2cb114c4fa
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723190757.67351-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
350 lines
9.1 KiB
C
350 lines
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
*
|
|
* Copyright (C) STMicroelectronics SA 2017
|
|
* Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
|
|
* Pierre-Yves Mordret <pierre-yves.mordret@st.com>
|
|
*
|
|
* DMA Router driver for STM32 DMA MUX
|
|
*
|
|
* Based on TI DMA Crossbar driver
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define STM32_DMAMUX_CCR(x) (0x4 * (x))
|
|
#define STM32_DMAMUX_MAX_DMA_REQUESTS 32
|
|
#define STM32_DMAMUX_MAX_REQUESTS 255
|
|
|
|
struct stm32_dmamux {
|
|
u32 master;
|
|
u32 request;
|
|
u32 chan_id;
|
|
};
|
|
|
|
struct stm32_dmamux_data {
|
|
struct dma_router dmarouter;
|
|
struct clk *clk;
|
|
struct reset_control *rst;
|
|
void __iomem *iomem;
|
|
u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
|
|
u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
|
|
spinlock_t lock; /* Protects register access */
|
|
unsigned long *dma_inuse; /* Used DMA channel */
|
|
u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
|
|
* [0] holds number of DMA Masters.
|
|
* To be kept at very end end of this structure
|
|
*/
|
|
};
|
|
|
|
static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
|
|
{
|
|
return readl_relaxed(iomem + reg);
|
|
}
|
|
|
|
static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
|
|
{
|
|
writel_relaxed(val, iomem + reg);
|
|
}
|
|
|
|
static void stm32_dmamux_free(struct device *dev, void *route_data)
|
|
{
|
|
struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
|
|
struct stm32_dmamux *mux = route_data;
|
|
unsigned long flags;
|
|
|
|
/* Clear dma request */
|
|
spin_lock_irqsave(&dmamux->lock, flags);
|
|
|
|
stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
|
|
clear_bit(mux->chan_id, dmamux->dma_inuse);
|
|
|
|
pm_runtime_put_sync(dev);
|
|
|
|
spin_unlock_irqrestore(&dmamux->lock, flags);
|
|
|
|
dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
|
|
mux->request, mux->master, mux->chan_id);
|
|
|
|
kfree(mux);
|
|
}
|
|
|
|
static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
|
|
struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
|
|
struct stm32_dmamux *mux;
|
|
u32 i, min, max;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
if (dma_spec->args_count != 3) {
|
|
dev_err(&pdev->dev, "invalid number of dma mux args\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
if (dma_spec->args[0] > dmamux->dmamux_requests) {
|
|
dev_err(&pdev->dev, "invalid mux request number: %d\n",
|
|
dma_spec->args[0]);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
mux = kzalloc(sizeof(*mux), GFP_KERNEL);
|
|
if (!mux)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
spin_lock_irqsave(&dmamux->lock, flags);
|
|
mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
|
|
dmamux->dma_requests);
|
|
|
|
if (mux->chan_id == dmamux->dma_requests) {
|
|
spin_unlock_irqrestore(&dmamux->lock, flags);
|
|
dev_err(&pdev->dev, "Run out of free DMA requests\n");
|
|
ret = -ENOMEM;
|
|
goto error_chan_id;
|
|
}
|
|
set_bit(mux->chan_id, dmamux->dma_inuse);
|
|
spin_unlock_irqrestore(&dmamux->lock, flags);
|
|
|
|
/* Look for DMA Master */
|
|
for (i = 1, min = 0, max = dmamux->dma_reqs[i];
|
|
i <= dmamux->dma_reqs[0];
|
|
min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
|
|
if (mux->chan_id < max)
|
|
break;
|
|
mux->master = i - 1;
|
|
|
|
/* The of_node_put() will be done in of_dma_router_xlate function */
|
|
dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
|
|
if (!dma_spec->np) {
|
|
dev_err(&pdev->dev, "can't get dma master\n");
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* Set dma request */
|
|
spin_lock_irqsave(&dmamux->lock, flags);
|
|
ret = pm_runtime_get_sync(&pdev->dev);
|
|
if (ret < 0) {
|
|
spin_unlock_irqrestore(&dmamux->lock, flags);
|
|
goto error;
|
|
}
|
|
spin_unlock_irqrestore(&dmamux->lock, flags);
|
|
|
|
mux->request = dma_spec->args[0];
|
|
|
|
/* craft DMA spec */
|
|
dma_spec->args[3] = dma_spec->args[2];
|
|
dma_spec->args[2] = dma_spec->args[1];
|
|
dma_spec->args[1] = 0;
|
|
dma_spec->args[0] = mux->chan_id - min;
|
|
dma_spec->args_count = 4;
|
|
|
|
stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
|
|
mux->request);
|
|
dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
|
|
mux->request, mux->master, mux->chan_id);
|
|
|
|
return mux;
|
|
|
|
error:
|
|
clear_bit(mux->chan_id, dmamux->dma_inuse);
|
|
|
|
error_chan_id:
|
|
kfree(mux);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static const struct of_device_id stm32_stm32dma_master_match[] = {
|
|
{ .compatible = "st,stm32-dma", },
|
|
{},
|
|
};
|
|
|
|
static int stm32_dmamux_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
const struct of_device_id *match;
|
|
struct device_node *dma_node;
|
|
struct stm32_dmamux_data *stm32_dmamux;
|
|
struct resource *res;
|
|
void __iomem *iomem;
|
|
int i, count, ret;
|
|
u32 dma_req;
|
|
|
|
if (!node)
|
|
return -ENODEV;
|
|
|
|
count = device_property_count_u32(&pdev->dev, "dma-masters");
|
|
if (count < 0) {
|
|
dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
|
|
sizeof(u32) * (count + 1), GFP_KERNEL);
|
|
if (!stm32_dmamux)
|
|
return -ENOMEM;
|
|
|
|
dma_req = 0;
|
|
for (i = 1; i <= count; i++) {
|
|
dma_node = of_parse_phandle(node, "dma-masters", i - 1);
|
|
|
|
match = of_match_node(stm32_stm32dma_master_match, dma_node);
|
|
if (!match) {
|
|
dev_err(&pdev->dev, "DMA master is not supported\n");
|
|
of_node_put(dma_node);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_u32(dma_node, "dma-requests",
|
|
&stm32_dmamux->dma_reqs[i])) {
|
|
dev_info(&pdev->dev,
|
|
"Missing MUX output information, using %u.\n",
|
|
STM32_DMAMUX_MAX_DMA_REQUESTS);
|
|
stm32_dmamux->dma_reqs[i] =
|
|
STM32_DMAMUX_MAX_DMA_REQUESTS;
|
|
}
|
|
dma_req += stm32_dmamux->dma_reqs[i];
|
|
of_node_put(dma_node);
|
|
}
|
|
|
|
if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
|
|
dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
stm32_dmamux->dma_requests = dma_req;
|
|
stm32_dmamux->dma_reqs[0] = count;
|
|
stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
|
|
BITS_TO_LONGS(dma_req),
|
|
sizeof(unsigned long),
|
|
GFP_KERNEL);
|
|
if (!stm32_dmamux->dma_inuse)
|
|
return -ENOMEM;
|
|
|
|
if (device_property_read_u32(&pdev->dev, "dma-requests",
|
|
&stm32_dmamux->dmamux_requests)) {
|
|
stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
|
|
dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
|
|
stm32_dmamux->dmamux_requests);
|
|
}
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
iomem = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(iomem))
|
|
return PTR_ERR(iomem);
|
|
|
|
spin_lock_init(&stm32_dmamux->lock);
|
|
|
|
stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(stm32_dmamux->clk)) {
|
|
ret = PTR_ERR(stm32_dmamux->clk);
|
|
if (ret == -EPROBE_DEFER)
|
|
dev_info(&pdev->dev, "Missing controller clock\n");
|
|
return ret;
|
|
}
|
|
|
|
stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
|
|
if (!IS_ERR(stm32_dmamux->rst)) {
|
|
reset_control_assert(stm32_dmamux->rst);
|
|
udelay(2);
|
|
reset_control_deassert(stm32_dmamux->rst);
|
|
}
|
|
|
|
stm32_dmamux->iomem = iomem;
|
|
stm32_dmamux->dmarouter.dev = &pdev->dev;
|
|
stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
|
|
|
|
platform_set_drvdata(pdev, stm32_dmamux);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
if (!IS_ERR(stm32_dmamux->clk)) {
|
|
ret = clk_prepare_enable(stm32_dmamux->clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
|
|
/* Reset the dmamux */
|
|
for (i = 0; i < stm32_dmamux->dma_requests; i++)
|
|
stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
|
|
|
|
pm_runtime_put(&pdev->dev);
|
|
|
|
return of_dma_router_register(node, stm32_dmamux_route_allocate,
|
|
&stm32_dmamux->dmarouter);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int stm32_dmamux_runtime_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(stm32_dmamux->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_dmamux_runtime_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(stm32_dmamux->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to prepare_enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops stm32_dmamux_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(stm32_dmamux_runtime_suspend,
|
|
stm32_dmamux_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct of_device_id stm32_dmamux_match[] = {
|
|
{ .compatible = "st,stm32h7-dmamux" },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver stm32_dmamux_driver = {
|
|
.probe = stm32_dmamux_probe,
|
|
.driver = {
|
|
.name = "stm32-dmamux",
|
|
.of_match_table = stm32_dmamux_match,
|
|
.pm = &stm32_dmamux_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int __init stm32_dmamux_init(void)
|
|
{
|
|
return platform_driver_register(&stm32_dmamux_driver);
|
|
}
|
|
arch_initcall(stm32_dmamux_init);
|
|
|
|
MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
|
|
MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
|
|
MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
|
|
MODULE_LICENSE("GPL v2");
|