e948e99400
Signed-off-by: Dave Airlie <airlied@redhat.com>
1136 lines
34 KiB
C
1136 lines
34 KiB
C
/* i915_drv.h -- Private header for the I915 driver -*- linux-c -*-
|
|
*/
|
|
/*
|
|
*
|
|
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
|
|
* All Rights Reserved.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#ifndef _I915_DRV_H_
|
|
#define _I915_DRV_H_
|
|
|
|
/* General customization:
|
|
*/
|
|
|
|
#define DRIVER_AUTHOR "Tungsten Graphics, Inc."
|
|
|
|
#define DRIVER_NAME "i915"
|
|
#define DRIVER_DESC "Intel Graphics"
|
|
#define DRIVER_DATE "20060119"
|
|
|
|
/* Interface history:
|
|
*
|
|
* 1.1: Original.
|
|
* 1.2: Add Power Management
|
|
* 1.3: Add vblank support
|
|
* 1.4: Fix cmdbuffer path, add heap destroy
|
|
* 1.5: Add vblank pipe configuration
|
|
* 1.6: - New ioctl for scheduling buffer swaps on vertical blank
|
|
* - Support vertical blank on secondary display pipe
|
|
*/
|
|
#define DRIVER_MAJOR 1
|
|
#define DRIVER_MINOR 6
|
|
#define DRIVER_PATCHLEVEL 0
|
|
|
|
typedef struct _drm_i915_ring_buffer {
|
|
int tail_mask;
|
|
unsigned long Start;
|
|
unsigned long End;
|
|
unsigned long Size;
|
|
u8 *virtual_start;
|
|
int head;
|
|
int tail;
|
|
int space;
|
|
drm_local_map_t map;
|
|
} drm_i915_ring_buffer_t;
|
|
|
|
struct mem_block {
|
|
struct mem_block *next;
|
|
struct mem_block *prev;
|
|
int start;
|
|
int size;
|
|
struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */
|
|
};
|
|
|
|
typedef struct _drm_i915_vbl_swap {
|
|
struct list_head head;
|
|
drm_drawable_t drw_id;
|
|
unsigned int pipe;
|
|
unsigned int sequence;
|
|
} drm_i915_vbl_swap_t;
|
|
|
|
typedef struct drm_i915_private {
|
|
drm_local_map_t *sarea;
|
|
drm_local_map_t *mmio_map;
|
|
|
|
drm_i915_sarea_t *sarea_priv;
|
|
drm_i915_ring_buffer_t ring;
|
|
|
|
drm_dma_handle_t *status_page_dmah;
|
|
void *hw_status_page;
|
|
dma_addr_t dma_status_page;
|
|
unsigned long counter;
|
|
unsigned int status_gfx_addr;
|
|
drm_local_map_t hws_map;
|
|
|
|
unsigned int cpp;
|
|
int back_offset;
|
|
int front_offset;
|
|
int current_page;
|
|
int page_flipping;
|
|
int use_mi_batchbuffer_start;
|
|
|
|
wait_queue_head_t irq_queue;
|
|
atomic_t irq_received;
|
|
atomic_t irq_emitted;
|
|
|
|
int tex_lru_log_granularity;
|
|
int allow_batchbuffer;
|
|
struct mem_block *agp_heap;
|
|
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
|
|
int vblank_pipe;
|
|
|
|
spinlock_t swaps_lock;
|
|
drm_i915_vbl_swap_t vbl_swaps;
|
|
unsigned int swaps_pending;
|
|
|
|
/* Register state */
|
|
u8 saveLBB;
|
|
u32 saveDSPACNTR;
|
|
u32 saveDSPBCNTR;
|
|
u32 saveDSPARB;
|
|
u32 savePIPEACONF;
|
|
u32 savePIPEBCONF;
|
|
u32 savePIPEASRC;
|
|
u32 savePIPEBSRC;
|
|
u32 saveFPA0;
|
|
u32 saveFPA1;
|
|
u32 saveDPLL_A;
|
|
u32 saveDPLL_A_MD;
|
|
u32 saveHTOTAL_A;
|
|
u32 saveHBLANK_A;
|
|
u32 saveHSYNC_A;
|
|
u32 saveVTOTAL_A;
|
|
u32 saveVBLANK_A;
|
|
u32 saveVSYNC_A;
|
|
u32 saveBCLRPAT_A;
|
|
u32 savePIPEASTAT;
|
|
u32 saveDSPASTRIDE;
|
|
u32 saveDSPASIZE;
|
|
u32 saveDSPAPOS;
|
|
u32 saveDSPABASE;
|
|
u32 saveDSPASURF;
|
|
u32 saveDSPATILEOFF;
|
|
u32 savePFIT_PGM_RATIOS;
|
|
u32 saveBLC_PWM_CTL;
|
|
u32 saveBLC_PWM_CTL2;
|
|
u32 saveFPB0;
|
|
u32 saveFPB1;
|
|
u32 saveDPLL_B;
|
|
u32 saveDPLL_B_MD;
|
|
u32 saveHTOTAL_B;
|
|
u32 saveHBLANK_B;
|
|
u32 saveHSYNC_B;
|
|
u32 saveVTOTAL_B;
|
|
u32 saveVBLANK_B;
|
|
u32 saveVSYNC_B;
|
|
u32 saveBCLRPAT_B;
|
|
u32 savePIPEBSTAT;
|
|
u32 saveDSPBSTRIDE;
|
|
u32 saveDSPBSIZE;
|
|
u32 saveDSPBPOS;
|
|
u32 saveDSPBBASE;
|
|
u32 saveDSPBSURF;
|
|
u32 saveDSPBTILEOFF;
|
|
u32 saveVCLK_DIVISOR_VGA0;
|
|
u32 saveVCLK_DIVISOR_VGA1;
|
|
u32 saveVCLK_POST_DIV;
|
|
u32 saveVGACNTRL;
|
|
u32 saveADPA;
|
|
u32 saveLVDS;
|
|
u32 saveLVDSPP_ON;
|
|
u32 saveLVDSPP_OFF;
|
|
u32 saveDVOA;
|
|
u32 saveDVOB;
|
|
u32 saveDVOC;
|
|
u32 savePP_ON;
|
|
u32 savePP_OFF;
|
|
u32 savePP_CONTROL;
|
|
u32 savePP_CYCLE;
|
|
u32 savePFIT_CONTROL;
|
|
u32 save_palette_a[256];
|
|
u32 save_palette_b[256];
|
|
u32 saveFBC_CFB_BASE;
|
|
u32 saveFBC_LL_BASE;
|
|
u32 saveFBC_CONTROL;
|
|
u32 saveFBC_CONTROL2;
|
|
u32 saveIER;
|
|
u32 saveIIR;
|
|
u32 saveIMR;
|
|
u32 saveCACHE_MODE_0;
|
|
u32 saveD_STATE;
|
|
u32 saveDSPCLK_GATE_D;
|
|
u32 saveMI_ARB_STATE;
|
|
u32 saveSWF0[16];
|
|
u32 saveSWF1[16];
|
|
u32 saveSWF2[3];
|
|
u8 saveMSR;
|
|
u8 saveSR[8];
|
|
u8 saveGR[25];
|
|
u8 saveAR_INDEX;
|
|
u8 saveAR[21];
|
|
u8 saveDACMASK;
|
|
u8 saveDACDATA[256*3]; /* 256 3-byte colors */
|
|
u8 saveCR[37];
|
|
} drm_i915_private_t;
|
|
|
|
extern struct drm_ioctl_desc i915_ioctls[];
|
|
extern int i915_max_ioctl;
|
|
|
|
/* i915_dma.c */
|
|
extern void i915_kernel_lost_context(struct drm_device * dev);
|
|
extern int i915_driver_load(struct drm_device *, unsigned long flags);
|
|
extern int i915_driver_unload(struct drm_device *);
|
|
extern void i915_driver_lastclose(struct drm_device * dev);
|
|
extern void i915_driver_preclose(struct drm_device *dev,
|
|
struct drm_file *file_priv);
|
|
extern int i915_driver_device_is_agp(struct drm_device * dev);
|
|
extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
|
|
unsigned long arg);
|
|
|
|
/* i915_irq.c */
|
|
extern int i915_irq_emit(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
extern int i915_irq_wait(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
|
|
extern int i915_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence);
|
|
extern int i915_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence);
|
|
extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
|
|
extern void i915_driver_irq_preinstall(struct drm_device * dev);
|
|
extern void i915_driver_irq_postinstall(struct drm_device * dev);
|
|
extern void i915_driver_irq_uninstall(struct drm_device * dev);
|
|
extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
extern int i915_vblank_pipe_get(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
extern int i915_vblank_swap(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
|
|
/* i915_mem.c */
|
|
extern int i915_mem_alloc(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
extern int i915_mem_free(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
extern int i915_mem_init_heap(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
extern int i915_mem_destroy_heap(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
extern void i915_mem_takedown(struct mem_block **heap);
|
|
extern void i915_mem_release(struct drm_device * dev,
|
|
struct drm_file *file_priv, struct mem_block *heap);
|
|
|
|
#define I915_READ(reg) DRM_READ32(dev_priv->mmio_map, (reg))
|
|
#define I915_WRITE(reg,val) DRM_WRITE32(dev_priv->mmio_map, (reg), (val))
|
|
#define I915_READ16(reg) DRM_READ16(dev_priv->mmio_map, (reg))
|
|
#define I915_WRITE16(reg,val) DRM_WRITE16(dev_priv->mmio_map, (reg), (val))
|
|
|
|
#define I915_VERBOSE 0
|
|
|
|
#define RING_LOCALS unsigned int outring, ringmask, outcount; \
|
|
volatile char *virt;
|
|
|
|
#define BEGIN_LP_RING(n) do { \
|
|
if (I915_VERBOSE) \
|
|
DRM_DEBUG("BEGIN_LP_RING(%d)\n", (n)); \
|
|
if (dev_priv->ring.space < (n)*4) \
|
|
i915_wait_ring(dev, (n)*4, __func__); \
|
|
outcount = 0; \
|
|
outring = dev_priv->ring.tail; \
|
|
ringmask = dev_priv->ring.tail_mask; \
|
|
virt = dev_priv->ring.virtual_start; \
|
|
} while (0)
|
|
|
|
#define OUT_RING(n) do { \
|
|
if (I915_VERBOSE) DRM_DEBUG(" OUT_RING %x\n", (int)(n)); \
|
|
*(volatile unsigned int *)(virt + outring) = (n); \
|
|
outcount++; \
|
|
outring += 4; \
|
|
outring &= ringmask; \
|
|
} while (0)
|
|
|
|
#define ADVANCE_LP_RING() do { \
|
|
if (I915_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING %x\n", outring); \
|
|
dev_priv->ring.tail = outring; \
|
|
dev_priv->ring.space -= outcount * 4; \
|
|
I915_WRITE(LP_RING + RING_TAIL, outring); \
|
|
} while(0)
|
|
|
|
extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
|
|
|
|
/* Extended config space */
|
|
#define LBB 0xf4
|
|
|
|
/* VGA stuff */
|
|
|
|
#define VGA_ST01_MDA 0x3ba
|
|
#define VGA_ST01_CGA 0x3da
|
|
|
|
#define VGA_MSR_WRITE 0x3c2
|
|
#define VGA_MSR_READ 0x3cc
|
|
#define VGA_MSR_MEM_EN (1<<1)
|
|
#define VGA_MSR_CGA_MODE (1<<0)
|
|
|
|
#define VGA_SR_INDEX 0x3c4
|
|
#define VGA_SR_DATA 0x3c5
|
|
|
|
#define VGA_AR_INDEX 0x3c0
|
|
#define VGA_AR_VID_EN (1<<5)
|
|
#define VGA_AR_DATA_WRITE 0x3c0
|
|
#define VGA_AR_DATA_READ 0x3c1
|
|
|
|
#define VGA_GR_INDEX 0x3ce
|
|
#define VGA_GR_DATA 0x3cf
|
|
/* GR05 */
|
|
#define VGA_GR_MEM_READ_MODE_SHIFT 3
|
|
#define VGA_GR_MEM_READ_MODE_PLANE 1
|
|
/* GR06 */
|
|
#define VGA_GR_MEM_MODE_MASK 0xc
|
|
#define VGA_GR_MEM_MODE_SHIFT 2
|
|
#define VGA_GR_MEM_A0000_AFFFF 0
|
|
#define VGA_GR_MEM_A0000_BFFFF 1
|
|
#define VGA_GR_MEM_B0000_B7FFF 2
|
|
#define VGA_GR_MEM_B0000_BFFFF 3
|
|
|
|
#define VGA_DACMASK 0x3c6
|
|
#define VGA_DACRX 0x3c7
|
|
#define VGA_DACWX 0x3c8
|
|
#define VGA_DACDATA 0x3c9
|
|
|
|
#define VGA_CR_INDEX_MDA 0x3b4
|
|
#define VGA_CR_DATA_MDA 0x3b5
|
|
#define VGA_CR_INDEX_CGA 0x3d4
|
|
#define VGA_CR_DATA_CGA 0x3d5
|
|
|
|
#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23))
|
|
#define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23))
|
|
#define CMD_REPORT_HEAD (7<<23)
|
|
#define CMD_STORE_DWORD_IDX ((0x21<<23) | 0x1)
|
|
#define CMD_OP_BATCH_BUFFER ((0x0<<29)|(0x30<<23)|0x1)
|
|
|
|
#define INST_PARSER_CLIENT 0x00000000
|
|
#define INST_OP_FLUSH 0x02000000
|
|
#define INST_FLUSH_MAP_CACHE 0x00000001
|
|
|
|
#define BB1_START_ADDR_MASK (~0x7)
|
|
#define BB1_PROTECTED (1<<0)
|
|
#define BB1_UNPROTECTED (0<<0)
|
|
#define BB2_END_ADDR_MASK (~0x7)
|
|
|
|
/* Framebuffer compression */
|
|
#define FBC_CFB_BASE 0x03200 /* 4k page aligned */
|
|
#define FBC_LL_BASE 0x03204 /* 4k page aligned */
|
|
#define FBC_CONTROL 0x03208
|
|
#define FBC_CTL_EN (1<<31)
|
|
#define FBC_CTL_PERIODIC (1<<30)
|
|
#define FBC_CTL_INTERVAL_SHIFT (16)
|
|
#define FBC_CTL_UNCOMPRESSIBLE (1<<14)
|
|
#define FBC_CTL_STRIDE_SHIFT (5)
|
|
#define FBC_CTL_FENCENO (1<<0)
|
|
#define FBC_COMMAND 0x0320c
|
|
#define FBC_CMD_COMPRESS (1<<0)
|
|
#define FBC_STATUS 0x03210
|
|
#define FBC_STAT_COMPRESSING (1<<31)
|
|
#define FBC_STAT_COMPRESSED (1<<30)
|
|
#define FBC_STAT_MODIFIED (1<<29)
|
|
#define FBC_STAT_CURRENT_LINE (1<<0)
|
|
#define FBC_CONTROL2 0x03214
|
|
#define FBC_CTL_FENCE_DBL (0<<4)
|
|
#define FBC_CTL_IDLE_IMM (0<<2)
|
|
#define FBC_CTL_IDLE_FULL (1<<2)
|
|
#define FBC_CTL_IDLE_LINE (2<<2)
|
|
#define FBC_CTL_IDLE_DEBUG (3<<2)
|
|
#define FBC_CTL_CPU_FENCE (1<<1)
|
|
#define FBC_CTL_PLANEA (0<<0)
|
|
#define FBC_CTL_PLANEB (1<<0)
|
|
#define FBC_FENCE_OFF 0x0321b
|
|
|
|
#define FBC_LL_SIZE (1536)
|
|
#define FBC_LL_PAD (32)
|
|
|
|
/* Interrupt bits:
|
|
*/
|
|
#define USER_INT_FLAG (1<<1)
|
|
#define VSYNC_PIPEB_FLAG (1<<5)
|
|
#define VSYNC_PIPEA_FLAG (1<<7)
|
|
#define HWB_OOM_FLAG (1<<13) /* binner out of memory */
|
|
|
|
#define I915REG_HWSTAM 0x02098
|
|
#define I915REG_INT_IDENTITY_R 0x020a4
|
|
#define I915REG_INT_MASK_R 0x020a8
|
|
#define I915REG_INT_ENABLE_R 0x020a0
|
|
|
|
#define I915REG_PIPEASTAT 0x70024
|
|
#define I915REG_PIPEBSTAT 0x71024
|
|
|
|
#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
|
|
#define I915_VBLANK_CLEAR (1UL<<1)
|
|
|
|
#define SRX_INDEX 0x3c4
|
|
#define SRX_DATA 0x3c5
|
|
#define SR01 1
|
|
#define SR01_SCREEN_OFF (1<<5)
|
|
|
|
#define PPCR 0x61204
|
|
#define PPCR_ON (1<<0)
|
|
|
|
#define DVOB 0x61140
|
|
#define DVOB_ON (1<<31)
|
|
#define DVOC 0x61160
|
|
#define DVOC_ON (1<<31)
|
|
#define LVDS 0x61180
|
|
#define LVDS_ON (1<<31)
|
|
|
|
#define ADPA 0x61100
|
|
#define ADPA_DPMS_MASK (~(3<<10))
|
|
#define ADPA_DPMS_ON (0<<10)
|
|
#define ADPA_DPMS_SUSPEND (1<<10)
|
|
#define ADPA_DPMS_STANDBY (2<<10)
|
|
#define ADPA_DPMS_OFF (3<<10)
|
|
|
|
#define NOPID 0x2094
|
|
#define LP_RING 0x2030
|
|
#define HP_RING 0x2040
|
|
/* The binner has its own ring buffer:
|
|
*/
|
|
#define HWB_RING 0x2400
|
|
|
|
#define RING_TAIL 0x00
|
|
#define TAIL_ADDR 0x001FFFF8
|
|
#define RING_HEAD 0x04
|
|
#define HEAD_WRAP_COUNT 0xFFE00000
|
|
#define HEAD_WRAP_ONE 0x00200000
|
|
#define HEAD_ADDR 0x001FFFFC
|
|
#define RING_START 0x08
|
|
#define START_ADDR 0x0xFFFFF000
|
|
#define RING_LEN 0x0C
|
|
#define RING_NR_PAGES 0x001FF000
|
|
#define RING_REPORT_MASK 0x00000006
|
|
#define RING_REPORT_64K 0x00000002
|
|
#define RING_REPORT_128K 0x00000004
|
|
#define RING_NO_REPORT 0x00000000
|
|
#define RING_VALID_MASK 0x00000001
|
|
#define RING_VALID 0x00000001
|
|
#define RING_INVALID 0x00000000
|
|
|
|
/* Instruction parser error reg:
|
|
*/
|
|
#define IPEIR 0x2088
|
|
|
|
/* Scratch pad debug 0 reg:
|
|
*/
|
|
#define SCPD0 0x209c
|
|
|
|
/* Error status reg:
|
|
*/
|
|
#define ESR 0x20b8
|
|
|
|
/* Secondary DMA fetch address debug reg:
|
|
*/
|
|
#define DMA_FADD_S 0x20d4
|
|
|
|
/* Memory Interface Arbitration State
|
|
*/
|
|
#define MI_ARB_STATE 0x20e4
|
|
|
|
/* Cache mode 0 reg.
|
|
* - Manipulating render cache behaviour is central
|
|
* to the concept of zone rendering, tuning this reg can help avoid
|
|
* unnecessary render cache reads and even writes (for z/stencil)
|
|
* at beginning and end of scene.
|
|
*
|
|
* - To change a bit, write to this reg with a mask bit set and the
|
|
* bit of interest either set or cleared. EG: (BIT<<16) | BIT to set.
|
|
*/
|
|
#define Cache_Mode_0 0x2120
|
|
#define CACHE_MODE_0 0x2120
|
|
#define CM0_MASK_SHIFT 16
|
|
#define CM0_IZ_OPT_DISABLE (1<<6)
|
|
#define CM0_ZR_OPT_DISABLE (1<<5)
|
|
#define CM0_DEPTH_EVICT_DISABLE (1<<4)
|
|
#define CM0_COLOR_EVICT_DISABLE (1<<3)
|
|
#define CM0_DEPTH_WRITE_DISABLE (1<<1)
|
|
#define CM0_RC_OP_FLUSH_DISABLE (1<<0)
|
|
|
|
|
|
/* Graphics flush control. A CPU write flushes the GWB of all writes.
|
|
* The data is discarded.
|
|
*/
|
|
#define GFX_FLSH_CNTL 0x2170
|
|
|
|
/* Binner control. Defines the location of the bin pointer list:
|
|
*/
|
|
#define BINCTL 0x2420
|
|
#define BC_MASK (1 << 9)
|
|
|
|
/* Binned scene info.
|
|
*/
|
|
#define BINSCENE 0x2428
|
|
#define BS_OP_LOAD (1 << 8)
|
|
#define BS_MASK (1 << 22)
|
|
|
|
/* Bin command parser debug reg:
|
|
*/
|
|
#define BCPD 0x2480
|
|
|
|
/* Bin memory control debug reg:
|
|
*/
|
|
#define BMCD 0x2484
|
|
|
|
/* Bin data cache debug reg:
|
|
*/
|
|
#define BDCD 0x2488
|
|
|
|
/* Binner pointer cache debug reg:
|
|
*/
|
|
#define BPCD 0x248c
|
|
|
|
/* Binner scratch pad debug reg:
|
|
*/
|
|
#define BINSKPD 0x24f0
|
|
|
|
/* HWB scratch pad debug reg:
|
|
*/
|
|
#define HWBSKPD 0x24f4
|
|
|
|
/* Binner memory pool reg:
|
|
*/
|
|
#define BMP_BUFFER 0x2430
|
|
#define BMP_PAGE_SIZE_4K (0 << 10)
|
|
#define BMP_BUFFER_SIZE_SHIFT 1
|
|
#define BMP_ENABLE (1 << 0)
|
|
|
|
/* Get/put memory from the binner memory pool:
|
|
*/
|
|
#define BMP_GET 0x2438
|
|
#define BMP_PUT 0x2440
|
|
#define BMP_OFFSET_SHIFT 5
|
|
|
|
/* 3D state packets:
|
|
*/
|
|
#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24))
|
|
|
|
#define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19))
|
|
#define SC_UPDATE_SCISSOR (0x1<<1)
|
|
#define SC_ENABLE_MASK (0x1<<0)
|
|
#define SC_ENABLE (0x1<<0)
|
|
|
|
#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16))
|
|
|
|
#define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
|
|
#define SCI_YMIN_MASK (0xffff<<16)
|
|
#define SCI_XMIN_MASK (0xffff<<0)
|
|
#define SCI_YMAX_MASK (0xffff<<16)
|
|
#define SCI_XMAX_MASK (0xffff<<0)
|
|
|
|
#define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19))
|
|
#define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
|
|
#define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
|
|
#define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16))
|
|
#define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4)
|
|
#define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
|
|
#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
|
|
|
|
#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2)
|
|
|
|
#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4)
|
|
#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6)
|
|
#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21)
|
|
#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20)
|
|
#define XY_SRC_COPY_BLT_SRC_TILED (1<<15)
|
|
#define XY_SRC_COPY_BLT_DST_TILED (1<<11)
|
|
|
|
#define MI_BATCH_BUFFER ((0x30<<23)|1)
|
|
#define MI_BATCH_BUFFER_START (0x31<<23)
|
|
#define MI_BATCH_BUFFER_END (0xA<<23)
|
|
#define MI_BATCH_NON_SECURE (1)
|
|
#define MI_BATCH_NON_SECURE_I965 (1<<8)
|
|
|
|
#define MI_WAIT_FOR_EVENT ((0x3<<23))
|
|
#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6)
|
|
#define MI_WAIT_FOR_PLANE_A_FLIP (1<<2)
|
|
#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
|
|
|
|
#define MI_LOAD_SCAN_LINES_INCL ((0x12<<23))
|
|
|
|
#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
|
|
#define ASYNC_FLIP (1<<22)
|
|
#define DISPLAY_PLANE_A (0<<20)
|
|
#define DISPLAY_PLANE_B (1<<20)
|
|
|
|
/* Display regs */
|
|
#define DSPACNTR 0x70180
|
|
#define DSPBCNTR 0x71180
|
|
#define DISPPLANE_SEL_PIPE_MASK (1<<24)
|
|
|
|
/* Define the region of interest for the binner:
|
|
*/
|
|
#define CMD_OP_BIN_CONTROL ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4)
|
|
|
|
#define CMD_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
|
|
|
|
#define CMD_MI_FLUSH (0x04 << 23)
|
|
#define MI_NO_WRITE_FLUSH (1 << 2)
|
|
#define MI_READ_FLUSH (1 << 0)
|
|
#define MI_EXE_FLUSH (1 << 1)
|
|
#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */
|
|
#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */
|
|
|
|
#define BREADCRUMB_BITS 31
|
|
#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1)
|
|
|
|
#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5])
|
|
#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg])
|
|
|
|
#define BLC_PWM_CTL 0x61254
|
|
#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
|
|
|
|
#define BLC_PWM_CTL2 0x61250
|
|
/**
|
|
* This is the most significant 15 bits of the number of backlight cycles in a
|
|
* complete cycle of the modulated backlight control.
|
|
*
|
|
* The actual value is this field multiplied by two.
|
|
*/
|
|
#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
|
|
#define BLM_LEGACY_MODE (1 << 16)
|
|
/**
|
|
* This is the number of cycles out of the backlight modulation cycle for which
|
|
* the backlight is on.
|
|
*
|
|
* This field must be no greater than the number of cycles in the complete
|
|
* backlight modulation cycle.
|
|
*/
|
|
#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
|
|
#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
|
|
|
|
#define I915_GCFGC 0xf0
|
|
#define I915_LOW_FREQUENCY_ENABLE (1 << 7)
|
|
#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
|
|
#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4)
|
|
#define I915_DISPLAY_CLOCK_MASK (7 << 4)
|
|
|
|
#define I855_HPLLCC 0xc0
|
|
#define I855_CLOCK_CONTROL_MASK (3 << 0)
|
|
#define I855_CLOCK_133_200 (0 << 0)
|
|
#define I855_CLOCK_100_200 (1 << 0)
|
|
#define I855_CLOCK_100_133 (2 << 0)
|
|
#define I855_CLOCK_166_250 (3 << 0)
|
|
|
|
/* p317, 319
|
|
*/
|
|
#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */
|
|
#define VCLK2_VCO_N 0x600a
|
|
#define VCLK2_VCO_DIV_SEL 0x6012
|
|
|
|
#define VCLK_DIVISOR_VGA0 0x6000
|
|
#define VCLK_DIVISOR_VGA1 0x6004
|
|
#define VCLK_POST_DIV 0x6010
|
|
/** Selects a post divisor of 4 instead of 2. */
|
|
# define VGA1_PD_P2_DIV_4 (1 << 15)
|
|
/** Overrides the p2 post divisor field */
|
|
# define VGA1_PD_P1_DIV_2 (1 << 13)
|
|
# define VGA1_PD_P1_SHIFT 8
|
|
/** P1 value is 2 greater than this field */
|
|
# define VGA1_PD_P1_MASK (0x1f << 8)
|
|
/** Selects a post divisor of 4 instead of 2. */
|
|
# define VGA0_PD_P2_DIV_4 (1 << 7)
|
|
/** Overrides the p2 post divisor field */
|
|
# define VGA0_PD_P1_DIV_2 (1 << 5)
|
|
# define VGA0_PD_P1_SHIFT 0
|
|
/** P1 value is 2 greater than this field */
|
|
# define VGA0_PD_P1_MASK (0x1f << 0)
|
|
|
|
/* PCI D state control register */
|
|
#define D_STATE 0x6104
|
|
#define DSPCLK_GATE_D 0x6200
|
|
|
|
/* I830 CRTC registers */
|
|
#define HTOTAL_A 0x60000
|
|
#define HBLANK_A 0x60004
|
|
#define HSYNC_A 0x60008
|
|
#define VTOTAL_A 0x6000c
|
|
#define VBLANK_A 0x60010
|
|
#define VSYNC_A 0x60014
|
|
#define PIPEASRC 0x6001c
|
|
#define BCLRPAT_A 0x60020
|
|
#define VSYNCSHIFT_A 0x60028
|
|
|
|
#define HTOTAL_B 0x61000
|
|
#define HBLANK_B 0x61004
|
|
#define HSYNC_B 0x61008
|
|
#define VTOTAL_B 0x6100c
|
|
#define VBLANK_B 0x61010
|
|
#define VSYNC_B 0x61014
|
|
#define PIPEBSRC 0x6101c
|
|
#define BCLRPAT_B 0x61020
|
|
#define VSYNCSHIFT_B 0x61028
|
|
|
|
#define PP_STATUS 0x61200
|
|
# define PP_ON (1 << 31)
|
|
/**
|
|
* Indicates that all dependencies of the panel are on:
|
|
*
|
|
* - PLL enabled
|
|
* - pipe enabled
|
|
* - LVDS/DVOB/DVOC on
|
|
*/
|
|
# define PP_READY (1 << 30)
|
|
# define PP_SEQUENCE_NONE (0 << 28)
|
|
# define PP_SEQUENCE_ON (1 << 28)
|
|
# define PP_SEQUENCE_OFF (2 << 28)
|
|
# define PP_SEQUENCE_MASK 0x30000000
|
|
#define PP_CONTROL 0x61204
|
|
# define POWER_TARGET_ON (1 << 0)
|
|
|
|
#define LVDSPP_ON 0x61208
|
|
#define LVDSPP_OFF 0x6120c
|
|
#define PP_CYCLE 0x61210
|
|
|
|
#define PFIT_CONTROL 0x61230
|
|
# define PFIT_ENABLE (1 << 31)
|
|
# define PFIT_PIPE_MASK (3 << 29)
|
|
# define PFIT_PIPE_SHIFT 29
|
|
# define VERT_INTERP_DISABLE (0 << 10)
|
|
# define VERT_INTERP_BILINEAR (1 << 10)
|
|
# define VERT_INTERP_MASK (3 << 10)
|
|
# define VERT_AUTO_SCALE (1 << 9)
|
|
# define HORIZ_INTERP_DISABLE (0 << 6)
|
|
# define HORIZ_INTERP_BILINEAR (1 << 6)
|
|
# define HORIZ_INTERP_MASK (3 << 6)
|
|
# define HORIZ_AUTO_SCALE (1 << 5)
|
|
# define PANEL_8TO6_DITHER_ENABLE (1 << 3)
|
|
|
|
#define PFIT_PGM_RATIOS 0x61234
|
|
# define PFIT_VERT_SCALE_MASK 0xfff00000
|
|
# define PFIT_HORIZ_SCALE_MASK 0x0000fff0
|
|
|
|
#define PFIT_AUTO_RATIOS 0x61238
|
|
|
|
|
|
#define DPLL_A 0x06014
|
|
#define DPLL_B 0x06018
|
|
# define DPLL_VCO_ENABLE (1 << 31)
|
|
# define DPLL_DVO_HIGH_SPEED (1 << 30)
|
|
# define DPLL_SYNCLOCK_ENABLE (1 << 29)
|
|
# define DPLL_VGA_MODE_DIS (1 << 28)
|
|
# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
|
|
# define DPLLB_MODE_LVDS (2 << 26) /* i915 */
|
|
# define DPLL_MODE_MASK (3 << 26)
|
|
# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
|
|
# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
|
|
# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */
|
|
# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
|
|
# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
|
|
# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
|
|
/**
|
|
* The i830 generation, in DAC/serial mode, defines p1 as two plus this
|
|
* bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
|
|
*/
|
|
# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
|
|
/**
|
|
* The i830 generation, in LVDS mode, defines P1 as the bit number set within
|
|
* this field (only one bit may be set).
|
|
*/
|
|
# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
|
|
# define DPLL_FPA01_P1_POST_DIV_SHIFT 16
|
|
# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */
|
|
# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
|
|
# define PLL_REF_INPUT_DREFCLK (0 << 13)
|
|
# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */
|
|
# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */
|
|
# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
|
|
# define PLL_REF_INPUT_MASK (3 << 13)
|
|
# define PLL_LOAD_PULSE_PHASE_SHIFT 9
|
|
/*
|
|
* Parallel to Serial Load Pulse phase selection.
|
|
* Selects the phase for the 10X DPLL clock for the PCIe
|
|
* digital display port. The range is 4 to 13; 10 or more
|
|
* is just a flip delay. The default is 6
|
|
*/
|
|
# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
|
|
# define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
|
|
|
|
/**
|
|
* SDVO multiplier for 945G/GM. Not used on 965.
|
|
*
|
|
* \sa DPLL_MD_UDI_MULTIPLIER_MASK
|
|
*/
|
|
# define SDVO_MULTIPLIER_MASK 0x000000ff
|
|
# define SDVO_MULTIPLIER_SHIFT_HIRES 4
|
|
# define SDVO_MULTIPLIER_SHIFT_VGA 0
|
|
|
|
/** @defgroup DPLL_MD
|
|
* @{
|
|
*/
|
|
/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
|
|
#define DPLL_A_MD 0x0601c
|
|
/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
|
|
#define DPLL_B_MD 0x06020
|
|
/**
|
|
* UDI pixel divider, controlling how many pixels are stuffed into a packet.
|
|
*
|
|
* Value is pixels minus 1. Must be set to 1 pixel for SDVO.
|
|
*/
|
|
# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
|
|
# define DPLL_MD_UDI_DIVIDER_SHIFT 24
|
|
/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
|
|
# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
|
|
# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
|
|
/**
|
|
* SDVO/UDI pixel multiplier.
|
|
*
|
|
* SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
|
|
* clock rate is 10 times the DPLL clock. At low resolution/refresh rate
|
|
* modes, the bus rate would be below the limits, so SDVO allows for stuffing
|
|
* dummy bytes in the datastream at an increased clock rate, with both sides of
|
|
* the link knowing how many bytes are fill.
|
|
*
|
|
* So, for a mode with a dotclock of 65Mhz, we would want to double the clock
|
|
* rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be
|
|
* set to 130Mhz, and the SDVO multiplier set to 2x in this register and
|
|
* through an SDVO command.
|
|
*
|
|
* This register field has values of multiplication factor minus 1, with
|
|
* a maximum multiplier of 5 for SDVO.
|
|
*/
|
|
# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
|
|
# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
|
|
/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
|
|
* This best be set to the default value (3) or the CRT won't work. No,
|
|
* I don't entirely understand what this does...
|
|
*/
|
|
# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
|
|
# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
|
|
/** @} */
|
|
|
|
#define DPLL_TEST 0x606c
|
|
# define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
|
|
# define DPLLB_TEST_SDVO_DIV_2 (1 << 22)
|
|
# define DPLLB_TEST_SDVO_DIV_4 (2 << 22)
|
|
# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22)
|
|
# define DPLLB_TEST_N_BYPASS (1 << 19)
|
|
# define DPLLB_TEST_M_BYPASS (1 << 18)
|
|
# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16)
|
|
# define DPLLA_TEST_N_BYPASS (1 << 3)
|
|
# define DPLLA_TEST_M_BYPASS (1 << 2)
|
|
# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
|
|
|
|
#define ADPA 0x61100
|
|
#define ADPA_DAC_ENABLE (1<<31)
|
|
#define ADPA_DAC_DISABLE 0
|
|
#define ADPA_PIPE_SELECT_MASK (1<<30)
|
|
#define ADPA_PIPE_A_SELECT 0
|
|
#define ADPA_PIPE_B_SELECT (1<<30)
|
|
#define ADPA_USE_VGA_HVPOLARITY (1<<15)
|
|
#define ADPA_SETS_HVPOLARITY 0
|
|
#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
|
|
#define ADPA_VSYNC_CNTL_ENABLE 0
|
|
#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
|
|
#define ADPA_HSYNC_CNTL_ENABLE 0
|
|
#define ADPA_VSYNC_ACTIVE_HIGH (1<<4)
|
|
#define ADPA_VSYNC_ACTIVE_LOW 0
|
|
#define ADPA_HSYNC_ACTIVE_HIGH (1<<3)
|
|
#define ADPA_HSYNC_ACTIVE_LOW 0
|
|
|
|
#define FPA0 0x06040
|
|
#define FPA1 0x06044
|
|
#define FPB0 0x06048
|
|
#define FPB1 0x0604c
|
|
# define FP_N_DIV_MASK 0x003f0000
|
|
# define FP_N_DIV_SHIFT 16
|
|
# define FP_M1_DIV_MASK 0x00003f00
|
|
# define FP_M1_DIV_SHIFT 8
|
|
# define FP_M2_DIV_MASK 0x0000003f
|
|
# define FP_M2_DIV_SHIFT 0
|
|
|
|
|
|
#define PORT_HOTPLUG_EN 0x61110
|
|
# define SDVOB_HOTPLUG_INT_EN (1 << 26)
|
|
# define SDVOC_HOTPLUG_INT_EN (1 << 25)
|
|
# define TV_HOTPLUG_INT_EN (1 << 18)
|
|
# define CRT_HOTPLUG_INT_EN (1 << 9)
|
|
# define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
|
|
|
|
#define PORT_HOTPLUG_STAT 0x61114
|
|
# define CRT_HOTPLUG_INT_STATUS (1 << 11)
|
|
# define TV_HOTPLUG_INT_STATUS (1 << 10)
|
|
# define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
|
|
# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
|
|
# define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
|
|
# define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
|
|
# define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
|
|
# define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
|
|
|
|
#define SDVOB 0x61140
|
|
#define SDVOC 0x61160
|
|
#define SDVO_ENABLE (1 << 31)
|
|
#define SDVO_PIPE_B_SELECT (1 << 30)
|
|
#define SDVO_STALL_SELECT (1 << 29)
|
|
#define SDVO_INTERRUPT_ENABLE (1 << 26)
|
|
/**
|
|
* 915G/GM SDVO pixel multiplier.
|
|
*
|
|
* Programmed value is multiplier - 1, up to 5x.
|
|
*
|
|
* \sa DPLL_MD_UDI_MULTIPLIER_MASK
|
|
*/
|
|
#define SDVO_PORT_MULTIPLY_MASK (7 << 23)
|
|
#define SDVO_PORT_MULTIPLY_SHIFT 23
|
|
#define SDVO_PHASE_SELECT_MASK (15 << 19)
|
|
#define SDVO_PHASE_SELECT_DEFAULT (6 << 19)
|
|
#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18)
|
|
#define SDVOC_GANG_MODE (1 << 16)
|
|
#define SDVO_BORDER_ENABLE (1 << 7)
|
|
#define SDVOB_PCIE_CONCURRENCY (1 << 3)
|
|
#define SDVO_DETECTED (1 << 2)
|
|
/* Bits to be preserved when writing */
|
|
#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14))
|
|
#define SDVOC_PRESERVE_MASK (1 << 17)
|
|
|
|
/** @defgroup LVDS
|
|
* @{
|
|
*/
|
|
/**
|
|
* This register controls the LVDS output enable, pipe selection, and data
|
|
* format selection.
|
|
*
|
|
* All of the clock/data pairs are force powered down by power sequencing.
|
|
*/
|
|
#define LVDS 0x61180
|
|
/**
|
|
* Enables the LVDS port. This bit must be set before DPLLs are enabled, as
|
|
* the DPLL semantics change when the LVDS is assigned to that pipe.
|
|
*/
|
|
# define LVDS_PORT_EN (1 << 31)
|
|
/** Selects pipe B for LVDS data. Must be set on pre-965. */
|
|
# define LVDS_PIPEB_SELECT (1 << 30)
|
|
|
|
/**
|
|
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
|
|
* pixel.
|
|
*/
|
|
# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
|
|
# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
|
|
# define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
|
|
/**
|
|
* Controls the A3 data pair, which contains the additional LSBs for 24 bit
|
|
* mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
|
|
* on.
|
|
*/
|
|
# define LVDS_A3_POWER_MASK (3 << 6)
|
|
# define LVDS_A3_POWER_DOWN (0 << 6)
|
|
# define LVDS_A3_POWER_UP (3 << 6)
|
|
/**
|
|
* Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
|
|
* is set.
|
|
*/
|
|
# define LVDS_CLKB_POWER_MASK (3 << 4)
|
|
# define LVDS_CLKB_POWER_DOWN (0 << 4)
|
|
# define LVDS_CLKB_POWER_UP (3 << 4)
|
|
|
|
/**
|
|
* Controls the B0-B3 data pairs. This must be set to match the DPLL p2
|
|
* setting for whether we are in dual-channel mode. The B3 pair will
|
|
* additionally only be powered up when LVDS_A3_POWER_UP is set.
|
|
*/
|
|
# define LVDS_B0B3_POWER_MASK (3 << 2)
|
|
# define LVDS_B0B3_POWER_DOWN (0 << 2)
|
|
# define LVDS_B0B3_POWER_UP (3 << 2)
|
|
|
|
#define PIPEACONF 0x70008
|
|
#define PIPEACONF_ENABLE (1<<31)
|
|
#define PIPEACONF_DISABLE 0
|
|
#define PIPEACONF_DOUBLE_WIDE (1<<30)
|
|
#define I965_PIPECONF_ACTIVE (1<<30)
|
|
#define PIPEACONF_SINGLE_WIDE 0
|
|
#define PIPEACONF_PIPE_UNLOCKED 0
|
|
#define PIPEACONF_PIPE_LOCKED (1<<25)
|
|
#define PIPEACONF_PALETTE 0
|
|
#define PIPEACONF_GAMMA (1<<24)
|
|
#define PIPECONF_FORCE_BORDER (1<<25)
|
|
#define PIPECONF_PROGRESSIVE (0 << 21)
|
|
#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
|
|
#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
|
|
|
|
#define DSPARB 0x70030
|
|
#define DSPARB_CSTART_MASK (0x7f << 7)
|
|
#define DSPARB_CSTART_SHIFT 7
|
|
#define DSPARB_BSTART_MASK (0x7f)
|
|
#define DSPARB_BSTART_SHIFT 0
|
|
|
|
#define PIPEBCONF 0x71008
|
|
#define PIPEBCONF_ENABLE (1<<31)
|
|
#define PIPEBCONF_DISABLE 0
|
|
#define PIPEBCONF_DOUBLE_WIDE (1<<30)
|
|
#define PIPEBCONF_DISABLE 0
|
|
#define PIPEBCONF_GAMMA (1<<24)
|
|
#define PIPEBCONF_PALETTE 0
|
|
|
|
#define PIPEBGCMAXRED 0x71010
|
|
#define PIPEBGCMAXGREEN 0x71014
|
|
#define PIPEBGCMAXBLUE 0x71018
|
|
#define PIPEBSTAT 0x71024
|
|
#define PIPEBFRAMEHIGH 0x71040
|
|
#define PIPEBFRAMEPIXEL 0x71044
|
|
|
|
#define DSPACNTR 0x70180
|
|
#define DSPBCNTR 0x71180
|
|
#define DISPLAY_PLANE_ENABLE (1<<31)
|
|
#define DISPLAY_PLANE_DISABLE 0
|
|
#define DISPPLANE_GAMMA_ENABLE (1<<30)
|
|
#define DISPPLANE_GAMMA_DISABLE 0
|
|
#define DISPPLANE_PIXFORMAT_MASK (0xf<<26)
|
|
#define DISPPLANE_8BPP (0x2<<26)
|
|
#define DISPPLANE_15_16BPP (0x4<<26)
|
|
#define DISPPLANE_16BPP (0x5<<26)
|
|
#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
|
|
#define DISPPLANE_32BPP (0x7<<26)
|
|
#define DISPPLANE_STEREO_ENABLE (1<<25)
|
|
#define DISPPLANE_STEREO_DISABLE 0
|
|
#define DISPPLANE_SEL_PIPE_MASK (1<<24)
|
|
#define DISPPLANE_SEL_PIPE_A 0
|
|
#define DISPPLANE_SEL_PIPE_B (1<<24)
|
|
#define DISPPLANE_SRC_KEY_ENABLE (1<<22)
|
|
#define DISPPLANE_SRC_KEY_DISABLE 0
|
|
#define DISPPLANE_LINE_DOUBLE (1<<20)
|
|
#define DISPPLANE_NO_LINE_DOUBLE 0
|
|
#define DISPPLANE_STEREO_POLARITY_FIRST 0
|
|
#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
|
|
/* plane B only */
|
|
#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15)
|
|
#define DISPPLANE_ALPHA_TRANS_DISABLE 0
|
|
#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0
|
|
#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1)
|
|
|
|
#define DSPABASE 0x70184
|
|
#define DSPASTRIDE 0x70188
|
|
|
|
#define DSPBBASE 0x71184
|
|
#define DSPBADDR DSPBBASE
|
|
#define DSPBSTRIDE 0x71188
|
|
|
|
#define DSPAKEYVAL 0x70194
|
|
#define DSPAKEYMASK 0x70198
|
|
|
|
#define DSPAPOS 0x7018C /* reserved */
|
|
#define DSPASIZE 0x70190
|
|
#define DSPBPOS 0x7118C
|
|
#define DSPBSIZE 0x71190
|
|
|
|
#define DSPASURF 0x7019C
|
|
#define DSPATILEOFF 0x701A4
|
|
|
|
#define DSPBSURF 0x7119C
|
|
#define DSPBTILEOFF 0x711A4
|
|
|
|
#define VGACNTRL 0x71400
|
|
# define VGA_DISP_DISABLE (1 << 31)
|
|
# define VGA_2X_MODE (1 << 30)
|
|
# define VGA_PIPE_B_SELECT (1 << 29)
|
|
|
|
/*
|
|
* Some BIOS scratch area registers. The 845 (and 830?) store the amount
|
|
* of video memory available to the BIOS in SWF1.
|
|
*/
|
|
|
|
#define SWF0 0x71410
|
|
|
|
/*
|
|
* 855 scratch registers.
|
|
*/
|
|
#define SWF10 0x70410
|
|
|
|
#define SWF30 0x72414
|
|
|
|
/*
|
|
* Overlay registers. These are overlay registers accessed via MMIO.
|
|
* Those loaded via the overlay register page are defined in i830_video.c.
|
|
*/
|
|
#define OVADD 0x30000
|
|
|
|
#define DOVSTA 0x30008
|
|
#define OC_BUF (0x3<<20)
|
|
|
|
#define OGAMC5 0x30010
|
|
#define OGAMC4 0x30014
|
|
#define OGAMC3 0x30018
|
|
#define OGAMC2 0x3001c
|
|
#define OGAMC1 0x30020
|
|
#define OGAMC0 0x30024
|
|
/*
|
|
* Palette registers
|
|
*/
|
|
#define PALETTE_A 0x0a000
|
|
#define PALETTE_B 0x0a800
|
|
|
|
#define IS_I830(dev) ((dev)->pci_device == 0x3577)
|
|
#define IS_845G(dev) ((dev)->pci_device == 0x2562)
|
|
#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
|
|
#define IS_I855(dev) ((dev)->pci_device == 0x3582)
|
|
#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
|
|
|
|
#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
|
|
#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
|
|
#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
|
|
#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
|
|
(dev)->pci_device == 0x27AE)
|
|
#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
|
|
(dev)->pci_device == 0x2982 || \
|
|
(dev)->pci_device == 0x2992 || \
|
|
(dev)->pci_device == 0x29A2 || \
|
|
(dev)->pci_device == 0x2A02 || \
|
|
(dev)->pci_device == 0x2A12 || \
|
|
(dev)->pci_device == 0x2A42)
|
|
|
|
#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
|
|
|
|
#define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42)
|
|
|
|
#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
|
|
(dev)->pci_device == 0x29B2 || \
|
|
(dev)->pci_device == 0x29D2)
|
|
|
|
#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
|
|
IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev))
|
|
|
|
#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
|
|
IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev))
|
|
|
|
#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev))
|
|
|
|
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
|
|
|
|
#endif
|