixner
*
* This code is licenced under the GPL version 2. For details see
* kernel-base/COPYING.
*/
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/hrtimer.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/profile.h>
#include <linux/sched.h>
#include <linux/tick.h>
#include <asm/irq_regs.h>
#include "tick-internal.h"
/*
* Tick devices
*/
DEFINE_PER_CPU(struct tick_device, tick_cpu_device);
/*
* Tick next event: keeps track of the tick time
*/
ktime_t tick_next_period;
ktime_t tick_period;
int tick_do_timer_cpu __read_mostly = -1;
DEFINE_SPINLOCK(tick_device_lock);
/*
* Debugging: see timer_list.c
*/
struct tick_device *tick_get_device(int cpu)
{
return &per_cpu(tick_cpu_device, cpu);
}
/**
* tick_is_oneshot_available - check for a oneshot capable event device
*/
int tick_is_oneshot_available(void)
{
struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
return dev && (dev->features & CLOCK_EVT_FEAT_ONESHOT);
}
/*
* Periodic tick
*/
static void tick_periodic(int cpu)
{
if (tick_do_timer_cpu == cpu) {
write_seqlock(&xtime_lock);
/* Keep track of the next tick event */
tick_next_period = ktime_add(tick_next_period, tick_period);
do_timer(1);
write_sequnlock(&xtime_lock);
}
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
}
/*
* Event handler for periodic ticks
*/
void tick_handle_periodic(struct clock_event_device *dev)
{
int cpu = smp_processor_id();
ktime_t next;
tick_periodic(cpu);
if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
return;
/*
* Setup the next period for devices, which do not have
* periodic mode:
*/
next = ktime_add(dev->next_event, tick_period);
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
tick_periodic(cpu);
next = ktime_add(next, tick_period);
}
}
/*
* Setup the device for a periodic tick
*/
void tick_setup_periodic(struct clock_event_device *dev, int broadcast)
{
tick_set_periodic_handler(dev, broadcast);
/* Broadcast setup ? */
if (!tick_device_is_functional(dev))
return;
if (dev->features & CLOCK_EVT_FEAT_PERIODIC) {
clockevents_set_mode(dev, CLOCK_EVT_MODE_PERIODIC);
} else {
unsigned long seq;
ktime_t next;
do {
seq = read_seqbegin(&xtime_lock);
next = tick_next_period;
} while (read_seqretry(&xtime_lock, seq));
clockevents_set_mode(dev, CLOCK_EVT_MODE_ONESHOT);
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
next = ktime_add(next, tick_period);
}
}
}
/*
* Setup the tick device
*/
static void tick_setup_device(struct tick_device *td,
struct clock_event_device *newdev, int cpu,
const cpumask_t *cpumask)
{
ktime_t next_event;
void (*handler)(struct clock_event_device *) = NULL;
/*
* First device setup ?
*/
if (!td->evtdev) {
/*
* If no cpu took the do_timer update, assign it to
* this cpu:
*/
if (tick_do_timer_cpu == -1) {
tick_do_timer_cpu = cpu;
tick_next_period = ktime_get();
tick_period = ktime_set(0, NSEC_PER_SEC / HZ);
}
/*
* Startup in periodic mode first.
*/
td->mode = TICKDEV_MODE_PERIODIC;
} else {
handler = td->evtdev->event_handler;
next_event = td->evtdev->next_event;
td->evtdev->event_handler = clockevents_handle_noop;
}
td->evtdev = newdev;
/*
* When the device is not per cpu, pin the interrupt to the
* current cpu:
*/
if (!cpus_equal(newdev->cpumask, *cpumask))
irq_set_affinity(newdev->irq, *cpumask);
/*
* When global broadcasting is active, check if the current
* device is registered as a placeholder for broadcast mode.
* This allows us to handle this x86 misfeature in a generic
* way.
*/
if (tick_device_uses_broadcast(newdev, cpu))
return;
if (td->mode == TICKDEV_MODE_PERIODIC)
tick_setup_periodic(newdev, 0);
else
tick_setup_oneshot(newdev, handler, next_event);
}
/*
* Check, if the new registered device should be used.
*/
static int tick_check_new_device(struct clock_event_device *newdev)
{
struct clock_event_device *curdev;
struct tick_device *td;
int cpu, ret = NOTIFY_OK;
unsigned long flags;
spin_lock_irqsave(&tick_device_lock, flags);
cpu = smp_processor_id();
if (!cpu_isset(cpu, newdev->cpumask))
goto out_bc;
td = &per_cpu(tick_cpu_device, cpu);
curdev = td->evtdev;
/* cpu local device ? */
if (!cpus_equal(newdev->cpumask, cpumask_of_cpu(cpu))) {
/*
* If the cpu affinity of the device interrupt can not
* be set, ignore it.
*/
if (!irq_can_set_affinity(newdev->irq))
goto out_bc;
/*
* If we have a cpu local device already, do not replace it
* by a non cpu local device
*/
if (curdev && cpus_equal(curdev->cpumask, cpumask_of_cpu(cpu)))
goto out_bc;
}
/*
* If we have an active device, then check the rating and the oneshot
* feature.
*/
if (curdev) {
/*
* Prefer one shot capable devices !
*/
if ((curdev->features & CLOCK_EVT_FEAT_ONESHOT) &&
!(newdev->features & CLOCK_EVT_FEAT_ONESHOT))
goto out_bc;
/*
* Check the rating
*/
if (curdev->rating >= newdev->rating)
goto out_bc;
}
/*
* Replace the eventually existing device by the new
* device. If the current device is the broadcast device, do
* not give it back to the clockevents layer !
*/
if (tick_is_broadcast_device(curdev)) {
clockevents_set_mode(curdev, CLOCK_EVT_MODE_SHUTDOWN);
curdev = NULL;
}
clockevents_exchange_device(curdev, newdev);
tick_setup_device(td, newdev, cpu, &cpumask_of_cpu(cpu));
if (newdev->features & CLOCK_EVT_FEAT_ONESHOT)
tick_oneshot_notify();
spin_unlock_irqrestore(&tick_device_lock, flags);
return NOTIFY_STOP;
out_bc:
/*
* Can the new device be used as a broadcast device ?
*/
if (tick_check_broadcast_device(newdev))
ret = NOTIFY_STOP;
spin_unlock_irqrestore(&tick_device_lock, flags);
return ret;
}
/*
* Shutdown an event device on a given cpu:
*
* This is called on a life CPU, when a CPU is dead. So we cannot
* access the hardware device itself.
* We just set the mode and remove it from the lists.
*/
static void tick_shutdown(unsigned int *cpup)
{
struct tick_device *td = &per_cpu(tick_cpu_device, *cpup);
struct clock_event_device *dev = td->evtdev;
unsigned long flags;
spin_lock_irqsave(&tick_device_lock, flags);
td->mode = TICKDEV_MODE_PERIODIC;
if (dev) {
/*
* Prevent that the clock events layer tries to call
* the set mode function!
*/
dev->mode = CLOCK_EVT_MODE_UNUSED;
clockevents_exchange_device(dev, NULL);
td->evtdev = NULL;
}
/* Transfer the do_timer job away from this cpu */
if (*cpup == tick_do_timer_cpu) {
int cpu = first_cpu(cpu_online_map);
tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : -1;
}
spin_unlock_irqrestore(&tick_device_lock, flags);
}
static void tick_suspend(void)
{
struct tick_device *td = &__get_cpu_var(tick_cpu_device);
unsigned long flags;
spin_lock_irqsave(&tick_device_lock, flags);
clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
spin_unlock_irqrestore(&tick_device_lock, flags);
}
static void tick_resume(void)
{
struct tick_device *td = &__get_cpu_var(tick_cpu_device);
unsigned long flags;
int broadcast = tick_resume_broadcast();
spin_lock_irqsave(&tick_device_lock, flags);
clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_RESUME);
if (!broadcast) {
if (td->mode == TICKDEV_MODE_PERIODIC)
tick_setup_periodic(td->evtdev, 0);
else
tick_resume_oneshot();
}
spin_unlock_irqrestore(&tick_device_lock, flags);
}
/*
* Notification about clock event devices
*/
static int tick_notify(struct notifier_block *nb, unsigned long reason,
void *dev)
{
switch (reason) {
case CLOCK_EVT_NOTIFY_ADD:
return tick_check_new_device(dev);
case CLOCK_EVT_NOTIFY_BROADCAST_ON:
case CLOCK_EVT_NOTIFY_BROADCAST_OFF:
case CLOCK_EVT_NOTIFY_BROADCAST_FORCE:
tick_broadcast_on_off(reason, dev);
break;
case CLOCK_EVT_NOTIFY_BROADCAST_ENTER:
case CLOCK_EVT_NOTIFY_BROADCAST_EXIT:
tick_broadcast_oneshot_control(reason);
break;
case CLOCK_EVT_NOTIFY_CPU_DEAD:
tick_shutdown_broadcast_oneshot(dev);
tick_shutdown_broadcast(dev);
tick_shutdown(dev);
break;
case CLOCK_EVT_NOTIFY_SUSPEND:
tick_suspend();
tick_suspend_broadcast();
break;
case CLOCK_EVT_NOTIFY_RESUME:
tick_resume();
break;
default:
break;
}
return NOTIFY_OK;
}
static struct notifier_block tick_notifier = {
.notifier_call = tick_notify,
};
/**
* tick_init - initialize the tick control
*
* Register the notifier with the clockevents framework
*/
void __init tick_init(void)
{
clockevents_register_notifier(&tick_notifier);
}