android_kernel_xiaomi_sm8350/arch/ppc/syslib/open_pic.c
Benjamin Herrenschmidt e4ee69c8c1 [PATCH] ppc32: Bump PMU interrupt priority
The Power Management Unit on PowerMacs is very sensitive to timeouts during
async message exchanges.  It uses rather crude protocol based on a shift
register with an interrupt and is almost continuously exchanging messages with
the host CPU on laptops.

This patch adds a routine to the open_pic driver to be able to select a PMU
driver so that it bumps it's interrupt priority to above the normal level.

This will allow PMU interrupts to occur while another interrupt is pending,
and thus reduce the risk of machine beeing abruptly shutdown by the PMU due to
a timeout in PMU communication caused by excessive interrupt latency.  The
problem is very rare, and usually just doesn't happen, but it is still useful
to make things even more robust.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:42 -07:00

1088 lines
28 KiB
C

/*
* arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling
*
* Copyright (C) 1997 Geert Uytterhoeven
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/errno.h>
#include <asm/ptrace.h>
#include <asm/signal.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/open_pic.h>
#include <asm/i8259.h>
#include "open_pic_defs.h"
#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx)
#define OPENPIC_BIG_ENDIAN
#endif
void __iomem *OpenPIC_Addr;
static volatile struct OpenPIC __iomem *OpenPIC = NULL;
/*
* We define OpenPIC_InitSenses table thusly:
* bit 0x1: sense, 0 for edge and 1 for level.
* bit 0x2: polarity, 0 for negative, 1 for positive.
*/
u_int OpenPIC_NumInitSenses __initdata = 0;
u_char *OpenPIC_InitSenses __initdata = NULL;
extern int use_of_interrupt_tree;
static u_int NumProcessors;
static u_int NumSources;
static int open_pic_irq_offset;
static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
static int openpic_cascade_irq = -1;
static int (*openpic_cascade_fn)(struct pt_regs *);
/* Global Operations */
static void openpic_disable_8259_pass_through(void);
static void openpic_set_spurious(u_int vector);
#ifdef CONFIG_SMP
/* Interprocessor Interrupts */
static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *);
#endif
/* Timer Interrupts */
static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
static void openpic_maptimer(u_int timer, cpumask_t cpumask);
/* Interrupt Sources */
static void openpic_enable_irq(u_int irq);
static void openpic_disable_irq(u_int irq);
static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
int is_level);
static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
/*
* These functions are not used but the code is kept here
* for completeness and future reference.
*/
#ifdef notused
static void openpic_enable_8259_pass_through(void);
static u_int openpic_get_spurious(void);
static void openpic_set_sense(u_int irq, int sense);
#endif /* notused */
/*
* Description of the openpic for the higher-level irq code
*/
static void openpic_end_irq(unsigned int irq_nr);
static void openpic_ack_irq(unsigned int irq_nr);
static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
struct hw_interrupt_type open_pic = {
.typename = " OpenPIC ",
.enable = openpic_enable_irq,
.disable = openpic_disable_irq,
.ack = openpic_ack_irq,
.end = openpic_end_irq,
.set_affinity = openpic_set_affinity,
};
#ifdef CONFIG_SMP
static void openpic_end_ipi(unsigned int irq_nr);
static void openpic_ack_ipi(unsigned int irq_nr);
static void openpic_enable_ipi(unsigned int irq_nr);
static void openpic_disable_ipi(unsigned int irq_nr);
struct hw_interrupt_type open_pic_ipi = {
.typename = " OpenPIC ",
.enable = openpic_enable_ipi,
.disable = openpic_disable_ipi,
.ack = openpic_ack_ipi,
.end = openpic_end_ipi,
};
#endif /* CONFIG_SMP */
/*
* Accesses to the current processor's openpic registers
*/
#ifdef CONFIG_SMP
#define THIS_CPU Processor[cpu]
#define DECL_THIS_CPU int cpu = smp_hw_index[smp_processor_id()]
#define CHECK_THIS_CPU check_arg_cpu(cpu)
#else
#define THIS_CPU Processor[0]
#define DECL_THIS_CPU
#define CHECK_THIS_CPU
#endif /* CONFIG_SMP */
#if 1
#define check_arg_ipi(ipi) \
if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
#define check_arg_timer(timer) \
if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
#define check_arg_vec(vec) \
if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
#define check_arg_pri(pri) \
if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
/*
* Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
* data has probably been corrupted and we're going to panic or deadlock later
* anyway --Troy
*/
#define check_arg_irq(irq) \
if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
|| ISR[irq - open_pic_irq_offset] == 0) { \
printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
dump_stack(); }
#define check_arg_cpu(cpu) \
if (cpu < 0 || cpu >= NumProcessors){ \
printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
dump_stack(); }
#else
#define check_arg_ipi(ipi) do {} while (0)
#define check_arg_timer(timer) do {} while (0)
#define check_arg_vec(vec) do {} while (0)
#define check_arg_pri(pri) do {} while (0)
#define check_arg_irq(irq) do {} while (0)
#define check_arg_cpu(cpu) do {} while (0)
#endif
u_int openpic_read(volatile u_int __iomem *addr)
{
u_int val;
#ifdef OPENPIC_BIG_ENDIAN
val = in_be32(addr);
#else
val = in_le32(addr);
#endif
return val;
}
static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
{
#ifdef OPENPIC_BIG_ENDIAN
out_be32(addr, val);
#else
out_le32(addr, val);
#endif
}
static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
{
u_int val = openpic_read(addr);
return val & mask;
}
inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
u_int field)
{
u_int val = openpic_read(addr);
openpic_write(addr, (val & ~mask) | (field & mask));
}
static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
{
openpic_writefield(addr, mask, 0);
}
static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
{
openpic_writefield(addr, mask, mask);
}
static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
u_int field)
{
openpic_setfield(addr, OPENPIC_MASK);
while (openpic_read(addr) & OPENPIC_ACTIVITY);
openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
}
#ifdef CONFIG_SMP
/* yes this is right ... bug, feature, you decide! -- tgall */
u_int openpic_read_IPI(volatile u_int __iomem * addr)
{
u_int val = 0;
#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3)
val = in_be32(addr);
#else
val = in_le32(addr);
#endif
return val;
}
/* because of the power3 be / le above, this is needed */
inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
{
u_int val = openpic_read_IPI(addr);
openpic_write(addr, (val & ~mask) | (field & mask));
}
static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
{
openpic_writefield_IPI(addr, mask, 0);
}
static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
{
openpic_writefield_IPI(addr, mask, mask);
}
static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
{
openpic_setfield_IPI(addr, OPENPIC_MASK);
/* wait until it's not in use */
/* BenH: Is this code really enough ? I would rather check the result
* and eventually retry ...
*/
while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_EPIC_SERIAL_MODE
/* On platforms that may use EPIC serial mode, the default is enabled. */
int epic_serial_mode = 1;
static void __init openpic_eicr_set_clk(u_int clkval)
{
openpic_writefield(&OpenPIC->Global.Global_Configuration1,
OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
}
static void __init openpic_enable_sie(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration1,
OPENPIC_EICR_SIE);
}
#endif
#if defined(CONFIG_EPIC_SERIAL_MODE)
static void openpic_reset(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration0,
OPENPIC_CONFIG_RESET);
while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
OPENPIC_CONFIG_RESET))
mb();
}
#endif
void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
{
volatile OpenPIC_Source __iomem *src = first_ISR;
int i, last_irq;
last_irq = first_irq + num_irqs;
if (last_irq > NumSources)
NumSources = last_irq;
if (src == 0)
src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
for (i = first_irq; i < last_irq; ++i, ++src)
ISR[i] = src;
}
/*
* The `offset' parameter defines where the interrupts handled by the
* OpenPIC start in the space of interrupt numbers that the kernel knows
* about. In other words, the OpenPIC's IRQ0 is numbered `offset' in the
* kernel's interrupt numbering scheme.
* We assume there is only one OpenPIC.
*/
void __init openpic_init(int offset)
{
u_int t, i;
u_int timerfreq;
const char *version;
if (!OpenPIC_Addr) {
printk("No OpenPIC found !\n");
return;
}
OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
#ifdef CONFIG_EPIC_SERIAL_MODE
/* Have to start from ground zero.
*/
openpic_reset();
#endif
if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
switch (t & OPENPIC_FEATURE_VERSION_MASK) {
case 1:
version = "1.0";
break;
case 2:
version = "1.2";
break;
case 3:
version = "1.3";
break;
default:
version = "?";
break;
}
NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
if (NumSources == 0)
openpic_set_sources(0,
((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
NULL);
printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
version, NumProcessors, NumSources, OpenPIC);
timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
if (timerfreq)
printk("OpenPIC timer frequency is %d.%06d MHz\n",
timerfreq / 1000000, timerfreq % 1000000);
open_pic_irq_offset = offset;
/* Initialize timer interrupts */
if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
/* Disabled, Priority 0 */
openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
/* No processor */
openpic_maptimer(i, CPU_MASK_NONE);
}
#ifdef CONFIG_SMP
/* Initialize IPI interrupts */
if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
for (i = 0; i < OPENPIC_NUM_IPI; i++) {
/* Disabled, increased priorities 10..13 */
openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
OPENPIC_VEC_IPI+i+offset);
/* IPIs are per-CPU */
irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi;
}
#endif
/* Initialize external interrupts */
if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
openpic_set_priority(0xf);
/* Init all external sources, including possibly the cascade. */
for (i = 0; i < NumSources; i++) {
int sense;
if (ISR[i] == 0)
continue;
/* the bootloader may have left it enabled (bad !) */
openpic_disable_irq(i+offset);
sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
if (sense & IRQ_SENSE_MASK)
irq_desc[i+offset].status = IRQ_LEVEL;
/* Enabled, Default priority */
openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
(sense & IRQ_POLARITY_MASK),
(sense & IRQ_SENSE_MASK));
/* Processor 0 */
openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
}
/* Init descriptors */
for (i = offset; i < NumSources + offset; i++)
irq_desc[i].handler = &open_pic;
/* Initialize the spurious interrupt */
if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
openpic_disable_8259_pass_through();
#ifdef CONFIG_EPIC_SERIAL_MODE
if (epic_serial_mode) {
openpic_eicr_set_clk(7); /* Slowest value until we know better */
openpic_enable_sie();
}
#endif
openpic_set_priority(0);
if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
}
#ifdef notused
static void openpic_enable_8259_pass_through(void)
{
openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
}
#endif /* notused */
static void openpic_disable_8259_pass_through(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration0,
OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
}
/*
* Find out the current interrupt
*/
u_int openpic_irq(void)
{
u_int vec;
DECL_THIS_CPU;
CHECK_THIS_CPU;
vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
OPENPIC_VECTOR_MASK);
return vec;
}
void openpic_eoi(void)
{
DECL_THIS_CPU;
CHECK_THIS_CPU;
openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
/* Handle PCI write posting */
(void)openpic_read(&OpenPIC->THIS_CPU.EOI);
}
u_int openpic_get_priority(void)
{
DECL_THIS_CPU;
CHECK_THIS_CPU;
return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
OPENPIC_CURRENT_TASK_PRIORITY_MASK);
}
void openpic_set_priority(u_int pri)
{
DECL_THIS_CPU;
CHECK_THIS_CPU;
check_arg_pri(pri);
openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
}
/*
* Get/set the spurious vector
*/
#ifdef notused
static u_int openpic_get_spurious(void)
{
return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
OPENPIC_VECTOR_MASK);
}
#endif /* notused */
static void openpic_set_spurious(u_int vec)
{
check_arg_vec(vec);
openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
vec);
}
#ifdef CONFIG_SMP
/*
* Convert a cpu mask from logical to physical cpu numbers.
*/
static inline cpumask_t physmask(cpumask_t cpumask)
{
int i;
cpumask_t mask = CPU_MASK_NONE;
cpus_and(cpumask, cpu_online_map, cpumask);
for (i = 0; i < NR_CPUS; i++)
if (cpu_isset(i, cpumask))
cpu_set(smp_hw_index[i], mask);
return mask;
}
#else
#define physmask(cpumask) (cpumask)
#endif
void openpic_reset_processor_phys(u_int mask)
{
openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
}
#if defined(CONFIG_SMP) || defined(CONFIG_PM)
static DEFINE_SPINLOCK(openpic_setup_lock);
#endif
#ifdef CONFIG_SMP
/*
* Initialize an interprocessor interrupt (and disable it)
*
* ipi: OpenPIC interprocessor interrupt number
* pri: interrupt source priority
* vec: the vector it will produce
*/
static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
{
check_arg_ipi(ipi);
check_arg_pri(pri);
check_arg_vec(vec);
openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
(pri << OPENPIC_PRIORITY_SHIFT) | vec);
}
/*
* Send an IPI to one or more CPUs
*
* Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
* and not a system-wide interrupt number
*/
void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
{
DECL_THIS_CPU;
CHECK_THIS_CPU;
check_arg_ipi(ipi);
openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
cpus_addr(physmask(cpumask))[0]);
}
void openpic_request_IPIs(void)
{
int i;
/*
* Make sure this matches what is defined in smp.c for
* smp_message_{pass|recv}() or what shows up in
* /proc/interrupts will be wrong!!! --Troy */
if (OpenPIC == NULL)
return;
/* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
openpic_ipi_action, SA_INTERRUPT,
"IPI0 (call function)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
openpic_ipi_action, SA_INTERRUPT,
"IPI1 (reschedule)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
openpic_ipi_action, SA_INTERRUPT,
"IPI2 (invalidate tlb)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
openpic_ipi_action, SA_INTERRUPT,
"IPI3 (xmon break)", NULL);
for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
}
/*
* Do per-cpu setup for SMP systems.
*
* Get IPI's working and start taking interrupts.
* -- Cort
*/
void __devinit do_openpic_setup_cpu(void)
{
#ifdef CONFIG_IRQ_ALL_CPUS
int i;
cpumask_t msk = CPU_MASK_NONE;
#endif
spin_lock(&openpic_setup_lock);
#ifdef CONFIG_IRQ_ALL_CPUS
cpu_set(smp_hw_index[smp_processor_id()], msk);
/* let the openpic know we want intrs. default affinity
* is 0xffffffff until changed via /proc
* That's how it's done on x86. If we want it differently, then
* we should make sure we also change the default values of irq_affinity
* in irq.c.
*/
for (i = 0; i < NumSources; i++)
openpic_mapirq(i, msk, CPU_MASK_ALL);
#endif /* CONFIG_IRQ_ALL_CPUS */
openpic_set_priority(0);
spin_unlock(&openpic_setup_lock);
}
#endif /* CONFIG_SMP */
/*
* Initialize a timer interrupt (and disable it)
*
* timer: OpenPIC timer number
* pri: interrupt source priority
* vec: the vector it will produce
*/
static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
{
check_arg_timer(timer);
check_arg_pri(pri);
check_arg_vec(vec);
openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
(pri << OPENPIC_PRIORITY_SHIFT) | vec);
}
/*
* Map a timer interrupt to one or more CPUs
*/
static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
{
cpumask_t phys = physmask(cpumask);
check_arg_timer(timer);
openpic_write(&OpenPIC->Global.Timer[timer].Destination,
cpus_addr(phys)[0]);
}
/*
* Change the priority of an interrupt
*/
void __init
openpic_set_irq_priority(u_int irq, u_int pri)
{
check_arg_irq(irq);
openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
OPENPIC_PRIORITY_MASK,
pri << OPENPIC_PRIORITY_SHIFT);
}
/*
* Initalize the interrupt source which will generate an NMI.
* This raises the interrupt's priority from 8 to 9.
*
* irq: The logical IRQ which generates an NMI.
*/
void __init
openpic_init_nmi_irq(u_int irq)
{
check_arg_irq(irq);
openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
}
/*
*
* All functions below take an offset'ed irq argument
*
*/
/*
* Hookup a cascade to the OpenPIC.
*/
static struct irqaction openpic_cascade_irqaction = {
.handler = no_action,
.flags = SA_INTERRUPT,
.mask = CPU_MASK_NONE,
};
void __init
openpic_hookup_cascade(u_int irq, char *name,
int (*cascade_fn)(struct pt_regs *))
{
openpic_cascade_irq = irq;
openpic_cascade_fn = cascade_fn;
if (setup_irq(irq, &openpic_cascade_irqaction))
printk("Unable to get OpenPIC IRQ %d for cascade\n",
irq - open_pic_irq_offset);
}
/*
* Enable/disable an external interrupt source
*
* Externally called, irq is an offseted system-wide interrupt number
*/
static void openpic_enable_irq(u_int irq)
{
volatile u_int __iomem *vpp;
check_arg_irq(irq);
vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
openpic_clearfield(vpp, OPENPIC_MASK);
/* make sure mask gets to controller before we return to user */
do {
mb(); /* sync is probably useless here */
} while (openpic_readfield(vpp, OPENPIC_MASK));
}
static void openpic_disable_irq(u_int irq)
{
volatile u_int __iomem *vpp;
u32 vp;
check_arg_irq(irq);
vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
openpic_setfield(vpp, OPENPIC_MASK);
/* make sure mask gets to controller before we return to user */
do {
mb(); /* sync is probably useless here */
vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
}
#ifdef CONFIG_SMP
/*
* Enable/disable an IPI interrupt source
*
* Externally called, irq is an offseted system-wide interrupt number
*/
void openpic_enable_ipi(u_int irq)
{
irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
check_arg_ipi(irq);
openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
}
void openpic_disable_ipi(u_int irq)
{
irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
check_arg_ipi(irq);
openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
}
#endif
/*
* Initialize an interrupt source (and disable it!)
*
* irq: OpenPIC interrupt number
* pri: interrupt source priority
* vec: the vector it will produce
* pol: polarity (1 for positive, 0 for negative)
* sense: 1 for level, 0 for edge
*/
static void __init
openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
{
openpic_safe_writefield(&ISR[irq]->Vector_Priority,
OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
(pri << OPENPIC_PRIORITY_SHIFT) | vec |
(pol ? OPENPIC_POLARITY_POSITIVE :
OPENPIC_POLARITY_NEGATIVE) |
(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
}
/*
* Map an interrupt source to one or more CPUs
*/
static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
{
if (ISR[irq] == 0)
return;
if (!cpus_empty(keepmask)) {
cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
cpus_and(irqdest, irqdest, keepmask);
cpus_or(physmask, physmask, irqdest);
}
openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
}
#ifdef notused
/*
* Set the sense for an interrupt source (and disable it!)
*
* sense: 1 for level, 0 for edge
*/
static void openpic_set_sense(u_int irq, int sense)
{
if (ISR[irq] != 0)
openpic_safe_writefield(&ISR[irq]->Vector_Priority,
OPENPIC_SENSE_LEVEL,
(sense ? OPENPIC_SENSE_LEVEL : 0));
}
#endif /* notused */
/* No spinlocks, should not be necessary with the OpenPIC
* (1 register = 1 interrupt and we have the desc lock).
*/
static void openpic_ack_irq(unsigned int irq_nr)
{
#ifdef __SLOW_VERSION__
openpic_disable_irq(irq_nr);
openpic_eoi();
#else
if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
openpic_eoi();
#endif
}
static void openpic_end_irq(unsigned int irq_nr)
{
#ifdef __SLOW_VERSION__
if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
&& irq_desc[irq_nr].action)
openpic_enable_irq(irq_nr);
#else
if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
openpic_eoi();
#endif
}
static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
{
openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
}
#ifdef CONFIG_SMP
static void openpic_ack_ipi(unsigned int irq_nr)
{
openpic_eoi();
}
static void openpic_end_ipi(unsigned int irq_nr)
{
}
static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *regs)
{
smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset, regs);
return IRQ_HANDLED;
}
#endif /* CONFIG_SMP */
int
openpic_get_irq(struct pt_regs *regs)
{
int irq = openpic_irq();
/*
* Check for the cascade interrupt and call the cascaded
* interrupt controller function (usually i8259_irq) if so.
* This should move to irq.c eventually. -- paulus
*/
if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
int cirq = openpic_cascade_fn(regs);
/* Allow for the cascade being shared with other devices */
if (cirq != -1) {
irq = cirq;
openpic_eoi();
}
} else if (irq == OPENPIC_VEC_SPURIOUS)
irq = -1;
return irq;
}
#ifdef CONFIG_SMP
void
smp_openpic_message_pass(int target, int msg, unsigned long data, int wait)
{
cpumask_t mask = CPU_MASK_ALL;
/* make sure we're sending something that translates to an IPI */
if (msg > 0x3) {
printk("SMP %d: smp_message_pass: unknown msg %d\n",
smp_processor_id(), msg);
return;
}
switch (target) {
case MSG_ALL:
openpic_cause_IPI(msg, mask);
break;
case MSG_ALL_BUT_SELF:
cpu_clear(smp_processor_id(), mask);
openpic_cause_IPI(msg, mask);
break;
default:
openpic_cause_IPI(msg, cpumask_of_cpu(target));
break;
}
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_PM
/*
* We implement the IRQ controller as a sysdev and put it
* to sleep at powerdown stage (the callback is named suspend,
* but it's old semantics, for the Device Model, it's really
* powerdown). The possible problem is that another sysdev that
* happens to be suspend after this one will have interrupts off,
* that may be an issue... For now, this isn't an issue on pmac
* though...
*/
static u32 save_ipi_vp[OPENPIC_NUM_IPI];
static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
static int openpic_suspend_count;
static void openpic_cached_enable_irq(u_int irq)
{
check_arg_irq(irq);
save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
}
static void openpic_cached_disable_irq(u_int irq)
{
check_arg_irq(irq);
save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
}
/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
* we need something better to deal with that... Maybe switch to S1 for
* cpufreq changes
*/
int openpic_suspend(struct sys_device *sysdev, u32 state)
{
int i;
unsigned long flags;
spin_lock_irqsave(&openpic_setup_lock, flags);
if (openpic_suspend_count++ > 0) {
spin_unlock_irqrestore(&openpic_setup_lock, flags);
return 0;
}
openpic_set_priority(0xf);
open_pic.enable = openpic_cached_enable_irq;
open_pic.disable = openpic_cached_disable_irq;
for (i=0; i<NumProcessors; i++) {
save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
}
for (i=0; i<OPENPIC_NUM_IPI; i++)
save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
for (i=0; i<NumSources; i++) {
if (ISR[i] == 0)
continue;
save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
}
spin_unlock_irqrestore(&openpic_setup_lock, flags);
return 0;
}
/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
* we need something better to deal with that... Maybe switch to S1 for
* cpufreq changes
*/
int openpic_resume(struct sys_device *sysdev)
{
int i;
unsigned long flags;
u32 vppmask = OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
OPENPIC_MASK;
spin_lock_irqsave(&openpic_setup_lock, flags);
if ((--openpic_suspend_count) > 0) {
spin_unlock_irqrestore(&openpic_setup_lock, flags);
return 0;
}
/* OpenPIC sometimes seem to need some time to be fully back up... */
do {
openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
} while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
!= OPENPIC_VEC_SPURIOUS);
openpic_disable_8259_pass_through();
for (i=0; i<OPENPIC_NUM_IPI; i++)
openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
save_ipi_vp[i]);
for (i=0; i<NumSources; i++) {
if (ISR[i] == 0)
continue;
openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
/* make sure mask gets to controller before we return to user */
do {
openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
} while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
!= (save_irq_src_vp[i] & vppmask));
}
for (i=0; i<NumProcessors; i++)
openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
save_cpu_task_pri[i]);
open_pic.enable = openpic_enable_irq;
open_pic.disable = openpic_disable_irq;
openpic_set_priority(0);
spin_unlock_irqrestore(&openpic_setup_lock, flags);
return 0;
}
#endif /* CONFIG_PM */
static struct sysdev_class openpic_sysclass = {
set_kset_name("openpic"),
};
static struct sys_device device_openpic = {
.id = 0,
.cls = &openpic_sysclass,
};
static struct sysdev_driver driver_openpic = {
#ifdef CONFIG_PM
.suspend = &openpic_suspend,
.resume = &openpic_resume,
#endif /* CONFIG_PM */
};
static int __init init_openpic_sysfs(void)
{
int rc;
if (!OpenPIC_Addr)
return -ENODEV;
printk(KERN_DEBUG "Registering openpic with sysfs...\n");
rc = sysdev_class_register(&openpic_sysclass);
if (rc) {
printk(KERN_ERR "Failed registering openpic sys class\n");
return -ENODEV;
}
rc = sysdev_register(&device_openpic);
if (rc) {
printk(KERN_ERR "Failed registering openpic sys device\n");
return -ENODEV;
}
rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
if (rc) {
printk(KERN_ERR "Failed registering openpic sys driver\n");
return -ENODEV;
}
return 0;
}
subsys_initcall(init_openpic_sysfs);