8199d3a79c
A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
198 lines
6.0 KiB
Makefile
198 lines
6.0 KiB
Makefile
#
|
|
# Makefile for the Linux network (ethercard) device drivers.
|
|
#
|
|
|
|
ifeq ($(CONFIG_ISDN_PPP),y)
|
|
obj-$(CONFIG_ISDN) += slhc.o
|
|
endif
|
|
|
|
obj-$(CONFIG_E1000) += e1000/
|
|
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
|
|
obj-$(CONFIG_IXGB) += ixgb/
|
|
obj-$(CONFIG_CHELSIO_T1) += chelsio/
|
|
obj-$(CONFIG_BONDING) += bonding/
|
|
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
|
|
|
|
gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_phy.o
|
|
|
|
#
|
|
# link order important here
|
|
#
|
|
obj-$(CONFIG_PLIP) += plip.o
|
|
|
|
obj-$(CONFIG_ROADRUNNER) += rrunner.o
|
|
|
|
obj-$(CONFIG_HAPPYMEAL) += sunhme.o
|
|
obj-$(CONFIG_SUNLANCE) += sunlance.o
|
|
obj-$(CONFIG_SUNQE) += sunqe.o
|
|
obj-$(CONFIG_SUNBMAC) += sunbmac.o
|
|
obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
|
|
obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
|
|
|
|
obj-$(CONFIG_MACE) += mace.o
|
|
obj-$(CONFIG_BMAC) += bmac.o
|
|
|
|
obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
|
|
|
|
obj-$(CONFIG_DGRS) += dgrs.o
|
|
obj-$(CONFIG_VORTEX) += 3c59x.o
|
|
obj-$(CONFIG_TYPHOON) += typhoon.o
|
|
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
|
|
obj-$(CONFIG_PCNET32) += pcnet32.o
|
|
obj-$(CONFIG_EEPRO100) += eepro100.o
|
|
obj-$(CONFIG_E100) += e100.o
|
|
obj-$(CONFIG_TLAN) += tlan.o
|
|
obj-$(CONFIG_EPIC100) += epic100.o
|
|
obj-$(CONFIG_SIS900) += sis900.o
|
|
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
|
|
obj-$(CONFIG_ACENIC) += acenic.o
|
|
obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
|
|
obj-$(CONFIG_NATSEMI) += natsemi.o
|
|
obj-$(CONFIG_NS83820) += ns83820.o
|
|
obj-$(CONFIG_STNIC) += stnic.o 8390.o
|
|
obj-$(CONFIG_FEALNX) += fealnx.o
|
|
obj-$(CONFIG_TIGON3) += tg3.o
|
|
obj-$(CONFIG_TC35815) += tc35815.o
|
|
obj-$(CONFIG_SK98LIN) += sk98lin/
|
|
obj-$(CONFIG_SKFP) += skfp/
|
|
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
|
|
obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
|
|
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
|
|
|
|
#
|
|
# end link order section
|
|
#
|
|
|
|
obj-$(CONFIG_MII) += mii.o
|
|
|
|
obj-$(CONFIG_SUNDANCE) += sundance.o
|
|
obj-$(CONFIG_HAMACHI) += hamachi.o
|
|
obj-$(CONFIG_NET) += Space.o loopback.o
|
|
obj-$(CONFIG_SEEQ8005) += seeq8005.o
|
|
obj-$(CONFIG_NET_SB1000) += sb1000.o
|
|
obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
|
|
obj-$(CONFIG_APNE) += apne.o 8390.o
|
|
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
|
|
obj-$(CONFIG_SHAPER) += shaper.o
|
|
obj-$(CONFIG_SK_G16) += sk_g16.o
|
|
obj-$(CONFIG_HP100) += hp100.o
|
|
obj-$(CONFIG_SMC9194) += smc9194.o
|
|
obj-$(CONFIG_FEC) += fec.o
|
|
obj-$(CONFIG_68360_ENET) += 68360enet.o
|
|
obj-$(CONFIG_ARM_ETHERH) += 8390.o
|
|
obj-$(CONFIG_WD80x3) += wd.o 8390.o
|
|
obj-$(CONFIG_EL2) += 3c503.o 8390.o
|
|
obj-$(CONFIG_NE2000) += ne.o 8390.o
|
|
obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
|
|
obj-$(CONFIG_HPLAN) += hp.o 8390.o
|
|
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
|
|
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
|
|
obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
|
|
obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
|
|
obj-$(CONFIG_E2100) += e2100.o 8390.o
|
|
obj-$(CONFIG_ES3210) += es3210.o 8390.o
|
|
obj-$(CONFIG_LNE390) += lne390.o 8390.o
|
|
obj-$(CONFIG_NE3210) += ne3210.o 8390.o
|
|
obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
|
|
obj-$(CONFIG_B44) += b44.o
|
|
obj-$(CONFIG_FORCEDETH) += forcedeth.o
|
|
obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
|
|
|
|
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
|
|
|
|
obj-$(CONFIG_PPP) += ppp_generic.o slhc.o
|
|
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
|
|
obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
|
|
obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
|
|
obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
|
|
obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
|
|
|
|
obj-$(CONFIG_SLIP) += slip.o
|
|
ifeq ($(CONFIG_SLIP_COMPRESSED),y)
|
|
obj-$(CONFIG_SLIP) += slhc.o
|
|
endif
|
|
|
|
obj-$(CONFIG_DUMMY) += dummy.o
|
|
obj-$(CONFIG_DE600) += de600.o
|
|
obj-$(CONFIG_DE620) += de620.o
|
|
obj-$(CONFIG_LANCE) += lance.o
|
|
obj-$(CONFIG_SUN3_82586) += sun3_82586.o
|
|
obj-$(CONFIG_SUN3LANCE) += sun3lance.o
|
|
obj-$(CONFIG_DEFXX) += defxx.o
|
|
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
|
|
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
|
|
obj-$(CONFIG_AT1700) += at1700.o
|
|
obj-$(CONFIG_FMV18X) += fmv18x.o
|
|
obj-$(CONFIG_EL1) += 3c501.o
|
|
obj-$(CONFIG_EL16) += 3c507.o
|
|
obj-$(CONFIG_ELMC) += 3c523.o
|
|
obj-$(CONFIG_SKMC) += sk_mca.o
|
|
obj-$(CONFIG_IBMLANA) += ibmlana.o
|
|
obj-$(CONFIG_ELMC_II) += 3c527.o
|
|
obj-$(CONFIG_EL3) += 3c509.o
|
|
obj-$(CONFIG_3C515) += 3c515.o
|
|
obj-$(CONFIG_EEXPRESS) += eexpress.o
|
|
obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
|
|
obj-$(CONFIG_8139CP) += 8139cp.o
|
|
obj-$(CONFIG_8139TOO) += 8139too.o
|
|
obj-$(CONFIG_ZNET) += znet.o
|
|
obj-$(CONFIG_LAN_SAA9730) += saa9730.o
|
|
obj-$(CONFIG_DEPCA) += depca.o
|
|
obj-$(CONFIG_EWRK3) += ewrk3.o
|
|
obj-$(CONFIG_ATP) += atp.o
|
|
obj-$(CONFIG_NI5010) += ni5010.o
|
|
obj-$(CONFIG_NI52) += ni52.o
|
|
obj-$(CONFIG_NI65) += ni65.o
|
|
obj-$(CONFIG_ELPLUS) += 3c505.o
|
|
obj-$(CONFIG_AC3200) += ac3200.o 8390.o
|
|
obj-$(CONFIG_APRICOT) += 82596.o
|
|
obj-$(CONFIG_LASI_82596) += lasi_82596.o
|
|
obj-$(CONFIG_MVME16x_NET) += 82596.o
|
|
obj-$(CONFIG_BVME6000_NET) += 82596.o
|
|
|
|
# This is also a 82596 and should probably be merged
|
|
obj-$(CONFIG_LP486E) += lp486e.o
|
|
|
|
obj-$(CONFIG_ETH16I) += eth16i.o
|
|
obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
|
|
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
|
|
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
|
|
obj-$(CONFIG_EQUALIZER) += eql.o
|
|
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
|
|
obj-$(CONFIG_MIPS_GT96100ETH) += gt96100eth.o
|
|
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
|
|
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
|
|
obj-$(CONFIG_DECLANCE) += declance.o
|
|
obj-$(CONFIG_ATARILANCE) += atarilance.o
|
|
obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
|
|
obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
|
|
obj-$(CONFIG_A2065) += a2065.o
|
|
obj-$(CONFIG_HYDRA) += hydra.o 8390.o
|
|
obj-$(CONFIG_ARIADNE) += ariadne.o
|
|
obj-$(CONFIG_CS89x0) += cs89x0.o
|
|
obj-$(CONFIG_MACSONIC) += macsonic.o
|
|
obj-$(CONFIG_MACMACE) += macmace.o
|
|
obj-$(CONFIG_MAC89x0) += mac89x0.o
|
|
obj-$(CONFIG_TUN) += tun.o
|
|
obj-$(CONFIG_DL2K) += dl2k.o
|
|
obj-$(CONFIG_R8169) += r8169.o
|
|
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
|
|
obj-$(CONFIG_IBMVETH) += ibmveth.o
|
|
obj-$(CONFIG_S2IO) += s2io.o
|
|
obj-$(CONFIG_SMC91X) += smc91x.o
|
|
obj-$(CONFIG_FEC_8XX) += fec_8xx/
|
|
|
|
obj-$(CONFIG_ARM) += arm/
|
|
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
|
|
obj-$(CONFIG_TR) += tokenring/
|
|
obj-$(CONFIG_WAN) += wan/
|
|
obj-$(CONFIG_ARCNET) += arcnet/
|
|
obj-$(CONFIG_NET_PCMCIA) += pcmcia/
|
|
obj-$(CONFIG_NET_WIRELESS) += wireless/
|
|
obj-$(CONFIG_NET_TULIP) += tulip/
|
|
obj-$(CONFIG_HAMRADIO) += hamradio/
|
|
obj-$(CONFIG_IRDA) += irda/
|
|
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
|
|
|
|
obj-$(CONFIG_NETCONSOLE) += netconsole.o
|