lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
7fdfc90945
android_kernel_xiaomi_sm8350/drivers/input/joystick/warrior.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

234 lines
6.2 KiB
C
Raw Blame History

/*
* $Id: warrior.c,v 1.14 2002/01/22 20:32:10 vojtech Exp $
*
* Copyright (c) 1999-2001 Vojtech Pavlik
*/
/*
* Logitech WingMan Warrior joystick driver for Linux
*/
/*
* This program is free warftware; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Logitech WingMan Warrior joystick driver"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* Constants.
*/
#define WARRIOR_MAX_LENGTH 16
static char warrior_lengths[] = { 0, 4, 12, 3, 4, 4, 0, 0 };
/*
* Per-Warrior data.
*/
struct warrior {
struct input_dev *dev;
int idx, len;
unsigned char data[WARRIOR_MAX_LENGTH];
char phys[32];
};
/*
* warrior_process_packet() decodes packets the driver receives from the
* Warrior. It updates the data accordingly.
*/
static void warrior_process_packet(struct warrior *warrior)
{
struct input_dev *dev = warrior->dev;
unsigned char *data = warrior->data;
if (!warrior->idx) return;
switch ((data[0] >> 4) & 7) {
case 1: /* Button data */
input_report_key(dev, BTN_TRIGGER, data[3] & 1);
input_report_key(dev, BTN_THUMB, (data[3] >> 1) & 1);
input_report_key(dev, BTN_TOP, (data[3] >> 2) & 1);
input_report_key(dev, BTN_TOP2, (data[3] >> 3) & 1);
break;
case 3: /* XY-axis info->data */
input_report_abs(dev, ABS_X, ((data[0] & 8) << 5) - (data[2] | ((data[0] & 4) << 5)));
input_report_abs(dev, ABS_Y, (data[1] | ((data[0] & 1) << 7)) - ((data[0] & 2) << 7));
break;
case 5: /* Throttle, spinner, hat info->data */
input_report_abs(dev, ABS_THROTTLE, (data[1] | ((data[0] & 1) << 7)) - ((data[0] & 2) << 7));
input_report_abs(dev, ABS_HAT0X, (data[3] & 2 ? 1 : 0) - (data[3] & 1 ? 1 : 0));
input_report_abs(dev, ABS_HAT0Y, (data[3] & 8 ? 1 : 0) - (data[3] & 4 ? 1 : 0));
input_report_rel(dev, REL_DIAL, (data[2] | ((data[0] & 4) << 5)) - ((data[0] & 8) << 5));
break;
}
input_sync(dev);
}
/*
* warrior_interrupt() is called by the low level driver when characters
* are ready for us. We then buffer them for further processing, or call the
* packet processing routine.
*/
static irqreturn_t warrior_interrupt(struct serio *serio,
unsigned char data, unsigned int flags)
{
struct warrior *warrior = serio_get_drvdata(serio);
if (data & 0x80) {
if (warrior->idx) warrior_process_packet(warrior);
warrior->idx = 0;
warrior->len = warrior_lengths[(data >> 4) & 7];
}
if (warrior->idx < warrior->len)
warrior->data[warrior->idx++] = data;
if (warrior->idx == warrior->len) {
if (warrior->idx) warrior_process_packet(warrior);
warrior->idx = 0;
warrior->len = 0;
}
return IRQ_HANDLED;
}
/*
* warrior_disconnect() is the opposite of warrior_connect()
*/
static void warrior_disconnect(struct serio *serio)
{
struct warrior *warrior = serio_get_drvdata(serio);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_unregister_device(warrior->dev);
kfree(warrior);
}
/*
* warrior_connect() is the routine that is called when someone adds a
* new serio device. It looks for the Warrior, and if found, registers
* it as an input device.
*/
static int warrior_connect(struct serio *serio, struct serio_driver *drv)
{
struct warrior *warrior;
struct input_dev *input_dev;
int err = -ENOMEM;
warrior = kzalloc(sizeof(struct warrior), GFP_KERNEL);
input_dev = input_allocate_device();
if (!warrior || !input_dev)
goto fail;
warrior->dev = input_dev;
snprintf(warrior->phys, sizeof(warrior->phys), "%s/input0", serio->phys);
input_dev->name = "Logitech WingMan Warrior";
input_dev->phys = warrior->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_WARRIOR;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
input_dev->cdev.dev = &serio->dev;
input_dev->private = warrior;
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
input_dev->keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2);
input_dev->relbit[0] = BIT(REL_DIAL);
input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 8);
input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 8);
input_set_abs_params(input_dev, ABS_THROTTLE, -112, 112, 0, 0);
input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
input_set_abs_params(input_dev, ABS_HAT0Y, -1, 1, 0, 0);
serio_set_drvdata(serio, warrior);
err = serio_open(serio, drv);
if (err)
goto fail;
input_register_device(warrior->dev);
return 0;
fail: serio_set_drvdata(serio, NULL);
input_free_device(input_dev);
kfree(warrior);
return err;
}
/*
* The serio driver structure.
*/
static struct serio_device_id warrior_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_WARRIOR,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, warrior_serio_ids);
static struct serio_driver warrior_drv = {
.driver = {
.name = "warrior",
},
.description = DRIVER_DESC,
.id_table = warrior_serio_ids,
.interrupt = warrior_interrupt,
.connect = warrior_connect,
.disconnect = warrior_disconnect,
};
/*
* The functions for inserting/removing us as a module.
*/
static int __init warrior_init(void)
{
serio_register_driver(&warrior_drv);
return 0;
}
static void __exit warrior_exit(void)
{
serio_unregister_driver(&warrior_drv);
}
module_init(warrior_init);
module_exit(warrior_exit);
Reference in New Issue View Git Blame Copy Permalink