4159 lines
98 KiB
C
4159 lines
98 KiB
C
/*
|
|
* Intel IO-APIC support for multi-Pentium hosts.
|
|
*
|
|
* Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
|
|
*
|
|
* Many thanks to Stig Venaas for trying out countless experimental
|
|
* patches and reporting/debugging problems patiently!
|
|
*
|
|
* (c) 1999, Multiple IO-APIC support, developed by
|
|
* Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
|
|
* Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
|
|
* further tested and cleaned up by Zach Brown <zab@redhat.com>
|
|
* and Ingo Molnar <mingo@redhat.com>
|
|
*
|
|
* Fixes
|
|
* Maciej W. Rozycki : Bits for genuine 82489DX APICs;
|
|
* thanks to Eric Gilmore
|
|
* and Rolf G. Tews
|
|
* for testing these extensively
|
|
* Paul Diefenbaugh : Added full ACPI support
|
|
*/
|
|
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/mc146818rtc.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/htirq.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/jiffies.h> /* time_after() */
|
|
#ifdef CONFIG_ACPI
|
|
#include <acpi/acpi_bus.h>
|
|
#endif
|
|
#include <linux/bootmem.h>
|
|
#include <linux/dmar.h>
|
|
#include <linux/hpet.h>
|
|
|
|
#include <asm/idle.h>
|
|
#include <asm/io.h>
|
|
#include <asm/smp.h>
|
|
#include <asm/desc.h>
|
|
#include <asm/proto.h>
|
|
#include <asm/acpi.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/timer.h>
|
|
#include <asm/i8259.h>
|
|
#include <asm/nmi.h>
|
|
#include <asm/msidef.h>
|
|
#include <asm/hypertransport.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/irq_remapping.h>
|
|
#include <asm/hpet.h>
|
|
#include <asm/uv/uv_hub.h>
|
|
#include <asm/uv/uv_irq.h>
|
|
|
|
#include <mach_ipi.h>
|
|
#include <mach_apic.h>
|
|
#include <mach_apicdef.h>
|
|
|
|
#define __apicdebuginit(type) static type __init
|
|
|
|
/*
|
|
* Is the SiS APIC rmw bug present ?
|
|
* -1 = don't know, 0 = no, 1 = yes
|
|
*/
|
|
int sis_apic_bug = -1;
|
|
|
|
static DEFINE_SPINLOCK(ioapic_lock);
|
|
static DEFINE_SPINLOCK(vector_lock);
|
|
|
|
/*
|
|
* # of IRQ routing registers
|
|
*/
|
|
int nr_ioapic_registers[MAX_IO_APICS];
|
|
|
|
/* I/O APIC entries */
|
|
struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
|
|
int nr_ioapics;
|
|
|
|
/* MP IRQ source entries */
|
|
struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
|
|
|
|
/* # of MP IRQ source entries */
|
|
int mp_irq_entries;
|
|
|
|
#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
|
|
int mp_bus_id_to_type[MAX_MP_BUSSES];
|
|
#endif
|
|
|
|
DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
|
|
|
|
int skip_ioapic_setup;
|
|
|
|
static int __init parse_noapic(char *str)
|
|
{
|
|
/* disable IO-APIC */
|
|
disable_ioapic_setup();
|
|
return 0;
|
|
}
|
|
early_param("noapic", parse_noapic);
|
|
|
|
struct irq_pin_list;
|
|
|
|
/*
|
|
* This is performance-critical, we want to do it O(1)
|
|
*
|
|
* the indexing order of this array favors 1:1 mappings
|
|
* between pins and IRQs.
|
|
*/
|
|
|
|
struct irq_pin_list {
|
|
int apic, pin;
|
|
struct irq_pin_list *next;
|
|
};
|
|
|
|
static struct irq_pin_list *get_one_free_irq_2_pin(int cpu)
|
|
{
|
|
struct irq_pin_list *pin;
|
|
int node;
|
|
|
|
node = cpu_to_node(cpu);
|
|
|
|
pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node);
|
|
|
|
return pin;
|
|
}
|
|
|
|
struct irq_cfg {
|
|
struct irq_pin_list *irq_2_pin;
|
|
cpumask_var_t domain;
|
|
cpumask_var_t old_domain;
|
|
unsigned move_cleanup_count;
|
|
u8 vector;
|
|
u8 move_in_progress : 1;
|
|
#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
|
|
u8 move_desc_pending : 1;
|
|
#endif
|
|
};
|
|
|
|
/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
|
|
#ifdef CONFIG_SPARSE_IRQ
|
|
static struct irq_cfg irq_cfgx[] = {
|
|
#else
|
|
static struct irq_cfg irq_cfgx[NR_IRQS] = {
|
|
#endif
|
|
[0] = { .vector = IRQ0_VECTOR, },
|
|
[1] = { .vector = IRQ1_VECTOR, },
|
|
[2] = { .vector = IRQ2_VECTOR, },
|
|
[3] = { .vector = IRQ3_VECTOR, },
|
|
[4] = { .vector = IRQ4_VECTOR, },
|
|
[5] = { .vector = IRQ5_VECTOR, },
|
|
[6] = { .vector = IRQ6_VECTOR, },
|
|
[7] = { .vector = IRQ7_VECTOR, },
|
|
[8] = { .vector = IRQ8_VECTOR, },
|
|
[9] = { .vector = IRQ9_VECTOR, },
|
|
[10] = { .vector = IRQ10_VECTOR, },
|
|
[11] = { .vector = IRQ11_VECTOR, },
|
|
[12] = { .vector = IRQ12_VECTOR, },
|
|
[13] = { .vector = IRQ13_VECTOR, },
|
|
[14] = { .vector = IRQ14_VECTOR, },
|
|
[15] = { .vector = IRQ15_VECTOR, },
|
|
};
|
|
|
|
int __init arch_early_irq_init(void)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
struct irq_desc *desc;
|
|
int count;
|
|
int i;
|
|
|
|
cfg = irq_cfgx;
|
|
count = ARRAY_SIZE(irq_cfgx);
|
|
|
|
for (i = 0; i < count; i++) {
|
|
desc = irq_to_desc(i);
|
|
desc->chip_data = &cfg[i];
|
|
alloc_bootmem_cpumask_var(&cfg[i].domain);
|
|
alloc_bootmem_cpumask_var(&cfg[i].old_domain);
|
|
if (i < NR_IRQS_LEGACY)
|
|
cpumask_setall(cfg[i].domain);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPARSE_IRQ
|
|
static struct irq_cfg *irq_cfg(unsigned int irq)
|
|
{
|
|
struct irq_cfg *cfg = NULL;
|
|
struct irq_desc *desc;
|
|
|
|
desc = irq_to_desc(irq);
|
|
if (desc)
|
|
cfg = desc->chip_data;
|
|
|
|
return cfg;
|
|
}
|
|
|
|
static struct irq_cfg *get_one_free_irq_cfg(int cpu)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
int node;
|
|
|
|
node = cpu_to_node(cpu);
|
|
|
|
cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
|
|
if (cfg) {
|
|
if (!alloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
|
|
kfree(cfg);
|
|
cfg = NULL;
|
|
} else if (!alloc_cpumask_var_node(&cfg->old_domain,
|
|
GFP_ATOMIC, node)) {
|
|
free_cpumask_var(cfg->domain);
|
|
kfree(cfg);
|
|
cfg = NULL;
|
|
} else {
|
|
cpumask_clear(cfg->domain);
|
|
cpumask_clear(cfg->old_domain);
|
|
}
|
|
}
|
|
|
|
return cfg;
|
|
}
|
|
|
|
int arch_init_chip_data(struct irq_desc *desc, int cpu)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
|
|
cfg = desc->chip_data;
|
|
if (!cfg) {
|
|
desc->chip_data = get_one_free_irq_cfg(cpu);
|
|
if (!desc->chip_data) {
|
|
printk(KERN_ERR "can not alloc irq_cfg\n");
|
|
BUG_ON(1);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
|
|
|
|
static void
|
|
init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
|
|
{
|
|
struct irq_pin_list *old_entry, *head, *tail, *entry;
|
|
|
|
cfg->irq_2_pin = NULL;
|
|
old_entry = old_cfg->irq_2_pin;
|
|
if (!old_entry)
|
|
return;
|
|
|
|
entry = get_one_free_irq_2_pin(cpu);
|
|
if (!entry)
|
|
return;
|
|
|
|
entry->apic = old_entry->apic;
|
|
entry->pin = old_entry->pin;
|
|
head = entry;
|
|
tail = entry;
|
|
old_entry = old_entry->next;
|
|
while (old_entry) {
|
|
entry = get_one_free_irq_2_pin(cpu);
|
|
if (!entry) {
|
|
entry = head;
|
|
while (entry) {
|
|
head = entry->next;
|
|
kfree(entry);
|
|
entry = head;
|
|
}
|
|
/* still use the old one */
|
|
return;
|
|
}
|
|
entry->apic = old_entry->apic;
|
|
entry->pin = old_entry->pin;
|
|
tail->next = entry;
|
|
tail = entry;
|
|
old_entry = old_entry->next;
|
|
}
|
|
|
|
tail->next = NULL;
|
|
cfg->irq_2_pin = head;
|
|
}
|
|
|
|
static void free_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg)
|
|
{
|
|
struct irq_pin_list *entry, *next;
|
|
|
|
if (old_cfg->irq_2_pin == cfg->irq_2_pin)
|
|
return;
|
|
|
|
entry = old_cfg->irq_2_pin;
|
|
|
|
while (entry) {
|
|
next = entry->next;
|
|
kfree(entry);
|
|
entry = next;
|
|
}
|
|
old_cfg->irq_2_pin = NULL;
|
|
}
|
|
|
|
void arch_init_copy_chip_data(struct irq_desc *old_desc,
|
|
struct irq_desc *desc, int cpu)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
struct irq_cfg *old_cfg;
|
|
|
|
cfg = get_one_free_irq_cfg(cpu);
|
|
|
|
if (!cfg)
|
|
return;
|
|
|
|
desc->chip_data = cfg;
|
|
|
|
old_cfg = old_desc->chip_data;
|
|
|
|
memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
|
|
|
|
init_copy_irq_2_pin(old_cfg, cfg, cpu);
|
|
}
|
|
|
|
static void free_irq_cfg(struct irq_cfg *old_cfg)
|
|
{
|
|
kfree(old_cfg);
|
|
}
|
|
|
|
void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc)
|
|
{
|
|
struct irq_cfg *old_cfg, *cfg;
|
|
|
|
old_cfg = old_desc->chip_data;
|
|
cfg = desc->chip_data;
|
|
|
|
if (old_cfg == cfg)
|
|
return;
|
|
|
|
if (old_cfg) {
|
|
free_irq_2_pin(old_cfg, cfg);
|
|
free_irq_cfg(old_cfg);
|
|
old_desc->chip_data = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
|
|
{
|
|
struct irq_cfg *cfg = desc->chip_data;
|
|
|
|
if (!cfg->move_in_progress) {
|
|
/* it means that domain is not changed */
|
|
if (!cpumask_intersects(&desc->affinity, mask))
|
|
cfg->move_desc_pending = 1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#else
|
|
static struct irq_cfg *irq_cfg(unsigned int irq)
|
|
{
|
|
return irq < nr_irqs ? irq_cfgx + irq : NULL;
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC
|
|
static inline void
|
|
set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
struct io_apic {
|
|
unsigned int index;
|
|
unsigned int unused[3];
|
|
unsigned int data;
|
|
};
|
|
|
|
static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
|
|
{
|
|
return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
|
|
+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
|
|
}
|
|
|
|
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
|
|
{
|
|
struct io_apic __iomem *io_apic = io_apic_base(apic);
|
|
writel(reg, &io_apic->index);
|
|
return readl(&io_apic->data);
|
|
}
|
|
|
|
static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
|
|
{
|
|
struct io_apic __iomem *io_apic = io_apic_base(apic);
|
|
writel(reg, &io_apic->index);
|
|
writel(value, &io_apic->data);
|
|
}
|
|
|
|
/*
|
|
* Re-write a value: to be used for read-modify-write
|
|
* cycles where the read already set up the index register.
|
|
*
|
|
* Older SiS APIC requires we rewrite the index register
|
|
*/
|
|
static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
|
|
{
|
|
struct io_apic __iomem *io_apic = io_apic_base(apic);
|
|
|
|
if (sis_apic_bug)
|
|
writel(reg, &io_apic->index);
|
|
writel(value, &io_apic->data);
|
|
}
|
|
|
|
static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
|
|
{
|
|
struct irq_pin_list *entry;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
entry = cfg->irq_2_pin;
|
|
for (;;) {
|
|
unsigned int reg;
|
|
int pin;
|
|
|
|
if (!entry)
|
|
break;
|
|
pin = entry->pin;
|
|
reg = io_apic_read(entry->apic, 0x10 + pin*2);
|
|
/* Is the remote IRR bit set? */
|
|
if (reg & IO_APIC_REDIR_REMOTE_IRR) {
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
return true;
|
|
}
|
|
if (!entry->next)
|
|
break;
|
|
entry = entry->next;
|
|
}
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
return false;
|
|
}
|
|
|
|
union entry_union {
|
|
struct { u32 w1, w2; };
|
|
struct IO_APIC_route_entry entry;
|
|
};
|
|
|
|
static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
|
|
{
|
|
union entry_union eu;
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
|
|
eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
return eu.entry;
|
|
}
|
|
|
|
/*
|
|
* When we write a new IO APIC routing entry, we need to write the high
|
|
* word first! If the mask bit in the low word is clear, we will enable
|
|
* the interrupt, and we need to make sure the entry is fully populated
|
|
* before that happens.
|
|
*/
|
|
static void
|
|
__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
|
|
{
|
|
union entry_union eu;
|
|
eu.entry = e;
|
|
io_apic_write(apic, 0x11 + 2*pin, eu.w2);
|
|
io_apic_write(apic, 0x10 + 2*pin, eu.w1);
|
|
}
|
|
|
|
static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
__ioapic_write_entry(apic, pin, e);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* When we mask an IO APIC routing entry, we need to write the low
|
|
* word first, in order to set the mask bit before we change the
|
|
* high bits!
|
|
*/
|
|
static void ioapic_mask_entry(int apic, int pin)
|
|
{
|
|
unsigned long flags;
|
|
union entry_union eu = { .entry.mask = 1 };
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
io_apic_write(apic, 0x10 + 2*pin, eu.w1);
|
|
io_apic_write(apic, 0x11 + 2*pin, eu.w2);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void send_cleanup_vector(struct irq_cfg *cfg)
|
|
{
|
|
cpumask_var_t cleanup_mask;
|
|
|
|
if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
|
|
unsigned int i;
|
|
cfg->move_cleanup_count = 0;
|
|
for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
|
|
cfg->move_cleanup_count++;
|
|
for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
|
|
send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
|
|
} else {
|
|
cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
|
|
cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
|
|
send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
|
|
free_cpumask_var(cleanup_mask);
|
|
}
|
|
cfg->move_in_progress = 0;
|
|
}
|
|
|
|
static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
|
|
{
|
|
int apic, pin;
|
|
struct irq_pin_list *entry;
|
|
u8 vector = cfg->vector;
|
|
|
|
entry = cfg->irq_2_pin;
|
|
for (;;) {
|
|
unsigned int reg;
|
|
|
|
if (!entry)
|
|
break;
|
|
|
|
apic = entry->apic;
|
|
pin = entry->pin;
|
|
#ifdef CONFIG_INTR_REMAP
|
|
/*
|
|
* With interrupt-remapping, destination information comes
|
|
* from interrupt-remapping table entry.
|
|
*/
|
|
if (!irq_remapped(irq))
|
|
io_apic_write(apic, 0x11 + pin*2, dest);
|
|
#else
|
|
io_apic_write(apic, 0x11 + pin*2, dest);
|
|
#endif
|
|
reg = io_apic_read(apic, 0x10 + pin*2);
|
|
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
|
|
reg |= vector;
|
|
io_apic_modify(apic, 0x10 + pin*2, reg);
|
|
if (!entry->next)
|
|
break;
|
|
entry = entry->next;
|
|
}
|
|
}
|
|
|
|
static int
|
|
assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
|
|
|
|
/*
|
|
* Either sets desc->affinity to a valid value, and returns cpu_mask_to_apicid
|
|
* of that, or returns BAD_APICID and leaves desc->affinity untouched.
|
|
*/
|
|
static unsigned int
|
|
set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
unsigned int irq;
|
|
|
|
if (!cpumask_intersects(mask, cpu_online_mask))
|
|
return BAD_APICID;
|
|
|
|
irq = desc->irq;
|
|
cfg = desc->chip_data;
|
|
if (assign_irq_vector(irq, cfg, mask))
|
|
return BAD_APICID;
|
|
|
|
cpumask_and(&desc->affinity, cfg->domain, mask);
|
|
set_extra_move_desc(desc, mask);
|
|
return cpu_mask_to_apicid_and(&desc->affinity, cpu_online_mask);
|
|
}
|
|
|
|
static void
|
|
set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
unsigned long flags;
|
|
unsigned int dest;
|
|
unsigned int irq;
|
|
|
|
irq = desc->irq;
|
|
cfg = desc->chip_data;
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
dest = set_desc_affinity(desc, mask);
|
|
if (dest != BAD_APICID) {
|
|
/* Only the high 8 bits are valid. */
|
|
dest = SET_APIC_LOGICAL_ID(dest);
|
|
__target_IO_APIC_irq(irq, dest, cfg);
|
|
}
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
}
|
|
|
|
static void
|
|
set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
|
|
{
|
|
struct irq_desc *desc;
|
|
|
|
desc = irq_to_desc(irq);
|
|
|
|
set_ioapic_affinity_irq_desc(desc, mask);
|
|
}
|
|
#endif /* CONFIG_SMP */
|
|
|
|
/*
|
|
* The common case is 1:1 IRQ<->pin mappings. Sometimes there are
|
|
* shared ISA-space IRQs, so we have to support them. We are super
|
|
* fast in the common case, and fast for shared ISA-space IRQs.
|
|
*/
|
|
static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
|
|
{
|
|
struct irq_pin_list *entry;
|
|
|
|
entry = cfg->irq_2_pin;
|
|
if (!entry) {
|
|
entry = get_one_free_irq_2_pin(cpu);
|
|
if (!entry) {
|
|
printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
|
|
apic, pin);
|
|
return;
|
|
}
|
|
cfg->irq_2_pin = entry;
|
|
entry->apic = apic;
|
|
entry->pin = pin;
|
|
return;
|
|
}
|
|
|
|
while (entry->next) {
|
|
/* not again, please */
|
|
if (entry->apic == apic && entry->pin == pin)
|
|
return;
|
|
|
|
entry = entry->next;
|
|
}
|
|
|
|
entry->next = get_one_free_irq_2_pin(cpu);
|
|
entry = entry->next;
|
|
entry->apic = apic;
|
|
entry->pin = pin;
|
|
}
|
|
|
|
/*
|
|
* Reroute an IRQ to a different pin.
|
|
*/
|
|
static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu,
|
|
int oldapic, int oldpin,
|
|
int newapic, int newpin)
|
|
{
|
|
struct irq_pin_list *entry = cfg->irq_2_pin;
|
|
int replaced = 0;
|
|
|
|
while (entry) {
|
|
if (entry->apic == oldapic && entry->pin == oldpin) {
|
|
entry->apic = newapic;
|
|
entry->pin = newpin;
|
|
replaced = 1;
|
|
/* every one is different, right? */
|
|
break;
|
|
}
|
|
entry = entry->next;
|
|
}
|
|
|
|
/* why? call replace before add? */
|
|
if (!replaced)
|
|
add_pin_to_irq_cpu(cfg, cpu, newapic, newpin);
|
|
}
|
|
|
|
static inline void io_apic_modify_irq(struct irq_cfg *cfg,
|
|
int mask_and, int mask_or,
|
|
void (*final)(struct irq_pin_list *entry))
|
|
{
|
|
int pin;
|
|
struct irq_pin_list *entry;
|
|
|
|
for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
|
|
unsigned int reg;
|
|
pin = entry->pin;
|
|
reg = io_apic_read(entry->apic, 0x10 + pin * 2);
|
|
reg &= mask_and;
|
|
reg |= mask_or;
|
|
io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
|
|
if (final)
|
|
final(entry);
|
|
}
|
|
}
|
|
|
|
static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
|
|
{
|
|
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_X86_64
|
|
static void io_apic_sync(struct irq_pin_list *entry)
|
|
{
|
|
/*
|
|
* Synchronize the IO-APIC and the CPU by doing
|
|
* a dummy read from the IO-APIC
|
|
*/
|
|
struct io_apic __iomem *io_apic;
|
|
io_apic = io_apic_base(entry->apic);
|
|
readl(&io_apic->data);
|
|
}
|
|
|
|
static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
|
|
{
|
|
io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
|
|
}
|
|
#else /* CONFIG_X86_32 */
|
|
static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
|
|
{
|
|
io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
|
|
}
|
|
|
|
static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
|
|
{
|
|
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
|
|
IO_APIC_REDIR_MASKED, NULL);
|
|
}
|
|
|
|
static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
|
|
{
|
|
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
|
|
IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
|
|
}
|
|
#endif /* CONFIG_X86_32 */
|
|
|
|
static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
|
|
{
|
|
struct irq_cfg *cfg = desc->chip_data;
|
|
unsigned long flags;
|
|
|
|
BUG_ON(!cfg);
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
__mask_IO_APIC_irq(cfg);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
}
|
|
|
|
static void unmask_IO_APIC_irq_desc(struct irq_desc *desc)
|
|
{
|
|
struct irq_cfg *cfg = desc->chip_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
__unmask_IO_APIC_irq(cfg);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
}
|
|
|
|
static void mask_IO_APIC_irq(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
|
|
mask_IO_APIC_irq_desc(desc);
|
|
}
|
|
static void unmask_IO_APIC_irq(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
|
|
unmask_IO_APIC_irq_desc(desc);
|
|
}
|
|
|
|
static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
|
|
{
|
|
struct IO_APIC_route_entry entry;
|
|
|
|
/* Check delivery_mode to be sure we're not clearing an SMI pin */
|
|
entry = ioapic_read_entry(apic, pin);
|
|
if (entry.delivery_mode == dest_SMI)
|
|
return;
|
|
/*
|
|
* Disable it in the IO-APIC irq-routing table:
|
|
*/
|
|
ioapic_mask_entry(apic, pin);
|
|
}
|
|
|
|
static void clear_IO_APIC (void)
|
|
{
|
|
int apic, pin;
|
|
|
|
for (apic = 0; apic < nr_ioapics; apic++)
|
|
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
|
|
clear_IO_APIC_pin(apic, pin);
|
|
}
|
|
|
|
#if !defined(CONFIG_SMP) && defined(CONFIG_X86_32)
|
|
void send_IPI_self(int vector)
|
|
{
|
|
unsigned int cfg;
|
|
|
|
/*
|
|
* Wait for idle.
|
|
*/
|
|
apic_wait_icr_idle();
|
|
cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
|
|
/*
|
|
* Send the IPI. The write to APIC_ICR fires this off.
|
|
*/
|
|
apic_write(APIC_ICR, cfg);
|
|
}
|
|
#endif /* !CONFIG_SMP && CONFIG_X86_32*/
|
|
|
|
#ifdef CONFIG_X86_32
|
|
/*
|
|
* support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
|
|
* specific CPU-side IRQs.
|
|
*/
|
|
|
|
#define MAX_PIRQS 8
|
|
static int pirq_entries [MAX_PIRQS];
|
|
static int pirqs_enabled;
|
|
|
|
static int __init ioapic_pirq_setup(char *str)
|
|
{
|
|
int i, max;
|
|
int ints[MAX_PIRQS+1];
|
|
|
|
get_options(str, ARRAY_SIZE(ints), ints);
|
|
|
|
for (i = 0; i < MAX_PIRQS; i++)
|
|
pirq_entries[i] = -1;
|
|
|
|
pirqs_enabled = 1;
|
|
apic_printk(APIC_VERBOSE, KERN_INFO
|
|
"PIRQ redirection, working around broken MP-BIOS.\n");
|
|
max = MAX_PIRQS;
|
|
if (ints[0] < MAX_PIRQS)
|
|
max = ints[0];
|
|
|
|
for (i = 0; i < max; i++) {
|
|
apic_printk(APIC_VERBOSE, KERN_DEBUG
|
|
"... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
|
|
/*
|
|
* PIRQs are mapped upside down, usually.
|
|
*/
|
|
pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
__setup("pirq=", ioapic_pirq_setup);
|
|
#endif /* CONFIG_X86_32 */
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
/* I/O APIC RTE contents at the OS boot up */
|
|
static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
|
|
|
|
/*
|
|
* Saves and masks all the unmasked IO-APIC RTE's
|
|
*/
|
|
int save_mask_IO_APIC_setup(void)
|
|
{
|
|
union IO_APIC_reg_01 reg_01;
|
|
unsigned long flags;
|
|
int apic, pin;
|
|
|
|
/*
|
|
* The number of IO-APIC IRQ registers (== #pins):
|
|
*/
|
|
for (apic = 0; apic < nr_ioapics; apic++) {
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_01.raw = io_apic_read(apic, 1);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
nr_ioapic_registers[apic] = reg_01.bits.entries+1;
|
|
}
|
|
|
|
for (apic = 0; apic < nr_ioapics; apic++) {
|
|
early_ioapic_entries[apic] =
|
|
kzalloc(sizeof(struct IO_APIC_route_entry) *
|
|
nr_ioapic_registers[apic], GFP_KERNEL);
|
|
if (!early_ioapic_entries[apic])
|
|
goto nomem;
|
|
}
|
|
|
|
for (apic = 0; apic < nr_ioapics; apic++)
|
|
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
|
|
struct IO_APIC_route_entry entry;
|
|
|
|
entry = early_ioapic_entries[apic][pin] =
|
|
ioapic_read_entry(apic, pin);
|
|
if (!entry.mask) {
|
|
entry.mask = 1;
|
|
ioapic_write_entry(apic, pin, entry);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
nomem:
|
|
while (apic >= 0)
|
|
kfree(early_ioapic_entries[apic--]);
|
|
memset(early_ioapic_entries, 0,
|
|
ARRAY_SIZE(early_ioapic_entries));
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
void restore_IO_APIC_setup(void)
|
|
{
|
|
int apic, pin;
|
|
|
|
for (apic = 0; apic < nr_ioapics; apic++) {
|
|
if (!early_ioapic_entries[apic])
|
|
break;
|
|
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
|
|
ioapic_write_entry(apic, pin,
|
|
early_ioapic_entries[apic][pin]);
|
|
kfree(early_ioapic_entries[apic]);
|
|
early_ioapic_entries[apic] = NULL;
|
|
}
|
|
}
|
|
|
|
void reinit_intr_remapped_IO_APIC(int intr_remapping)
|
|
{
|
|
/*
|
|
* for now plain restore of previous settings.
|
|
* TBD: In the case of OS enabling interrupt-remapping,
|
|
* IO-APIC RTE's need to be setup to point to interrupt-remapping
|
|
* table entries. for now, do a plain restore, and wait for
|
|
* the setup_IO_APIC_irqs() to do proper initialization.
|
|
*/
|
|
restore_IO_APIC_setup();
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Find the IRQ entry number of a certain pin.
|
|
*/
|
|
static int find_irq_entry(int apic, int pin, int type)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < mp_irq_entries; i++)
|
|
if (mp_irqs[i].mp_irqtype == type &&
|
|
(mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
|
|
mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
|
|
mp_irqs[i].mp_dstirq == pin)
|
|
return i;
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Find the pin to which IRQ[irq] (ISA) is connected
|
|
*/
|
|
static int __init find_isa_irq_pin(int irq, int type)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < mp_irq_entries; i++) {
|
|
int lbus = mp_irqs[i].mp_srcbus;
|
|
|
|
if (test_bit(lbus, mp_bus_not_pci) &&
|
|
(mp_irqs[i].mp_irqtype == type) &&
|
|
(mp_irqs[i].mp_srcbusirq == irq))
|
|
|
|
return mp_irqs[i].mp_dstirq;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int __init find_isa_irq_apic(int irq, int type)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < mp_irq_entries; i++) {
|
|
int lbus = mp_irqs[i].mp_srcbus;
|
|
|
|
if (test_bit(lbus, mp_bus_not_pci) &&
|
|
(mp_irqs[i].mp_irqtype == type) &&
|
|
(mp_irqs[i].mp_srcbusirq == irq))
|
|
break;
|
|
}
|
|
if (i < mp_irq_entries) {
|
|
int apic;
|
|
for(apic = 0; apic < nr_ioapics; apic++) {
|
|
if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
|
|
return apic;
|
|
}
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Find a specific PCI IRQ entry.
|
|
* Not an __init, possibly needed by modules
|
|
*/
|
|
static int pin_2_irq(int idx, int apic, int pin);
|
|
|
|
int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
|
|
{
|
|
int apic, i, best_guess = -1;
|
|
|
|
apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
|
|
bus, slot, pin);
|
|
if (test_bit(bus, mp_bus_not_pci)) {
|
|
apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
|
|
return -1;
|
|
}
|
|
for (i = 0; i < mp_irq_entries; i++) {
|
|
int lbus = mp_irqs[i].mp_srcbus;
|
|
|
|
for (apic = 0; apic < nr_ioapics; apic++)
|
|
if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
|
|
mp_irqs[i].mp_dstapic == MP_APIC_ALL)
|
|
break;
|
|
|
|
if (!test_bit(lbus, mp_bus_not_pci) &&
|
|
!mp_irqs[i].mp_irqtype &&
|
|
(bus == lbus) &&
|
|
(slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
|
|
int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
|
|
|
|
if (!(apic || IO_APIC_IRQ(irq)))
|
|
continue;
|
|
|
|
if (pin == (mp_irqs[i].mp_srcbusirq & 3))
|
|
return irq;
|
|
/*
|
|
* Use the first all-but-pin matching entry as a
|
|
* best-guess fuzzy result for broken mptables.
|
|
*/
|
|
if (best_guess < 0)
|
|
best_guess = irq;
|
|
}
|
|
}
|
|
return best_guess;
|
|
}
|
|
|
|
EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
|
|
|
|
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
|
|
/*
|
|
* EISA Edge/Level control register, ELCR
|
|
*/
|
|
static int EISA_ELCR(unsigned int irq)
|
|
{
|
|
if (irq < NR_IRQS_LEGACY) {
|
|
unsigned int port = 0x4d0 + (irq >> 3);
|
|
return (inb(port) >> (irq & 7)) & 1;
|
|
}
|
|
apic_printk(APIC_VERBOSE, KERN_INFO
|
|
"Broken MPtable reports ISA irq %d\n", irq);
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
/* ISA interrupts are always polarity zero edge triggered,
|
|
* when listed as conforming in the MP table. */
|
|
|
|
#define default_ISA_trigger(idx) (0)
|
|
#define default_ISA_polarity(idx) (0)
|
|
|
|
/* EISA interrupts are always polarity zero and can be edge or level
|
|
* trigger depending on the ELCR value. If an interrupt is listed as
|
|
* EISA conforming in the MP table, that means its trigger type must
|
|
* be read in from the ELCR */
|
|
|
|
#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
|
|
#define default_EISA_polarity(idx) default_ISA_polarity(idx)
|
|
|
|
/* PCI interrupts are always polarity one level triggered,
|
|
* when listed as conforming in the MP table. */
|
|
|
|
#define default_PCI_trigger(idx) (1)
|
|
#define default_PCI_polarity(idx) (1)
|
|
|
|
/* MCA interrupts are always polarity zero level triggered,
|
|
* when listed as conforming in the MP table. */
|
|
|
|
#define default_MCA_trigger(idx) (1)
|
|
#define default_MCA_polarity(idx) default_ISA_polarity(idx)
|
|
|
|
static int MPBIOS_polarity(int idx)
|
|
{
|
|
int bus = mp_irqs[idx].mp_srcbus;
|
|
int polarity;
|
|
|
|
/*
|
|
* Determine IRQ line polarity (high active or low active):
|
|
*/
|
|
switch (mp_irqs[idx].mp_irqflag & 3)
|
|
{
|
|
case 0: /* conforms, ie. bus-type dependent polarity */
|
|
if (test_bit(bus, mp_bus_not_pci))
|
|
polarity = default_ISA_polarity(idx);
|
|
else
|
|
polarity = default_PCI_polarity(idx);
|
|
break;
|
|
case 1: /* high active */
|
|
{
|
|
polarity = 0;
|
|
break;
|
|
}
|
|
case 2: /* reserved */
|
|
{
|
|
printk(KERN_WARNING "broken BIOS!!\n");
|
|
polarity = 1;
|
|
break;
|
|
}
|
|
case 3: /* low active */
|
|
{
|
|
polarity = 1;
|
|
break;
|
|
}
|
|
default: /* invalid */
|
|
{
|
|
printk(KERN_WARNING "broken BIOS!!\n");
|
|
polarity = 1;
|
|
break;
|
|
}
|
|
}
|
|
return polarity;
|
|
}
|
|
|
|
static int MPBIOS_trigger(int idx)
|
|
{
|
|
int bus = mp_irqs[idx].mp_srcbus;
|
|
int trigger;
|
|
|
|
/*
|
|
* Determine IRQ trigger mode (edge or level sensitive):
|
|
*/
|
|
switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
|
|
{
|
|
case 0: /* conforms, ie. bus-type dependent */
|
|
if (test_bit(bus, mp_bus_not_pci))
|
|
trigger = default_ISA_trigger(idx);
|
|
else
|
|
trigger = default_PCI_trigger(idx);
|
|
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
|
|
switch (mp_bus_id_to_type[bus]) {
|
|
case MP_BUS_ISA: /* ISA pin */
|
|
{
|
|
/* set before the switch */
|
|
break;
|
|
}
|
|
case MP_BUS_EISA: /* EISA pin */
|
|
{
|
|
trigger = default_EISA_trigger(idx);
|
|
break;
|
|
}
|
|
case MP_BUS_PCI: /* PCI pin */
|
|
{
|
|
/* set before the switch */
|
|
break;
|
|
}
|
|
case MP_BUS_MCA: /* MCA pin */
|
|
{
|
|
trigger = default_MCA_trigger(idx);
|
|
break;
|
|
}
|
|
default:
|
|
{
|
|
printk(KERN_WARNING "broken BIOS!!\n");
|
|
trigger = 1;
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
break;
|
|
case 1: /* edge */
|
|
{
|
|
trigger = 0;
|
|
break;
|
|
}
|
|
case 2: /* reserved */
|
|
{
|
|
printk(KERN_WARNING "broken BIOS!!\n");
|
|
trigger = 1;
|
|
break;
|
|
}
|
|
case 3: /* level */
|
|
{
|
|
trigger = 1;
|
|
break;
|
|
}
|
|
default: /* invalid */
|
|
{
|
|
printk(KERN_WARNING "broken BIOS!!\n");
|
|
trigger = 0;
|
|
break;
|
|
}
|
|
}
|
|
return trigger;
|
|
}
|
|
|
|
static inline int irq_polarity(int idx)
|
|
{
|
|
return MPBIOS_polarity(idx);
|
|
}
|
|
|
|
static inline int irq_trigger(int idx)
|
|
{
|
|
return MPBIOS_trigger(idx);
|
|
}
|
|
|
|
int (*ioapic_renumber_irq)(int ioapic, int irq);
|
|
static int pin_2_irq(int idx, int apic, int pin)
|
|
{
|
|
int irq, i;
|
|
int bus = mp_irqs[idx].mp_srcbus;
|
|
|
|
/*
|
|
* Debugging check, we are in big trouble if this message pops up!
|
|
*/
|
|
if (mp_irqs[idx].mp_dstirq != pin)
|
|
printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
|
|
|
|
if (test_bit(bus, mp_bus_not_pci)) {
|
|
irq = mp_irqs[idx].mp_srcbusirq;
|
|
} else {
|
|
/*
|
|
* PCI IRQs are mapped in order
|
|
*/
|
|
i = irq = 0;
|
|
while (i < apic)
|
|
irq += nr_ioapic_registers[i++];
|
|
irq += pin;
|
|
/*
|
|
* For MPS mode, so far only needed by ES7000 platform
|
|
*/
|
|
if (ioapic_renumber_irq)
|
|
irq = ioapic_renumber_irq(apic, irq);
|
|
}
|
|
|
|
#ifdef CONFIG_X86_32
|
|
/*
|
|
* PCI IRQ command line redirection. Yes, limits are hardcoded.
|
|
*/
|
|
if ((pin >= 16) && (pin <= 23)) {
|
|
if (pirq_entries[pin-16] != -1) {
|
|
if (!pirq_entries[pin-16]) {
|
|
apic_printk(APIC_VERBOSE, KERN_DEBUG
|
|
"disabling PIRQ%d\n", pin-16);
|
|
} else {
|
|
irq = pirq_entries[pin-16];
|
|
apic_printk(APIC_VERBOSE, KERN_DEBUG
|
|
"using PIRQ%d -> IRQ %d\n",
|
|
pin-16, irq);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return irq;
|
|
}
|
|
|
|
void lock_vector_lock(void)
|
|
{
|
|
/* Used to the online set of cpus does not change
|
|
* during assign_irq_vector.
|
|
*/
|
|
spin_lock(&vector_lock);
|
|
}
|
|
|
|
void unlock_vector_lock(void)
|
|
{
|
|
spin_unlock(&vector_lock);
|
|
}
|
|
|
|
static int
|
|
__assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
|
|
{
|
|
/*
|
|
* NOTE! The local APIC isn't very good at handling
|
|
* multiple interrupts at the same interrupt level.
|
|
* As the interrupt level is determined by taking the
|
|
* vector number and shifting that right by 4, we
|
|
* want to spread these out a bit so that they don't
|
|
* all fall in the same interrupt level.
|
|
*
|
|
* Also, we've got to be careful not to trash gate
|
|
* 0x80, because int 0x80 is hm, kind of importantish. ;)
|
|
*/
|
|
static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
|
|
unsigned int old_vector;
|
|
int cpu, err;
|
|
cpumask_var_t tmp_mask;
|
|
|
|
if ((cfg->move_in_progress) || cfg->move_cleanup_count)
|
|
return -EBUSY;
|
|
|
|
if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
|
|
return -ENOMEM;
|
|
|
|
old_vector = cfg->vector;
|
|
if (old_vector) {
|
|
cpumask_and(tmp_mask, mask, cpu_online_mask);
|
|
cpumask_and(tmp_mask, cfg->domain, tmp_mask);
|
|
if (!cpumask_empty(tmp_mask)) {
|
|
free_cpumask_var(tmp_mask);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Only try and allocate irqs on cpus that are present */
|
|
err = -ENOSPC;
|
|
for_each_cpu_and(cpu, mask, cpu_online_mask) {
|
|
int new_cpu;
|
|
int vector, offset;
|
|
|
|
vector_allocation_domain(cpu, tmp_mask);
|
|
|
|
vector = current_vector;
|
|
offset = current_offset;
|
|
next:
|
|
vector += 8;
|
|
if (vector >= first_system_vector) {
|
|
/* If out of vectors on large boxen, must share them. */
|
|
offset = (offset + 1) % 8;
|
|
vector = FIRST_DEVICE_VECTOR + offset;
|
|
}
|
|
if (unlikely(current_vector == vector))
|
|
continue;
|
|
|
|
if (test_bit(vector, used_vectors))
|
|
goto next;
|
|
|
|
for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
|
|
if (per_cpu(vector_irq, new_cpu)[vector] != -1)
|
|
goto next;
|
|
/* Found one! */
|
|
current_vector = vector;
|
|
current_offset = offset;
|
|
if (old_vector) {
|
|
cfg->move_in_progress = 1;
|
|
cpumask_copy(cfg->old_domain, cfg->domain);
|
|
}
|
|
for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
|
|
per_cpu(vector_irq, new_cpu)[vector] = irq;
|
|
cfg->vector = vector;
|
|
cpumask_copy(cfg->domain, tmp_mask);
|
|
err = 0;
|
|
break;
|
|
}
|
|
free_cpumask_var(tmp_mask);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
|
|
{
|
|
int err;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&vector_lock, flags);
|
|
err = __assign_irq_vector(irq, cfg, mask);
|
|
spin_unlock_irqrestore(&vector_lock, flags);
|
|
return err;
|
|
}
|
|
|
|
static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
|
|
{
|
|
int cpu, vector;
|
|
|
|
BUG_ON(!cfg->vector);
|
|
|
|
vector = cfg->vector;
|
|
for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
|
|
per_cpu(vector_irq, cpu)[vector] = -1;
|
|
|
|
cfg->vector = 0;
|
|
cpumask_clear(cfg->domain);
|
|
|
|
if (likely(!cfg->move_in_progress))
|
|
return;
|
|
for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
|
|
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
|
|
vector++) {
|
|
if (per_cpu(vector_irq, cpu)[vector] != irq)
|
|
continue;
|
|
per_cpu(vector_irq, cpu)[vector] = -1;
|
|
break;
|
|
}
|
|
}
|
|
cfg->move_in_progress = 0;
|
|
}
|
|
|
|
void __setup_vector_irq(int cpu)
|
|
{
|
|
/* Initialize vector_irq on a new cpu */
|
|
/* This function must be called with vector_lock held */
|
|
int irq, vector;
|
|
struct irq_cfg *cfg;
|
|
struct irq_desc *desc;
|
|
|
|
/* Mark the inuse vectors */
|
|
for_each_irq_desc(irq, desc) {
|
|
cfg = desc->chip_data;
|
|
if (!cpumask_test_cpu(cpu, cfg->domain))
|
|
continue;
|
|
vector = cfg->vector;
|
|
per_cpu(vector_irq, cpu)[vector] = irq;
|
|
}
|
|
/* Mark the free vectors */
|
|
for (vector = 0; vector < NR_VECTORS; ++vector) {
|
|
irq = per_cpu(vector_irq, cpu)[vector];
|
|
if (irq < 0)
|
|
continue;
|
|
|
|
cfg = irq_cfg(irq);
|
|
if (!cpumask_test_cpu(cpu, cfg->domain))
|
|
per_cpu(vector_irq, cpu)[vector] = -1;
|
|
}
|
|
}
|
|
|
|
static struct irq_chip ioapic_chip;
|
|
#ifdef CONFIG_INTR_REMAP
|
|
static struct irq_chip ir_ioapic_chip;
|
|
#endif
|
|
|
|
#define IOAPIC_AUTO -1
|
|
#define IOAPIC_EDGE 0
|
|
#define IOAPIC_LEVEL 1
|
|
|
|
#ifdef CONFIG_X86_32
|
|
static inline int IO_APIC_irq_trigger(int irq)
|
|
{
|
|
int apic, idx, pin;
|
|
|
|
for (apic = 0; apic < nr_ioapics; apic++) {
|
|
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
|
|
idx = find_irq_entry(apic, pin, mp_INT);
|
|
if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
|
|
return irq_trigger(idx);
|
|
}
|
|
}
|
|
/*
|
|
* nonexistent IRQs are edge default
|
|
*/
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int IO_APIC_irq_trigger(int irq)
|
|
{
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
static void ioapic_register_intr(int irq, struct irq_desc *desc, unsigned long trigger)
|
|
{
|
|
|
|
if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
|
|
trigger == IOAPIC_LEVEL)
|
|
desc->status |= IRQ_LEVEL;
|
|
else
|
|
desc->status &= ~IRQ_LEVEL;
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (irq_remapped(irq)) {
|
|
desc->status |= IRQ_MOVE_PCNTXT;
|
|
if (trigger)
|
|
set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
|
|
handle_fasteoi_irq,
|
|
"fasteoi");
|
|
else
|
|
set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
|
|
handle_edge_irq, "edge");
|
|
return;
|
|
}
|
|
#endif
|
|
if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
|
|
trigger == IOAPIC_LEVEL)
|
|
set_irq_chip_and_handler_name(irq, &ioapic_chip,
|
|
handle_fasteoi_irq,
|
|
"fasteoi");
|
|
else
|
|
set_irq_chip_and_handler_name(irq, &ioapic_chip,
|
|
handle_edge_irq, "edge");
|
|
}
|
|
|
|
static int setup_ioapic_entry(int apic, int irq,
|
|
struct IO_APIC_route_entry *entry,
|
|
unsigned int destination, int trigger,
|
|
int polarity, int vector)
|
|
{
|
|
/*
|
|
* add it to the IO-APIC irq-routing table:
|
|
*/
|
|
memset(entry,0,sizeof(*entry));
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (intr_remapping_enabled) {
|
|
struct intel_iommu *iommu = map_ioapic_to_ir(apic);
|
|
struct irte irte;
|
|
struct IR_IO_APIC_route_entry *ir_entry =
|
|
(struct IR_IO_APIC_route_entry *) entry;
|
|
int index;
|
|
|
|
if (!iommu)
|
|
panic("No mapping iommu for ioapic %d\n", apic);
|
|
|
|
index = alloc_irte(iommu, irq, 1);
|
|
if (index < 0)
|
|
panic("Failed to allocate IRTE for ioapic %d\n", apic);
|
|
|
|
memset(&irte, 0, sizeof(irte));
|
|
|
|
irte.present = 1;
|
|
irte.dst_mode = INT_DEST_MODE;
|
|
irte.trigger_mode = trigger;
|
|
irte.dlvry_mode = INT_DELIVERY_MODE;
|
|
irte.vector = vector;
|
|
irte.dest_id = IRTE_DEST(destination);
|
|
|
|
modify_irte(irq, &irte);
|
|
|
|
ir_entry->index2 = (index >> 15) & 0x1;
|
|
ir_entry->zero = 0;
|
|
ir_entry->format = 1;
|
|
ir_entry->index = (index & 0x7fff);
|
|
} else
|
|
#endif
|
|
{
|
|
entry->delivery_mode = INT_DELIVERY_MODE;
|
|
entry->dest_mode = INT_DEST_MODE;
|
|
entry->dest = destination;
|
|
}
|
|
|
|
entry->mask = 0; /* enable IRQ */
|
|
entry->trigger = trigger;
|
|
entry->polarity = polarity;
|
|
entry->vector = vector;
|
|
|
|
/* Mask level triggered irqs.
|
|
* Use IRQ_DELAYED_DISABLE for edge triggered irqs.
|
|
*/
|
|
if (trigger)
|
|
entry->mask = 1;
|
|
return 0;
|
|
}
|
|
|
|
static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, struct irq_desc *desc,
|
|
int trigger, int polarity)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
struct IO_APIC_route_entry entry;
|
|
unsigned int dest;
|
|
|
|
if (!IO_APIC_IRQ(irq))
|
|
return;
|
|
|
|
cfg = desc->chip_data;
|
|
|
|
if (assign_irq_vector(irq, cfg, TARGET_CPUS))
|
|
return;
|
|
|
|
dest = cpu_mask_to_apicid_and(cfg->domain, TARGET_CPUS);
|
|
|
|
apic_printk(APIC_VERBOSE,KERN_DEBUG
|
|
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
|
|
"IRQ %d Mode:%i Active:%i)\n",
|
|
apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
|
|
irq, trigger, polarity);
|
|
|
|
|
|
if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
|
|
dest, trigger, polarity, cfg->vector)) {
|
|
printk("Failed to setup ioapic entry for ioapic %d, pin %d\n",
|
|
mp_ioapics[apic].mp_apicid, pin);
|
|
__clear_irq_vector(irq, cfg);
|
|
return;
|
|
}
|
|
|
|
ioapic_register_intr(irq, desc, trigger);
|
|
if (irq < NR_IRQS_LEGACY)
|
|
disable_8259A_irq(irq);
|
|
|
|
ioapic_write_entry(apic, pin, entry);
|
|
}
|
|
|
|
static void __init setup_IO_APIC_irqs(void)
|
|
{
|
|
int apic, pin, idx, irq;
|
|
int notcon = 0;
|
|
struct irq_desc *desc;
|
|
struct irq_cfg *cfg;
|
|
int cpu = boot_cpu_id;
|
|
|
|
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
|
|
|
|
for (apic = 0; apic < nr_ioapics; apic++) {
|
|
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
|
|
|
|
idx = find_irq_entry(apic, pin, mp_INT);
|
|
if (idx == -1) {
|
|
if (!notcon) {
|
|
notcon = 1;
|
|
apic_printk(APIC_VERBOSE,
|
|
KERN_DEBUG " %d-%d",
|
|
mp_ioapics[apic].mp_apicid,
|
|
pin);
|
|
} else
|
|
apic_printk(APIC_VERBOSE, " %d-%d",
|
|
mp_ioapics[apic].mp_apicid,
|
|
pin);
|
|
continue;
|
|
}
|
|
if (notcon) {
|
|
apic_printk(APIC_VERBOSE,
|
|
" (apicid-pin) not connected\n");
|
|
notcon = 0;
|
|
}
|
|
|
|
irq = pin_2_irq(idx, apic, pin);
|
|
#ifdef CONFIG_X86_32
|
|
if (multi_timer_check(apic, irq))
|
|
continue;
|
|
#endif
|
|
desc = irq_to_desc_alloc_cpu(irq, cpu);
|
|
if (!desc) {
|
|
printk(KERN_INFO "can not get irq_desc for %d\n", irq);
|
|
continue;
|
|
}
|
|
cfg = desc->chip_data;
|
|
add_pin_to_irq_cpu(cfg, cpu, apic, pin);
|
|
|
|
setup_IO_APIC_irq(apic, pin, irq, desc,
|
|
irq_trigger(idx), irq_polarity(idx));
|
|
}
|
|
}
|
|
|
|
if (notcon)
|
|
apic_printk(APIC_VERBOSE,
|
|
" (apicid-pin) not connected\n");
|
|
}
|
|
|
|
/*
|
|
* Set up the timer pin, possibly with the 8259A-master behind.
|
|
*/
|
|
static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
|
|
int vector)
|
|
{
|
|
struct IO_APIC_route_entry entry;
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (intr_remapping_enabled)
|
|
return;
|
|
#endif
|
|
|
|
memset(&entry, 0, sizeof(entry));
|
|
|
|
/*
|
|
* We use logical delivery to get the timer IRQ
|
|
* to the first CPU.
|
|
*/
|
|
entry.dest_mode = INT_DEST_MODE;
|
|
entry.mask = 1; /* mask IRQ now */
|
|
entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
|
|
entry.delivery_mode = INT_DELIVERY_MODE;
|
|
entry.polarity = 0;
|
|
entry.trigger = 0;
|
|
entry.vector = vector;
|
|
|
|
/*
|
|
* The timer IRQ doesn't have to know that behind the
|
|
* scene we may have a 8259A-master in AEOI mode ...
|
|
*/
|
|
set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
|
|
|
|
/*
|
|
* Add it to the IO-APIC irq-routing table:
|
|
*/
|
|
ioapic_write_entry(apic, pin, entry);
|
|
}
|
|
|
|
|
|
__apicdebuginit(void) print_IO_APIC(void)
|
|
{
|
|
int apic, i;
|
|
union IO_APIC_reg_00 reg_00;
|
|
union IO_APIC_reg_01 reg_01;
|
|
union IO_APIC_reg_02 reg_02;
|
|
union IO_APIC_reg_03 reg_03;
|
|
unsigned long flags;
|
|
struct irq_cfg *cfg;
|
|
struct irq_desc *desc;
|
|
unsigned int irq;
|
|
|
|
if (apic_verbosity == APIC_QUIET)
|
|
return;
|
|
|
|
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
|
|
for (i = 0; i < nr_ioapics; i++)
|
|
printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
|
|
mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
|
|
|
|
/*
|
|
* We are a bit conservative about what we expect. We have to
|
|
* know about every hardware change ASAP.
|
|
*/
|
|
printk(KERN_INFO "testing the IO APIC.......................\n");
|
|
|
|
for (apic = 0; apic < nr_ioapics; apic++) {
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_00.raw = io_apic_read(apic, 0);
|
|
reg_01.raw = io_apic_read(apic, 1);
|
|
if (reg_01.bits.version >= 0x10)
|
|
reg_02.raw = io_apic_read(apic, 2);
|
|
if (reg_01.bits.version >= 0x20)
|
|
reg_03.raw = io_apic_read(apic, 3);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
printk("\n");
|
|
printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
|
|
printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
|
|
printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
|
|
printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type);
|
|
printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS);
|
|
|
|
printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01);
|
|
printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries);
|
|
|
|
printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ);
|
|
printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version);
|
|
|
|
/*
|
|
* Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
|
|
* but the value of reg_02 is read as the previous read register
|
|
* value, so ignore it if reg_02 == reg_01.
|
|
*/
|
|
if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
|
|
printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
|
|
printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration);
|
|
}
|
|
|
|
/*
|
|
* Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
|
|
* or reg_03, but the value of reg_0[23] is read as the previous read
|
|
* register value, so ignore it if reg_03 == reg_0[12].
|
|
*/
|
|
if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
|
|
reg_03.raw != reg_01.raw) {
|
|
printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
|
|
printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT);
|
|
}
|
|
|
|
printk(KERN_DEBUG ".... IRQ redirection table:\n");
|
|
|
|
printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
|
|
" Stat Dmod Deli Vect: \n");
|
|
|
|
for (i = 0; i <= reg_01.bits.entries; i++) {
|
|
struct IO_APIC_route_entry entry;
|
|
|
|
entry = ioapic_read_entry(apic, i);
|
|
|
|
printk(KERN_DEBUG " %02x %03X ",
|
|
i,
|
|
entry.dest
|
|
);
|
|
|
|
printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
|
|
entry.mask,
|
|
entry.trigger,
|
|
entry.irr,
|
|
entry.polarity,
|
|
entry.delivery_status,
|
|
entry.dest_mode,
|
|
entry.delivery_mode,
|
|
entry.vector
|
|
);
|
|
}
|
|
}
|
|
printk(KERN_DEBUG "IRQ to pin mappings:\n");
|
|
for_each_irq_desc(irq, desc) {
|
|
struct irq_pin_list *entry;
|
|
|
|
cfg = desc->chip_data;
|
|
entry = cfg->irq_2_pin;
|
|
if (!entry)
|
|
continue;
|
|
printk(KERN_DEBUG "IRQ%d ", irq);
|
|
for (;;) {
|
|
printk("-> %d:%d", entry->apic, entry->pin);
|
|
if (!entry->next)
|
|
break;
|
|
entry = entry->next;
|
|
}
|
|
printk("\n");
|
|
}
|
|
|
|
printk(KERN_INFO ".................................... done.\n");
|
|
|
|
return;
|
|
}
|
|
|
|
__apicdebuginit(void) print_APIC_bitfield(int base)
|
|
{
|
|
unsigned int v;
|
|
int i, j;
|
|
|
|
if (apic_verbosity == APIC_QUIET)
|
|
return;
|
|
|
|
printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
|
|
for (i = 0; i < 8; i++) {
|
|
v = apic_read(base + i*0x10);
|
|
for (j = 0; j < 32; j++) {
|
|
if (v & (1<<j))
|
|
printk("1");
|
|
else
|
|
printk("0");
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
__apicdebuginit(void) print_local_APIC(void *dummy)
|
|
{
|
|
unsigned int v, ver, maxlvt;
|
|
u64 icr;
|
|
|
|
if (apic_verbosity == APIC_QUIET)
|
|
return;
|
|
|
|
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
|
|
smp_processor_id(), hard_smp_processor_id());
|
|
v = apic_read(APIC_ID);
|
|
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
|
|
v = apic_read(APIC_LVR);
|
|
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
|
|
ver = GET_APIC_VERSION(v);
|
|
maxlvt = lapic_get_maxlvt();
|
|
|
|
v = apic_read(APIC_TASKPRI);
|
|
printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
|
|
|
|
if (APIC_INTEGRATED(ver)) { /* !82489DX */
|
|
if (!APIC_XAPIC(ver)) {
|
|
v = apic_read(APIC_ARBPRI);
|
|
printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
|
|
v & APIC_ARBPRI_MASK);
|
|
}
|
|
v = apic_read(APIC_PROCPRI);
|
|
printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
|
|
}
|
|
|
|
/*
|
|
* Remote read supported only in the 82489DX and local APIC for
|
|
* Pentium processors.
|
|
*/
|
|
if (!APIC_INTEGRATED(ver) || maxlvt == 3) {
|
|
v = apic_read(APIC_RRR);
|
|
printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
|
|
}
|
|
|
|
v = apic_read(APIC_LDR);
|
|
printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
|
|
if (!x2apic_enabled()) {
|
|
v = apic_read(APIC_DFR);
|
|
printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
|
|
}
|
|
v = apic_read(APIC_SPIV);
|
|
printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
|
|
|
|
printk(KERN_DEBUG "... APIC ISR field:\n");
|
|
print_APIC_bitfield(APIC_ISR);
|
|
printk(KERN_DEBUG "... APIC TMR field:\n");
|
|
print_APIC_bitfield(APIC_TMR);
|
|
printk(KERN_DEBUG "... APIC IRR field:\n");
|
|
print_APIC_bitfield(APIC_IRR);
|
|
|
|
if (APIC_INTEGRATED(ver)) { /* !82489DX */
|
|
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
|
|
apic_write(APIC_ESR, 0);
|
|
|
|
v = apic_read(APIC_ESR);
|
|
printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
|
|
}
|
|
|
|
icr = apic_icr_read();
|
|
printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr);
|
|
printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32));
|
|
|
|
v = apic_read(APIC_LVTT);
|
|
printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
|
|
|
|
if (maxlvt > 3) { /* PC is LVT#4. */
|
|
v = apic_read(APIC_LVTPC);
|
|
printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
|
|
}
|
|
v = apic_read(APIC_LVT0);
|
|
printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
|
|
v = apic_read(APIC_LVT1);
|
|
printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
|
|
|
|
if (maxlvt > 2) { /* ERR is LVT#3. */
|
|
v = apic_read(APIC_LVTERR);
|
|
printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
|
|
}
|
|
|
|
v = apic_read(APIC_TMICT);
|
|
printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
|
|
v = apic_read(APIC_TMCCT);
|
|
printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
|
|
v = apic_read(APIC_TDCR);
|
|
printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
|
|
printk("\n");
|
|
}
|
|
|
|
__apicdebuginit(void) print_all_local_APICs(void)
|
|
{
|
|
int cpu;
|
|
|
|
preempt_disable();
|
|
for_each_online_cpu(cpu)
|
|
smp_call_function_single(cpu, print_local_APIC, NULL, 1);
|
|
preempt_enable();
|
|
}
|
|
|
|
__apicdebuginit(void) print_PIC(void)
|
|
{
|
|
unsigned int v;
|
|
unsigned long flags;
|
|
|
|
if (apic_verbosity == APIC_QUIET)
|
|
return;
|
|
|
|
printk(KERN_DEBUG "\nprinting PIC contents\n");
|
|
|
|
spin_lock_irqsave(&i8259A_lock, flags);
|
|
|
|
v = inb(0xa1) << 8 | inb(0x21);
|
|
printk(KERN_DEBUG "... PIC IMR: %04x\n", v);
|
|
|
|
v = inb(0xa0) << 8 | inb(0x20);
|
|
printk(KERN_DEBUG "... PIC IRR: %04x\n", v);
|
|
|
|
outb(0x0b,0xa0);
|
|
outb(0x0b,0x20);
|
|
v = inb(0xa0) << 8 | inb(0x20);
|
|
outb(0x0a,0xa0);
|
|
outb(0x0a,0x20);
|
|
|
|
spin_unlock_irqrestore(&i8259A_lock, flags);
|
|
|
|
printk(KERN_DEBUG "... PIC ISR: %04x\n", v);
|
|
|
|
v = inb(0x4d1) << 8 | inb(0x4d0);
|
|
printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
|
|
}
|
|
|
|
__apicdebuginit(int) print_all_ICs(void)
|
|
{
|
|
print_PIC();
|
|
print_all_local_APICs();
|
|
print_IO_APIC();
|
|
|
|
return 0;
|
|
}
|
|
|
|
fs_initcall(print_all_ICs);
|
|
|
|
|
|
/* Where if anywhere is the i8259 connect in external int mode */
|
|
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
|
|
|
|
void __init enable_IO_APIC(void)
|
|
{
|
|
union IO_APIC_reg_01 reg_01;
|
|
int i8259_apic, i8259_pin;
|
|
int apic;
|
|
unsigned long flags;
|
|
|
|
#ifdef CONFIG_X86_32
|
|
int i;
|
|
if (!pirqs_enabled)
|
|
for (i = 0; i < MAX_PIRQS; i++)
|
|
pirq_entries[i] = -1;
|
|
#endif
|
|
|
|
/*
|
|
* The number of IO-APIC IRQ registers (== #pins):
|
|
*/
|
|
for (apic = 0; apic < nr_ioapics; apic++) {
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_01.raw = io_apic_read(apic, 1);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
nr_ioapic_registers[apic] = reg_01.bits.entries+1;
|
|
}
|
|
for(apic = 0; apic < nr_ioapics; apic++) {
|
|
int pin;
|
|
/* See if any of the pins is in ExtINT mode */
|
|
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
|
|
struct IO_APIC_route_entry entry;
|
|
entry = ioapic_read_entry(apic, pin);
|
|
|
|
/* If the interrupt line is enabled and in ExtInt mode
|
|
* I have found the pin where the i8259 is connected.
|
|
*/
|
|
if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
|
|
ioapic_i8259.apic = apic;
|
|
ioapic_i8259.pin = pin;
|
|
goto found_i8259;
|
|
}
|
|
}
|
|
}
|
|
found_i8259:
|
|
/* Look to see what if the MP table has reported the ExtINT */
|
|
/* If we could not find the appropriate pin by looking at the ioapic
|
|
* the i8259 probably is not connected the ioapic but give the
|
|
* mptable a chance anyway.
|
|
*/
|
|
i8259_pin = find_isa_irq_pin(0, mp_ExtINT);
|
|
i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
|
|
/* Trust the MP table if nothing is setup in the hardware */
|
|
if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
|
|
printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
|
|
ioapic_i8259.pin = i8259_pin;
|
|
ioapic_i8259.apic = i8259_apic;
|
|
}
|
|
/* Complain if the MP table and the hardware disagree */
|
|
if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
|
|
(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
|
|
{
|
|
printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
|
|
}
|
|
|
|
/*
|
|
* Do not trust the IO-APIC being empty at bootup
|
|
*/
|
|
clear_IO_APIC();
|
|
}
|
|
|
|
/*
|
|
* Not an __init, needed by the reboot code
|
|
*/
|
|
void disable_IO_APIC(void)
|
|
{
|
|
/*
|
|
* Clear the IO-APIC before rebooting:
|
|
*/
|
|
clear_IO_APIC();
|
|
|
|
/*
|
|
* If the i8259 is routed through an IOAPIC
|
|
* Put that IOAPIC in virtual wire mode
|
|
* so legacy interrupts can be delivered.
|
|
*/
|
|
if (ioapic_i8259.pin != -1) {
|
|
struct IO_APIC_route_entry entry;
|
|
|
|
memset(&entry, 0, sizeof(entry));
|
|
entry.mask = 0; /* Enabled */
|
|
entry.trigger = 0; /* Edge */
|
|
entry.irr = 0;
|
|
entry.polarity = 0; /* High */
|
|
entry.delivery_status = 0;
|
|
entry.dest_mode = 0; /* Physical */
|
|
entry.delivery_mode = dest_ExtINT; /* ExtInt */
|
|
entry.vector = 0;
|
|
entry.dest = read_apic_id();
|
|
|
|
/*
|
|
* Add it to the IO-APIC irq-routing table:
|
|
*/
|
|
ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
|
|
}
|
|
|
|
disconnect_bsp_APIC(ioapic_i8259.pin != -1);
|
|
}
|
|
|
|
#ifdef CONFIG_X86_32
|
|
/*
|
|
* function to set the IO-APIC physical IDs based on the
|
|
* values stored in the MPC table.
|
|
*
|
|
* by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
|
|
*/
|
|
|
|
static void __init setup_ioapic_ids_from_mpc(void)
|
|
{
|
|
union IO_APIC_reg_00 reg_00;
|
|
physid_mask_t phys_id_present_map;
|
|
int apic;
|
|
int i;
|
|
unsigned char old_id;
|
|
unsigned long flags;
|
|
|
|
if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
|
|
return;
|
|
|
|
/*
|
|
* Don't check I/O APIC IDs for xAPIC systems. They have
|
|
* no meaning without the serial APIC bus.
|
|
*/
|
|
if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
|
|
|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
|
|
return;
|
|
/*
|
|
* This is broken; anything with a real cpu count has to
|
|
* circumvent this idiocy regardless.
|
|
*/
|
|
phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
|
|
|
|
/*
|
|
* Set the IOAPIC ID to the value stored in the MPC table.
|
|
*/
|
|
for (apic = 0; apic < nr_ioapics; apic++) {
|
|
|
|
/* Read the register 0 value */
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_00.raw = io_apic_read(apic, 0);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
old_id = mp_ioapics[apic].mp_apicid;
|
|
|
|
if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
|
|
printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
|
|
apic, mp_ioapics[apic].mp_apicid);
|
|
printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
|
|
reg_00.bits.ID);
|
|
mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
|
|
}
|
|
|
|
/*
|
|
* Sanity check, is the ID really free? Every APIC in a
|
|
* system must have a unique ID or we get lots of nice
|
|
* 'stuck on smp_invalidate_needed IPI wait' messages.
|
|
*/
|
|
if (check_apicid_used(phys_id_present_map,
|
|
mp_ioapics[apic].mp_apicid)) {
|
|
printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
|
|
apic, mp_ioapics[apic].mp_apicid);
|
|
for (i = 0; i < get_physical_broadcast(); i++)
|
|
if (!physid_isset(i, phys_id_present_map))
|
|
break;
|
|
if (i >= get_physical_broadcast())
|
|
panic("Max APIC ID exceeded!\n");
|
|
printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
|
|
i);
|
|
physid_set(i, phys_id_present_map);
|
|
mp_ioapics[apic].mp_apicid = i;
|
|
} else {
|
|
physid_mask_t tmp;
|
|
tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
|
|
apic_printk(APIC_VERBOSE, "Setting %d in the "
|
|
"phys_id_present_map\n",
|
|
mp_ioapics[apic].mp_apicid);
|
|
physids_or(phys_id_present_map, phys_id_present_map, tmp);
|
|
}
|
|
|
|
|
|
/*
|
|
* We need to adjust the IRQ routing table
|
|
* if the ID changed.
|
|
*/
|
|
if (old_id != mp_ioapics[apic].mp_apicid)
|
|
for (i = 0; i < mp_irq_entries; i++)
|
|
if (mp_irqs[i].mp_dstapic == old_id)
|
|
mp_irqs[i].mp_dstapic
|
|
= mp_ioapics[apic].mp_apicid;
|
|
|
|
/*
|
|
* Read the right value from the MPC table and
|
|
* write it into the ID register.
|
|
*/
|
|
apic_printk(APIC_VERBOSE, KERN_INFO
|
|
"...changing IO-APIC physical APIC ID to %d ...",
|
|
mp_ioapics[apic].mp_apicid);
|
|
|
|
reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
io_apic_write(apic, 0, reg_00.raw);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
/*
|
|
* Sanity check
|
|
*/
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_00.raw = io_apic_read(apic, 0);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
|
|
printk("could not set ID!\n");
|
|
else
|
|
apic_printk(APIC_VERBOSE, " ok.\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int no_timer_check __initdata;
|
|
|
|
static int __init notimercheck(char *s)
|
|
{
|
|
no_timer_check = 1;
|
|
return 1;
|
|
}
|
|
__setup("no_timer_check", notimercheck);
|
|
|
|
/*
|
|
* There is a nasty bug in some older SMP boards, their mptable lies
|
|
* about the timer IRQ. We do the following to work around the situation:
|
|
*
|
|
* - timer IRQ defaults to IO-APIC IRQ
|
|
* - if this function detects that timer IRQs are defunct, then we fall
|
|
* back to ISA timer IRQs
|
|
*/
|
|
static int __init timer_irq_works(void)
|
|
{
|
|
unsigned long t1 = jiffies;
|
|
unsigned long flags;
|
|
|
|
if (no_timer_check)
|
|
return 1;
|
|
|
|
local_save_flags(flags);
|
|
local_irq_enable();
|
|
/* Let ten ticks pass... */
|
|
mdelay((10 * 1000) / HZ);
|
|
local_irq_restore(flags);
|
|
|
|
/*
|
|
* Expect a few ticks at least, to be sure some possible
|
|
* glue logic does not lock up after one or two first
|
|
* ticks in a non-ExtINT mode. Also the local APIC
|
|
* might have cached one ExtINT interrupt. Finally, at
|
|
* least one tick may be lost due to delays.
|
|
*/
|
|
|
|
/* jiffies wrap? */
|
|
if (time_after(jiffies, t1 + 4))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* In the SMP+IOAPIC case it might happen that there are an unspecified
|
|
* number of pending IRQ events unhandled. These cases are very rare,
|
|
* so we 'resend' these IRQs via IPIs, to the same CPU. It's much
|
|
* better to do it this way as thus we do not have to be aware of
|
|
* 'pending' interrupts in the IRQ path, except at this point.
|
|
*/
|
|
/*
|
|
* Edge triggered needs to resend any interrupt
|
|
* that was delayed but this is now handled in the device
|
|
* independent code.
|
|
*/
|
|
|
|
/*
|
|
* Starting up a edge-triggered IO-APIC interrupt is
|
|
* nasty - we need to make sure that we get the edge.
|
|
* If it is already asserted for some reason, we need
|
|
* return 1 to indicate that is was pending.
|
|
*
|
|
* This is not complete - we should be able to fake
|
|
* an edge even if it isn't on the 8259A...
|
|
*/
|
|
|
|
static unsigned int startup_ioapic_irq(unsigned int irq)
|
|
{
|
|
int was_pending = 0;
|
|
unsigned long flags;
|
|
struct irq_cfg *cfg;
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
if (irq < NR_IRQS_LEGACY) {
|
|
disable_8259A_irq(irq);
|
|
if (i8259A_irq_pending(irq))
|
|
was_pending = 1;
|
|
}
|
|
cfg = irq_cfg(irq);
|
|
__unmask_IO_APIC_irq(cfg);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
return was_pending;
|
|
}
|
|
|
|
#ifdef CONFIG_X86_64
|
|
static int ioapic_retrigger_irq(unsigned int irq)
|
|
{
|
|
|
|
struct irq_cfg *cfg = irq_cfg(irq);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&vector_lock, flags);
|
|
send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector);
|
|
spin_unlock_irqrestore(&vector_lock, flags);
|
|
|
|
return 1;
|
|
}
|
|
#else
|
|
static int ioapic_retrigger_irq(unsigned int irq)
|
|
{
|
|
send_IPI_self(irq_cfg(irq)->vector);
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Level and edge triggered IO-APIC interrupts need different handling,
|
|
* so we use two separate IRQ descriptors. Edge triggered IRQs can be
|
|
* handled with the level-triggered descriptor, but that one has slightly
|
|
* more overhead. Level-triggered interrupts cannot be handled with the
|
|
* edge-triggered handler, without risking IRQ storms and other ugly
|
|
* races.
|
|
*/
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
static void ir_irq_migration(struct work_struct *work);
|
|
|
|
static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
|
|
|
|
/*
|
|
* Migrate the IO-APIC irq in the presence of intr-remapping.
|
|
*
|
|
* For edge triggered, irq migration is a simple atomic update(of vector
|
|
* and cpu destination) of IRTE and flush the hardware cache.
|
|
*
|
|
* For level triggered, we need to modify the io-apic RTE aswell with the update
|
|
* vector information, along with modifying IRTE with vector and destination.
|
|
* So irq migration for level triggered is little bit more complex compared to
|
|
* edge triggered migration. But the good news is, we use the same algorithm
|
|
* for level triggered migration as we have today, only difference being,
|
|
* we now initiate the irq migration from process context instead of the
|
|
* interrupt context.
|
|
*
|
|
* In future, when we do a directed EOI (combined with cpu EOI broadcast
|
|
* suppression) to the IO-APIC, level triggered irq migration will also be
|
|
* as simple as edge triggered migration and we can do the irq migration
|
|
* with a simple atomic update to IO-APIC RTE.
|
|
*/
|
|
static void
|
|
migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
struct irte irte;
|
|
int modify_ioapic_rte;
|
|
unsigned int dest;
|
|
unsigned long flags;
|
|
unsigned int irq;
|
|
|
|
if (!cpumask_intersects(mask, cpu_online_mask))
|
|
return;
|
|
|
|
irq = desc->irq;
|
|
if (get_irte(irq, &irte))
|
|
return;
|
|
|
|
cfg = desc->chip_data;
|
|
if (assign_irq_vector(irq, cfg, mask))
|
|
return;
|
|
|
|
set_extra_move_desc(desc, mask);
|
|
|
|
dest = cpu_mask_to_apicid_and(cfg->domain, mask);
|
|
|
|
modify_ioapic_rte = desc->status & IRQ_LEVEL;
|
|
if (modify_ioapic_rte) {
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
__target_IO_APIC_irq(irq, dest, cfg);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
}
|
|
|
|
irte.vector = cfg->vector;
|
|
irte.dest_id = IRTE_DEST(dest);
|
|
|
|
/*
|
|
* Modified the IRTE and flushes the Interrupt entry cache.
|
|
*/
|
|
modify_irte(irq, &irte);
|
|
|
|
if (cfg->move_in_progress)
|
|
send_cleanup_vector(cfg);
|
|
|
|
cpumask_copy(&desc->affinity, mask);
|
|
}
|
|
|
|
static int migrate_irq_remapped_level_desc(struct irq_desc *desc)
|
|
{
|
|
int ret = -1;
|
|
struct irq_cfg *cfg = desc->chip_data;
|
|
|
|
mask_IO_APIC_irq_desc(desc);
|
|
|
|
if (io_apic_level_ack_pending(cfg)) {
|
|
/*
|
|
* Interrupt in progress. Migrating irq now will change the
|
|
* vector information in the IO-APIC RTE and that will confuse
|
|
* the EOI broadcast performed by cpu.
|
|
* So, delay the irq migration to the next instance.
|
|
*/
|
|
schedule_delayed_work(&ir_migration_work, 1);
|
|
goto unmask;
|
|
}
|
|
|
|
/* everthing is clear. we have right of way */
|
|
migrate_ioapic_irq_desc(desc, &desc->pending_mask);
|
|
|
|
ret = 0;
|
|
desc->status &= ~IRQ_MOVE_PENDING;
|
|
cpumask_clear(&desc->pending_mask);
|
|
|
|
unmask:
|
|
unmask_IO_APIC_irq_desc(desc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ir_irq_migration(struct work_struct *work)
|
|
{
|
|
unsigned int irq;
|
|
struct irq_desc *desc;
|
|
|
|
for_each_irq_desc(irq, desc) {
|
|
if (desc->status & IRQ_MOVE_PENDING) {
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
if (!desc->chip->set_affinity ||
|
|
!(desc->status & IRQ_MOVE_PENDING)) {
|
|
desc->status &= ~IRQ_MOVE_PENDING;
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
continue;
|
|
}
|
|
|
|
desc->chip->set_affinity(irq, &desc->pending_mask);
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Migrates the IRQ destination in the process context.
|
|
*/
|
|
static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
|
|
const struct cpumask *mask)
|
|
{
|
|
if (desc->status & IRQ_LEVEL) {
|
|
desc->status |= IRQ_MOVE_PENDING;
|
|
cpumask_copy(&desc->pending_mask, mask);
|
|
migrate_irq_remapped_level_desc(desc);
|
|
return;
|
|
}
|
|
|
|
migrate_ioapic_irq_desc(desc, mask);
|
|
}
|
|
static void set_ir_ioapic_affinity_irq(unsigned int irq,
|
|
const struct cpumask *mask)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
|
|
set_ir_ioapic_affinity_irq_desc(desc, mask);
|
|
}
|
|
#endif
|
|
|
|
asmlinkage void smp_irq_move_cleanup_interrupt(void)
|
|
{
|
|
unsigned vector, me;
|
|
|
|
ack_APIC_irq();
|
|
exit_idle();
|
|
irq_enter();
|
|
|
|
me = smp_processor_id();
|
|
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
|
|
unsigned int irq;
|
|
struct irq_desc *desc;
|
|
struct irq_cfg *cfg;
|
|
irq = __get_cpu_var(vector_irq)[vector];
|
|
|
|
if (irq == -1)
|
|
continue;
|
|
|
|
desc = irq_to_desc(irq);
|
|
if (!desc)
|
|
continue;
|
|
|
|
cfg = irq_cfg(irq);
|
|
spin_lock(&desc->lock);
|
|
if (!cfg->move_cleanup_count)
|
|
goto unlock;
|
|
|
|
if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
|
|
goto unlock;
|
|
|
|
__get_cpu_var(vector_irq)[vector] = -1;
|
|
cfg->move_cleanup_count--;
|
|
unlock:
|
|
spin_unlock(&desc->lock);
|
|
}
|
|
|
|
irq_exit();
|
|
}
|
|
|
|
static void irq_complete_move(struct irq_desc **descp)
|
|
{
|
|
struct irq_desc *desc = *descp;
|
|
struct irq_cfg *cfg = desc->chip_data;
|
|
unsigned vector, me;
|
|
|
|
if (likely(!cfg->move_in_progress)) {
|
|
#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
|
|
if (likely(!cfg->move_desc_pending))
|
|
return;
|
|
|
|
/* domain has not changed, but affinity did */
|
|
me = smp_processor_id();
|
|
if (cpu_isset(me, desc->affinity)) {
|
|
*descp = desc = move_irq_desc(desc, me);
|
|
/* get the new one */
|
|
cfg = desc->chip_data;
|
|
cfg->move_desc_pending = 0;
|
|
}
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
vector = ~get_irq_regs()->orig_ax;
|
|
me = smp_processor_id();
|
|
#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
|
|
*descp = desc = move_irq_desc(desc, me);
|
|
/* get the new one */
|
|
cfg = desc->chip_data;
|
|
#endif
|
|
|
|
if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
|
|
send_cleanup_vector(cfg);
|
|
}
|
|
#else
|
|
static inline void irq_complete_move(struct irq_desc **descp) {}
|
|
#endif
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
static void ack_x2apic_level(unsigned int irq)
|
|
{
|
|
ack_x2APIC_irq();
|
|
}
|
|
|
|
static void ack_x2apic_edge(unsigned int irq)
|
|
{
|
|
ack_x2APIC_irq();
|
|
}
|
|
|
|
#endif
|
|
|
|
static void ack_apic_edge(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
|
|
irq_complete_move(&desc);
|
|
move_native_irq(irq);
|
|
ack_APIC_irq();
|
|
}
|
|
|
|
atomic_t irq_mis_count;
|
|
|
|
static void ack_apic_level(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
|
|
#ifdef CONFIG_X86_32
|
|
unsigned long v;
|
|
int i;
|
|
#endif
|
|
struct irq_cfg *cfg;
|
|
int do_unmask_irq = 0;
|
|
|
|
irq_complete_move(&desc);
|
|
#ifdef CONFIG_GENERIC_PENDING_IRQ
|
|
/* If we are moving the irq we need to mask it */
|
|
if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
|
|
do_unmask_irq = 1;
|
|
mask_IO_APIC_irq_desc(desc);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_X86_32
|
|
/*
|
|
* It appears there is an erratum which affects at least version 0x11
|
|
* of I/O APIC (that's the 82093AA and cores integrated into various
|
|
* chipsets). Under certain conditions a level-triggered interrupt is
|
|
* erroneously delivered as edge-triggered one but the respective IRR
|
|
* bit gets set nevertheless. As a result the I/O unit expects an EOI
|
|
* message but it will never arrive and further interrupts are blocked
|
|
* from the source. The exact reason is so far unknown, but the
|
|
* phenomenon was observed when two consecutive interrupt requests
|
|
* from a given source get delivered to the same CPU and the source is
|
|
* temporarily disabled in between.
|
|
*
|
|
* A workaround is to simulate an EOI message manually. We achieve it
|
|
* by setting the trigger mode to edge and then to level when the edge
|
|
* trigger mode gets detected in the TMR of a local APIC for a
|
|
* level-triggered interrupt. We mask the source for the time of the
|
|
* operation to prevent an edge-triggered interrupt escaping meanwhile.
|
|
* The idea is from Manfred Spraul. --macro
|
|
*/
|
|
cfg = desc->chip_data;
|
|
i = cfg->vector;
|
|
|
|
v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
|
|
#endif
|
|
|
|
/*
|
|
* We must acknowledge the irq before we move it or the acknowledge will
|
|
* not propagate properly.
|
|
*/
|
|
ack_APIC_irq();
|
|
|
|
/* Now we can move and renable the irq */
|
|
if (unlikely(do_unmask_irq)) {
|
|
/* Only migrate the irq if the ack has been received.
|
|
*
|
|
* On rare occasions the broadcast level triggered ack gets
|
|
* delayed going to ioapics, and if we reprogram the
|
|
* vector while Remote IRR is still set the irq will never
|
|
* fire again.
|
|
*
|
|
* To prevent this scenario we read the Remote IRR bit
|
|
* of the ioapic. This has two effects.
|
|
* - On any sane system the read of the ioapic will
|
|
* flush writes (and acks) going to the ioapic from
|
|
* this cpu.
|
|
* - We get to see if the ACK has actually been delivered.
|
|
*
|
|
* Based on failed experiments of reprogramming the
|
|
* ioapic entry from outside of irq context starting
|
|
* with masking the ioapic entry and then polling until
|
|
* Remote IRR was clear before reprogramming the
|
|
* ioapic I don't trust the Remote IRR bit to be
|
|
* completey accurate.
|
|
*
|
|
* However there appears to be no other way to plug
|
|
* this race, so if the Remote IRR bit is not
|
|
* accurate and is causing problems then it is a hardware bug
|
|
* and you can go talk to the chipset vendor about it.
|
|
*/
|
|
cfg = desc->chip_data;
|
|
if (!io_apic_level_ack_pending(cfg))
|
|
move_masked_irq(irq);
|
|
unmask_IO_APIC_irq_desc(desc);
|
|
}
|
|
|
|
#ifdef CONFIG_X86_32
|
|
if (!(v & (1 << (i & 0x1f)))) {
|
|
atomic_inc(&irq_mis_count);
|
|
spin_lock(&ioapic_lock);
|
|
__mask_and_edge_IO_APIC_irq(cfg);
|
|
__unmask_and_level_IO_APIC_irq(cfg);
|
|
spin_unlock(&ioapic_lock);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static struct irq_chip ioapic_chip __read_mostly = {
|
|
.name = "IO-APIC",
|
|
.startup = startup_ioapic_irq,
|
|
.mask = mask_IO_APIC_irq,
|
|
.unmask = unmask_IO_APIC_irq,
|
|
.ack = ack_apic_edge,
|
|
.eoi = ack_apic_level,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = set_ioapic_affinity_irq,
|
|
#endif
|
|
.retrigger = ioapic_retrigger_irq,
|
|
};
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
static struct irq_chip ir_ioapic_chip __read_mostly = {
|
|
.name = "IR-IO-APIC",
|
|
.startup = startup_ioapic_irq,
|
|
.mask = mask_IO_APIC_irq,
|
|
.unmask = unmask_IO_APIC_irq,
|
|
.ack = ack_x2apic_edge,
|
|
.eoi = ack_x2apic_level,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = set_ir_ioapic_affinity_irq,
|
|
#endif
|
|
.retrigger = ioapic_retrigger_irq,
|
|
};
|
|
#endif
|
|
|
|
static inline void init_IO_APIC_traps(void)
|
|
{
|
|
int irq;
|
|
struct irq_desc *desc;
|
|
struct irq_cfg *cfg;
|
|
|
|
/*
|
|
* NOTE! The local APIC isn't very good at handling
|
|
* multiple interrupts at the same interrupt level.
|
|
* As the interrupt level is determined by taking the
|
|
* vector number and shifting that right by 4, we
|
|
* want to spread these out a bit so that they don't
|
|
* all fall in the same interrupt level.
|
|
*
|
|
* Also, we've got to be careful not to trash gate
|
|
* 0x80, because int 0x80 is hm, kind of importantish. ;)
|
|
*/
|
|
for_each_irq_desc(irq, desc) {
|
|
cfg = desc->chip_data;
|
|
if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) {
|
|
/*
|
|
* Hmm.. We don't have an entry for this,
|
|
* so default to an old-fashioned 8259
|
|
* interrupt if we can..
|
|
*/
|
|
if (irq < NR_IRQS_LEGACY)
|
|
make_8259A_irq(irq);
|
|
else
|
|
/* Strange. Oh, well.. */
|
|
desc->chip = &no_irq_chip;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The local APIC irq-chip implementation:
|
|
*/
|
|
|
|
static void mask_lapic_irq(unsigned int irq)
|
|
{
|
|
unsigned long v;
|
|
|
|
v = apic_read(APIC_LVT0);
|
|
apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
|
|
}
|
|
|
|
static void unmask_lapic_irq(unsigned int irq)
|
|
{
|
|
unsigned long v;
|
|
|
|
v = apic_read(APIC_LVT0);
|
|
apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
|
|
}
|
|
|
|
static void ack_lapic_irq(unsigned int irq)
|
|
{
|
|
ack_APIC_irq();
|
|
}
|
|
|
|
static struct irq_chip lapic_chip __read_mostly = {
|
|
.name = "local-APIC",
|
|
.mask = mask_lapic_irq,
|
|
.unmask = unmask_lapic_irq,
|
|
.ack = ack_lapic_irq,
|
|
};
|
|
|
|
static void lapic_register_intr(int irq, struct irq_desc *desc)
|
|
{
|
|
desc->status &= ~IRQ_LEVEL;
|
|
set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
|
|
"edge");
|
|
}
|
|
|
|
static void __init setup_nmi(void)
|
|
{
|
|
/*
|
|
* Dirty trick to enable the NMI watchdog ...
|
|
* We put the 8259A master into AEOI mode and
|
|
* unmask on all local APICs LVT0 as NMI.
|
|
*
|
|
* The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
|
|
* is from Maciej W. Rozycki - so we do not have to EOI from
|
|
* the NMI handler or the timer interrupt.
|
|
*/
|
|
apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
|
|
|
|
enable_NMI_through_LVT0();
|
|
|
|
apic_printk(APIC_VERBOSE, " done.\n");
|
|
}
|
|
|
|
/*
|
|
* This looks a bit hackish but it's about the only one way of sending
|
|
* a few INTA cycles to 8259As and any associated glue logic. ICR does
|
|
* not support the ExtINT mode, unfortunately. We need to send these
|
|
* cycles as some i82489DX-based boards have glue logic that keeps the
|
|
* 8259A interrupt line asserted until INTA. --macro
|
|
*/
|
|
static inline void __init unlock_ExtINT_logic(void)
|
|
{
|
|
int apic, pin, i;
|
|
struct IO_APIC_route_entry entry0, entry1;
|
|
unsigned char save_control, save_freq_select;
|
|
|
|
pin = find_isa_irq_pin(8, mp_INT);
|
|
if (pin == -1) {
|
|
WARN_ON_ONCE(1);
|
|
return;
|
|
}
|
|
apic = find_isa_irq_apic(8, mp_INT);
|
|
if (apic == -1) {
|
|
WARN_ON_ONCE(1);
|
|
return;
|
|
}
|
|
|
|
entry0 = ioapic_read_entry(apic, pin);
|
|
clear_IO_APIC_pin(apic, pin);
|
|
|
|
memset(&entry1, 0, sizeof(entry1));
|
|
|
|
entry1.dest_mode = 0; /* physical delivery */
|
|
entry1.mask = 0; /* unmask IRQ now */
|
|
entry1.dest = hard_smp_processor_id();
|
|
entry1.delivery_mode = dest_ExtINT;
|
|
entry1.polarity = entry0.polarity;
|
|
entry1.trigger = 0;
|
|
entry1.vector = 0;
|
|
|
|
ioapic_write_entry(apic, pin, entry1);
|
|
|
|
save_control = CMOS_READ(RTC_CONTROL);
|
|
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
|
|
CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
|
|
RTC_FREQ_SELECT);
|
|
CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
|
|
|
|
i = 100;
|
|
while (i-- > 0) {
|
|
mdelay(10);
|
|
if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
|
|
i -= 10;
|
|
}
|
|
|
|
CMOS_WRITE(save_control, RTC_CONTROL);
|
|
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
|
|
clear_IO_APIC_pin(apic, pin);
|
|
|
|
ioapic_write_entry(apic, pin, entry0);
|
|
}
|
|
|
|
static int disable_timer_pin_1 __initdata;
|
|
/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
|
|
static int __init disable_timer_pin_setup(char *arg)
|
|
{
|
|
disable_timer_pin_1 = 1;
|
|
return 0;
|
|
}
|
|
early_param("disable_timer_pin_1", disable_timer_pin_setup);
|
|
|
|
int timer_through_8259 __initdata;
|
|
|
|
/*
|
|
* This code may look a bit paranoid, but it's supposed to cooperate with
|
|
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
|
|
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
|
|
* fanatically on his truly buggy board.
|
|
*
|
|
* FIXME: really need to revamp this for all platforms.
|
|
*/
|
|
static inline void __init check_timer(void)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(0);
|
|
struct irq_cfg *cfg = desc->chip_data;
|
|
int cpu = boot_cpu_id;
|
|
int apic1, pin1, apic2, pin2;
|
|
unsigned long flags;
|
|
unsigned int ver;
|
|
int no_pin1 = 0;
|
|
|
|
local_irq_save(flags);
|
|
|
|
ver = apic_read(APIC_LVR);
|
|
ver = GET_APIC_VERSION(ver);
|
|
|
|
/*
|
|
* get/set the timer IRQ vector:
|
|
*/
|
|
disable_8259A_irq(0);
|
|
assign_irq_vector(0, cfg, TARGET_CPUS);
|
|
|
|
/*
|
|
* As IRQ0 is to be enabled in the 8259A, the virtual
|
|
* wire has to be disabled in the local APIC. Also
|
|
* timer interrupts need to be acknowledged manually in
|
|
* the 8259A for the i82489DX when using the NMI
|
|
* watchdog as that APIC treats NMIs as level-triggered.
|
|
* The AEOI mode will finish them in the 8259A
|
|
* automatically.
|
|
*/
|
|
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
|
|
init_8259A(1);
|
|
#ifdef CONFIG_X86_32
|
|
timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
|
|
#endif
|
|
|
|
pin1 = find_isa_irq_pin(0, mp_INT);
|
|
apic1 = find_isa_irq_apic(0, mp_INT);
|
|
pin2 = ioapic_i8259.pin;
|
|
apic2 = ioapic_i8259.apic;
|
|
|
|
apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
|
|
"apic1=%d pin1=%d apic2=%d pin2=%d\n",
|
|
cfg->vector, apic1, pin1, apic2, pin2);
|
|
|
|
/*
|
|
* Some BIOS writers are clueless and report the ExtINTA
|
|
* I/O APIC input from the cascaded 8259A as the timer
|
|
* interrupt input. So just in case, if only one pin
|
|
* was found above, try it both directly and through the
|
|
* 8259A.
|
|
*/
|
|
if (pin1 == -1) {
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (intr_remapping_enabled)
|
|
panic("BIOS bug: timer not connected to IO-APIC");
|
|
#endif
|
|
pin1 = pin2;
|
|
apic1 = apic2;
|
|
no_pin1 = 1;
|
|
} else if (pin2 == -1) {
|
|
pin2 = pin1;
|
|
apic2 = apic1;
|
|
}
|
|
|
|
if (pin1 != -1) {
|
|
/*
|
|
* Ok, does IRQ0 through the IOAPIC work?
|
|
*/
|
|
if (no_pin1) {
|
|
add_pin_to_irq_cpu(cfg, cpu, apic1, pin1);
|
|
setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
|
|
}
|
|
unmask_IO_APIC_irq_desc(desc);
|
|
if (timer_irq_works()) {
|
|
if (nmi_watchdog == NMI_IO_APIC) {
|
|
setup_nmi();
|
|
enable_8259A_irq(0);
|
|
}
|
|
if (disable_timer_pin_1 > 0)
|
|
clear_IO_APIC_pin(0, pin1);
|
|
goto out;
|
|
}
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (intr_remapping_enabled)
|
|
panic("timer doesn't work through Interrupt-remapped IO-APIC");
|
|
#endif
|
|
clear_IO_APIC_pin(apic1, pin1);
|
|
if (!no_pin1)
|
|
apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
|
|
"8254 timer not connected to IO-APIC\n");
|
|
|
|
apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
|
|
"(IRQ0) through the 8259A ...\n");
|
|
apic_printk(APIC_QUIET, KERN_INFO
|
|
"..... (found apic %d pin %d) ...\n", apic2, pin2);
|
|
/*
|
|
* legacy devices should be connected to IO APIC #0
|
|
*/
|
|
replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2);
|
|
setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
|
|
unmask_IO_APIC_irq_desc(desc);
|
|
enable_8259A_irq(0);
|
|
if (timer_irq_works()) {
|
|
apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
|
|
timer_through_8259 = 1;
|
|
if (nmi_watchdog == NMI_IO_APIC) {
|
|
disable_8259A_irq(0);
|
|
setup_nmi();
|
|
enable_8259A_irq(0);
|
|
}
|
|
goto out;
|
|
}
|
|
/*
|
|
* Cleanup, just in case ...
|
|
*/
|
|
disable_8259A_irq(0);
|
|
clear_IO_APIC_pin(apic2, pin2);
|
|
apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
|
|
}
|
|
|
|
if (nmi_watchdog == NMI_IO_APIC) {
|
|
apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
|
|
"through the IO-APIC - disabling NMI Watchdog!\n");
|
|
nmi_watchdog = NMI_NONE;
|
|
}
|
|
#ifdef CONFIG_X86_32
|
|
timer_ack = 0;
|
|
#endif
|
|
|
|
apic_printk(APIC_QUIET, KERN_INFO
|
|
"...trying to set up timer as Virtual Wire IRQ...\n");
|
|
|
|
lapic_register_intr(0, desc);
|
|
apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */
|
|
enable_8259A_irq(0);
|
|
|
|
if (timer_irq_works()) {
|
|
apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
|
|
goto out;
|
|
}
|
|
disable_8259A_irq(0);
|
|
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
|
|
apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
|
|
|
|
apic_printk(APIC_QUIET, KERN_INFO
|
|
"...trying to set up timer as ExtINT IRQ...\n");
|
|
|
|
init_8259A(0);
|
|
make_8259A_irq(0);
|
|
apic_write(APIC_LVT0, APIC_DM_EXTINT);
|
|
|
|
unlock_ExtINT_logic();
|
|
|
|
if (timer_irq_works()) {
|
|
apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
|
|
goto out;
|
|
}
|
|
apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
|
|
panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
|
|
"report. Then try booting with the 'noapic' option.\n");
|
|
out:
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/*
|
|
* Traditionally ISA IRQ2 is the cascade IRQ, and is not available
|
|
* to devices. However there may be an I/O APIC pin available for
|
|
* this interrupt regardless. The pin may be left unconnected, but
|
|
* typically it will be reused as an ExtINT cascade interrupt for
|
|
* the master 8259A. In the MPS case such a pin will normally be
|
|
* reported as an ExtINT interrupt in the MP table. With ACPI
|
|
* there is no provision for ExtINT interrupts, and in the absence
|
|
* of an override it would be treated as an ordinary ISA I/O APIC
|
|
* interrupt, that is edge-triggered and unmasked by default. We
|
|
* used to do this, but it caused problems on some systems because
|
|
* of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
|
|
* the same ExtINT cascade interrupt to drive the local APIC of the
|
|
* bootstrap processor. Therefore we refrain from routing IRQ2 to
|
|
* the I/O APIC in all cases now. No actual device should request
|
|
* it anyway. --macro
|
|
*/
|
|
#define PIC_IRQS (1 << PIC_CASCADE_IR)
|
|
|
|
void __init setup_IO_APIC(void)
|
|
{
|
|
|
|
#ifdef CONFIG_X86_32
|
|
enable_IO_APIC();
|
|
#else
|
|
/*
|
|
* calling enable_IO_APIC() is moved to setup_local_APIC for BP
|
|
*/
|
|
#endif
|
|
|
|
io_apic_irqs = ~PIC_IRQS;
|
|
|
|
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
|
|
/*
|
|
* Set up IO-APIC IRQ routing.
|
|
*/
|
|
#ifdef CONFIG_X86_32
|
|
if (!acpi_ioapic)
|
|
setup_ioapic_ids_from_mpc();
|
|
#endif
|
|
sync_Arb_IDs();
|
|
setup_IO_APIC_irqs();
|
|
init_IO_APIC_traps();
|
|
check_timer();
|
|
}
|
|
|
|
/*
|
|
* Called after all the initialization is done. If we didnt find any
|
|
* APIC bugs then we can allow the modify fast path
|
|
*/
|
|
|
|
static int __init io_apic_bug_finalize(void)
|
|
{
|
|
if (sis_apic_bug == -1)
|
|
sis_apic_bug = 0;
|
|
return 0;
|
|
}
|
|
|
|
late_initcall(io_apic_bug_finalize);
|
|
|
|
struct sysfs_ioapic_data {
|
|
struct sys_device dev;
|
|
struct IO_APIC_route_entry entry[0];
|
|
};
|
|
static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
|
|
|
|
static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
|
|
{
|
|
struct IO_APIC_route_entry *entry;
|
|
struct sysfs_ioapic_data *data;
|
|
int i;
|
|
|
|
data = container_of(dev, struct sysfs_ioapic_data, dev);
|
|
entry = data->entry;
|
|
for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
|
|
*entry = ioapic_read_entry(dev->id, i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioapic_resume(struct sys_device *dev)
|
|
{
|
|
struct IO_APIC_route_entry *entry;
|
|
struct sysfs_ioapic_data *data;
|
|
unsigned long flags;
|
|
union IO_APIC_reg_00 reg_00;
|
|
int i;
|
|
|
|
data = container_of(dev, struct sysfs_ioapic_data, dev);
|
|
entry = data->entry;
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_00.raw = io_apic_read(dev->id, 0);
|
|
if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
|
|
reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
|
|
io_apic_write(dev->id, 0, reg_00.raw);
|
|
}
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
|
|
ioapic_write_entry(dev->id, i, entry[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sysdev_class ioapic_sysdev_class = {
|
|
.name = "ioapic",
|
|
.suspend = ioapic_suspend,
|
|
.resume = ioapic_resume,
|
|
};
|
|
|
|
static int __init ioapic_init_sysfs(void)
|
|
{
|
|
struct sys_device * dev;
|
|
int i, size, error;
|
|
|
|
error = sysdev_class_register(&ioapic_sysdev_class);
|
|
if (error)
|
|
return error;
|
|
|
|
for (i = 0; i < nr_ioapics; i++ ) {
|
|
size = sizeof(struct sys_device) + nr_ioapic_registers[i]
|
|
* sizeof(struct IO_APIC_route_entry);
|
|
mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
|
|
if (!mp_ioapic_data[i]) {
|
|
printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
|
|
continue;
|
|
}
|
|
dev = &mp_ioapic_data[i]->dev;
|
|
dev->id = i;
|
|
dev->cls = &ioapic_sysdev_class;
|
|
error = sysdev_register(dev);
|
|
if (error) {
|
|
kfree(mp_ioapic_data[i]);
|
|
mp_ioapic_data[i] = NULL;
|
|
printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
device_initcall(ioapic_init_sysfs);
|
|
|
|
/*
|
|
* Dynamic irq allocate and deallocation
|
|
*/
|
|
unsigned int create_irq_nr(unsigned int irq_want)
|
|
{
|
|
/* Allocate an unused irq */
|
|
unsigned int irq;
|
|
unsigned int new;
|
|
unsigned long flags;
|
|
struct irq_cfg *cfg_new = NULL;
|
|
int cpu = boot_cpu_id;
|
|
struct irq_desc *desc_new = NULL;
|
|
|
|
irq = 0;
|
|
spin_lock_irqsave(&vector_lock, flags);
|
|
for (new = irq_want; new < NR_IRQS; new++) {
|
|
if (platform_legacy_irq(new))
|
|
continue;
|
|
|
|
desc_new = irq_to_desc_alloc_cpu(new, cpu);
|
|
if (!desc_new) {
|
|
printk(KERN_INFO "can not get irq_desc for %d\n", new);
|
|
continue;
|
|
}
|
|
cfg_new = desc_new->chip_data;
|
|
|
|
if (cfg_new->vector != 0)
|
|
continue;
|
|
if (__assign_irq_vector(new, cfg_new, TARGET_CPUS) == 0)
|
|
irq = new;
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&vector_lock, flags);
|
|
|
|
if (irq > 0) {
|
|
dynamic_irq_init(irq);
|
|
/* restore it, in case dynamic_irq_init clear it */
|
|
if (desc_new)
|
|
desc_new->chip_data = cfg_new;
|
|
}
|
|
return irq;
|
|
}
|
|
|
|
static int nr_irqs_gsi = NR_IRQS_LEGACY;
|
|
int create_irq(void)
|
|
{
|
|
unsigned int irq_want;
|
|
int irq;
|
|
|
|
irq_want = nr_irqs_gsi;
|
|
irq = create_irq_nr(irq_want);
|
|
|
|
if (irq == 0)
|
|
irq = -1;
|
|
|
|
return irq;
|
|
}
|
|
|
|
void destroy_irq(unsigned int irq)
|
|
{
|
|
unsigned long flags;
|
|
struct irq_cfg *cfg;
|
|
struct irq_desc *desc;
|
|
|
|
/* store it, in case dynamic_irq_cleanup clear it */
|
|
desc = irq_to_desc(irq);
|
|
cfg = desc->chip_data;
|
|
dynamic_irq_cleanup(irq);
|
|
/* connect back irq_cfg */
|
|
if (desc)
|
|
desc->chip_data = cfg;
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
free_irte(irq);
|
|
#endif
|
|
spin_lock_irqsave(&vector_lock, flags);
|
|
__clear_irq_vector(irq, cfg);
|
|
spin_unlock_irqrestore(&vector_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* MSI message composition
|
|
*/
|
|
#ifdef CONFIG_PCI_MSI
|
|
static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
int err;
|
|
unsigned dest;
|
|
|
|
cfg = irq_cfg(irq);
|
|
err = assign_irq_vector(irq, cfg, TARGET_CPUS);
|
|
if (err)
|
|
return err;
|
|
|
|
dest = cpu_mask_to_apicid_and(cfg->domain, TARGET_CPUS);
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (irq_remapped(irq)) {
|
|
struct irte irte;
|
|
int ir_index;
|
|
u16 sub_handle;
|
|
|
|
ir_index = map_irq_to_irte_handle(irq, &sub_handle);
|
|
BUG_ON(ir_index == -1);
|
|
|
|
memset (&irte, 0, sizeof(irte));
|
|
|
|
irte.present = 1;
|
|
irte.dst_mode = INT_DEST_MODE;
|
|
irte.trigger_mode = 0; /* edge */
|
|
irte.dlvry_mode = INT_DELIVERY_MODE;
|
|
irte.vector = cfg->vector;
|
|
irte.dest_id = IRTE_DEST(dest);
|
|
|
|
modify_irte(irq, &irte);
|
|
|
|
msg->address_hi = MSI_ADDR_BASE_HI;
|
|
msg->data = sub_handle;
|
|
msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
|
|
MSI_ADDR_IR_SHV |
|
|
MSI_ADDR_IR_INDEX1(ir_index) |
|
|
MSI_ADDR_IR_INDEX2(ir_index);
|
|
} else
|
|
#endif
|
|
{
|
|
msg->address_hi = MSI_ADDR_BASE_HI;
|
|
msg->address_lo =
|
|
MSI_ADDR_BASE_LO |
|
|
((INT_DEST_MODE == 0) ?
|
|
MSI_ADDR_DEST_MODE_PHYSICAL:
|
|
MSI_ADDR_DEST_MODE_LOGICAL) |
|
|
((INT_DELIVERY_MODE != dest_LowestPrio) ?
|
|
MSI_ADDR_REDIRECTION_CPU:
|
|
MSI_ADDR_REDIRECTION_LOWPRI) |
|
|
MSI_ADDR_DEST_ID(dest);
|
|
|
|
msg->data =
|
|
MSI_DATA_TRIGGER_EDGE |
|
|
MSI_DATA_LEVEL_ASSERT |
|
|
((INT_DELIVERY_MODE != dest_LowestPrio) ?
|
|
MSI_DATA_DELIVERY_FIXED:
|
|
MSI_DATA_DELIVERY_LOWPRI) |
|
|
MSI_DATA_VECTOR(cfg->vector);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
struct irq_cfg *cfg;
|
|
struct msi_msg msg;
|
|
unsigned int dest;
|
|
|
|
dest = set_desc_affinity(desc, mask);
|
|
if (dest == BAD_APICID)
|
|
return;
|
|
|
|
cfg = desc->chip_data;
|
|
|
|
read_msi_msg_desc(desc, &msg);
|
|
|
|
msg.data &= ~MSI_DATA_VECTOR_MASK;
|
|
msg.data |= MSI_DATA_VECTOR(cfg->vector);
|
|
msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
|
|
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
|
|
|
|
write_msi_msg_desc(desc, &msg);
|
|
}
|
|
#ifdef CONFIG_INTR_REMAP
|
|
/*
|
|
* Migrate the MSI irq to another cpumask. This migration is
|
|
* done in the process context using interrupt-remapping hardware.
|
|
*/
|
|
static void
|
|
ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
struct irq_cfg *cfg = desc->chip_data;
|
|
unsigned int dest;
|
|
struct irte irte;
|
|
|
|
if (get_irte(irq, &irte))
|
|
return;
|
|
|
|
dest = set_desc_affinity(desc, mask);
|
|
if (dest == BAD_APICID)
|
|
return;
|
|
|
|
irte.vector = cfg->vector;
|
|
irte.dest_id = IRTE_DEST(dest);
|
|
|
|
/*
|
|
* atomically update the IRTE with the new destination and vector.
|
|
*/
|
|
modify_irte(irq, &irte);
|
|
|
|
/*
|
|
* After this point, all the interrupts will start arriving
|
|
* at the new destination. So, time to cleanup the previous
|
|
* vector allocation.
|
|
*/
|
|
if (cfg->move_in_progress)
|
|
send_cleanup_vector(cfg);
|
|
}
|
|
|
|
#endif
|
|
#endif /* CONFIG_SMP */
|
|
|
|
/*
|
|
* IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
|
|
* which implement the MSI or MSI-X Capability Structure.
|
|
*/
|
|
static struct irq_chip msi_chip = {
|
|
.name = "PCI-MSI",
|
|
.unmask = unmask_msi_irq,
|
|
.mask = mask_msi_irq,
|
|
.ack = ack_apic_edge,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = set_msi_irq_affinity,
|
|
#endif
|
|
.retrigger = ioapic_retrigger_irq,
|
|
};
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
static struct irq_chip msi_ir_chip = {
|
|
.name = "IR-PCI-MSI",
|
|
.unmask = unmask_msi_irq,
|
|
.mask = mask_msi_irq,
|
|
.ack = ack_x2apic_edge,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = ir_set_msi_irq_affinity,
|
|
#endif
|
|
.retrigger = ioapic_retrigger_irq,
|
|
};
|
|
|
|
/*
|
|
* Map the PCI dev to the corresponding remapping hardware unit
|
|
* and allocate 'nvec' consecutive interrupt-remapping table entries
|
|
* in it.
|
|
*/
|
|
static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
|
|
{
|
|
struct intel_iommu *iommu;
|
|
int index;
|
|
|
|
iommu = map_dev_to_ir(dev);
|
|
if (!iommu) {
|
|
printk(KERN_ERR
|
|
"Unable to map PCI %s to iommu\n", pci_name(dev));
|
|
return -ENOENT;
|
|
}
|
|
|
|
index = alloc_irte(iommu, irq, nvec);
|
|
if (index < 0) {
|
|
printk(KERN_ERR
|
|
"Unable to allocate %d IRTE for PCI %s\n", nvec,
|
|
pci_name(dev));
|
|
return -ENOSPC;
|
|
}
|
|
return index;
|
|
}
|
|
#endif
|
|
|
|
static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
|
|
{
|
|
int ret;
|
|
struct msi_msg msg;
|
|
|
|
ret = msi_compose_msg(dev, irq, &msg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
set_irq_msi(irq, msidesc);
|
|
write_msi_msg(irq, &msg);
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (irq_remapped(irq)) {
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
/*
|
|
* irq migration in process context
|
|
*/
|
|
desc->status |= IRQ_MOVE_PCNTXT;
|
|
set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
|
|
} else
|
|
#endif
|
|
set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "irq %d for MSI/MSI-X\n", irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc)
|
|
{
|
|
unsigned int irq;
|
|
int ret;
|
|
unsigned int irq_want;
|
|
|
|
irq_want = nr_irqs_gsi;
|
|
irq = create_irq_nr(irq_want);
|
|
if (irq == 0)
|
|
return -1;
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (!intr_remapping_enabled)
|
|
goto no_ir;
|
|
|
|
ret = msi_alloc_irte(dev, irq, 1);
|
|
if (ret < 0)
|
|
goto error;
|
|
no_ir:
|
|
#endif
|
|
ret = setup_msi_irq(dev, msidesc, irq);
|
|
if (ret < 0) {
|
|
destroy_irq(irq);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
error:
|
|
destroy_irq(irq);
|
|
return ret;
|
|
#endif
|
|
}
|
|
|
|
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
|
|
{
|
|
unsigned int irq;
|
|
int ret, sub_handle;
|
|
struct msi_desc *msidesc;
|
|
unsigned int irq_want;
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
struct intel_iommu *iommu = 0;
|
|
int index = 0;
|
|
#endif
|
|
|
|
irq_want = nr_irqs_gsi;
|
|
sub_handle = 0;
|
|
list_for_each_entry(msidesc, &dev->msi_list, list) {
|
|
irq = create_irq_nr(irq_want);
|
|
irq_want++;
|
|
if (irq == 0)
|
|
return -1;
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (!intr_remapping_enabled)
|
|
goto no_ir;
|
|
|
|
if (!sub_handle) {
|
|
/*
|
|
* allocate the consecutive block of IRTE's
|
|
* for 'nvec'
|
|
*/
|
|
index = msi_alloc_irte(dev, irq, nvec);
|
|
if (index < 0) {
|
|
ret = index;
|
|
goto error;
|
|
}
|
|
} else {
|
|
iommu = map_dev_to_ir(dev);
|
|
if (!iommu) {
|
|
ret = -ENOENT;
|
|
goto error;
|
|
}
|
|
/*
|
|
* setup the mapping between the irq and the IRTE
|
|
* base index, the sub_handle pointing to the
|
|
* appropriate interrupt remap table entry.
|
|
*/
|
|
set_irte_irq(irq, iommu, index, sub_handle);
|
|
}
|
|
no_ir:
|
|
#endif
|
|
ret = setup_msi_irq(dev, msidesc, irq);
|
|
if (ret < 0)
|
|
goto error;
|
|
sub_handle++;
|
|
}
|
|
return 0;
|
|
|
|
error:
|
|
destroy_irq(irq);
|
|
return ret;
|
|
}
|
|
|
|
void arch_teardown_msi_irq(unsigned int irq)
|
|
{
|
|
destroy_irq(irq);
|
|
}
|
|
|
|
#ifdef CONFIG_DMAR
|
|
#ifdef CONFIG_SMP
|
|
static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
struct irq_cfg *cfg;
|
|
struct msi_msg msg;
|
|
unsigned int dest;
|
|
|
|
dest = set_desc_affinity(desc, mask);
|
|
if (dest == BAD_APICID)
|
|
return;
|
|
|
|
cfg = desc->chip_data;
|
|
|
|
dmar_msi_read(irq, &msg);
|
|
|
|
msg.data &= ~MSI_DATA_VECTOR_MASK;
|
|
msg.data |= MSI_DATA_VECTOR(cfg->vector);
|
|
msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
|
|
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
|
|
|
|
dmar_msi_write(irq, &msg);
|
|
}
|
|
|
|
#endif /* CONFIG_SMP */
|
|
|
|
struct irq_chip dmar_msi_type = {
|
|
.name = "DMAR_MSI",
|
|
.unmask = dmar_msi_unmask,
|
|
.mask = dmar_msi_mask,
|
|
.ack = ack_apic_edge,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = dmar_msi_set_affinity,
|
|
#endif
|
|
.retrigger = ioapic_retrigger_irq,
|
|
};
|
|
|
|
int arch_setup_dmar_msi(unsigned int irq)
|
|
{
|
|
int ret;
|
|
struct msi_msg msg;
|
|
|
|
ret = msi_compose_msg(NULL, irq, &msg);
|
|
if (ret < 0)
|
|
return ret;
|
|
dmar_msi_write(irq, &msg);
|
|
set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
|
|
"edge");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_HPET_TIMER
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
struct irq_cfg *cfg;
|
|
struct msi_msg msg;
|
|
unsigned int dest;
|
|
|
|
dest = set_desc_affinity(desc, mask);
|
|
if (dest == BAD_APICID)
|
|
return;
|
|
|
|
cfg = desc->chip_data;
|
|
|
|
hpet_msi_read(irq, &msg);
|
|
|
|
msg.data &= ~MSI_DATA_VECTOR_MASK;
|
|
msg.data |= MSI_DATA_VECTOR(cfg->vector);
|
|
msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
|
|
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
|
|
|
|
hpet_msi_write(irq, &msg);
|
|
}
|
|
|
|
#endif /* CONFIG_SMP */
|
|
|
|
struct irq_chip hpet_msi_type = {
|
|
.name = "HPET_MSI",
|
|
.unmask = hpet_msi_unmask,
|
|
.mask = hpet_msi_mask,
|
|
.ack = ack_apic_edge,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = hpet_msi_set_affinity,
|
|
#endif
|
|
.retrigger = ioapic_retrigger_irq,
|
|
};
|
|
|
|
int arch_setup_hpet_msi(unsigned int irq)
|
|
{
|
|
int ret;
|
|
struct msi_msg msg;
|
|
|
|
ret = msi_compose_msg(NULL, irq, &msg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
hpet_msi_write(irq, &msg);
|
|
set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
|
|
"edge");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_PCI_MSI */
|
|
/*
|
|
* Hypertransport interrupt support
|
|
*/
|
|
#ifdef CONFIG_HT_IRQ
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
|
|
{
|
|
struct ht_irq_msg msg;
|
|
fetch_ht_irq_msg(irq, &msg);
|
|
|
|
msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
|
|
msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
|
|
|
|
msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
|
|
msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
|
|
|
|
write_ht_irq_msg(irq, &msg);
|
|
}
|
|
|
|
static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
|
|
{
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
struct irq_cfg *cfg;
|
|
unsigned int dest;
|
|
|
|
dest = set_desc_affinity(desc, mask);
|
|
if (dest == BAD_APICID)
|
|
return;
|
|
|
|
cfg = desc->chip_data;
|
|
|
|
target_ht_irq(irq, dest, cfg->vector);
|
|
}
|
|
|
|
#endif
|
|
|
|
static struct irq_chip ht_irq_chip = {
|
|
.name = "PCI-HT",
|
|
.mask = mask_ht_irq,
|
|
.unmask = unmask_ht_irq,
|
|
.ack = ack_apic_edge,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = set_ht_irq_affinity,
|
|
#endif
|
|
.retrigger = ioapic_retrigger_irq,
|
|
};
|
|
|
|
int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
|
|
{
|
|
struct irq_cfg *cfg;
|
|
int err;
|
|
|
|
cfg = irq_cfg(irq);
|
|
err = assign_irq_vector(irq, cfg, TARGET_CPUS);
|
|
if (!err) {
|
|
struct ht_irq_msg msg;
|
|
unsigned dest;
|
|
|
|
dest = cpu_mask_to_apicid_and(cfg->domain, TARGET_CPUS);
|
|
|
|
msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
|
|
|
|
msg.address_lo =
|
|
HT_IRQ_LOW_BASE |
|
|
HT_IRQ_LOW_DEST_ID(dest) |
|
|
HT_IRQ_LOW_VECTOR(cfg->vector) |
|
|
((INT_DEST_MODE == 0) ?
|
|
HT_IRQ_LOW_DM_PHYSICAL :
|
|
HT_IRQ_LOW_DM_LOGICAL) |
|
|
HT_IRQ_LOW_RQEOI_EDGE |
|
|
((INT_DELIVERY_MODE != dest_LowestPrio) ?
|
|
HT_IRQ_LOW_MT_FIXED :
|
|
HT_IRQ_LOW_MT_ARBITRATED) |
|
|
HT_IRQ_LOW_IRQ_MASKED;
|
|
|
|
write_ht_irq_msg(irq, &msg);
|
|
|
|
set_irq_chip_and_handler_name(irq, &ht_irq_chip,
|
|
handle_edge_irq, "edge");
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq);
|
|
}
|
|
return err;
|
|
}
|
|
#endif /* CONFIG_HT_IRQ */
|
|
|
|
#ifdef CONFIG_X86_64
|
|
/*
|
|
* Re-target the irq to the specified CPU and enable the specified MMR located
|
|
* on the specified blade to allow the sending of MSIs to the specified CPU.
|
|
*/
|
|
int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
|
|
unsigned long mmr_offset)
|
|
{
|
|
const struct cpumask *eligible_cpu = cpumask_of(cpu);
|
|
struct irq_cfg *cfg;
|
|
int mmr_pnode;
|
|
unsigned long mmr_value;
|
|
struct uv_IO_APIC_route_entry *entry;
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
cfg = irq_cfg(irq);
|
|
|
|
err = assign_irq_vector(irq, cfg, eligible_cpu);
|
|
if (err != 0)
|
|
return err;
|
|
|
|
spin_lock_irqsave(&vector_lock, flags);
|
|
set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
|
|
irq_name);
|
|
spin_unlock_irqrestore(&vector_lock, flags);
|
|
|
|
mmr_value = 0;
|
|
entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
|
|
BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
|
|
|
|
entry->vector = cfg->vector;
|
|
entry->delivery_mode = INT_DELIVERY_MODE;
|
|
entry->dest_mode = INT_DEST_MODE;
|
|
entry->polarity = 0;
|
|
entry->trigger = 0;
|
|
entry->mask = 0;
|
|
entry->dest = cpu_mask_to_apicid(eligible_cpu);
|
|
|
|
mmr_pnode = uv_blade_to_pnode(mmr_blade);
|
|
uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
|
|
|
|
return irq;
|
|
}
|
|
|
|
/*
|
|
* Disable the specified MMR located on the specified blade so that MSIs are
|
|
* longer allowed to be sent.
|
|
*/
|
|
void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset)
|
|
{
|
|
unsigned long mmr_value;
|
|
struct uv_IO_APIC_route_entry *entry;
|
|
int mmr_pnode;
|
|
|
|
mmr_value = 0;
|
|
entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
|
|
BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
|
|
|
|
entry->mask = 1;
|
|
|
|
mmr_pnode = uv_blade_to_pnode(mmr_blade);
|
|
uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
|
|
}
|
|
#endif /* CONFIG_X86_64 */
|
|
|
|
int __init io_apic_get_redir_entries (int ioapic)
|
|
{
|
|
union IO_APIC_reg_01 reg_01;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_01.raw = io_apic_read(ioapic, 1);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
return reg_01.bits.entries;
|
|
}
|
|
|
|
void __init probe_nr_irqs_gsi(void)
|
|
{
|
|
int idx;
|
|
int nr = 0;
|
|
|
|
for (idx = 0; idx < nr_ioapics; idx++)
|
|
nr += io_apic_get_redir_entries(idx) + 1;
|
|
|
|
if (nr > nr_irqs_gsi)
|
|
nr_irqs_gsi = nr;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------------
|
|
ACPI-based IOAPIC Configuration
|
|
-------------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_ACPI
|
|
|
|
#ifdef CONFIG_X86_32
|
|
int __init io_apic_get_unique_id(int ioapic, int apic_id)
|
|
{
|
|
union IO_APIC_reg_00 reg_00;
|
|
static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
|
|
physid_mask_t tmp;
|
|
unsigned long flags;
|
|
int i = 0;
|
|
|
|
/*
|
|
* The P4 platform supports up to 256 APIC IDs on two separate APIC
|
|
* buses (one for LAPICs, one for IOAPICs), where predecessors only
|
|
* supports up to 16 on one shared APIC bus.
|
|
*
|
|
* TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
|
|
* advantage of new APIC bus architecture.
|
|
*/
|
|
|
|
if (physids_empty(apic_id_map))
|
|
apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_00.raw = io_apic_read(ioapic, 0);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
if (apic_id >= get_physical_broadcast()) {
|
|
printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
|
|
"%d\n", ioapic, apic_id, reg_00.bits.ID);
|
|
apic_id = reg_00.bits.ID;
|
|
}
|
|
|
|
/*
|
|
* Every APIC in a system must have a unique ID or we get lots of nice
|
|
* 'stuck on smp_invalidate_needed IPI wait' messages.
|
|
*/
|
|
if (check_apicid_used(apic_id_map, apic_id)) {
|
|
|
|
for (i = 0; i < get_physical_broadcast(); i++) {
|
|
if (!check_apicid_used(apic_id_map, i))
|
|
break;
|
|
}
|
|
|
|
if (i == get_physical_broadcast())
|
|
panic("Max apic_id exceeded!\n");
|
|
|
|
printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
|
|
"trying %d\n", ioapic, apic_id, i);
|
|
|
|
apic_id = i;
|
|
}
|
|
|
|
tmp = apicid_to_cpu_present(apic_id);
|
|
physids_or(apic_id_map, apic_id_map, tmp);
|
|
|
|
if (reg_00.bits.ID != apic_id) {
|
|
reg_00.bits.ID = apic_id;
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
io_apic_write(ioapic, 0, reg_00.raw);
|
|
reg_00.raw = io_apic_read(ioapic, 0);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
/* Sanity check */
|
|
if (reg_00.bits.ID != apic_id) {
|
|
printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
apic_printk(APIC_VERBOSE, KERN_INFO
|
|
"IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
|
|
|
|
return apic_id;
|
|
}
|
|
|
|
int __init io_apic_get_version(int ioapic)
|
|
{
|
|
union IO_APIC_reg_01 reg_01;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ioapic_lock, flags);
|
|
reg_01.raw = io_apic_read(ioapic, 1);
|
|
spin_unlock_irqrestore(&ioapic_lock, flags);
|
|
|
|
return reg_01.bits.version;
|
|
}
|
|
#endif
|
|
|
|
int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
|
|
{
|
|
struct irq_desc *desc;
|
|
struct irq_cfg *cfg;
|
|
int cpu = boot_cpu_id;
|
|
|
|
if (!IO_APIC_IRQ(irq)) {
|
|
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
|
|
ioapic);
|
|
return -EINVAL;
|
|
}
|
|
|
|
desc = irq_to_desc_alloc_cpu(irq, cpu);
|
|
if (!desc) {
|
|
printk(KERN_INFO "can not get irq_desc %d\n", irq);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* IRQs < 16 are already in the irq_2_pin[] map
|
|
*/
|
|
if (irq >= NR_IRQS_LEGACY) {
|
|
cfg = desc->chip_data;
|
|
add_pin_to_irq_cpu(cfg, cpu, ioapic, pin);
|
|
}
|
|
|
|
setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
|
|
{
|
|
int i;
|
|
|
|
if (skip_ioapic_setup)
|
|
return -1;
|
|
|
|
for (i = 0; i < mp_irq_entries; i++)
|
|
if (mp_irqs[i].mp_irqtype == mp_INT &&
|
|
mp_irqs[i].mp_srcbusirq == bus_irq)
|
|
break;
|
|
if (i >= mp_irq_entries)
|
|
return -1;
|
|
|
|
*trigger = irq_trigger(i);
|
|
*polarity = irq_polarity(i);
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_ACPI */
|
|
|
|
/*
|
|
* This function currently is only a helper for the i386 smp boot process where
|
|
* we need to reprogram the ioredtbls to cater for the cpus which have come online
|
|
* so mask in all cases should simply be TARGET_CPUS
|
|
*/
|
|
#ifdef CONFIG_SMP
|
|
void __init setup_ioapic_dest(void)
|
|
{
|
|
int pin, ioapic, irq, irq_entry;
|
|
struct irq_desc *desc;
|
|
struct irq_cfg *cfg;
|
|
const struct cpumask *mask;
|
|
|
|
if (skip_ioapic_setup == 1)
|
|
return;
|
|
|
|
for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
|
|
for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
|
|
irq_entry = find_irq_entry(ioapic, pin, mp_INT);
|
|
if (irq_entry == -1)
|
|
continue;
|
|
irq = pin_2_irq(irq_entry, ioapic, pin);
|
|
|
|
/* setup_IO_APIC_irqs could fail to get vector for some device
|
|
* when you have too many devices, because at that time only boot
|
|
* cpu is online.
|
|
*/
|
|
desc = irq_to_desc(irq);
|
|
cfg = desc->chip_data;
|
|
if (!cfg->vector) {
|
|
setup_IO_APIC_irq(ioapic, pin, irq, desc,
|
|
irq_trigger(irq_entry),
|
|
irq_polarity(irq_entry));
|
|
continue;
|
|
|
|
}
|
|
|
|
/*
|
|
* Honour affinities which have been set in early boot
|
|
*/
|
|
if (desc->status &
|
|
(IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
|
|
mask = &desc->affinity;
|
|
else
|
|
mask = TARGET_CPUS;
|
|
|
|
#ifdef CONFIG_INTR_REMAP
|
|
if (intr_remapping_enabled)
|
|
set_ir_ioapic_affinity_irq_desc(desc, mask);
|
|
else
|
|
#endif
|
|
set_ioapic_affinity_irq_desc(desc, mask);
|
|
}
|
|
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#define IOAPIC_RESOURCE_NAME_SIZE 11
|
|
|
|
static struct resource *ioapic_resources;
|
|
|
|
static struct resource * __init ioapic_setup_resources(void)
|
|
{
|
|
unsigned long n;
|
|
struct resource *res;
|
|
char *mem;
|
|
int i;
|
|
|
|
if (nr_ioapics <= 0)
|
|
return NULL;
|
|
|
|
n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
|
|
n *= nr_ioapics;
|
|
|
|
mem = alloc_bootmem(n);
|
|
res = (void *)mem;
|
|
|
|
if (mem != NULL) {
|
|
mem += sizeof(struct resource) * nr_ioapics;
|
|
|
|
for (i = 0; i < nr_ioapics; i++) {
|
|
res[i].name = mem;
|
|
res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
|
|
sprintf(mem, "IOAPIC %u", i);
|
|
mem += IOAPIC_RESOURCE_NAME_SIZE;
|
|
}
|
|
}
|
|
|
|
ioapic_resources = res;
|
|
|
|
return res;
|
|
}
|
|
|
|
void __init ioapic_init_mappings(void)
|
|
{
|
|
unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
|
|
struct resource *ioapic_res;
|
|
int i;
|
|
|
|
ioapic_res = ioapic_setup_resources();
|
|
for (i = 0; i < nr_ioapics; i++) {
|
|
if (smp_found_config) {
|
|
ioapic_phys = mp_ioapics[i].mp_apicaddr;
|
|
#ifdef CONFIG_X86_32
|
|
if (!ioapic_phys) {
|
|
printk(KERN_ERR
|
|
"WARNING: bogus zero IO-APIC "
|
|
"address found in MPTABLE, "
|
|
"disabling IO/APIC support!\n");
|
|
smp_found_config = 0;
|
|
skip_ioapic_setup = 1;
|
|
goto fake_ioapic_page;
|
|
}
|
|
#endif
|
|
} else {
|
|
#ifdef CONFIG_X86_32
|
|
fake_ioapic_page:
|
|
#endif
|
|
ioapic_phys = (unsigned long)
|
|
alloc_bootmem_pages(PAGE_SIZE);
|
|
ioapic_phys = __pa(ioapic_phys);
|
|
}
|
|
set_fixmap_nocache(idx, ioapic_phys);
|
|
apic_printk(APIC_VERBOSE,
|
|
"mapped IOAPIC to %08lx (%08lx)\n",
|
|
__fix_to_virt(idx), ioapic_phys);
|
|
idx++;
|
|
|
|
if (ioapic_res != NULL) {
|
|
ioapic_res->start = ioapic_phys;
|
|
ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
|
|
ioapic_res++;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int __init ioapic_insert_resources(void)
|
|
{
|
|
int i;
|
|
struct resource *r = ioapic_resources;
|
|
|
|
if (!r) {
|
|
printk(KERN_ERR
|
|
"IO APIC resources could be not be allocated.\n");
|
|
return -1;
|
|
}
|
|
|
|
for (i = 0; i < nr_ioapics; i++) {
|
|
insert_resource(&iomem_resource, r);
|
|
r++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Insert the IO APIC resources after PCI initialization has occured to handle
|
|
* IO APICS that are mapped in on a BAR in PCI space. */
|
|
late_initcall(ioapic_insert_resources);
|