android_kernel_xiaomi_sm8350/drivers/char/mwave/tp3780i.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

582 lines
18 KiB
C

/*
*
* tp3780i.c -- board driver for 3780i on ThinkPads
*
*
* Written By: Mike Sullivan IBM Corporation
*
* Copyright (C) 1999 IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
*
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* 10/23/2000 - Alpha Release
* First release to the public
*/
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include "smapi.h"
#include "mwavedd.h"
#include "tp3780i.h"
#include "3780i.h"
#include "mwavepub.h"
extern MWAVE_DEVICE_DATA mwave_s_mdd;
static unsigned short s_ausThinkpadIrqToField[16] =
{ 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0x0002, 0x0003, 0xFFFF, 0x0004,
0xFFFF, 0xFFFF, 0x0005, 0x0006, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007 };
static unsigned short s_ausThinkpadDmaToField[8] =
{ 0x0001, 0x0002, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0003, 0x0004 };
static unsigned short s_numIrqs = 16, s_numDmas = 8;
static void EnableSRAM(THINKPAD_BD_DATA * pBDData)
{
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
unsigned short usDspBaseIO = pSettings->usDspBaseIO;
DSP_GPIO_OUTPUT_DATA_15_8 rGpioOutputData;
DSP_GPIO_DRIVER_ENABLE_15_8 rGpioDriverEnable;
DSP_GPIO_MODE_15_8 rGpioMode;
PRINTK_1(TRACE_TP3780I, "tp3780i::EnableSRAM, entry\n");
MKWORD(rGpioMode) = ReadMsaCfg(DSP_GpioModeControl_15_8);
rGpioMode.GpioMode10 = 0;
WriteMsaCfg(DSP_GpioModeControl_15_8, MKWORD(rGpioMode));
MKWORD(rGpioDriverEnable) = 0;
rGpioDriverEnable.Enable10 = TRUE;
rGpioDriverEnable.Mask10 = TRUE;
WriteMsaCfg(DSP_GpioDriverEnable_15_8, MKWORD(rGpioDriverEnable));
MKWORD(rGpioOutputData) = 0;
rGpioOutputData.Latch10 = 0;
rGpioOutputData.Mask10 = TRUE;
WriteMsaCfg(DSP_GpioOutputData_15_8, MKWORD(rGpioOutputData));
PRINTK_1(TRACE_TP3780I, "tp3780i::EnableSRAM exit\n");
}
static irqreturn_t UartInterrupt(int irq, void *dev_id)
{
PRINTK_3(TRACE_TP3780I,
"tp3780i::UartInterrupt entry irq %x dev_id %p\n", irq, dev_id);
return IRQ_HANDLED;
}
static irqreturn_t DspInterrupt(int irq, void *dev_id)
{
pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pDrvData->rBDData.rDspSettings;
unsigned short usDspBaseIO = pSettings->usDspBaseIO;
unsigned short usIPCSource = 0, usIsolationMask, usPCNum;
PRINTK_3(TRACE_TP3780I,
"tp3780i::DspInterrupt entry irq %x dev_id %p\n", irq, dev_id);
if (dsp3780I_GetIPCSource(usDspBaseIO, &usIPCSource) == 0) {
PRINTK_2(TRACE_TP3780I,
"tp3780i::DspInterrupt, return from dsp3780i_GetIPCSource, usIPCSource %x\n",
usIPCSource);
usIsolationMask = 1;
for (usPCNum = 1; usPCNum <= 16; usPCNum++) {
if (usIPCSource & usIsolationMask) {
usIPCSource &= ~usIsolationMask;
PRINTK_3(TRACE_TP3780I,
"tp3780i::DspInterrupt usPCNum %x usIPCSource %x\n",
usPCNum, usIPCSource);
if (pDrvData->IPCs[usPCNum - 1].usIntCount == 0) {
pDrvData->IPCs[usPCNum - 1].usIntCount = 1;
}
PRINTK_2(TRACE_TP3780I,
"tp3780i::DspInterrupt usIntCount %x\n",
pDrvData->IPCs[usPCNum - 1].usIntCount);
if (pDrvData->IPCs[usPCNum - 1].bIsEnabled == TRUE) {
PRINTK_2(TRACE_TP3780I,
"tp3780i::DspInterrupt, waking up usPCNum %x\n",
usPCNum - 1);
wake_up_interruptible(&pDrvData->IPCs[usPCNum - 1].ipc_wait_queue);
} else {
PRINTK_2(TRACE_TP3780I,
"tp3780i::DspInterrupt, no one waiting for IPC %x\n",
usPCNum - 1);
}
}
if (usIPCSource == 0)
break;
/* try next IPC */
usIsolationMask = usIsolationMask << 1;
}
} else {
PRINTK_1(TRACE_TP3780I,
"tp3780i::DspInterrupt, return false from dsp3780i_GetIPCSource\n");
}
PRINTK_1(TRACE_TP3780I, "tp3780i::DspInterrupt exit\n");
return IRQ_HANDLED;
}
int tp3780I_InitializeBoardData(THINKPAD_BD_DATA * pBDData)
{
int retval = 0;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData entry pBDData %p\n", pBDData);
pBDData->bDSPEnabled = FALSE;
pSettings->bInterruptClaimed = FALSE;
retval = smapi_init();
if (retval) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine\n");
} else {
if (mwave_3780i_irq || mwave_3780i_io || mwave_uart_irq || mwave_uart_io) {
retval = smapi_set_DSP_cfg();
}
}
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData exit retval %x\n", retval);
return retval;
}
int tp3780I_Cleanup(THINKPAD_BD_DATA * pBDData)
{
int retval = 0;
PRINTK_2(TRACE_TP3780I,
"tp3780i::tp3780I_Cleanup entry and exit pBDData %p\n", pBDData);
return retval;
}
int tp3780I_CalcResources(THINKPAD_BD_DATA * pBDData)
{
SMAPI_DSP_SETTINGS rSmapiInfo;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
PRINTK_2(TRACE_TP3780I,
"tp3780i::tp3780I_CalcResources entry pBDData %p\n", pBDData);
if (smapi_query_DSP_cfg(&rSmapiInfo)) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Could not query DSP config. Aborting.\n");
return -EIO;
}
/* Sanity check */
if (
( rSmapiInfo.usDspIRQ == 0 )
|| ( rSmapiInfo.usDspBaseIO == 0 )
|| ( rSmapiInfo.usUartIRQ == 0 )
|| ( rSmapiInfo.usUartBaseIO == 0 )
) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Illegal resource setting. Aborting.\n");
return -EIO;
}
pSettings->bDSPEnabled = (rSmapiInfo.bDSPEnabled && rSmapiInfo.bDSPPresent);
pSettings->bModemEnabled = rSmapiInfo.bModemEnabled;
pSettings->usDspIrq = rSmapiInfo.usDspIRQ;
pSettings->usDspDma = rSmapiInfo.usDspDMA;
pSettings->usDspBaseIO = rSmapiInfo.usDspBaseIO;
pSettings->usUartIrq = rSmapiInfo.usUartIRQ;
pSettings->usUartBaseIO = rSmapiInfo.usUartBaseIO;
pSettings->uDStoreSize = TP_ABILITIES_DATA_SIZE;
pSettings->uIStoreSize = TP_ABILITIES_INST_SIZE;
pSettings->uIps = TP_ABILITIES_INTS_PER_SEC;
if (pSettings->bDSPEnabled && pSettings->bModemEnabled && pSettings->usDspIrq == pSettings->usUartIrq) {
pBDData->bShareDspIrq = pBDData->bShareUartIrq = 1;
} else {
pBDData->bShareDspIrq = pBDData->bShareUartIrq = 0;
}
PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_CalcResources exit\n");
return 0;
}
int tp3780I_ClaimResources(THINKPAD_BD_DATA * pBDData)
{
int retval = 0;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
struct resource *pres;
PRINTK_2(TRACE_TP3780I,
"tp3780i::tp3780I_ClaimResources entry pBDData %p\n", pBDData);
pres = request_region(pSettings->usDspBaseIO, 16, "mwave_3780i");
if ( pres == NULL ) retval = -EIO;
if (retval) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_ClaimResources: Error: Could not claim I/O region starting at %x\n", pSettings->usDspBaseIO);
retval = -EIO;
}
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ClaimResources exit retval %x\n", retval);
return retval;
}
int tp3780I_ReleaseResources(THINKPAD_BD_DATA * pBDData)
{
int retval = 0;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
PRINTK_2(TRACE_TP3780I,
"tp3780i::tp3780I_ReleaseResources entry pBDData %p\n", pBDData);
release_region(pSettings->usDspBaseIO & (~3), 16);
if (pSettings->bInterruptClaimed) {
free_irq(pSettings->usDspIrq, NULL);
pSettings->bInterruptClaimed = FALSE;
}
PRINTK_2(TRACE_TP3780I,
"tp3780i::tp3780I_ReleaseResources exit retval %x\n", retval);
return retval;
}
int tp3780I_EnableDSP(THINKPAD_BD_DATA * pBDData)
{
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
BOOLEAN bDSPPoweredUp = FALSE, bInterruptAllocated = FALSE;
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_EnableDSP entry pBDData %p\n", pBDData);
if (pBDData->bDSPEnabled) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: DSP already enabled!\n");
goto exit_cleanup;
}
if (!pSettings->bDSPEnabled) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780::tp3780I_EnableDSP: Error: pSettings->bDSPEnabled not set\n");
goto exit_cleanup;
}
if (
(pSettings->usDspIrq >= s_numIrqs)
|| (pSettings->usDspDma >= s_numDmas)
|| (s_ausThinkpadIrqToField[pSettings->usDspIrq] == 0xFFFF)
|| (s_ausThinkpadDmaToField[pSettings->usDspDma] == 0xFFFF)
) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: invalid irq %x\n", pSettings->usDspIrq);
goto exit_cleanup;
}
if (
((pSettings->usDspBaseIO & 0xF00F) != 0)
|| (pSettings->usDspBaseIO & 0x0FF0) == 0
) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Invalid DSP base I/O address %x\n", pSettings->usDspBaseIO);
goto exit_cleanup;
}
if (pSettings->bModemEnabled) {
if (
pSettings->usUartIrq >= s_numIrqs
|| s_ausThinkpadIrqToField[pSettings->usUartIrq] == 0xFFFF
) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Invalid UART IRQ %x\n", pSettings->usUartIrq);
goto exit_cleanup;
}
switch (pSettings->usUartBaseIO) {
case 0x03F8:
case 0x02F8:
case 0x03E8:
case 0x02E8:
break;
default:
PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: Invalid UART base I/O address %x\n", pSettings->usUartBaseIO);
goto exit_cleanup;
}
}
pSettings->bDspIrqActiveLow = pSettings->bDspIrqPulse = TRUE;
pSettings->bUartIrqActiveLow = pSettings->bUartIrqPulse = TRUE;
if (pBDData->bShareDspIrq) {
pSettings->bDspIrqActiveLow = FALSE;
}
if (pBDData->bShareUartIrq) {
pSettings->bUartIrqActiveLow = FALSE;
}
pSettings->usNumTransfers = TP_CFG_NumTransfers;
pSettings->usReRequest = TP_CFG_RerequestTimer;
pSettings->bEnableMEMCS16 = TP_CFG_MEMCS16;
pSettings->usIsaMemCmdWidth = TP_CFG_IsaMemCmdWidth;
pSettings->bGateIOCHRDY = TP_CFG_GateIOCHRDY;
pSettings->bEnablePwrMgmt = TP_CFG_EnablePwrMgmt;
pSettings->usHBusTimerLoadValue = TP_CFG_HBusTimerValue;
pSettings->bDisableLBusTimeout = TP_CFG_DisableLBusTimeout;
pSettings->usN_Divisor = TP_CFG_N_Divisor;
pSettings->usM_Multiplier = TP_CFG_M_Multiplier;
pSettings->bPllBypass = TP_CFG_PllBypass;
pSettings->usChipletEnable = TP_CFG_ChipletEnable;
if (request_irq(pSettings->usUartIrq, &UartInterrupt, 0, "mwave_uart", NULL)) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Could not get UART IRQ %x\n", pSettings->usUartIrq);
goto exit_cleanup;
} else { /* no conflict just release */
free_irq(pSettings->usUartIrq, NULL);
}
if (request_irq(pSettings->usDspIrq, &DspInterrupt, 0, "mwave_3780i", NULL)) {
PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: Could not get 3780i IRQ %x\n", pSettings->usDspIrq);
goto exit_cleanup;
} else {
PRINTK_3(TRACE_TP3780I,
"tp3780i::tp3780I_EnableDSP, got interrupt %x bShareDspIrq %x\n",
pSettings->usDspIrq, pBDData->bShareDspIrq);
bInterruptAllocated = TRUE;
pSettings->bInterruptClaimed = TRUE;
}
smapi_set_DSP_power_state(FALSE);
if (smapi_set_DSP_power_state(TRUE)) {
PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: smapi_set_DSP_power_state(TRUE) failed\n");
goto exit_cleanup;
} else {
bDSPPoweredUp = TRUE;
}
if (dsp3780I_EnableDSP(pSettings, s_ausThinkpadIrqToField, s_ausThinkpadDmaToField)) {
PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: dsp7880I_EnableDSP() failed\n");
goto exit_cleanup;
}
EnableSRAM(pBDData);
pBDData->bDSPEnabled = TRUE;
PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_EnableDSP exit\n");
return 0;
exit_cleanup:
PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Cleaning up\n");
if (bDSPPoweredUp)
smapi_set_DSP_power_state(FALSE);
if (bInterruptAllocated) {
free_irq(pSettings->usDspIrq, NULL);
pSettings->bInterruptClaimed = FALSE;
}
return -EIO;
}
int tp3780I_DisableDSP(THINKPAD_BD_DATA * pBDData)
{
int retval = 0;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP entry pBDData %p\n", pBDData);
if (pBDData->bDSPEnabled) {
dsp3780I_DisableDSP(&pBDData->rDspSettings);
if (pSettings->bInterruptClaimed) {
free_irq(pSettings->usDspIrq, NULL);
pSettings->bInterruptClaimed = FALSE;
}
smapi_set_DSP_power_state(FALSE);
pBDData->bDSPEnabled = FALSE;
}
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP exit retval %x\n", retval);
return retval;
}
int tp3780I_ResetDSP(THINKPAD_BD_DATA * pBDData)
{
int retval = 0;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ResetDSP entry pBDData %p\n",
pBDData);
if (dsp3780I_Reset(pSettings) == 0) {
EnableSRAM(pBDData);
} else {
retval = -EIO;
}
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ResetDSP exit retval %x\n", retval);
return retval;
}
int tp3780I_StartDSP(THINKPAD_BD_DATA * pBDData)
{
int retval = 0;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP entry pBDData %p\n", pBDData);
if (dsp3780I_Run(pSettings) == 0) {
// @BUG @TBD EnableSRAM(pBDData);
} else {
retval = -EIO;
}
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP exit retval %x\n", retval);
return retval;
}
int tp3780I_QueryAbilities(THINKPAD_BD_DATA * pBDData, MW_ABILITIES * pAbilities)
{
int retval = 0;
PRINTK_2(TRACE_TP3780I,
"tp3780i::tp3780I_QueryAbilities entry pBDData %p\n", pBDData);
/* fill out standard constant fields */
pAbilities->instr_per_sec = pBDData->rDspSettings.uIps;
pAbilities->data_size = pBDData->rDspSettings.uDStoreSize;
pAbilities->inst_size = pBDData->rDspSettings.uIStoreSize;
pAbilities->bus_dma_bw = pBDData->rDspSettings.uDmaBandwidth;
/* fill out dynamically determined fields */
pAbilities->component_list[0] = 0x00010000 | MW_ADC_MASK;
pAbilities->component_list[1] = 0x00010000 | MW_ACI_MASK;
pAbilities->component_list[2] = 0x00010000 | MW_AIC1_MASK;
pAbilities->component_list[3] = 0x00010000 | MW_AIC2_MASK;
pAbilities->component_list[4] = 0x00010000 | MW_CDDAC_MASK;
pAbilities->component_list[5] = 0x00010000 | MW_MIDI_MASK;
pAbilities->component_list[6] = 0x00010000 | MW_UART_MASK;
pAbilities->component_count = 7;
/* Fill out Mwave OS and BIOS task names */
memcpy(pAbilities->mwave_os_name, TP_ABILITIES_MWAVEOS_NAME,
sizeof(TP_ABILITIES_MWAVEOS_NAME));
memcpy(pAbilities->bios_task_name, TP_ABILITIES_BIOSTASK_NAME,
sizeof(TP_ABILITIES_BIOSTASK_NAME));
PRINTK_1(TRACE_TP3780I,
"tp3780i::tp3780I_QueryAbilities exit retval=SUCCESSFUL\n");
return retval;
}
int tp3780I_ReadWriteDspDStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode,
void __user *pvBuffer, unsigned int uCount,
unsigned long ulDSPAddr)
{
int retval = 0;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
unsigned short usDspBaseIO = pSettings->usDspBaseIO;
BOOLEAN bRC = 0;
PRINTK_6(TRACE_TP3780I,
"tp3780i::tp3780I_ReadWriteDspDStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n",
pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr);
if (pBDData->bDSPEnabled) {
switch (uOpcode) {
case IOCTL_MW_READ_DATA:
bRC = dsp3780I_ReadDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
break;
case IOCTL_MW_READCLEAR_DATA:
bRC = dsp3780I_ReadAndClearDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
break;
case IOCTL_MW_WRITE_DATA:
bRC = dsp3780I_WriteDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
break;
}
}
retval = (bRC) ? -EIO : 0;
PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ReadWriteDspDStore exit retval %x\n", retval);
return retval;
}
int tp3780I_ReadWriteDspIStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode,
void __user *pvBuffer, unsigned int uCount,
unsigned long ulDSPAddr)
{
int retval = 0;
DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
unsigned short usDspBaseIO = pSettings->usDspBaseIO;
BOOLEAN bRC = 0;
PRINTK_6(TRACE_TP3780I,
"tp3780i::tp3780I_ReadWriteDspIStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n",
pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr);
if (pBDData->bDSPEnabled) {
switch (uOpcode) {
case IOCTL_MW_READ_INST:
bRC = dsp3780I_ReadIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
break;
case IOCTL_MW_WRITE_INST:
bRC = dsp3780I_WriteIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
break;
}
}
retval = (bRC) ? -EIO : 0;
PRINTK_2(TRACE_TP3780I,
"tp3780i::tp3780I_ReadWriteDspIStore exit retval %x\n", retval);
return retval;
}