1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
261 lines
7.3 KiB
C
261 lines
7.3 KiB
C
/*
|
|
i2c-i810.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
monitoring
|
|
Copyright (c) 1998, 1999, 2000 Frodo Looijaard <frodol@dds.nl>,
|
|
Philip Edelbrock <phil@netroedge.com>,
|
|
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
|
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
|
|
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
|
|
Simon Vogl
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
/*
|
|
This interfaces to the I810/I815 to provide access to
|
|
the DDC Bus and the I2C Bus.
|
|
|
|
SUPPORTED DEVICES PCI ID
|
|
i810AA 7121
|
|
i810AB 7123
|
|
i810E 7125
|
|
i815 1132
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <asm/io.h>
|
|
|
|
/* GPIO register locations */
|
|
#define I810_IOCONTROL_OFFSET 0x5000
|
|
#define I810_HVSYNC 0x00 /* not used */
|
|
#define I810_GPIOA 0x10
|
|
#define I810_GPIOB 0x14
|
|
|
|
/* bit locations in the registers */
|
|
#define SCL_DIR_MASK 0x0001
|
|
#define SCL_DIR 0x0002
|
|
#define SCL_VAL_MASK 0x0004
|
|
#define SCL_VAL_OUT 0x0008
|
|
#define SCL_VAL_IN 0x0010
|
|
#define SDA_DIR_MASK 0x0100
|
|
#define SDA_DIR 0x0200
|
|
#define SDA_VAL_MASK 0x0400
|
|
#define SDA_VAL_OUT 0x0800
|
|
#define SDA_VAL_IN 0x1000
|
|
|
|
/* initialization states */
|
|
#define INIT1 0x1
|
|
#define INIT2 0x2
|
|
#define INIT3 0x4
|
|
|
|
/* delays */
|
|
#define CYCLE_DELAY 10
|
|
#define TIMEOUT (HZ / 2)
|
|
|
|
static void __iomem *ioaddr;
|
|
|
|
/* The i810 GPIO registers have individual masks for each bit
|
|
so we never have to read before writing. Nice. */
|
|
|
|
static void bit_i810i2c_setscl(void *data, int val)
|
|
{
|
|
writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
|
|
ioaddr + I810_GPIOB);
|
|
readl(ioaddr + I810_GPIOB); /* flush posted write */
|
|
}
|
|
|
|
static void bit_i810i2c_setsda(void *data, int val)
|
|
{
|
|
writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
|
|
ioaddr + I810_GPIOB);
|
|
readl(ioaddr + I810_GPIOB); /* flush posted write */
|
|
}
|
|
|
|
/* The GPIO pins are open drain, so the pins could always remain outputs.
|
|
However, some chip versions don't latch the inputs unless they
|
|
are set as inputs.
|
|
We rely on the i2c-algo-bit routines to set the pins high before
|
|
reading the input from other chips. Following guidance in the 815
|
|
prog. ref. guide, we do a "dummy write" of 0 to the register before
|
|
reading which forces the input value to be latched. We presume this
|
|
applies to the 810 as well; shouldn't hurt anyway. This is necessary to get
|
|
i2c_algo_bit bit_test=1 to pass. */
|
|
|
|
static int bit_i810i2c_getscl(void *data)
|
|
{
|
|
writel(SCL_DIR_MASK, ioaddr + I810_GPIOB);
|
|
writel(0, ioaddr + I810_GPIOB);
|
|
return (0 != (readl(ioaddr + I810_GPIOB) & SCL_VAL_IN));
|
|
}
|
|
|
|
static int bit_i810i2c_getsda(void *data)
|
|
{
|
|
writel(SDA_DIR_MASK, ioaddr + I810_GPIOB);
|
|
writel(0, ioaddr + I810_GPIOB);
|
|
return (0 != (readl(ioaddr + I810_GPIOB) & SDA_VAL_IN));
|
|
}
|
|
|
|
static void bit_i810ddc_setscl(void *data, int val)
|
|
{
|
|
writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
|
|
ioaddr + I810_GPIOA);
|
|
readl(ioaddr + I810_GPIOA); /* flush posted write */
|
|
}
|
|
|
|
static void bit_i810ddc_setsda(void *data, int val)
|
|
{
|
|
writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
|
|
ioaddr + I810_GPIOA);
|
|
readl(ioaddr + I810_GPIOA); /* flush posted write */
|
|
}
|
|
|
|
static int bit_i810ddc_getscl(void *data)
|
|
{
|
|
writel(SCL_DIR_MASK, ioaddr + I810_GPIOA);
|
|
writel(0, ioaddr + I810_GPIOA);
|
|
return (0 != (readl(ioaddr + I810_GPIOA) & SCL_VAL_IN));
|
|
}
|
|
|
|
static int bit_i810ddc_getsda(void *data)
|
|
{
|
|
writel(SDA_DIR_MASK, ioaddr + I810_GPIOA);
|
|
writel(0, ioaddr + I810_GPIOA);
|
|
return (0 != (readl(ioaddr + I810_GPIOA) & SDA_VAL_IN));
|
|
}
|
|
|
|
static int config_i810(struct pci_dev *dev)
|
|
{
|
|
unsigned long cadr;
|
|
|
|
/* map I810 memory */
|
|
cadr = dev->resource[1].start;
|
|
cadr += I810_IOCONTROL_OFFSET;
|
|
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
ioaddr = ioremap_nocache(cadr, 0x1000);
|
|
if (ioaddr) {
|
|
bit_i810i2c_setscl(NULL, 1);
|
|
bit_i810i2c_setsda(NULL, 1);
|
|
bit_i810ddc_setscl(NULL, 1);
|
|
bit_i810ddc_setsda(NULL, 1);
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct i2c_algo_bit_data i810_i2c_bit_data = {
|
|
.setsda = bit_i810i2c_setsda,
|
|
.setscl = bit_i810i2c_setscl,
|
|
.getsda = bit_i810i2c_getsda,
|
|
.getscl = bit_i810i2c_getscl,
|
|
.udelay = CYCLE_DELAY,
|
|
.mdelay = CYCLE_DELAY,
|
|
.timeout = TIMEOUT,
|
|
};
|
|
|
|
static struct i2c_adapter i810_i2c_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.name = "I810/I815 I2C Adapter",
|
|
.algo_data = &i810_i2c_bit_data,
|
|
};
|
|
|
|
static struct i2c_algo_bit_data i810_ddc_bit_data = {
|
|
.setsda = bit_i810ddc_setsda,
|
|
.setscl = bit_i810ddc_setscl,
|
|
.getsda = bit_i810ddc_getsda,
|
|
.getscl = bit_i810ddc_getscl,
|
|
.udelay = CYCLE_DELAY,
|
|
.mdelay = CYCLE_DELAY,
|
|
.timeout = TIMEOUT,
|
|
};
|
|
|
|
static struct i2c_adapter i810_ddc_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.name = "I810/I815 DDC Adapter",
|
|
.algo_data = &i810_ddc_bit_data,
|
|
};
|
|
|
|
static struct pci_device_id i810_ids[] __devinitdata = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG1) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810E_IG) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG) },
|
|
{ 0, },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (pci, i810_ids);
|
|
|
|
static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
int retval;
|
|
|
|
retval = config_i810(dev);
|
|
if (retval)
|
|
return retval;
|
|
dev_info(&dev->dev, "i810/i815 i2c device found.\n");
|
|
|
|
/* set up the sysfs linkage to our parent device */
|
|
i810_i2c_adapter.dev.parent = &dev->dev;
|
|
i810_ddc_adapter.dev.parent = &dev->dev;
|
|
|
|
retval = i2c_bit_add_bus(&i810_i2c_adapter);
|
|
if (retval)
|
|
return retval;
|
|
retval = i2c_bit_add_bus(&i810_ddc_adapter);
|
|
if (retval)
|
|
i2c_bit_del_bus(&i810_i2c_adapter);
|
|
return retval;
|
|
}
|
|
|
|
static void __devexit i810_remove(struct pci_dev *dev)
|
|
{
|
|
i2c_bit_del_bus(&i810_ddc_adapter);
|
|
i2c_bit_del_bus(&i810_i2c_adapter);
|
|
iounmap(ioaddr);
|
|
}
|
|
|
|
static struct pci_driver i810_driver = {
|
|
.name = "i810_smbus",
|
|
.id_table = i810_ids,
|
|
.probe = i810_probe,
|
|
.remove = __devexit_p(i810_remove),
|
|
};
|
|
|
|
static int __init i2c_i810_init(void)
|
|
{
|
|
return pci_register_driver(&i810_driver);
|
|
}
|
|
|
|
static void __exit i2c_i810_exit(void)
|
|
{
|
|
pci_unregister_driver(&i810_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
|
"Philip Edelbrock <phil@netroedge.com>, "
|
|
"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
|
|
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
|
MODULE_DESCRIPTION("I810/I815 I2C/DDC driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(i2c_i810_init);
|
|
module_exit(i2c_i810_exit);
|