android_kernel_xiaomi_sm8350/drivers/net/wireless/b43
Johannes Berg 8318d78a44 cfg80211 API for channels/bitrates, mac80211 and driver conversion
This patch creates new cfg80211 wiphy API for channel and bitrate
registration and converts mac80211 and drivers to the new API. The
old mac80211 API is completely ripped out. All drivers (except ath5k)
are updated to the new API, in many cases I expect that optimisations
can be done.

Along with the regulatory code I've also ripped out the
IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be
unnecessary if the hardware simply gives us whatever channels it wants
to support and we then enable/disable them as required, which is pretty
much required for travelling.

Additionally, the patch adds proper "basic" rate handling for STA
mode interface, AP mode interface will have to have new API added
to allow userspace to set the basic rate set, currently it'll be
empty... However, the basic rate handling will need to be moved to
the BSS conf stuff.

I do expect there to be bugs in this, especially wrt. transmit
power handling where I'm basically clueless about how it should work.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29 15:19:32 -05:00
..
b43.h cfg80211 API for channels/bitrates, mac80211 and driver conversion 2008-02-29 15:19:32 -05:00
debugfs.c b43: Remove the PHY spinlock 2008-01-28 15:09:32 -08:00
debugfs.h
dma.c b43: Fix DMA for 30/32-bit DMA engines 2008-02-05 14:35:47 -05:00
dma.h b43: Fix DMA for 30/32-bit DMA engines 2008-02-05 14:35:47 -05:00
Kconfig Use a separate config option for the b43 pci to ssb bridge. 2008-02-28 09:13:10 -05:00
leds.c leds: Standardise LED naming scheme 2008-02-07 09:47:00 +00:00
leds.h
lo.c b43: Fix PHY register routing 2008-01-28 15:09:32 -08:00
lo.h
main.c cfg80211 API for channels/bitrates, mac80211 and driver conversion 2008-02-29 15:19:32 -05:00
main.h b43: Only select allowed TX and RX antennas 2008-01-28 15:09:14 -08:00
Makefile b43: Add NPHY radio init code 2008-01-28 15:09:53 -08:00
nphy.c b43: Add more N-PHY init code 2008-01-28 15:10:44 -08:00
nphy.h b43: Add more N-PHY init code 2008-01-28 15:10:44 -08:00
pcmcia.c
pcmcia.h
phy.c b43: Add NPHY channel switch code 2008-01-28 15:09:53 -08:00
phy.h b43: Add NPHY radio init code 2008-01-28 15:09:53 -08:00
rfkill.c
rfkill.h
sysfs.c cfg80211 API for channels/bitrates, mac80211 and driver conversion 2008-02-29 15:19:32 -05:00
sysfs.h
tables_nphy.c b43: Add lots of N-PHY lookup tables 2008-01-28 15:10:03 -08:00
tables_nphy.h b43: Add lots of N-PHY lookup tables 2008-01-28 15:10:03 -08:00
tables.c b43: Fix for broken transmission 2008-01-28 15:05:59 -08:00
tables.h b43: rewrite A PHY initialization 2008-01-28 15:04:31 -08:00
wa.c b43: Fix for broken transmission 2008-01-28 15:05:59 -08:00
wa.h b43: rewrite A PHY initialization 2008-01-28 15:04:31 -08:00
xmit.c cfg80211 API for channels/bitrates, mac80211 and driver conversion 2008-02-29 15:19:32 -05:00
xmit.h b43: Drop packets that we are not able to encrypt 2008-01-31 19:26:45 -08:00