Russell King d2b1839425 [MMC] Set correct capacity for 1024-byte block cards ... We were passing set_capacity() the capacity we calculated in terms of the number of blocks on the card, which happened to be the right units for 512-byte block cards. However, with 1024-byte block cards, we end up setting the capacity to half the number of blocks. Fix this by shifting by the appropriate amount. Thanks to Todd Blumer for pointing this out. Use get_capacity() to report the card capacity, rather than recalculating it from the CSD information. Finally, use our chosen IO block size for the SET_BLOCKLEN command rather than the CSD read block size. Currently these are equivalent, but will not be in the future. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2005-12-22 23:21:38 +00:00
..
au1xmmc.c	Au1[12]00 mmc driver. Only tested on the Au1200 at this point though	2005-10-29 19:32:26 +01:00
au1xmmc.h	Au1[12]00 mmc driver. Only tested on the Au1200 at this point though	2005-10-29 19:32:26 +01:00
Kconfig	Au1[12]00 mmc driver. Only tested on the Au1200 at this point though	2005-10-29 19:32:26 +01:00
Makefile	Au1[12]00 mmc driver. Only tested on the Au1200 at this point though	2005-10-29 19:32:26 +01:00
mmc_block.c	[MMC] Set correct capacity for 1024-byte block cards	2005-12-22 23:21:38 +00:00
mmc_queue.c
mmc_queue.h
mmc_sysfs.c
mmc.c	[MMC] Explain the internals of mmc_power_up()	2005-12-14 14:57:35 +00:00
mmc.h
mmci.c	[MMC] mmci doesn't need asm/irq.h	2005-11-12 17:26:21 +00:00
mmci.h
pxamci.c	[DRIVER MODEL] Convert platform drivers to use struct platform_driver	2005-11-09 22:32:44 +00:00
pxamci.h
wbsd.c	Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel	2005-11-11 09:24:26 -08:00
wbsd.h