lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
7f999aa726
android_kernel_xiaomi_sm8350/arch/sh/drivers/pci/pci-auto.c
Paul Mundt 959f85f8a3 sh: Consolidated SH7751/SH7780 PCI support. 
This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:43:28 +09:00

542 lines
16 KiB
C
Raw Blame History

/*
* PCI autoconfiguration library
*
* Author: Matt Porter <mporter@mvista.com>
*
* Copyright 2000, 2001 MontaVista Software Inc.
* Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
* Copyright 2003 Paul Mundt <lethal@linux-sh.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/*
* Modified for MIPS by Jun Sun, jsun@mvista.com
*
* . Simplify the interface between pci_auto and the rest: a single function.
* . Assign resources from low address to upper address.
* . change most int to u32.
*
* Further modified to include it as mips generic code, ppopov@mvista.com.
*
* 2001-10-26 Bradley D. LaRonde <brad@ltc.com>
* - Add a top_bus argument to the "early config" functions so that
* they can set a fake parent bus pointer to convince the underlying
* pci ops to use type 1 configuration for sub busses.
* - Set bridge base and limit registers correctly.
* - Align io and memory base properly before and after bridge setup.
* - Don't fall through to pci_setup_bars for bridge.
* - Reformat the debug output to look more like lspci's output.
*
* Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org
*
* 2003-08-05 Paul Mundt <lethal@linux-sh.org>
* - Don't update the BAR values on systems that already have valid addresses
* and don't want these updated for whatever reason, by way of a new config
* option check. However, we still read in the old BAR values so that they
* can still be reported through the debug output.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#define DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
/*
* These functions are used early on before PCI scanning is done
* and all of the pci_dev and pci_bus structures have been created.
*/
static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
int top_bus, int busnr, int devfn)
{
static struct pci_dev dev;
static struct pci_bus bus;
dev.bus = &bus;
dev.sysdata = hose;
dev.devfn = devfn;
bus.number = busnr;
bus.ops = hose->pci_ops;
if(busnr != top_bus)
/* Fake a parent bus structure. */
bus.parent = &bus;
else
bus.parent = NULL;
return &dev;
}
#define EARLY_PCI_OP(rw, size, type) \
int early_##rw##_config_##size(struct pci_channel *hose, \
int top_bus, int bus, int devfn, int offset, type value) \
{ \
return pci_##rw##_config_##size( \
fake_pci_dev(hose, top_bus, bus, devfn), \
offset, value); \
}
EARLY_PCI_OP(read, byte, u8 *)
EARLY_PCI_OP(read, word, u16 *)
EARLY_PCI_OP(read, dword, u32 *)
EARLY_PCI_OP(write, byte, u8)
EARLY_PCI_OP(write, word, u16)
EARLY_PCI_OP(write, dword, u32)
static struct resource *io_resource_inuse;
static struct resource *mem_resource_inuse;
static u32 pciauto_lower_iospc;
static u32 pciauto_upper_iospc;
static u32 pciauto_lower_memspc;
static u32 pciauto_upper_memspc;
static void __init
pciauto_setup_bars(struct pci_channel *hose,
int top_bus,
int current_bus,
int pci_devfn,
int bar_limit)
{
u32 bar_response, bar_size, bar_value;
u32 bar, addr_mask, bar_nr = 0;
u32 * upper_limit;
u32 * lower_limit;
int found_mem64 = 0;
for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
u32 bar_addr;
/* Read the old BAR value */
early_read_config_dword(hose, top_bus,
current_bus,
pci_devfn,
bar,
&bar_addr);
/* Tickle the BAR and get the response */
early_write_config_dword(hose, top_bus,
current_bus,
pci_devfn,
bar,
0xffffffff);
early_read_config_dword(hose, top_bus,
current_bus,
pci_devfn,
bar,
&bar_response);
/*
* Write the old BAR value back out, only update the BAR
* if we implicitly want resources to be updated, which
* is done by the generic code further down. -- PFM.
*/
early_write_config_dword(hose, top_bus,
current_bus,
pci_devfn,
bar,
bar_addr);
/* If BAR is not implemented go to the next BAR */
if (!bar_response)
continue;
/*
* Workaround for a BAR that doesn't use its upper word,
* like the ALi 1535D+ PCI DC-97 Controller Modem (M5457).
* bdl <brad@ltc.com>
*/
if (!(bar_response & 0xffff0000))
bar_response |= 0xffff0000;
retry:
/* Check the BAR type and set our address mask */
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
addr_mask = PCI_BASE_ADDRESS_IO_MASK;
upper_limit = &pciauto_upper_iospc;
lower_limit = &pciauto_lower_iospc;
DBG(" I/O");
} else {
if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
PCI_BASE_ADDRESS_MEM_TYPE_64)
found_mem64 = 1;
addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
upper_limit = &pciauto_upper_memspc;
lower_limit = &pciauto_lower_memspc;
DBG(" Mem");
}
/* Calculate requested size */
bar_size = ~(bar_response & addr_mask) + 1;
/* Allocate a base address */
bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
if ((bar_value + bar_size) > *upper_limit) {
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
if (io_resource_inuse->child) {
io_resource_inuse =
io_resource_inuse->child;
pciauto_lower_iospc =
io_resource_inuse->start;
pciauto_upper_iospc =
io_resource_inuse->end + 1;
goto retry;
}
} else {
if (mem_resource_inuse->child) {
mem_resource_inuse =
mem_resource_inuse->child;
pciauto_lower_memspc =
mem_resource_inuse->start;
pciauto_upper_memspc =
mem_resource_inuse->end + 1;
goto retry;
}
}
DBG(" unavailable -- skipping, value %x size %x\n",
bar_value, bar_size);
continue;
}
#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES
/* Write it out and update our limit */
early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
bar, bar_value);
#endif
*lower_limit = bar_value + bar_size;
/*
* If we are a 64-bit decoder then increment to the
* upper 32 bits of the bar and force it to locate
* in the lower 4GB of memory.
*/
if (found_mem64) {
bar += 4;
early_write_config_dword(hose, top_bus,
current_bus,
pci_devfn,
bar,
0x00000000);
}
DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size);
bar_nr++;
}
}
static void __init
pciauto_prescan_setup_bridge(struct pci_channel *hose,
int top_bus,
int current_bus,
int pci_devfn,
int sub_bus)
{
/* Configure bus number registers */
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_PRIMARY_BUS, current_bus);
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_SECONDARY_BUS, sub_bus + 1);
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_SUBORDINATE_BUS, 0xff);
/* Align memory and I/O to 1MB and 4KB boundaries. */
pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
& ~(0x100000 - 1);
pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
& ~(0x1000 - 1);
/* Set base (lower limit) of address range behind bridge. */
early_write_config_word(hose, top_bus, current_bus, pci_devfn,
PCI_MEMORY_BASE, pciauto_lower_memspc >> 16);
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8);
early_write_config_word(hose, top_bus, current_bus, pci_devfn,
PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16);
/* We don't support prefetchable memory for now, so disable */
early_write_config_word(hose, top_bus, current_bus, pci_devfn,
PCI_PREF_MEMORY_BASE, 0);
early_write_config_word(hose, top_bus, current_bus, pci_devfn,
PCI_PREF_MEMORY_LIMIT, 0);
}
static void __init
pciauto_postscan_setup_bridge(struct pci_channel *hose,
int top_bus,
int current_bus,
int pci_devfn,
int sub_bus)
{
u32 temp;
/*
* [jsun] we always bump up baselines a little, so that if there
* nothing behind P2P bridge, we don't wind up overlapping IO/MEM
* spaces.
*/
pciauto_lower_memspc += 1;
pciauto_lower_iospc += 1;
/* Configure bus number registers */
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_SUBORDINATE_BUS, sub_bus);
/* Set upper limit of address range behind bridge. */
early_write_config_word(hose, top_bus, current_bus, pci_devfn,
PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16);
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8);
early_write_config_word(hose, top_bus, current_bus, pci_devfn,
PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16);
/* Align memory and I/O to 1MB and 4KB boundaries. */
pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
& ~(0x100000 - 1);
pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
& ~(0x1000 - 1);
/* Enable memory and I/O accesses, enable bus master */
early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_COMMAND, &temp);
early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY
| PCI_COMMAND_MASTER);
}
static void __init
pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose,
int top_bus,
int current_bus,
int pci_devfn,
int sub_bus)
{
/* Configure bus number registers */
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_PRIMARY_BUS, current_bus);
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_SECONDARY_BUS, sub_bus + 1);
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_SUBORDINATE_BUS, 0xff);
/* Align memory and I/O to 4KB and 4 byte boundaries. */
pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
& ~(0x1000 - 1);
pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
& ~(0x4 - 1);
early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc);
early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_CB_IO_BASE_0, pciauto_lower_iospc);
}
static void __init
pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
int top_bus,
int current_bus,
int pci_devfn,
int sub_bus)
{
u32 temp;
/*
* [jsun] we always bump up baselines a little, so that if there
* nothing behind P2P bridge, we don't wind up overlapping IO/MEM
* spaces.
*/
pciauto_lower_memspc += 1;
pciauto_lower_iospc += 1;
/*
* Configure subordinate bus number. The PCI subsystem
* bus scan will renumber buses (reserving three additional
* for this PCI<->CardBus bridge for the case where a CardBus
* adapter contains a P2P or CB2CB bridge.
*/
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_SUBORDINATE_BUS, sub_bus);
/*
* Reserve an additional 4MB for mem space and 16KB for
* I/O space. This should cover any additional space
* requirement of unusual CardBus devices with
* additional bridges that can consume more address space.
*
* Although pcmcia-cs currently will reprogram bridge
* windows, the goal is to add an option to leave them
* alone and use the bridge window ranges as the regions
* that are searched for free resources upon hot-insertion
* of a device. This will allow a PCI<->CardBus bridge
* configured by this routine to happily live behind a
* P2P bridge in a system.
*/
/* Align memory and I/O to 4KB and 4 byte boundaries. */
pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
& ~(0x1000 - 1);
pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
& ~(0x4 - 1);
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1);
early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1);
/* Enable memory and I/O accesses, enable bus master */
early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_COMMAND, &temp);
early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER);
}
#define PCIAUTO_IDE_MODE_MASK 0x05
static int __init
pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
{
int sub_bus;
u32 pci_devfn, pci_class, cmdstat, found_multi=0;
unsigned short vid, did;
unsigned char header_type;
int devfn_start = 0;
int devfn_stop = 0xff;
sub_bus = current_bus;
if (hose->first_devfn)
devfn_start = hose->first_devfn;
if (hose->last_devfn)
devfn_stop = hose->last_devfn;
for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
if (PCI_FUNC(pci_devfn) && !found_multi)
continue;
early_read_config_word(hose, top_bus, current_bus, pci_devfn,
PCI_VENDOR_ID, &vid);
if (vid == 0xffff) continue;
early_read_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_HEADER_TYPE, &header_type);
if (!PCI_FUNC(pci_devfn))
found_multi = header_type & 0x80;
early_read_config_word(hose, top_bus, current_bus, pci_devfn,
PCI_DEVICE_ID, &did);
early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_CLASS_REVISION, &pci_class);
DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x",
current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn),
pci_class >> 16, vid, did);
if (pci_class & 0xff)
DBG(" (rev %.2x)", pci_class & 0xff);
DBG("\n");
if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
DBG(" Bridge: primary=%.2x, secondary=%.2x\n",
current_bus, sub_bus + 1);
pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
pci_devfn, sub_bus);
DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
sub_bus + 1,
pciauto_lower_iospc, pciauto_lower_memspc);
sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
DBG("Back to bus %.2x\n", current_bus);
pciauto_postscan_setup_bridge(hose, top_bus, current_bus,
pci_devfn, sub_bus);
continue;
} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n",
current_bus, sub_bus + 1);
DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
/* Place CardBus Socket/ExCA registers */
pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
current_bus, pci_devfn, sub_bus);
DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
sub_bus + 1,
pciauto_lower_iospc, pciauto_lower_memspc);
sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus);
pciauto_postscan_setup_cardbus_bridge(hose, top_bus,
current_bus, pci_devfn, sub_bus);
continue;
} else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
unsigned char prg_iface;
early_read_config_byte(hose, top_bus, current_bus,
pci_devfn, PCI_CLASS_PROG, &prg_iface);
if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
DBG("Skipping legacy mode IDE controller\n");
continue;
}
}
/*
* Found a peripheral, enable some standard
* settings
*/
early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_COMMAND, &cmdstat);
early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER);
#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_LATENCY_TIMER, 0x80);
#endif
/* Allocate PCI I/O and/or memory space */
pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
}
return sub_bus;
}
int __init
pciauto_assign_resources(int busno, struct pci_channel *hose)
{
/* setup resource limits */
io_resource_inuse = hose->io_resource;
mem_resource_inuse = hose->mem_resource;
pciauto_lower_iospc = io_resource_inuse->start;
pciauto_upper_iospc = io_resource_inuse->end + 1;
pciauto_lower_memspc = mem_resource_inuse->start;
pciauto_upper_memspc = mem_resource_inuse->end + 1;
DBG("Autoconfig PCI channel 0x%p\n", hose);
DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n",
busno, pciauto_lower_iospc, pciauto_upper_iospc,
pciauto_lower_memspc, pciauto_upper_memspc);
return pciauto_bus_scan(hose, busno, busno);
}
Reference in New Issue View Git Blame Copy Permalink