859f0277a6
Since i2c autoprobing will disappear bttv needs to be converted to use v4l2_subdev instead. Without autoprobing the autoload module option has become obsolete. A warning is generated if it is set, but it is otherwise ignored. Since the bttv card definitions are of questionable value a new option was introduced to allow the user to control which audio module is selected: msp3400, tda7432 or tvaudio (or none at all). By default bttv will use the card definitions and fallback on tvaudio as the last resort. If no audio device was found a warning is printed. The saa6588 RDS device is now also explicitly probed since it is no longer possible to autoprobe it. A new saa6588 module option was added to override the card definition since I suspect more cards have this device than one would guess from the card definitions. Note that the probe addresses of the i2c modules are hardcoded in this driver. Once all v4l drivers are converted to v4l2_subdev this will be cleaned up. Such data belongs in an i2c driver header. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
408 lines
9.8 KiB
C
408 lines
9.8 KiB
C
/*
|
|
|
|
bttv-i2c.c -- all the i2c code is here
|
|
|
|
bttv - Bt848 frame grabber driver
|
|
|
|
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
|
|
& Marcus Metzler (mocm@thp.uni-koeln.de)
|
|
(c) 1999-2003 Gerd Knorr <kraxel@bytesex.org>
|
|
|
|
(c) 2005 Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
- Multituner support and i2c address binding
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "bttvp.h"
|
|
#include <media/v4l2-common.h>
|
|
#include <linux/jiffies.h>
|
|
#include <asm/io.h>
|
|
|
|
static int i2c_debug;
|
|
static int i2c_hw;
|
|
static int i2c_scan;
|
|
module_param(i2c_debug, int, 0644);
|
|
MODULE_PARM_DESC(i2c_hw,"configure i2c debug level");
|
|
module_param(i2c_hw, int, 0444);
|
|
MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, "
|
|
"instead of software bitbang");
|
|
module_param(i2c_scan, int, 0444);
|
|
MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
|
|
|
|
static unsigned int i2c_udelay = 5;
|
|
module_param(i2c_udelay, int, 0444);
|
|
MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs "
|
|
"(should be 5 or higher). Lower value means higher bus speed.");
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* I2C functions - bitbanging adapter (software i2c) */
|
|
|
|
static void bttv_bit_setscl(void *data, int state)
|
|
{
|
|
struct bttv *btv = (struct bttv*)data;
|
|
|
|
if (state)
|
|
btv->i2c_state |= 0x02;
|
|
else
|
|
btv->i2c_state &= ~0x02;
|
|
btwrite(btv->i2c_state, BT848_I2C);
|
|
btread(BT848_I2C);
|
|
}
|
|
|
|
static void bttv_bit_setsda(void *data, int state)
|
|
{
|
|
struct bttv *btv = (struct bttv*)data;
|
|
|
|
if (state)
|
|
btv->i2c_state |= 0x01;
|
|
else
|
|
btv->i2c_state &= ~0x01;
|
|
btwrite(btv->i2c_state, BT848_I2C);
|
|
btread(BT848_I2C);
|
|
}
|
|
|
|
static int bttv_bit_getscl(void *data)
|
|
{
|
|
struct bttv *btv = (struct bttv*)data;
|
|
int state;
|
|
|
|
state = btread(BT848_I2C) & 0x02 ? 1 : 0;
|
|
return state;
|
|
}
|
|
|
|
static int bttv_bit_getsda(void *data)
|
|
{
|
|
struct bttv *btv = (struct bttv*)data;
|
|
int state;
|
|
|
|
state = btread(BT848_I2C) & 0x01;
|
|
return state;
|
|
}
|
|
|
|
static struct i2c_algo_bit_data __devinitdata bttv_i2c_algo_bit_template = {
|
|
.setsda = bttv_bit_setsda,
|
|
.setscl = bttv_bit_setscl,
|
|
.getsda = bttv_bit_getsda,
|
|
.getscl = bttv_bit_getscl,
|
|
.udelay = 16,
|
|
.timeout = 200,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* I2C functions - hardware i2c */
|
|
|
|
static u32 functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static int
|
|
bttv_i2c_wait_done(struct bttv *btv)
|
|
{
|
|
int rc = 0;
|
|
|
|
/* timeout */
|
|
if (wait_event_interruptible_timeout(btv->i2c_queue,
|
|
btv->i2c_done, msecs_to_jiffies(85)) == -ERESTARTSYS)
|
|
|
|
rc = -EIO;
|
|
|
|
if (btv->i2c_done & BT848_INT_RACK)
|
|
rc = 1;
|
|
btv->i2c_done = 0;
|
|
return rc;
|
|
}
|
|
|
|
#define I2C_HW (BT878_I2C_MODE | BT848_I2C_SYNC |\
|
|
BT848_I2C_SCL | BT848_I2C_SDA)
|
|
|
|
static int
|
|
bttv_i2c_sendbytes(struct bttv *btv, const struct i2c_msg *msg, int last)
|
|
{
|
|
u32 xmit;
|
|
int retval,cnt;
|
|
|
|
/* sanity checks */
|
|
if (0 == msg->len)
|
|
return -EINVAL;
|
|
|
|
/* start, address + first byte */
|
|
xmit = (msg->addr << 25) | (msg->buf[0] << 16) | I2C_HW;
|
|
if (msg->len > 1 || !last)
|
|
xmit |= BT878_I2C_NOSTOP;
|
|
btwrite(xmit, BT848_I2C);
|
|
retval = bttv_i2c_wait_done(btv);
|
|
if (retval < 0)
|
|
goto err;
|
|
if (retval == 0)
|
|
goto eio;
|
|
if (i2c_debug) {
|
|
printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
|
|
if (!(xmit & BT878_I2C_NOSTOP))
|
|
printk(" >\n");
|
|
}
|
|
|
|
for (cnt = 1; cnt < msg->len; cnt++ ) {
|
|
/* following bytes */
|
|
xmit = (msg->buf[cnt] << 24) | I2C_HW | BT878_I2C_NOSTART;
|
|
if (cnt < msg->len-1 || !last)
|
|
xmit |= BT878_I2C_NOSTOP;
|
|
btwrite(xmit, BT848_I2C);
|
|
retval = bttv_i2c_wait_done(btv);
|
|
if (retval < 0)
|
|
goto err;
|
|
if (retval == 0)
|
|
goto eio;
|
|
if (i2c_debug) {
|
|
printk(" %02x", msg->buf[cnt]);
|
|
if (!(xmit & BT878_I2C_NOSTOP))
|
|
printk(" >\n");
|
|
}
|
|
}
|
|
return msg->len;
|
|
|
|
eio:
|
|
retval = -EIO;
|
|
err:
|
|
if (i2c_debug)
|
|
printk(" ERR: %d\n",retval);
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
bttv_i2c_readbytes(struct bttv *btv, const struct i2c_msg *msg, int last)
|
|
{
|
|
u32 xmit;
|
|
u32 cnt;
|
|
int retval;
|
|
|
|
for(cnt = 0; cnt < msg->len; cnt++) {
|
|
xmit = (msg->addr << 25) | (1 << 24) | I2C_HW;
|
|
if (cnt < msg->len-1)
|
|
xmit |= BT848_I2C_W3B;
|
|
if (cnt < msg->len-1 || !last)
|
|
xmit |= BT878_I2C_NOSTOP;
|
|
if (cnt)
|
|
xmit |= BT878_I2C_NOSTART;
|
|
btwrite(xmit, BT848_I2C);
|
|
retval = bttv_i2c_wait_done(btv);
|
|
if (retval < 0)
|
|
goto err;
|
|
if (retval == 0)
|
|
goto eio;
|
|
msg->buf[cnt] = ((u32)btread(BT848_I2C) >> 8) & 0xff;
|
|
if (i2c_debug) {
|
|
if (!(xmit & BT878_I2C_NOSTART))
|
|
printk(" <R %02x", (msg->addr << 1) +1);
|
|
printk(" =%02x", msg->buf[cnt]);
|
|
if (!(xmit & BT878_I2C_NOSTOP))
|
|
printk(" >\n");
|
|
}
|
|
}
|
|
return msg->len;
|
|
|
|
eio:
|
|
retval = -EIO;
|
|
err:
|
|
if (i2c_debug)
|
|
printk(" ERR: %d\n",retval);
|
|
return retval;
|
|
}
|
|
|
|
static int bttv_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct v4l2_device *v4l2_dev = i2c_get_adapdata(i2c_adap);
|
|
struct bttv *btv = to_bttv(v4l2_dev);
|
|
int retval = 0;
|
|
int i;
|
|
|
|
if (i2c_debug)
|
|
printk("bt-i2c:");
|
|
btwrite(BT848_INT_I2CDONE|BT848_INT_RACK, BT848_INT_STAT);
|
|
for (i = 0 ; i < num; i++) {
|
|
if (msgs[i].flags & I2C_M_RD) {
|
|
/* read */
|
|
retval = bttv_i2c_readbytes(btv, &msgs[i], i+1 == num);
|
|
if (retval < 0)
|
|
goto err;
|
|
} else {
|
|
/* write */
|
|
retval = bttv_i2c_sendbytes(btv, &msgs[i], i+1 == num);
|
|
if (retval < 0)
|
|
goto err;
|
|
}
|
|
}
|
|
return num;
|
|
|
|
err:
|
|
return retval;
|
|
}
|
|
|
|
static const struct i2c_algorithm bttv_algo = {
|
|
.master_xfer = bttv_i2c_xfer,
|
|
.functionality = functionality,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* I2C functions - common stuff */
|
|
|
|
/* read I2C */
|
|
int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for)
|
|
{
|
|
unsigned char buffer = 0;
|
|
|
|
if (0 != btv->i2c_rc)
|
|
return -1;
|
|
if (bttv_verbose && NULL != probe_for)
|
|
printk(KERN_INFO "bttv%d: i2c: checking for %s @ 0x%02x... ",
|
|
btv->c.nr,probe_for,addr);
|
|
btv->i2c_client.addr = addr >> 1;
|
|
if (1 != i2c_master_recv(&btv->i2c_client, &buffer, 1)) {
|
|
if (NULL != probe_for) {
|
|
if (bttv_verbose)
|
|
printk("not found\n");
|
|
} else
|
|
printk(KERN_WARNING "bttv%d: i2c read 0x%x: error\n",
|
|
btv->c.nr,addr);
|
|
return -1;
|
|
}
|
|
if (bttv_verbose && NULL != probe_for)
|
|
printk("found\n");
|
|
return buffer;
|
|
}
|
|
|
|
/* write I2C */
|
|
int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1,
|
|
unsigned char b2, int both)
|
|
{
|
|
unsigned char buffer[2];
|
|
int bytes = both ? 2 : 1;
|
|
|
|
if (0 != btv->i2c_rc)
|
|
return -1;
|
|
btv->i2c_client.addr = addr >> 1;
|
|
buffer[0] = b1;
|
|
buffer[1] = b2;
|
|
if (bytes != i2c_master_send(&btv->i2c_client, buffer, bytes))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
/* read EEPROM content */
|
|
void __devinit bttv_readee(struct bttv *btv, unsigned char *eedata, int addr)
|
|
{
|
|
memset(eedata, 0, 256);
|
|
if (0 != btv->i2c_rc)
|
|
return;
|
|
btv->i2c_client.addr = addr >> 1;
|
|
tveeprom_read(&btv->i2c_client, eedata, 256);
|
|
}
|
|
|
|
static char *i2c_devs[128] = {
|
|
[ 0x1c >> 1 ] = "lgdt330x",
|
|
[ 0x30 >> 1 ] = "IR (hauppauge)",
|
|
[ 0x80 >> 1 ] = "msp34xx",
|
|
[ 0x86 >> 1 ] = "tda9887",
|
|
[ 0xa0 >> 1 ] = "eeprom",
|
|
[ 0xc0 >> 1 ] = "tuner (analog)",
|
|
[ 0xc2 >> 1 ] = "tuner (analog)",
|
|
};
|
|
|
|
static void do_i2c_scan(char *name, struct i2c_client *c)
|
|
{
|
|
unsigned char buf;
|
|
int i,rc;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
|
|
c->addr = i;
|
|
rc = i2c_master_recv(c,&buf,0);
|
|
if (rc < 0)
|
|
continue;
|
|
printk("%s: i2c scan: found device @ 0x%x [%s]\n",
|
|
name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
|
|
}
|
|
}
|
|
|
|
/* init + register i2c algo-bit adapter */
|
|
int __devinit init_bttv_i2c(struct bttv *btv)
|
|
{
|
|
strlcpy(btv->i2c_client.name, "bttv internal", I2C_NAME_SIZE);
|
|
|
|
if (i2c_hw)
|
|
btv->use_i2c_hw = 1;
|
|
if (btv->use_i2c_hw) {
|
|
/* bt878 */
|
|
strlcpy(btv->c.i2c_adap.name, "bt878",
|
|
sizeof(btv->c.i2c_adap.name));
|
|
btv->c.i2c_adap.id = I2C_HW_B_BT848; /* FIXME */
|
|
btv->c.i2c_adap.algo = &bttv_algo;
|
|
} else {
|
|
/* bt848 */
|
|
/* Prevents usage of invalid delay values */
|
|
if (i2c_udelay<5)
|
|
i2c_udelay=5;
|
|
|
|
strlcpy(btv->c.i2c_adap.name, "bttv",
|
|
sizeof(btv->c.i2c_adap.name));
|
|
btv->c.i2c_adap.id = I2C_HW_B_BT848;
|
|
memcpy(&btv->i2c_algo, &bttv_i2c_algo_bit_template,
|
|
sizeof(bttv_i2c_algo_bit_template));
|
|
btv->i2c_algo.udelay = i2c_udelay;
|
|
btv->i2c_algo.data = btv;
|
|
btv->c.i2c_adap.algo_data = &btv->i2c_algo;
|
|
}
|
|
btv->c.i2c_adap.owner = THIS_MODULE;
|
|
|
|
btv->c.i2c_adap.dev.parent = &btv->c.pci->dev;
|
|
snprintf(btv->c.i2c_adap.name, sizeof(btv->c.i2c_adap.name),
|
|
"bt%d #%d [%s]", btv->id, btv->c.nr,
|
|
btv->use_i2c_hw ? "hw" : "sw");
|
|
|
|
i2c_set_adapdata(&btv->c.i2c_adap, &btv->c.v4l2_dev);
|
|
btv->i2c_client.adapter = &btv->c.i2c_adap;
|
|
|
|
|
|
if (btv->use_i2c_hw) {
|
|
btv->i2c_rc = i2c_add_adapter(&btv->c.i2c_adap);
|
|
} else {
|
|
bttv_bit_setscl(btv,1);
|
|
bttv_bit_setsda(btv,1);
|
|
btv->i2c_rc = i2c_bit_add_bus(&btv->c.i2c_adap);
|
|
}
|
|
if (0 == btv->i2c_rc && i2c_scan)
|
|
do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client);
|
|
return btv->i2c_rc;
|
|
}
|
|
|
|
int __devexit fini_bttv_i2c(struct bttv *btv)
|
|
{
|
|
if (0 != btv->i2c_rc)
|
|
return 0;
|
|
|
|
return i2c_del_adapter(&btv->c.i2c_adap);
|
|
}
|
|
|
|
/*
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|