android_kernel_xiaomi_sm8350/drivers/gpio/gpio-amdpt.c
Linus Torvalds 2ec98f5678 Bulk GPIO changes for the v5.3 kernel cycle:
Core:
 
 - When a gpio_chip request GPIOs from itself, it can now fully
   control the line characteristics, both machine and consumer
   flags. This makes a lot of sense, but took some time before I
   figured out that this is how it has to work.
 
 - Several smallish documentation fixes.
 
 New drivers:
 
 - The PCA953x driver now supports the TI TCA9539.
 
 - The DaVinci driver now supports the K3 AM654 SoCs.
 
 Driver improvements:
 
 - Major overhaul and hardening of the OMAP driver by Russell
   King.
 
 - Starting to move some drivers to the new API passing irq_chip
   along with the gpio_chip when adding the gpio_chip instead
   of adding it separately.
 
 Unrelated:
 
 - Delete the FMC subsystem.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl0i7gEACgkQQRCzN7AZ
 XXOeUA/+JKyI2zebTWBcgtxhn6VQCufMCtFmQl2JkEcy4pT7aBJcGWqFQCBW2Szf
 VTtqc8nNa90SZoOzsNbkeQgRjNKGZruMbh0ARUPcW4v3ZJHtUNUEDLTo8c3iyTgS
 9k/FTeaTLt4WSZujeAO0O7G4KNnOOlTKLh58dr0PmXUR+0v+fbMhcJqJ9ABueV+V
 qENdpkTuG1ZcvzgLhBBEXdt3Plw9ICLWmPXtwY+784ewucVPbyQX7jV4+bBZ25fL
 DerCuMIgL5vRWWdiFO6/Jp603rHzZpTnjLJJocXUFiD6zA5rvU2jTWxsnUttjisg
 8cTLMyQspsDvBxhEhCJVTuIKotbKH900TSaz+vx20W72/A1euy4y6uVi8FGZo4Ww
 KDkzB7anwHyEFKGnlYgHzDrfctgZrhQoyFz808DQRYg1JseZB5oGVDvScrPBD43j
 nbNDd8gwG4yp3tFnDx9xjIwQy3Ax4d510rAZyUN2801IlbA1bueq4t6Z2cCucWzX
 XA1gCKlXe4BUeitRAoZtqZNZG1ymEysW4jXy1V8xrwtAf8+QSN+xO98akz3VpnQL
 ae9q+HtF76fDBY1xFSXT37Ma3+4OR2vMF9QWuo4TCb9j1cL7llf8ZxtUq9LEHbDu
 erKLSSnwSFmqJNGSEA5SulGOCR/tRPkClngE9x0XEM6gOD+bs6E=
 =8zSV
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the big slew of GPIO changes for the v5.3 kernel cycle. This
  is mostly incremental work this time.

  Three important things:

   - The FMC subsystem is deleted through my tree. This happens through
     GPIO as its demise was discussed in relation to a patch decoupling
     its GPIO implementation from the standard way of handling GPIO. As
     it turns out, that is not the only subsystem it reimplements and
     the authors think it is better do scratch it and start over using
     the proper kernel subsystems than try to polish the rust shiny. See
     the commit (ACKed by the maintainers) for details.

   - Arnd made a small devres patch that was ACKed by Greg and goes into
     the device core.

   - SPDX header change colissions may happen, because at times I've
     seen that quite a lot changed during the -rc:s in regards to SPDX.
     (It is good stuff, tglx has me convinced, and it is worth the
     occasional pain.)

  Apart from this is is nothing controversial or problematic.

  Summary:

  Core:

   - When a gpio_chip request GPIOs from itself, it can now fully
     control the line characteristics, both machine and consumer flags.
     This makes a lot of sense, but took some time before I figured out
     that this is how it has to work.

   - Several smallish documentation fixes.

  New drivers:

   - The PCA953x driver now supports the TI TCA9539.

   - The DaVinci driver now supports the K3 AM654 SoCs.

  Driver improvements:

   - Major overhaul and hardening of the OMAP driver by Russell King.

   - Starting to move some drivers to the new API passing irq_chip along
     with the gpio_chip when adding the gpio_chip instead of adding it
     separately.

  Unrelated:

   - Delete the FMC subsystem"

* tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: tegra: Clean-up debugfs initialisation"
  gpiolib: Use spinlock_t instead of struct spinlock
  gpio: stp-xway: allow compile-testing
  gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency
  gpio: stp-xway: improve module clock error handling
  gpio: stp-xway: simplify error handling in xway_stp_probe()
  gpiolib: Clarify use of non-sleeping functions
  gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
  gpiolib: Document new gpio_chip.init_valid_mask field
  Documentation: gpio: Fix reference to gpiod_get_array()
  gpio: pl061: drop duplicate printing of device name
  gpio: altera: Pass irqchip when adding gpiochip
  gpio: siox: Use devm_ managed gpiochip
  gpio: siox: Add struct device *dev helper variable
  gpio: siox: Pass irqchip when adding gpiochip
  drivers: gpio: amd-fch: make resource struct const
  devres: allow const resource arguments
  gpio: ath79: Pass irqchip when adding gpiochip
  gpio: tegra: Clean-up debugfs initialisation
  gpio: siox: Switch to IRQ_TYPE_NONE
  ...
2019-07-09 09:07:00 -07:00

158 lines
3.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* AMD Promontory GPIO driver
*
* Copyright (C) 2015 ASMedia Technology Inc.
* Author: YD Tseng <yd_tseng@asmedia.com.tw>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/gpio/driver.h>
#include <linux/spinlock.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
#define PT_TOTAL_GPIO 8
/* PCI-E MMIO register offsets */
#define PT_DIRECTION_REG 0x00
#define PT_INPUTDATA_REG 0x04
#define PT_OUTPUTDATA_REG 0x08
#define PT_CLOCKRATE_REG 0x0C
#define PT_SYNC_REG 0x28
struct pt_gpio_chip {
struct gpio_chip gc;
void __iomem *reg_base;
};
static int pt_gpio_request(struct gpio_chip *gc, unsigned offset)
{
struct pt_gpio_chip *pt_gpio = gpiochip_get_data(gc);
unsigned long flags;
u32 using_pins;
dev_dbg(gc->parent, "pt_gpio_request offset=%x\n", offset);
spin_lock_irqsave(&gc->bgpio_lock, flags);
using_pins = readl(pt_gpio->reg_base + PT_SYNC_REG);
if (using_pins & BIT(offset)) {
dev_warn(gc->parent, "PT GPIO pin %x reconfigured\n",
offset);
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
return -EINVAL;
}
writel(using_pins | BIT(offset), pt_gpio->reg_base + PT_SYNC_REG);
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
return 0;
}
static void pt_gpio_free(struct gpio_chip *gc, unsigned offset)
{
struct pt_gpio_chip *pt_gpio = gpiochip_get_data(gc);
unsigned long flags;
u32 using_pins;
spin_lock_irqsave(&gc->bgpio_lock, flags);
using_pins = readl(pt_gpio->reg_base + PT_SYNC_REG);
using_pins &= ~BIT(offset);
writel(using_pins, pt_gpio->reg_base + PT_SYNC_REG);
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
dev_dbg(gc->parent, "pt_gpio_free offset=%x\n", offset);
}
static int pt_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct acpi_device *acpi_dev;
acpi_handle handle = ACPI_HANDLE(dev);
struct pt_gpio_chip *pt_gpio;
int ret = 0;
if (acpi_bus_get_device(handle, &acpi_dev)) {
dev_err(dev, "PT GPIO device node not found\n");
return -ENODEV;
}
pt_gpio = devm_kzalloc(dev, sizeof(struct pt_gpio_chip), GFP_KERNEL);
if (!pt_gpio)
return -ENOMEM;
pt_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pt_gpio->reg_base)) {
dev_err(dev, "Failed to map MMIO resource for PT GPIO.\n");
return PTR_ERR(pt_gpio->reg_base);
}
ret = bgpio_init(&pt_gpio->gc, dev, 4,
pt_gpio->reg_base + PT_INPUTDATA_REG,
pt_gpio->reg_base + PT_OUTPUTDATA_REG, NULL,
pt_gpio->reg_base + PT_DIRECTION_REG, NULL,
BGPIOF_READ_OUTPUT_REG_SET);
if (ret) {
dev_err(dev, "bgpio_init failed\n");
return ret;
}
pt_gpio->gc.owner = THIS_MODULE;
pt_gpio->gc.request = pt_gpio_request;
pt_gpio->gc.free = pt_gpio_free;
pt_gpio->gc.ngpio = PT_TOTAL_GPIO;
#if defined(CONFIG_OF_GPIO)
pt_gpio->gc.of_node = dev->of_node;
#endif
ret = gpiochip_add_data(&pt_gpio->gc, pt_gpio);
if (ret) {
dev_err(dev, "Failed to register GPIO lib\n");
return ret;
}
platform_set_drvdata(pdev, pt_gpio);
/* initialize register setting */
writel(0, pt_gpio->reg_base + PT_SYNC_REG);
writel(0, pt_gpio->reg_base + PT_CLOCKRATE_REG);
dev_dbg(dev, "PT GPIO driver loaded\n");
return ret;
}
static int pt_gpio_remove(struct platform_device *pdev)
{
struct pt_gpio_chip *pt_gpio = platform_get_drvdata(pdev);
gpiochip_remove(&pt_gpio->gc);
return 0;
}
static const struct acpi_device_id pt_gpio_acpi_match[] = {
{ "AMDF030", 0 },
{ "AMDIF030", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, pt_gpio_acpi_match);
static struct platform_driver pt_gpio_driver = {
.driver = {
.name = "pt-gpio",
.acpi_match_table = ACPI_PTR(pt_gpio_acpi_match),
},
.probe = pt_gpio_probe,
.remove = pt_gpio_remove,
};
module_platform_driver(pt_gpio_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("YD Tseng <yd_tseng@asmedia.com.tw>");
MODULE_DESCRIPTION("AMD Promontory GPIO Driver");